From the Sector

Reset
4 results
STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection © KARL MAYER STOLL Textilmaschinenfabrik GmbH, photographer Rafael Krötz for ssawstudio.com
STOLL trend collection "WONDERFUL“
06.04.2022

"WONDERFUL" by STOLL

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

Accordingly, the new trend collection serves different areas of application: Extraordinary STOLL-knit and wear® products in the new gauge of E 10.2 and in established gauges, such as E 7.2, inspire the market for seamless articles. Extravagant combinations of intarsia, STOLL-weave-in® and STOLL-ikat plating® techniques create novel pattern possibilities, material usages and color impressions. The possibility of individualization is supported by selected products via STOLL-autocreate®.

The trend collection causes amazement, but also stands for responsibility and environmental awareness. One chapter presents a sustainable footwear fabric solution that was created in collaboration with renowned players in textile value creation.

"WONDERFUL" was launched in March 2022. The first presentations took place in front of customers in Italy and were a great success. "Our "WONDERFUL" designs were very well received. Some customers have adopted the new pattern options contained there directly into their current collection, and ordered the necessary technical kids to convert their machines," explains Jörg Hartmann, Head of Fashion & Technology at STOLL with satisfaction.

02.03.2021

STOLL Webinar for Fashion Council Germany

  • On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

  • On 22.03 STOLL will offer a webinar through the online platform of Fashion Council Germany on the topic of digitalisation and sustainability in STOLL flat knitting.

Webinar Description
Digitalisation and sustainability are becoming increasingly essential for the success and existence of fashion companies. The flat knitting industry with its immense flexibility and diversity offers many opportunities for digital solutions and sustainable practices. In this webinar, Karl Mayer Stoll will share how digital design tools enable more sustainable knitwear development.

Fashion Council Germany
The FCG is the patron to strengthen the German fashion and design landscape for a visionary, technological & sustainable future in a global market.
The Fashion Council Germany represents the interests of fashion "designed in Germany". Founded in January 2015 in Berlin. On the initiative of national industry experts, the Fashion Council Germany promotes German fashion design as a cultural and economic asset and supports young designers from Germany. In addition to the promotion of young designers, special attention is paid to education, sustainability and fashion technology as well as to the promotion of cross-disciplinary dialogue and networking. Against this background, the Council carries out essential lobbying work in politics, business and culture, strives for visibility and emphasises the global relevance of fashion design and Germany as a fashion location at home and abroad.

Since the beginning of last year, the FCG offers workshops on various business topics in the fashion industry. Until further notice, all FCG seminars will take place online due to the Corona crisis.

 

Source:

KARL MAYER STOLL Textilmaschinenfabrik GmbH

Coating expertise brings sustainable comfort and convenience to the face mask (c) A. Monforts Textilmaschinen GmbH & Co. KG
The masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride
21.09.2020

Coating expertise brings sustainable comfort and convenience to the face mask

  • Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
  • Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

  • Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
  • Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

A third Montex stenter line was installed at the company’s Grefrath plant in 2015, by which time the company had grown to 40 people and a major new market had opened up in the supply of fabrics for promotional materials at exhibitions and trade shows.

“We had a fantastic two years in 2018 and 2019 and everything was going great for the first three months of this year, but in April it all came crashing down,” said Oliver Hurtz. “Coronavirus put an end to trade shows in 2020, which had a very serious impact on our business.”

At the same time, however, the company was exploring the potential of a new biocidal product from one of its chemicals suppliers which has both antiviral and antimicrobial properties.

Filtration

“We had already been producing coated fabrics for hot gas filtration and realised that in combination with this new microporous coating we had the basis for a very effective single-layer face mask,” Rainer said. “Achieving this with a single layer product rather than the usual three has resulted in a significant advance in comfort for the wearer and because the mask is able to disinfect itself and helps regulate humidity, it can be worn a number of times without needing to be washed, for greater convenience. It only needs to be washed when it gets dirty and can also be washed up to twenty times without losing its properties, which has to be preferable to single-use disposables.”

Catus face masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride certified to ISO 20743 for their antibacterial effect, and to ISO 18184 for their antiviral effect.

They are proven to  eliminate over  99.99% of the human coronavirus 229 E, with the multiplication of microorganisms such as germs and bacteria prevented by the biostatic action of silver salts and viruses destroyed by oxygen-releasing substances and a mechanism that attacks their fatty envelope. The virus membrane loses its cholesterol content and the virus is inactivated.

Colours

Gorilla Protect next plans to make the masks available in four colours – black, Bordeaux, olive and grey – and is also working on colour branding and printing labels.

“It’s not possible to print on the surface of the mask after it has been coated, but its is possible for volume orders to be printed before the treatment,” Oliver Hurtz said.

“Face masks are going to become an established part of life in the West like they are in Asia and need to be as comfortable and convenient as possible for the wearer,” his father concluded. “With these things in mind, we believe Catus is a significant step forward.”

TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken © Mirko Krziwon_ITM/TU Dresden
TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken
21.04.2020

TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken

  • Anforderungs- und passformgerechte textile 3D-gestrickte Mund-Nasen-Masken – Weitere Initiativen am ITM der TU Dresden

Seit dem 20. April 2020 gilt für das Bundesland Sachsen eine Maskenpflicht beim Einkaufen und im öffentlichen Personen- und Nahverkehr. Eine entsprechende Verordnung wurde hierfür am 17. April 2020 vom Freistaat Sachsen bekannt gegeben.

Aufgrund der neuerlassenen Allgemeinverfügung und der damit einhergehenden, notwendi-gen Schutzmaßnahmen zur Verringerung der Ausbreitung von COVID-19 wird das Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden nach der am 20. April 2020 erfolgten Wiederaufnahme des laborbasierten Forschungsbetriebes die bereits in der ITM-Pressemitteilung vom 31. März 2020 vorgestellte textile, 3D-gestrickte Mund-Nasen-Maske intensiv weiterentwickeln. Das ITM möchte damit einen wichtigen aktiven Beitrag zum Schutz der Gesundheit der Bevölkerung leisten.

  • Anforderungs- und passformgerechte textile 3D-gestrickte Mund-Nasen-Masken – Weitere Initiativen am ITM der TU Dresden

Seit dem 20. April 2020 gilt für das Bundesland Sachsen eine Maskenpflicht beim Einkaufen und im öffentlichen Personen- und Nahverkehr. Eine entsprechende Verordnung wurde hierfür am 17. April 2020 vom Freistaat Sachsen bekannt gegeben.

Aufgrund der neuerlassenen Allgemeinverfügung und der damit einhergehenden, notwendi-gen Schutzmaßnahmen zur Verringerung der Ausbreitung von COVID-19 wird das Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden nach der am 20. April 2020 erfolgten Wiederaufnahme des laborbasierten Forschungsbetriebes die bereits in der ITM-Pressemitteilung vom 31. März 2020 vorgestellte textile, 3D-gestrickte Mund-Nasen-Maske intensiv weiterentwickeln. Das ITM möchte damit einen wichtigen aktiven Beitrag zum Schutz der Gesundheit der Bevölkerung leisten.

Hierfür sind in den letzten Tagen die Kooperationen mit langjährigen Netzwerkpartnern des ITM wei-ter intensiviert worden. Gemeinsam mit der renommierten Textilmaschinenfirma H. Stoll AG & Co. KG aus Reutlingen ist es gelungen, mit dem am ITM erarbeiteten technologischen Know-how auf einer am ITM der TU Dresden installierten Flachstrickmaschine Stoll ADF 530-32 BW weitere Vari-anten neuartiger, textiler 3D-gestrickter Mund-Nasen-Masken erfolgreich umzusetzen.

Am ITM können somit Mund-Nasen-Masken-Varianten mit unterschiedlichsten Materialkombinatio-nen auf Flachstrickmaschinen von zwei Maschinenherstellern, die sich alle als waschbarer und damit wiederverwendbarer Mund-Nasen-Schutz eignen, anforderungs- und passformgerecht gefertigt wer-den. Je nach Materialzusammensetzung sind die Mehrwegmasken für Kochwäsche mit handelsübli-chen Waschmitteln bzw. bei 60° mit Desinfektionswaschmittel geeignet. Bei den Masken kann wahl-weise eine Tasche direkt im Fertigungsprozess integriert werden, in die temporär noch zusätzlich Fil-terstrukturen eingelegt werden können. Die gestrickten Mund-Nasen-Masken sind – intuitiv, schnell, unkompliziert in der Handhabung – auch für Brillenträger geeignet und erfordern beim Anlegen keine Hilfe einer weiteren Person. Mittels weiterer anforderungsgerechter Materialkombinationen können auch spezifische Eigenschaften, wie z. B. Atmungsaktivität, Tragekomfort und Hautverträglichkeit, ge-zielt eingestellt und diesbezüglich im Rahmen erster freiwilliger Versuchsreihen mit Mitarbeitern des ITM intensiv getestet werden.

Als eines der weltweit führenden Textilforschungsinstitute wird das ITM mit der lösungssystemati-schen Entwicklung anforderungsgerechter Mund-Nasen-Masken einen wichtigen gesellschaftlichen und nachhaltigen Beitrag für das Gemeinwohl der Bevölkerung leisten. Das Team des ITM, welches maßgeblich bei der Maskenentwicklung involviert ist, freut sich daher auf weitere Anfragen von Her-stellern und Produzenten, um mit dem erarbeiteten Fachwissen bzw. Erfahrungen und technologi-schem Know-how insbesondere die KMU der deutschen Textilindustrie beratend zu unterstützen und ggf. gemeinsame Allianzen/Kooperationen zu schmieden.

Bereits jetzt schon steht das ITM mit mehreren Industriepartnern in Kontakt, um die Technologie zur Fertigung von textilen 3D-gestrickten Masken schnell in die Serienproduktion zu überführen und dar-über hinaus diese anforderungsgerechten textilen Produkte auch zeitnah als nach den geltenden Standards bzw. Richtlinien zugelassene Schutzmasken anzubieten.

Für die zielführenden Untersuchungen mit variablen Materialkombinationen zur weiteren Op-timierung der unterschiedlichen Maskenvarianten wurden dem ITM bereits verschiedenste Versuchsmaterialien kostenfrei zur Verfügung gestellt. Das ITM bedankt sich hierfür bei folgenden Firmen: EMS-CHEMIE AG, Gebrüder Otto GmbH & Co. KG, TWD Fibres GmbH und W. Zimmermann GmbH & Co. KG.
 

Source:

Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)