From the Sector

Reset
37 results
workshop schedule 2024 Association of the Nonwoven Fabrics Industry
12.12.2023

INDA, NWI announce 2024 Nonwovens Training Courses Schedule

INDA, the Association of the Nonwoven Fabrics Industry, and The Nonwovens Institute (NWI), have announced their 2024 workforce development program. The INDA/NWI portfolio of training content covers the full spectrum of the nonwovens value chain, ranging from raw materials to processes to products.

Jointly organized courses include a combination of classroom learning supported by hands-on activities in NWI’s world-class nonwoven production and testing labs on the Centennial Campus of North Carolina State University. Each course is designed to be accessible and valuable to those who are new to the nonwovens industry and/or come from a non-technical background, as well as seasoned nonwovens professionals.

2024 INDA/NWI Workshops Schedule:

INDA, the Association of the Nonwoven Fabrics Industry, and The Nonwovens Institute (NWI), have announced their 2024 workforce development program. The INDA/NWI portfolio of training content covers the full spectrum of the nonwovens value chain, ranging from raw materials to processes to products.

Jointly organized courses include a combination of classroom learning supported by hands-on activities in NWI’s world-class nonwoven production and testing labs on the Centennial Campus of North Carolina State University. Each course is designed to be accessible and valuable to those who are new to the nonwovens industry and/or come from a non-technical background, as well as seasoned nonwovens professionals.

2024 INDA/NWI Workshops Schedule:

  • Elementary Nonwovens
    January 23-24, 2024
  • Intermediate Nonwovens
    February 6-9, 2024
  • Meltblown Technology
    February 27-29, 2024
  • Spunbond Technology
    March 19-21, 2024
  • Intermediate Nonwovens
    April 30-May 3, 2024
  • Elementary Nonwovens
    May 7-8, 2024
  • Nonwoven Fabric Property Development and Characterization
    June 4-7, 2024
  • WIPES Academy
    June 17-18, 2024
  • Fiber and Filament Extrusion Fundamentals
    July 24-27, 2024
  • Nonwoven Product Development and Innovation
    August 13-16, 2024
  • Absorbent Hygiene Course
    August 27-29, 2024
  • Elementary Nonwovens
    September 10-11, 2024
  • Carded Nonwovens Technology
    October 3, 2024
  • Intermediate Nonwovens
    October 15-19, 2024

Short Course Value Packs

New this year, INDA and NWI are offering a Short Course Value Pack program, enabling companies to purchase a block of registrations, which can be used by any combination of employees to register for any combination of training courses, at a discounted rate. Value Packs are available in bundles of 5, 10, 15, and 20 registrations, with discounts ranging from 10 percent to 25 percent, depending on the size of the Value Pack.

More information:
INDA nonwovens workshop schedule
Source:

Association of the Nonwoven Fabrics Industry

FET: Benefits of new polymer development (c) FET
FET’s Fibre Development Centre
06.10.2023

FET: Benefits of new polymer development

Fibre Extrusion Technology Ltd (FET) of Leeds, UK is celebrating a year of achievements since its new Fibre Development Centre was first opened. This period has shown a marked acceleration in the number of client technical trials conducted, involving the ever-increasing development of new polymers.

FET designs, develops and manufactures extrusion equipment for a range of high value textile material applications worldwide, offering melt spinning, wet spinning and spunbond/meltblown options. Since its inception in 1997, a major part of FET’s service portfolio has always been to collaborate with industrial and research establishments in testing, evaluating and developing high value materials with diverse, functional properties. FET’s previous Process Development Laboratory presided over the development of about 60 new polymer types in multifilament, monofilament and nonwoven formats.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK is celebrating a year of achievements since its new Fibre Development Centre was first opened. This period has shown a marked acceleration in the number of client technical trials conducted, involving the ever-increasing development of new polymers.

FET designs, develops and manufactures extrusion equipment for a range of high value textile material applications worldwide, offering melt spinning, wet spinning and spunbond/meltblown options. Since its inception in 1997, a major part of FET’s service portfolio has always been to collaborate with industrial and research establishments in testing, evaluating and developing high value materials with diverse, functional properties. FET’s previous Process Development Laboratory presided over the development of about 60 new polymer types in multifilament, monofilament and nonwoven formats.

Since the new Fibre Development Centre came on stream, this process has accelerated and the number of new polymers has now increased to over 70, with considerably enhanced facilities more than doubling capacity and increasing efficiency. Clients frequently spend several days on site participating in development trials and technical sales meetings, so the new Centre is designed to make their stay even more efficient and comfortable.

With more new trials booked for the rest of the year and well into 2024, it is expected that many more new polymers will be developed, with sustainable fibres leading the way.

Source:

Fibre Extrusion Technology Ltd (FET)

seat belts Photo Oerlikon Textile GmbH & Co. KG
07.09.2023

Oerlikon Polymer Processing Solutions at the Techtextil India 2023

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
The yarns used in airbags are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technol-ogies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants - without any loss of function in any climate and for the lifetime of the vehicle

Buckle up!
Seat belts have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments. “With our unique, patented Single Filament Layer Technology, we offer a sophisticated and simultaneously gentle high-tenacity (HT) yarn process for manufacturing these lifesavers and other applications made from industrial yarn”, explains André Wissenberg, Head of Marketing.

Road reinforcement using geotextiles
Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demand-ing tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC –  quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

Source:

Oerlikon Textile GmbH & Co. KG

Photo: Naturopera
22.05.2023

ANDRITZ converting line for baby diapers at Naturopera, France

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

The ANDRITZ converting machine operating at Naturopera is highly flexible, taking just a few settings to switch to the production of bio-based diapers. It is designed for a multiple-size process, features an operator-friendly interface, and guarantees a production speed of 800 ppm.

Naturopera is a French company producing baby care, femcare and household products with a strong focus on local production and sustainability.

Source:

Andritz AG

Radici's booth at Index Graphic Radici
17.04.2023

RadiciGroup presents high-resistance sustainable nonwovens at Index

  • Spunbond, meltblown and composite structures for new market opportunities

RadiciGroup is participating with its Advanced Textile Solutions business area at Index in Geneva from 18 to 21 April 2023. Among the Group’s products showcased are spunbond and meltblown for different application sectors, such as roofing, construction, automotive, HO.RE.CA. and filtration.

“The key message we are bringing to the fair is sustainability,” noted Enrico Buriani, CEO of the Nonwovens division of RadiciGroup Advanced Textile Solutions. “Those who already know us know that, for many years, the Group has been focused on proposing low environmental impact products and processes where sustainability is scientifically measured or certified by independent third parties. Our company is dedicated to nonwovens, which, by the way, are produced using 100% renewable energy. We have expanded our portfolio of innovative solutions for customers interested in realizing projects with sustainability as an essential requirement.”

  • Spunbond, meltblown and composite structures for new market opportunities

RadiciGroup is participating with its Advanced Textile Solutions business area at Index in Geneva from 18 to 21 April 2023. Among the Group’s products showcased are spunbond and meltblown for different application sectors, such as roofing, construction, automotive, HO.RE.CA. and filtration.

“The key message we are bringing to the fair is sustainability,” noted Enrico Buriani, CEO of the Nonwovens division of RadiciGroup Advanced Textile Solutions. “Those who already know us know that, for many years, the Group has been focused on proposing low environmental impact products and processes where sustainability is scientifically measured or certified by independent third parties. Our company is dedicated to nonwovens, which, by the way, are produced using 100% renewable energy. We have expanded our portfolio of innovative solutions for customers interested in realizing projects with sustainability as an essential requirement.”

Respunsible® is a spunbond brand manufactured from recycled polypropylene. A preliminary Life Cycle Assessment (LCA) study was carried out by RadiciGroup to demonstrate the correlation between the reduction in environmental impact and the percentage increase in recycled material. The final results demonstrate that a variable percentage of from 50 to 70% recycled material leads to a reduction in CO2 emissions of from 30 to 40%, compared to a fabric made of 100% virgin material, without comprising high technical performance.

Additionally, since RadiciGroup has achieved ISCC PLUS certification (International Sustainability and Carbon Certification), it can offer bio, biocircular or circular polypropylene spunbond and meltblown nonwovens, in which the sustainable polypropylene is biomass balanced. This certification signifies traceability along the supply chain and verifies that the certified companies meet high environmental and social standards.

“Since 2020, we have had a technologically advanced meltblown production line,” Mr. Buriani concluded. “This allows us to make composite structures, sold under the brand name Radimelt®. Now our goal is to expand our filtration applications, diversifying and developing new business, for instance vacuum cleaner bags or HVAC (heating, ventilation and air conditioning) system filters, where we can meet the high efficiency and mechanical resistance demanded, thanks to our latest generation technology.”

More information:
nonwovens RadiciGroup INDEX
Source:

Radici Group

14.04.2023

Avgol® at INDEX™ 23

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s INDEXTM exhibition in Switzerland to showcase how it has a laser focus on delivering against sustainability objectives to safeguard the future.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers, spunbond, meltblown and SMS for diversified end-use markets at the event. Avgol will present and be available to discuss with visitors how this developing technology and the company’s other related products can help businesses achieve their 2030 sustainability goals.

Avgol will also highlight the latest solutions since recently announcing its collaboration with Algaeing™. Avgol uses patented algae bio-based formulations for colorants in its products, combining a unique environmental solution for modifying the aesthetic qualities of materials with Avgol’s ongoing commitment to sustainable polyolefin based spunbond and meltblown fabrics.

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s INDEXTM exhibition in Switzerland to showcase how it has a laser focus on delivering against sustainability objectives to safeguard the future.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers, spunbond, meltblown and SMS for diversified end-use markets at the event. Avgol will present and be available to discuss with visitors how this developing technology and the company’s other related products can help businesses achieve their 2030 sustainability goals.

Avgol will also highlight the latest solutions since recently announcing its collaboration with Algaeing™. Avgol uses patented algae bio-based formulations for colorants in its products, combining a unique environmental solution for modifying the aesthetic qualities of materials with Avgol’s ongoing commitment to sustainable polyolefin based spunbond and meltblown fabrics.

Source:

Avgol / PHD Marketing Ltd

(c) SABIC
05.04.2023

SABIC presents portfolio for healthcare and hygiene market at INDEX™23

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

The company’s PURECARES polyolefin products are based on technologies free of both tris (nonylphenyl) phosphite (TNPP) and phthalates. Consumer comfort is achieved by using SABIC polypropylene (PP) and polyethylene (PE) polymers for bi-component fibers to answer multiple needs for soft and loft handfeel nonwovens, enabling easy lamination to other building blocks on medical nonwovens or absorbent hygiene applications.

In addition, SABIC produces TRUCIRCLE certified circular polymers for its PURECARES PP and PE portfolio with feedstock based on advanced recycling of mixed and used plastic that would otherwise typically not be suitable for mechanical recycling processes. These more sustainable solutions can be adopted in downstream processes as direct drop-in alternatives to incumbent materials with no compromise in production efficiency, purity and product performance.

Source:

SABIC

Photo Fibre Extrusion Technology Ltd (FET)
23.03.2023

FET prepares for INDEX 23 Exhibition in Geneva

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will shortly be exhibiting at INDEX 23, the leading nonwovens exhibition in Geneva, 18-21 April.

As well as featuring its latest meltblown and spunbond technology, FET will focus on its new Fibre Development Centre. Construction and fit-out of this new purpose-built building is now fully operational. This modern two-storey development provides state-of-the-art facilities, including enhanced laboratory for client testing and product development.

Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients across the globe and will enable continued growth of the company through innovation.  

Complementing FET’s highly successful meltblown technology, the more recent spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will shortly be exhibiting at INDEX 23, the leading nonwovens exhibition in Geneva, 18-21 April.

As well as featuring its latest meltblown and spunbond technology, FET will focus on its new Fibre Development Centre. Construction and fit-out of this new purpose-built building is now fully operational. This modern two-storey development provides state-of-the-art facilities, including enhanced laboratory for client testing and product development.

Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients across the globe and will enable continued growth of the company through innovation.  

Complementing FET’s highly successful meltblown technology, the more recent spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

Source:

Fibre Extrusion Technology Ltd (FET)

(c) Avgol
The Avgol nonwoven fabric, colored using Algaeing formulations, in production
10.02.2023

Avgol® showcases Algaeing™ bio-based colorants and fibers at FILTECH

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s FILTECH exhibition in Germany to showcase its latest developments in using Algaeing™’s patented algae bio-based formulations for colorants and fibers.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers and meltblown for diversified end-use markets at the event from 14-16 February. Avgol will discuss with visitors how this new technology and the company’s biotransformative products can help businesses achieve their 2030 sustainability goals.

Algaeing’s technologies utilize various sustainably sourced, vertically farmed algae species to produce a wide range of appealing colors, many of which replicate the colors used in nonwoven fabrics today.

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s FILTECH exhibition in Germany to showcase its latest developments in using Algaeing™’s patented algae bio-based formulations for colorants and fibers.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers and meltblown for diversified end-use markets at the event from 14-16 February. Avgol will discuss with visitors how this new technology and the company’s biotransformative products can help businesses achieve their 2030 sustainability goals.

Algaeing’s technologies utilize various sustainably sourced, vertically farmed algae species to produce a wide range of appealing colors, many of which replicate the colors used in nonwoven fabrics today.

“The benefits of using an algae bio-source go far beyond the removal of chemically synthesized colorants, and include synergistic benefits of vastly reduced water consumption, chemical and fertilizer use, and carbon dioxide emissions,” says Avgol CEO Tommi Bjornman. “We will be demonstrating to FILTECH visitors that following an extensive development path, the fibers both absorb and retain a range of colors - such as vibrant greens and blues – and that we can even deliver a ‘heathered’ appearance for a more natural looking material, all without affecting the filtration, barrier quality or feel of the final product.”

Source:

Avgol / PHD Marketing Ltd

30.12.2022

Avgol® announces new line investment at US facility

Avgol® has announced a significant investment in a new high-speed, high-capacity flexible multiple beam production line at its facility in Mocksville, USA.

Avgol, an Indorama Ventures Limited company, is a leader in the hygiene market with a comprehensive range of ultra-lightweight spun-melt nonwoven fabrics. This new, sixth line at the company’s facility in Mocksville will see Avgol investing in new Reicofil 5 (RF5) technology and underlines the company’s commitment to the region as a domestic supplier. The investment will deliver biocomponent and corresponding high-loft capabilities, with the line producing materials for applications that meet the needs of upper tier products for Hygiene customers.

As part of the investment, Avgol is also introducing extra capacity for meltblown production, ensuring a continuous supply of this critical material for both the region and customers worldwide.

Another aspect of the investment includes the addition of cutting-edge lamination capabilities, which enables Avgol to offer enhanced performance products into the existing markets the company serves, as well as to explore new opportunities in other markets.

Avgol® has announced a significant investment in a new high-speed, high-capacity flexible multiple beam production line at its facility in Mocksville, USA.

Avgol, an Indorama Ventures Limited company, is a leader in the hygiene market with a comprehensive range of ultra-lightweight spun-melt nonwoven fabrics. This new, sixth line at the company’s facility in Mocksville will see Avgol investing in new Reicofil 5 (RF5) technology and underlines the company’s commitment to the region as a domestic supplier. The investment will deliver biocomponent and corresponding high-loft capabilities, with the line producing materials for applications that meet the needs of upper tier products for Hygiene customers.

As part of the investment, Avgol is also introducing extra capacity for meltblown production, ensuring a continuous supply of this critical material for both the region and customers worldwide.

Another aspect of the investment includes the addition of cutting-edge lamination capabilities, which enables Avgol to offer enhanced performance products into the existing markets the company serves, as well as to explore new opportunities in other markets.

 

Source:

Avgol by Indorama Ventures Limited / PHD Marketing Ltd

24.05.2022

INDA Releases 2022 Nonwovens Supply Report

Report Offers INDA Members Key Metrics to Assist in Strategic Planning and Investments

INDA, the Association of the Nonwovens Fabrics Industry, announces publication of the ninth edition of the annual North American Nonwovens Supply Report for its members.

Based on extensive research, producer surveys and interviews with industry leaders, the report provides an overall view of North American supply, including the key metrics of capacity, production and operating rates, in addition to regional trade, through the year 2021. The 75-page report contains 36 figures and 11 tables.

Findings from this year’s Supply Report include:

Report Offers INDA Members Key Metrics to Assist in Strategic Planning and Investments

INDA, the Association of the Nonwovens Fabrics Industry, announces publication of the ninth edition of the annual North American Nonwovens Supply Report for its members.

Based on extensive research, producer surveys and interviews with industry leaders, the report provides an overall view of North American supply, including the key metrics of capacity, production and operating rates, in addition to regional trade, through the year 2021. The 75-page report contains 36 figures and 11 tables.

Findings from this year’s Supply Report include:

  • North American capacity continues to increase with investments being made across all the processes and for a variety of end-uses. Production output exceeded that of new capacity, resulting in the industry’s nameplate capacity utilization increasing year-over-year, for the fourth consecutive year.
     
  • In 2021, capacity of nonwovens in North America reached 5.540 million tonnes, an increase from the previous year of 1.8% (net growth of 98,300 tonnes) and an improvement over the previous year’s pandemic-impacted growth rate of 0.5%.
     
  • The industry was able to quickly react to the demand for electrostatically charged fine-fiber meltblown used in the manufacture of respirators and pleated face masks. Twenty-two meltblown lines were added in 2020, resulting in 7.2% year-over-year growth rate for meltblown. In 2021, another 12 lines were added, resulting in 8.5% annual growth over 2020.
     
  • North American imports, in tonnage, increased 1.6% in 2021 as exports decreased 6.0%. Imports were led by China accounting for 39% of the imports into North America followed by India (14%) and Germany (9%). Even with the significant shifts in North American trade dynamics, nonwovens tend to stay where they are produced, with the net trade balance (imports less exports, 422,100 tonnes) accounting for less than ten percent of the region’s capacity

The report—and the quarterly INDA Market Pulse and monthly Price Trends Summary—are provided to the nearly 400 INDA member companies and associates as part of their membership. The data gathered for this annual report serves as the foundation for the both the biannual Global Nonwoven Market Report published in September of 2021 and the biannual North American Nonwovens Industry Outlook, which will be updated and published this fall.

More information:
nonwovens INDA
Source:

INDA

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Reifenhäuser Enka Tecnica mit High-End-Komponenten auf der INDEX (c) Reifenhäuser
19.10.2021

Reifenhäuser Enka Tecnica exhibits high-end components at INDEX

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

With its refresh service for refurbishing used components, Enka Tecnica not only offers a cost-efficient alternative to new parts, but also extremely fast delivery times, a factor that is often decisive to maintain daily production targets. Visitors to Geneva will be able to see the quality of refresh components displayed at the booth - a meltblown and a spunbond spinneret, half of which has been refurbished. They will be able to see the condition of the capillary holes before and after the refresh through a microscope.

Another trade show highlight includes jet strips for hydroentangling nonwovens. Depending on the application, they are offered in Smart, Advanced, and Premium versions and have a special unique selling point – the strips are fully hardened, whereas competitor products usually only have a hardened surface. This quality advantage results in significantly longer service lives, which is why they are also known on the market as "The World's Hardest Strips”.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

18.10.2021

SABIC presents new Portfolio for Nonwovens at INDEX

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

During INDEX, SABIC will exhibit a wide range of PP polymers targeted at these needs. Highlights on display will include dedicated PP and PE grades for lightweight nonwoven fabrics using the latest spunbond and meltblown processes, and a new ultra-high melt flow PP product engineered for meltblown fibers in nonwoven fabrics. The nonwoven focus will be complemented by industry proven polyolefins for cast and blown film applications in hygiene webs and laminates, providing desirable back and top sheet properties such as water tightness, breathability and elasticity.

In addition, SABIC will also present ISCC Plus certified fiber and film polymers based on circular and renewable PP and PE polymer technology as part of the company’s TRUCIRCLE portfolio for advancing the transformation of the plastics industry from a linear to a truly circular economy. Examples of this comprehensive initiative include collaborations with various market leaders in the field. Together with Fibertex Personal Care, one of the world’s largest manufacturers of spunbond nonwovens for the hygiene industry, SABIC is creating a range of high-purity nonwovens for the hygiene market using ISCC PLUS certified circular PP polymer derived from post-consumer plastic waste. In another project, Fraunhofer Institute, SABIC and Procter & Gamble (P&G) joined forces to develop and demonstrate the feasibility of an advanced close-loop recycling process for used nonwoven facemasks.

Source:

SABIC / Marketing Solutions NV

18.10.2021

RadiciGroup at INDEX with new nonwovens

RadiciGroup's nonwoven innovations are on display at the INDEX trade fair, to be held from 19 to 22 October 2021 in Geneva, Switzerland. Active in the spunbond production business for more than 30 years with the dylar® product line, the Group is introducing Respunsible®, a reduced environmental impact spunbond made from recycled polypropylene, and radimelt™, the brand name for the Group’s line of meltblown nonwovens and composite materials (e.g., SMS).

Respunsible® is a spunbond made from recycled polypropylene, a material appreciated for its chemical properties and its versatility. Its high technical performance makes it suitable for any application, even the most demanding ones in terms of resistance and duration.

Radimelt™ is the brand name identifying the Group’s meltblown nonwovens, materials used for the manufacture of protective face masks and other personal protective equipment (PPE). This nonwoven fabric has excellent filtration performance even for microscopic particles, such as viruses, and ensures breathability and protection.

RadiciGroup's nonwoven innovations are on display at the INDEX trade fair, to be held from 19 to 22 October 2021 in Geneva, Switzerland. Active in the spunbond production business for more than 30 years with the dylar® product line, the Group is introducing Respunsible®, a reduced environmental impact spunbond made from recycled polypropylene, and radimelt™, the brand name for the Group’s line of meltblown nonwovens and composite materials (e.g., SMS).

Respunsible® is a spunbond made from recycled polypropylene, a material appreciated for its chemical properties and its versatility. Its high technical performance makes it suitable for any application, even the most demanding ones in terms of resistance and duration.

Radimelt™ is the brand name identifying the Group’s meltblown nonwovens, materials used for the manufacture of protective face masks and other personal protective equipment (PPE). This nonwoven fabric has excellent filtration performance even for microscopic particles, such as viruses, and ensures breathability and protection.

(c) Reifenhäuser
18.10.2021

Reifenhäuser Reicofil exhibits sustainable nonwovens at INDEX

Reifenhäuser Reicofil will exhibit at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. Under the slogan "Living Nonwovens", the nonwoven line specialist will showcase solutions for the production of sustainable nonwovens for a wide range of applications.

Sustainable nonwoven production starts with the amount of material used - the less raw material needed, the better. The "Reicofil 5x" line series is specialized in this application and achieves fabric weights of 8 gsm (grams per square meter) or even less through efficient downgauging, even on 1000 m/min Composite lines containing 3 Spunbond beams.

In addition, Reicofil customers can reduce the use of fossil raw materials on request by processing biobased raw materials as an ecological alternative - for example for diapers. The topsheet material, made of bulky, soft, and industrially compostable high-loft nonwovens, meets maximum hygiene requirements at the same time.

Reifenhäuser Reicofil will exhibit at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. Under the slogan "Living Nonwovens", the nonwoven line specialist will showcase solutions for the production of sustainable nonwovens for a wide range of applications.

Sustainable nonwoven production starts with the amount of material used - the less raw material needed, the better. The "Reicofil 5x" line series is specialized in this application and achieves fabric weights of 8 gsm (grams per square meter) or even less through efficient downgauging, even on 1000 m/min Composite lines containing 3 Spunbond beams.

In addition, Reicofil customers can reduce the use of fossil raw materials on request by processing biobased raw materials as an ecological alternative - for example for diapers. The topsheet material, made of bulky, soft, and industrially compostable high-loft nonwovens, meets maximum hygiene requirements at the same time.

For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste. This is how Reicofil shows ways to combine sustainability and high-performance nonwovens.

In the medical sector, the line manufacturer will also be exhibiting its leading solutions for high-barrier medical protective clothing. In addition, meltblown nonwovens for face masks - still in great demand in many regions due to Covid - provide reliable safety and are helping to combat the pandemic worldwide. Reicofil technology therefore guarantees maximum safety, with filtration efficiencies of up to 99% (N99 / FFP3 standard), minimum quality fluctuations, and extremely high line availability at the same time.

With the current RF5 machine generation, Reicofil also sets benchmarks in terms of quality, performance, availability, efficiency, and machine intelligence - for challenging applications in hygiene, medical, and industrial sectors.

More information:
INDEX Reifenhäuser
Source:

Reifenhäuser GmbH & Co. KG

13.10.2021

RadiciGroup at INDEX with sustainable spunbond

RadiciGroup presents their vision on sustainability at INDEX on the 20th of October at 4pm.

RadiciGroup has been manufacturing polypropylene spunbond for almost 30 years with its well-known brand dylar®. Today the Group adds to its offer Respunsible®, a new sustainable spunbond obtained from recycled polypropylene and RadimeltTM, the brand for meltblown nonwovens and composite nonwovens.

RadiciGroup presents their vision on sustainability at INDEX on the 20th of October at 4pm.

RadiciGroup has been manufacturing polypropylene spunbond for almost 30 years with its well-known brand dylar®. Today the Group adds to its offer Respunsible®, a new sustainable spunbond obtained from recycled polypropylene and RadimeltTM, the brand for meltblown nonwovens and composite nonwovens.

Source:

RadiciGroup

(c) Autefa
25.08.2021

Swiss Textile Machinery: Top Technology for Nonwovens

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

The automotive industry is the second big growth area, with many new applications being pioneered. The trend to electric and hybrid vehicles has helped this, as nonwovens reinforced with carbon fibres are widely used as battery housings.

Swiss nonwovens competence
Innovative applications across all sectors have driven the rapid evolution of sophisticated nonwovens machinery. Today’s trends demand higher productivity, sustainability and Industry 4.0 compatibility – demonstrated by the full equipment portfolio of Swiss Textile Machinery member Autefa Solutions. With V-Jet Futura, the company recently sealed the link in its product range between web forming and drying technology. This latest Hydroentanglement Machine, together with the SQ-V Square Drum Dryer, embodies advanced technology combined with significant reductions in energy consumption compared to other process solutions.

A vital contribution to nonwovens production is offered by Rieter subsidiary Graf, a leading supplier of clothing and combs for carding and combing processes in spinning and nonwovens. Graf's Hipro card clothings – suitable for any man-made fibres in the nonwovens sector – are focussing on higher productivity. Their superior performance delivers up to 10% higher throughput and greater carding efficiency compared to conventional clothings. These reliable card clothing elements also ensure a consistently reproducible high web quality, as well as 20% fewer failures in the web, thanks to the precise fibre transfer to and from the cylinder.

Another constant trend in nonwovens today is the drive for better quality. Manufacturers want to take charge of contamination levels in their processes, as well as eradicating defects which may arise during production. Uster Technologies, a leading provider of quality management solutions from fibre to fabric, offers a combined solution to achieve both these required quality standards. At the fibre preparation stage, Uster Jossi Vision Shield N ensures the best possible initial inspection and removal of contamination. Then, at the end of the production sequence, Uster EVS Fabriq Vision N handles automated detection and marking of all the main defects caused during production. This combined solution avoids material waste and takes full advantage of the potential for process optimization.

Source:

Swiss Textile Machinery Association

(c) Fibre Extrusion Technology
04.08.2021

New FET meltspinning system upgrade for NIRI

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

NIRI supports global manufacturing companies to identify new opportunities for meltblown nonwovens, develop their next generation of products and accelerate their commercialisation activities. NIRI’s new upgraded laboratory and pilot system from FET can process a wide range of polymer types, including chemically recycled polymers, bio-polymers and many difficult-to-process materials.

Source:

Project Marketing for Fibre Extrusion Technology

Avgol invests in new capabilities at Russian facility (c) Avgol
28.06.2021

Avgol invests in new capabilities at Russian facility

  • New high-capacity line enables diversification to meet growing demand

Avgol, a global leader in the manufacture of high performance non-woven fabric solutions, has announced it is investing in a new high-speed, high-capacity flexible multiple beam production line at its facility in Uzlovaya, Russia.

“The addition of this new line enables us to have greater production capacity for growing regional markets and support the release of new Avgol technologies,” said Tommi Bjornman, CEO of Avgol.
“Serving the growing baby diaper, adult incontinence and feminine hygiene markets along with satisfying sustained demand for meltblown filtration and medical materials, this investment enables Avgol to deliver an improved degree of service across the entire area while consolidating and strengthening our existing position,” he said.

  • New high-capacity line enables diversification to meet growing demand

Avgol, a global leader in the manufacture of high performance non-woven fabric solutions, has announced it is investing in a new high-speed, high-capacity flexible multiple beam production line at its facility in Uzlovaya, Russia.

“The addition of this new line enables us to have greater production capacity for growing regional markets and support the release of new Avgol technologies,” said Tommi Bjornman, CEO of Avgol.
“Serving the growing baby diaper, adult incontinence and feminine hygiene markets along with satisfying sustained demand for meltblown filtration and medical materials, this investment enables Avgol to deliver an improved degree of service across the entire area while consolidating and strengthening our existing position,” he said.

Avgol, an Indorama Ventures Limited company, leads the global hygiene market with the most comprehensive range of ultra-lightweight spun-melt nonwoven fabrics. This new line at the company’s Uzlovaya facility, in the Tula Oblast region of Russia, will see Avgol investing in new Reicofil 5 (RF5) technology. The third line for this location will include biocomponent and corresponding high-loft capabilities thus producing materials for applications that meet the needs of upper tier products for Hygiene customers.

As part of the investment, Avgol is including new capacity for meltblown production with a dedicated line, ensuring a continuous supply of this critical material for the region. One other aspect of the investment, and a new inhouse capability for Avgol, includes the addition of cutting-edge lamination capabilities. These capabilities will allow Avgol to offer enhanced performance products into the existing markets the company serves, as well as allowing the company to explore new opportunities in other markets. “The RF5 line, meltblown line and lamination capabilities will provide us a powerful set of platforms as a base from which to provide high-value products for our customers,” said Mr. Bjornman.  “It will enable us to further diversify the Avgol innovation portfolio while remaining true to our roots.”

Mr. Bjornman further commented that the investment will also significantly support further sustainable product development in Avgol, under its innovative FIT™ (Forward Innovative Thinking) strategy. “Avgol is committed to the future of nonwoven fabrics with a particular focus on bringing polyolefins forward as viable resins in single use articles,” he said. “We are excited to bring new assets, new capabilities, and new technologies that will challenge customer expectations of the nonwoven fabric industry.” This investment will move the Russian production facility to the second largest site for Avgol (the largest facility remains the Mocksville site in North Carolina, USA).

Source:

PHD Marketing Ltd