From the Sector

Reset
38 results
© Freudenberg Performance Materials
19.09.2022

Freudenberg hosts German National Hydrogen Council meeting

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

The German National Hydrogen Council was appointed by the German government and acts as an independent, non-partisan advisory board. The council board currently consists of 25 high-ranking experts in the fields of economy, science and civil society. The objective is to assist and advise the State Secretaries’ Committee on Hydrogen in the further development and implementation of Germany’s National Hydrogen Strategy. Council meetings are hosted by one of the board members to enable the council to deepen its knowledge of the relevant technologies, value chain roles and challenges. Dr. Silke Wagener is a member of the council board, and represents the Freudenberg technology group, giving input on suppliers’ know-how as well as contributing her decades-long expertise in technological solutions for the hydrogen industry.

During a tour of the factory organized for the council board members, Freudenberg Performance Materials explained the development and production of performance-critical gas diffusion layers manufactured from carbon fiber-based nonwovens for fuel cells and porous transport layers for electrolyzers. The tour highlighted the potential for improvements from a supplier’s perspective, such as the need for very timely exchange and collaboration along the value chain. Functioning, unbroken and scalable value chains, in parallel with the development and scaling of hydrogen infrastructure, are key prerequisites for the hydrogen industry to fulfill its vital role in the transformation to climate neutrality.

Gas diffusion layers are one of the main components at the heart of the fuel cell. Their function is to transport gases and liquids in the cells. They have a significant impact on system performance and costs, and are indispensable for the functioning of fuel cells. The same applies for porous transport layers that are the key component of electrolyzers for the CO2-free production of what is called green hydrogen.

Fuel cells in combination with green hydrogen are an important technology for CO2-free mobility, in particular with reference to buses, heavy-duty trucks and trains. Other uses include stationary applications such as stationary power generation or heat generation in buildings or industry.
Apart from mobility, green hydrogen also plays a key role in climate-neutral energy supplies in the industrial sector, particularly in the chemical and steel industries.

Source:

Freudenberg Performance Materials

Photo: Reifenhäuser
15.09.2022

PFNonwovens invests in Reicofil RF5 technology in South Africa

RF5 SMMS 3200 nonwovens line is scheduled to be commissioned in the fourth quarter of 2022, and will be the first Reicofil 5 (RF5) line operating in Africa.

PFNonwovens is one of the most innovative nonwoven companies in the world, and continues to grow its footprint in the US, Europe and Africa. PFN wants to set a new benchmark of high-quality and innovative products for the Southern African markets with this purchase.

RF5 SMMS 3200 nonwovens line is scheduled to be commissioned in the fourth quarter of 2022, and will be the first Reicofil 5 (RF5) line operating in Africa.

PFNonwovens is one of the most innovative nonwoven companies in the world, and continues to grow its footprint in the US, Europe and Africa. PFN wants to set a new benchmark of high-quality and innovative products for the Southern African markets with this purchase.

Markus Mueller, Sales Director of Reifenhäuser Reicofil and Key Account Manager for PFNonwovens, adds: “Since 2018, Reicofil has been delivering RF5 lines to support the global hygiene industry across four continents. The hygiene industry values the consistent product quality provided by RF5 and the key product performance properties it delivers at lower basis weights helping to drive industry sustainability goals. With an energy requirement of 1-1.2 kilowatt hours per kilogram produced, Reicofil 5 manages the conversion from raw material to nonwoven more efficiently than any other technology on the market. We are very pleased that after many years of partnership cooperation with PFNonwovens, we are now able to establish this technology at their South Africa location and look forward to our further collaboration to serve the hygiene and medical market in the whole region with top quality products.”

Source:

Reifenhäuser

(c) PURE LOOP
07.09.2022

PURE LOOP: High-strength synthetic nonwoven made with a recycled content of 10 percent

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

"The demands on us were high," recalls Patrick Wiesinger, project manager at PURE LOOP. "The PP nonwoven is highly tear resistant, which means its a very challenging recycling process. Our ISEC evo machine conserves the quality of the production waste really well during recycling, so we were able to achieve the specified increase in quality for the recyclates."

Another advantage of PURE LOOP technology is the wide range of shapes in which the production scrap can be delivered for processing. "Our ifeed technology with double feed ram system and singleshaft shredder offers the ideal conditions for direct processing of these large rolls - and without the need for prior preparation of the input material by employees before the material is fed into the recycling process", emphasizes Patrick Wiesinger. With the ISEC evo recycling machine TenCate can now manufacture its high-strength PP nonwoven product with a recyclate content of up to 10 percent.

Source:

PURE LOOP, EREMA Group GmbH

Foto: Freudenberg Performance Materials
11.08.2022

Freudenberg Friction Inserts at WindEnergy Hamburg 2022

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

FFI help to improve the reliability of connections and thus of the entire wind turbine. Furthermore, they eliminate slipping and prevent fretting of connections.

Other examples of applications for FFI are highly loaded flange connections between the rotor shaft and gearbox, connections between the main bearing and the machine carrier housing, the gearbox to generator, or at the pitch gear or ring gear. They increase the friction co-efficient between two components.

Source:

Freudenberg Performance Materials

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

(c) Trützschler Nonwovens
20.06.2022

Trützschler Nonwovens presents solutions for needle-punched nonwovens

Trützschler Nonwovens & Man-Made Fibers GmbH started a cooperation with the Italian textile machinery manufacturer Texnology S.r.l. in the field of needle-punching technology. With immediate effect, the companies will offer complete production lines for needle-punched nonwovens under the name of T-SUPREMA.

Web bonding with steel needles represent the largest production process in the drylaid nonwovens segment. The areas of application are predominantly of a technical nature, with the largest applications being durable geotextiles, automotive textiles and filter media. The high adaptability of the needling and finishing processes as well as the broad material base result in a large number of different end products. Needle-punching is suitable for a wide range of man-made and natural fibers including mineral and high-performance fibers.  

Trützschler Nonwovens contributes its many years of experience in fiber preparation and web forming to the cooperation. Texnology is mainly responsible for the needle-punching process. Joint projects can thus build on a broad application expertise.

Trützschler Nonwovens & Man-Made Fibers GmbH started a cooperation with the Italian textile machinery manufacturer Texnology S.r.l. in the field of needle-punching technology. With immediate effect, the companies will offer complete production lines for needle-punched nonwovens under the name of T-SUPREMA.

Web bonding with steel needles represent the largest production process in the drylaid nonwovens segment. The areas of application are predominantly of a technical nature, with the largest applications being durable geotextiles, automotive textiles and filter media. The high adaptability of the needling and finishing processes as well as the broad material base result in a large number of different end products. Needle-punching is suitable for a wide range of man-made and natural fibers including mineral and high-performance fibers.  

Trützschler Nonwovens contributes its many years of experience in fiber preparation and web forming to the cooperation. Texnology is mainly responsible for the needle-punching process. Joint projects can thus build on a broad application expertise.

A first joint project has already been successfully completed, implemented and put into operation.

Source:

Trützschler Nonwovens

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

(c) Paul Hartmann AG
17.03.2022

BVMed: Sinkende Erstattungspreisen und steigende Herstellerkosten bei aufsaugenden Inkontinenzprodukte

Die im Bundesverband Medizintechnologie (BVMed) organisierten Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung weisen auf den zunehmenden Spagat zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen hin. „Durch die Entwicklungen der Rohstoff-, Transport- und Energiepreise steigt der Preisdruck auf die Hersteller enorm. Auf der anderen Seite sinken die Pauschalen in den Hilfsmittel-Verträgen mit den Krankenkassen weiter. Diese Schere muss endlich wieder geschlossen werden, um die Versorgung der Patient:innen mit diesen Hilfsmitteln sicherzustellen“, so BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung.

Die im Bundesverband Medizintechnologie (BVMed) organisierten Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung weisen auf den zunehmenden Spagat zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen hin. „Durch die Entwicklungen der Rohstoff-, Transport- und Energiepreise steigt der Preisdruck auf die Hersteller enorm. Auf der anderen Seite sinken die Pauschalen in den Hilfsmittel-Verträgen mit den Krankenkassen weiter. Diese Schere muss endlich wieder geschlossen werden, um die Versorgung der Patient:innen mit diesen Hilfsmitteln sicherzustellen“, so BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung.

Die Expert:innen des BVMed-Fachbereichs Inkontinenzversorgung betonen, dass verschiedene globale Entwicklungen zu starken Veränderungen an den Rohstoffmärkten sowie im Transportwesen führen, die sich ebenfalls auf die Produktion von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung auswirken. Es sei dabei nicht davon auszugehen, dass sich diese Entwicklungen auf ein Vor-COVID-Niveau regulierten. Im Gegenteil: der Ukraine-Krieg sorge für eine Verschlechterung der Gesamtsituation im Energie-, Rohstoff- und Transportbereich.

Zum Hintergrund erläutert der BVMed, dass zur Produktion aufsaugender Inkontinenzprodukte als Rohstoffe hauptsächlich Zellstoff (Fluff), Superabsorbent Polymere (Superabsorber), Polyethylene (Folien) und Polyproylene (Vliesstoffe) verwendet werden. Bei Zellstoffen gab es nach dem Risi-Index im dritten Quartal 2021 eine Kostensteigerung von 40 Prozent gegenüber dem Vorjahreszeitraum. Bei Polyproylenen (PP Europe Index) lag die Kostensteigerung bei 60 Prozent, bei Superabsorbern bei 67 Prozent und bei Polyethylenen (LDPE EU Index) sogar bei 80 Prozent. Ursächlich hierfür sind vor allem nicht behebbare Kapazitätsprobleme. Es bestehen kaum Möglichkeiten zusätzlicher Kapazitäten für diese Rohstoffe, was zu einer unmittelbaren Verknappung und zu weiteren Preissteigerungen führt.

Die Energiepreise verzeichneten im Januar 2022 eine Steigerung von durchschnittlich 67 Prozent gegenüber dem Vorjahresniveau. Besonders prägnant ist dabei die Veränderungsrate von Erdgas: Hier ist gegenüber dem gleichen Vorjahresmonat eine Kostensteigerung von 119 Prozent zu verzeichnen. Eine maßgebliche Entspannung der Energiekosten ist laut Einschätzung von Expert:innen nicht absehbar.

Die Veränderungen im Rohstoffmarkt beeinträchtigen ebenfalls die Produktion von Primär- und Sekundärverpackungen. So sind enorme Preisanstiege zum Vorjahreszeitraum bei Sekundärrohstoffen aus Papier und Pappe (plus 73 Prozent) sowie bei Verpackungsmitteln aus Holz (plus 66 Prozent) zu verzeichnen. Wellpapier und Wellpappe erfuhren gegenüber dem Vorjahresniveau eine Preissteigerung von 42 Prozent, so die BVMed-Expert:innen.

Bedrohlich bleiben auch die Entwicklungen im Transportwesen. Weltweit besteht ein immenser Mangel an Containertransporten. Die hierdurch erhöhte Nachfrage führt zu steigenden Preisen bei den Container- und Frachtkosten. Die durch die globale Nachfrage forcierte enorme Verzögerung von Lieferungen wirkt sich ebenfalls auf das Preisgefüge aus. Auch die Überlastung zentraler Häfen in China, Nordeuropa, Singapur, Sydney und an der US-Westküste führt zu Verzögerungen und Preissteigerungen. Nach dem FBX-Index sind die weltweiten Frachtkosten im Vergleichszeitraum 2020/2021 insgesamt um 400 Prozent gestiegen. Preiserhöhungen im Transport ergeben sich außerdem aus den Entwicklungen im Bereich Energie, insbesondere Erdgas, sowie Fachpersonal.

More information:
Vliesstoffe Medizinprodukte BVMed
Source:

BVMed | Bundesverband Medizintechnologie e.V.

International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line. © ANDRITZ
ANDRITZ crosslapper PRO 25-90
02.03.2022

ANDRITZ- a new batt forming line for Romatex

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

This will be the third line supplied by ANDRITZ to Romatex in four years. Helmut Höck, General Manager Operations at Romatex, says: “We bought our first line from ANDRITZ in 2017, then another one in 2019. We have been very satisfied with the close collaboration between our companies, the flexibility and reliability of the machines, as well as the excellent service from ANDRITZ over all these years. The experience has been uncomplicated. This has given us the confidence to consider ANDRITZ for a further investment.”

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, including batt forming equipment for the stitchbonding processes used to make Maliwatt, Malivlies and Multiknit. This segment addresses a variety of applications, including automotive, household, bedding, footwear, wipes, and many others.

Romatex is the leader in Maliwatt stitchbonding in Africa. Its facility is located in Cape Town. One of the company’s key strengths is its product diversification. Today, the company offers a complete range of bed linen, duvets, pillows, and stitchbonded products.

More information:
Andritz nonwovens
Source:

ANDRITZ-GRUPPE

Photo: ANDRITZ
25.02.2022

ANDRITZ at IDEA 2022

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

More information:
Andritz IDEA nonwovens spunlace
Source:

ANDRITZ AG

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

Trützschler Nonwovens auf der IDEA (c) Trützschler Nonwovens & Man-Made Fibers GmbH
A Carded/Pulp (CP) line for biodegradable composite nonwovens from pulp and viscose fibers
21.02.2022

Trützschler Nonwovens at IDEA

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

Digital solutions optimize the production floor
In order to ensure lasting quality, Trützschler Nonwovens presents a modular, digital work environment that systematizes, digitizes and simplifies typical work processes. With the help of Industry 4.0 technologies, line, process and quality data relevant to a production lot can be stored, aggregated, visualized and analyzed with regard to process improvements.

Trützschler USA
With its headquarters in Charlotte, North Carolina, and more than 100 employees, Trützschler USA is the first point of contact for all matters relating to American nonwovens producers. The company is able to equip and convert machines according to customer specifications (certified UL508A panel shop), carry out factory acceptance tests and a wide range of repairs in Charlotte.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

Photo: ANDRITZ
13.01.2022

ANDRITZ to supply a spunlace line to Biosphere, Ukraine

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

Andriy Zdesenko, founder and CEO of Biosphere Corporation, says: “Our goal is to carry on creating innovative and premium-quality products. When ANDRITZ came up with a tailor-made offer combining its cutting-edge spunlace technology with full flexibility for our future installation, we knew they were the ideal partner to support us in our business development.”

In 2019, ANDRITZ Diatec delivered a baby diaper converting line to Biosphere. With this additional order, ANDRITZ is demonstrating its strong global position as a supplier of state-of-the-art and tailor-made sustainable nonwoven solutions.

Founded in 1997, Biosphere Corporation has become the market leader in the production and distribution of household and hygiene products in the Ukraine and the CIS and a key converter player in Eastern Europe and Central Asia. The company is expanding rapidly on the international market, including Africa.

Source:

ANDRITZ AG

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

(c) ANDRITZ AG
ANDRITZ neXline Spunlace eXcelle Line
09.11.2021

ANDRITZ to supply a high-speed spunlace line to Welspun, India

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

Welspun is the largest global exporter of home textiles. Innovation and quality lie at the heart of the company’s success, which already has nonwoven production lines in operation, including needlepunch and spunlace equipment. With its new plant in Telangana, Welspun will significantly increase its existing spunlace capacity and also maintain a broad range of applications as the final products are used in hygiene, home care and industrial cleaning. The new, advanced facility is a 100,000 sqm greenfield development that is part of a larger 1,500,000 sqm industrial complex also accommodating the Welspun floorings facility.

Source:

ANDRITZ AG

05.11.2021

GKD-Lösungen für die Vliesstoffindustrie auf der INDEX

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Besondere Topografie und kurze Lieferzeiten
Überaus positiv war die Resonanz auf das neue GKD-Prozessbandgewebe CONDUCTIVE 2215 – eine Kreuzköperbindung aus speziellen Polyester-Filamenten für die Airlay- und Meltblown Vliesformierung. Für die sichere Ableitung der in Formierprozessen unvermeidlichen elektrostatischen Aufladung sorgen karbonbeschichtete Filamente. Das innovative Zusammenspiel von Materialwahl, Filamentdurchmesser, Bindungstechnologie und Luftdurchlässigkeit verleiht dem neuen Formiergewebe von GKD eine besondere Topografie. Sie gewährleistet eine präzise, homogene Vliesablage bei zugleich guter Absaugung und minimiertem Risiko von Faserverhakungen oder -verlust. Das qualifiziert diesen neuen Gewebetyp insbesondere für die Verarbeitung kurzfaseriger, gebleichter Baumwolle in der Airlay-Formierung. Aus Anwendersicht sprechen für dieses Produkt überdies die guten Lieferzeiten dank durchgängiger Produktion bei GKD in Deutschland. Dadurch entfallen die sonst üblichen Unwägbarkeiten und langen Lieferzeiten anderer Anbieter mit Lieferketten in Fernost oder Übersee und anschließender Konfektionierung in Europa.

Antihaftbeschichtete Glashybrid-Leichtgewichte
Ein zweiter Magnet am GKD-Messestand waren die antihaftbeschichteten Glashybrid-Gewebebänder für Thermobonding-Prozesse. Die Glashybrid-Gewebebänder von GKD sind bereits seit Jahren zur thermischen Verfestigung von hoch voluminösen oder stark verdichteten Produkten in Doppelbandöfen erfolgreich etabliert. Durch ihre einlagige Gewebekonstruktion aus Edelstahldrähten in Schussrichtung und Kettseilen aus Glasfaserlitzen sind sie energieeffiziente Leichtgewichte und damit besonders wirtschaftlich in der Anwendung. Unterstrichen wird diese Wirtschaftlichkeit durch eine deutlich höhere Fertigungsgeschwindigkeit, mehrjährige Laufzeiten sowie minimierte Reinigungsintervalle. Die vollständige PFA-Beschichtung von Drähten, Litzen und Kreuzungspunkten qualifiziert den Bandtyp insbesondere für stark klebende Produkte oder solche mit großen Schrumpfkräften. Mit der nochmals verstärkten Gewebeauslegung – wahlweise magnetisch oder nichtmagnetisch – wurden die ohnehin schon guten Eigenschaften wie Querstabilität, Spurtreue und Standzeit noch weiter verbessert.

Produkte für Trocknung und Filtration
Im Rahmen der INDEX gefragte Problemlöser waren auch die nahtlosen Spiralbänder aus GKD-Fertigung. In der Vliesproduktion gewährleisten die in Luftdurchlässigkeit, Spurtreue und Formstabilität kunden- und anwendungsspezifisch ausgelegten Bänder in PPS-Ausführung produktschonende Trocknungsprozesse bei bis zu 180 Grad Celsius. Abgerundet wurde das Ausstellungsprogramm von GKD in Genf durch Filtermedien für Zentralfilter, Spinnbalken und Anblassiebe aus Metallgewebe für die Polymerfiltration.

Source:

GKD / impetus.PR