From the Sector

Reset
25 results
Foto: HSNR Stephanie Thoma zeigt den Gästen Dr. Ida Nuramdhani (von links), Tina Martina und Dr. Mohamad Widodo das Konfektionslabor am Fachbereich Textil- und Bekleidungstechnik. Von der Hochschule mit dabei sind Joel Schüßler, Dr. Katrin Waletzke und Prof. Dr. Monika Eigenstetter (rechts).
27.01.2023

HS Niederrhein: Neuer Double Degree-Bachelorstudiengang Smart Textiles/Textile Electronics

Die Hochschule Niederrhein (HSNR) verstärkt ihr internationales Engagement. Dazu plant sie die Einführung eines Double Degree-Bachelorstudiengang zum Thema Smart Textiles/Textile Electronics ab 2025/2026. Neben der University of Borås in Schweden, die das Studienangebot ebenfalls einführen will, möchten die Hasselt-University in Belgien und das industrienahe Politeknik STTT Bandung in Indonesien einzelne Module in ihrem Lehrplan übernehmen.

An den Inhalten arbeiten die Projektpartner im Rahmen des Projektes „Edu4SmartTex“, das mit knapp einer Million Euro vom Deutschen Akademischen Austauschdienst (DAAD) gefördert wird.

Tina Martina, Direktorin der Politeknik, Dr. Ida Nuramdhani und ihr Kollege Dr. Mohamad Widodo sind aktuell in Krefeld und Mönchengladbach, um sich über die Umsetzung der Lehre an der HSNR zu informieren und in einem Workshop das gemeinsame Lehrmodul „Sustainability and Circular Economy“ (Nachhaltigkeit und Kreislaufwirtschaft von Smart Textiles) zu erarbeiten. Hier werden Lehr-Inhalte und Ziele diskutiert. Das Modul soll eines von insgesamt sieben des geplanten Studiengangs sein.

Die Hochschule Niederrhein (HSNR) verstärkt ihr internationales Engagement. Dazu plant sie die Einführung eines Double Degree-Bachelorstudiengang zum Thema Smart Textiles/Textile Electronics ab 2025/2026. Neben der University of Borås in Schweden, die das Studienangebot ebenfalls einführen will, möchten die Hasselt-University in Belgien und das industrienahe Politeknik STTT Bandung in Indonesien einzelne Module in ihrem Lehrplan übernehmen.

An den Inhalten arbeiten die Projektpartner im Rahmen des Projektes „Edu4SmartTex“, das mit knapp einer Million Euro vom Deutschen Akademischen Austauschdienst (DAAD) gefördert wird.

Tina Martina, Direktorin der Politeknik, Dr. Ida Nuramdhani und ihr Kollege Dr. Mohamad Widodo sind aktuell in Krefeld und Mönchengladbach, um sich über die Umsetzung der Lehre an der HSNR zu informieren und in einem Workshop das gemeinsame Lehrmodul „Sustainability and Circular Economy“ (Nachhaltigkeit und Kreislaufwirtschaft von Smart Textiles) zu erarbeiten. Hier werden Lehr-Inhalte und Ziele diskutiert. Das Modul soll eines von insgesamt sieben des geplanten Studiengangs sein.

Involviert sind neben dem Fachbereich Textil- und Bekleidungstechnik auch die Fachbereiche Elektrotechnik und Informatik, Wirtschaftswissenschaften, Sozialwesen sowie Design, um Synergieeffekte zu nutzen und Kompetenzen zu bündeln.

„Austausche an den Partnerhochschulen sind ein wichtiger Punkt für uns. Zudem werden viele Lehrveranstaltungen digital ablaufen, sodass sich die Studierenden flexibel von überall zuschalten können“, so der wissenschaftliche Mitarbeiter Joel Schüßler, der das von Professorin Anne Schwarz-Pfeiffer (Textil- und Bekleidungstechnik) und Professorin Ekaterina Nannen (Elektrotechnik und Informatik) initiierte Projekt begleitet.

Weitere geplante Module beschäftigen sich unter anderem mit Programmierung und App-Entwicklung, Unternehmensgründung sowie Forschung und Industrie. In diesem Fall soll auch mit einem Praxispartner zusammengearbeitet werden.

13.09.2022

Ionofibres a new track for smart and functional textiles

Electronically conductive fibres are already in use in smart textiles, but in a recently published research article, ionically conductive fibres have proven to be of increasing interest. The so-called ionofibres achieve higher flexibility and durability and match the type of conduction our body uses. In the future, they may be used for such items as textile batteries, textile displays, and textile muscles.

The research project is being carried out by doctoral student Claude Huniade at the University of Borås and is a track within a larger project, Weafing, the goal of which is to develop novel, unprecedented garments for haptic stimulation comprising flexible and wearable textile actuators and sensors.

In Claude Huniade’s project, the goal is to produce conductive yarns without conductive metals.
"My research is about producing electrically conductive textile fibres, and ultimately yarns, by coating non-metals sustainably on commercial yarns. The biggest challenge is in the balance between keeping the textile properties and adding the conductive feature," said Claude Huniade.

Electronically conductive fibres are already in use in smart textiles, but in a recently published research article, ionically conductive fibres have proven to be of increasing interest. The so-called ionofibres achieve higher flexibility and durability and match the type of conduction our body uses. In the future, they may be used for such items as textile batteries, textile displays, and textile muscles.

The research project is being carried out by doctoral student Claude Huniade at the University of Borås and is a track within a larger project, Weafing, the goal of which is to develop novel, unprecedented garments for haptic stimulation comprising flexible and wearable textile actuators and sensors.

In Claude Huniade’s project, the goal is to produce conductive yarns without conductive metals.
"My research is about producing electrically conductive textile fibres, and ultimately yarns, by coating non-metals sustainably on commercial yarns. The biggest challenge is in the balance between keeping the textile properties and adding the conductive feature," said Claude Huniade.

Currenty, the uniqueness of his research leans towards the strategies employed when coating. These strategies expand to the processes and the materials used.

Uses ionic liquid
One of the tracks he investigates is about a new kind of material as textile coating, ionic liquids in combination with commercial textile fibres. Just like salt water, they conduct electricity but without water. Ionic liquid is a more stable electrolyte than salt water as nothing evaporates.

"The processable aspect is an important requirement since textile manufacturing can be harsh on textile fibres, especially when upscaling their use. The fibres can also be manufactured into woven or knitted without damaging them mechanically while retaining their conductivity. Surprisingly, they were even smoother to process into fabrics than the commercial yarns they are made from," explained Claude Huniade.

Ionofibres could be used as sensors since ionic liquids are sensitive to their environment. For example, humidity change can be sensed by the ionofibers, but also any stretch or pressure they are subjected to.

"Ionofibres could truly shine when they are combined with other materials or devices that require electrolytes. Ionofibres enable certain phenomena currently limited to happen in liquids to be feasible in air in a lightweight fashion. The applications are multiple and unique, for example for textile batteries, textile displays or textile muscles," said Claude Huniade.

Needs further research
Yet more research is needed to combine the ionofibres with other functional fibres and to produce the unique textile devices.

How do they stand out compared to common electronically conductive fibres?
"In comparison to electronically conductive fibres, ionofibers are different in how they conduct electricity. They are less conductive, but they bring other properties that electronically conductive fibers often lack. Ionofibres achieve higher flexibility and durability and match the type of conduction that our body uses. They actually match better than electronically conductive fibres with how electricity is present in nature," he concluded.

Source:

University of Borås - The Swedish School of Textiles

13.07.2022

VUB: Hybrid threads based on ultrafine metallic micro-wires

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

Attention was paid to the advanced solutions for smart textiles and e-textiles products esp. electrically conductive hybrid threads based on ultrafine metallic micro-wires. A significant advantage of these threads lies in their full compatibility with standard textile manufacturing processes, and possibility of customization in terms of fineness, electrical conductivity and temperature resistance of individual thread. As an example of one of the applications of conductive threads, different types of woven elastic conductive ribbons were demonstrated, which could be used as bus bars or as textile conductors wherever a variable length of conductive element is required without the negative influence on their electrical resistance during the change the length.

More information:
VUB micro-wires
Source:

VÚB a.s.
 

28.06.2022

C.L.A.S.S. is back with Smart Shop materials at Future Fabrics Expo

The international eco hub C.L.A.S.S. brings its next generation Smart Shop’s offer to the 10th edition of the Future Fabrics Expo from the28th to the 29th of June 2022 in London.

Since 2018, C.L.A.S.S. has been offering the access of the top of its Material hub innovations to small and new generation of designers and brands through its Smart Shop, the online store of smart materials. C.L.A.S.S. intent at FFE is to share the unique values of its design driven, conscious, high-tech materials, in order to start synergies with an audience characterized by the interest in responsible innovations, the main expertise of CEO and founder Giusy Bettoni and her team.

C.L.A.S.S. offers smart solutions – from 1 meter to max 50 meters - for the contemporary wardrobe which include all the different expressions of textile ingredients: natural, transformed, innovative and back in the loop materials, giving everyone the possibility to create design, innovative and yet responsible products in line with their new generation of contemporary values.

The international eco hub C.L.A.S.S. brings its next generation Smart Shop’s offer to the 10th edition of the Future Fabrics Expo from the28th to the 29th of June 2022 in London.

Since 2018, C.L.A.S.S. has been offering the access of the top of its Material hub innovations to small and new generation of designers and brands through its Smart Shop, the online store of smart materials. C.L.A.S.S. intent at FFE is to share the unique values of its design driven, conscious, high-tech materials, in order to start synergies with an audience characterized by the interest in responsible innovations, the main expertise of CEO and founder Giusy Bettoni and her team.

C.L.A.S.S. offers smart solutions – from 1 meter to max 50 meters - for the contemporary wardrobe which include all the different expressions of textile ingredients: natural, transformed, innovative and back in the loop materials, giving everyone the possibility to create design, innovative and yet responsible products in line with their new generation of contemporary values.

Among the conscious, yet technological materials which will be presented at Fabrics for Future there are Bemberg™ by Asahi Kasei, Albini’s organic and scientifically traceable cotton, Re.VerSo™ recycled wools, NewLife™ recycled polyester and Maeba International’s Back in The Loop fabrics.

Source:

C.L.A.S.S.

07.06.2022

ITMC presents date and speakers for its 8th edition

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

  • Omar Cherkaoui, ESITH : how ESITH was able to support the operators of the Moroccan textile sector during the covid-19 crisis
  • Tracy Toulouse, TT : the impact and legacy of our clothing is to identify us as a nation
  • Prof. Raul Fangueiro, University of Minho: fiber-based materials: from nano to macro scale
  • Pierre-Alexandre Fournier, Exoskin: the role of smart textiles in the future of health
  • KyoungOk Kim, Shinshu University: Patternmaking for attractive clothing for mass customization
  • Marie O’Mahony, Consultant, Royal College of Art (RCA): smart materials & systems: has embracing uncertainty become vital to commercialization?
  • Xianyi Zeng, Ensait: intelligent garments for online monitoring of human health and well-being
  • Corinne Farace, Techtera: The collaborative approach: a major stake in meeting the challenges of tomorrow
At STOLL, innovations and optimizations go hand in hand (c) STOLL
The new STOLL customer centre in Reutlingen
11.05.2022

At STOLL, innovations and optimizations go hand in hand

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

Detail optimisations for more overall performance
The innovation packages have the benefits for customers in focus and were tailored to the respective target groups. Every optimization contained therein leads to a decisive improvement in production. All of the solutions developed can be easily integrated into existing STOLL machines.  

Innovation package Number One
Innovation package Number One will be launched on the market in a few weeks' time and is aimed explicitly at knitters who focus on technical textiles. The focus is on convenience and process acceleration. Simple network configuration, expansion of the number of NP values, extended functionality when loading and saving the pattern and also improvement of handling in connection with Production Management from PPS are just some of the features of the package. "The corresponding updates for the machine control system are available to our customers for download free of charge on Customer_Net. In the future, there will also be a cloud-based offering," explains Erhard Vöhringer.

Innovation package Number Two
Still in the pipeline, included in the Number Two innovation package, are improvements for the maintenance area – regarding the use of lubricants and the maintenance intervals (predictive maintenance) – as well as optimizations in terms of sustainability, for example when it comes to reducing consumption of oil and increasing reliability. These solutions will be suitable for all machine types and applications.
The focus here is on improvements in belt take-down, the import and export of data and support for additional storage feeders.
A physical improvement in handling is promised by the new lighting including mirror directly on the machine.
In addition, the development teams are currently working on optimizing various knitting qualities and increasing user-friendliness. So you can already be curious!

Concentrated innovative power
The STOLL development team, with several hundred engineers and technicians in the fields of electronics, software, patterning, and design, never runs out of topics. Questions like "What is the market looking for? What do customers want?  Which changes do the machines have to meet and which ones do the software control and design program have to meet?" are first discussed, evaluated and debated together as a team and then go into the development phase. "Our customers can be absolutely sure that all our innovations are meticulously tested before we go to market with them" emphasizes Erhard Vöhringer. This also applies to the solutions in the innovation packages.

Small solutions, big impact
STOLL flat knitting machines impress with their great application and production potential. Almost 150 years of extensive practical experience in flat knitting technology - the STOLL company was founded in 1873 - is unique in the industry. As a Business Unit of the KARL MAYER Group, STOLL continues to do everything in its power to inspire its customers with innovative strength. Productive, flexible and reliable - simply STOLL! This slogan has not lost any of its meaning today. Quite the contrary: With the new innovation packages, customers benefit not only from the latest high-tech flat knitting machines, but also from an always up-to-date performance upgrade of their existing machine park.
With its innovation packages, STOLL has found a flexible and very fast way directly to the customer. Anyone who wants to know more about this is cordially invited to this year's trade fairs. STOLL looks forward to seeing you at the KARL MAYER Group stand at ITM (Istanbul), Techtextil (Frankfurt), Techtextil India (Mumbai) and ITMA ASIA. (Shanghai).

More information:
Stoll Karl Mayer Gruppe
Source:

KARL MAYER Verwaltungsgesellschaft mbH

05.04.2022

ADD-ITC 2022: Call for Abstracts

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

Further information about the conference program, plenary and keynote speakers as well as the call for abstracts are online availabel.

Source:

Aachen-Dresden-Denkendorf International Textile Conference

03.01.2022

Physical ClusterXchange - Discovering smart materials in Czech Republic

Under the ClusterXchange pilot scheme, the EXTRATEX partnership organised a 5-day exchange in Czech Republic, hosted by CLUTEX (cluster for technical textile).

15 participants visited strategic and innovative companies in the field of smart materials and advances technologies, as well as research centres and the Liberec University.

During the exchange, 92 B2B meetings were organized between local companies and the exchange participants, with 75% of the contacts established leading to follow-ups after the conclusion of the exchange. This collaboration laid the foundation for potential cross-border and cross-sector business collaboration, and participants of the physical exchange improved their competences in the field of smart materials and advanced technologies.

Under the ClusterXchange pilot scheme, the EXTRATEX partnership organised a 5-day exchange in Czech Republic, hosted by CLUTEX (cluster for technical textile).

15 participants visited strategic and innovative companies in the field of smart materials and advances technologies, as well as research centres and the Liberec University.

During the exchange, 92 B2B meetings were organized between local companies and the exchange participants, with 75% of the contacts established leading to follow-ups after the conclusion of the exchange. This collaboration laid the foundation for potential cross-border and cross-sector business collaboration, and participants of the physical exchange improved their competences in the field of smart materials and advanced technologies.

According to a testimony from the company Bipier Srl, their participation in the exchange allowed the establishment of two important working relationships with Bcb Informatica Y Control and Vyskummy Ustav Chemickych (Research Institute for Man-Made Fibers). This cooperation wil allow Bipier Srl to equip their machines with quality temperature control, and to expand the distribution of their products.

More information:
EXTRATEX Smart textiles
Source:

ECCP

JUMBO-Textil: Innovative braiding technology. Innovative products (c) JUMBO-Textil
29.09.2021

JUMBO-Textil: Innovative braiding technology. Innovative products

  • JUMBO-Textil offers elastic high-tech braids – produced on high-tech systems

Developing narrow textile solutions for our customers – quickly, flexibly and precisely – that is our claim. For us and for our technology. Because first-class industrial solutions require first-class technology. Highly automated and digitally controlled. Technology like that found in our variation braider from Herzog – the high-performer among modern braiding machines. JUMBO-Textil is the first narrow textile manufacturer ever to produce elastic hole cords on the special system.

  • JUMBO-Textil offers elastic high-tech braids – produced on high-tech systems

Developing narrow textile solutions for our customers – quickly, flexibly and precisely – that is our claim. For us and for our technology. Because first-class industrial solutions require first-class technology. Highly automated and digitally controlled. Technology like that found in our variation braider from Herzog – the high-performer among modern braiding machines. JUMBO-Textil is the first narrow textile manufacturer ever to produce elastic hole cords on the special system.

High-performance system for extremely stable textile components
The special system combines sophisticated bobbin lace technology with digital control and thus enables the production of highly complex, individually specifiable braided structures. The variation braider's technology ensures an uninterrupted fibre course across all branches. This not only allows individual, idiosyncratic geometries, it also and above all helps with the stability of the components. This is because where other methods create branching points that are susceptible to breakage due to laser cutting, seams or knots, the variation braider simply braids through the branched strands. As the fibre course is not interrupted in braided branches, the resilience of the textiles is significantly increased. And individual braids are created for very different applications.

Bobbin lace technology for highly complex structures
Unlike in classical braiding systems, the impellers of the variation braider are arranged in a square. Up to eight different strands can be braided and interlaced with the textile all-rounder. All bobbins can be programmed separately and thus the bobbin lanes can be combined variably and individually. JUMBO-Textil also produces tubular braids with precisely defined braided openings, triaxial braids and highly complex preforms with the variation braider. The geometries of the narrow textiles range all the way to net structures. For braided cables, we create stable connections in the core-sheath braiding by weaving the core and the protective sheathing, which provides protection especially at the turns: there is no longer any undesired core and sheath slippage.

Individual braid architectures – for automotive, outdoor and more
Complex non-elastic cords from the variation braider have been in operation at JUMBO-Textil for a long time. For hole cords – or bifurcation cords (from the Latin: furca, the fork) – the bobbin points are individually programmed so that the arrangement and length of the branching precisely meet the requirements. It is used, among others, in the automotive sector, in the construction industry and in the outdoor sector to hang or unhang elements without using metal.

Elastic hole cord from the elastics specialist
The elastic hole braids by JUMBO-Textil are new on the market. "The variation braider offers us fantastic possibilities: we can pre-configure what we want to braid and are completely free to do so. The repeat is computer-controlled," explains Holger Vehring, Project Engineer at JUMBO-Textil. "A seamless braided cable harness tubular that organises the cable mess (for automotive), braided hoses with defined openings for conductive elements in smart textiles or rehab applications, as tensioning elements in backpacks or functional clothing – the possible applications are vast. Thanks to this technology, textile – i.e. lighter, quieter and more flexible – components can be used for numerous applications in which metallic materials were previously used due to the fragile branching points."

 

19.07.2021

ISKO to work with the MIT Computer Science & Artificial Intelligence Lab

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

Source:

ISKO / Menabò Group srl

15.06.2021

EURATEX Statement on the EU-US Summit

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

At bilateral level, the EU and US should resume their work on mutual recognition of standards and certification procedures, thus saving considerable costs for our companies while maintaining the highest safety standards. Custom procedures can be simplified on both sides, and joint research, e.g. in smart textiles, should be promoted.

EURATEX welcomes the recent progress in provisionally eliminating additional duties on several American and European products due to the Airbus-Boeing trade dispute. It is a very positive sign that EURATEX would like to highlight in a particularly difficult context for the textile and clothing industry at European, American and even global levels. EURATEX calls on both US and EU institutions to eliminate such duties permanently and build on a common positive agenda for the benefit of EU and US companies and consumers.

EURATEX Director General Dirk Vantyghem commented: "Both the EU and US are developing a new business model for their industry. We should make sure these models can complement and reinforce each other. If not, we risk losing global leadership, not just in terms of market share but also in terms of values and standards."

DITF: SMART TEXTILES erstmals digital (c) DITF
Forschung an Handschuhen mit Drucksensoren für Logistik und Produktion.
31.03.2021

DITF: SMART TEXTILES erstmals digital

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Über den Anwendungsbereich Mobilität hinaus gibt es vor allem in Medizin und Pflege Bedarf an intelligenten Textilien. Sensorische Sohlen in den Schuhen analysieren den Gang und helfen damit Ärzten und Physiotherapeuten, die optimale Therapie auszuwählen - zum Beispiel gegen Rückenschmerzen. Taschentücher, Stofftaschen oder Handschuhe aus speziellen Silbertextilien töten Viren und Bakterien. Eine Innovation, die in der Corona-Pandemie besonders gefragt ist.

Neue Textilelektroden überleben inzwischen sogar viele
Waschgänge und machen smarte Textilien alltagstauglich. Das ist besonders wichtig bei Sportbekleidung, mit der auch Hobbysportler gerne ihr Training tracken, auswerten und optimieren. Neu entwickelte Stoffe haften großflächig am Körper und stellen auf diese Weise sicher, dass Vitalparameter zuverlässig erfasst werden.

Waschbar und leitfähig sind auch Druckknöpfe, die im wahrsten Sinne des Wortes Kontaktierung per Knopfdruck herstellen. In den robusten Knöpfen steckt Elektronik wie Sensoren, Aktoren, LEDs und Schalter.

Das Anwenderforum zeigte auch in diesem Jahr, dass viele Visionen inzwischen realisierbar und marktfähig sind. Herausforderungen sind in Zukunft, nachhaltige Materialien und Prozesse einzusetzen sowie die E-Textiles zu recyceln. Darüber hinaus stellt die Datenflut, die durch die smarten Textilien erzeugt werden kann, hohe Ansprüche an die Sicherheit und die Verarbeitung der Daten.

Das Anwenderforum SMART TEXTILES wird jährlich von den Deutschen Instituten für Textil- und Faserforschung Denkendorf (DITF), dem Forschungskuratorium Textil e. V. in Berlin und dem Textilforschungsinstitut Thüringen Vogtland e. V. (TITV) in Greiz veranstaltet, um den Austausch von Industrie und Wissenschaft in der in der D-A-CH-Region zu fördern.

Das 10. Anwenderforum SMART TEXTILES findet vom 2.-3. März 2022 statt und ist wieder als Präsenzveranstaltung kombiniert mit einer Firmenbesichtigung geplant. Der Veranstaltungsort wird rechtzeitig bekanntgegeben.

Source:

DITF

Doktorandin der Hochschule Niederrhein entwickelte textile Batterie (c) Hochschule Niederrhein
Die textile Batterie hat die Maße 3 cm x 2 cm x 1 mm und eine Kapazität von 140 mAh g-1.
09.03.2021

Doktorandin der Hochschule Niederrhein entwickelte textile Batterie

Mit der Entwicklung einer Batterie aus umweltfreundlichen Textilien hat Sandra Gellner, Doktorandin der Hochschule Niederrhein, eine Auszeichnung auf einer internationalen Konferenz erhalten. Die Doktorandin arbeitet im Bereich Smart Electronic Textiles an der Schnittstelle der Fachbereiche Elektrotechnik und Informatik sowie Textil- und Bekleidungstechnik.

Ihr Vortrag „Textile-Based Battery Using A Biodegradable Gel-Electrolyte“ wurde auf der internationalen Konferenz E-Textiles 2020 („2nd International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles“ mit dem Best Student Presentation Award ausgezeichnet. Die virtuell stattfindende internationale Konferenz gibt verschiedenen Expertinnen und Experten die Möglichkeit, ihre aktuelle Forschung im Bereich intelligenter Textilien vorzustellen.

Mit der Entwicklung einer Batterie aus umweltfreundlichen Textilien hat Sandra Gellner, Doktorandin der Hochschule Niederrhein, eine Auszeichnung auf einer internationalen Konferenz erhalten. Die Doktorandin arbeitet im Bereich Smart Electronic Textiles an der Schnittstelle der Fachbereiche Elektrotechnik und Informatik sowie Textil- und Bekleidungstechnik.

Ihr Vortrag „Textile-Based Battery Using A Biodegradable Gel-Electrolyte“ wurde auf der internationalen Konferenz E-Textiles 2020 („2nd International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles“ mit dem Best Student Presentation Award ausgezeichnet. Die virtuell stattfindende internationale Konferenz gibt verschiedenen Expertinnen und Experten die Möglichkeit, ihre aktuelle Forschung im Bereich intelligenter Textilien vorzustellen.

Sandra Geller, 29 Jahre jung, wohnhaft in Duisburg, hatte zuvor an der Universität Duisburg-Essen NanoWissenschaften studiert. Im Rahmen ihrer Promotion an der Hochschule Niederrhein hat sie eine textil-basierte, ein Millimeter hohe Batterie entwickelt, welche aus umweltfreundlichen Materialien inklusive eines biologisch abbaubaren Gel-Elektrolyten besteht. Durch die textile Architektur ist die Batterie flexibel und kann um 180 Grad in beiden Richtungen gebogen werden, ohne einen Kurzschluss zu erzeugen. Die Wahl der Werkstoffe ermöglicht zudem einen Betrieb ohne zusätzliche Verkapselung.

„Diese Auszeichnung bestätigt die exzellente interdisziplinäre Zusammenarbeit der beiden Fachbereiche und ermutigt uns den Weg gemeinsam weiter zu bestreiten“, sagen die beiden Professorinnen Anne Schwarz-Pfeiffer (Fachbereich Textil- und Bekleidungstechnik) und Ekaterina Nannen (Fachbereich Elektrotechnik und Informatik). Damit sei der Grundstein für eine gemeinsame fachbereichsübergreifende Lehre auf dem Gebiet der smarten Textilien mit dem gemeinsamen Wahlpflichtfach Smart Electronic Textiles gelegt.

Neben Sandra Gellner hielt auch die Doktorandin Ramona Nolden der Hochschule Niederrhein einen Vortrag mit dem Titel „Smart Glove with an Arduino-Controlled Textile Bending Sensor, Textile Data Conductors and Feedback Using LED-FSDs TM and Embroidery Technology“. Sie entwickelte einen intelligenten Handschuh, der aus einem integrierten textilen Biegesensor im Finger, funktionalen Pailletten auf dem Handrücken, einer ansteckbaren Manschette mit einem Mikrocontroller und einer Energiequelle besteht.

Global Success of Technical Textiles will be Reflected in HIGHTEX 2021 (c) HIGHTEX 2021
International Technical Textiles and Nonwoven Fair
28.12.2020

Global Success of Technical Textiles will be Reflected in HIGHTEX 2021

  • The nonwoven and technical textiles industry has become the focus of the whole world during the pandemic process.
  • Most countries carried out works for these sectors with their investments, production and innovations.

During the pandemic process, a new one is added every day to the works for the nonwoven and technical textiles sector, whose importance is increasing in line with the needs. Turkey has become a center of  technical textiles by showing that its accumulation in these field and power.

In the Turkish technical textiles sector, which has an export market of 107 billion dollars worldwide and continues to break its own export record every month, R&D and innovation investments continue without slowing down. Technical textile exports, which increased by 77 percent in last November compared to the same month of the previous year, increased by 55 percent in January - November period and reached 2.5 billion dollars. Thus, technical and smart textiles and production technologies both attracted more attention and gained more importance in line with the needs of the pandemic process.

  • The nonwoven and technical textiles industry has become the focus of the whole world during the pandemic process.
  • Most countries carried out works for these sectors with their investments, production and innovations.

During the pandemic process, a new one is added every day to the works for the nonwoven and technical textiles sector, whose importance is increasing in line with the needs. Turkey has become a center of  technical textiles by showing that its accumulation in these field and power.

In the Turkish technical textiles sector, which has an export market of 107 billion dollars worldwide and continues to break its own export record every month, R&D and innovation investments continue without slowing down. Technical textile exports, which increased by 77 percent in last November compared to the same month of the previous year, increased by 55 percent in January - November period and reached 2.5 billion dollars. Thus, technical and smart textiles and production technologies both attracted more attention and gained more importance in line with the needs of the pandemic process.

HIGHTEX 2021 International Technical Textiles and Nonwoven Fair, which will be held at Tüyap Fair and Congress Center on 22-26 June 2021, will be the exhibition where the latest technologies and products for nonwoven, technical and smart textiles which have become more important during the pandemic period and have become the focus of the whole world. Especially the products and technologies produced for the pandemic will attract more attention at the exhibition. HIGHTEX 2021 Exhibition, which will gather its exhibitors and visitors under one roof, will also allow new collaborations. At the same time, the exhibition, where developing technologies and products are exhibited, will provide a great advantage in terms of the formation of new business ideas.
HIGHTEX 2021, the first and only exhibition in Turkey in its field are expected to sign a new record in terms of number of exhibitors and visitors. You can visit www.hightexfairs.com website for more information about HIGHTEX 2021, which is preparing to attract more attention and host people than ever before.

Programm für Mastervertiefung mit 300.000 Euro gefördert (c) Hochschule Niederrhein
Prof. Dr. Anne Schwarz-Pfeiffer mit einer Studentin.
07.12.2020

Hochschule Niederrhein: Mode und Elektronik vereint

  • Programm für Mastervertiefung mit 300.000 Euro gefördert

Der Megatrend Digitalisierung macht auch vor der Modebranche nicht Halt. Um mit der Entwicklung und dem Anspruch der Branche mithalten zu können entwickelt die Hochschule Niederrhein (HSNR) eine neue, fachübergreifende Vertiefungsrichtung für Masterstudiengänge: Textile Electronics. Hierfür erhält sie ein Fördervolumen von rund 300.000 Euro vom Ministerium für Kultur und Wissenschaft des Landes Nordrhein-Westfalen.

Für die neue Vertiefungsrichtung werden die wichtigsten Kompetenzen aus den Fachbereichen Elektrotechnik und Informatik sowie Textil- und Bekleidungstechnik kombiniert. Ziel ist es Spezialisten im Bereich Smart Textiles für die Industrie der Zukunft auszubilden und sie auf die Hürden der Branche vorzubereiten.

Hierfür wird den Studierenden nicht nur Wissen aus den beiden Kernkompetenzen vermittelt, sondern auch ein Fokus auf Digitalkompetenz und Soft Skills gelegt. Das Ausbilden von fachlich versierten und flexiblen Spezialisten in einer sich stetig weiterentwickelnden Branche ist der Kernanspruch der neuen Vertiefung.

  • Programm für Mastervertiefung mit 300.000 Euro gefördert

Der Megatrend Digitalisierung macht auch vor der Modebranche nicht Halt. Um mit der Entwicklung und dem Anspruch der Branche mithalten zu können entwickelt die Hochschule Niederrhein (HSNR) eine neue, fachübergreifende Vertiefungsrichtung für Masterstudiengänge: Textile Electronics. Hierfür erhält sie ein Fördervolumen von rund 300.000 Euro vom Ministerium für Kultur und Wissenschaft des Landes Nordrhein-Westfalen.

Für die neue Vertiefungsrichtung werden die wichtigsten Kompetenzen aus den Fachbereichen Elektrotechnik und Informatik sowie Textil- und Bekleidungstechnik kombiniert. Ziel ist es Spezialisten im Bereich Smart Textiles für die Industrie der Zukunft auszubilden und sie auf die Hürden der Branche vorzubereiten.

Hierfür wird den Studierenden nicht nur Wissen aus den beiden Kernkompetenzen vermittelt, sondern auch ein Fokus auf Digitalkompetenz und Soft Skills gelegt. Das Ausbilden von fachlich versierten und flexiblen Spezialisten in einer sich stetig weiterentwickelnden Branche ist der Kernanspruch der neuen Vertiefung.

Mögliche übergreifende Module sind Smart Textiles, Angewandte Nanotechnologie oder Funktionalisierung Technischer Textilien.

„Als transdisziplinär ausgebildete Experten setzen die Absolventinnen und Absolventen neue Impulse auf den Gebieten Elektrotechnik, Smart Health sowie Textil- und Bekleidung. Sie treiben neue Innovationen aus dem Bereich Internet-of-Things, smarte fortgeschrittene Sensorik und tragbare Elektronik voran und setzen diese um“, sagen Dr. Anne Schwarz-Pfeiffer, Professorin für Funktionale Textilien am Fachbereich Textil- und Bekleidungstechnik und Prof. Dr. Ekaterina Nannen, Repräsentantin des Fachbereichs Elektrotechnik und Informatik.

Die Vertiefungsrichtung wird im Rahmen der Förderrichtlinie Curriculum 4.0 NRW entwickelt. Eine Einbindung in das Lehrangebot soll im Wintersemester 2023 erfolgen.

Source:

Hochschule Niederrhein

23.11.2020

AMAC cooperates with start-up FibreCoat

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

FibreCoat launches ALUCOAT™, an aluminum-coated glass or basalt fibre which is suitable as electro-magnetic shielding material in automotive applications such as radar, antennas or for autonomous driving as well as for mobile phones and applications in buildings. Due to its extraordinary thermal conductivity and better heat transfer compared to traditional composite material, it can be used for the manufacturing of automotive battery trays or industrial applications such as fine particulate air filters.

ALUCOAT™ is available as of January 1st 2021 as a yarn, fabric or non-woven with a wide range of possible titers and areal weight. The material will offer an electrical conductivity of 100 Ωm and a working temperature of at least 400 °C. Furthermore, it can be used for the shielding of low to high frequencies with an effectiveness of 80 to 120 dB.

Source:

AMAC GmbH

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes (c) Wilhelm-Lorch-Stiftung
Wilhelm-Lorch-Stiftung sponsorship award winner picture 2020 (Ricarda Wissel: row 1, first from right, Simon Kammler, row 4, first from right)
25.06.2020

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

Drei Professorinnen erhalten 150.000 Euro für Innovationen (c) Hochschule Niederrhein
Drei Professorinnen erhalten 150.000 Euro für Innovationen
18.12.2019

Hochschuhe Niederrhein: Drei Professorinnen erhalten 150.000 Euro für Innovationen

Drei Professorinnen der Hochschule Niederrhein werden ab 1. Januar 2020 durch das Programm „Innovationen in der digitalen Hochschullehre“ mit 150.000 Euro gefördert. Das Ministerium für Kultur und Wissenschaft Nordrhein NRW und der Stifterverband schreiben die Programmlinie jährlich aus. Gefördert werden Lehrprojekte, die sich durch Innovation, Transferpotenzial und Relevanz für die Weiterentwicklung der Hochschullehre auszeichnen.

Prof. Dr. Anne-Friederike Hübener vom Fachbereich Sozialwesen der Hochschule Niederrhein erhält für ihr Lehrprojekt eine individuelle personengebundene Förderung (Fellowship), die mit 50.000 Euro dotiert ist. Die Professorin für Sozialmedizin vermittelt eine zentrale Kompetenz für Fachkräfte der Sozialen Arbeit: die Fähigkeit zum Verstehen von abweichendem Verhalten, psychischen Störungen und krisenhaften Verläufen unter dem Gesichtspunkt bio-psycho-sozialer Zusammenhänge. In den Seminaren bearbeiten die Studierenden in Teams lebensnahe Fallvideos, dokumentieren ihre Lernprozesse audiovisuell und werten sie aus. So wird die Selbstreflexion medial gestützt und das problemorientierte Fallverständnis berufsqualifizierend trainiert.

Drei Professorinnen der Hochschule Niederrhein werden ab 1. Januar 2020 durch das Programm „Innovationen in der digitalen Hochschullehre“ mit 150.000 Euro gefördert. Das Ministerium für Kultur und Wissenschaft Nordrhein NRW und der Stifterverband schreiben die Programmlinie jährlich aus. Gefördert werden Lehrprojekte, die sich durch Innovation, Transferpotenzial und Relevanz für die Weiterentwicklung der Hochschullehre auszeichnen.

Prof. Dr. Anne-Friederike Hübener vom Fachbereich Sozialwesen der Hochschule Niederrhein erhält für ihr Lehrprojekt eine individuelle personengebundene Förderung (Fellowship), die mit 50.000 Euro dotiert ist. Die Professorin für Sozialmedizin vermittelt eine zentrale Kompetenz für Fachkräfte der Sozialen Arbeit: die Fähigkeit zum Verstehen von abweichendem Verhalten, psychischen Störungen und krisenhaften Verläufen unter dem Gesichtspunkt bio-psycho-sozialer Zusammenhänge. In den Seminaren bearbeiten die Studierenden in Teams lebensnahe Fallvideos, dokumentieren ihre Lernprozesse audiovisuell und werten sie aus. So wird die Selbstreflexion medial gestützt und das problemorientierte Fallverständnis berufsqualifizierend trainiert.

Dieses Jahr wurden bei der Programmlinie erstmals auch Fellowships an Lehrende vergeben, die mit einem Lehrenden aus einem anderen Studienfach kooperieren. Prof. Dr. Ekaterina Nannen vom Fachbereich Elektrotechnik und Informatik und Prof. Dr. Anne Schwarz-Pfeiffer vom Fachbereich Textil- und Bekleidungstechnik erhalten für ihr gemeinsames Projekt „Smart Electronic Textiles“ ein Tandem-Fellowship in Höhe von 100.000 Euro.

Die zwei Professorinnen konzipieren ein Master-Modul, in dem Studierende beider Fachbereiche smarte elektronische Textilien entwickeln. Die Studierende erarbeiten digitale Lehrinhalte in einem Blended-Reality-Praktikum, bei dem E-Learning und Präsenzveranstaltungen miteinander kombiniert werden. Dabei kommt die Augmented-Reality-Technologie (erweiterte Realität) zum Einsatz, um ortsunabhängig, interaktiv und in interdisziplinären Teams zu arbeiten. Die Ergebnisse der Studierenden werden in Videoblogeinträgen veröffentlicht. Der Kurs soll abschließend anderen Hochschulen im EU-Kontext zur Verfügung gestellt werden.

Die Professorinnen sind drei von insgesamt 42 Wissenschaftlerinnen und Wissenschaftlern, die ein Fellowship erhalten. Der Förderzeitraum beträgt maximal ein Jahr.

The cushion helps the user to operate different applications by means of sensor surfaces, light and wireless communication, for example an alarm function by light. (c) ITA
The cushion helps the user to operate different applications by means of sensor surfaces, light and wireless communication, for example an alarm function by light.
22.02.2019

Smart Textiles Micro Factory brings Smart Textiles into series production at Texprocess 2019

The study "Technologies, Markets and Players" by E-Textiles 2018-2028 predicts a 2 billion dollar growth of the smart textile market. This growth can only be achieved by replacing the existing approaches, mostly manual production, with series production. With the Smart Textiles Micro Factory, the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be demonstrating for the first time on the Texprocess stand, stand number C02, in the transition from Halls 4.1 and 5.1 how a smart textile can be manufactured from design to finished product together with various partners by producing a smart cushion.

The product and the manufacturing process are the result of co-innovation. In the future, co-innovation for smart textiles is to be implemented via the GeniusTex platform. As part of the German Federal Ministry of Economic Affairs and Energy's major strategic project for the “Smart Service World”, ITA is working with partners from industry and research to develop the online platform for smart textile innovation.

The study "Technologies, Markets and Players" by E-Textiles 2018-2028 predicts a 2 billion dollar growth of the smart textile market. This growth can only be achieved by replacing the existing approaches, mostly manual production, with series production. With the Smart Textiles Micro Factory, the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be demonstrating for the first time on the Texprocess stand, stand number C02, in the transition from Halls 4.1 and 5.1 how a smart textile can be manufactured from design to finished product together with various partners by producing a smart cushion.

The product and the manufacturing process are the result of co-innovation. In the future, co-innovation for smart textiles is to be implemented via the GeniusTex platform. As part of the German Federal Ministry of Economic Affairs and Energy's major strategic project for the “Smart Service World”, ITA is working with partners from industry and research to develop the online platform for smart textile innovation.

“mtex+” textile fair & convention raises profile and increases international appeal (c) mtex+ / Kristin Schmidt
These Czech exhibitors presented technical textiles and lightweight textile components at the 2018 “mtex+” at Chemnitz Trade Fair Centre. The 8th “mtex+” is being held as the “Fair & Convention for Hightech Textiles” in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 – 10 June 2020.
20.02.2019

“mtex+” textile fair & convention raises profile and increases international appeal

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

More information:
mtex
Source:

vti-pressedienst      mtex+ press service