From the Sector

Reset
455 results
Foto: Unplash
10.08.2022

High-tech center for cotton processing and fiber-to-fiber recycling being built in Africa

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

As well as producing fabric from sustainably grown virgin cotton, a joint venture with Shandong-based WOL Textiles Ltd., a privately owned plant that has long supplied the African market, the mill will be home to a state-of-the-art shredding and recycling facility, a joint venture between IFFAC and the Dutch Circularity B.V. CEO Han Hamers of Circularity B.V. in The Netherlands, has been involved in the production of 100% circular knit and woven articles.

The mill project is expected to create over a thousand jobs. The surrounding area already boasts a significant number of experienced textile workers ready to be retrained on the new equipment. While the majority of the products created will be sold within the region, all processes will confirm to new EU Supply Chain Law to allow for the possibility of export.  

Output is forecast at six million pieces of finished clothing and twenty-five million metres of spun and woven cloth per year. In total, thirty million US$ of investment will be made in the site with operations ready to begin next year (2023).

More information:
IFFAC Africa Recycling
Source:

Circularity Germany GmbH i.G.

10.08.2022

Bluesign defines “sustainable attributes” for approved chemicals

By defining “sustainable attributes” for bluesign® APPROVED chemicals registered in the bluesign® FINDER, Bluesign is furthering its ability to provide more sustainable solutions by providing specified search functions to help chemical suppliers and the textile industry make better informed decisions. The bluesign® FINDER is a web-based, advanced search engine for manufacturers. It contains a positive list of preferred chemical products. Today more than 20,000 bluesign® APPROVED chemical products are registered in the bluesign® FINDER.

Bluesign® APPROVED chemical products meet the stringent bluesign® CRITERIA for chemical assessment. That means that the approved chemicals are produced following occupational health and safety (OH&S) practices with less environmental impact and excellent Product Stewardship following the principles of Input Stream Management and sustainable chemistry.

By defining “sustainable attributes” for bluesign® APPROVED chemicals registered in the bluesign® FINDER, Bluesign is furthering its ability to provide more sustainable solutions by providing specified search functions to help chemical suppliers and the textile industry make better informed decisions. The bluesign® FINDER is a web-based, advanced search engine for manufacturers. It contains a positive list of preferred chemical products. Today more than 20,000 bluesign® APPROVED chemical products are registered in the bluesign® FINDER.

Bluesign® APPROVED chemical products meet the stringent bluesign® CRITERIA for chemical assessment. That means that the approved chemicals are produced following occupational health and safety (OH&S) practices with less environmental impact and excellent Product Stewardship following the principles of Input Stream Management and sustainable chemistry.

In addition to the existing functions within the bluesign® FINDER, bluesign® SYSTEM PARTNER chemical suppliers can claim selected sustainability attributes for their bluesign® APPROVED chemical products that will be displayed within the bluesign® FINDER. Sustainability claims will be verified by Bluesign during on-site assessments and through chemical assessments. Requirements and data provisions will be laid out in the criteria: bluesign® CRITERIA for chemical assessment ANNEX: Sustainability attributes for bluesign® APPROVED chemical products.

The bluesign® FINDER will be amended with search functions starting this year with the below first priority attributes:

  1. Renewable feedstock (biomass* or bio-based)
    The sustainability attribute ‘Renewable feedstock (biomass or bio-based)’ is intended for use with any chemical product that contains at least 20% biomass content by weight in the form of biomass-derived carbon.
  2. Sustainably sourced renewable feedstock (biomass* or bio-based)
    The sustainability attribute ‘sustainably sourced renewable feedstock (biomass or bio-based)’ is intended for use with any chemical product that contains at least 20% biomass content by weight in the form of biomass-derived carbon. The biomass content shall originate from land that is certified sustainable.
  3. Recycled content
    The sustainability attribute ‘Recycled content’ is intended for use with any chemical product that contains at least 20% recycled content by weight. For the calculation of the recycled content only the dry content of the chemical product shall be regarded, excluding water.
More information:
bluesign chemicals Sustainability
Source:

Bluesign

09.08.2022

Carbios joined WhiteCycle to process and recycle plastic textile waste

  • An innovative European project to process and recycle plastic textile waste
  • A partnership to reach the objectives set by the European Union in reducing CO2 emissions by 2030
  • A unique consortium rallying 16 public and private European organizations working together for more circular economy

Carbios joined WhiteCycle, a project coordinated by Michelin, which was launched in July 2022. Its main goal is to develop a circular solution to convert complex[1] waste containing textile made of plastic into products with high added value. Co-funded by Horizon Europe, the European Union’s research and innovation program, this unprecedented public/private European partnership includes 16 organizations and will run for four years.
 

  • An innovative European project to process and recycle plastic textile waste
  • A partnership to reach the objectives set by the European Union in reducing CO2 emissions by 2030
  • A unique consortium rallying 16 public and private European organizations working together for more circular economy

Carbios joined WhiteCycle, a project coordinated by Michelin, which was launched in July 2022. Its main goal is to develop a circular solution to convert complex[1] waste containing textile made of plastic into products with high added value. Co-funded by Horizon Europe, the European Union’s research and innovation program, this unprecedented public/private European partnership includes 16 organizations and will run for four years.
 
WhiteCycle envisions that by 2030 the uptake and deployment of its circular solution will lead to the annual recycling of more than 2 million tons of the third most widely used plastic in the world, PET[2]. This project should prevent landfilling or incineration of more than 1.8 million tons of that plastic each year. Also, it should enable reduction of CO2 emissions by around 2 million tons.
 
Complex waste containing textile (PET) from end-of-life tyres, hoses and multilayer clothes are currently difficult to recycle, but could soon become recyclable thanks to the project outcomes. Raw material from PET plastic waste could go back into creation of high-performance products, through a circular and viable value chain.
 
Public and private European organizations are combining their scientific and industrial expertises:

  • industrial partners (Michelin, Mandals, KORDSA);
  • cross-sector partnership (Inditex)
  • waste management companies (Synergies TLC, ESTATO);
  • intelligent monitoring systems for sorting (IRIS);
  • biological recycling SME (Carbios);
  • product life cycle analysis company (IPOINT);
  • university, expert in FAIR data management (HVL);
  • universities, research and technology organizations (PPRIME – Université de Poitiers/CNRS, DITF, IFTH, ERASME);
  • industry cluster (Axelera);
  • project management consulting company (Dynergie).

 
The consortium will develop new processes required throughout the industrial value chain:

  • Innovative sorting technologies, to enable significant increase of the PET plastic content of complex waste streams in order to better process them;
  • A pre-treatment for recuperated PET plastic content, followed by a breakthrough recycling enzyme-based process to decompose it into pure monomers in a sustainable way;
  • Repolymerization of the recycled monomers into like new plastic;
  • Fabrication and quality verification of the new products made of recycled plastic materials

 
WhiteCycle has a global budget of nearly 9.6 million euros and receives European funding in the amount of nearly 7.1 million euros. The consortium’s partners are based in five countries (France, Spain, Germany, Norway and Turkey). Coordinated by Michelin, it has an effective governance system involving a steering committee, an advisory board and a technical support committee.

[1] Complex waste: multi materials waste (Rubber goods composites and multi-layer textile)
[2] PET: Polyethylene terephthalate

Source:

Carbios

03.08.2022

Sustainable Developments in Absorbent Hygiene & Personal Care at Hygienix™

  • INDA Announces Full Program and Opens Registration for Premier Event in New Orleans

With reusable and recyclable products and new inputs offering growth opportunities in absorbent hygiene and personal care products, Hygienix™ will provide an insightful view into the market’s future this November in New Orleans.

Industry participants from around the world and throughout the supply chain will convene and connect for the eighth edition of the premier event for the fast-growing segment on November 14-17, at The Roosevelt New Orleans Hotel.

The in-person conference will highlight the segment’s continued growth and new opportunities with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and more as well as the latest market forecasts and insights into consumer buying trends.

  • INDA Announces Full Program and Opens Registration for Premier Event in New Orleans

With reusable and recyclable products and new inputs offering growth opportunities in absorbent hygiene and personal care products, Hygienix™ will provide an insightful view into the market’s future this November in New Orleans.

Industry participants from around the world and throughout the supply chain will convene and connect for the eighth edition of the premier event for the fast-growing segment on November 14-17, at The Roosevelt New Orleans Hotel.

The in-person conference will highlight the segment’s continued growth and new opportunities with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and more as well as the latest market forecasts and insights into consumer buying trends.

Hygienix also will offer two specialized workshops, and a myriad of business connection opportunities including a welcome reception on Nov. 14 and a first-time attendee mentorship program.
Participants will discover innovative products in absorbent hygiene and personal care at tabletop exhibits with evening receptions on Nov. 15-16, providing opportunities for 60 companies to showcase their unique offerings.

Three finalists will each present their innovative and technically sophisticated disposable absorbent hygiene products as they vie for the prestigious Hygienix Innovation Award™. Nominations are open until August 29. Demonstrating the interest in sustainability, last year’s award recipient was Kudos Diaper Subscription featuring its 100% cotton disposable diaper.

Hygienix Highlights
Absorbent hygiene – the single largest nonwoven end‐use category (by square meters) – is expected to continue its strong growth over the next four years, creating market opportunities in this thriving area driven by growing consumer interest for environmentally-friendly options in material inputs and end-of-life options.

Participants will hear the latest data and forecasts from analysts during presentations by Robert Fry, Jr., Ph.D., Principal of Robert Fry Economics LLC on the Global Economy – What we Can Expect in 2023; Pricie Hanna, Managing Partner, and Colin Hanna, Director of Market Research, Price Hanna Consultants on Disposables versus Reusables; and Simon Preisler, Vice President of Logistics, Central National Gottesman delivering a Logistic Market Update.

A panel of entrepreneurs will discuss the challenges, biases and taboos to bringing innovations into the marketplace. Experts sharing their insights will be Mia Abbruzzese and Alexandra Fennell, co-founders of Grace; Amrita Saigal, founder and CEO, Kudos; and Cindy Santa Cruz, President of ParaPatch.

A session on Next-Generation Menstrual Products and their Users will feature Liying Qian, Research Analyst, Euromonitor International providing market data on disposable and reusable period products; Frantisek Riha-Scott, Founder, Confitex discussing reusable products; and Greta Meyer, Co-Founder and CEO, Sequel on Reengineering the Tampon.
Also focusing on period products will be a presentation by Danielle Keiser, Managing Director, Impact, Madami on Changing the Conversation with Consumersmoderated by Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC.

Other intriguing not-to-be-missed presentations centered on sustainability trends include:

  • Assessing Sustainable Fiber Options in the Context of Disposable Hygienic Products – Richard Knowlson, Principal, RPK Consulting LLC
  • Five Generations of Hygiene + Sustainability – Matt Schiering, Professor of Marketing, Dominican University
  • Recycling Approaches for Disposable Diaper Waste – Jeannine Cardin, Quality and R&D, RecycPHP Inc.

Hygienix will provide additional focused learning opportunities with two essential short courses (with separation registration fees) on Nov. 14 focused on Absorption Systems for Absorbent Hygiene Products, from 1 to 3:30 p.m. and Global Diaper Trends from 3:45 to 6 p.m.

More information:
Hygienix INDA
Source:

INDA

IVL
03.08.2022

Winners of the RECO Sustainable Young Designer Competition

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

RECO awarded finalists and winners with 500,000 baht in prizes to support their careers. First prize of 125,000 baht was awarded to 23-year-old emerging furniture designer Prem Buachum for his ‘The Origin of Rebirth’ collection, using fabric recycled from post-consumer PET bottles. The first runner-up, Sathitkhun Boonmee, was awarded 75,000 baht for his ‘Remembering Your Favorite Teddy Bear’ collection, using old dolls made of polyester fibers. Second runners-up, Worameth Monthanom and Tanakorn Sritong, received 50,000 baht for their ‘Regeneration of Nature (into Spring)’ collection, using unused fabrics and discarded PET film. Napat Tansuwan, a finalist with his’ Don’t Judge’ collection, will go on to create designer merchandise for sponsor Buriram United Football Club using local weaving techniques from communities in Buriram province.

Mrs. Aradhana Lohia Sharma, Vice President at Indorama Ventures and RECO Young Designer Competition Chairperson, said, “Since 2011, RECO's ambition has been to uplift recycling and inspire people to realize the value of recyclable materials to produce great new products for daily life. We have witnessed many thoughtful initiatives on upcycling through the collections created by our talented young Thai designers. The designs this year showcase stunning wearability and innovation while using a large percentage of recycle materials. Public interest in recycling has been growing immensely, and we are grateful to strengthen the relationship with partners like Buriram United Football Club.”

“Indorama Ventures hopes this competition will be a driving force in nurturing sustainable fashion concepts and increasing the acceptance of recycled materials, especially post-consumer PET. We are proud to be a stepping-stone for our youth's design journey and our community’s sustainable future.”

Source:

IVL

02.08.2022

DNFI Award 2022 open for applications – Deadline 9 Sept

Natural fibres offer mechanical strength, low weight, and resilience, as well as renewability and biodegradability, making them ideal partners to high-tech, modern, and sustainable textile applications. The DNFI Innovation in Natural Fibres Award offers recognition for outstanding design and innovation in this important textile sector.

The DNFI award has proven to be successful in raising awareness of the outstanding work being done by specialists in this field and previous winners speak of their appreciation for the subsequent media coverage and interest in their work.

  • Applicants are invited to submit their proposals by email to: Secretariat@dnfi.org.
  • Application templates are available on the DNFI web site: https://www.dnfi.org/dnfi-award
  • Closing Date for award applications is 9. September 2022.
  • A maximum of two extra pages (for a total of three pages) of information and three photographs/graphs/tables may be included with this submission.

Natural fibres offer mechanical strength, low weight, and resilience, as well as renewability and biodegradability, making them ideal partners to high-tech, modern, and sustainable textile applications. The DNFI Innovation in Natural Fibres Award offers recognition for outstanding design and innovation in this important textile sector.

The DNFI award has proven to be successful in raising awareness of the outstanding work being done by specialists in this field and previous winners speak of their appreciation for the subsequent media coverage and interest in their work.

  • Applicants are invited to submit their proposals by email to: Secretariat@dnfi.org.
  • Application templates are available on the DNFI web site: https://www.dnfi.org/dnfi-award
  • Closing Date for award applications is 9. September 2022.
  • A maximum of two extra pages (for a total of three pages) of information and three photographs/graphs/tables may be included with this submission.
More information:
DNFI DNFI award
Source:

DNFI

01.08.2022

Stahl joins CLIB biotechnology network

Stahl, an active proponent of responsible chemistry, has joined CLIB, an international open innovation cluster of stakeholders in the biotechnology space. CLIB is committed to providing networking opportunities for its members across different industries and sectors with a view to using biotechnology to foster sustainability. Stahl’s membership of the network underlines the company’s commitment to open innovation and to working with partners across value chains to reduce its Scope 3 emissions.

Stahl, an active proponent of responsible chemistry, has joined CLIB, an international open innovation cluster of stakeholders in the biotechnology space. CLIB is committed to providing networking opportunities for its members across different industries and sectors with a view to using biotechnology to foster sustainability. Stahl’s membership of the network underlines the company’s commitment to open innovation and to working with partners across value chains to reduce its Scope 3 emissions.

CLIB members include large companies, SMEs, start-ups, academic institutes, universities, and other stakeholders engaged in biotechnology and the circular- and bioeconomy as a whole. As part of this cluster, Stahl seeks to connect with likeminded contacts and partners to explore opportunities for increasing the use of bio-based and bio-derived solutions in its chemistries, products, and applications. In turn, Stahl hopes to add value to other members of the network by providing a route to market for biotechnology solutions through the company’s extensive range of industrial products and applications.
 
Stahl’s first face-to-face interaction with its fellow CLIB members will take place at the CLIB Networking Day in October 2022.

More information:
Stahl CLIB biotechnology
Source:

Stahl Holdings B.V.

25.07.2022

Carbios: Strengthening its leadership in the biorecycling of plastics and textiles

  • Exceptional achievement of research work on the use of Nuclear Magnetic Resonance (NMR) spectroscopy for understanding PET depolymerization enzymes

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers, announces the publication of an article entitled “An NMR look at an engineered PET depolymerase” in the scientific journal Biophysical Journal.

The article describes the use of Nuclear Magnetic Resonance (NMR) spectroscopy to study the thermal stability of PET depolymerization enzymes and the mechanism of adsorption of the enzyme on the polymer. This innovative approach, which required months of development, is a world first and opens up new ways of improving these enzymes. This publication confirms Carbios' international lead in the development of the most efficient enzymes for the depolymerization and recycling of plastics.

  • Exceptional achievement of research work on the use of Nuclear Magnetic Resonance (NMR) spectroscopy for understanding PET depolymerization enzymes

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers, announces the publication of an article entitled “An NMR look at an engineered PET depolymerase” in the scientific journal Biophysical Journal.

The article describes the use of Nuclear Magnetic Resonance (NMR) spectroscopy to study the thermal stability of PET depolymerization enzymes and the mechanism of adsorption of the enzyme on the polymer. This innovative approach, which required months of development, is a world first and opens up new ways of improving these enzymes. This publication confirms Carbios' international lead in the development of the most efficient enzymes for the depolymerization and recycling of plastics.

Prof. Alain Marty, Chief Scientific Officer of Carbios and co-author of the article, explains: “ Nearly 25 researchers are currently working on our unique enzymatic technology. It is based on academic collaborations with the world's leading experts in their fields..”

Dr. Guy Lippens, CNRS Research Director and co-author of the artcle, adds: “Nuclear Magnetic Resonance (NMR) is an extraordinary biophysical technique for visualizing an enzyme directly in solution. Our study is the first to use NMR as a complementary technique to crystallography and molecular modeling to observe a PETase. This gives new perspectives to better understand the functioning of these enzymes and it makes it possible to imagine new ways of improving these enzymes. ”

More information:
Carbios de-polymerization
Source:

Carbios

Geno and Aquafil
21.07.2022

Geno and Aquafil: Pre-commercial production for plant-based nylon-6

Genomatica (Geno) alongside longtime collaborator Aquafil [ECNL:IM] successfully completed the first demonstration scale production runs for plant-based nylon-6. The material is intended to reshape the $22B nylon industry, enabling brands to meet demand from consumers for sustainable everyday materials from apparel to automotive parts to carpets. Geno and Aquafil have produced the first several tons of plant-based nylon-6 building block caprolactam, have converted it to nylon-6 polymer, and are now in the process of transforming it for evaluation in nylon applications such as yarns for textile and carpet and engineering plastics as part of pre-commercial quantities from demonstration production taking place in Europe.

The companies have been collaborating to first produce pilot-scale quantities of plant-based nylon-6 and have now advanced to produce pre-commercial quantities at demonstration scale which will help determine the final design of future commercial plants. The material will go to leading global brands and their value chain partners who are eager to explore and develop renewable products, create showcase goods and test feedback with customers.

Genomatica (Geno) alongside longtime collaborator Aquafil [ECNL:IM] successfully completed the first demonstration scale production runs for plant-based nylon-6. The material is intended to reshape the $22B nylon industry, enabling brands to meet demand from consumers for sustainable everyday materials from apparel to automotive parts to carpets. Geno and Aquafil have produced the first several tons of plant-based nylon-6 building block caprolactam, have converted it to nylon-6 polymer, and are now in the process of transforming it for evaluation in nylon applications such as yarns for textile and carpet and engineering plastics as part of pre-commercial quantities from demonstration production taking place in Europe.

The companies have been collaborating to first produce pilot-scale quantities of plant-based nylon-6 and have now advanced to produce pre-commercial quantities at demonstration scale which will help determine the final design of future commercial plants. The material will go to leading global brands and their value chain partners who are eager to explore and develop renewable products, create showcase goods and test feedback with customers.

Plant-based nylon-6 is Geno’s third major product line on a path to commercialization. The company has executed high impact deals with a range of brands to accelerate the global commercialization of sustainable materials, with the potential to reduce greenhouse gas emissions by 100 million tons in upcoming years. Recent milestones advancing the sustainable materials transition include: a collaboration with lululemon (NASDAQ: LULU) to bring plant-based materials into lululemon’s products, a production milestone with partner Covestro (OTCMKTS: COVTY) for plant-based HMD used in sustainable coatings, and a partnership with Asahi Kasei (OTCMKTS: AHKSY) and a newly formed venture with Unilever (NASDAQ: UL) to commercialize and scale plant-based alternatives to feedstocks like palm oil or fossil fuels, to make key ingredients used in everyday cleaning and personal care products.

Source:

method communications

21.07.2022

EPIC Group and CleanKore: Plans to Advance Sustainable Denim

The partnership will aim at eliminating hazardous Potassium Permanganate Spray and most manual processes in denim finishing, while reducing Greenhouse Gas emissions, water and chemical use in the process

Hong Kong based Epic Group, a leading garment manufacturer for global brands today announced its strategic partnership with CleanKore, a denim innovation and patent licensing company. This partnership aims at scaling the CleanKore patented yarn dyeing technology that provides numerous sustainability benefits for both the denim mill and garment manufacturer.

CleanKore patented technology changes the chemistry and the process used to dyeing yarns at the denim mills by keeping intact the white core of the yarn and only dyeing the surface. This technology significantly reduces water, chemicals and process time in the denim garment finishing stage.

The partnership will aim at eliminating hazardous Potassium Permanganate Spray and most manual processes in denim finishing, while reducing Greenhouse Gas emissions, water and chemical use in the process

Hong Kong based Epic Group, a leading garment manufacturer for global brands today announced its strategic partnership with CleanKore, a denim innovation and patent licensing company. This partnership aims at scaling the CleanKore patented yarn dyeing technology that provides numerous sustainability benefits for both the denim mill and garment manufacturer.

CleanKore patented technology changes the chemistry and the process used to dyeing yarns at the denim mills by keeping intact the white core of the yarn and only dyeing the surface. This technology significantly reduces water, chemicals and process time in the denim garment finishing stage.

Denim garment finishing often involves onerous manual processes such as handsanding and hand whiskering, spraying of harmful Potassium Permanganate (PP) (done by heavily protective equipment donned personnel), and multiple washing cycles. CleanKore technology coupled with lasers enable elimination of the PP spray process, significantly improving health and wellbeing of apparel workers, as well as emissions of harmful chemicals. Manual processes are eliminated in most styles and significantly reduced in others.

CleanKore technology also enables the reduction of wash cycles – reducing water, chemical use and process time, adding to the sustainability credentials of the end products. The products currently tested by Epic Group and CleanKore demonstrate up to 44% of water savings in garment finishing and up to 60% of energy savings in the fabric dyeing stage, along with the elimination of PP spray.

Through their partnership, Epic Group and CleanKore are planning to rapidly scale up the adoption of this technology in partnership with Epic Group’s customer base. In the first year, the partnership plans to reach over 4 million pairs of denim and working towards a scale of 15 - 20 million pairs of denim per annum in the next 3 years, converting a large portion of Epic Group’s denim production to CleanKore technology.

Source:

EPIC Group & CleanKore

(c) INNATEX
19.07.2022

INNATEX: Countdown to 50th international trade fair for sustainable textiles

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

Alongside standard bodies such as IVN and GOTS, which have taken part in INNATEX for many years, younger projects such as Fairmodel and the digital platform Retraced will be part of this special area. Fairtrade Germany, Femnet and the VDMD are to be found there too. Almost all of them are joining in with the Ask Me Anything dialouge format. Interested attendees can pre-book a slot of up to ten minutes for a personal discussion with the expert of their choice.

The supportive activities that had to be suspended during the pandemic are enjoying a comeback at this year’s summer fair: five newcomers to INNATEX designated DesignDiscoveries will be presenting their projects in another special area. Vegtus, from Barcelona, produces sneakers and other products from cactus leather. Natural textiles such as organic cotton are used by Lounge Cherie, a yoga fashion label.

Products for kids through to seniors, classics and streetwear, footwear and accessories
Nordlicht similarly relies on recyclable, renewable natural fibres for its outerwear, bags and accessories. The field of circular fashion is also served by the remaining two Design Discoveries. Both Nature is Future, with its handmade sneakers, and Freibeutler, with its functional rucksacks, make extensive use of recycled materials, while also paying due attention to broader sustainability aspects.

Regular INNATEX exhibitors include Lana, Chapati and Didymos, all of whom are also celebrating anniversaries. Labels such as Anokho with their colourful accessories in jacquard fabrics and Danish label Angel Circle with its plus-size fashion are exhibiting for the first time.

Source:

INNATEX / UBERMUT GbR

(c) adidas AG
15.07.2022

adidas launches its first product in collaboration with Spinnova

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

Made in part with Spinnova technology , a minimum of 30% of the fabric in the adidas TERREX HS1 comes from wood-based SPINNOVA® fibres (other fibres)* that are made by grinding wood pulp with water into a paste and then spun into a textile fibre.

The product also works with the material’s natural color. Since no dyeing or bleaching is applied, in turn this uses less water compared to the standard dyeing process.

* (Rayon) in US, (New type of cellulose fibre) in China

More information:
adidas Spinnova Fibers fibres Recycling
Source:

adidas AG

15.07.2022

RadiciGroup publishes Sustainability Report 2021

  • Sustainability Report 2021 combines financial and non-financial performance indicators
  • 2011-2021: 60% reduction in greenhouse gas emissions per metric ton produced. 51.7% renewable source energy achieved
  • ESG criteria (environmental impact (E), social values (S), organizational governance (G)) determine sustainability strategy

The new RadiciGroup Sustainability Report has been published. With the goal of continuous improvement, the 2021 report has a broader reporting boundary compared to prior years and takes into consideration all the Group companies, including sales and service companies. Over 30 sites located across Asia, North America, South America and Europe have provided their 2021 data on economic, social and environmental performance.

  • Sustainability Report 2021 combines financial and non-financial performance indicators
  • 2011-2021: 60% reduction in greenhouse gas emissions per metric ton produced. 51.7% renewable source energy achieved
  • ESG criteria (environmental impact (E), social values (S), organizational governance (G)) determine sustainability strategy

The new RadiciGroup Sustainability Report has been published. With the goal of continuous improvement, the 2021 report has a broader reporting boundary compared to prior years and takes into consideration all the Group companies, including sales and service companies. Over 30 sites located across Asia, North America, South America and Europe have provided their 2021 data on economic, social and environmental performance.

Not only indicators of a financial nature but also measures of environmental impact (E), social values (S) and good organizational governance (G): the latter so-called ESG criteria have become a priority for RadiciGroup, which is preparing for the new European Union non-financial reporting directive in order to contribute to the transition towards a fully sustainable economic system and increase the value of its companies.

On the environmental front, the themes of climate change and decarbonization are RadiciGroup priorities and part of a policy aimed at the uncoupling of growth and resource usage. The Group undertakes to lower emissions from production and choose limited-impact energy sources. This commitment is confirmed by the numbers: in the 2011-2021 period, total emissions per metric ton produced were reduced by 60%, while renewable source energy used by the Group reached 51.7%. Specific investments to decrease environmental impact are ongoing: in 2021, EUR 3.1 million were allocated to introduce best available techniques and improve emissions abatement and energy efficiency.

RadiciGroup promotes professional growth by valuing competence and investment in training: Group training hours once again rose after the pandemic period from 36,000 hours in 2020 to 46,000 hours in 2021. The training method was often a hybrid, taking advantage of aspects experimented with during the pandemic, that is, less traveling and use of facilities in favour of higher groupwide attendance, without the need for participation limits. Fifty-five percent of total training hours was dedicated to health and safety, which has yielded positive results based on the related indicators.

Angelo Radici, president of RadiciGroup: “Today, the United Nations 2030 Agenda for Sustainable Development is our main guideline on sustainability issues. It shows us an ambitious scenario and urges us to confront a multitude of challenges that affect our enterprise from every point of view. We try to be quick to react and tenacious, staying faithful to our roots and our style, but expanding our perspective to become increasingly more competitive and proactive in the businesses we are engaged in. From the viewpoint of achieving less environmental impact in the future, we propose to be an enabler and facilitator for our stakeholders on themes such as the circular economy, where we see ourselves as protagonists in ecodesign and recycling, as well as innovation, which we put at the service of anyone who is processing and using our products, so as to offer real sustainability solutions together.”

Source:

RadiciGroup

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

(c) AkzoNobel
13.07.2022

AkzoNobel launches tool to drive bodyshop sustainability

Bodyshops can now take advantage of the vehicle refinish industry’s first repair calculator to measure, manage and reduce carbon emissions, which has been developed by AkzoNobel.

Designed to help customers improve their carbon footprint when using the company’s premium refinish products, the CO2eRepairCalculator* is part of a new initiative which aims to encourage bodyshops to become more sustainable.

The tool is the latest digital innovation from AkzoNobel focused on making a long-lasting difference to customers. It identifies the carbon levels associated with the painting and drying process – including the energy consumed – and is linked directly to the vehicle refinishing products being used. It also provides data relating to the emission of volatile organic compounds (VOCs), therefore helping customers to understand where improvements can be made.

When using the tool, the emissions and energy consumed are calculated based on a controlled two-panel repair in a spray booth to Greenhouse Gas Protocol accounting standards. The results are presented in an online dashboard, which allows local energy prices to be factored in.

Bodyshops can now take advantage of the vehicle refinish industry’s first repair calculator to measure, manage and reduce carbon emissions, which has been developed by AkzoNobel.

Designed to help customers improve their carbon footprint when using the company’s premium refinish products, the CO2eRepairCalculator* is part of a new initiative which aims to encourage bodyshops to become more sustainable.

The tool is the latest digital innovation from AkzoNobel focused on making a long-lasting difference to customers. It identifies the carbon levels associated with the painting and drying process – including the energy consumed – and is linked directly to the vehicle refinishing products being used. It also provides data relating to the emission of volatile organic compounds (VOCs), therefore helping customers to understand where improvements can be made.

When using the tool, the emissions and energy consumed are calculated based on a controlled two-panel repair in a spray booth to Greenhouse Gas Protocol accounting standards. The results are presented in an online dashboard, which allows local energy prices to be factored in.

The launch means it will now be easier for bodyshops to take positive action in an effort to meet their sustainability and carbon reduction targets. This is becoming increasingly important, as insurance companies are putting greater pressure on preferred bodyshop partners to cut their emissions in line with supply chain ambitions that meet the UN Sustainable Development Goals.

The CO2eRepairCalculator is currently being introduced in the UK market to Sikkens customers (with Lesonal to follow shortly). It will be rolled out across markets in Europe during the next few months.

*CO2e stands for carbon dioxide and equivalent gases. The tool measures carbon dioxide (CO2) and equivalent gases such as methane (CH4) and nitrous oxide (N2O), which all fall under the term greenhouse gases (GHGs).

More information:
AkzoNobel Coatings Automotive
Source:

AkzoNobel

08.07.2022

Bluesign announces expanded services

  • Goal: to further reduce the textile value chain’s impact on people and planet      

As the textile industry continues to grapple with evolving regulations, increased consumer and stakeholder pressure to meet sustainability goals, and the lack of verified data, bluesign® has updated its service offerings to help brands, manufacturers and chemical companies to better understand and manage their value chains.

The new initiatives expand Bluesign’s core competencies of reducing impact across the supply chain, providing reliable, third-party verified data, mitigating the use of hazardous chemicals through input stream management and replacing substances with bluesign® APPROVED chemistry (a positive list of chemical products with less impact on people and planet). Bluesign’s high value services are available for all companies willing to reduce the impact of their value chain without compromising on quality.     

  • Goal: to further reduce the textile value chain’s impact on people and planet      

As the textile industry continues to grapple with evolving regulations, increased consumer and stakeholder pressure to meet sustainability goals, and the lack of verified data, bluesign® has updated its service offerings to help brands, manufacturers and chemical companies to better understand and manage their value chains.

The new initiatives expand Bluesign’s core competencies of reducing impact across the supply chain, providing reliable, third-party verified data, mitigating the use of hazardous chemicals through input stream management and replacing substances with bluesign® APPROVED chemistry (a positive list of chemical products with less impact on people and planet). Bluesign’s high value services are available for all companies willing to reduce the impact of their value chain without compromising on quality.     

Bluesign is extending its System Partnership services and launching DATA SERVICES and IMPACT SERVICES for brands and manufacturers. These tiered service packages provide expanded capabilities that enable brands to actively monitor and manage their supply chain through Bluesign verified impact data, covering the critical measures of water consumption, energy consumption, greenhouse gas emissions, chemical consumption, and waste.

DATA SERVICES allow brands and manufacturers to access data from its unique supply chain and give a snapshot of their impact. Through the IMPACT SERVICE package, companies are provided this data plus a foundational assessment of its overall performance and detailed analysis of its suppliers.

The new IMPACT SERVICE enables manufacturers to present their achievements in impact reduction and their excellence in resource management.  The new tiered packages will allow companies to incrementally implement Bluesign’s services with the ultimate goal of attaining full SYSTEM PARTNERSHIP which includes company-specific action plans. At all service levels, a yearly impact report or dashboard is provided; access to this data enables accurate analysis for decision-making and reporting both internally and externally.

More information:
bluesign® bluesign
Source:

Bluesign

07.07.2022

Carbios, On, Patagonia, PUMA and Salomon team up to advance circularity

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 
Carbios’ innovative process constitutes a technological breakthrough for the recycling of polyester (PET) fibers, which are widely used in apparel, footwear and sportswear, on their own or together with other fibers. PET polyester is the most important fiber for the textile industry with 52 MT produced, even surpassing cotton at 23MT. The biorecycling process uses an enzyme capable of selectively extracting the polyester, recovering it to recreate a virgin fiber. This revolutionary technology makes it possible to recover the PET polyester present in all textile waste that cannot be recycled using traditional technologies.
 
PET plastics and fibers are used to make everyday consumer goods such as bottles, packaging and textiles. Today, most PET is produced from fossil resources, then used and discarded according to a wasteful linear model. By creating a circular economy from used plastics and fibers, Carbios’ biorecycling technology offers a sustainable and more responsible solution.

More information:
Carbios PET circularity
Source:

Carbios

(c) Enapter
06.07.2022

Fraunhofer UMSICHT: Start for Life Cycle Impact Zero Project

The electrolyser producer Enapter has set itself the goal of developing its entire production process to run without negative impacts on the environment. As an important step on this journey, it is building the Enapter Campus production facility, which will be powered entirely from renewable energy produced on-site and in the neighbouring Bioenergiepark. The site in in Saerbeck, North Rhine-Westphalia combines electrolyser production, an R&D building, administration and office space, as well as a cantine over 82,000 square metres. Now the company wants to investigate what other measures can be implemented to achieve its “Life Cycle Impact Zero” aspirations – together with researchers from Fraunhofer UMSICHT, the Wuppertal Institute and the Institute of Sustainable Nutrition (iSuN) of FH Münster.

The electrolyser producer Enapter has set itself the goal of developing its entire production process to run without negative impacts on the environment. As an important step on this journey, it is building the Enapter Campus production facility, which will be powered entirely from renewable energy produced on-site and in the neighbouring Bioenergiepark. The site in in Saerbeck, North Rhine-Westphalia combines electrolyser production, an R&D building, administration and office space, as well as a cantine over 82,000 square metres. Now the company wants to investigate what other measures can be implemented to achieve its “Life Cycle Impact Zero” aspirations – together with researchers from Fraunhofer UMSICHT, the Wuppertal Institute and the Institute of Sustainable Nutrition (iSuN) of FH Münster.

With the Life Cycle Impact Zero project, started on April 15, 2022, the parties want to develop and apply an especially comprehensive and holistic approach to environmental assessment. This includes chemical manufacturing and electrolyser production, as well as matters like the use of energy and water resources, the generation of waste or the human factor in general. This is intended to cover all interactions between business and people. That includes, in particular, Enapter’s employees, but also people in upstream and downstream value chains, users of the technology or residents close to the production site. A concept for sustainable employee catering is also being developed.

The basis for all environmental assessment that will be carried out is ISO 14040. The recognised international standard divides the research into four phases: Aim and scope of the study, inventory analaysis, impact assessment, as well as interpretation. Sensitivity analyses and scenario techniques are also used as further methods.

On the basis of these analyses, the 18-month project should derive concrete measures to avoid negative environmental impacts completely, if possible, for example in production, employee mobility or in energy supply. Furthermore, it will examine whether these measures are transferable to Enapter’s other locations – such as in Italy. Following on from the project, the steps defined should be implemented by Enapter in the next phase. In the subsequent Phase 3, a renewed analysis is planned. This will determine if the technological innovations achieved by then in the production and use of Enapter’s electrolysers can enable additional ecological improvements.

The Life Cycle Impact Zero project is supported by the State of NRW.

Source:

Fraunhofer UMSICHT

(c) INDA
06.07.2022

INDA: Highlights of the World of Wipes® International Conference

More than 450 participants from 18 countries made in-person connections and gained innovative insights into the segment’s future at the World of Wipes® (WOW) International Conference at the Marriott Marquis in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, reported strong attendance and activity at its 16th WOW conference, June 27-30. Highlights included a conference, award presentations, a separate 1.5-day WIPES Academy training course, and a new mentorship program.  

WOW speakers focused on the future of the $17 billion wipes sector amid changing consumer trends, supply chain complexities, sustainable packaging demands, and medical disinfection challenges. Program sessions included Circular and Sustainable Wipes, Supply Chain Challenges, Sustainable Substrates, Disinfection Concerns, Sustainable Packaging Trends, and Flushability Developments.

Tony Fragnito welcomed participants in his new role as INDA President for the first time since succeeding Dave Rousse, now President Emeritus and advisor.

More than 450 participants from 18 countries made in-person connections and gained innovative insights into the segment’s future at the World of Wipes® (WOW) International Conference at the Marriott Marquis in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, reported strong attendance and activity at its 16th WOW conference, June 27-30. Highlights included a conference, award presentations, a separate 1.5-day WIPES Academy training course, and a new mentorship program.  

WOW speakers focused on the future of the $17 billion wipes sector amid changing consumer trends, supply chain complexities, sustainable packaging demands, and medical disinfection challenges. Program sessions included Circular and Sustainable Wipes, Supply Chain Challenges, Sustainable Substrates, Disinfection Concerns, Sustainable Packaging Trends, and Flushability Developments.

Tony Fragnito welcomed participants in his new role as INDA President for the first time since succeeding Dave Rousse, now President Emeritus and advisor.

WOW highlights included the announcement of Nice’ N CLEAN® SecureFLUSH™ Technology Flushable Wipes from Nice-Pak as the winner of this year’s World of Wipes Innovation Award® for their flushable wipes made of 100 percent cellulose nonwoven. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to ensure responsible care of plumbing and wastewater.

Other highlights included the presentation of the 2022 INDA Lifetime Technical Award to Richard Knowlson, Principal, RPK Consulting. The award honors an individual with a long-established nonwovens career that advance technology and the commercial success of the North American nonwovens industry. Knowlson pioneered the use of powder super absorbents in airlaid forming systems creating new period product designs for ultra-thin products. He co-founded Airformed Composites, co-invented the first commercial multi-bonded airlaid products in North America that were used in characters for Sesame Street and served in leadership positions with Rayonier, Ciba/Huntsman and Jacob Holm.

05.07.2022

Stahl: Reduction of Scope 3 upstream emissions by at least 25%

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Scope 3 GHG emissions cover all the additional indirect emissions that can occur in the value chain, including those associated with purchased raw materials, packaging, business travel, and transportation. Stahl’s Scope 3 emissions currently represent over 90% of its carbon footprint.

Source:

Stahl Holdings B.V.