From the Sector

Reset
117 results
(c) Coperion GmbH
24.06.2022

Coperion: New Development for Plastic Fiber and Flake Recycling

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Source:

Coperion GmbH / Konsens Public Relations GmbH & Co. KG

22.06.2022

Avgol® wins Innovation Award at the RIGHT Hygiene conference

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

Source:

Avgol

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) A. Monforts Textilmaschinen GmbH & Co. KG
20.06.2022

Monforts introduces range of modular upgrades

Monforts is introducing a range of modular upgrades that can be added to existing finishing lines already in production.

The Monforts universal Energy Tower – a flexible, free-standing air/air heat exchanger for recovering the heat from the exhaust air flow of thermal processes – can result in a 30% reduction in the energy consumed by a line, depending on the exhaust air volume and operating temperature.

A Monforts Eco Booster, completely integrated into the chamber design of the Montex stenter, is another retrofitting option. As a single state-of-the-art heat recovery system with automatic cleaning, it can be added to existing ranges. For ranges of up to eight chambers only one module is necessary to achieve significant energy savings.

On an eight-chamber stenter with an operating width of two metres carrying out a fixing process on a 150gsm woven fabric, for example, the energy savings have been calculated to be 35% over an annual schedule of 6,000 operating hours.

In addition, the Eco Booster consumes only minimal amounts of water during the cleaning cycle and the entire process is controlled and monitored automatically.

Monforts is introducing a range of modular upgrades that can be added to existing finishing lines already in production.

The Monforts universal Energy Tower – a flexible, free-standing air/air heat exchanger for recovering the heat from the exhaust air flow of thermal processes – can result in a 30% reduction in the energy consumed by a line, depending on the exhaust air volume and operating temperature.

A Monforts Eco Booster, completely integrated into the chamber design of the Montex stenter, is another retrofitting option. As a single state-of-the-art heat recovery system with automatic cleaning, it can be added to existing ranges. For ranges of up to eight chambers only one module is necessary to achieve significant energy savings.

On an eight-chamber stenter with an operating width of two metres carrying out a fixing process on a 150gsm woven fabric, for example, the energy savings have been calculated to be 35% over an annual schedule of 6,000 operating hours.

In addition, the Eco Booster consumes only minimal amounts of water during the cleaning cycle and the entire process is controlled and monitored automatically.

The Matex Eco Applicator is an alternative to the conventional padding process for energy-conscious finishing and achieving considerable savings in the energy required for drying treated fabrics. The precise amount of chemical can be applied to the fabric and with less residual moisture after application of only approximately 35% so that less drying capacity is required in the stenter, which leads to huge energy savings.

Finishes can be evenly applied on either or both sides of the fabric, and two separate treatments can be applied to front and back. This makes the unit ideal for the production of, for example, double-performance hydrophobic/hydrophilic fabrics for professional clothing, as well as the over dyeing or finishing of denim fabrics.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

17.06.2022

Beaulieu Technical Textiles: going green with sustainable geotextiles

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

Construction products, like geotextiles, follow the very comprehensive European standard, EN 15804+A2. The third-party verification and approval by the international EPD® System officially demonstrates the low environmental impact of BTT’s geotextile products.

 

More information:
geotextiles Beaulieu
Source:

Beaulieu

Innova Fabrics chooses ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line (c) ROICA
Responsible RF (Residual Free) line from ROICA™ V550 by Asahi Kasei
18.05.2022

Innova Fabrics chooses ROICA™

  • Responsible RF (Residual Free) line from ROICA™ V550 by Asahi Kasei

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals.

  • Responsible RF (Residual Free) line from ROICA™ V550 by Asahi Kasei

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals.

In the last season, Innova has increased its smart proposition by launching the RF (Residual Free) line, with the aim of reducing the impact of microplastics residues produced by the fashion industry. This is possible thanks to the combination of two responsible ingredients: SENSIL® Biocare by Nilit and ROICA™ V550 by Asahi Kasei.SENSIL® BioCare is the premium, sustainable nylon 6.6 fiber enriched with a special technology that helps reduce the persistence of textile waste in the ocean and landfills by acting during and after the product's life cycle. Therefore, if the microplastics in SENSIL® BioCare garments are released during washing, they will decompose much faster than conventional Nylon 6.6 fibers, reducing textile waste.

ROICA™ V550, part of the ROICA Eco-Smart™ family, is the premium, sustainable stretch yarn that degrades without releasing harmful substances into the environment, according to the Hohenstein's environmental certification. ROICA™ V550 also carries the Gold Level Material Health certificate from the Cradle-to-Cradle Product Innovation Institute, which evaluated the yarn's impact on human and environmental health.

The strong relationship established between Innova Fabrics and ROICA™ by Asahi Kasei is a long-standing one: from the very beginning, the textile company chose ROICA™ as its main reference for premium stretch, using ROICA Colour Perfect™ in most of its articles. Having experienced the innovation of the ROICA™ line dedicated to high-quality color, Innova decided to opt for the ROICA Eco-Smart™ line as part of the extension of its environmentally conscious line.

Source:

GB Network Marketing & Communication

 Innova Fabrics chooses ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line (c) Innova Fabrics
Innova Fabrics Residual Free Line
11.05.2022

Innova Fabrics chooses ROICA

  • ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals. In the last season, Innova has increased its smart proposition by launching the RF (Residual Free) line, with the aim of reducing the impact of microplastics residues produced by the fashion industry. This is possible thanks to the combination of two responsible ingredients: SENSIL® Biocare by Nilit and ROICA™ V550 by Asahi Kasei.

  • ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals. In the last season, Innova has increased its smart proposition by launching the RF (Residual Free) line, with the aim of reducing the impact of microplastics residues produced by the fashion industry. This is possible thanks to the combination of two responsible ingredients: SENSIL® Biocare by Nilit and ROICA™ V550 by Asahi Kasei.

SENSIL® BioCare is the premium, sustainable nylon 6.6 fiber enriched with a special technology that helps reduce the persistence of textile waste in the ocean and landfills by acting during and after the product's life cycle. Therefore, if the microplastics in SENSIL® BioCare garments are released during washing, they will decompose much faster than conventional Nylon 6.6 fibers, reducing textile waste. ROICA™ V550, part of the ROICA Eco-Smart™ family, is the premium, sustainable stretch yarn that degrades without releasing harmful substances into the environment, according to the Hohenstein's environmental certification. ROICA™ V550 also carries the Gold Level Material Health certificate from the Cradle-to-Cradle Product Innovation Institute, which evaluated the yarn's impact on human and environmental health. The strong relationship established between Innova Fabrics and ROICA™ by Asahi Kasei is a long-standing one: from the very beginning, the textile company chose ROICA™ as its main reference for premium stretch, using ROICA Colour Perfect™ in most of its articles. Having experienced the innovation of the ROICA™ line dedicated to high-quality color, Innova decided to opt for the ROICA Eco-Smart™ line as part of the extension of its environmentally conscious line.

Thanks to the constant synergy with its premium partner in innovative and responsible stretch, Innova continues its path towards a textile and fashion industry that respects the planet, without forgetting profit. And this is just the beginning. Innova Fabrics pieces containing SENSIL® BioCare and ROICA™ V550

Source:

C.L.A.S.S.

(c) adidas AG
10.05.2022

adidas and Gucci showcase their collection

Designed by Creative Director Alessandro Michele, adidas x Gucci merges the emblems of the House with those of the iconic sportswear brand. The collection expands on the sartorial streetwear creations that debuted on the runway with a spectrum of sport-inspired pieces, distinguished by the same kaleidoscopic aesthetics of the show.

To present the selection, Alessandro Michele envisioned a series of images inspired by archival catalogs as a cast of characters strikes dynamic poses against brightly colored backdrops alongside sporty props, captured by photographer Carlijn Jacobs.

Designed by Creative Director Alessandro Michele, adidas x Gucci merges the emblems of the House with those of the iconic sportswear brand. The collection expands on the sartorial streetwear creations that debuted on the runway with a spectrum of sport-inspired pieces, distinguished by the same kaleidoscopic aesthetics of the show.

To present the selection, Alessandro Michele envisioned a series of images inspired by archival catalogs as a cast of characters strikes dynamic poses against brightly colored backdrops alongside sporty props, captured by photographer Carlijn Jacobs.

With the heritage of both brands encoded in a trio of lines, a fixation on stripes plays out across ready-to-wear pieces that echo the silhouettes of athletic staples and leisurewear. Track pants feature the white Three Stripes of adidas on one leg, while the other is defined by the red and green Web of Gucci. Energetic prints portray how motifs like the adidas Trefoil and GG monogram find synergy to amplify two legacies. Conventionally formal pieces like leather heels, suede loafers, and silk scarves enter hybridized territory as well, as they are marked with casual codes. Similarly, retro aesthetics become intrinsically contemporary as they proclaim there are no rules when it comes to dressing up.

Reflecting a shared commitment to innovation, progress, sustainability goals and collective action, the collection features multiple pieces crafted with future-conscious material fabrications including polyester, cotton and viscose.

More information:
adidas Gucci Sportswear
Source:

adidas AG

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) Hologenix
22.04.2022

DFND introduces Sleepwear powered by CELLIANT®

DFND, a compression and apparel brand designed for the military, firefighters, first responders and pro athletes, now available to athletes everywhere, has partnered with Hologenix®, creators of CELLIANT® to introduce a line of unisex sleepwear: DFND REST. Designed for the “warrior athlete,” the sleepwear is powered by DFND X CELLIANT®, the trailblazer in bio-responsive infrared textiles.
 
Both DFND and Hologenix are focused on increasing recovery and enhancing performance for the human body, so the partnership couldn’t be more ideal. CELLIANT’s science-backed infrared (IR) technology is a natural blend of bioceramics that allows textiles to capture and convert body heat into infrared energy. DFND REST powered by CELLIANT notes that it is “clinically proven to enhance tissue oxygen levels to help your body be at its best.”

DFND REST powered by CELLIANT includes three unisex designs in two colors each, Tan and Heather Grey: IR Short Sleeve V-Neck Shirt; IR Long Sleeve V-Neck Shirt and IR Sleepwear Long John; and two designs in Black: IR Recover RX Hood; IR Recover RX Jogger.

DFND, a compression and apparel brand designed for the military, firefighters, first responders and pro athletes, now available to athletes everywhere, has partnered with Hologenix®, creators of CELLIANT® to introduce a line of unisex sleepwear: DFND REST. Designed for the “warrior athlete,” the sleepwear is powered by DFND X CELLIANT®, the trailblazer in bio-responsive infrared textiles.
 
Both DFND and Hologenix are focused on increasing recovery and enhancing performance for the human body, so the partnership couldn’t be more ideal. CELLIANT’s science-backed infrared (IR) technology is a natural blend of bioceramics that allows textiles to capture and convert body heat into infrared energy. DFND REST powered by CELLIANT notes that it is “clinically proven to enhance tissue oxygen levels to help your body be at its best.”

DFND REST powered by CELLIANT includes three unisex designs in two colors each, Tan and Heather Grey: IR Short Sleeve V-Neck Shirt; IR Long Sleeve V-Neck Shirt and IR Sleepwear Long John; and two designs in Black: IR Recover RX Hood; IR Recover RX Jogger.

DFND REST, like all DFND products, is designed, tested and made in the USA. CELLIANT’s proprietary mineral formula is processed and manufactured in the USA.

DFND REST will be featured at the following upcoming shows: the Holistic Health and Fitness (H2F) Exposition and Industry Day, April 26 to 27 at Fort Eustis; Warrior West, April 27 to 28 at the San Diego Convention Center; Modern Day Marine, May 10 to 12, Washington, D.C.; The Human Performance & Biosystems Summit, June 29 to 30 at National Harbor, Maryland; National Guard Conference & Exhibition, August 26 to 29, Columbus, Ohio; and AUSA, October 10 to 12, Washington, D.C.

More information:
Celliant DFND sleepwear
Source:

Hologenix / Sarah P. Fletcher Communications 

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

(c) COBRA International
12.04.2022

COBRA International showcases its portfolio for vehicle systems at AUVSI XPONENTIAL 2022

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

At AUVSI XPONENTIAL, Cobra will also illustrate how the company leverages innovation and expertise developed in its water sports and automotive business to enhance its product offering to the UAV sector. Products on display include a Fliteboard electric foiling surfboard, pre-preg hydrofoil parts, lightweight medical prosthetics, flax and forged carbon parts, as well as a full set of visual carbon and painted automotive trims, each demonstrating the company’s high volume production capacity for ultra-light carbon composite structures.

The show will take place from the 25 to 28 April at the Orange County Convention Center, Orlando, Florida.

Source:

COBRA International / 100% Marketing

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.04.2022

Montex stenter at ITM

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

29.03.2022

C.L.A.S.S. SMART VOICES: A Spotlight On Water Saving Solutions

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

"Sensil® BioCare is our solution to reduce the persistence of textile waste in the ocean. We embedded technology in it so that if any microfiber is released in the washing, they will break down faster than conventional nylon. Based on an external study, we have seen an almost 60 percent microplastic reduction in two years"
- Michelle Lea, Vice President Global Marketing at Nilit

"When it comes to our printing processes, almost no water is in use and the waste is minimal. We have never seen this before in this industry. Based on LCA tests, when compared to screen printing our "Atlas Max" printer saves up to 93 percent of water, while the "Presto" printer saves up to 95 percent of water".
- Michal Arbel, Sustainability Communication Lead at Kornit Digital

"One of the most important projects of the company is Upcycling the Oceans, with the aim of tackling the marine litter in collaboration with the fishing sector. Last year, we collected 300 tons of litter from the seabed, and we promoted circular economy by transforming the waste in products."
- Irene Diez, Director at Ecoalf Foundation

Intertextile and Yarn Expo spring show dates to be adjusted
Intertextile and Yarn Expo spring show dates to be adjusted
23.03.2022

Intertextile and Yarn Expo spring show dates to be adjusted

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 
Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained the decision: “In view of recent outbreaks in multiple provinces and cities in China, and to support the government’s pandemic control measures, the organisers of the fairs have decided to adjust the three spring shows by combining the Spring and Autumn Editions of Intertextile Apparel and Yarn Expo, and holding these concurrently with the Spring Edition of Intertextile Home. The decision is necessary to reduce the risk of transmission and to ensure the welfare of all our participants. We will keep in close communication with all parties involved and we look forward to providing an effective sourcing platform for the textile industry when it is safe to do so. As we continue to adapt during these challenging times, we’d like to express our thanks to all participants for their unwavering understanding and support.”
 
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). 

Source:

Messe Frankfurt (HK) Ltd

Archroma Launches Nylosan® (a) Archroma
Archroma launches long-awaited metal-free* and halogen-free* Nylosan® S navy and black colors for sportswear.
23.03.2022

Archroma Launches Nylosan®

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • First, the Nylosan® S range offers metal-free* alternatives to dyestuff generally used to dye polyamide and nylon and which usually contain metals. The new Nylosan® Navy S-3R and Black S-3N are taking the industry standard one step further by offering a halogen-free* option to those manufacturers, brands and retailers who are looking to offer the safest grade available.
  • Second, the Nylosan® S range now comprises a wide gamut of colors, with these new dyes targeting the color matching and fastness specifications of the iconic blacks and navies of major sportswear brands. In order to support this color matching process, Archroma makes available the colorimetric dye primaries for the mills in order to (re)match the color standards.
  • Third, the new navy and black dyes display the same color constancy as the dyes used in many leading color standards, which means the navy and black colors created with Nylosan® S range will be non-metameric to the color standard under multiple light sources, whether artificial or natural, indoor or outdoor.
  • And fourth, the introduction of the new Nylosan® Black S-3N makes dyeing a metal-free* black on polyamide finally possible – something that was not available before.

Both dyes display the other usual features allowed of the Nylosan® S range, i.e., high fastness and buildup, and a wide shading gamut for industry-leading metal-free* acid dyes. They are REACH registered and bluesign® approved.

In addition, with the new Nylosan® Navy S-3R and Black S-3N at the core of its new CONSCIOUSLY DEEP system, Archroma is offering another very welcome benefit in the production of polyamide articles: resource saving. As most sportswear manufacturers and brands know, creating durable dark colors on nylon is a complex process that uses massive amounts of water and energy. Archroma therefore designed the new CONSCIOUSLY DEEP system to allow a highly efficient scour dyeing process reduced from 6 to 2 baths. This results into reducing the process time by up to 36%, water consumption by up to 64%, energy by up to 46%, and CO2 emissions by up to 41% compared to conventional benchmark process.

Source:

EMG

ANDRITZ at JEC World 2022 (c) ANDRITZ AG
16.03.2022

ANDRITZ at JEC World 2022

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

More information:
Andritz JEC World needlepunch
Source:

ANDRITZ AG