From the Sector

Reset
88 results
© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

(c) Messe Frankfurt (HK) Ltd.
14.06.2022

Intertextile Shanghai Home Textiles unveils three trend themes for 2023

This year, Intertextile Shanghai Home Textiles again joins forces with NellyRodi™, the renowned French agency for international forecasting, to present the design theme for 2023 – ‘ALIVE’ – together with three trends: HUMAN CAPITAL, ROUSING COMMITMENT and UNREAL REALITIES.

Nature is a keyword in HUMAN CAPITAL
This direction reflects how people want to reconnect with the environment by choosing a local approach, short supply chains, raw and natural materials, and traditional techniques. For instance, 100% plant-based materials, as well as metalised fringed jacquards and gold yarns are used to illustrate this concept.

Inspired by everyday basics and daily essentials, the trend uses a soft, luminous white palette mingled with muted and amber shades of vegetal dyes. Designs also incorporate figurative hand-drawings, archaic bestiary, stylised wildflowers and geometric patterns.

This year, Intertextile Shanghai Home Textiles again joins forces with NellyRodi™, the renowned French agency for international forecasting, to present the design theme for 2023 – ‘ALIVE’ – together with three trends: HUMAN CAPITAL, ROUSING COMMITMENT and UNREAL REALITIES.

Nature is a keyword in HUMAN CAPITAL
This direction reflects how people want to reconnect with the environment by choosing a local approach, short supply chains, raw and natural materials, and traditional techniques. For instance, 100% plant-based materials, as well as metalised fringed jacquards and gold yarns are used to illustrate this concept.

Inspired by everyday basics and daily essentials, the trend uses a soft, luminous white palette mingled with muted and amber shades of vegetal dyes. Designs also incorporate figurative hand-drawings, archaic bestiary, stylised wildflowers and geometric patterns.

ROUSING COMMITMENT celebrates creative self-expression
The trend combines a lively play of mix-matching patterns and colours. This embraces the integration of neutral shades through touches of metallic silver and fluorescent colours to represent the urban life.

Foamback and other fabrics influenced by sports materials, as well as extravagant jacquards, silicon embossing and bouclé fabrics draw out feel-good factor of the theme. Prints using modern twists on traditional patterns, lettering plays, exuberant florals and bold geometrics, also deliver the desire to live freely by sharing joy and happiness with others.

The fantasy of UNREAL REALITIES
In order to push the limits of imagination, science and technology, consumers tap into digital realms to connect with other realities, augmented worlds and futurist utopias that draw out the potential of today’s technology. Metalised rainbow colours highlight the magic and wonder under this virtual reality theme, while surrealistic photoprint shapes, misty landscapes, blurry effects and fantastical nature adds a futuristic touch.

The theme adopts iridescent gleam of semi-transparent voiles, muslins, recycled synthetics and added pearly or glazed aspects. Soft, light meshes, honeycombed or blistered surfaces and cloudy seersuckers elevate the textures in the fabrics.

The trends are decided by a committee led by the NellyRodi™ Agency (France) and formed by top forecasters including Mr Vincent Grégoire (France), the agency’s Consumer Trends and Insights Director; Mr Shen Lei (China), Founder and Chief of Interior Architects Design; and Ms Tracy Jen (Taiwan, China), the Host of ‘Eremito’; as well as Ms Sakina M’sa, the beloved French fashion designer and entrepreneur.

In order to integrate exhibitor and industry resources more effectively, the organisers of Intertextile Shanghai Home Textiles have announced that the Spring and Autumn editions will be merged this year. The two fairs will now be held concurrently from 15 – 17 August 2022 at the National Exhibition and Convention Center.

Source:

Messe Frankfurt (HK) Ltd.

Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

22.04.2022

CHIC Spring 2022 postponed again

  • Autumn edition from Aug. 29-31, 2022, in Shanghai

Scheduled to take place in Nanjing in May, CHIC Spring requires another postponement due to the pandemic development of Covid19 in China. Organizers are focusing on the autumn edition of CHIC in Shanghai. From Aug. 29-31, the latest trends in the Chinese consumer market will be on display at the National Exhibition and Convention Center.

The trade fair concept is being revised for the autumn edition, which is expected to attract around 900 exhibitors. Ahead of the show, the CHIC LIVESTREAMING format will provide information on relevant topics during talks with industry experts on social media. The CHIC LIST OF THE BEST section of the trade show will also be launched. Based on industry research, it will showcase best practices and particularly successful brands in the areas of research and design, cultural values, technical innovation, best selling, etc.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions sponsored by China National Garment Association, China World Trade Center and SubCouncil of Textile Industry (CCPIT).

  • Autumn edition from Aug. 29-31, 2022, in Shanghai

Scheduled to take place in Nanjing in May, CHIC Spring requires another postponement due to the pandemic development of Covid19 in China. Organizers are focusing on the autumn edition of CHIC in Shanghai. From Aug. 29-31, the latest trends in the Chinese consumer market will be on display at the National Exhibition and Convention Center.

The trade fair concept is being revised for the autumn edition, which is expected to attract around 900 exhibitors. Ahead of the show, the CHIC LIVESTREAMING format will provide information on relevant topics during talks with industry experts on social media. The CHIC LIST OF THE BEST section of the trade show will also be launched. Based on industry research, it will showcase best practices and particularly successful brands in the areas of research and design, cultural values, technical innovation, best selling, etc.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions sponsored by China National Garment Association, China World Trade Center and SubCouncil of Textile Industry (CCPIT).

More information:
CHIC Fair CHIC Shanghai
Source:

JANDALI

(c) COBRA International
12.04.2022

COBRA International showcases its portfolio for vehicle systems at AUVSI XPONENTIAL 2022

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

At AUVSI XPONENTIAL, Cobra will also illustrate how the company leverages innovation and expertise developed in its water sports and automotive business to enhance its product offering to the UAV sector. Products on display include a Fliteboard electric foiling surfboard, pre-preg hydrofoil parts, lightweight medical prosthetics, flax and forged carbon parts, as well as a full set of visual carbon and painted automotive trims, each demonstrating the company’s high volume production capacity for ultra-light carbon composite structures.

The show will take place from the 25 to 28 April at the Orange County Convention Center, Orlando, Florida.

Source:

COBRA International / 100% Marketing

(c) 2022, SSM
07.04.2022

Swiss Textile Machinery members at Techtextil

High-performance yarns now offer almost unlimited possibilities for replacing traditional raw materials in a vast range of technical applications. Often tailor-made, these filament yarns go way beyond the conventional idea of ‘textiles’ – finding new uses in sectors such as automotive, aviation, maritime, medical and construction, among many others.

Technical textiles are everywhere in our daily lives today, even if we may not always realize it. Some are in more obviously textile products, from sewing threads to artificial turf. But then, take cars as an example: modern vehicles are stuffed with parts made from sophisticated yarns. It’s common for producers of automotive parts now to send template material and requirement lists to Swiss Textile Machinery members, trusting their expertise and experience. Members operate development and testing centers with latest machine installations, where their experts devise customized solutions, as well as calling on the pure innovative spirit which is part of their DNA.

High-performance yarns now offer almost unlimited possibilities for replacing traditional raw materials in a vast range of technical applications. Often tailor-made, these filament yarns go way beyond the conventional idea of ‘textiles’ – finding new uses in sectors such as automotive, aviation, maritime, medical and construction, among many others.

Technical textiles are everywhere in our daily lives today, even if we may not always realize it. Some are in more obviously textile products, from sewing threads to artificial turf. But then, take cars as an example: modern vehicles are stuffed with parts made from sophisticated yarns. It’s common for producers of automotive parts now to send template material and requirement lists to Swiss Textile Machinery members, trusting their expertise and experience. Members operate development and testing centers with latest machine installations, where their experts devise customized solutions, as well as calling on the pure innovative spirit which is part of their DNA.

At the extremes
Technology drives applications beyond our current imagining in the case of Heberlein air splicers. Developed for a wide range of uses with high-strength technical fibers, they have no problems splicing aramid fibers up to 16’100 dtex, carbon up to 30’000 dtex, Dyneema up to 5’500 dtex, and glass up to 4’800 tex. Using compressed air, the splicers produce a tear-resistant, homogeneous splice of material without interfering knots.

Retech has the technology to achieve specifications for filament yarns, drawing and stretching fibers to perfection. Top heated godet rolls – many customized – are developed for high-performance fibers. Temperatures up to 400 °C can be achieved. Combining the right settings and wide speed ranges for each specific process results in unique end-products.

Fabric producers of high-end applications must avoid any quality risk. Yarn producers are well aware of this responsibility, so they use precision package winders for technical yarns, developed by Rieter’s subsidiary SSM. Taking yarns from ring twisting bobbins, its specialist finish winders can produce coarse-count technical yarns up to 50’000 dtex, offering a new level of flexibility and winding quality.

Lifestyle essentials
At first glance, motorists might fail to notice many of the technical yarns ‘hidden’ inside their cars. These products have functions such as providing stability with hardly any weight, or absorbing tensile forces at defined elongation. This kind of controlled elongation behaviour, for example, arises from the choice of textile material and the special construction of the yarns used.

Such specifications make twisting and cabling machines essential for the automotive industry. Saurer offers machines for the production of technical yarns made from a variety of feed materials in a very wide yarn count range. They are needed for vehicle products such as tire carcasses, toothed engine belts, seat belts, airbags and lorry tarpaulins.

Technical yarns also play a surprising role in our mobile devices. Tapping, scrolling and swiping are second nature for billions, with our phones and a plethora of other lifestyle essentials. Yet, how many people would know that the touch-sensitivity we take for granted on these screens is largely made possible by twisted glass fibers. Bräcker, part of Rieter’s components business, offers a selection of vertical sinter metal rings and nylon travelers for glass fiber twisting, so that mills can achieve high levels of productivity and quality.

Future unlimited
Automotive and communication technology are already important industries for Swiss Textile Machinery members, along with well-known technical textiles markets in sectors such as medical, transport and construction. Smart-wear is already noted as a field with significant potential. Naturally, members are constantly investigating other possibilities. Swiss textile machinery is already applied in energy (batteries), and plastics.

The Swiss Textile Machinery Pavilion will be at the Techtextil exhibition in Frankfurt, Germany, taking place from 21 to 24 June 2022.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.04.2022

Montex stenter at ITM

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

Intertextile and Yarn Expo spring show dates to be adjusted
Intertextile and Yarn Expo spring show dates to be adjusted
23.03.2022

Intertextile and Yarn Expo spring show dates to be adjusted

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 
Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained the decision: “In view of recent outbreaks in multiple provinces and cities in China, and to support the government’s pandemic control measures, the organisers of the fairs have decided to adjust the three spring shows by combining the Spring and Autumn Editions of Intertextile Apparel and Yarn Expo, and holding these concurrently with the Spring Edition of Intertextile Home. The decision is necessary to reduce the risk of transmission and to ensure the welfare of all our participants. We will keep in close communication with all parties involved and we look forward to providing an effective sourcing platform for the textile industry when it is safe to do so. As we continue to adapt during these challenging times, we’d like to express our thanks to all participants for their unwavering understanding and support.”
 
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). 

Source:

Messe Frankfurt (HK) Ltd

ANDRITZ at JEC World 2022 (c) ANDRITZ AG
16.03.2022

ANDRITZ at JEC World 2022

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

More information:
Andritz JEC World needlepunch
Source:

ANDRITZ AG

14.03.2022

IDEA®22 with a Vital World View of Nonwovens

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Overview and Green Innovation Development of China’s Nonwovens Industry,  by Guimei Li, Vice President, China Nonwovens and Industrial Textiles Association (CNITA) on March 29
  • South America – Land of Opportunity or Land of Turbulence? The Recent History and Trends That Are Shaping the South American Nonwovens Market, presented by Mariana Mynarski, Corporate Marketing Manager, Fitesa on March 29
  • Asian Nonwovens Production and Market Update by Chan-Hyou Park, Chairman, Asia Nonwoven Fabrics Association (ANFA) on March 30
  • Understanding the State of the North American Nonwovens Industry and a Market Gone Mad presented by Brad Kalil, INDA Director of Market Intelligence and Economic Insights on March 31
  • An Overview of Key Issues Facing Nonwovens on Top of European Market Trends presented by Pierre Wiertz, General Manager, EDANA on March 31

IDEA® Award Presentations
Another conference highlight will be the presentation of the IDEA® 2022 Achievement Awards in partnership with Nonwovens Industry magazine, based on the results of online voting in six categories as well as the announcement of the first Sustainability Advancement Award on March 30.

IDEA® – the World’s Preeminent Event for the Nonwovens & Engineered Fabrics Industry – will feature several hundred exhibitors from a myriad of industry sectors and is expected to once again draw an audience of several thousand senior-level buyers and attendees from over 60 countries to the Miami Beach Convention Center. A welcome reception will be held to officially kick off the event on March 28.

IDEA®22 Essentials of Nonwovens Training Courses
Product developers, marketing managers, technical sales, support and other professionals can expand their industry-focused knowledge by attending the IDEA®22 Essentials of Nonwovens Training Courses.

This vital training program will provide an immersive dive into the latest nonwoven technologies, industry segments and more with courses on absorbent hygiene cores, making nonwovens, industrial wipes and consumer wipes.

A must-attend educational session on patent searching on March 31 will cover the latest major changes in patent searches on the United States Patent and Trademark Office (USPTO) website that has been updated to enhance user experience. 

More information:
IDEA IDEA® Achievement Award
Source:

IDEA

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles
09.03.2022

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

As an upswing from the growing public awareness of environmental issues, consumers are now more willing to switch to sustainable products. According to a CottonWorks’ survey, 90% of the interviewed Chinese consumers want their home textiles to be environmentally friendly[1]. It also found that more consumers are paying attention to the fibre content that can deliver safe and sustainable home textiles.
Furthermore, the Chinese government’s ‘Outline Of the Development of the Textile Industry during the 14th Five Year Plan’, also encourages the acceleration of low cost, functional and sustainable renewable fibres in the local textile industry.

The Lenzing satellite pavilion: a one-stop platform for green home textile materials
To help home textile suppliers source a variety of eco-friendly materials efficiently, one of the fair’s long-time exhibitors is set to form a new pavilion at the upcoming Spring show. Lenzing, the Austrian brand widely known for its ecologically responsible production of specialty fibres made from renewable raw material wood, gathers seven of its local downstream supply chain manufacturers to showcase their renewable products.

Mr David Dai, Senior Commercial Director Textile China of Lenzing spoked about why they decided to organise a new pavilion at the show: “As we received positive feedback from our pavilion at Intertextile Shanghai Apparel Fabrics, our business partners from the home textile supply chain were hoping for a similar arrangement in this sector. We believe all the participating manufacturers can benefit from this pavilion by finding ways to better serve their clients and consumers.”

Brands in the Lenzing satellite pavilion will include:
•    Lenzing Group will introduce the first Carbon-zero TENCEL™ fibres which are CarbonNeutral™ certified products by Natural Capital Partner.
•    Botou Jinglun Textiles Co Ltd focuses on new fibre yarns. The company develops multi-component yarns for cotton, wool, silk and linen with combinations of MODAL, TENCEL™ fibres and various functional materials.
•    Fujian Yongtai County Huaerjin Textile Co Ltd provides high-quality, natural, renewable pure and blended yarns including TENCEL™ fibres, US cotton, Australian cotton, acrylic cotton, silk and other plant-based yarns.
•    Jiangsu Dasheng Group Co Ltd has one of the largest cellulosic fibre yarn spinning mills in China and focuses on producing top-quality home textiles.
•    Qingdao Textiles Group produces natural fibres, cellulose fibres, copper antimicrobial fibres and other nature-based materials for home and contract textiles.
•    Suzhou Zhenlun Spinning Co Ltd is an advanced enterprise specialising in regenerated cellulose yarns like ECO VERO, FSC Viscose, Circulose, Carbon Zero Yarn and more.
•    Ton Design Industrial Co Ltd produces medium and high-end bedding fabrics. The brand’s TENCEL™ Lyocell fibres and TENCEL™ fibres blend cotton series products are certified by Lenzing.
•    Wuxi Tianmu Extra Width Printing Dyeing Co Ltd mainly produces extra-wide, high-count and high-density down-proof fabrics and fabrics for bedding. The technique can handle different procedures for dealing with pure cotton, bamboo fibres, TENCEL™ fibres and other fibre fabrics.

In addition to the new pavilion, a number of other featured exhibitors will also showcase their sustainable products at the fair. This includes Cotton Council International (CCI) promoting US cotton fibres and cotton products, and Zhangjiagang Coolist Life Technology Co Ltd bringing their unique bedding products made from organic and environmental-friendly materials.

(c) Groz-Beckert KG
04.03.2022

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA Miami

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

At IDEA, the Groz-Beckert InLine card clothing series is the main focus of the product group Carding. Thanks to a new and patented production method, Groz-Beckert has developed a new range of metallic card clothing, which offers improved process reliability and increased up-time of the card for the nonwovens industry. At the same time, the new production method also reflects the corporate principles of environmentally-friendly and resource-saving production.

The card clothings are characterized by a controlled and very precise hardening of the teeth, a reduced rib height of 1.3 millimeters and  completely scale-free surfaces without burrs. An exhibit at the booth will highlight how this differs from conventional production methods. It shows an impressive comparison between the new Groz-Beckert InLine card clothing and the previous generation.

The SiroLock™ plus worker and doffer wire was developed as the first special geometry of the Groz-Beckert InLine card clothing series. In addition to the advantages of the Groz-Beckert InLine card clothings, the SiroLock™ plus impresses with a more effective fiber take-up, control and transfer. The functionality and operating principle behind the SiroLock™ plus can be experienced by IDEA visitors via Augmented Reality.

Source:

Groz-Beckert KG

IDEA
28.02.2022

Online Voting Opens for “Best of the Best” IDEA® Achievement Awards

  • Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event.  

  • Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event.  

All of the winners will be announced on March 30 at a ceremony at IDEA® from 9:30 a.m. to 10:30 a.m. moderated by Dave Rousse, President, INDA and Karen, McIntyre, Editor, Nonwovens Industry.

The INDA Technical Advisory Board, consisting of technical professionals from member companies, has narrowed the competition from more than 100 online nominations to the following 18 finalists selected for their leading innovations since the last IDEA show in 2019.

The industry will have the chance to select their top choices from the three finalists in each of the following six categories through the online voting process:

IDEA® Equipment Achievement Award

  • ESC-8 – Curt G. Joa, Inc.
    Imagine endless combinations of insert and chassis designs for adult incontinence production at the push of a button. With patent-pending ESC-8™ Electronic Size Change Technology, JOA has addressed the need for automated product size change. The release of this industry-leading, first-of-a-kind technology gives customers the flexibility to configure endless insert and chassis combinations while maintaining higher production speeds and minimizing raw material usage. The ESC-8™ can be integrated into new and existing machines.
     
  • Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
    Elastics are an integral component to many hygiene products. Imagine a diaper or incontinence product that is reliable, adhesive-free and extremely soft. Herrmann Ultrasonics Elastic Thread Anchoring (ETA) Sonotrode technology provides just that, in an industry first, easy-to-use closed-loop feedback manufacturing solution. The fixation of the elastic threads is accomplished with ultrasonic energy that offers a wide process window, without the need for tool changeovers, at processing speeds above 2,000 ft./min.
     
  • Doffer Airlay Card – Technoplants SRL
    With airlaying suction and a doffing system like traditional roller cards, the Doffer Airlay Card makes it possible to produce carded webs with doffer in thicknesses from 10 to 1.500 gsm. With top and bottom suction, it can produce a partly carded and partly airlaid web. This card can comb, separate and make parallel all types of natural, synthetic and regenerated fibers for applications including hygiene, filtration, medical and gradient acquisition distribution layer (ADL).

IDEA® Raw Material Achievement Award

  • sero™ premium hemp fiber – Bast Fibre Technologies Inc.
    sero™ 100 percent premium hemp fibers are the result of years of the company’s top-to-bottom supply chain experience. BFT’s proprietary processing technology is employed to carefully clean, individualize, and soften bast fibers that meet stringent nonwoven technical standards and are plastic-free, tree-free, and compostable. sero™ fibers are a plug-and-play replacement for plastic fibers that run seamlessly on major nonwoven platforms without compromising production speeds, efficiency, or uniformity.
     
  • ODOGard – Rem Brands, Inc.
    Rem Brands, Inc.’s patented ODOGard® technology is a revolutionary advancement in odor elimination. This next-generation odor elimination mechanism works by covalent molecular bonding to malodors. Malodors are permanently attached to the ODOGard® molecule, changing them into non-odorous molecules forever. ODOGard® can be impregnated into pulp fluff and other kinds of media. Whether  malodors come from the air or from hygiene products, ODOGard® has it covered.
     
  • SharoWIPES™ – Sharon Laboratories
    SharoWIPES™ by Sharon Laboratories, Israel, is a technological breakthrough from in-depth scientific research addressing industry needs for more “clean label, non-irritating, eco-friendly” consumer wet wipes. With their unique anti-biofilm mechanism, SharoWIPES™ offer dual protection from microbial contamination of both the wet wipe formula, as well as the non-woven fabric. SharoWIPES™ preservation systems deliver broad-spectrum protection at low levels contributing to wet wipe brand equity with free from, microbiome friendly, vegan and biodegradable claims.
     

IDEA® Short-Life Product Achievement Award

  • MDP™ – Dermasteel, Ltd.
    MDP™ presents a breakthrough approach to restoring the quality of life for men experiencing bladder leakage. MDP™ is a revolutionary nonwoven product for men coping with light urinary incontinence that is invisibly discreet, effective, comfortable, and reliable. It features Body ID Technology™ for customized adjustment, variable elasticity strapping, self-reflexive side panels for unimpeded breathability, form-fitting to the unique characteristics of each man’s anatomy, and the smallest carbon footprint of any comparable male incontinence option.
     
  • Organic 2.0 – Ellepot A/S
    In young plant propagation, plastic products are used in large quantities. Ellepot’s new paper is a game-changer supporting plastic exit strategies. During six years in development, Ellepot and Ahlstrom-Munksjö partnered with OrganoClick, the developer of special binders using organocatalysis, a field of chemistry awarded the Nobel Prize in 2021. The product is approved for organic crops in Germany, the UK, Denmark, The Netherlands, Sweden and Canada and certified okay home compostable and biodegradable in soil.
     
  • LifeSavers Wipes – LifeSavers LLC
    LifeSavers Wipes are personal hygiene wipes that change color if they detect abnormal health indicators in the urine. The launch product is a diabetic wipe, which will change color if there are abnormal levels of glucose in the urine. The wipes are therefore triple purposed as they assist with personal hygiene after urinating, act as an early warning system, and serve as an instant glucose monitor. UTI and kidney disease wipes are next in line.
     

IDEA® Long-Life Product Achievement Award

  • Canopy Hero Pro – Canopy
    Today’s reusable respirators are uncomfortable, limit communication, and can lose effectiveness after cleaning. Disposable options pose similar issues and generate waste. Canopy® has created a next-generation, reusable respirator for healthcare workers that’s comfortable, easy to clean, exceeds federal safety standards, has a transparent front to allow for improved communication, costs less than disposables, and can help save 7,200 tons of waste daily. Its patented, transparent, fully mechanical filter helps protect those who protect us.
     
  • Long-Life Cellulose-based Nonwovens for Higher Performance in Reusable Baby Diapers – Kelheim Fibres GmbH and Sumo Diapers
    Innovation exemplified: the trend-setting Sumo Baby Cloth Diaper shows how needle-punched/thermobonded nonwovens find their way into reusable diapers, thanks to Kelheim Fibres’ specialty viscose fibers with adjusted cross-sections (trilobal and hollow). This technology pushes liquid management capabilities and the absorbency of washable hygiene products to new levels, creating a unique duality of high-performance and high-sustainability credentials, and opening up new fields of application.
     
  • Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
    MANN+HUMMEL has developed a hybrid media by combining electret-based spunbond and a pure mechanical filtration layer of ultrafine polymer fibers. The result: an outstanding separation of PM1 particles up to 95 percent, according to DIN EN ISO 16890. This technology enables stable filtration performance and long-term efficiency over the whole filter lifetime. The nanofiber layer can be combined with any cabin air filter media of the MANN+HUMMEL range, improving air quality in a vehicle’s cabin significantly.
     

IDEA® Sustainability Advancement Award

  • Pureflow8 – In Flight Material Separator – Diaper Recycling Technology Pte. Ltd.
    New bolt-on additions to the company’s Generation 8 recycling platform guarantee increased performance in terms of material purity and work efficiency. While recovering up to 87 percent of diaper waste raw material’s financial investment, DRT pushes the boundaries further to meet sustainability targets and include active pulp scanning, fluidizing SAP re-gen technology, and gravimetric pulp refeed processes. DRT recognizes its teams and suppliers who have worked tremendously hard to complete this major milestone.
     
  • Fitesa® 100 Percent BioBased Bico – Fitesa
    Fitesa® S Bico 100 percent BioBased PE/PLA is a technically sophisticated plant-sourced nonwoven that has been successfully applied in innovative baby diapers as topsheet, backsheet, and front ear components to deliver classic spunbond strength with good abrasion resistance and converting performance. It is responsibly sourced, PE soft, and sustainable, leaving a negative carbon footprint by reducing environmental CO2. It represents the next generation of hygienic nonwovens designed to make work easier and life better.
     
  • Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
    Finally, an alternative to metal and plastic screw caps! Blue Ocean Closures partnered with Glatfelter and ALPLA to accelerate and produce sustainable and environmentally-friendly packaging solutions. The companies optimized their use of renewable and recyclable wood fibers and airlaid materials by creating paper-based screw caps that are durable, strong, and water-resistant. The method of proprietary vacuum press forming allows for low production cost and high scalability.
     

IDEA® Nonwoven Product Achievement Award

  • Sontara® Silk – Glatfelter Corp.
    Sontara® Silk perfectly fits facial contour, is luxurious on the skin, and has a minimal environmental impact. When infused with lotion, these masks have enhanced elasticity, conform closely to the skin, and have excellent adhesion. Sontara® Silk has superior translucency and ensures even penetration of active ingredients onto the skin. Sontara® Silk fabric is manufactured with premium fibers derived from natural raw material. These sustainable materials allow the product to be biodegradable and compostable.
     
  • HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
    Suominen’s latest moist tissue product, HYDRASPUN® Aquaflo achieves dry tissue dispersibility through a proprietary blend of 100 percent sustainable cellulosic materials, minimizing environmental impact. This flushable nonwoven has a premium hand feel for a luxurious consumer experience. In addition, it passes dispersibility standards set by INDA (GD4) and the International Water Services Flushability Group (IWSFG.) HYDRASPUN® Aquaflo is produced in Europe and North America and represents multi-year development and market insights to deliver a personal care product ideal for today’s consumer.
     
  • LS SAF™ Nonwoven Fabrics –Technical Absorbents
    Technical Absorbents developed a new grade of Low Shrink (LS) superabsorbent fiber (SAFTM) for use within a new range of nonwovens that are more resistant to shrinkage. The new LS SAFTM fiber and resulting fabrics were developed in response to demand from the medical industry for a superabsorbent nonwoven suitable for use in advanced wound pad dressings. The new fiber was engineered to be capable of withstanding the moisture used in the EtO sterilization process.

Moving forward after this year, the IDEA® Achievement Award will be presented every two years under the new cycle announced for the event with the subsequent IDEA® taking place April 23-25, 2024.

(c) INDA
25.02.2022

INDA moves IDEA® to a two-year cycle and FiltXPO™ to every 18 months

INDA, the Association of the Nonwoven Fabrics Industry, announces that IDEA® – an event for the Nonwovens & Engineered Fabrics Industry – will be held every two years instead of three starting in 2024.

The upcoming dates for IDEA® under the new schedule will be March 28-31, 2022, as currently scheduled, and then April 23-25, 2024. Both will be held as live, in-person events at the Miami Beach Convention Center in Florida.

“INDA has three key reasons for making this change in event frequency,” said Dave Rousse, INDA President.  “First, the nonwovens industry has been a vibrant, innovative sector with new products, processes and materials every year, so providing an opportunity to showcase more frequently these new developments better serves the industry. Second, one of the major nonwoven events in Asia has declared they will run each and every year, impacting the past three-year cycle of major shows in the nonwovens industry. Third, coming out of the Covid pandemic, market research predicts for the near future that regional events are expected to be better supported than global events.”

INDA, the Association of the Nonwoven Fabrics Industry, announces that IDEA® – an event for the Nonwovens & Engineered Fabrics Industry – will be held every two years instead of three starting in 2024.

The upcoming dates for IDEA® under the new schedule will be March 28-31, 2022, as currently scheduled, and then April 23-25, 2024. Both will be held as live, in-person events at the Miami Beach Convention Center in Florida.

“INDA has three key reasons for making this change in event frequency,” said Dave Rousse, INDA President.  “First, the nonwovens industry has been a vibrant, innovative sector with new products, processes and materials every year, so providing an opportunity to showcase more frequently these new developments better serves the industry. Second, one of the major nonwoven events in Asia has declared they will run each and every year, impacting the past three-year cycle of major shows in the nonwovens industry. Third, coming out of the Covid pandemic, market research predicts for the near future that regional events are expected to be better supported than global events.”

The last time IDEA® was held in 2019 it broke all attendance records. INDA expects the 2022 edition March 28-31 to attract several thousand senior-level buyers and attendees from over 60 countries and several hundred exhibitors from a myriad of industry sectors, including absorbent hygiene, wipes, filtration, medical and surgical products, personal protective equipment, home and office furnishings, transportation, geosynthetics and building construction.

More information:
INDA IDEA Filtxpo nonwovens
Source:

INDA

(c) DiloGroup
23.02.2022

DiloGroup at IDEA 2022

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 
DiloSpinnbau has a new “Unifeed” card feeder (VRS-P) which combines the principle of volumetric charged feeding with the characteristics of a chute feeder but without the conventional overhead trunk which allows for lower ceiling height requirement. The fibre flock matt is condensed by a vacuum delivery apron to give better uniformity of mass distribution. The distribution over the working width is controlled by additional flaps. This feeder can be adapted for medium/fine, coarse/medium or long staple fibres.
 
The “VectorQuadroCard” by DiloSpinnbau incorporates a modular transfer group between breast and main section. The quick change facility of this roller group provides different carding options. The delivery system is also flexible to provide parallel laid, random or condensed web. The preopener section on this card has 4 worker/stripper pairs with five pairs on the main cylinder. Emphasis is on high throughput with good web quality.
 
The revised HyperLayer NT offered by DiloMachines presents the latest state-of-the-art highspeed precision layering technique setting new standards which play an important role especially in hydroentanglement lines. In this application, it is important to achieve layering speeds up to 190 m/minute using sophisticated viscose fibres and a layering width of about 4 m while at the same time having a high layering precision in cross and longitudinal direction.  
 
DiloMachines will also present its portfolio to improve quality and reduce costs. The FutureLine study “3D-Lofter” – first presented at ITMA 2019 in Barcelona – is part of this programme. In this study individual web forming units can deposit fibre masses on freely programmable spots in longitudinal and cross direction thus saving overall fibre mass in applications such as deep moulded parts for the automotive interior. This ability reduces costs in production and operation. The “IsoFeed” concept for a more even flock mat for direct cards and aerodynamic web forming is another interesting field of web mat quality improvement.

More information:
IDEA DiloGroup nonwovens machinery
Source:

DiloGroup

(c) SHIMA SEIKI MFG., LTD
25.01.2022

SHIMA SEIKI to exhibit at Pitti Filati with flat knitting machine

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.

Source:

SHIMA SEIKI MFG., LTD