From the Sector

Reset
282 results
Beaulieu International Group
24.03.2022

Beaulieu Fibres International at IDEA®22

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

Bio-based fibres
From June 2022, Beaulieu Fibres International will offer ISCC+ certification on mono-PP and BICO PP/PE fibres. The fibres will be offered in 1,3-8,9 dtex and will be available with all the main available finish classes (ie. hydrophilic, hydrophobic, etc.) suitable for the main carding and consolidation technologies. These drop-in solutions with no loss in quality will support customers looking to reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications. The bio-based fibres enable customers to contribute to the transition towards a circular economy.

Achieving material savings
For customers in industrial segments like geotextiles, high-tenacity HT8 staple fibres enable customers to achieve nonwovens for construction projects with high mechanical performance but with 15% less weight. The durability of the fibres means that customers can use less raw material for a longer service lifetime, supporting more sustainable design in addition to resource reduction.
For hygiene nonwovens, the Meralux fibres provide significant sustainable design advantages. Meralux fibres deliver substantial sustainability benefits including around 55% savings in raw materials, with equivalent carbon emission savings. These emission savings are thanks to weight reduction in nonwovens with the same coverage level and also the higher recyclability of PP/PE compared to BICO materials.

Source:

Beaulieu International Group

International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line. © ANDRITZ
ANDRITZ crosslapper PRO 25-90
02.03.2022

ANDRITZ- a new batt forming line for Romatex

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

This will be the third line supplied by ANDRITZ to Romatex in four years. Helmut Höck, General Manager Operations at Romatex, says: “We bought our first line from ANDRITZ in 2017, then another one in 2019. We have been very satisfied with the close collaboration between our companies, the flexibility and reliability of the machines, as well as the excellent service from ANDRITZ over all these years. The experience has been uncomplicated. This has given us the confidence to consider ANDRITZ for a further investment.”

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, including batt forming equipment for the stitchbonding processes used to make Maliwatt, Malivlies and Multiknit. This segment addresses a variety of applications, including automotive, household, bedding, footwear, wipes, and many others.

Romatex is the leader in Maliwatt stitchbonding in Africa. Its facility is located in Cape Town. One of the company’s key strengths is its product diversification. Today, the company offers a complete range of bed linen, duvets, pillows, and stitchbonded products.

More information:
Andritz nonwovens
Source:

ANDRITZ-GRUPPE

02.03.2022

2021 financial year: Autoneum grows profitability and earnings in a difficult environment

All four Business Groups contributed to the significant improvement of the Group’s EBIT, which more than doubled by CHF 29.7 million to CHF 57.5 million, corresponding to an EBIT margin of 3.4%. This was achieved despite a slight decline in consolidated revenue to CHF 1.7 billion. Net profit amounted to CHF 30.1 million. In line with Autoneum’s longstanding dividend policy, the Board of Directors proposes a dividend of CHF 1.50 per share for the 2021 financial year.

All four Business Groups contributed to the significant improvement of the Group’s EBIT, which more than doubled by CHF 29.7 million to CHF 57.5 million, corresponding to an EBIT margin of 3.4%. This was achieved despite a slight decline in consolidated revenue to CHF 1.7 billion. Net profit amounted to CHF 30.1 million. In line with Autoneum’s longstanding dividend policy, the Board of Directors proposes a dividend of CHF 1.50 per share for the 2021 financial year.

We saw a number of global challenges again in 2021. The worldwide shortage of semiconductors dampened market development in the automobile industry. Although production volumes were almost the same in 2021, the year was more challenging from an operational perspective than 2020 was; supply chain bottlenecks led to short-term and unplanned production downtime at automotive manufacturers throughout the year. This resulted in frequent interruptions in production at Autoneum as well because of closely connected manufacturing processes. Rising costs for raw materials, energy, and transport presented additional challenges. Despite the challenging environment and weak global production volumes, Autoneum managed to return to profitability in 2021, generating a positive net result. Thanks to further operational improvements and optimization measures in all organizational areas, earnings were improved in all four Business Groups.

  • Revenue development influenced by semiconductor shortage
  • Operating profit and positive group net result thanks to improvements in all segments
  • Net profit and positive free cash flow enable an increase in equity ratio and a further reduction of net debt
  • Board of Directors proposes a dividend of CHF 1.50
  • Personnel change on the Board of Directors
  • Business Groups
  • Innovation Leadership for a safe journey towards a climate-friendly future
  • 10 years of Autoneum

Outlook
According to market forecasts1), global automotive production will increase by around 9% year-onyear in 2022. The semiconductor shortage is likely to continue for some time into 2023; however, we anticipate that the situation will increasingly stabilize over the course of the financial year 2022 with higher volatility in the first half of the year. Autoneum’s revenue development is expected to be in line with the market. Based on market development, Autoneum is targeting an EBIT margin of 4–5% and free cash flow in the high double-digit million range. In addition to addressing the current semiconductor shortage situation, Autoneum will continue to pursue its consistent implementation of strategic priorities and initiatives. The potential impacts of the current Ukraine crisis on our business cannot be estimated at this point in time.

Further information on the 2021 results as well as the 2021 Annual Report can be found at www.autoneum.com/2022/03/02/2021-annual-results

Source:

Autoneum Management AG

(c) DiloGroup
23.02.2022

DiloGroup at IDEA 2022

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 
DiloSpinnbau has a new “Unifeed” card feeder (VRS-P) which combines the principle of volumetric charged feeding with the characteristics of a chute feeder but without the conventional overhead trunk which allows for lower ceiling height requirement. The fibre flock matt is condensed by a vacuum delivery apron to give better uniformity of mass distribution. The distribution over the working width is controlled by additional flaps. This feeder can be adapted for medium/fine, coarse/medium or long staple fibres.
 
The “VectorQuadroCard” by DiloSpinnbau incorporates a modular transfer group between breast and main section. The quick change facility of this roller group provides different carding options. The delivery system is also flexible to provide parallel laid, random or condensed web. The preopener section on this card has 4 worker/stripper pairs with five pairs on the main cylinder. Emphasis is on high throughput with good web quality.
 
The revised HyperLayer NT offered by DiloMachines presents the latest state-of-the-art highspeed precision layering technique setting new standards which play an important role especially in hydroentanglement lines. In this application, it is important to achieve layering speeds up to 190 m/minute using sophisticated viscose fibres and a layering width of about 4 m while at the same time having a high layering precision in cross and longitudinal direction.  
 
DiloMachines will also present its portfolio to improve quality and reduce costs. The FutureLine study “3D-Lofter” – first presented at ITMA 2019 in Barcelona – is part of this programme. In this study individual web forming units can deposit fibre masses on freely programmable spots in longitudinal and cross direction thus saving overall fibre mass in applications such as deep moulded parts for the automotive interior. This ability reduces costs in production and operation. The “IsoFeed” concept for a more even flock mat for direct cards and aerodynamic web forming is another interesting field of web mat quality improvement.

More information:
IDEA DiloGroup nonwovens machinery
Source:

DiloGroup

(c) Flocus ™
22.02.2022

Flocus ™ kapok nonwovens and fabrics for the leather goods and footwear

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

  • Maliwatt - 50% Kapok, 50% PLA (based on corn), a 100% biodegradable non-woven which can be used in the shoe sole. Maliwatt can be thermopressed/heat press and turned into a paper/cardboard type and lightweight structure. It is the perfect material for sneakers, casual and active shoes thanks to its quick dry, antibacterial, hydrophobic, hypoallergenic, Insulation properties. Other frequent applications are in the field of automotive, construction and car panels, sound absorption and acoustics panels and geo textiles.
  • HDE /Hydroentanglement - 50% Kapok, 50% Organic cotton. It is a 100% natural and biodegradable material that can be used in the shoe production as a sole, intersole or as a padding for shoes and bags. Thanks to its termoregulating, lightweight, hypoallergenic, thermoconductivity, insulation, soft touch, hydrophobic, anti-moth anti mite properties, it is used for a large range of applications. It is popular in the apparel world as a cruelty free filling for winter jackets, replacing duck down, and in the home industry ad a stuffing for mattresses, duvets, furniture, sleeping bags.

The offer for the leather goods industry includes also Flocus™ kapok-based fabrics in different blends and weights: linings, coatings, fabric inserts, accessories, components rich in performance and style. For example, kapok and organic cotton with GOTS certification, kapok with Tencel and recycled polyester (Repreve), kapok with linen, organic cotton and a small percentage of Spandex.

These materials were presented at the September 2021 edition of Lineapelle in the exhibition "A New point of materials", dedicated to eco-responsible innovations in terms of technologies, applications, materials and machines.

Source:

Flocus

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

17.02.2022

RINCO ULTRASONICS continues to grow - new foundation RINCO Morocco

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

Source:

Rinco Ultrasonics AG

03.02.2022

The 2022 JEC Composites Innovation Awards: Official Finalists line up

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

  • Michel COGNET, Chairman of the Board, JEC Group
  • Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
  • Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
  • Jiming Sung HA, Professor, Hanyang University
  • Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
  • Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
  • Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
  • Henry SHIN, Head of Center, K-CARBON
  • Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
  • Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
  • Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

Source:

JEC Group

27.01.2022

Radici Yarn certified to ISO 50001 Energy Management Systems

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Source:

RadiciGroup

21.01.2022

Autoneum: Revenue development in 2021 impacted by semiconductor shortage

Business of the automobile industry and its suppliers was impacted in 2021 by the worldwide shortage of semiconductors and the correspondingly restrained development of production volumes, which was about the same as the previous year. Autoneum’s revenue in local currencies declined slightly by 1.6% compared with the previous year. In Swiss francs, Group revenue decreased by 2.3% to CHF 1 700.4 million year-on-year. For 2021 as a whole, an EBIT margin of a little more than 3% and a free cash flow of around CHF 70 million are expected.

Business of the automobile industry and its suppliers was impacted in 2021 by the worldwide shortage of semiconductors and the correspondingly restrained development of production volumes, which was about the same as the previous year. Autoneum’s revenue in local currencies declined slightly by 1.6% compared with the previous year. In Swiss francs, Group revenue decreased by 2.3% to CHF 1 700.4 million year-on-year. For 2021 as a whole, an EBIT margin of a little more than 3% and a free cash flow of around CHF 70 million are expected.

Owing to the global shortage of semiconductors, automobile production for 2021 as a whole increased by 2.5% to 76.4 million vehicles and was thus only slightly higher than the previous year’s level. Autoneum’s revenue in local currencies declined by 1.6% year-on-year. Although revenue developed better than the market in three of four regions, the Company lagged slightly behind the global market trend. On the one hand, this was due to the fact that some vehicle models of US manufacturers predominantly supplied by Autoneum were disproportionately affected by the shortage of semiconductors, and, on the other hand, due to the lower share of Business Group Asia in Autoneum’s total revenue. The consolidated revenue in Swiss francs fell by 2.3% to CHF 1 700.4 million compared to the previous year (2020: CHF 1 740.6 million).

Revenue development in the Europe, Asia and SAMEA regions well above market
Business Group Europe recorded a decline in revenue of 1.6% in local currencies and was thus well above the market trend, which saw production fall by 4.4%. By contrast, revenue for Business Group North America in local currencies dropped by 7.2% and was thus well below the market, which saw a small increase of 0.1%. The vehicle models of US customers predominantly supplied by Autoneum were disproportionately affected by the semiconductor shortage. Consequently, Autoneum lagged behind the market trend in this region. Asia was the market least impacted by the semiconductor shortage in financial year 2021. Accordingly, in 2021 Asian automobile production saw good growth of 5.1%. Business Group Asia once again exceeded the overall Asian market, with revenue growth of 6.7% in local currencies. Business Group SAMEA (South America, the Middle East and Africa) significantly exceeded the market trend in financial year 2021.

Although 8.6% more vehicles were produced in the region compared to the prior year, Business Group SAMEA’s revenue rose by an impressive 24.8% on an inflation- and currency-adjusted basis. This growth was largely supported by high-volume programs in Turkey and South Africa.

Thanks to better than expected revenue at the end of 2021, Autoneum is in the upper range of its guidance, which was adjusted in October. Based on provisional figures, Autoneum expects an EBIT margin of slightly more than 3% and a free cash flow of around CHF 70 million for 2021.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

04.01.2022

AMSilk & Mercedes-Benz: Sustainable car door pulls

  • AMSilk Partners with Mercedes-Benz to Present a Sustainable Bio-Based Product
  • The use of a biotechnology-based and certified-vegan silk-like fabric marks a first in the automotive sector

AMSilk GmbH (“AMSilk”), a leader in supplying innovative high-performance bio-based silk materials, announced a partnership with Mercedes-Benz, for the development of novel, sustainable car door pulls, as part of the car manufacturer’s latest technology programme, the VISION EQXX.

The new concept car, VISION EQXX, features innovative interior materials, revealing a way forward for luxury design that conserves resources and is in balance with nature. Among the organic interior design features are new door pulls made from AMSilk’s Biosteel® fiber. This high-strength, certified-vegan, silk-like fabric is made using AMSilk’s proprietary biotechnology expertise. AMSilk is the world’s first industrial supplier of vegan silk biopolymers which are 100% biodegradable, recyclable, renewable and zero-waste.

  • AMSilk Partners with Mercedes-Benz to Present a Sustainable Bio-Based Product
  • The use of a biotechnology-based and certified-vegan silk-like fabric marks a first in the automotive sector

AMSilk GmbH (“AMSilk”), a leader in supplying innovative high-performance bio-based silk materials, announced a partnership with Mercedes-Benz, for the development of novel, sustainable car door pulls, as part of the car manufacturer’s latest technology programme, the VISION EQXX.

The new concept car, VISION EQXX, features innovative interior materials, revealing a way forward for luxury design that conserves resources and is in balance with nature. Among the organic interior design features are new door pulls made from AMSilk’s Biosteel® fiber. This high-strength, certified-vegan, silk-like fabric is made using AMSilk’s proprietary biotechnology expertise. AMSilk is the world’s first industrial supplier of vegan silk biopolymers which are 100% biodegradable, recyclable, renewable and zero-waste.

Marking a first in the automotive sector, AMSilk’s Biosteel® provides a solution to the car industry whose need to replace petroleum-based content by natural, bio-based materials is increasingly growing.
This new project is the most efficient electric vehicle Mercedes-Benz has ever built and marks a new expression of efficiency and sustainability in interior design. The all-electric VISION EQXX was unveiled in a digital world premiere on the “Mercedes me” media online platform.

Ulrich Scherbel, Chief Executive Officer of AMSilk said: “We are extremely proud to partner with Mercedes-Benz on the technology programme VISION EQXX, providing sustainable interior design solutions from our best-in-class bio-based fibers. Amid a fresh wave of ambitious climate pledges, we are proud to be playing a leading role in providing solutions for a zero-waste future.”

Source:

Optimum Strategic Communications for AMSilk GmbH

© Beaulieu International Group
09.12.2021

B.I.G. Yarns: Major investments in new yarn technology

Building a strong future. B.I.G. Yarns reveals significant investment in its next-generation Polyamide (PA) technology to help global carpet tile manufacturers meet the demands of the contract market. In addition to this key investment, the company also announces its decision to become a new producer of polyester (PET) yarns for the automotive industry.

The two announcements reinforce the business’ leadership in yarn innovation and commitment to being at the forefront of supporting changing end-market needs.

B.I.G Yarns is stepping up its focus on developing and producing one-step 3Ply PA yarns using next-generation technology to answer needs for flexibility and broader design options in the carpet tile segment. Total production capacity for one-step 3Ply yarns will increase by > 20% through new lines installed at the plant in France, creating higher output and greater supply security by serving customers from all three of its global plants.

Building a strong future. B.I.G. Yarns reveals significant investment in its next-generation Polyamide (PA) technology to help global carpet tile manufacturers meet the demands of the contract market. In addition to this key investment, the company also announces its decision to become a new producer of polyester (PET) yarns for the automotive industry.

The two announcements reinforce the business’ leadership in yarn innovation and commitment to being at the forefront of supporting changing end-market needs.

B.I.G Yarns is stepping up its focus on developing and producing one-step 3Ply PA yarns using next-generation technology to answer needs for flexibility and broader design options in the carpet tile segment. Total production capacity for one-step 3Ply yarns will increase by > 20% through new lines installed at the plant in France, creating higher output and greater supply security by serving customers from all three of its global plants.

The new lines use B.I.G. Yarns’ cutting-edge PA yarn technology which expands design, contrast and colour freedoms for carpet tile manufacturers, and increases flexibility in lot sizes. These advances enable customers to respond quickly to developments in the contract market. In addition, the new technology features a higher level of automation which improves ergonomics for B.I.G. Yarns’ employees. Importantly, it also optimizes energy use which contributes in energy savings at the French site specifically. The new production lines will be deployed from mid-2022.

To enhance support for a future of more sustainable automotive interiors, B.I.G. Yarns will enter into PET yarn production for the first time and offer a portfolio of PET yarns by the third quarter of 2022. These will be available for automotive applications alongside its EqoCycle® recycled-based PA6 yarns.

Source:

Beaulieu International Group

AZL schließt gemeinsam mit 46 Industriepartnern Projekt zu Batteriegehäusen erfolgreich ab (c) AZL
06.12.2021

AZL: Gemeinsames Projekt zu Batteriegehäusen mit 46 Industriepartnern

Gemeinsam mit insgesamt 46 Industriepartnern konnten mehrere, verschiedene Konzepte für Kunststoff-basierte Multimaterial-Batteriegehäuse erarbeitet werden, mit denen deutliche Einsparpotentiale bei Gewicht und Kosten möglich sind. Im Projektverlauf kristallisierten sich zwei wichtige Kernthemen heraus, die in Folgeprojekten gesondert behandelt werden sollen: Bodenaufprallschutz und Feuerbeständigkeit. Diese zwei Folgeprojekte starten am 26. Januar 2022. Ein Projekt zur Entwicklung und Realisierung von Prototypen für Mitte nächsten Jahres 2022 ist in Planung.

Gemeinsam mit insgesamt 46 Industriepartnern konnten mehrere, verschiedene Konzepte für Kunststoff-basierte Multimaterial-Batteriegehäuse erarbeitet werden, mit denen deutliche Einsparpotentiale bei Gewicht und Kosten möglich sind. Im Projektverlauf kristallisierten sich zwei wichtige Kernthemen heraus, die in Folgeprojekten gesondert behandelt werden sollen: Bodenaufprallschutz und Feuerbeständigkeit. Diese zwei Folgeprojekte starten am 26. Januar 2022. Ein Projekt zur Entwicklung und Realisierung von Prototypen für Mitte nächsten Jahres 2022 ist in Planung.

Batteriegehäuse gehören zu den Schlüsselkomponenten in E-Fahrzeugen und werden derzeit in der Regel aus Aluminium hergestellt. Genau diese Komponente analysierte das AZL in dem jetzt durchgeführten Projekt mit einem großen Konsortium aus Automobilherstellern, Automobilzulieferern, Rohstoffherstellern und Maschinenherstellern. „Der enorme Zuspruch aus der Industrie unterstreicht die Relevanz des Themas“, freut sich der Projektleiter Warden Schijve, der zudem sehr zufrieden mit dem Verlauf und den Ergebnissen ist. Schließlich lassen sich bis zu 36 % des Gewichts und bis zu 20 % der Kosten einsparen, wenn anstelle herkömmlicher Lösungen Multi-Material-Verbunde auf Basis von Kunststoffen zum Einsatz kommen.

Um zu den Ergebnissen zu gelangen, hat das AZL unter Mitwirkung seiner Partnerunternehmen, zu denen unter anderem Audi, Asahi Kasei, Covestro, DSM, EconCore, Faurecia, Formosa, Hengrui, Hutchinson, IPTE, Johns Manville, Magna, Marelli und Teijin, gehörten, zunächst fünf Subkomponenten eines Batteriegehäuses definiert: die Gehäusewanne, die Bodenschutzplatte, den Crash-Rahmen, die Querbalken und den Gehäusedeckel. Außerdem analysierten die Partner insgesamt 44 marktrelevante, existierende Serienkomponenten und Konzepte genauer und erstellten eine umfangreiche Übersicht über die verschiedenen Standards sowie Anforderungen auf nationaler, internationaler und OEM-Ebene. Prämisse dabei war, gleiche oder gar bessere mechanische Kennwerte zu erreichen als bei herkömmlichen Lösungen. So sollten beispielsweise mindestens gleiche Steifigkeiten, Sicherheiten bei seitlichem Aufprall, EMI-Abschirmung sowie Flammschutz vorhanden sein. Um nun die alternativen Lösungen zu ermitteln, entwickelte das AZL 20 Designkonzepte mit unterschiedlichen Materialkombinationen. Zur Analyse und Auslegung der verschiedenen Konzepte wurden mehr als 500 FEM-Modelle erstellt und über 1.500 CAE-Simulationen durchgeführt.

Während sich Folgeprojekt 1 mit einer anwendungsbezogenen Testmethode und der Untersuchung der Sicherheit verschiedener Materialkombinationen für den Bodenaufprallschutz beschäftigt, steht in Folgeprojekt 2 die Flammresistenz verschiedener Materialien und Materialkombinationen im Vordergrund. Ziel ist es Prüfverfahren zu entwickeln, die es erlauben, die Aufprall-/Feuerbeständigkeit auf Materialebene unter Berücksichtigung der spezifischen Anforderungen an ein Batteriegehäuse im Vergleich zu Standardmaterialien zu untersuchen.

Firmen mit Interesse an Herstellung von Batteriegehäusen können sich an Philipp Fröhlig und Alexander Knauff wenden:
Philipp Fröhlig, AZL Aachen GmbH, Senior Project Manager, Tel: +49 241 47573514, philipp.froehlig@azl-aachen-gmbh.de
Alexander Knauff, AZL Aachen GmbH, Manager Industrial Services, Tel: +49 241 47573516, alexander.knauff@azl-aachen-gmbh.de

 

Source:

AZL Aachen GmbH

(c) Hexcel Corporation
02.12.2021

Hexcel Partners with METYX for High Performance Carbon Pultrusion Technology

Hexcel Corporation (NYSE: HXL) is collaborating with METYX to manufacture high-performance carbon pultruded profiles made from polyurethane (PU) resin and unidirectional carbon fiber for the wind energy market.

The two companies have joined forces to develop technology that builds on Hexcel expertise in polyurethanes for the ski industry combined with its strength in providing high-performance composites to wind energy customers and expanding to other markets for composite applications. METYX is a manufacturer of high-performance NCF and woven glass and carbon, consumables, core and fabric kitting, molds, prototypes, and components for industries including wind energy, marine, automotive, rail and construction.

Hexcel Corporation (NYSE: HXL) is collaborating with METYX to manufacture high-performance carbon pultruded profiles made from polyurethane (PU) resin and unidirectional carbon fiber for the wind energy market.

The two companies have joined forces to develop technology that builds on Hexcel expertise in polyurethanes for the ski industry combined with its strength in providing high-performance composites to wind energy customers and expanding to other markets for composite applications. METYX is a manufacturer of high-performance NCF and woven glass and carbon, consumables, core and fabric kitting, molds, prototypes, and components for industries including wind energy, marine, automotive, rail and construction.

More information:
Hexcel METYX pultrusion
Source:

Hexcel Corporation

 Radici: Mehr Nachhaltigkeit auf der Piste (c) RadiciGroup
Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
01.12.2021

Radici: The sustainability our mountains deserve

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

The ski suit, consisting of jacket and trousers, is fashioned with a fabric made of RENYCLE, a RadiciGroup yarn obtained from mechanically recycled polyamide (nylon), which affords notable savings in energy and water consumption, as well as lower CO2 emissions. In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide.

This achievement was made possible by the great teamwork of RadiciGroup and DKB on the research and development of chemically compatible materials that can be used in special applications requiring high technical performance. The end result is an almost mono-material garment that significantly facilitates end-of-life recycling. It can be more easily converted into polymers for use in the manufacture of ski boot components and bindings, in addition to applications in the automotive and furnishing industries, or in any other sector requiring the characteristics of high performance polyamides.

The ski suit by RadiciGroup is thus an all-round application of ecodesign and circular economy principles to fashion and garment making, which justifies the claim “Una sostenibilità all’altezza delle nostre montagne” [Sustainability worthy of our mountains] written in a logo patch on the inside of the jacket.

“I am particularly proud of this achievement, a synthesis of my passion and effort,” said Angelo Radici, president of RadiciGroup. “I’ve always loved mountaineering and skiing, and, together with my collaborators, I work hard at our company day in and day out to find innovative solutions that improve the sustainability of our industry. This ski suit is concrete proof of the fact that textiles and apparel can be made sustainable without compromising on comfort, design, looks or performance. I will never get tired of repeating that collaboration among the firms along the production chain is crucial to manufacturing goods with an ecodesign approach, considering their end-of-life recyclability and, thus, potentially giving them unlimited durability. Upstream producers, like us, gladly share our know-how in materials chemistry and experience in recycling with our downstream partners, so that, together, we can find sustainable and viable solutions in the various sectors where we operate.”

Source:

RadiciGroup

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

15.11.2021

Autoneum: Flexi-Loft with high acoustic performance

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

11.11.2021

SGL Carbon: Q3 2021 confirms encouraging upward trend

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

Almost all business units contributed to the positive sales development. As largest business unit with a 44.7% share of Group sales, Graphite Solutions (GS) contributed €332.7 million to Group sales in the first nine months of 2021 (9M 2020: €308.0 million). The sales increase of 8.0% is based in particular on the positive development of the important market segments Semiconductor & LED as well as Automotive & Transportation. The business units Carbon Fibers and Composite Solutions contributed €244.7 million (9M 2020: €223.4 million) and €92.1 million (9M 2020: €60.7 million), respectively, to Group sales and benefited primarily from increased demand from the automotive industry. Compared to the previous year, sales increased by 9.5% in Carbon Fibers and by 51.7% in Composite Solutions. Only the Process Technology business unit, with sales down 4.9% to €62.1 million, was not yet able to participate in the general economic upward trend.

See the attached document for more infomation.

More information:
SGL Carbon sales
Source:

SGL CARBON SE

DiloGroup: successful INDEX exhibition (c) DiloGroup
DiloGroup at the INDEX
10.11.2021

DiloGroup: successful INDEX exhibition

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

Source:

Oskar Dilo Maschinenfabrik KG