From the Sector

Reset
282 results
20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

Battery Show 2022: Freudenberg presents liquid absorbers for lithium-ion battery packs (c) Freudenberg
Freudenberg battery pack liquid absorbers
18.05.2022

Freudenberg auf Battery Show 2022

  • Freudenberg presents liquid absorbers for lithium-ion battery packs

The experts from Freudenberg Performance Materials (Freudenberg) will be presenting battery pack liquid absorbers, an innovative solution that makes battery systems safer, at this year's Battery Show in Stuttgart. The absorbent pads capture and store unwanted liquids inside the packs quickly and reliably. With adjustable absorption capacity and geometries, battery pack liquid absorbers ensure long-lasting battery packs. Visitors will find Freudenberg at Stand C 36 in Hall 10 from June 28 to 30.

Battery packs are the core elements of mobile and stationary lithium-ion energy storage systems. They are used in automotive and industrial applications. The performance and lifespan of these components are largely responsible for the efficiency of the energy storage system. Moisture inside the packs, such as condensation water or leaking coolant, can considerably diminish both function and lifespan. Battery pack liquid absorbers act as a safety system: the special fleece quickly takes up condensate or coolant and stores it effectively.

  • Freudenberg presents liquid absorbers for lithium-ion battery packs

The experts from Freudenberg Performance Materials (Freudenberg) will be presenting battery pack liquid absorbers, an innovative solution that makes battery systems safer, at this year's Battery Show in Stuttgart. The absorbent pads capture and store unwanted liquids inside the packs quickly and reliably. With adjustable absorption capacity and geometries, battery pack liquid absorbers ensure long-lasting battery packs. Visitors will find Freudenberg at Stand C 36 in Hall 10 from June 28 to 30.

Battery packs are the core elements of mobile and stationary lithium-ion energy storage systems. They are used in automotive and industrial applications. The performance and lifespan of these components are largely responsible for the efficiency of the energy storage system. Moisture inside the packs, such as condensation water or leaking coolant, can considerably diminish both function and lifespan. Battery pack liquid absorbers act as a safety system: the special fleece quickly takes up condensate or coolant and stores it effectively.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Freudenberg Experts meet Sustainability (c) Freudenberg Performance Materials
Sustainable seat covers padding material by FILC
11.05.2022

Freudenberg Experts meet Sustainability

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Evolon® textiles made from recycled PET
With Evolon® RE, Freudenberg Performance Materials is presenting an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by cycling post-consumer PET bottles in-house. Evolon® RE products are available for various applications such as technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm. For high-tech wiping, lightweight Evolon® RE is now available starting from 30g/sqm. The material meets the needs of cleaning specialists for more sustainable wiping solutions. Evolon® RE offers the same high quality and material performance as all other Evolon® textiles.

Tarpaulins made from recycled raw materials presented by Mehler Texnologies®
When it comes to tarpaulins on trucks, both protection of the transport cargo and advertising for the transport company place high demands on the material. Mehler Texnologies® tarpaulin material ranks among the premium products for truck tarpaulins. The company is a pioneer in sustainable development and is showcasing POLYMAR® 8556 ECO CF. This unique material has a 25% share of recycled raw materials in the coating mass. In addition, the material is made with 100% R-PES yarns. The input materials undergo a complex separation and filtering process.

Sustainable padding material for automotive and furniture seat covers presented by FILC
FILFLEX is a soft and flexible padding layer made from nonwovens for automotive and furniture seat covers. It prevents leather from creasing and improves the dimensional stability of the seat covers. In terms of sustainability, its benefit is its 100% PET composition, making FILFLEX easy to recycle. FILFLEX offers customers easier handling during sewing and the seat covering process. End users benefit from the high seating comfort.

SHIMA SEIKI to Exhibit at Techtextil North America 2022 (c) SHIMA SEIKI
SWG091N2
11.05.2022

SHIMA SEIKI to Exhibit at Techtextil North America 2022

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Pioneered by SHIMA SEIKI, WHOLEGARMENT® knitting technology is capable of producing knitted items in their entirety without the need for sewing, and allows complex 3D forms to be knit such as car seat covers and interior furnishings. Selective compression allows control over placement and amount of pressure for various compression wear in sports and medical applications. The seam-free nature of WHOLEGARMENT® also ensures continuity of yarn, allowing functional yarns such as conductive yarns to wrap around the entire body without interruption, for applications in smart garments and wearable technology. Demonstrating the latest in WHOLEGARMENT® knitting technology at Techtextil will be the flagship MACH2XS machine that features the company’s original SlideNeedle™ on 4 needle beds and patented springloaded full-time sinker system. Capable of WHOLEGARMENT® knitting in all-needles, MACH2XS offers great flexibility for knitting high-quality WHOLEGARMENT® products with a seemingly endless variety of knit patterns at very high speed and efficiency, all while minimizing dependence upon labor-intensive sewing and linking. At Techtextil North America MACH2XS will be shown knitting a seam-free balaclava in one entire piece using fire-resistant yarn.

Also shown will be the SWG091N2 compact WHOLEGARMENT® knitting machine, also featuring SlideNeedle™ technology. Capable of producing small knitted items from safety gloves and compression socks to more sophisticated industrial applications such as tubular shields and harnesses, SWG091N2 offers unique solutions for the automotive, aerospace, sports, medical, safety, outdoor and other markets by knitting items in 3D without seams. SWG091N2 will be knitting fire-resistant gloves at Techtextil North America. SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design and simulation of various technical textiles. Of particular interest is its ultra-realistic simulation capability that realizes virtual sampling. When numerous variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time and cost normally associated with producing actual physical samples for each variation. The sustainability factor is also undeniable considering the amount of material normally gone to waste in the sampling stage.

Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets (c) Hexcel
Hexcel HexPly® Nature Range
11.05.2022

Hexcel Launches HexPly® Nature Range

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

  • Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

At JEC World in Paris on May 3-5, Hexcel presented an alpine ski produced by the Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature Range M78.1-LT UD flax fiber prepreg. In addition to providing a bio-based material solution, the natural fiber-reinforced prepreg also offers the potential to improve impact performance and vibration damping in the ski.

Claude Despierres, VP of Sales and Marketing – Industrial at Hexcel, said, “Our new HexPly Nature Range forms an important part of providing customers with biobased, TÜV-certified material options based on our established prepreg resin systems. Marine, winter sports, wind energy and automotive manufacturers can now have the choice to switch from petroleum-based material solutions to Hexcel HexPly Nature Range with no compromise in performance or process efficiency.”

More information:
Hexcel’s HexPly® JEC World
Source:

Hexcel

Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

(c) Hexcel Corporation
29.04.2022

Hexcel Composite Solutions for the Automotive, Marine, Wind Energy and Recreation Markets at JEC World 2022

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

G-Vent Technology for Marine Structures
Hexcel has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. A full range of Hexcel marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) regardless of the laminate thickness. Leading marine non-destructive testing specialists Q.I. Composites recently confirmed that the thick section G-Vent panels they had evaluated had void contents and laminate quality in line with state-of-the-art autoclaved prepreg components. Visitors to the Hexcel stand will see a unique 400mm carbon cube cured in a single stage using 695 layers of HexPly M79 carbon fiber UD600 prepreg with G-Vent technology.

New HexPly® Nature Range Sustainable Prepregs
HexPly® Nature Range prepregs feature proven resins such as HexPly M49, M78 and M79 with bio-derived epoxy resin content. Created for use in all industrial markets, HexPly Nature Range materials can be seamlessly integrated into existing production processes, maintaining consistent mechanical performance and processing properties. A dedicated sustainability corner of the Hexcel stand will detail Nature Range products optimized for automotive, marine, wind energy and winter sport applications. The display will include an alpine ski produced by leading manufacturer Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature M78.1 UD flax prepreg material. In addition to the reduced environmental impact of the sustainably grown reinforcement, the flax fiber laminates also improve impact resistance and vibration damping in the ski.

HexPly® XF Surface Technology for Improved Part Surface Finish Quality
HexPly XF is a lightweight, semi-preg material that replaces traditional in-mold gel coat. It eliminates time-consuming refinishing work typically required to obtain a paint-ready surface and produces lighter, more consistent parts with shorter cycle times and a cleaner working environment. Visitors to the stand will see a composite panel illustrating a high-quality painted surface enabled with XF technology in a diverse range of industrial applications such as super yacht roof parts, Class A surface automotive panels, and both prepreg and infused wind turbine blades.

HexPly® M49 Prepreg for Automotive Visual Carbon Parts
HexPly M49 is easy to process and is especially suitable for visual carbon fiber-look applications such as the Brabus hood scoop on display on the Hexcel stand at JEC.

HexPly® Prepregs and HiMax® Reinforcements for Performance Marine Structures
Using a scale model of a Gunboat 68 performance sailing catamaran, Hexcel will illustrate how its HexPly and HiMax materials provide manufacturers with a complete set of lightweight composite solutions for high-performance marine structures. HexPly prepreg was selected for critical structural parts of the Gunboat 68 and provides very high mechanical performance including high dry and wet Tg.

Heavyweight HiMax reinforcements offer high deposition rates and remain easy to handle after cutting, making them highly suitable for industrial applications. In combination with a lightweight PrimeTex® woven fabric, the package of carbon fiber HiMax materials developed for the Gunboat 68 enabled consistent resin flow during infusion with reduced surface print-through.

Hexcel Fibers and Reinforcements for Lightweight Sporting Equipment
Sporting equipment manufacturers rely on Hexcel composite materials to deliver the ultimate performance at the lowest possible weight. Hexcel will exhibit a number of the latest high-performance sporting equipment applications such as a Bauer hockey stick featuring PrimeTex 98 gsm AS4C 3K fabric and a Corima tri-spoke cycling wheel made with lightweight Hexcel carbon fiber UD tape. Hexcel will also demonstrate how its HexTow® carbon fibers are used in key leisure and marine applications by displaying an AEROrazr solid carbon rigging component manufactured by spar and rigging manufacturer Future Fibres for the 36th America’s Cup.

 

Source:

Hexcel Corporation / 100% Marketing

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

Photo: JEC Group
26.04.2022

The Winners of the 2022 JEC Composites Innovation Awards

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

  • Aerospace Application
    Diab (Sweden): 100% thermoplastic panel for cabin interiors
  • Aerospace – Process
    MTorres Disenos Industriales S.A.U. (Spain): Innovative Infusion Airframe Manufacturing System
  • Automotive & road transportation – Structural
    Jaguar Land Rover Limited (UK): TUCANA
  • Automotive & road transportation – Surfaces
    AUDI AG (Germany): Seamless Integration of Flexible Solar Film in FRP
  • Building & Civil Engineering
    Windesheim (Netherlands): Structural Re-Use of Thermoset Composites
  • Design, Furniture and Home
    Kairos (France): Kairlin®, a new recyclable & compostable material
  • Equipment and Machinery
    Fibraworks GmbH (Germany): Winding the future – fibraforce technology
  • Maritime Transportation & Shipbuilding
    Voith Composites SE & Co. KG (Germany): Marine Rotor Blades made of Voith ‘Carbon4Stack’
  • Renewable Energy
    Siemens Gamesa Renewable Energy (Denmark): RecyclableBlade
  • Sports, Leisure & Recreation
    Bcomp Ltd. (Switzerland): Eco-joint from thermoset race and thermoplast road
Source:

JEC Group

(c) Cobra International
26.04.2022

COBRA International: Highlights Diversification into New Market Sectors at JEC World 2022

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Sustainability Options for Automotive and Watersports
Sustainability has a been a key focus for the Cobra Waterports division and CAC, the Cobra automotive business unit. At JEC World 2022, Cobra will showcase the increasing material and process options it has developed with both bio-resin and natural fibre reinforcements variants presented alongside more traditional carbon fibre parts.

Visitors will be able to get up close to a new Bio SUP Wingfoil board featuring a basalt, flax, bamboo and GreenPoxy bio-epoxy construction created for partners NSP, as well as state-of-the-art compression moulded prepreg foils. Cobra’s first fully recyclable surfboard incorporating the Recyclamine® resin technology that Cobra was recognised for in the 2020 JEC Innovation Awards will also be on display alongside a new Audi e-tron foil by Aerofoils – the world’s safest electric hydrofoil board.

The CAC team (Automotive Business Unit of Cobra) will present a set of OEM mirror cap parts that showcase a range of carbon SMC, woven visual carbon, pure woven visual flax, hybrid flax-carbon and painted flax construction options for the same component.  Clear carbon aesthetic and structural parts including CAC made M-carbon components for the BMW S 1000 RR Motorcycle will furthermore underline the high quality and eye-for-detail for which CAC is renowned.

Carbon Prosthetics
An entirely new composite application for the company, Cobra will also show two composite prosthetic devices at JEC which were productionised by the in-house design and development team. Working alongside a leading Thai university and a medical device OEM, Cobra created a rapid and cost effective series production process for a lightweight carbon fibre prosthetic foot. In another example of lightweight composites creating major quality of life improvements, Cobra has also designed and manufactured a carbon and glass fibre prepreg foot support for Elysium Industries.

More information:
COBRA Composites UAV
Source:

Cobra International

Sappi at the FESPA Global Print Expo 2022 in Berlin (c) Sappi Europa
Sappi at the FESPA Global Print Expo 2022
20.04.2022

Sappi at the FESPA Global Print Expo 2022 in Berlin

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Experience the comprehensive portfolio of sublimation papers
  • Learn about Sappi’s plans to support further market growth
  • See the benchmark products for corrugated board production
  • Explore the full range of silicone base papers

Investment in increasing production capacities for sublimation papers
Sappi’s theme for this year’s FESPA Global Print Expo is “Seed. Thrive. Earn.” Sappi, one of the world’s leading manufacturers of speciality papers, has indeed planted a seed by recognising the rapidly growing importance of sublimation papers for digital transfer printing. The company recently announced that it will be investing a sum in the low double-digit million euros over the next two years in the expansion of its “Centre of Excellence” for speciality papers at its Carmignano site in northern Italy. The investment aims to increase production capacity to support further growth of the dye sublimation paper business. It will also further improve the company’s first-class service, while shortening delivery times.

Comprehensive product portfolio of sublimation papers for a multitude of applications
Thanks to previous investments, Sappi is ideally positioned to offer an extensive portfolio of dye sublimation papers for digital transfer printing. These are constantly being improved and adapted to the latest market requirements and ongoing developments in sustainability. Sublimation papers are used in the fashion, home textile, sportswear and sports equipment sectors as well as in the soft signage and hard substrates industries.

This year, all papers will be displayed with new designs and materials to give visitors the best possible overview and insight into the numerous application possibilities adapted to a variety of machine types and speeds. In addition to Sappi Basejet, an uncoated sublimation paper, the complete Transjet brand product family will be presented.

High-quality containerboard products for corrugated board applications
For applications such as promotion displays, high-quality packaging or e-commerce cartons, Sappi offers a portfolio of coated and uncoated liner qualities. These guarantee brilliant colour reproduction as well as excellent contrast and improved readability. The 100 per cent virgin fibre Fusion range liners are today’s premium solutions for displays, consumer packaging, shelf-ready packaging and trays. With their homogeneous surface and high whiteness, the virgin fibre liners fulfil all the requirements for strong brand impact at POS.

A full spectrum of silicone base papers
Silicone base paper products complement Sappi’s portfolio at this year’s FESPA. Developed as release liners for self-adhesive applications such as automotive foiling, outdoor advertising and office materials, they offer exceptional siliconization properties as well as easy and efficient processing.

More information:
Sappi Europe Fespa Global Expo
Source:

Sappi Europe

(c) COBRA International
12.04.2022

COBRA International showcases its portfolio for vehicle systems at AUVSI XPONENTIAL 2022

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

At AUVSI XPONENTIAL, Cobra will also illustrate how the company leverages innovation and expertise developed in its water sports and automotive business to enhance its product offering to the UAV sector. Products on display include a Fliteboard electric foiling surfboard, pre-preg hydrofoil parts, lightweight medical prosthetics, flax and forged carbon parts, as well as a full set of visual carbon and painted automotive trims, each demonstrating the company’s high volume production capacity for ultra-light carbon composite structures.

The show will take place from the 25 to 28 April at the Orange County Convention Center, Orlando, Florida.

Source:

COBRA International / 100% Marketing

(c) Hologenix, LLC
11.04.2022

Hologenix® receives recognition for pure white CELLIANT

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Pure white CELLIANT rPET fiber is sustainably manufactured, with a low-impact supply chain. It is achieved by embedding bioceramic materials, that are naturally derived and ethically sourced, into fibers, yarns and fabrics. Wellman International has converted 100% of pure white CELLIANT Polyester production into rPET. This conversion to rPET has been implemented across all CELLIANT product categories, replacing traditional polyester and dramatically enhancing CELLIANT’s sustainability initiatives.

Pure white CELLIANT is recognized as a Class 1 medical device in the European Union and is able to carry the CE mark. Like CELLIANT, pure white CELLIANT captures and converts body heat into infrared energy, powering bio-responsive textiles. This energy is reflected back to the body, resulting in increased local circulation and cellular oxygenation. These advantages have a variety of wellness benefits, including stronger performance, faster recovery and better sleep, as well as many functional properties such as thermoregulation, quick-dry properties and odor inhibition.  

Wellman International distributes pure white CELLIANT fibers across Europe, the Middle East, Africa, Asia and the USA.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

Cobra
05.04.2022

COBRA to Sponsor and Manufacture JEC Trophies

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

The 2022 trophies are designed and produced by Cobra’s Design and Development department - the in house team that supports Cobra’s mass production operations with specialist expertise in product design, industrial design & prototyping. The sweeping curves of the trophies are influenced by perfume bottles, linking back to JEC’s French cultural heritage.  The design also combines a pallet of different materials to symbolise the JEC Group’s complete coverage of the composites sector. Acrylic, upcycled teak production waste from the furniture industry, Innegra™, flax, carbon, and aramid materials have been combined with Sicomin’s GreenPoxy 33 bio-resin to reference the award programme’s combined focus on innovation and sustainability.

The JEC Composites Innovation Awards are presented annually, recognising, and rewarding the most cutting-edge and ingenious projects that exploit the full potential of composite materials. Over the last 20 years, the JEC Composites Innovation and Startup programs have celebrated both innovation and partnership. The JEC Group will announce the winners for the 2022 JEC Composites Innovation awards on April 26th in Paris and in live streaming, and the Start-up Booster winners on May 3rd at JEC World.

“Cobra is delighted to reinforce its partnership with JEC Group, sponsoring and manufacturing the JEC trophies for 2022,” comments Danu Chotikapanich, CEO, Cobra.  “These are two of the most prestigious and respected awards programs within the composites industry and one that also matches Cobra’s ongoing commitment to innovation and sustainability improvements. Working with the latest bio resin technology, natural fibre reinforcements and upcycled composite and wood production waste materials our Design and Development team have created some stunning trophies for this year’s award season.”

Source:

COBRA International Co.,Ltd.

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

30.03.2022

EDANA released its statistics on Nonwovens Production and Deliveries for 2021

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres).

EDANA, the international Association serving the nonwovens and related industries today released its statistics on Nonwovens Production and Deliveries for 2021. Following the impressive growth recorded in 2020, the updated figures for Greater Europe (incl. Western and Eastern Europe countries, Turkey, Belarus, Russia and Ukraine) highlight again the ability of the European industry to innovate and to invest in order to meet the challenges of the pandemic crisis.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres). Since 2019, the European output increased by nearly 9%.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres).

EDANA, the international Association serving the nonwovens and related industries today released its statistics on Nonwovens Production and Deliveries for 2021. Following the impressive growth recorded in 2020, the updated figures for Greater Europe (incl. Western and Eastern Europe countries, Turkey, Belarus, Russia and Ukraine) highlight again the ability of the European industry to innovate and to invest in order to meet the challenges of the pandemic crisis.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres). Since 2019, the European output increased by nearly 9%.

Jacques Prigneaux, EDANA’s Market Analysis and Economic Affairs Director commented “This 2% average growth is in line with European forecasts disclosed in October 2021 in our Global Nonwoven Markets 2020-2025 report. In 2021, significant growth areas for nonwovens were recorded in building construction (+17.4%), agriculture (+11.3%), electronic materials (+10.1%) and air filtration (+9.1%). Countering this, a further decline of -1% was recorded in automotive interior applications. In some market segments, a comparison with the pre-COVID situation is probably more relevant. This is particularly true in hygiene, medical and wipes nonwovens, which were almost flat or slightly decreasing compared to the level reached in 2020, but still much higher than in 2019”.

He added: “Looking at the different production processes of nonwovens, various trends were observed in 2021. The production of fiber-based materials, including Drylaid, Wetlaid, and Airlaid technologies, recorded divergent growth rates (respectively +2.4%, +1.1% and -4.8%), and spunmelt nonwovens recorded a growth rate of +3.1%. In Drylaid, the highest growth in tonnes was observed in needlepunched, with a 6.4% increase. The production of drylaid-hydroentangled, which peaked in 2020, was at the same level a year later”.

More information:
Edana nonwovens
Source:

EDANA