From the Sector

Reset
201 results
07.07.2022

Carbios, On, Patagonia, PUMA and Salomon team up to advance circularity

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 
Carbios’ innovative process constitutes a technological breakthrough for the recycling of polyester (PET) fibers, which are widely used in apparel, footwear and sportswear, on their own or together with other fibers. PET polyester is the most important fiber for the textile industry with 52 MT produced, even surpassing cotton at 23MT. The biorecycling process uses an enzyme capable of selectively extracting the polyester, recovering it to recreate a virgin fiber. This revolutionary technology makes it possible to recover the PET polyester present in all textile waste that cannot be recycled using traditional technologies.
 
PET plastics and fibers are used to make everyday consumer goods such as bottles, packaging and textiles. Today, most PET is produced from fossil resources, then used and discarded according to a wasteful linear model. By creating a circular economy from used plastics and fibers, Carbios’ biorecycling technology offers a sustainable and more responsible solution.

More information:
Carbios PET circularity
Source:

Carbios

(c) Autoneum Management AG
27.06.2022

Autoneum: Sound-insulating technologies for electric drives

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

With the fibrous technology Hybrid-Acoustics PET and the two foam alternatives Hybrid-Acoustics FLEX and Fit FLEX, the Company offers three standardized technologies that reduce noise directly at the source, thereby improving driver comfort. All three technologies are produced waste-free and their adaptive capacity to different sizes and shapes allows for a broad spectrum of uses in electric vehicles: from e-motor encapsulations to the reduction of noise and vibration of inverters, gearbox, pumps and compressors. By offering both fibrous and foam-based variants, Autoneum is able to flexibly cater to individual customer needs and preferences with regard to material, acoustic concept, sustainability and costs.

In terms of sustainable noise protection in the engine bay, Autoneum’s patented innovation Hybrid-
Acoustics PET sets the tone: it is made of 100 percent PET with up to 50 percent recycled fibers; cut-offs in production are reclaimed, processed and reused and the material can be fully recycled at the end of product life. The unique textile technology, which is part of the Company’s sustainability label Autoneum Pure, is particularly suited to attenuating high-frequency sounds of the electric drive unit and offers the optimum balance of absorption and insulation. Moreover, components made of Hybrid-Acoustics PET are up to 40 percent lighter compared to standard insulators.

To accommodate the differing preferences of vehicle manufacturers, Autoneum has complemented its lightweight textile technology with two foam-based alternatives. Since the foam is injected in both technologies, no waste is generated during production either. Hybrid-Acoustics FLEX is based on the same acoustic concept as Hybrid-Acoustics PET, but the decoupler is made of foam instead of felt. Autoneum’s Fit FLEX, on the other hand, combines the foam decoupler with an injection molded heavy layer. Thanks to the high geometrical adaptability of foam to even complex shapes, both technologies offer outstanding acoustic performance in the insulation of e-motors and other noise sources in electric vehicles. Furthermore, the absorbing or insulating acoustic quality of the foam can be flexibly tuned to specific customer needs.

Source:

Autoneum Management AG

(c) Coperion GmbH
24.06.2022

Coperion: New Development for Plastic Fiber and Flake Recycling

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Source:

Coperion GmbH / Konsens Public Relations GmbH & Co. KG

22.06.2022

EREMA: POWERFIL presents new laserfilter

POWERFIL, a business unit of recycling machine manufacturer EREMA GmbH, presents its 2/406 laserfilter.

"For applications with a focus on melt quality and filtration fineness, this increase in screen area ensures lower pressure and temperature at the same throughput rate, allowing even finer screens to be used for even better results in quality-intensive plastics applications," explains Robert Obermayr, Head of Business Unit POWERFIL, EREMA GmbH. If the throughput capacity of the recycling plant needs to be increased, a significantly higher rate of plastic melt can be filtered while maintaining the other parameters thanks to the larger surface area of the screen. Up to 9,000 kilogrammes of melt can be filtered per hour with the Quattro version of the new LF 406 laserfilter.

POWERFIL, a business unit of recycling machine manufacturer EREMA GmbH, presents its 2/406 laserfilter.

"For applications with a focus on melt quality and filtration fineness, this increase in screen area ensures lower pressure and temperature at the same throughput rate, allowing even finer screens to be used for even better results in quality-intensive plastics applications," explains Robert Obermayr, Head of Business Unit POWERFIL, EREMA GmbH. If the throughput capacity of the recycling plant needs to be increased, a significantly higher rate of plastic melt can be filtered while maintaining the other parameters thanks to the larger surface area of the screen. Up to 9,000 kilogrammes of melt can be filtered per hour with the Quattro version of the new LF 406 laserfilter.

"Plastic recycling has become a must-have, even for input streams with higher levels of contamination. Efficient filtration systems are therefore indispensable for achieving the specified melt quality using existing extrusion systems," says Obermayr. That is why POWERFIL also offers the proven EREMA melt filters as individual components for existing EREMA machines and third-party extrusion systems. The product range includes the SW RTF partial area backflush system and the laserfilter. The range is aimed at manufacturers as well as recyclers, because the high-performance filters can be used to process post consumer plastics as well as post industrial films with paper labels and clean PET material. Both types of filter are particularly easy to integrate into an existing recycling plant and both are available in numerous sizes and variations. Whether the customer uses the robust backflush filter or the continuous high-performance laserfilter depends on the throughput and level of contamination of the material. The Laserfilter is ideal for heavy contamination. It handles impurity levels up to 5 percent and filtration as fine as 70 μm while continuously cleaning the screen with a scraper.

POWERFIL will also present the new 2/406 laserfilter and the full range of filters at the K 2022 trade fair stand for the EREMA Group.

More information:
EREMA Recycling plastics
Source:

EREMA Group GmbH

(c) Indorama Ventures PCL
21.06.2022

Indorama Ventures works with Auping and TWE Group to deliver a fully circular mattress

The sustainable collaboration and innovation between Indorama Ventures (IVL), Auping and TWE Group presented a certified cradle to cradle process for mattress components across nonwoven applications, at Techtextil, Frankfurt, 21st to 24th June 2022.

Using circular research and design, the industry partnership between IVL Mullagh (Ireland), Auping and TWE Group has resulted in a perpetual, sustainable economic business model, for manufacturers globally. The inclusion of safe raw materials within mattress manufacturing allows the materials to be easily disassembled at the product’s end of use in order to be further reused as same components or recycled into new raw material at the same quality level, to enable versatile textile applications.

The sustainable collaboration and innovation between Indorama Ventures (IVL), Auping and TWE Group presented a certified cradle to cradle process for mattress components across nonwoven applications, at Techtextil, Frankfurt, 21st to 24th June 2022.

Using circular research and design, the industry partnership between IVL Mullagh (Ireland), Auping and TWE Group has resulted in a perpetual, sustainable economic business model, for manufacturers globally. The inclusion of safe raw materials within mattress manufacturing allows the materials to be easily disassembled at the product’s end of use in order to be further reused as same components or recycled into new raw material at the same quality level, to enable versatile textile applications.

Designed for disassembly to optimize the use of existing resources, reduce carbon footprint and support customer objectives all along their customers’ supply chain. This circular industry collaboration begins with design, where the mattress is constructed using only two different base materials, 100% PET polyester textiles and steel wire pocket springs connected with Niaga®️, a non toxic reversible adhesive, making the mattress easy to disassemble and recover.

IVL, Auping and TWE’s shared vision for a better world is demonstrated through their connected and innovative circularity that helps to close the loop. Auping collects, sorts and separates the collected fabrics, which then go to IVL Mullagh for processing, melting and extrusion to form polyester staple fiber. These staple fibers are then converted by TWE Group into nonwovens for use in Auping’s Evolve mattress, a fully circular mattress. Following the end of mattress use, the material recovery process simply starts again.

Auping estimates that annually more than 40 million mattresses are disposed of in Europe alone, the majority of which are incinerated. Their take back system in the Netherlands ensures that when their new mattress is delivered, the old mattress is retrieved and recycled, irrespective of the brand, ensuring existing materials are continually optimized, diverted from landfill and kept in use to achieve a circular economy.

Source:

Indorama Ventures PCL

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

21.06.2022

RUDOLF celebrates its 100th birthday at TECHTEXTIL

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

PRISTINE® - Hygiene and freshness from continuous R&D advances. RUDOLF’s new ingredient brand that groups all high-performing technologies for textile hygiene, protection and freshness.

BIONIC FINISH® ECO - An idea borrowed from Mother Nature. Based on proprietary dendrimer technology, RUDOLF presents an extended family of unique fluorine-free DWR formulations suited for different materials and designed for different applications and needs.

New system solution
ECO-LOGIC® - Two-steps process designed and managed by RUDOLF’s specialists in textile process chemistry. It simulates, analyses and measures the environmental impact of a given industrial textile process to then provide insights into the optimization of resources, costs and CO2 emissions..

Source:

RUDOLF GmbH

(c) Trützschler Nonwovens & Man-Made Fibers GmbH
14.06.2022

Trützschler Man-Made Fibers presents OPTIMA systems for industrial yarns

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

OPTIMA enables the production of high-tenacity yarns for shoelaces, ropes and nets as well as low-shrinkage qualities for tire cords, truck tarpaulins and airbags. As the lines are modular, they can be quickly adapted to new market developments and end products.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

Thermore launches EVOdown® made of recycled fibers (c) Thermore
09.06.2022

Thermore launches EVOdown® made of recycled fibers

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

More information:
Thermore Down Fibers plastics Recycling
Source:

Thermore

Photo Carbios. Lionel Arras
30.05.2022

Carbios strengthens Executive Committee for Expansion Plans

Carbios announces the appointment of two new members to its Executive Committee: Lionel Arras, Industrial Development Director, and Mathieu Berthoud, Sourcing and Public Affairs Director.

Lionel Arras joined Carbios’ teams in 2021 to support the industrial growth of PET enzymatic recycling technology as Industrial Development Director. He was appointed to the Company’s Executive Committee on May 2. An engineer who graduated from ENSIC Nancy and holds an MBA from the Lyon School of Management, Lionel Arras has more than 25 years of experience in the field of process engineering and the chemical industry.
At Carbios, he now heads a team of around 50 people mobilized around three major divisions:
- the industrial demonstration plant, inaugurated last September in Clermont-Ferrand,
- technological development,
- the first Reference Unit project, installed on the Indorama Ventures site in Longlaville, Meurthe-et-Moselle, France.

Carbios announces the appointment of two new members to its Executive Committee: Lionel Arras, Industrial Development Director, and Mathieu Berthoud, Sourcing and Public Affairs Director.

Lionel Arras joined Carbios’ teams in 2021 to support the industrial growth of PET enzymatic recycling technology as Industrial Development Director. He was appointed to the Company’s Executive Committee on May 2. An engineer who graduated from ENSIC Nancy and holds an MBA from the Lyon School of Management, Lionel Arras has more than 25 years of experience in the field of process engineering and the chemical industry.
At Carbios, he now heads a team of around 50 people mobilized around three major divisions:
- the industrial demonstration plant, inaugurated last September in Clermont-Ferrand,
- technological development,
- the first Reference Unit project, installed on the Indorama Ventures site in Longlaville, Meurthe-et-Moselle, France.

Lionel Arras, Carbios’ Industrial Development Director: “After the successful start-up of our industrial demonstration plant in Clermont-Ferrand, we are continuing our scale-up with the construction of the first enzymatic recycling plant in the world in Longlaville, France. Its launch, scheduled for early 2025, will enable the processing of 50,000 tons of post-consumer PET waste or the equivalent of 2 billion bottles. It is a great source of pride for me to be able to support Carbios in this strategic development phase.”

Mathieu Berthoud will join Carbios as Sourcing and Public Affairs Director on June 1, 2022. With more than 30 years of experience, including 10 years at Rhodia (now Solvay) and more than 20 years at Suez, in various commercial development or subsidiary management positions, he was most recently Technical and Performance Director for the Group’s recycling and recovery activities. A university-trained scientist, he also holds an MBA from HEC Paris. At Carbios, he will be responsible for securing the supply of PET waste for the future reference plant in Longlaville and the other industrial sites that will follow. He will also manage the Company’s public affairs.

(c) RadiciGroup
27.05.2022

RadiciGroup's sustainable Repetable yarn at Emirates FA Cup final

RadiciGroup's sustainable Repetable yarn took to the field alongside Liverpool and Chelsea during the Emirates FA Cup final, which took place on 14 May at Wembley Stadium.
 
Over 47,000 plastic bottles were collected from previous events at Wembley stadium and transformed into Repetable, the innovative RadiciGroup yarn made from PET flakes, which was then used to make the red banner 105 meters long and 68 meters wide, unveiled during the opening ceremony of the event and decorated with the logos of the two teams.
 
Compared to virgin polyester, Repetable® allows lower CO2 emissions (-45%), lower water consumption (-90%) and lower energy consumption (-60%), guaranteeing high performance.

The red banner will be recycled again to make backpacks and sports bibs that the FA will donate to the local community to inspire the eco-players of the future: an initiative in the name of circularity!

RadiciGroup's sustainable Repetable yarn took to the field alongside Liverpool and Chelsea during the Emirates FA Cup final, which took place on 14 May at Wembley Stadium.
 
Over 47,000 plastic bottles were collected from previous events at Wembley stadium and transformed into Repetable, the innovative RadiciGroup yarn made from PET flakes, which was then used to make the red banner 105 meters long and 68 meters wide, unveiled during the opening ceremony of the event and decorated with the logos of the two teams.
 
Compared to virgin polyester, Repetable® allows lower CO2 emissions (-45%), lower water consumption (-90%) and lower energy consumption (-60%), guaranteeing high performance.

The red banner will be recycled again to make backpacks and sports bibs that the FA will donate to the local community to inspire the eco-players of the future: an initiative in the name of circularity!

Source:

RadiciGroup

26.05.2022

EREMA Group: Growing revenues, plant sizes and production capacities

The EREMA Group, which comprises EREMA Group GmbH and its subsidiaries EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC, closed the 2021/22 financial year with a 17 percent increase in revenue. Consolidated Group revenue amounted to EUR 295 million, and the number of employees increased to over 840. The EREMA Group remains on course for continued growth.

A closer look at the post consumer segment clearly shows a trend towards larger plants, both for PET recycling and for processing polyolefins. For example, the first VACUREMA® Basic 2628 T machine with an annual capacity of up to 40,000 tonnes was recently commissioned at a customer's site in Brazil. This plant features a ten-meter-long special geometry screw with a diameter of 280 millimetres and a weight of 3.5 tonnes. The screw was developed and manufactured by 3S, a subsidiary of EREMA GmbH.

The EREMA Group, which comprises EREMA Group GmbH and its subsidiaries EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC, closed the 2021/22 financial year with a 17 percent increase in revenue. Consolidated Group revenue amounted to EUR 295 million, and the number of employees increased to over 840. The EREMA Group remains on course for continued growth.

A closer look at the post consumer segment clearly shows a trend towards larger plants, both for PET recycling and for processing polyolefins. For example, the first VACUREMA® Basic 2628 T machine with an annual capacity of up to 40,000 tonnes was recently commissioned at a customer's site in Brazil. This plant features a ten-meter-long special geometry screw with a diameter of 280 millimetres and a weight of 3.5 tonnes. The screw was developed and manufactured by 3S, a subsidiary of EREMA GmbH.

Demand for previously-owned machines at UMAC also remained high during the past financial year. In addition to the general trend towards plastics recycling, the decisive factor here is that customers are more frequently opting for previously-owned systems available at short notice due to the tense situation on the procurement markets. At the same time, businesses that have so far had little contact with recycling are also becoming increasingly interested in this topic. Their need for feasibility studies, consulting and engineering services, project management and turnkey projects are now also very successfully catered for by KEYCYCLE, an EREMA Group company. KEYCYCLE has also acquired from Cadel Deinking the patent, technology and distribution rights for an innovative ink removal technology, which is now being further developed using the know-how of the EREMA Group and shaped into a product that meets industrial standards.

The initiative launched four years ago to modernise and expand existing EREMA Group sites was continued during the past financial year with the expansion and construction of a dedicated machine demonstration centre for PLASMAC in Milan. Equipped with additional production floor space and new and enlarged customer centres, all companies within the group are now well prepared to meet rising demand, and with the new research and development centre under construction in Ansfelden, the framework for further outstanding plastics recycling milestones from EREMA is currently being optimised.

Source:

EREMA Group GmbH

26.05.2022

New french recycling technology to recycle 50 million PET food trays per year

Indorama Ventures, VALORPLAST, Klöckner Pentaplast (kp) and CITEO collaboration delivers a commercial recycling solution for monolayer PET trays

Thai-based Indorama Ventures Public Company Limited (IVL) with its facility Wellman France Recycling in Verdun, has been working on the PET trays recycling for 6 years and through an ongoing project with VALORPLAST and supported by CITEO.

The project has the objective to develop and validate recycling for monolayer and multilayer PET trays. VALORPLAST has collected significant quantities of post-consumer PET trays and several industrial runs have been conducted by Wellman. The produced flakes are being tested by several actors to develop high quality applications. Those tests have led by IVL to develop a commercially feasible recycling solution for monolayer PET trays with the collaboration of Klöckner Pentaplast.
The new technology is processing monolayer PET trays used for food packaging (meat, produce and cheese) into a high-quality product, suitable for new tray production.

This new recycling innovation will see over 50 million post-consumer PET trays diverted away from landfill or incineration.

Indorama Ventures, VALORPLAST, Klöckner Pentaplast (kp) and CITEO collaboration delivers a commercial recycling solution for monolayer PET trays

Thai-based Indorama Ventures Public Company Limited (IVL) with its facility Wellman France Recycling in Verdun, has been working on the PET trays recycling for 6 years and through an ongoing project with VALORPLAST and supported by CITEO.

The project has the objective to develop and validate recycling for monolayer and multilayer PET trays. VALORPLAST has collected significant quantities of post-consumer PET trays and several industrial runs have been conducted by Wellman. The produced flakes are being tested by several actors to develop high quality applications. Those tests have led by IVL to develop a commercially feasible recycling solution for monolayer PET trays with the collaboration of Klöckner Pentaplast.
The new technology is processing monolayer PET trays used for food packaging (meat, produce and cheese) into a high-quality product, suitable for new tray production.

This new recycling innovation will see over 50 million post-consumer PET trays diverted away from landfill or incineration.

Testing has now moved into commercial production. 500 tonnes of PET trays are now being processed monthly and transformed into a high-quality tray flake, which can be used to produce new trays. The purity of the flakes is comparable with high-quality bottle flake. A further scale up is foreseen, and the company plans to process 10KT of tray flake in 2022.

More information:
PET recycling fibers
Source:

 Indorama Ventures Public Company Limited 

12.05.2022

Indorama Ventures reports results for 1Q22

Indorama Ventures Public Company Limited (IVL) reported a strong 1Q22 result, building on its record FY 2021 performance as the pandemic continued to retreat, driving demand across the company’s global integrated portfolio.

IVL achieved 1Q22 Core EBITDA of US$650 million, up 41% QoQ and 77% YoY, and a 4% increase in production volumes to 3.80 MMT. All three of IVL’s business segments grew as the company’s leading global position benefited overall in an environment of higher crude oil prices, increased ocean freight rates and a strengthening US dollar, led by resurging consumer demand and global mobility.

IVL’s Integrated Oxides and Derivatives (IOD) business benefits from a high crude oil price environment, as its shale gas advantage supports MTBE and MEG margins. As ocean freight rates increase, IVL’s PET and Fibers segments gain due to increased import parity pricing in Western markets, where about two thirds of its portfolio is situated. Management’s agile response to hedging and levying surcharges has helped to partially recuperate the surge in energy and utility costs in Europe as a consequence of the Russia-Ukraine conflict.

Indorama Ventures Public Company Limited (IVL) reported a strong 1Q22 result, building on its record FY 2021 performance as the pandemic continued to retreat, driving demand across the company’s global integrated portfolio.

IVL achieved 1Q22 Core EBITDA of US$650 million, up 41% QoQ and 77% YoY, and a 4% increase in production volumes to 3.80 MMT. All three of IVL’s business segments grew as the company’s leading global position benefited overall in an environment of higher crude oil prices, increased ocean freight rates and a strengthening US dollar, led by resurging consumer demand and global mobility.

IVL’s Integrated Oxides and Derivatives (IOD) business benefits from a high crude oil price environment, as its shale gas advantage supports MTBE and MEG margins. As ocean freight rates increase, IVL’s PET and Fibers segments gain due to increased import parity pricing in Western markets, where about two thirds of its portfolio is situated. Management’s agile response to hedging and levying surcharges has helped to partially recuperate the surge in energy and utility costs in Europe as a consequence of the Russia-Ukraine conflict.

The re-opening of economies bodes well for demand across IVL’s portfolio. However, China’s ongoing pandemic lockdowns impacted downstream polyester demand resulting in weakened MEG spreads. IVL’s businesses trade in US dollars and a strengthening dollar has positive impact, reducing conversion costs in emerging economies where IVL has a strong local presence.

Combined PET segment reported Core EBITDA of US$435 million, up 63% QoQ and 67% YoY supported by the reset of PTA/PET contracts at the end of 2021. IVL expects the tight supply-demand environment to continue through 2022, boosted by the upcoming peak summer season.

IOD segment achieved Core EBITDA of US$126 million, up 3% QoQ and 258% YoY as MTBE margins benefited from higher crude oil prices, demand remains strong for downstream products, and as the commissioning of the Lake Charles cracker contributes to earnings in 2022. The integration of the Oxiteno acquisition, completed in April, will bring additional upside to IOD from 2Q22.

Fibers segment delivered Core EBITDA of US$85 million, an increase of 4% QoQ and 17% YoY. Demand across the three Fibers verticals is stable with domestic sales yielding better profitability, while higher freight rates weighed on margins on export volumes from Thailand, Indonesia and India, and increased energy and utility costs impacted European operations.

1Q22 Performance Highlights

  • Consolidated Revenue of US$4,444M, an increase of 12% QoQ and 37% YoY
  • Record Reported EBITDA of US$784M, a YoY growth of 63%, and Core EBITDA of US$650M, a YoY growth of 77%
  • Production volumes up 4% YoY to 3.80 MMT
  • Reported Net Profit of THB 14,070M, Core Net Profit of THB 10,578M
  • Reported EPS of THB 2.47 (LTM1Q22: 5.98) and Core EPS of THB 1.85 (LTM1Q22:4.96)
  • Record Core EBITDA Margin at 15%
Source:

Indorama Ventures Public Company Limited

Freudenberg Experts meet Sustainability (c) Freudenberg Performance Materials
Sustainable seat covers padding material by FILC
11.05.2022

Freudenberg Experts meet Sustainability

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Evolon® textiles made from recycled PET
With Evolon® RE, Freudenberg Performance Materials is presenting an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by cycling post-consumer PET bottles in-house. Evolon® RE products are available for various applications such as technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm. For high-tech wiping, lightweight Evolon® RE is now available starting from 30g/sqm. The material meets the needs of cleaning specialists for more sustainable wiping solutions. Evolon® RE offers the same high quality and material performance as all other Evolon® textiles.

Tarpaulins made from recycled raw materials presented by Mehler Texnologies®
When it comes to tarpaulins on trucks, both protection of the transport cargo and advertising for the transport company place high demands on the material. Mehler Texnologies® tarpaulin material ranks among the premium products for truck tarpaulins. The company is a pioneer in sustainable development and is showcasing POLYMAR® 8556 ECO CF. This unique material has a 25% share of recycled raw materials in the coating mass. In addition, the material is made with 100% R-PES yarns. The input materials undergo a complex separation and filtering process.

Sustainable padding material for automotive and furniture seat covers presented by FILC
FILFLEX is a soft and flexible padding layer made from nonwovens for automotive and furniture seat covers. It prevents leather from creasing and improves the dimensional stability of the seat covers. In terms of sustainability, its benefit is its 100% PET composition, making FILFLEX easy to recycle. FILFLEX offers customers easier handling during sewing and the seat covering process. End users benefit from the high seating comfort.

10.05.2022

BB Engineering shortlisted for Plastics Recycling Awards Europe

BB Engineering has been shortlisted for the Plastics Recycling Awards Europe 2022 for the category Recycling Machinery Innovation with its PET recycling line VacuFil® Visco+ for fiber-to-fiber inline recycling.

The process presented as part of the award is the combined VacuFil® Visco+ with VarioFil®. This machinery enables the textile industry to perform closed-loop inline recycling of post-consumer polyester (PET) textile waste. The given recycling technology is a thermo-mechanical recycling process optimized for the textile industry. Key component here is the liquid state polycondensation reactor, known as Visco+, to adjust the intrinsic viscosity. Compared to existing fiber recycling processes, which address rather less demanding textile applications and don’t include subsequent spinning, BBE’s solution is a whole-in-one process that enables the textile industry to perform closed-loop inline recycling of post-consumer PET fiber waste even into high-tech textile yarns with low dpf-values.

BB Engineering has been shortlisted for the Plastics Recycling Awards Europe 2022 for the category Recycling Machinery Innovation with its PET recycling line VacuFil® Visco+ for fiber-to-fiber inline recycling.

The process presented as part of the award is the combined VacuFil® Visco+ with VarioFil®. This machinery enables the textile industry to perform closed-loop inline recycling of post-consumer polyester (PET) textile waste. The given recycling technology is a thermo-mechanical recycling process optimized for the textile industry. Key component here is the liquid state polycondensation reactor, known as Visco+, to adjust the intrinsic viscosity. Compared to existing fiber recycling processes, which address rather less demanding textile applications and don’t include subsequent spinning, BBE’s solution is a whole-in-one process that enables the textile industry to perform closed-loop inline recycling of post-consumer PET fiber waste even into high-tech textile yarns with low dpf-values.

The Plastics Recycling Awards Europe 2022 winners will be announced on 23 June, during the second day of the Plastics Recycling Show Europe taking place at the RAI Amsterdam.

(c) Beaulieu International Group
05.05.2022

B.I.G. Yarns at Clerkenwell Design Week with carpet tile collections

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns continues to extend its ranges to reduce fossil-carbon in the industry and encourage greater product circularity. Its EqoCycle PA6 yarns incorporate recycled content originating from recycled and regenerated PA6 and are fully recyclable, improving resource efficiency and other environmental benefits throughout the value chain. Carpet tufters can also contribute to a sustainable future through less use of fossil resources and reduced greenhouse gas emissions with EqoBalance yarns. Both ranges offer the same high-quality performance as virgin-based yarns.

Source:

Beaulieu International Group / EMG

(c) Indorama Ventures Public Company Limited
22.04.2022

Indorama Ventures completes acquisition of packaging company in Vietnam

Indorama Ventures Public Company Limited (IVL) completed the acquisition of Ngoc Nghia Industry – Service – Trading Joint Stock Company (NN), one of Vietnam’s leading PET packaging companies. The acquisition will boost IVL's market position as it continues to expand its integrated offering of PET products to major multinational customers throughout the region.

Ngoc Nghia is a trusted market leader in PET, preforms and closures, with long-term partnerships with major global and Vietnamese brands in the beverage and non-beverage industries. It has four manufacturing facilities in Vietnam's north and south with a total production capacity of 5.5 billion units of PET preforms, bottles, and closures, totaling 76,000 tons of PET conversion each year.

Indorama Ventures Public Company Limited (IVL) completed the acquisition of Ngoc Nghia Industry – Service – Trading Joint Stock Company (NN), one of Vietnam’s leading PET packaging companies. The acquisition will boost IVL's market position as it continues to expand its integrated offering of PET products to major multinational customers throughout the region.

Ngoc Nghia is a trusted market leader in PET, preforms and closures, with long-term partnerships with major global and Vietnamese brands in the beverage and non-beverage industries. It has four manufacturing facilities in Vietnam's north and south with a total production capacity of 5.5 billion units of PET preforms, bottles, and closures, totaling 76,000 tons of PET conversion each year.

IVL plans to sustainably grow the business to better serve customers in Vietnam, a high-growth new market, as well as IVL’s major PET packaging customers across the region including global household beverage brands. Ngoc Nghia’s family business roots, led by its founder for over 30 years, was integral to IVL’s decision to invest in the company as a strategic match. The existing team’s extensive local market knowledge will be further augmented by leadership from IVL’s PET packaging business unit, bringing a powerful combination of local, regional and global expertise to the market.

Source:

Indorama Ventures Public Company Limited

(c) Hologenix, LLC
11.04.2022

Hologenix® receives recognition for pure white CELLIANT

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Hologenix® announces that its newest innovation has achieved two recognitions. In addition to being a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24, pure white CELLIANT has been shortlisted in the Drapers Sustainable Fashion 2022 Awards. The company is sharing the spotlight with recognized brands such as H&M, Sweaty Betty and Timberland. According to Drapers, the leading authority on fashion retailing in the UK since 1887, which sponsors these awards annually, this year they received the most entries ever, making them very competitive.

To create pure white CELLIANT rPET fiber, Hologenix developed a strategic partnership with the Ireland-based Wellman International Limited, a fully owned subsidiary of Indorama Ventures. Indorama Ventures is investing $1.5 billion on sustainability initiatives, allowing them to recycle 50 billion PET bottles globally by 2025 to support the growth of the circular economy. Wellman International has been a pioneer of recycling technologies for almost 50 years, offering specialist solutions for the medical, hygiene, automotive, home care and apparel sectors.  

Pure white CELLIANT rPET fiber is sustainably manufactured, with a low-impact supply chain. It is achieved by embedding bioceramic materials, that are naturally derived and ethically sourced, into fibers, yarns and fabrics. Wellman International has converted 100% of pure white CELLIANT Polyester production into rPET. This conversion to rPET has been implemented across all CELLIANT product categories, replacing traditional polyester and dramatically enhancing CELLIANT’s sustainability initiatives.

Pure white CELLIANT is recognized as a Class 1 medical device in the European Union and is able to carry the CE mark. Like CELLIANT, pure white CELLIANT captures and converts body heat into infrared energy, powering bio-responsive textiles. This energy is reflected back to the body, resulting in increased local circulation and cellular oxygenation. These advantages have a variety of wellness benefits, including stronger performance, faster recovery and better sleep, as well as many functional properties such as thermoregulation, quick-dry properties and odor inhibition.  

Wellman International distributes pure white CELLIANT fibers across Europe, the Middle East, Africa, Asia and the USA.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

Photo: Erema
07.04.2022

EREMA: New R&D centre for innovative recycling technologies

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

However, there is not just one recycling solution for all types of plastic waste, but rather different solutions depending on the type of plastic, the product and the application intended for the recycled plastic. While some plastics processing loops, such as for PET bottles, have already been closed, many other plastic waste streams still require a great deal of R&D in cooperation with everyone involved in the value chain to produce recycled pellets that meet the very highest standards for the production of new products. More space will be available for this in the new centre.

R&D is decentralised at EREMA. In recent years, approximately 5 percent of turnover was reinvested annually in research and development. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology, and special technologies with a view to further improving the quality of recycled pellets. They also focus on new recycling technologies for waste plastic materials for which there is currently no satisfactory circular economy solution. The decisive factor here is also to exploit the potential of digitalisation. By collecting and analysing machine data, not only can recycling processes and product quality be further improved, but we can also develop our digital service offering for our customers. Such offerings include customer-specific information tools that feature plant and process data, predictive maintenance and online support as well as commissioning via remote access.

For material tests, which are necessary for research and development work, an expanded machine park will be available following completion of the new R&D centre. Here, the recycling process can be evaluated end-to-end, including upstream and downstream processes such as shredding and further processing of the recycled pellets. The material tests are supported by detailed analysis in the professionally equipped laboratory, which will be relocated to the new premises and upgraded where necessary with the very latest lab equipment.

More information:
EREMA plastics recycling
Source:

EREMA Engineering Recycling Maschinen und Anlagen GmbH