From the Sector

Reset
12 results
Santoni finalizes Acquisition of Terrot (c) Santoni / Terrot
22.11.2023

Santoni finalizes Acquisition of Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Seeking to meet rising demand for high-end circular knitting products, Santoni has pursued an Ecosystem Strategy in recent years, aiming to unify a highly fragmented industry and enhance innovation, sustainability and digitalization to more effectively meet market needs. The deployment of both parties' latest innovation practices, textile automation offerings, integrated enterprise services, C2M solutions, and a platform for designers "Materialliance", will allow Santoni Shanghai and Terrot to connect and bridge demand and offer of circular knitted products.

By incorporating Terrot's offerings, particularly in the double jersey and jacquard sector, Santoni stands to gain a competitive edge in offering machines known for their performance, low maintenance, and cost-effectiveness. Highlighting this shift is Terrot's UCC 572-T, a transfer jacquard machine for sports and leisurewear.

Following the acquisition, Terrot will continue to operate under the leadership of managing directors Robert W. Czajkowski and Dirk Lange. Santoni plans to maintain Terrot’s headquarters in Chemnitz, Germany, along with its facilities, brands, and practices.

Source:

Terrot GmbH

Adient presented seating innovations at IAA (c) Adient
11.10.2023

Adient presented seating innovations at IAA

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Responding to the need for overall cost and complexity reduction in manufacturing, the Pure Essential seat is especially lightweight. Environmentally-conscious practices such as material separation and recycling, and design for disassembly are embedded into the manufacturing process from the development stage. The visionary seat consists of two materials only – green steel and recyclable polyester (PET).
 
New customer needs in terms of premium comfort are met with the Autonomous Elegance seat, specifically developed to fit Advanced Driver Assistance Systems (ADAS). State-of-the-art findings on ergonomics and human body kinematics have been incorporated following extensive occupant research. They are complemented by advanced comfort assets such as noise cancellation and advanced climate functions. “Our seat demonstrators provide solutions to our customers’ main concerns, and we are looking forward to continuing the strategic product dialogue with them, based on our new demonstrators” highlights David Herberg, Vice President Engineering Adient EMEA. Most features of the seat can already be offered for sourcing, such as the metal structure and seat kinematics (adjustment functions and mechanisms).

Considering optimized use of space as well as sustainability aspects, the automotive supplier has also given its Smart Efficiency seat an update: the seat features a slimmer appearance than its predecessor without compromising on comfort. This design does not only help save space, but also paves the way for new mobility concepts based on battery packaging in electric vehicles.
 
The showcased products will be available for demonstration in customer roadshows as of December 2023.

Source:

Adient

Santoni Shanghai acquires German circular knitting machinery maker Terrot (c) Santoni / Terrot
13.09.2023

Santoni Shanghai acquires German circular knitting machinery maker Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Source:

Terrot GmbH

18.08.2023

Indorama Ventures: Performance Summary of 2Q23

  • Revenue of US$4B, a decline of 1% QoQ and 27% YoY
  • Reported EBITDA of US$321M, an increase of 7% QoQ and decrease of 68% YOY
  • Operating cash flows of US$491M
  • Net Operating Debt to Equity of 0.95x
  • Reported EPS of THB 0.04

Indorama Ventures Public Company Limited (IVL) reported marginally improved quarterly earnings as the company’s inherent advantages and continued focus on improving competitiveness helped bolster its business amid a continued weak operating environment.

  • Revenue of US$4B, a decline of 1% QoQ and 27% YoY
  • Reported EBITDA of US$321M, an increase of 7% QoQ and decrease of 68% YOY
  • Operating cash flows of US$491M
  • Net Operating Debt to Equity of 0.95x
  • Reported EPS of THB 0.04

Indorama Ventures Public Company Limited (IVL) reported marginally improved quarterly earnings as the company’s inherent advantages and continued focus on improving competitiveness helped bolster its business amid a continued weak operating environment.

Indorama Ventures achieved Reported EBITDA of $321 million in 2Q23, an increase of 7% QoQ and a decline of 68% YoY. Sales volumes remained resilient, rising 4% QoQ, amid continued destocking in the global chemicals industry from its peak in 4Q last year. Management is taking steps to conserve cash and safeguard the company’s competitive advantages as the global industry is impacted by increased capacity and lower margins with China boosting exports to offset muted domestic demand. Measures include redoubling efforts to reduce working capital and capex targeting $500 million of cash savings this year, optimizing the company’s European manufacturing footprint, and continued focus on Project Olympus, digitalization, and organizational enhancement.

Volumes are expected to improve in the second half of the year, with all three of Indorama Ventures’ business segments benefiting from the management measures and a gradual improvement in the outlook for the industry. Combined PET, the company’s largest segment, posted Reported EBITDA of $194 million, a 37% increase QoQ as destocking eased in most markets and supported stable volumes. Sales volumes are expected to grow in the second half of the year as manufacturing is optimized in Europe and expansion projects ramp up in India.

Fibers segment achieved Reported EBITDA of $20 million, a decrease of 37% QoQ, impacted by lower margins in the Lifestyle vertical and weak demand for Hygiene products in Europe. Volumes are expected to improve as manufacturing in Europe is optimized and expansion projects come online in the U.S and India. Mobility fibers volumes will see improvement in line with increasing automotive demand. Integrated Oxides and Derivatives (IOD) segment posted a 27% decline in QoQ Reported EBITDA to $94 million amid destocking in Crop Solutions market. Volumes will continue to be supported by reducing levels of destocking in the downstream portfolio.

Source:

Indorama Ventures Public Company Limited

Photo: Calderdale College
02.08.2023

BTMA: Apprenticeship Training Course for Textile Engineering Technicians in UK

West Yorkshire is to have a first-of-its-kind apprenticeship training course for textile engineering technicians, reflecting a resurgence in the industry locally, and more generally in the UK.

Calderdale College has partnered with the Textile Centre of Excellence (TCoE) and the British Textile Machinery Association (BTMA) to develop the bespoke Level 3 apprenticeship course which will start in September 2023.

Engineering Technician apprentices at Calderdale College will receive training from the TCoE, helping them to develop the engineering maintenance skills required to close the skills gap in West Yorkshire’s textile industry.

While the region has been a flourishing hub for textile excellence since the 19th century and is being revitalised through digitalization and the localisation of supply chains, its success is currently being hindered by an ageing workforce and high staff turnover.

West Yorkshire is to have a first-of-its-kind apprenticeship training course for textile engineering technicians, reflecting a resurgence in the industry locally, and more generally in the UK.

Calderdale College has partnered with the Textile Centre of Excellence (TCoE) and the British Textile Machinery Association (BTMA) to develop the bespoke Level 3 apprenticeship course which will start in September 2023.

Engineering Technician apprentices at Calderdale College will receive training from the TCoE, helping them to develop the engineering maintenance skills required to close the skills gap in West Yorkshire’s textile industry.

While the region has been a flourishing hub for textile excellence since the 19th century and is being revitalised through digitalization and the localisation of supply chains, its success is currently being hindered by an ageing workforce and high staff turnover.

Through adapting the engineering training at Calderdale College to address the current requirements of the textile industry, the unique new course will ensure the passing on of vital know-how and good practice aligned with the new skills demanded by Industry 4.0 and automation.

Collaborative Apprenticeships
Calderdale College has developed the programme over a two-year period through close collaboration with the TCoE and the BTMA, as well as through consultation with British heritage weaver AW Hainsworth and a number of other local textile companies.

The course launch follows on closely from the success of the Collaborative Apprenticeships project launched in 2022 at Calderdale College. To date, this has seen the college engage with over 100 local employers on the benefits of increasing the quantity and improving the quality of the apprenticeships that they offer, as well as encouraging others to introduce apprenticeships for the first time.

“Over the years, we’ve seen how beneficial apprenticeships can be for several sectors, particularly in terms of helping businesses to retain staff and ensuring that they have a steady flow of skilled workers coming in,” said Claire Williams, head of employer engagement at Calderdale College. “Having identified that employers in the textile manufacturing industry were struggling to find apprenticeship training that was designed around their needs, we knew that alongside employers and our partners, we needed to satisfy this critical gap in the market. We hope that this programme will act as a leading example for the rest of the industry to follow.”

Source:

British Textile Machinery Association

Archroma and swatchbook collaborate to deliver digital colors to fashion designers Photo: Archroma
07.07.2023

Archroma and swatchbook collaborate to deliver digital colors to fashion designers

Archroma is bringing the entire portfolio of 5,760 Archroma Color Atlas colors to swatchbook, a platform for material digitalization and sourcing.

The new partnership provides fashion, apparel and textile designers and manufacturers with an elevated standard for color accuracy that meets the needs of today’s increasingly technology-driven and integrated supply chain. This will help the textile and fashion community to improve sustainability, whilst lowering costs and shortening turnaround times.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Designers will use the 5,760 Archroma Color Atlas colors on swatchbook to rapidly develop accurate digital colorways and visualize their final product. They can then share these digital swatches with their manufacturing partners, providing access to the swatchbook metadata, which can include information such as the materials’ composition, weight and color.

Archroma is bringing the entire portfolio of 5,760 Archroma Color Atlas colors to swatchbook, a platform for material digitalization and sourcing.

The new partnership provides fashion, apparel and textile designers and manufacturers with an elevated standard for color accuracy that meets the needs of today’s increasingly technology-driven and integrated supply chain. This will help the textile and fashion community to improve sustainability, whilst lowering costs and shortening turnaround times.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Designers will use the 5,760 Archroma Color Atlas colors on swatchbook to rapidly develop accurate digital colorways and visualize their final product. They can then share these digital swatches with their manufacturing partners, providing access to the swatchbook metadata, which can include information such as the materials’ composition, weight and color.

This will streamline the overall design and production process for color-critical fashion and textile products, allowing for faster turnaround. Digital materials supported by trusted coloration technology also reduce the need for samples and eliminate physical swatchbooks, bringing environmental benefits and lower costs to brands and suppliers.

All 5,760 Color Atlas by Archroma® colors are now available free of charge to subscribers on the swatchbook platform.

24.05.2023

SGL Carbon SE: Annual General Meeting 2023

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

Source:

SGL Carbon SE

Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

29.06.2022

Start of registrations for A+A 2023

Exhibiting companies can now register for A+A 2023! The world's leading trade fair and congress event for personal protection, occupational safety and health at work will take place in Düsseldorf from 24 to 27 October 2023.

Under the motto "People count", numerous exhibitors will present innovative solutions and concepts for safe and healthy working at A+A 2023. This time, the thematic umbrella of the international trade fair is formed by the megatrends of digitalisation and sustainability.

Decision-makers and experts will find cross-sector solutions and answers to the important questions surrounding a safe, healthy and sustainable workplace. From personal protective equipment (PPE), operational fire protection, environmental protection or disaster prevention to offers for ergonomic and healthy workplace design.

The focus will be on topics such as sustainability and the circular economy of products, digital services in the provision, care and storage of PPE, mobile working, exoskeletons (wearable robots) and wearables. Forums and side events as well as an innovative Start-up Zone complement the trade fair and set new, future-oriented impulses.

Exhibiting companies can now register for A+A 2023! The world's leading trade fair and congress event for personal protection, occupational safety and health at work will take place in Düsseldorf from 24 to 27 October 2023.

Under the motto "People count", numerous exhibitors will present innovative solutions and concepts for safe and healthy working at A+A 2023. This time, the thematic umbrella of the international trade fair is formed by the megatrends of digitalisation and sustainability.

Decision-makers and experts will find cross-sector solutions and answers to the important questions surrounding a safe, healthy and sustainable workplace. From personal protective equipment (PPE), operational fire protection, environmental protection or disaster prevention to offers for ergonomic and healthy workplace design.

The focus will be on topics such as sustainability and the circular economy of products, digital services in the provision, care and storage of PPE, mobile working, exoskeletons (wearable robots) and wearables. Forums and side events as well as an innovative Start-up Zone complement the trade fair and set new, future-oriented impulses.

For more information and registration click here.

Source:

Messe Düsseldorf GmbH

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Oerlikon Barmag celebrates its 100th anniversary (c) Oerlikon Barmag
A look at the state-of-the-art assembly of a WINGS winder
30.03.2022

Oerlikon Barmag celebrates its 100th anniversary

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

SHIMA SEIKI to Exhibit at Pitti Filati 89 (c) SHIMA SEIKI
18.06.2021

SHIMA SEIKI to Exhibit at Pitti Filati 89

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of a leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 89th edition of the Pitti Immagine Filati exhibition in Florence, Italy from the 28th till the 30th of June. Because this edition of Pitti Filati will be a fusion of physical venue and online exhibit via Pitti Connect, increased importance is sure to be placed upon digitalization in the presentation of yarn.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI is presenting new online services at Pitti Filati. APEXFiz™ is SHIMA SEIKI’s first subscription-based design software and yarnbank™ a digital yarn sourcing web service for the knitting industry.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of a leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 89th edition of the Pitti Immagine Filati exhibition in Florence, Italy from the 28th till the 30th of June. Because this edition of Pitti Filati will be a fusion of physical venue and online exhibit via Pitti Connect, increased importance is sure to be placed upon digitalization in the presentation of yarn.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI is presenting new online services at Pitti Filati. APEXFiz™ is SHIMA SEIKI’s first subscription-based design software and yarnbank™ a digital yarn sourcing web service for the knitting industry.

APEXFiz™ is the latest addition to SHIMA SEIKI’s proven SDS®-onE APEX series design system lineup, but with a big departure from the past. Whereas previous APEX-series design systems were offered as an all-in-one hardware/software package, for the first time in its nearly 40 years of design system development, SHIMA SEIKI has released its new APEXFiz™ as subscription-based design software that can be installed on customers’ individual computers. Maintaining proven functions that have made the APEX series so popular with fashion designers, with APEXFiz™ those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain. APEXFiz™ is furthermore available in 5 different product variations that can be selected according to the customer’s needs, from APEXFiz™ Design Jr. to APEXFiz™ Design Pro.

APEXFiz™ is supported by another web service to enhance its user experience even more. yarnbank™ is one of the world's first online platforms for searching and downloading digitized yarns, developed in cooperation with yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz™, avoiding the need to scan yarn on their own.

Source:

SHIMA SEIKI