From the Sector

June 1, the European Parliament has adopted its Report on an EU Strategy for Sustainable and Circular Textiles. The Report wants to step up the EU’s ambition towards sustainability and circularity even further, but it has failed to recognise the strategic role of the European textile industry to scale up sustainability, nor to appreciate the global competitive threat which our companies are facing.

Director General Dirk Vantyghem commented on the MEP Report: “We welcome the strong interest of the European Parliament in the textile and fashion industry, but encourage MEPs to develop a balanced vision which reconciles sustainability and competitiveness. Developing a new business model for our industry requires carefully crafted legislation at global level, and an open dialogue between the industry, the brands and the consumer.”

EURATEX supports the EU Textile Strategy, as it was presented over a year ago by the European Commission. The 160.000 European textile companies are committed to invest in sustainability, develop new circular business models and produce high quality textile products – not just in fashion, but also in home and medical textiles, construction, agriculture or cars. To do so, indeed a new regulatory framework is needed, with clear definitions, coherent rules and effective controls. But also, the companies should be able to comply with these rules and remain globally competitive.

The EP Report has failed to respect that balance between sustainability and competitiveness. Instead, it suggests even more rules and restrictions, totally disregarding the current economic challenges caused by high energy prices, loss in consumer confidence and assertive trade partners. Putting the bar even higher will simply mean that the European textile industry will be pushed out of the market, resulting in a bigger environmental footprint and increased dependency on foreign supplies. Quite the opposite of what the EU wants to achieve with its open strategic autonomy plans.

The Report also fails to differentiate between textile products. There is a mix up between fashion and technical textiles, between products made in Europe and outside, between high quality and durable products and low-quality items. It is regretful that the European Parliament did not make that distinction and simply refers to “textiles” as a general cause of concern, without acknowledging e.g. the high quality products, made by European textile and fashion companies.

The Report puts a strong responsibility on the supply side – the industry and the brands – and does not sufficiently address the role of the consumer. Initiatives therefore are essential to create a stronger demand for sustainable textiles, which includes better communication and transparency (avoid greenwashing), fiscal measures, green public procurement and better control of online marketplaces.

On a positive note, the EP Report does recognise the importance to invest in research and innovation, to support reskilling and upskilling, the need of scaling up circular economy and pay attention to the needs of SMEs. EURATEX has always insisted that such massive transition can only be successful if accompanied by significant and dedicated support programmes. The EU Textiles Transition Pathway should offer a clear perspective in this regard.

The National Council of Textile Organizations (NCTO) commends the Senate for passing the Fiscal Year 2023 National Defense Authorization Act (NDAA), which includes a key provision aimed at spurring more government procurement of domestically produced essential products, providing a significant benefit to the U.S. textile industry.

“We applaud the Senate for getting the NDAA across the finish line today, and we are pleased the legislation will now go to President Biden for his signature,” said NCTO President and CEO Kim Glas. “The underlying NDAA conference report includes a critical bill known as the Homeland Procurement Reform (HOPR) Act, which establishes specific criteria that the Department of Homeland Security (DHS) must meet to procure more domestically manufactured uniforms, footwear, and related critical items by DHS agencies.”

“NCTO sincerely thanks the Warrior Protection and Readiness Coalition (WPRC) and the coalition of industry and labor groups who helped secure inclusion of the HOPR Act in the NDAA,” Glas said. “This common-sense bill will ensure that key divisions of the DHS can procure American-made critical uniforms and protective equipment to support the execution and enforcement of their missions.”

Glas added, “The importance of the domestic textile industry and a warm industrial base was heightened during the pandemic when the industry pivoted overnight to retool production lines to address severe shortages of lifesaving products. That experience demonstrated how imperative it is to build and expand a permanent domestic manufacturing base for our country’s health and national security. The HOPR Act is poised to provide a greatly needed demand signal to the U.S. manufacturing industry for expanded government procurement of American-made essential items, ranging from uniforms to footwear and body armor and helmets. It is a step in the right direction to further safeguard our national security from unreliable foreign supply chains in China and other countries for essential materials.”

Once signed into law, the new HOPR provisions will go into effect in 180 days.

Today, March 30, the European Commission released its long-awaited Strategy for Sustainable Textile, with the ambition to move the sector towards the path of sustainability. EURATEX welcomes the EU ambitions to act on sustainable textiles and investments, in order to change how textiles are made, chosen and recovered, but calls for a smart and realistic implementation. Many European companies have already chosen this path, therefore the strategy should support them in this process, especially considering today’s energy crisis.

The strategy recognises the strategic importance of textiles, which are not only used as apparel or furniture, but applied in cars, medical equipment, agriculture, etc. It acknowledges the European Industry pro-active initiatives to tackle microplastics, to solve challenges of market surveillance and the skills needs. More cooperation is needed for re-use and recycling of textiles and to set up an EU market for secondary raw materials. On this last point, EURATEX ReHubs initiative is developing proposals to size EPR potential, to transform waste into value, and create a new capacity and jobs.

The proposed “transition pathways”, which will translate the strategy into action, will be critical in this respect: how will these sustainability targets be reached, what will the cost for SMEs be, how can companies be supported in that green transition, what about the impact on global competitiveness? These are essential questions to be addressed in the coming months.
The Textile strategy is part of much broader package, including as many as 16 new legislative actions and other policies which will directly impact on textile value chain. In particular the Sustainable Product Initiative Regulation released on March, 30 includes game-changing provisions on Digital Product Passport, Eco-Design, SMEs and Green Public Procurement.  The Regulation has an overwhelming ambition and, to be realistic, it would require a new way of joint working between institutions and business, and which builds on lessons learned on data flow across value chains, interoperability, conformity assessment and effective measures to support SMEs.

If wrongly implemented, such an unprecedented wave may cause a complete collapse of the European textile value chain under the burden of restrictions, requirements, costs and unlevel playing field. On the contrary, the changes ahead can boom the entire textile ecosystem and create a model of successful green and digital transition in manufacturing, which starts in Europe and expands globally.

Already in 2019, EURATEX asked policy makers to work together and remove barriers to circular economy, solve the market surveillance paradox in which laws are made but not checked, and to help create scale economies to make sustainable textiles affordable, hence the norm.

For example, there are 28 billion products circulating per year in EU, which is an impressive task for market surveillance authorities including customs. EURATEX has been stressing non-sufficient market surveillance and it is actively working on solutions for a fair and effective market surveillance of textile products through Reach4Textiles. EURATEX very much welcomes that the European Commission recognizes our work and the need for market surveillance by establishing more harmonised efforts in the EU.

EURATEX also welcomes the establishment of the Digital Product Passport. It has a high potential to improve every step in the textile value chain, from design and manufacturing to recycling and purchasing. At the same time, EURATEX calls the co-legislators to take into account the role of SME’s in this transition and to put forward pragmatic initiatives, supporting SME’s across the EU in a systematic approach.

Alberto Paccanelli, EURATEX President, concludes: EURATEX calls for true cooperation with all policy makers and other stakeholders across the value chains to advise, pressure-test and use this opportunity for a successful transition. Our ambition must be to reconcile sustainability, resilience and competitiveness; we know it can be done”.

Since 11 February 2022, the Industrievereinigung Chemiefaser e. V. (IVC) has been listed in the German Lobby Register under registration number R000411. German Parliament decided in March 2021 to introduce the register.

Following various cases of suspected corruption and the rather poor marks by Transparency International for the German federal states in a lobby ranking, calls for greater transparency had grown louder. The Lobby Register Act came into force on 1 January 2022 after it had been agreed by the political parties of CDU/CSU and SPD in long negotiations. Now the act obliges professional lobbyists to make an entry in the publicly accessible register, providing details about their clients and financial expenditure.

Since the IVC has already been registered in the European Transparency Register for several years on a voluntary basis, the Frankfurt-based industry association of major man-made fibre manufacturers in Germany, Austria and Switzerland is in favour of all initiatives that lead to more transparency in lobbying.

According to IVC's 1^st Chairman Klaus Holz (managing director of Trevira GmbH), the IVC sees the existing act as a first step towards strengthening the acceptance of organisations which seek and maintain political contacts. Holz deplores that many gaps and exemptions remain at the time being. He emphasizes: "It is up to the German legislator to bring about equal treatment of every stakeholder in the political arena in Berlin as quickly as possible, so that all those involved can meet on an equal footing."

Dr. Wilhelm Rauch, managing director of the IVC, adds: "We are also active on behalf of our industry throughout Europe for all issues relating to environmental protection and REACH. Therefore, it is essential for our work to know which organisations and persons we encounter in these efforts."

NCTO President and CEO Kim Glas testified at a hearing on “Supporting U.S. Workers, Businesses, and the Environment in the Face of Unfair Chinese Trade Practices” before the House Ways and Means Trade Subcommittee.

In written testimony submitted to the committee, Glas outlines China’s rise to dominance of global textile and apparel production and its adverse impact on the U.S. textile industry, details ways to strengthen onshoring and nearshoring of supply chains, and provides recommendations on the critical policies needed to address these illegal trade practices and rectify inequities.

“China holds the dubious distinction of being the world’s leading purveyor of illegal trade practices that are designed to unfairly bolster a blatantly export-oriented economy,” NCTO President and CEO Kim Glas says. “These predatory practices take many forms, from macroeconomic policies that grant across-the-board advantages to their manufacturers, to industry specific programs intended to dominate global markets in targeted areas. The U.S. textile industry has been a longstanding victim of China’s predatory export practices.”

“China’s virtually unlimited and unrealistic pricing power coupled with its subsidies and lack of enforceable labor and environmental standards strips benefits and undermines policy objectives throughout the U.S. free trade and preference program structure,” Glas further notes.

“A program of maximum pressure must be developed and fully enforced to reconfigure textile and apparel sourcing patterns that currently place an unhealthy and heavily weighted dependance on China,” Glas adds. “With a strong trade policy holding China accountable, the opportunities are ripe to unlock further domestic and regional investment to bolster this critical textile and apparel production chain because of the important rules of origin for this sector.  We can nearshore more production, help address the migration crisis, and assist in addressing the urgent issue of climate change and create a win-win-win for workers in the United States, workers in the region, and consumers.”

Glas outlines key policy recommendations to the committee, including:

• Enact tax incentives and other targeted critical investments to strengthen Western Hemisphere trade relationships and re-shore manufacturing
• Close the Section 321 De Minimis Tariff Loophole
• Step up enforcement of forced labor of Uyghurs and others in the Xinjiang Uyghur Autonomous Region (XUAR)
• Firmly maintain Section 301 penalty duties on China for finished textiles and apparel products
• Immediately pass the MTB to help manufacturers with a limited list of critical inputs not made in the U.S. and review/close the mechanism in the MTB renewal which allows for finished products
• Strengthen buy-American practices for PPE and other essential products
• Block expansion of the Generalized System of Preferences (GSP) to include textile and apparel products
• Use trade enforcement in free trade agreements to mitigate transshipment schemes by unscrupulous importers seeking to illegally circumvent duties

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement welcoming House passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for face masks, isolation gowns and other personal protective equipment (PPE).

“We commend the House for getting the bipartisan infrastructure bill across the finish line today, and we are pleased the legislation will now go to President Biden for his signature. This is the first step in a long-term strategy that is critically needed to permanently onshore PPE production to ensure our nation is prepared for the next health security crisis,” said NCTO President and CEO Kim Glas. “This infrastructure package will help incentivize the reshoring of PPE production by guaranteeing long-term federal contracts and expanding Berry Amendment rules to more federal agencies’ purchases of PPE products, important priorities of the U.S. textile industry.”

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant (containing 100 percent domestic content); guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

Economic data for 2020 in EURATEX Spring Report show preoccupying trends. Figures reflect a dramatic contraction in demand and production: EU turnover contracted by -9.3% in textiles (which is in line with the general manufacturing average) and by -17.7% in clothing, compared with 2019. Furthermore, supply chain disruptions and substantial price increases of some raw materials are putting significant pressure on the T&C industries across Europe. The trade deficit for European textiles and clothing jumped from € -47 bln in 2019 to € -62 bln in 2020, an increase of more than 30%, which is almost entirely due to the import of Chinese face masks and related products. Fortunately, more recent figures from the 1st quarter of 2021 indicate some signs of recovery.

That figure illustrates very well today’s political discussions on the future of the European industry. Many European companies have made considerable efforts to adapt their production to the pandemic, but clearly this was not enough. Whether the production cost in Europe is too high or the EU should adapt its procurement rules, the industry needs have a coherent long-term plan to become more competitive and conquer new markets.

EURATEX General Assembly highlighted the critical role of the new EU Industrial Strategy. The inclusion of textiles and clothing in the fourteen ecosystems is a step in the right direction to consolidate the industrial base but we should look also at the global challenges. European companies should continue investing in innovation, design and quality, in combination with a structural move towards more sustainable textiles. At the same time, the EU should create an environment - both inside the Single Market and globally - where everybody plays by the same rules.

• Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
• In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

Launched in mid-2019, APR’s blockchain-based Follow Our Fibre allows customers and stakeholders to scan its viscose product with a user-friendly app to access data that traces the product’s journey from plant nursery to viscose manufacturing and on to seaports. In October 2019, APR announced a collaboration with TrusTrace to integrate Follow Our Fibre with the latter’s T-Trace module. This helps connect APR’s upstream data to downstream textile value chain actors such as yarn and fabric customers and fashion brands.

More recently, a sustainability dashboard tracking key mill environmental performance indicators has been added to Follow Our Fibre. The dashboard presents APR’s performance in its first year of operations where a baseline has been established for quarterly tracking, reporting and continuous improvement.
The performance indicators follow key industry standards being set by ZDHC for Man-Made Cellulosic Fibres (MMCF), as well as the European Union Best Available Technologies (EU BAT).

Emphasis on Process, Third-party Validation and Outcome-based Testing

Angelica, one of the nation’s largest healthcare linen providers, now has 23 laundries that have earned the Hygienically Clean Healthcare certification. This is reflective of  their commitment to Best Management Practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Angelica’s locations are throughout the United States, and the laundries now carrying the certification are located in Phoenix, AZ; Colton, Fresno, Los Angeles, Orange, Pittsburg, Pomona, and Sacramento, CA; Holly Hill and Safety Harbor, FL; Rockmart, GA; Chicago, IL; Somerville and Worcester, MA; Durham, NC; Henderson, NV; Batavia, NY; Lorain, OH; Pawtucket, RI; Columbia, SC; Ooltewah, TN; and Dallas and Houston, TX.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.
Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Angelica on their certifications,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundries take every step possible to prevent human illness.”