From the Sector

Reset
17 results
Oerlikon Luxury at LINEAPELLE Photo: Oerlikon
22.09.2023

Oerlikon Luxury at LINEAPELLE

The new business unit Oerlikon Luxury showcased at LINEAPELLE a new selection of accessories for the fashion industry.

Oerlikon Riri and Oerlikon Fineparts are the brands under this newly-created BU –part of the Oerlikon Group’s Surface Solutions Division since the acquisition of Riri Group in March. Oerlikon Riri offers zippers and buttons that will continue to be branded Riri and Cobrax respectively and will continue to deliver the guaranteed quality and reliability recognized by the whole industry. Oerlikon Fineparts offers a comprehensive portfolio of metal components and fashion jewels, including the products from the previously known brands Coeurdor, Amom, DMC and CMH.

Leveraging Oerlikon’s technology expertise in advanced and environmentally-friendly coatings, the latest FW 24/25 collection from the Group’s luxury product brand Oerlikon Riri include pieces coated using PVD1 (Physical Vapour Deposition), as well as further specialisation in several materials, including stainless steel.

The new business unit Oerlikon Luxury showcased at LINEAPELLE a new selection of accessories for the fashion industry.

Oerlikon Riri and Oerlikon Fineparts are the brands under this newly-created BU –part of the Oerlikon Group’s Surface Solutions Division since the acquisition of Riri Group in March. Oerlikon Riri offers zippers and buttons that will continue to be branded Riri and Cobrax respectively and will continue to deliver the guaranteed quality and reliability recognized by the whole industry. Oerlikon Fineparts offers a comprehensive portfolio of metal components and fashion jewels, including the products from the previously known brands Coeurdor, Amom, DMC and CMH.

Leveraging Oerlikon’s technology expertise in advanced and environmentally-friendly coatings, the latest FW 24/25 collection from the Group’s luxury product brand Oerlikon Riri include pieces coated using PVD1 (Physical Vapour Deposition), as well as further specialisation in several materials, including stainless steel.

Source:

Oerlikon / Menabò Group srl

Oerlikon
01.03.2023

Riri joins Oerlikon Group - Acquisition Completed

  • Oerlikon takes leadership position in luxury metalware

Oerlikon has successfully closed the acquisition of Riri, following the signing of the agreement announced on December 16, 2022.

Riri is a provider of coated metal accessories for the luxury fashion industry. This deal is the strategic next step to complement Oerlikon’s acquisition of Coeurdor in 2021. It expands Oerlikon’s foothold in the luxury market and together creates a leading platform in luxury metalware. As the demand for PVD coatings grows, Oerlikon’s PVD technologies that provide environmentally friendly solutions will accelerate the shift of the luxury goods industry to greener PVD technology.

Renato Usoni, CEO of Riri, will lead the newly formed luxury business unit of Oerlikon as President Oerlikon Luxury. Riri will operate as a separate business within the Surface Solutions division. Its zippers and buttons will continue to use the Riri and Cobrax brands on individual products. Oerlikon will consolidate Riri as of March 1, 2023.

  • Oerlikon takes leadership position in luxury metalware

Oerlikon has successfully closed the acquisition of Riri, following the signing of the agreement announced on December 16, 2022.

Riri is a provider of coated metal accessories for the luxury fashion industry. This deal is the strategic next step to complement Oerlikon’s acquisition of Coeurdor in 2021. It expands Oerlikon’s foothold in the luxury market and together creates a leading platform in luxury metalware. As the demand for PVD coatings grows, Oerlikon’s PVD technologies that provide environmentally friendly solutions will accelerate the shift of the luxury goods industry to greener PVD technology.

Renato Usoni, CEO of Riri, will lead the newly formed luxury business unit of Oerlikon as President Oerlikon Luxury. Riri will operate as a separate business within the Surface Solutions division. Its zippers and buttons will continue to use the Riri and Cobrax brands on individual products. Oerlikon will consolidate Riri as of March 1, 2023.

Source:

OC Oerlikon Management AG

(c) COBRA International Co.,Ltd
24.05.2022

New Report by COBRA details Innovations in Windsurfing

Cobra International has launched an innovation report highlighting its key composite manufacturing innovations that have reshaped the Windsurfing industry.
Having first begun building windsurf boards in 1978, Cobra continues to drive technology development in the sport and 44 years later, manufactures approximately 80% of the world’s composite windsurf boards. Manufacturing for leading brands such as Fanatic, Starboard, Naish, RRD, JP and Quatro Goya, Cobra has consistently evolved and improved the construction and finishes of the boards that it builds, balancing stiffness, comfort, weight, strength, durability, and aesthetics.
Cobra’s report details key manufacturing innovations including:

Cobra International has launched an innovation report highlighting its key composite manufacturing innovations that have reshaped the Windsurfing industry.
Having first begun building windsurf boards in 1978, Cobra continues to drive technology development in the sport and 44 years later, manufactures approximately 80% of the world’s composite windsurf boards. Manufacturing for leading brands such as Fanatic, Starboard, Naish, RRD, JP and Quatro Goya, Cobra has consistently evolved and improved the construction and finishes of the boards that it builds, balancing stiffness, comfort, weight, strength, durability, and aesthetics.
Cobra’s report details key manufacturing innovations including:

  • The introduction of its innovative vacuum moulding technique that Cobra perfected just as the popularity of the sport exploded.
  • The manufacture of its own composite EPS forming moulds producing strong, watertight cores that are ready to use in production directly from the mould.
  • The mass production of sandwich boards with thermoformed PVC foam wrapped around the rails, increasing the board’s strength whilst keeping weight to a minimum.
  • Seamless rail construction
  • High-volume manufacturing capacity optimized for the finest prepreg carbon foils satisfying the current demand for windsurf foiling equipment
  • Development programs with on of the world’s leading carbon fibre fabric producers to create ever lighter biaxial fabrics.

“As we set aside time during the pandemic to upskill, innovate, and look to the future, it was also important that we referred back to our key technology successes. This got us thinking about so many of our developments which led us to create this innovation report. Customers can draw great confidence from the fact that the Cobra team is always working on tomorrow’s next generation product as well as building exceptional quality into each of today’s boards.” Bruce Wylie, CCO, Cobra International

More information:
COBRA carbon fibers biaxial
Source:

COBRA International Co.,Ltd / 100 % Marketing

(c) Cobra International
26.04.2022

COBRA International: Highlights Diversification into New Market Sectors at JEC World 2022

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Sustainability Options for Automotive and Watersports
Sustainability has a been a key focus for the Cobra Waterports division and CAC, the Cobra automotive business unit. At JEC World 2022, Cobra will showcase the increasing material and process options it has developed with both bio-resin and natural fibre reinforcements variants presented alongside more traditional carbon fibre parts.

Visitors will be able to get up close to a new Bio SUP Wingfoil board featuring a basalt, flax, bamboo and GreenPoxy bio-epoxy construction created for partners NSP, as well as state-of-the-art compression moulded prepreg foils. Cobra’s first fully recyclable surfboard incorporating the Recyclamine® resin technology that Cobra was recognised for in the 2020 JEC Innovation Awards will also be on display alongside a new Audi e-tron foil by Aerofoils – the world’s safest electric hydrofoil board.

The CAC team (Automotive Business Unit of Cobra) will present a set of OEM mirror cap parts that showcase a range of carbon SMC, woven visual carbon, pure woven visual flax, hybrid flax-carbon and painted flax construction options for the same component.  Clear carbon aesthetic and structural parts including CAC made M-carbon components for the BMW S 1000 RR Motorcycle will furthermore underline the high quality and eye-for-detail for which CAC is renowned.

Carbon Prosthetics
An entirely new composite application for the company, Cobra will also show two composite prosthetic devices at JEC which were productionised by the in-house design and development team. Working alongside a leading Thai university and a medical device OEM, Cobra created a rapid and cost effective series production process for a lightweight carbon fibre prosthetic foot. In another example of lightweight composites creating major quality of life improvements, Cobra has also designed and manufactured a carbon and glass fibre prepreg foot support for Elysium Industries.

More information:
COBRA Composites UAV
Source:

Cobra International

(c) COBRA International
12.04.2022

COBRA International showcases its portfolio for vehicle systems at AUVSI XPONENTIAL 2022

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

At AUVSI XPONENTIAL, Cobra will also illustrate how the company leverages innovation and expertise developed in its water sports and automotive business to enhance its product offering to the UAV sector. Products on display include a Fliteboard electric foiling surfboard, pre-preg hydrofoil parts, lightweight medical prosthetics, flax and forged carbon parts, as well as a full set of visual carbon and painted automotive trims, each demonstrating the company’s high volume production capacity for ultra-light carbon composite structures.

The show will take place from the 25 to 28 April at the Orange County Convention Center, Orlando, Florida.

Source:

COBRA International / 100% Marketing

Cobra
05.04.2022

COBRA to Sponsor and Manufacture JEC Trophies

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

The 2022 trophies are designed and produced by Cobra’s Design and Development department - the in house team that supports Cobra’s mass production operations with specialist expertise in product design, industrial design & prototyping. The sweeping curves of the trophies are influenced by perfume bottles, linking back to JEC’s French cultural heritage.  The design also combines a pallet of different materials to symbolise the JEC Group’s complete coverage of the composites sector. Acrylic, upcycled teak production waste from the furniture industry, Innegra™, flax, carbon, and aramid materials have been combined with Sicomin’s GreenPoxy 33 bio-resin to reference the award programme’s combined focus on innovation and sustainability.

The JEC Composites Innovation Awards are presented annually, recognising, and rewarding the most cutting-edge and ingenious projects that exploit the full potential of composite materials. Over the last 20 years, the JEC Composites Innovation and Startup programs have celebrated both innovation and partnership. The JEC Group will announce the winners for the 2022 JEC Composites Innovation awards on April 26th in Paris and in live streaming, and the Start-up Booster winners on May 3rd at JEC World.

“Cobra is delighted to reinforce its partnership with JEC Group, sponsoring and manufacturing the JEC trophies for 2022,” comments Danu Chotikapanich, CEO, Cobra.  “These are two of the most prestigious and respected awards programs within the composites industry and one that also matches Cobra’s ongoing commitment to innovation and sustainability improvements. Working with the latest bio resin technology, natural fibre reinforcements and upcycled composite and wood production waste materials our Design and Development team have created some stunning trophies for this year’s award season.”

Source:

COBRA International Co.,Ltd.

(c) Riri Group
Stones & Gold
01.09.2021

Riri Group’s FW 2022-23 collection: Creativity, innovation, sustainability

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

Looking to the new season with a positive and enthusiastic attitude, the Group continues to work towards an increasing sustainability when it comes to products and processes. The collection, in fact, is a further step toward Riri’s path of green responsibility that the company has taken to bring actual improvement in its sustainable performance. This year, Riri Group published its first Sustainability Report, calculated in compliance with Global Reporting Initiative Standard (GRI), and adopted recycled polyester as production standard for zips’ tapes.

Biophilic
A way to honor love for life, this line emphasizes the importance of physical and mental wellbeing, answering the questions raised during the challenges faced in the last year. Balance with nature becomes a concrete product circularity operation resorting to manufacturing processes with a low environmental impact and to organic and biodegradable materials. Among them stands out recycled polyester for zips which is Global Recycled Standard (GRS) certified, Global Organic Textile Standard certified organic cotton and other alternative fibers, such as nettle, a natural resource that is a great alternative to synthetic fibers. Rivets, zips, buttons and metal components are made of stainless steel, which guarantees durability and resistance, 100% recycled copper and aluminum – light, ductile and resistant to oxidation. Among the most interesting solutions are rice peel powder – used on buttons’ overseals – and eco-sustainable thermoplastic polyurethane, obtained from renewable raw sources.

Stones & Gold
Sophistication and advanced craftsmanship mark the pieces of this creative path which, inspired by goldsmith and glyptic craft tradition, reveals a delicate sense of positivity and richness. Gems, lapis lazuli, marble, and mother-of-pearl are protagonists of a refined selection of accessories designed to amaze and catch the eye, resembling actual jewels. Essential the use of gold, especially in its liquid form: dominating zips and buttons’ finishes, this precious and versatile metal becomes a decorative feature on printed tape.

Industrial luxe
The third proposal embodies the unique style and timeless elegance that have always defined Riri’s products, embellishing them with new engineering details which makes them very relevant. The accessories come with golden and black finishes, both glossy and matt, and explore shapes developed to bring life to a range of luxury accessories with a sophisticated industrial aesthetics. A dominating role goes to stainless steel, along with a selection of impactful and elegant tapes which includes jacquard options, for a retro-futuristic look that is revealed also through the use of mechanical elements, such as screws and etched metal sheets, and in the clean and boxy shapes of pullers and buttons.

Source:

Menabò Group for Riri Group

COBRA continues Its Partnership with Fliteboard (c) COBRA
11.07.2021

COBRA continues Its Partnership with Fliteboard

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

Fliteboard’s first composite models used a carbon fibre and Innegra sandwich laminate over a moulded EPS foam core, combining maximum strength, stiffness, and durability with a low overall board weight. The same construction concept is used for the Series 2 boards, with several new finishes added to the range along with lighter colour matched EVA deck pads and upgraded latches on the carbon fibre board lid. New wood grain and metallic paint finishes have been introduced with COBRA’s semi-transparent paint system used to save weight and display the stunning hexagonal weave pattern of the carbon and Innegra reinforcement fabrics.

Source:

COBRA / 100% Marketing

COBRA provides high-quality mass production for ARE Tahiti’s new composite canoes (c) COBRA
23.11.2020

COBRA provides high-quality mass production for ARE Tahiti’s new composite canoes

Cobra International, Chonburi, Thailand: COBRA International, one of the world’s largest OEM manufacturers of composite goods for Water Sports, Automotive, Marine and Civil Engineering, is pleased to confirm the shipment of its first 36 composite canoes to ARE Tahiti.

COBRA has collaborated with leading outrigger canoe brand ARE Tahiti to mass produce its new OC-1 canoe, ‘Mana’. Designed by former professional windsurfer Baptiste Gossein  (JP Australia and Neil Pryde), ‘Mana’ features a closed deck on which the paddler sits on top of the hull. Available in two models; a hybrid version weighing 12kg, using an 80:20 mix of E-glass and carbon fibre reinforcement fabrics, and the PRO model – a weight optimized, ultra-light, full carbon version that weighs as little as 9kg.   

“We required the best in composite construction for both models, a stunning final finish and a build rate that could keep up with our growing order book”, comments Baptiste Gossein.

Cobra International, Chonburi, Thailand: COBRA International, one of the world’s largest OEM manufacturers of composite goods for Water Sports, Automotive, Marine and Civil Engineering, is pleased to confirm the shipment of its first 36 composite canoes to ARE Tahiti.

COBRA has collaborated with leading outrigger canoe brand ARE Tahiti to mass produce its new OC-1 canoe, ‘Mana’. Designed by former professional windsurfer Baptiste Gossein  (JP Australia and Neil Pryde), ‘Mana’ features a closed deck on which the paddler sits on top of the hull. Available in two models; a hybrid version weighing 12kg, using an 80:20 mix of E-glass and carbon fibre reinforcement fabrics, and the PRO model – a weight optimized, ultra-light, full carbon version that weighs as little as 9kg.   

“We required the best in composite construction for both models, a stunning final finish and a build rate that could keep up with our growing order book”, comments Baptiste Gossein.

As with all of COBRA’s watersports’ projects, a perfect master model formed the basis of the mass production tooling and two sets of composite hull tooling were taken from the master plug allowing a build rate of up to 50 OC-1 canoes per month.

For the lay-up and construction process, COBRA’s high-performance PVC foam sandwich windsurf board construction provided a solid starting point.  Having selected vacuum consolidated epoxy wet layup for the mix of woven and stitched biaxial reinforcements, COBRA was able to build down to the customer’s weight target with the absolute minimum of waste and additional consumables.  Top and bottom sections of the hull were moulded separately then bonded together, with the smaller outrigger hull – known as the ‘ama’ – produced in the same way.  Prepreg carbon fibre and in-house split mould tooling was also used for the two ‘Iakos’ - the two cross beams that join the ama to the main hull. 

An in-mould applied finish coat was then used for the hybrid OC-1 while the PRO carbon fibre model benefits from COBRA’s ultra-light paint system.

“COBRA is able to provide mass production capability and rapid new model turnaround, as well as delivering consistently high quality. We are delighted with the first COBRA built OC-1s and have received exceptionally positive feedback from both customers and racers” comments Baptiste Gossein.

The next ARE project to enter mass production at COBRA will be the V-1 canoe. Similar to the OC-1 but an open boat that the paddler sits inside, the V-1 will have no rudder or steering system, requiring more finesse to manage underway.

“The OC-1 outrigger canoe is a superb example of our customer focused approach to production process development.  By working closely with Baptiste and the ARE team, COBRA is able to provide mass production capability and a rapid new model turnaround, as well as delivering consistently high quality.  This is a sector in which we expect to see significant expansion over the next few years”, comments Danu Chotikapanich, CEO, COBRA International.

Riri Group boosts its offer with Cobrax Metal Hub. (c) Riri Group
RIRI GROUP Cobrax Metal Hub
12.11.2020

Riri Group boosts its offer with Cobrax Metal Hub.

  • The new company in the Group is dedicated to metal accessories for luxury and haute couture, in the heart of the Tuscan fashion district.

Mendrisio – Another important milestone has been reached at Riri: the incorporation of Cobrax Metal Hub, the new company in the Group which specialises in the design, development and manufacturing of metal components for the luxury and haute couture sector. The company’s headquarters are in the heart of the Tuscan fashion district, combining high quality Made in Italy, decades-long expertise and the care for details which has always characterised Riri.

  • The new company in the Group is dedicated to metal accessories for luxury and haute couture, in the heart of the Tuscan fashion district.

Mendrisio – Another important milestone has been reached at Riri: the incorporation of Cobrax Metal Hub, the new company in the Group which specialises in the design, development and manufacturing of metal components for the luxury and haute couture sector. The company’s headquarters are in the heart of the Tuscan fashion district, combining high quality Made in Italy, decades-long expertise and the care for details which has always characterised Riri.

The new company is a result of the acquisition of 2Frame, a historical Italian brand in the industry, which is now an integral part of the Riri family, under the new name Cobrax Metal Hub. Thanks to this new entry, the Swiss Group has become the first sole supplier of metal accessories for the leatherwear industry, adding to its traditional range of zips and buttons a new line of products which includes all types of fastening, padlocks, snap hooks and buckles. It is an actual strategic hub, to offer the brands a single contact point for any needs and requests concerning metal accessories.

This new acquisition also makes it possible for Riri to respond, in an even faster and more effective way, to the demand for developing new articles and prototypes. By focusing on customer needs, Cobrax Metal Hub is actually able to design and develop customised products, guaranteeing continuous support in all process phases: from the search for materials, to technical and finishing solutions, the prototyping and sampling stage, to the industrialisation and manufacturing stage.

Renato Usoni, CEO at Riri Group adds: “Thanks to Cobrax Metal Hub the Riri Group has become the first sole supplier of accessories for the leatherwear sector. It is a project intended to add value and increase the company’s ability to serve its market, providing increasingly comprehensive and tailor-made answers, bearing witness to a vision whereby investing in the future is the best response to the scenarios, more complex than ever before, with which the whole market is confronted today”.

Source:

Menabò Group

Meet the new FW 21-22 Riri Group collection (c) Riri Group
Over Shock
13.10.2020

Meet the new FW 21-22 Riri Group collection

  • Technology, creativity and sustainability
  • Recycled materials, bright colours, eclectic shapes: excellence is in the details, and the new creations by the Italian-Swiss group have plenty to say.

Mendrisio – Looking at the new Fall-Winter 2021-2022 collection of the Riri Group, it almost seems as if the difficult months to which the pandemic has forced the whole world, have been another new – though unwanted – challenge for the Italian-Swiss company. A testbed that sparked the mind and lit the fire of creativity. Therefore, today, the brand ingredient which for over 80 years has embellished the
garments designed by major fashion system brands with top-quality zips and buttons, also introduces a wide range of heterogeneous creations, intended to cover different aesthetic and functional requirements on the market.

This collection has been divided into three macro-topics; it is a new chapter in the history of the Group.

  • Technology, creativity and sustainability
  • Recycled materials, bright colours, eclectic shapes: excellence is in the details, and the new creations by the Italian-Swiss group have plenty to say.

Mendrisio – Looking at the new Fall-Winter 2021-2022 collection of the Riri Group, it almost seems as if the difficult months to which the pandemic has forced the whole world, have been another new – though unwanted – challenge for the Italian-Swiss company. A testbed that sparked the mind and lit the fire of creativity. Therefore, today, the brand ingredient which for over 80 years has embellished the
garments designed by major fashion system brands with top-quality zips and buttons, also introduces a wide range of heterogeneous creations, intended to cover different aesthetic and functional requirements on the market.

This collection has been divided into three macro-topics; it is a new chapter in the history of the Group.

LIFE SERVING
Keyword: sustainability. Or, more romantically, “Reuse with love”. From the use of materials produced using organic waste and recycled plastics to actual destocking – the re-introduction on the market of unsold items to give them new life through a restyled shape: the topic of “life serving”, for Riri, translates into the meticulous and constant search for materials with a low environmental impact and in the committed attempt to reduce the use of plastic to a minimum. This is why the Group has decided to use recycled polyester tapes, made with new organic cotton, pullers coated with cork, created using 100% recycled plastics or rubber taken from the sole of shoes. Stainless steel – an exceptionally resistant and sturdy material, as well being subject to no galvanic treatments and highly recyclable – characterizes chains and pullers, while the Nylon zip consists of fully recycled tape and chain, and Decor introduces a new 100% polyamide version. On the button side, “life serving” includes buttons with a cork coating, the Zero button with coating made of recycled Meryl polyamide and the F4 with a 100% recycled Nylon head and the heads made of APILON 52 (rubber made of 65% vegetable oils and energy from renewable sources) coated with microfiber from the company Alcantara.

ENGINEERING
This is definitely the most rigorous yet progressive section in the collection, drawing on technological innovation and on uncertainties related to the current situation, to play with shapes, colours and materials. Between zips and buttons there is a prevalence of squared and minimal shapes, also on the tapes of the zips through sublimation and digital printing techniques. The leading colour is grey in its variation of hues, where the insertion of coloured tones sometimes stands out. The leading material, on the other hand, is metal.

OVER SHOCK
A creative topic where “exaggeration” is the keyword, a trend whose style and character somehow remind us of Gen-Z, apart from being especially suitable for outdoors. “Over state” uses the hip hop mood and settings of the Nineties, taking them to the extreme, enlarging shapes and focusing on bright and fluorescent colours such as purple, yellow, blue, orange or green. An example of this is Storm Evo, a zip which is popular in the outdoor sector for its high levels of water resistance and strength, which features a new electric blue chain and tape with reflecting side strips. Also outstanding in terms of originality is the new purple puller, with its anti-theft shape, fixed onto a fluorescent yellow chain. The perfect expression of this category are zippers such as Decor, Nylon and Aquazip, especially recommended for the outdoor sector in general.

COLLECTION HIGHLIGHTS: RESTYLING AND INNOVATION
All the macro-categories selected for the FW 21-22 seasons are included in some special product innovations, most notably the even more minimal and thin shapes of some buttons and the introduction of five different colours for the small synthetic ring, a real point of strength in Cobrax pressure buttons. Also the range of magnetic buttons is complemented by the addition of two extra snaps. As regards zips, the Riri Group team has been working on careful restyling of shapes, more specifically in the shapes of Decor zip bodies – ideal for the luggage industry – further improved from both an aesthetic and functional viewpoint.

More information:
Fashion Mode Riri Group
Source:

Menabò Group

RIRI and COEURDOR join forces
RIRI and COEURDOR join forces
14.02.2020

RIRI and COEURDOR join forces

Riri and Coeurdor announce that they are creating the largest metal accessories group dedicated to the high-end luxury brands. The combination of the two companies will result in a unique value proposition, offering the full range of metal trims. This will allow luxury brands to simplify their supply-chain and benefit from unique innovation capabilities, including new technology like 3D printing and stainless steel. They will also rely on a production network that spans from France, Italy, Switzerland to Portugal, offering maximum flexibility and security of supply adapted to the fashion market requirements.

Founded in 1951 and headquartered in Maîche (France), Coeurdor is a manufacturer of metal accessories for the luxury industry. The company is specialized in surface finishings and manufacture of metal products for Luxury leather goods, with production facilities in France and Portugal. The company is well-known for the quality of its products, its innovation capabilities and strong customer relationships.

Riri and Coeurdor announce that they are creating the largest metal accessories group dedicated to the high-end luxury brands. The combination of the two companies will result in a unique value proposition, offering the full range of metal trims. This will allow luxury brands to simplify their supply-chain and benefit from unique innovation capabilities, including new technology like 3D printing and stainless steel. They will also rely on a production network that spans from France, Italy, Switzerland to Portugal, offering maximum flexibility and security of supply adapted to the fashion market requirements.

Founded in 1951 and headquartered in Maîche (France), Coeurdor is a manufacturer of metal accessories for the luxury industry. The company is specialized in surface finishings and manufacture of metal products for Luxury leather goods, with production facilities in France and Portugal. The company is well-known for the quality of its products, its innovation capabilities and strong customer relationships.

Founded in 1936 and headquartered in Mendrisio (Switzerland), Riri is a well-known brand, producing zippers and buttons, through Riri and Cobrax brands, mostly for the high-end luxury market. Riri is the privileged choice of many brands in light of high quality of the creations released season after season, ever-ending effort in terms of innovation, personalization of details and high service levels. The company has a world commercial presence, with commercial offices in Paris, New York City, Los Angeles, Hong Kong and Shanghai and four manufacturing sites across Switzerland and Italy.

Robert Jeambrun, Chairman of Coeurdor said: “We are very excited to open this new chapter of our history together with Riri. We believe the two organizations share the same values, including a focus on innovation and dedication to high service levels for our customers. Crossing our path with Riri will enable us to continue our growth story and increase our financial means, becoming the supplier of choice of high-end luxury brands.”

Renato Usoni, CEO of Riri Group said: “We are welcoming the Coeurdor family. The alliance of the two groups will create a new leader in the market with a unique business model and industrial means capable of supplying all metal pieces needed by our clients, from zippers to buttons and metal trims, all at once. The combined offering will be highly synergetic and will allow our clients to better industrialize their supply chains and benefit from unique innovation capabilities.”

More information:
Riri Group coeurdor
Source:

menabo

(c) Cobra International
12.11.2019

COBRA International announces manufacturing partnership with Skeeta Foiling Craft

COBRA International, one of the world’s largest OEM manufacturers of composite products, is proud to announce its partnership with Skeeta Foiling Craft to build the new range of hydro foiling dinghies. Skeeta Foiling Craft, founded by father and son team Jim and David French, have been refining their unique concept for a simple, accessible hydro foiling dinghy in Australia since 2015. In collaboration with Dr Ian Ward’s Glide Free hydrofoil technology, Skeeta Foiling Craftdeveloped the 3.66m Skeeta and 2.9m Nikki dinghies that are available in both foiling and displacement sailing configurations, maximising the thrill of foiling in a versatile package that the whole family can use.

COBRA International, one of the world’s largest OEM manufacturers of composite products, is proud to announce its partnership with Skeeta Foiling Craft to build the new range of hydro foiling dinghies. Skeeta Foiling Craft, founded by father and son team Jim and David French, have been refining their unique concept for a simple, accessible hydro foiling dinghy in Australia since 2015. In collaboration with Dr Ian Ward’s Glide Free hydrofoil technology, Skeeta Foiling Craftdeveloped the 3.66m Skeeta and 2.9m Nikki dinghies that are available in both foiling and displacement sailing configurations, maximising the thrill of foiling in a versatile package that the whole family can use.

Jim French was determined to build the Skeeta hull using an expanded polystyrene (EPS) foam core and the single shot closed mould epoxy lamination process pioneered by the windsurf board market, making COBRA International the perfect build partner for series production. Skeeta Foiling Craft first contacted COBRA back in early 2016, when the company started developing initial hull production materials and processes that could match their targets for lightweight, durable and cost-effective construction.

More information:
COBRA Skeeta
Source:

100percentmarketing

(c) COBRA
15.10.2019

COBRA to deliver composite parts for body shell cladding of security robot

COBRA International is collaborating with Obodroid, a leading Thai robotics provider to help bring their novel new building security robot concept to life. With the robotic systems already in place, COBRA will deliver a set of eight composite parts that form the lightweight body shell cladding of the streamlined 1.35m high robot.

Having been involved from the very outset of the project: from the design and engineering through to the prototyping of the composite robot shell parts, COBRA will start with the production of the first batch of robots in 2020.

By using cameras and sensors integrated into robots, building operators can provide more effective and flexible security monitoring systems, providing a 24/7 autonomous patrol service around the residential area.

COBRA International is collaborating with Obodroid, a leading Thai robotics provider to help bring their novel new building security robot concept to life. With the robotic systems already in place, COBRA will deliver a set of eight composite parts that form the lightweight body shell cladding of the streamlined 1.35m high robot.

Having been involved from the very outset of the project: from the design and engineering through to the prototyping of the composite robot shell parts, COBRA will start with the production of the first batch of robots in 2020.

By using cameras and sensors integrated into robots, building operators can provide more effective and flexible security monitoring systems, providing a 24/7 autonomous patrol service around the residential area.

More information:
COBRA Roboter
Source:

100percentmarketing

Tiger Drone (c) COBRA International / HG Robotics
19.09.2019

COBRA delivers first 100 composite fuselage covers for cutting-edge drones

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

More information:
glass fibers COBRA
Source:

COBRA International Ltd,

(c) JEC Group
21.11.2018

Celebration of Composite Materials at the 11th JEC Asia

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

More information:
JEC-Gruppe
Source:

JEC Group

CHOMARAT receives a JEC Innovation Award in Seoul with C-PLY™ ©CHOMARAT
27.10.2017

CHOMARAT receives a JEC Innovation Award in Seoul with C-PLY™

At JEC Asia 2017 (1-3 November), the international textile group CHOMARAT will receive a JEC Innovation Award in the Sports & Leisure category for its C-PLY™ Hexagonal with visual & structural stitching. “CHOMARAT provided NEILPRYDE and COBRA with its C-PLY™ Non-Crimp Fabric (NCF) technology to help them manufacture an innovative windfoil board, and we are very proud to be rewarded with our partners”, says Pascal JOUBERT DES OUCHES, Sports Equipment Market Director at CHOMARAT.

C-PLYTM HEXAGONAL COMBINES NEW CARBON LOOK AND PERFORMANCE

At JEC Asia 2017 (1-3 November), the international textile group CHOMARAT will receive a JEC Innovation Award in the Sports & Leisure category for its C-PLY™ Hexagonal with visual & structural stitching. “CHOMARAT provided NEILPRYDE and COBRA with its C-PLY™ Non-Crimp Fabric (NCF) technology to help them manufacture an innovative windfoil board, and we are very proud to be rewarded with our partners”, says Pascal JOUBERT DES OUCHES, Sports Equipment Market Director at CHOMARAT.

C-PLYTM HEXAGONAL COMBINES NEW CARBON LOOK AND PERFORMANCE

The unusual stitching of this carbon multiaxial NCF reinforcement combines visual appeal and mechanical performance. C-PLY™ Hexagonal is an innovative carbon NCF with a unique stitching yarn designed to be visible within the resin and to capture resin colour pigments. The stitching yarn also improves fracture toughness compared to standard NCF.
“We researched the right stitching yarn among multiple options before coming up with a tailor-made yarn solution. C-PLY™ Hexagonal provides a unique honeycomb carbon design that appeals to end users”, adds Philippe SANIAL, R&T Director at CHOMARAT.

A WIDE RANGE, FROM AERONAUTICS AND AUTOMOTIVE TO SPORTS & LEISURE APPLICATIONS

Originally dedicated to the design of aerospace and automotive parts, the concept is now successfully applied to the sports & leisure sector. In this innovative windfoil board construction, tows are spread to create thin plies, which are then stitched with precise ±45° angles. The C-PLY™ NCF structure respects the fibre alignment and is optimized in terms of fibre angles and ply weights, thanks to unique spreading technology. The result is a leading-edge carbon NCF reinforcement allowing structural design benefits, premium surface quality and overall parts cost savings. “Bringing a new carbon visual signature for our high-performance C-PLY™ range of NCF is a key to boost retail sales in the whole sports & consumers product industry”, concludes Pascal JOUBERT DES OUCHES.

More information:
CHOMARAT JEC Award
Source:

Agence APOCOPE