From the Sector

Reset
282 results
DITF: CO2-negative construction with new composite material Photo: DITF
Structure of the wall element
20.03.2024

DITF: CO2-negative construction with new composite material

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO2 balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO2 balance of the new building material is actually negative, making it possible to construct CO2-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO2 storage, which plays a significant role in the CO2 balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO2 balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO2 balance of 157 CO2 equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

Source:

Deutsche Institute für Textil- und Faserforschung

Robot system (c) STFI
20.03.2024

STFI: Highlights of textile research at Techtextil 2024

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

From the field of sustainable products and solutions, a sleeping bag with bio-based and therefore vegan filling material and a natural fibre-based composite element for furniture construction, in which LEDs and capacitive proximity sensors for contactless function control have been applied using embroidery technology, will be on show. Printed heating conductor structures demonstrate current research work for the e-mobility of the future, as the individually controllable seat and interior heating should ultimately reduce weight and save energy compared to conventional heating systems.

While a protective suit for special task forces protects against the dangers of a Molotov cocktail attack, a shin guard and a knee brace with patellar ring illustrate the process combination of 3D printing and UV LED cross-linking. Other highlights from lightweight textile construction include the rib of a vertical rudder of an Airbus A320 and a green snowboard made from recycled carbon fibres.

More information:
STFI Techtextil Smart textiles
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

13.03.2024

IDEA®25: Call for abstracts

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

  • Natural Fibers (Cotton, Hemp, Bamboo, Banana, Wood Pulp, Regenerated Cellulose, Wool, Fur, Chitin, Feathers)
  • Polymers (Biopolymers, Regenerated and Recycled polymers, Unconventional and Alternatives to Traditional Polymers)
  • Sustainable Chemistries (finishes, lubricants, adhesives, and additives)

INNOVATIONS IN SUSTAINABILITY

  • Process Improvements with Sustainability Impact (reduced waste, reduced energy, reduced water consumption)
  • Product Design Improvements with Sustainability Impact (lightweighting, designs for end-of-life, “good enough” design)

END-OF-LIFE SOLUTIONS

  • End-of-Life or Next-Life Considerations (compostability, biodegradability, recycling, advanced recycling and circularity)
  • Presenting is an opportunity for technical professionals to showcase pioneering research, innovative solutions, and expert insights with technology scouts.

Abstracts must be submitted via the INDA website by June 7, 2024.

Source:

INDA - Association of the Nonwoven Fabrics Industry

06.03.2024

SHIMA SEIKI at FIMEC 2024 in Brazil

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

More information:
Shima Seiki FIMEC shoes Brazil
Source:

SHIMA SEIKI MFG., LTD

05.03.2024

Denim Expert's Goal: 100% wastewater recycling

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

Denim Expert's proactive approach to sustainability has been recognized on a global scale. The company has been named 'New Champion' by the World Economic Forum and has partnered with organizations such as the Sustainable Apparel Coalition (SAC), the United Nations Framework Convention on Climate Change (UNFCCC), and the Ellen MacArthur Foundation's Jeans Redesign program. As one of the first factories to join the Partnership for Cleaner Textile (PaCT) and in the process of implementing the 3E program, Denim Expert is dedicated to achieving 100% water reuse and full reliance on solar energy, further solidifying its commitment to driving positive environmental change.

KARL MAYER GROUP: Natural fibre composites and knit to shape products at JEC World 2024 (c) FUSE GmbH
26.02.2024

KARL MAYER GROUP: Natural fibre composites and knit to shape products at JEC World 2024

At this year's JEC World 2024 from 5 to 7 March, KARL MAYER GROUP will be exhibiting with KARL MAYER Technical Textiles and its STOLL Business

One focus of the exhibition will be non-crimp fabrics and tapes made from bio-based yarn materials for the reinforcement of composites.

"While our business with multiaxial and spreading technology for processing conventional technical fibres such as carbon or glass continues to do well, we are seeing increasing interest in the processing of natural fibres into composites. That's why we have a new product in our trade fair luggage for the upcoming JEC World: an alpine ski in which, among other things, hemp fibre fabrics have been used," reveals Hagen Lotzmann, Vice President Sales KARL MAYER Technische Textilien.

The winter sports equipment is the result of a subsidised project. The hemp tapes for this were supplied by FUSE GmbH and processed into non-crimp fabrics on the COP MAX 5 multiaxial warp knitting machine in the KARL MAYER Technical Textiles technical centre.

At this year's JEC World 2024 from 5 to 7 March, KARL MAYER GROUP will be exhibiting with KARL MAYER Technical Textiles and its STOLL Business

One focus of the exhibition will be non-crimp fabrics and tapes made from bio-based yarn materials for the reinforcement of composites.

"While our business with multiaxial and spreading technology for processing conventional technical fibres such as carbon or glass continues to do well, we are seeing increasing interest in the processing of natural fibres into composites. That's why we have a new product in our trade fair luggage for the upcoming JEC World: an alpine ski in which, among other things, hemp fibre fabrics have been used," reveals Hagen Lotzmann, Vice President Sales KARL MAYER Technische Textilien.

The winter sports equipment is the result of a subsidised project. The hemp tapes for this were supplied by FUSE GmbH and processed into non-crimp fabrics on the COP MAX 5 multiaxial warp knitting machine in the KARL MAYER Technical Textiles technical centre.

The STOLL Business Unit will be focussing on thermoplastic materials. Several knit to shape parts with a textile outer surface and a hardened inner surface will be on display. The double-face products can be made from different types of yarn and do not need to be back-moulded for use as side door panels or housing shells, for example. In addition, the ready-to-use design saves on waste and yarn material.

DITF: Modular cutting tool recognized with JEC Composites Innovation Award Photo: Leitz
Hermann Finckh (DITF) and Andreas Kisselbach (Leitz GmbH & Co. KG)
16.02.2024

DITF: Modular cutting tool recognized with JEC Composites Innovation Award

Hermann Finckh received the JEC Composites Innovation Award in the category Equipment Machinery & Heavy Industries for the innovation MAXIMUM WEIGHT REDUCTION OF COMPOSITE TOOLS. The research team from the German Institutes of Textile and Fiber Research Denkendorf (DITF) developed a new modular cutting tool for woodworking machines, which was produced and successfully tested by the industrial partner Leitz GmbH & Co. KG.

The extremely lightweight planing tool was made from carbon fiber-reinforced plastics (CFRPs) instead of aluminum using a completely new modular construction principle. As a result, it weighs 50 percent less than conventional tools. It enables significantly higher working speed, which enables a one-and-a-half-fold increase in productivity. The development of the extreme-lightweight principle was performed by numerical simulation and every solution was virtually tested in advance. A patent application has been filed for the concept.

Hermann Finckh received the JEC Composites Innovation Award in the category Equipment Machinery & Heavy Industries for the innovation MAXIMUM WEIGHT REDUCTION OF COMPOSITE TOOLS. The research team from the German Institutes of Textile and Fiber Research Denkendorf (DITF) developed a new modular cutting tool for woodworking machines, which was produced and successfully tested by the industrial partner Leitz GmbH & Co. KG.

The extremely lightweight planing tool was made from carbon fiber-reinforced plastics (CFRPs) instead of aluminum using a completely new modular construction principle. As a result, it weighs 50 percent less than conventional tools. It enables significantly higher working speed, which enables a one-and-a-half-fold increase in productivity. The development of the extreme-lightweight principle was performed by numerical simulation and every solution was virtually tested in advance. A patent application has been filed for the concept.

Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics) © Business Angels Deutschland e. V. (BAND)
Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics)
26.01.2024

Start-up: Bio-based aerogel fibres replace synthetic insulation materials

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

"We can revolutionise the construction world with bio-based aerogel fibres," explains ITA founder Dr Sascha Schriever proudly. "If all insulation materials in construction are converted to bio-based aerogel fibres, all builders can realise their dream of a sustainable house."

SA Dynamics has come a good deal closer to its founding goal by winning the KUER.NRW 2023 business plan competition. The spin-off from Institut für Textiltechnik (ITA) and Department for Industrial Furnaces and Heat Engineering (IOB) at RWTH Aachen University is scheduled for spring 2025.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

Avery Dennison and NRVLD showcase T-shirts with AR experience (c) Avery Dennison Corporation
22.01.2024

Avery Dennison and NRVLD showcase T-shirts with AR experience

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison will be showcasing this project at NRF 2024: Retail’s Big Show, from January 14-16 at the Javits Convention Center in New York. The connected T-shirts will feature alongside a host of apparel digital solutions for supply chain visibility, product tracking, and consumer engagement.

Michael Colarossi, vice president, innovation, product line management and sustainability, Apparel Solutions, Avery Dennison comments: “The trajectory of consumer experiences unmistakably leans towards digital, and brands are actively seeking innovative methods to engage consumers by merging traditional craftsmanship with digital creativity. In this scenario, AR acted as the conduit, and Avery Dennison's connected garment technology and on-garment Embelex branding turned that vision into tangible reality."

Pavan Bahl, founder of Bellwether Culture and co-founder NRVLD, comments: "In the Web3 sphere, blockchain technology enables ownership of digital goods and identity. Our collaboration with Avery Dennison showcases the potential of bridging this gap, illustrating the exciting possibilities in this space."

Source:

Avery Dennison Corporation

Archroma showcases Super Systems+ at Colombiatex 2024 Photo: Archroma
19.01.2024

Archroma showcases Super Systems+ at Colombiatex 2024

Archroma is showcasing its planet conscious innovations and solution systems at this year’s Colombiatex de Las Américas, being held from January 23 to 25, 2024.

Archroma is using its attendance at Colombiatex 2024 to introduce a new concept that promises to help the region’s brands and mills optimize their productivity, add value to their products and create a positive impact on the environment: Super Systems+.

The Super Systems+ solutions offer great performance, including end-product durability, while meeting sustainability targets with cleaner chemistries that comply with current and anticipated industry regulations or deliver resource savings, or both. Solutions are currently available for popular end-use segments, from denim to cotton and poly-cotton knits.

Archroma is showcasing its planet conscious innovations and solution systems at this year’s Colombiatex de Las Américas, being held from January 23 to 25, 2024.

Archroma is using its attendance at Colombiatex 2024 to introduce a new concept that promises to help the region’s brands and mills optimize their productivity, add value to their products and create a positive impact on the environment: Super Systems+.

The Super Systems+ solutions offer great performance, including end-product durability, while meeting sustainability targets with cleaner chemistries that comply with current and anticipated industry regulations or deliver resource savings, or both. Solutions are currently available for popular end-use segments, from denim to cotton and poly-cotton knits.

For black denim with a cleaner environmental footprint, brands and mills can choose DIRESUL® EVOLUTION BLACK to create unique shade and wash-down effects with an overall impact reduction of 57% compared to standard Sulfur Black 1 liquid.* For authentic blue denim, Archroma’s aniline-free** pre-reduced DENISOL® PURE INDIGO 30 LIQ produces coveted indigo colors with the same performance and efficiency as conventional indigo dye, but in a more planet-friendly way.

To embrace circularity and create natural shades on cellulosic-based fibers including cotton, kapok, linen and viscose, brand owners can now turn to Archroma’s patented EarthColors® technology. It makes high-performance biosynthetic dyes from non-edible natural waste, such as almond shells, bitter orange residues and cotton production byproducts, helping conserve natural resources. For next-generation processing of polyester and its blends, Archroma’s ERIOPON® E3-SAVE all-in-one auxiliary combines pre-scouring, dyeing and reduction clearing in a single bath to achieve substantial savings of water, energy and time.

For weather protection and stain resistance that is both economically and environmentally sustainable, Archroma Super Systems+ draw on an extensive portfolio of fluorine-free durable water repellents.

* Ecotarrae lifecycle analysis
** Below limits of detection according to industry standard test methods

Source:

Archroma

Stella McCartney X B&B Italia: Launch of iconic sofa system (c) B&B Italia
08.01.2024

Stella McCartney X B&B Italia: Launch of iconic sofa system

B&B Italia unveiled a special edition Camaleonda, the iconic sofa system by Mario Bellini, adorned in a brand-new fabric designed by Stella McCartney – platforming her S-Wave monogram. Marking the second chapter of the partnership between the British conscious luxury pioneer and the Italian design house, the collaboration was launched at Art Basel Miami Beach on 6th December 2023 as part of an installation at B&B Italia Design Studio’s grand opening. The Camaleonda is crafted from nearly entirely sustainable materials, materialising both brands’ nature-positive visions.

The partnership between B&B Italia and Stella McCartney was born of Stella’s long-time personal passion for Bellini’s works and started in 2022 with the Le Bambole armchair. It evolves now with the new version of Camaleonda, the sofa system originally designed in 1970, which made its comeback 50 years later in 2020 - speaking a contemporary language between structural solutions and sustainable choices.

B&B Italia unveiled a special edition Camaleonda, the iconic sofa system by Mario Bellini, adorned in a brand-new fabric designed by Stella McCartney – platforming her S-Wave monogram. Marking the second chapter of the partnership between the British conscious luxury pioneer and the Italian design house, the collaboration was launched at Art Basel Miami Beach on 6th December 2023 as part of an installation at B&B Italia Design Studio’s grand opening. The Camaleonda is crafted from nearly entirely sustainable materials, materialising both brands’ nature-positive visions.

The partnership between B&B Italia and Stella McCartney was born of Stella’s long-time personal passion for Bellini’s works and started in 2022 with the Le Bambole armchair. It evolves now with the new version of Camaleonda, the sofa system originally designed in 1970, which made its comeback 50 years later in 2020 - speaking a contemporary language between structural solutions and sustainable choices.

The brand-new Stella McCartney X B&B Italia Camaleonda introduces the latest printed fabric “S-Wave”, which is the result of a next-generation sustainability innovation introduced by the design company’s R&D team. The S-Wave upholstery, available in two different colours, is based on OceanSafe naNea yarn, which is verified to be biodegradable, Cradle to Cradle Certified® Gold and does not contain harmful substances. The material does not shed persistent microplastics into the environment, however, performs like conventional materials.

Source:

B&B Italia

(c) A. Monforts Textilmaschinen GmbH & Co. KG
05.01.2024

Monforts: New Stenter line installed at Curt Bauer

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

04.01.2024

The climate-friendly carbon fiber - up to 50% less CO2 emissions

SGL Carbon relies on climate-friendly manufacturing processes in the production of its own carbon fibers. By using renewable energy, the carbon footprint of SGL fiber can be reduced by up to 50% compared to a conventional fiber.  

SGL carbon fiber is produced at the Lavradio (Portugal) and Moses Lake (USA) sites. When the Moses Lake site was selected in the 1990s, the use of hydropower as an energy source played a particularly decisive role. As a result, around 75,000 tonnes of CO2 can be saved in Moses Lake by purchasing electricity from hydropower plants compared to a fossil fuel-based electricity mix.

As part of the consistent implementation of its climate strategy, SGL Carbon will be using a CO2-neutral biomass system to generate energy from the beginning of 2024, which will make the production system, which was previously based on natural gas, more flexible and climate-friendly. At full capacity, the biomass system in Lavradio can save more than 90,000 tons of CO2.

The raw material used is wood pellets, which are sourced from a radius of 250 kilometres via short transport routes.

SGL Carbon relies on climate-friendly manufacturing processes in the production of its own carbon fibers. By using renewable energy, the carbon footprint of SGL fiber can be reduced by up to 50% compared to a conventional fiber.  

SGL carbon fiber is produced at the Lavradio (Portugal) and Moses Lake (USA) sites. When the Moses Lake site was selected in the 1990s, the use of hydropower as an energy source played a particularly decisive role. As a result, around 75,000 tonnes of CO2 can be saved in Moses Lake by purchasing electricity from hydropower plants compared to a fossil fuel-based electricity mix.

As part of the consistent implementation of its climate strategy, SGL Carbon will be using a CO2-neutral biomass system to generate energy from the beginning of 2024, which will make the production system, which was previously based on natural gas, more flexible and climate-friendly. At full capacity, the biomass system in Lavradio can save more than 90,000 tons of CO2.

The raw material used is wood pellets, which are sourced from a radius of 250 kilometres via short transport routes.

The climate-friendly energy supply at the site in Moses Lake (USA) combined with the new biomass plant in Lavradio (Portugal) lead to a reduction in CO2 emissions of up to 50% in the production of SGL's own carbon fibers compared to conventional fibers. With the investment in the biomass system, SGL Carbon is pursuing its climate strategy. The target is to save 50% CO2 emissions by the end of 2025 compared to the base year 2019 and to be climate-neutral by the end of 2038. In the period 2019 to 2022, SGL Carbon has reduced its CO2 emissions by 17%.

Source:

SGL Carbon SE

Better sleep environment Photo Heiq Materials AG
28.12.2023

Biobased HeiQ technologies for better sleep at Heimtextil 2024

HeiQ’s biobased textile technologies are set to show how they can change the sleep environment for the better while meeting an increasing demand for sustainable solutions that are in tune with nature. HeiQ Skin Care, HeiQ Allergen* Tech, HeiQ Cool, and HeiQ Mint are going to be showcased at the Heimtextil show in Frankfurt beginning of January.

HeiQ presents a complete set of tailored textile technologies that is said to improve the sleeping environment: "Unlocking Better Sleep". Therefore, HeiQ introduces a range of innovative products designed to enhance the quality of a comfortable night’s rest through sustainable and biobased solutions.

HeiQ’s biobased textile technologies are set to show how they can change the sleep environment for the better while meeting an increasing demand for sustainable solutions that are in tune with nature. HeiQ Skin Care, HeiQ Allergen* Tech, HeiQ Cool, and HeiQ Mint are going to be showcased at the Heimtextil show in Frankfurt beginning of January.

HeiQ presents a complete set of tailored textile technologies that is said to improve the sleeping environment: "Unlocking Better Sleep". Therefore, HeiQ introduces a range of innovative products designed to enhance the quality of a comfortable night’s rest through sustainable and biobased solutions.

According to a recent study by the School of Architecture, Victoria University of Wellington (New Zealand), “individuals spend more than 50% of their time at home in the bedroom”. Another research from the Fatigue Countermeasures Laboratory, NASA Ames Research Center (United States), concluded that “sleep is critical to health and daytime functioning. For individuals to achieve optimal sleep, they must have access to a sleep environment that allows them to achieve quality sleep.” These are strong indicators that we should treat sleep with the highest importance that it deserves.

The flagship products leading this positive change are the 100% biobased cosmetic technology HeiQ Skin Care, the plant-based deodorizer HeiQ Mint (botanical freshness), the dual action cooling solution HeiQ Cool, and HeiQ Allergen Tech that reduces exposure to inanimate allergens through active probiotics. These biobased innovations are set to redefine the sleep experience and contribute to overall well-being.

HeiQ Skin Care is the most recent addition to HeiQ’s portfolio - a synbiotic textile finish promoting a balanced microbiome for glowing skin. Unlike conventional products, HeiQ Skin Care utilizes pre- and probiotics integrated into a biobased matrix, offering long-lasting cosmetic benefits. It is particularly suited for products that are in direct and long contact with skin, such as pillowcases, duvet covers or bed sheets, acting as a cosmetic care session during sleep.

Source:

Heiq Materials AG

Yanfeng and TactoTek partner to enhance future vehicle interior applications (c) Yanfeng
21.12.2023

Yanfeng and TactoTek partner to enhance future vehicle interior applications

Yanfeng, an automotive supplier, and TactoTek, a pioneer in smart surface technologies, will collaborate on the development of highly integrated Human Machine Interface (HMI) solutions for future Smart Cabin applications. The goal of this partnership is to combine advanced lighting, user interfaces, as well as various decorative trim with a deeply integrated product approach.

Yanfeng has made the strategic decision to integrate TactoTek's Injection Molded Structural Electronics (IMSE) portfolio as a technological layer in its worldwide Smart Cabin business. The intention is to enhance the overall user experience by offering advanced lighting features and introducing new functional elements like HMI, haptic feedback, and display integration.

This approach enables Yanfeng to align with emerging automotive industry trends, including autonomous driving, and addresses non-driving related tasks (NDRTs), thereby shaping the future of Smart Cabins and redefining the driving experience.

Yanfeng, an automotive supplier, and TactoTek, a pioneer in smart surface technologies, will collaborate on the development of highly integrated Human Machine Interface (HMI) solutions for future Smart Cabin applications. The goal of this partnership is to combine advanced lighting, user interfaces, as well as various decorative trim with a deeply integrated product approach.

Yanfeng has made the strategic decision to integrate TactoTek's Injection Molded Structural Electronics (IMSE) portfolio as a technological layer in its worldwide Smart Cabin business. The intention is to enhance the overall user experience by offering advanced lighting features and introducing new functional elements like HMI, haptic feedback, and display integration.

This approach enables Yanfeng to align with emerging automotive industry trends, including autonomous driving, and addresses non-driving related tasks (NDRTs), thereby shaping the future of Smart Cabins and redefining the driving experience.

This collaboration strives to create a unique in-vehicle user experience by accelerating seamless lighting integration into all surfaces of future vehicle interiors. The IMSE technology offers a fresh unique design and styling principles for slim, compact configurations and unconventional shapes.

Source:

Yanfeng International

15.12.2023

VIATT 2024 as the response to Vietnam's developing textile sector

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

In line with the industry’s anticipation, the country was identified as the ideal location for ASEAN’s new comprehensive textile platform for several key reasons. Vietnam’s pro-business policies, strategic geographical location, abundant labour force, and favourable trade agreements have contributed to its rise as a global textile manufacturing hub. Agreements such as the Regional Comprehensive Economic Partnership (RCEP); the Indo-Pacific Economic Framework for Prosperity (IPEF); and 15 free trade agreements (FTAs) covering over 60 countries and regions, will further enable participants from across the value chain to conduct cross-border business after connecting at next year’s show. In addition, several key travel initiatives that serve international players have been implemented, including the country’s APEC Business Travel Card programme[1], availability of e-visas to all nationalities, and visa-free travel for select countries[2].  

Exhibitors from multiple textile sub-sectors converge in February
In Vietnam’s home textile segment, rising urbanisation, emerging young consumers, and higher disposable incomes are interrelated factors driving growth[3]. Globally, three of the top trends include recycling; utilising green fibres; and the increasing use of technical fabrics for enhanced comfort and health. At the fair, confirmed home textiles exhibitors include Hanyang Eco Tex, Hohmann GmbH, Phuong Nam Feather, and SIGMA, set to showcase their most up-to-date products, covering bedding, upholstery fabrics, curtain, and sun protection.
 
Utilised for automobiles, civil aviation, construction, health care, and more, Vietnam's exports of technical textiles reached USD 676.6 million for the first nine months of 2022, up 17.1% compared to the same period in 2021[4]. This in turn bodes well for the country’s import prospects of quality machinery and equipment. Hoping to cater to domestic demand at VIATT 2024, international suppliers in this category include Julai, SIGMA, and Skwentex.

Meanwhile, apparel-related products make up the lion’s share of the country’s textile exports – according to Vietnam Textile & Apparel Association (VITAS), in 2022 these numbered USD 29.1 billion. From Ho Chi Minh to Hanoi, numerous international fashion brands have a manufacturing presence, including Adidas, H&M, Lacoste, Lululemon, Nike, The North Face, Uniqlo, and many more. At next year’s fair, exhibitors such as Avery Dennison, Lenzing, Stylem Takisada-Osaka, and Texwinca, will aim to draw the attention of apparel brands and a wide range of other domestic and international buyers.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE), covering the entire textile industry value chain.

[1] ‘Everything You Need to Know About Traveling to Vietnam with an APEC Business Travel Card’, April 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/apec-business-travel-card-vietnam.html/ (Retrieved: November 2023)
[2] ‘Vietnam Introduces E-Visa for All Nationalities from August 15, 2023’, August 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/vietnam-introduces-e-visa-for-all-nationalities-from-august-15-2023.html/ (Retrieved: November 2023)
[3] ‘Vietnam Home Textile Market Size & Share Analysis’, 2023, Mordor Intelligence, https://shorturl.at/wQVWZ (Retrieved: November 2023)
[4] ‘Vietnam's technical fabric exports continue to be positive’, October 2022, Web Portal of Supporting Industry of Vietnam, https://shorturl.at/lmnvX (Retrieved: November 2023)

Source:

Messe Frankfurt (HK) Ltd

Figure 1: Adsorption of a drop of waste oil within seconds by a leaf of the floating fern Salvinia molesta. Abbildung 1 © W. Barthlott, M. Mail/Universität Bonn
Figure 1: Adsorption of a drop of waste oil within seconds by a leaf of the floating fern Salvinia molesta.
14.12.2023

Self-driven and sustainable removal of oil spills in water using textiles

Researchers at the ITA, the University of Bonn and Heimbach GmbH have developed a new method for removing oil spills from water surfaces in an energy-saving, cost-effective way and without the use of toxic substances. The method is made possible by a technical textile that is integrated into a floating container. A single small device can remove up to 4 liters of diesel within an hour. This corresponds to about 100 m2 of oil film on a water surface.
 
Despite the steady expansion of renewable energies, global oil production, oil consumption and the risk of oil pollution have increased steadily over the last two decades. In 2022, global oil production amounted to 4.4 billion tons! Accidents often occur during the extraction, transportation and use of oil, resulting in serious and sometimes irreversible environmental pollution and harm to humans.

There are various methods for removing this oil pollution from water surfaces. However, all methods have various shortcomings that make them difficult to use and, in particular, limit the removal of oil from inland waters.

Researchers at the ITA, the University of Bonn and Heimbach GmbH have developed a new method for removing oil spills from water surfaces in an energy-saving, cost-effective way and without the use of toxic substances. The method is made possible by a technical textile that is integrated into a floating container. A single small device can remove up to 4 liters of diesel within an hour. This corresponds to about 100 m2 of oil film on a water surface.
 
Despite the steady expansion of renewable energies, global oil production, oil consumption and the risk of oil pollution have increased steadily over the last two decades. In 2022, global oil production amounted to 4.4 billion tons! Accidents often occur during the extraction, transportation and use of oil, resulting in serious and sometimes irreversible environmental pollution and harm to humans.

There are various methods for removing this oil pollution from water surfaces. However, all methods have various shortcomings that make them difficult to use and, in particular, limit the removal of oil from inland waters.

For many technical applications, unexpected solutions come from the field of biology. Millions of years of evolution led to optimized surfaces of living organisms for their interaction with the environment. Solutions - often rather unfamiliar to materials scientists and difficult to accept. The long-time routine examination of around 20,000 different species showed that there is an almost infinite variety of structures and functionalities. Some species in particular stand out for their excellent oil adsorption properties. It was shown that, e.g., leaves of the floating fern Salvinia molesta, adsorb oil, separate it from water surfaces and transport it on their surfaces (Figure 1, see also the video of the phenomon.).

The observations inspired them to transfer the effect to technical textiles for separating oil and water. The result is a superhydrophobic spacer fabric that can be produced industrially and is therefore easily scalable.

The bio-inspired textile can be integrated into a device for oil-water separation. This entire device is called a Bionic Oil Adsorber (BOA). Figure 2: Cross-section of computer-aided (CAD) model of the Bionic Oil Adsorber. The scheme shows an oil film (red) on a water surface (light blue). In the floating cotainer(gray), the textile (orange) is fixed so that it is in contact with the oil film and the end protrudes into the container. The oil is adsorbed and transported by the BOA textile. As shown in the cross-section, it enters the contain-er, where it is released again and accumulates at the bottom of the container. See also the video regarding the oil absorption on the textile, source ITA).
 
Starting from the contamination in the form of an oil film on the water surface, the separation and collection process works according to the following steps:

  • The BOA is introduced into the oil film.
  • The oil is adsorbed by the textile and separated from the water at the same time.
  • The oil is transported through the textile into the collection container.
  • The oil drips from the textile into the collection container.
  • The oil is collected until the container is emptied.

The advantage of this novel oil separation device is that no additional energy has to be applied to operate the BOA. The oil is separated from the surrounding water by the surface properties of the textile and transported through the textile driven solely by capillary forces, even against gravity. When it reaches the end of the textile in the collection container, the oil desorbs without any further external influence due to gravitational forces. With the current scale approximately 4 L of diesel can be separated from water by one device of the Bionic Oil Adsorber per hour.

  • It seems unlikely that a functionalized knitted spacer textile is cheaper than a conventional nonwoven, like it is commonly used for oil sorbents. However, since it is a functional material, the costs must be related to the amount of oil removed. In this respect, if we compare the sales price of the BOA textile with the sales prices of various oil-binding nonwovens, the former is 5 to 13 times cheaper with 10 ct/L oil removed.
    Overall, the BOA device offers a cost-effective and sustainable method of oil-water separation in contrast to conventional cleaning methods due to the following advantages:
  • No additional energy requirements, such as with oil skimmers, are necessary
  • No toxic substances are introduced into the water body, such as with oil dispersants
  • The textiles and equipment can be reused multiple times
  • No waste remains inside the water body
  • Inexpensive in terms of the amount of oil removed.
  • The team of researchers from the ITA, the University of Bonn and Heimbach GmbH was able to prove that the novel biomimetic BOA technology is surprisingly efficient and sustainable for a self-controlled separation and automatic collection of oil films including their complete removal from the water. BOA can be asapted for open water application but also for the use in inland waters. Furthermore, it is promising, that the textile can be used in various related separation processes. The product is currently being further developed so that it can be launched on the market in 2-3 years.

 

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

Photo Formidable Media / Green Theme Technologies
14.12.2023

YKK and GTT Win ISPO Award

The ISPO Textrends judges have selected YKK's DynaPel™ water-repellent zipper as the Best Product in the accessories category. The competition, held twice a year in conjunction with the ISPO trade show, recognizes the most innovative performance textiles, components, and apparel.

Designed to be compatible with garment recycling systems, the DynaPel™ zipper uses GTT’s EMPEL® technology instead of the standard PU film to achieve its water repellency. The lack of a PU film helps remove one of the barriers of textile-to-textile recycling of performance apparel by eliminating the urethane material, which presents challenges to garment recycling processes.

Conventional chemical and mechanical garment recycling systems cannot process the polyurethane film commonly used on water-repellent zippers, necessitating the removal of zippers from garments before recycling.  This additional processing step often deters recyclers from accepting garments with PU zippers, resulting in unnecessary waste.

The ISPO Textrends judges have selected YKK's DynaPel™ water-repellent zipper as the Best Product in the accessories category. The competition, held twice a year in conjunction with the ISPO trade show, recognizes the most innovative performance textiles, components, and apparel.

Designed to be compatible with garment recycling systems, the DynaPel™ zipper uses GTT’s EMPEL® technology instead of the standard PU film to achieve its water repellency. The lack of a PU film helps remove one of the barriers of textile-to-textile recycling of performance apparel by eliminating the urethane material, which presents challenges to garment recycling processes.

Conventional chemical and mechanical garment recycling systems cannot process the polyurethane film commonly used on water-repellent zippers, necessitating the removal of zippers from garments before recycling.  This additional processing step often deters recyclers from accepting garments with PU zippers, resulting in unnecessary waste.

EMPEL® technology uses advanced green chemistry devoid of PFAS and a specialized manufacturing process that allows the chemistry to penetrate the yarn and encapsulate it with a water-repellent layer through molecular cross-linking. The molecular cross-linking creates an extremely durable layer that is highly resistant to abrasion and invisible to the eye.

More information:
ISPO Textrends Award zipper PFAS
Source:

Formidable Media / Green Theme Technologies

12.12.2023

Intertextile Shanghai Home Textiles in August 2024

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

A recent study showed a significant rise in corporate travel in 2023, driven largely by the resurgence of live business events and the easing of restrictions following several turbulent years. Adding to this, the Chinese government has announced several measures in a bid to attract more international visitors, including a simplified visa application process as the latest initiative.
 
As one of the largest economies in the world, China is renowned for producing high-value products across the home textile spectrum, making Intertextile Shanghai Home Textiles an essential stop for global suppliers and buyers aiming to kick off the next business season.  
 
Emerging markets have become a significant focus for the industry in recent years. China's exports of home textiles to the ASEAN market amounted to around USD 2.09 billion in the first quarter of 2023, with an increase of 18% year-on-year; of which around USD 1.38 billion was exported in finished goods, seeing a rise of over 42% year-on-year[3]. With this growth in trade, buyers from fast growing emerging markets are expected to increasingly benefit from the Intertextile Shanghai Home Textiles platform to fulfil their sourcing needs.
 
The upcoming Autumn edition will continue to comprise a wide range of home textile products, including bedding & towelling, rugs, table & kitchen linen, upholstery & curtain fabrics, editors, home textile technologies and textile design.
 
Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

08.12.2023

EURATEX welcomes approval of PanEuroMed rules of origin

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

Today, after ten years of intense negotiations which EURATEX supported, the European Commission reached a full and final agreement with all PEM partners. This is a landmark achievement that will unlock the full potential of the Euro-Mediterranean area as the biggest and most integrated region of advanced manufacturing and trading of sustainable textiles and clothing. The rules adopted today will accelerate the integration of T&C supply chains and boost T&C production and trade within the region, both in the East and Southern borders of the EU. In a moment when companies are looking at moving their production from Asia to nearby, like-minded and more reliable countries , it is very timely to have the PEM Convention implemented.

EURATEX’s President, Mr Alberto Paccanelli, commented: “This is a strategic trade deal that can help European companies recover from the multiple crisis which we face since 2020”. He continued “We call on the European Union to not stop here, but keep up the efforts to secure trade deals that are good for European companies and their competitive position in the world. The next objective should be the adoption of the EU-Mercosur Agreement and a conclusive settlement of all trade disputes with the United States”.    
 
According to Director General Dirk Vantyghem, “today’s unanimous vote in favour of the modernised PEM rules is good news for our industry.. We should now engage with these partner countries to fully exploit the potential of these new rules. EURATEX is ready to engage in an industrial dialogue with the companies from the PEM Countries to facilitate their transition to the new framework”.

1 The PanEuroMed contracting parties are: the EU, the EFTA States (Switzerland, Norway, Iceland and Liechtenstein), the Faroe Islands, the participants in the Barcelona Process (Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, the territories of West Bank and Gaza, Syria, Tunisia and Turkey), the participants in the EU's Stabilisation and Association Process (Albania, Bosnia and Herzegovina, the Republic of North Macedonia, Montenegro, Serbia, Kosovo), the Republic of Moldova, Ukraine.

Source:

EURATEX