From the Sector

Reset
168 results
Oerlikon führt umfassende Massnahmen ein, um die Auswirkungen der COVID-19-Pandemie zu bewältigen
Oerlikon: Ergebnisse im 1. Quartal 2020
06.05.2020

Oerlikon: Ergebnisse im 1. Quartal 2020

  • Oerlikon führt umfassende Massnahmen ein, um die Auswirkungen der COVID-19-Pandemie zu bewältigen

Die COVID-19-Pandemie hat massive Auswirkungen auf die Weltwirtschaft, Unternehmen und das Alltagsleben; Oerlikon hat Massnahmen ergriffen, um die Mitarbeitenden zu schützen und die Geschäftskontinuität zu wahren.

Oerlikon verfügt über eine solide Kapitalstruktur, starke Liquidität und nettoschuldenfreie Bilanz. Ein Massnahmenplan zur Sicherung der Liquidität und zur Senkung der Kosten in allen Geschäftsbereichen ist in Umsetzung.

Negative Auswirkungen der COVID-19-Pandemie auf den Bestellungseingang, den Umsatz und das EBITDA des Konzerns wegen längerer Stillstände in China und erster Lockdown-Massnahmen in Europa.

  • Oerlikon führt umfassende Massnahmen ein, um die Auswirkungen der COVID-19-Pandemie zu bewältigen

Die COVID-19-Pandemie hat massive Auswirkungen auf die Weltwirtschaft, Unternehmen und das Alltagsleben; Oerlikon hat Massnahmen ergriffen, um die Mitarbeitenden zu schützen und die Geschäftskontinuität zu wahren.

Oerlikon verfügt über eine solide Kapitalstruktur, starke Liquidität und nettoschuldenfreie Bilanz. Ein Massnahmenplan zur Sicherung der Liquidität und zur Senkung der Kosten in allen Geschäftsbereichen ist in Umsetzung.

Negative Auswirkungen der COVID-19-Pandemie auf den Bestellungseingang, den Umsatz und das EBITDA des Konzerns wegen längerer Stillstände in China und erster Lockdown-Massnahmen in Europa.

COVID-19-Massnahmen in China und das verlängerte chinesische Neujahr beeinträchtigen im 1. Quartal den Bestellungseingang des Segments Manmade Fibers. Die für 2020 vorgesehenen Lieferungen des Segments sollen planmässig erfüllt werden; das Segment erhält Aufträge mit Auslieferung 2022/2023 im Wert von über CHF 600 Mio. Weltweite Nachfrage nach der Meltblown-Technologie zur Herstellung von chirurgischen Gesichtsmasken steigt.

Konjunkturverlangsamung in allen Endmärkten beeinträchtigt die Performance des Segments Surface Solutions im 1. Quartal. Zur Steigerung von Effizienz und Agilität wird das bereits angekündigte Produktivitätsprogramm mit aggressiven Kostensenkungszielen weitergeführt. 

Oerlikon zieht die Jahresprognose 2020 aufgrund erheblicher Marktunsicherheit zurück; Mittelfristiges Ziel einer EBITDA-Marge von 16% bis 18% weiterhin angestrebt.

More information:
Covid-19 Oerlikon Coronavirus China
Source:

Oerlikon

06.05.2020

Lenzing’s performance impacted by historically difficult market environment

  • Fiber prices and demand under pressure due to COVID-19 crisis
  • Measures to maintain operations and to protect employees, customers and suppliers implemented successfully
  • Hygiene competence center established to produce personal protective equipment in the fight against COVID-19 pandemic
  • Strategic investment projects in Brazil and Thailand progressing according to plan
  • Management Board proposes not to distribute a dividend for 2019 – AGM rescheduled for June 18, 2020

In a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis, the Lenzing Group held its ground well in the first quarter of 2020. Thanks to a diversified business model and its global footprint on the one hand, and the disciplined implementation of the sCore TEN corporate strategy on the other, the effect on the revenue and earnings development was partially offset.

  • Fiber prices and demand under pressure due to COVID-19 crisis
  • Measures to maintain operations and to protect employees, customers and suppliers implemented successfully
  • Hygiene competence center established to produce personal protective equipment in the fight against COVID-19 pandemic
  • Strategic investment projects in Brazil and Thailand progressing according to plan
  • Management Board proposes not to distribute a dividend for 2019 – AGM rescheduled for June 18, 2020

In a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis, the Lenzing Group held its ground well in the first quarter of 2020. Thanks to a diversified business model and its global footprint on the one hand, and the disciplined implementation of the sCore TEN corporate strategy on the other, the effect on the revenue and earnings development was partially offset.

In the first quarter of 2020, revenue declined by 16.7 percent in comparison with the prior-year quarter and amounted to EUR 466.3 mn. The main reason was the development of prices for standard viscose (due to significant overcapacity in the market) and other standard fibers. The impact of the COVID-19 crisis further increased pressure on prices and volumes. The prices for standard viscose dropped to a new all-time low of 9,150 RMB/ton by March 31 – up to 33 percent lower than in the prior-year quarter. The comparatively positive development of the specialty fiber business and slightly higher demand for fibers in the medical and hygiene segments partially offset the decline in revenue. The share of specialty fibers increased from 47.3 percent in the first quarter of the previous year to 60.9 percent. The earnings development reflects the decline in revenue: EBITDA (earnings before interest, tax, depreciation and amortization) decreased by 24.3 percent to EUR 69.6 mn. The EBITDA margin declined from 16.4 percent to 14.9 percent. Net profit for the period was down 58.6 percent to EUR 17.7 mn. Earnings per share amounted to EUR 0.84 compared with EUR 1.65 in the first quarter of the previous year.

More information:
Lenzing AG
Source:

Lenzing AG

06.05.2020

Lenzing Board proposes waiver of dividend for 2019

The Management Board of the Lenzing Group reassessed its original resolution for a dividend distribution of EUR 1.00 and decided to propose to the Supervisory Board and the Annual General Meeting not to distribute a dividend for the 2019 financial year due to the COVID-19 crisis.

The Management Board of the Lenzing Group reassessed its original resolution for a dividend distribution of EUR 1.00 and decided to propose to the Supervisory Board and the Annual General Meeting not to distribute a dividend for the 2019 financial year due to the COVID-19 crisis.

More information:
Lenzing AG Dividende
Source:

Lenzing AG

CHIC zum ersten Mal digital (c) CHIC ONLINE
(c) CHIC ONLINE
04.05.2020

CHIC zum ersten Mal digital

  • CHIC ONLINE vom 22. bis 24. April 2020
  • Erfolgreiche Premiere der digitalen Ausgabe der CHIC vom 22.-24. April 2020
  • Mehr als 1.350 Austeller nahmen an den über 100 Online-Aktivitäten der Messe teil
  • Alle Vertriebskanäle des chinesischen Handels waren auf der Plattform vertreten
  • Im Fokus der Kunden: innovatives, kreatives Design und hochwertige Produkte

1.350 teilnehmende Aussteller, über 100 Online-Aktivitäten, über 60 Live-Medienberichte, bis zu 157.403 Besuche verzeichnete die erste CHIC ONLINE vom 22. bis 24. April 2020.

Die aktuell weltweit schwierige wirtschaftliche Situation durch die Corona-Pandemie läßt die Unternehmen nach neuen Lösungsansätzen für ihre Geschäftsmöglichkeiten suchen.
CHIC, China International Fashion Fair, hat mit CHIC ONLINE, ihrer ersten digitalen Messe, an drei Tagen die Möglichkeit geboten, sich mit Entscheidern des chinesischen Modehandels zu vernetzen, sich auszutauschen und Ressourcen zu bündeln.

  • CHIC ONLINE vom 22. bis 24. April 2020
  • Erfolgreiche Premiere der digitalen Ausgabe der CHIC vom 22.-24. April 2020
  • Mehr als 1.350 Austeller nahmen an den über 100 Online-Aktivitäten der Messe teil
  • Alle Vertriebskanäle des chinesischen Handels waren auf der Plattform vertreten
  • Im Fokus der Kunden: innovatives, kreatives Design und hochwertige Produkte

1.350 teilnehmende Aussteller, über 100 Online-Aktivitäten, über 60 Live-Medienberichte, bis zu 157.403 Besuche verzeichnete die erste CHIC ONLINE vom 22. bis 24. April 2020.

Die aktuell weltweit schwierige wirtschaftliche Situation durch die Corona-Pandemie läßt die Unternehmen nach neuen Lösungsansätzen für ihre Geschäftsmöglichkeiten suchen.
CHIC, China International Fashion Fair, hat mit CHIC ONLINE, ihrer ersten digitalen Messe, an drei Tagen die Möglichkeit geboten, sich mit Entscheidern des chinesischen Modehandels zu vernetzen, sich auszutauschen und Ressourcen zu bündeln.

„Der Start der CHIC ONLINE ist ein historischer Tag für CHIC, die nach ihrer Gründung vor 28 Jahren hiermit zum ersten Mal online gegangen ist.“ Chen Dapeng, Präsident der China National Garment Association und CHIC, Vizepräsident der China Textile Industry Federation.

Mehr als 1.350 Hersteller haben ihre Angebote in die Online-Meeting-Räume von Tencent Meeting und Ding Talk hochgeladen und an den über 100 Online-Meeting-Aktivitäten von CHIC ONLINE teilgenommen. Die über Jahrzehnte gesammelten Ressourcen der CHIC, ihr Netzwerk und ihre Erfahrungen beim Informationsaustausch sind bei dem Event zum Tragen gekommen. CHIC ONLINE ist ein positiver Ansatz für die digitale Transformation der Messe und gleichzeitig ein pragmatischer Schritt die Geschäftskanäle und Ressourcen miteinander zu verknüpfen.

In dieser speziellen Zeit ist CHIC ONLINE für die gesamte chinesische Bekleidungsindustrie und ihre internationalen Teilnehmer kostenfrei geöffnet gewesen, als Unterstützungsmaßnahme der CHIC für Chinas Mode- und Lifestyle-Industrie.

Die Online-Messehalle unterteilte sich in die Segmente Men, Women, Impulses (Designer), KIDZ, Winter (Leder und Pelz, Daunen), CHIC YOUNG BLOOD (Streetwear), Tailoring (Bespoke), Accessoires, Taschen und Schuhe, Fashion Journey (internationale Marken) und Sourcing. Die Meeting-Räume waren klar nach Angebot und Nachfrage strukturiert, eine direkte Brücke für die Kommunikation in Echtzeit.
Alle Kanäle des chinesischen Handels waren bei CHIC ONLINE vertreten: E-Commerce Plattformen wie Tmall, Jingdong, VIP Shop, oder NetEase Yeaton (Chinas "Muji"), eine der beliebtesten Online-Plattformen in China und Biyao Shop - ursprünglich gegründet als Verkaufsplattform für Luxusprodukte direkt vom Hersteller zu günstigeren Preisen - mit mittlerweile 20 Millionen Abonnenten, über 80.000 Bestellungen täglich.

Department Stores wie die Wangfujing-Gruppe, Weifang Department Store Group, LiQun Gruppe nutzten CHIC ONLINE für die Suche nach neuen Marken genauso wie zahlreiche Multi-brand Boutiquen darunter HANATEBAKO Designer Brand Collection Store aus Qingdao, dessen Direktor Jiang Shixiang in der Angebotsvielfalt und Diversifikation der Kategorien die Zukunft der Offline-Stores im chinesischen Markt sieht. Besonders die Segmente Accessoires und Schuhe seien für die Boutiquen wichtige Themen.

Auch internationale Einkäufer nutzten die Messe für die Suche nach Produzenten, wie Social Cloud Co., Dont Give Up Co., und WHYNOTCo. aus Italien.

Kollektionen mit starkem Design, innovative und individuelle Produkte standen im Fokus der Kunden. Ein grundlegender Trend sind gestiegene Qualitätsanforderungen für alle Produktsegmente, auch für die Basisprodukte. Der Konsument wünscht sich qualitativ hochwertige Ware, Qualität vor Quantität. Das ist während der CHIC ONLINE von den Marktteilnehmern hervorgehoben worden.

Chen Dapeng resümiert: „Die digitale Premiere der CHIC ist bei allen Teilnehmern auf positive Resonanz gestoßen. Als verläßlicher Partner der Branche ist es CHICs Absicht und Zweck der Industrie und dem Handel pragmatische Unterstützung zu bieten. Wir sind überzeugt, dass Chinas Modeindustrie neu gestartet ist.“

Freudenberg Vliesstoffproduktion (c) Freudenberg
Freudenberg Vliesstoffproduktion
04.05.2020

Freudenberg startet Masken-Produktion

  • In der Krise Kräfte gebündelt

Weinheim - Das globale Technologieunternehmen Freudenberg hat mit der Produktion von Mund-Nase-Masken für Endverbraucher begonnen. Diese sind ab dem 11. Mai unter dem Markennamen „Collectex“ – zunächst nur für Deutschland – im Vileda-Online-Shop und über Handelspartner der Geschäftsgruppe Freudenberg Home and Cleaning Solutions (FHCS) erhältlich.

In den vergangenen Wochen haben drei Geschäftsgruppen der Freudenberg Gruppe – Freudenberg Filtration Technologies, Freudenberg Home and Cleaning Solutions und Freudenberg Performance Materials – ihre Expertise in technischen Vliesstoffen, Filtermedien und Distribution gebündelt. Gemeinsam haben die Freudenberg-Spezialisten in kürzester Zeit eine eigene Maskenfertigung aufgebaut und zuerst die Freudenberg-Standorte mit den nötigen Mengen versorgt. „Ziel war es, unserer Verantwortung gegenüber unseren Mitarbeitern und der Gesellschaft gerecht zu werden. Wir haben schnell gehandelt, unsere Kapazitäten ausgebaut und in Produktionsanlagen für die Konfektionierung von Mund-Nase-Masken investiert“, so Dr. Mohsen Sohi, CEO der Freudenberg Gruppe.

  • In der Krise Kräfte gebündelt

Weinheim - Das globale Technologieunternehmen Freudenberg hat mit der Produktion von Mund-Nase-Masken für Endverbraucher begonnen. Diese sind ab dem 11. Mai unter dem Markennamen „Collectex“ – zunächst nur für Deutschland – im Vileda-Online-Shop und über Handelspartner der Geschäftsgruppe Freudenberg Home and Cleaning Solutions (FHCS) erhältlich.

In den vergangenen Wochen haben drei Geschäftsgruppen der Freudenberg Gruppe – Freudenberg Filtration Technologies, Freudenberg Home and Cleaning Solutions und Freudenberg Performance Materials – ihre Expertise in technischen Vliesstoffen, Filtermedien und Distribution gebündelt. Gemeinsam haben die Freudenberg-Spezialisten in kürzester Zeit eine eigene Maskenfertigung aufgebaut und zuerst die Freudenberg-Standorte mit den nötigen Mengen versorgt. „Ziel war es, unserer Verantwortung gegenüber unseren Mitarbeitern und der Gesellschaft gerecht zu werden. Wir haben schnell gehandelt, unsere Kapazitäten ausgebaut und in Produktionsanlagen für die Konfektionierung von Mund-Nase-Masken investiert“, so Dr. Mohsen Sohi, CEO der Freudenberg Gruppe.

Neben der Qualität der Masken ist Freudenberg eine faire und bedarfsorientierte Verteilung wichtig. Dies soll durch den Verkauf über den Vileda-Online-Shop und einer Maximalbestellung von

zwei Verpackungseinheiten pro Online-Besteller sichergestellt werden. Dies ermöglicht eine breite Streuung, so dass möglichst viele Menschen Masken erhalten können.

Die Produktion findet in Deutschland statt und läuft seit Ende April. Freudenberg Home and Cleaning Solutions vertreibt die Masken unter dem Namen „Collectex“. Im Gegensatz zu den inzwischen häufig vorkommenden industriell oder privat gefertigten Baumwollmasken werden die Freudenberg-Masken aus einem hochwertigen, dreilagigen Filtermedium hergestellt.

Dieses Filtermedium besteht aus hochtechnischen Vliesstoffen, die ebenfalls in Deutschland hergestellt werden. Die Materialien werden in neu angeschafften, sukzessive anlaufenden Konfektionierungsanlagen zu Masken weiterverarbeitet – zunächst für den deutschen Markt. Freudenberg plant, die Kapazität in den nächsten Wochen weiter auszubauen, so dass schließlich täglich rund eine Million Masken im Vierschichtbetrieb rund um die Uhr an sieben Tagen die Woche hergestellt werden können. Darüber hinaus liefert das Technologieunternehmen weiterhin Flächenware an professionelle Konfektionierungsfirmen und bestehende Kunden.

Derzeit laufen Vorbereitungsarbeiten, um auch in Nordamerika Masken für den dortigen Markt zu produzieren. Die Freudenberg-Geschäftsgruppe Japan Vilene Company fertigt seit jeher Masken für den asiatischen Markt, allem voran Japan. Allerdings unterliegen diese Produkte den COVID-19 geschuldeten Ausfuhrbeschränkungen der jeweiligen Länder.

Source:

Freudenberg & Co. KG

Logo Mimaki
Mimaki starts to produce masks
29.04.2020

Energiapura: production of masks

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

  • The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
  • Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.

 

More information:
corona virus face masks
Source:

(c) Mimaki Europe B.V.

Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns (c) GB Network
Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns
29.04.2020

Call to action of the fashion world

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S.

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy)the eco multi-platform hub specialized in integrating a new generation of eco values into fashion, products and companies, Simona Roveda, Editorial Director and Director of Institutional Communication of LifeGate and Marina Spadafora, Italian Country Coordinator of Fashion Revolution and currently collaborating with Luxury Fashion Brands to implement responsible strategies in their companies have luaunched a call-to-action project which has brought together textile companies to manufacture PPE garments for the medical staff working in San Gerardo Hospital in Monza, near Milan.

The companies that answered the call-to-action are: Filo d’Oro, Mantero, ROICA™ by Asahi Kasei, C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) e Zerobarracento, Iluna Group, Lg Electronics, Jimmy Lion, Personal Genomics, Isamar Holyday Village, Marcolin Eyewear, Maglificio Ripa.

During the last weeks the 4 women collected about 1,800 non-drip cotton and non-woven TNT gowns for sanitary use, about 400 protective masks for multipurpose washable, bacteriostatic, breathable and water-repellent prevention, 1,000 washable cotton surgical caps, 150 complete protective googles eye masks, two microwave ovens for hospital departments to offer support to medical and healthcare personnel by helping them in the few breaks during the grueling shifts of this period, a supply of samples of cotton socks, 300 cotton masks + polyester outer layer, water-repellent and antibacterial, and free weekly stays made available to doctors, nurses, civil protection personnel and families with related children involved in the Covid-19 pandemic.

Source:

GB Network Marketing Communications Srl

 

CRAFT produziert Community Masks für den Einkauf im Sportfachhandel (c) CRAFT / NEW WAVE GmbH
CRAFT produziert Community Masks für den Einkauf im Sportfachhandel
28.04.2020

CRAFT – Support your local dealer

  • Support Your Local Dealer geht in die nächste Runde
  • CRAFT produziert Community Masks für den Einkauf im Sportfachhandel

Funktions-Spezialist CRAFT produziert ab sofort Mund-Nasen-Masken (Typ 1) für seine Handelspartner. Die Community Masks sollen nicht nur dabei helfen, die Masken-Pflicht im Sportfachhandel umzusetzen, sondern mit dem Aufdruck “Support your local dealer” bewusst dazu animieren, den Sporthändler um die Ecke zu unterstützen. Damit setzt der schwedische Spezialist für Funktionsbekleidung nahtlos an den ersten Teil seiner “Support your local Dealer”-Aktion an, als sie für alle Partner ohne eigenen Online-Shop den Versand an deren Endverbraucher übernahmen.

  • Support Your Local Dealer geht in die nächste Runde
  • CRAFT produziert Community Masks für den Einkauf im Sportfachhandel

Funktions-Spezialist CRAFT produziert ab sofort Mund-Nasen-Masken (Typ 1) für seine Handelspartner. Die Community Masks sollen nicht nur dabei helfen, die Masken-Pflicht im Sportfachhandel umzusetzen, sondern mit dem Aufdruck “Support your local dealer” bewusst dazu animieren, den Sporthändler um die Ecke zu unterstützen. Damit setzt der schwedische Spezialist für Funktionsbekleidung nahtlos an den ersten Teil seiner “Support your local Dealer”-Aktion an, als sie für alle Partner ohne eigenen Online-Shop den Versand an deren Endverbraucher übernahmen.

“COVID-19 und die daraus resultierende temporäre Schließung vieler Ladengeschäfte trifft den Sportfachhandel sehr hart. Dass nun eine Vielzahl von Geschäften wieder öffnen dürfen, ist eine positive Entwicklung Richtung Normalität. Trotzdem stehen unsere Partner vor einer neuen Herausforderung: Die Umsetzung sämtlicher Hygiene-Maßnahmen und die Einhaltung der Maskenpflicht auf ihren Verkaufsflächen”, sagt Andre Bachmann, Geschäftsführer CRAFT Deutschland.

“Warum das Ganze nicht etwas orgineller gestalten? Wir bieten unseren Händlern Mund-Nasen-Masken im CRAFT-Design und der Aufschrift ‘Support your local dealer’ an, um die Maskenpflicht entsprechend umzusetzen und den Händlern ein Marketing-Tool an die “Hand zu geben: ‘Bestellt oder holt Euch die Masken bei uns und besucht uns in unserem lokalen Geschäft’ – support your local dealer eben”, so Bachmann weiter.“

Die CRAFT Community Masks sind wiederverwendbar, waschbar bei 90°, wasserabweisend auf der Außenseite und sanitized bakteriell ausgerüstet auf der Innenseite. Zudem sind die Masken (87% Polyester, 13% Elasthan) made in Europe.

Selbst wenn CRAFT damit bewusst seine Partner im stationären Handel unterstützen möchte, gilt das Kredo dieser Zeit universell und darf von Jedermann getragen werden, um seine Unterstützung für den kleinen Supermarkt, Gemüsehändler, die Lieblings-Bar oder den Lieblings-Italiener um die Ecke zum Ausdruck zu bringen.

More information:
Covid-19 CRAFT Mundschutzmasken
Source:

CRAFT / NEW WAVE GmbH

27.04.2020

Using chemistry to fight Covid-19: CHT Group expands product portfolio

In mid-March, CHT Germany GmbH, which specializes in specialty chemicals, took up production and distribution of hand disinfectant. Now the company is expanding its product portfolio by adding important medical supplies that can help fight Covid-19 (SARS-CoV-2). Starting immediately, CHT is providing its business customers with surface disinfectant, textile supplies for medical protective wear as well as supplies for test kits and face masks.

In mid-March, CHT Germany GmbH, which specializes in specialty chemicals, took up production and distribution of hand disinfectant. Now the company is expanding its product portfolio by adding important medical supplies that can help fight Covid-19 (SARS-CoV-2). Starting immediately, CHT is providing its business customers with surface disinfectant, textile supplies for medical protective wear as well as supplies for test kits and face masks.

Following increased demand for disinfectant in the wake of the new coronavirus, the CHT Group began already a month and a half ago to produce hand disinfectant at its factory in Dußlingen. Since then, more of its factories around the world had joined in. Now the CHT Group is complementing this offering by producing its own surface disinfectant based on ethanol. As with the hand disinfectant, the production of the surface disinfectant received a special approval, based on the expanded general ruling by the German Federal Agency  for Chemicals (BAuA). Both types of disinfectant use publicly available standard formulas for alcohol-based disinfectant from the World Health Organization (WHO). The sale of CHT’s surface disinfectant, which is available in 5-, 10- and 30-liter canisters, is exclusively for use by industry customers.

In addition, the CHT Group is manufacturing a range of textile-relevant products that provide protection from Covid-19. These include functional supplies for face masks for medical protective wear, as well as flocking for test kits. Through these offerings, the CHT Group also wants to support the textile sector, which has been strongly affected by the crisis.

More information:
surface disinfectant CHT Gruppe
Source:

CHT Gruppe

24.04.2020

Lenzing AG and Palmers Textil AG found Hygiene Austria LP GmbH

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

Source:

Lenzing AG

Logo monforts
Logo monforts
21.04.2020

Monforts: Industrial-scale testing for new PPE finishes

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

The three lines at the ATC situated at the Monforts HQ in Mönchengladbach, are of a true industrial scale and trialling new products on them goes beyond lab or pilot plant testing to rapidly identify any problems that might occur once full production is underway.

 

More information:
Monforts corona virus
Source:

AWOL Media

Logo Parkdale Mills
Parkdale Mills supply swabs for covid-19 tests
20.04.2020

Parkdale Mills Collaborates to Supply Swabs for Coronavirus Tests

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

The FDA has determined that spun synthetic swabs can be used in COVID-19 testing based on the results from a clinical investigation stemming from its collaboration with UnitedHealth Group, the Gates Foundation and Quantigen.  

This is the second major COVID-19 relief project that Parkdale has helped. Earlier Parkdale constructed a supply chain that includes Hanes, Fruit of the Loom, and many other U.S. companies in the production of PPE masks needed by frontline medical staff treating the virus.

More information:
corona virus NCTO USA
Source:

NCTO

Logo AMAC
AMAC und REACH agree on cooperation
20.04.2020

Strategic Cooperation between REACH and AMAC

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Source:

AMAC

16.04.2020

Rieter Annual General Meeting 2020

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

More information:
Rieter Rieter Holding Ltd.
Source:

Rieter Management AG

Logos of the participating companies
Gerber PPE Task Force
08.04.2020

A&E and Burlington participate in the Gerber PPE Task Force

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

For over 40 years, Burlington has been in the Medical business manufacturing fabrics for use in operating theaters such as surgeon’s gowns, isolation gowns, sterilization wrapper packs, drapes, scrubs and lab coats. The Maxima® collection of fabrics is useful for reusable isolation and surgical gowns and meets AAMI standards for Levels 1-4 and FDA standards.

Source:

American & Efird

02.04.2020

SGL Carbon SE suspends guidance for the current fiscal year

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previous expectation, which guided for a slightly lower sales revenue und a recurring EBIT1 approximately 10-15% below the prior year (sales revenue 2019: €1,087m; recurring EBIT 2019: €48m), was already made conditional by the Board of Management in the management report published on March 12, 2020, that negative effects from the coronavirus were not included, as the outbreak at that time was mainly restricted to China and Italy. In the meantime, numerous other governments have introduced far-reaching measures with substantial limitations on the public and economic sectors and leading economists now forecast significant reductions in economic output in key economies. 

The Board of Management of SGL Carbon has introduced and partially already implemented comprehensive measures to reduce the cost base and to secure liquidity. These measures include the introduction of short-time work, reduction of material and indirect spend, as well as further reduction resp. postponement of capital expenditures. In addition, we are exploring further financing options independent of the capital markets, some of which are already in preparation. The Company is intensively working on identifying and mitigating potential risks. 

More information:
SGL Carbon Coronavirus
Source:

SGL Carbon

02.04.2020

NCTO Statement on Administration’s Reported Tariff Deferral

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

If the U.S. government makes tariff concessions during this crisis, it will be inviting a virtual tsunami of imports further devastating domestic manufacturing as it attempts to regain its footing.     

We urge the administration to abandon any moves to defer tariffs on finished products. It would only serve to allow importers to exploit the current crisis, while dealing a severe blow to U.S. manufacturing and its workers.  

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

  • U.S. employment in the textile supply chain was 585,240 in 2019. 
  • The value of shipments for U.S. textiles and apparel was $75.8 billion in 2019. 
  • U.S. exports of fiber, textiles and apparel were $29.1 billion in 2019. 
  • Capital expenditures for textile and apparel production totaled $2.5 billion in 2018, the last year for which data is available.
More information:
NCTO Coronavirus
Source:

NCTO

01.04.2020

Perlon® production is still running at all sites

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

In the current situation, the company is doing everything it can to fulfill its’ responsibility as an employer and also as a business partner. Therefore all hygiene measures at all our sites have been significantly increased so that our employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimize risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry.

The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high-quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high-quality cleaning system brushes.

More information:
Perlon Coronavirus
Source:

Perlon

Logo Perlon-Group
Perlon can continue with its production
30.03.2020

Perlon® production is still running at all sites in Germany, the USA and China

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

To manage the current situation responsibly, all hygiene measures at all our sites have been significantly increased so that the employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimise risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry
The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high quality cleaning system brushes.

More information:
corona virus Perlon filament
Source:

Perlon®

DyStar (c) DyStar
27.03.2020

DyStar responds to COVID-19

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Emergency Response Plan (ERP)
DyStar’s manufacturing sites are also installed with an Emergency Response Procedure to cover all emergency circumstances, including the COVID-19 pandemic disease. The goal of the emergency response procedure is to mitigate the impact of such events on people and the environment, ensuring operational readiness of the site during an emergency.

As the world adjusts to the impact of the COVID-19 pandemic, DyStar will continue to monitor the situation very closely and will provide updates that adapt to the changing situation. We remain committed to provide our customers with excellent service and to work closely with all our partners throughout this difficult period.

More information:
Coronavirus DyStar
Source:

DyStar