From the Sector

Reset
53 results
(c) Huntsman Corporation
30.11.2021

Huntsman presents High-Performance Solutions and Protection Effects at Performance Days

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Also in the spotlight are eco-friendly solutions for the challenges of achieving full whites and consistent shades on recycled polyester (rPET) with right-first-time quality. Huntsman’s rPET processing solutions include pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

In partnership with Sciessent, Huntsman is also bringing revolutionary antimicrobial and odor-control solutions to Performance Days. These include Sciessent’s Agion Active® X2, a next-generation odor-control solution that combines advanced technologies to both capture and fight odor-causing bacteria for garments that smell fresh for longer and need less frequent washing. The partners are also previewing a new solution: Sciessent’s NOBO™, a cost-effective odor adsorber that provides odor control on virtually any fabric.

Other featured innovations include Teflon Eco Dry with Zelan™ R2 Plus technology. A breakthrough in sustainable water repellency, it contains 30% renewably sourced plant-based raw materials and meets or exceeds performance levels possible with traditional fluorinated technologies. Another exciting Huntsman solution is the new PHOBOL® Extender UXN – a product that optimizes water-repellent finishes for long-lasting fabric protection. It is free from butanone oxime, which has recently been re-classified in Europe and restricted above certain limits in products by bluesign®.

Source:

Huntsman Corporation

(c) Huntsman Corporation
29.11.2021

Huntsman’s AVITERA® SE Rose delivers Sustainability and Performance

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Using AVITERA® ROSE SE, brands can stand out with brilliant bluish-red textile products in a broader shade gamut. The dyes offer very good light fastness levels for classic bluish trichromatic element, with exceptional overall fastness performance. Products dyed with AVITERA® ROSE SE have the highest chlorine resistance, tailormade for stringent Japanese and US laundering requirements, and are suitable for use with Huntsman’s HIGH IQ® Lasting Color Eco color-retention program. With minimal chance of cross-staining, they are ideal for red-white striped cotton knit fabric.

AVITERA® ROSE SE is fully compliant with the most stringent industry and brand-specific restricted substance lists. It is bluesign® approved and is suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Launched by Huntsman Textile Effects in 2010, the first-generation AVITERA® SE dyes set the benchmark for sustainability in the textile industry. The second generation expanded the range’s color palette from the palest to the deepest and darkest shades. The third generation further enhances the economic sustainability of the AVITERA® range while delivering unrivalled environmental benefits, outstanding operational performance, and attractive textiles with exceptional overall fastness.

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

16.11.2021

Gina Tricot and We aRe SpinDye in a resource-efficient collaboration

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

More information:
We are SpinDye We aRe Spin Dye
Source:

We aRe SpinDye

(c) Avgol
15.11.2021

Avgol at Hygienix™ 2021 with biotransformation technology in nonwovens

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

More information:
Avgol Hygienix™ 2021 nonwovens
Source:

Avgol / PHD Marketing Ltd

15.11.2021

Kelheim Fibres once again finishes high in Canopy's Hot Button Ranking

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

Source:

Kelheim Fibres GmbH

15.11.2021

Autoneum: Flexi-Loft with high acoustic performance

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

11.11.2021

SGL Carbon: Q3 2021 confirms encouraging upward trend

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

Almost all business units contributed to the positive sales development. As largest business unit with a 44.7% share of Group sales, Graphite Solutions (GS) contributed €332.7 million to Group sales in the first nine months of 2021 (9M 2020: €308.0 million). The sales increase of 8.0% is based in particular on the positive development of the important market segments Semiconductor & LED as well as Automotive & Transportation. The business units Carbon Fibers and Composite Solutions contributed €244.7 million (9M 2020: €223.4 million) and €92.1 million (9M 2020: €60.7 million), respectively, to Group sales and benefited primarily from increased demand from the automotive industry. Compared to the previous year, sales increased by 9.5% in Carbon Fibers and by 51.7% in Composite Solutions. Only the Process Technology business unit, with sales down 4.9% to €62.1 million, was not yet able to participate in the general economic upward trend.

See the attached document for more infomation.

More information:
SGL Carbon sales
Source:

SGL CARBON SE

(c) ANDRITZ AG
ANDRITZ neXline Spunlace eXcelle Line
09.11.2021

ANDRITZ to supply a high-speed spunlace line to Welspun, India

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

Welspun is the largest global exporter of home textiles. Innovation and quality lie at the heart of the company’s success, which already has nonwoven production lines in operation, including needlepunch and spunlace equipment. With its new plant in Telangana, Welspun will significantly increase its existing spunlace capacity and also maintain a broad range of applications as the final products are used in hygiene, home care and industrial cleaning. The new, advanced facility is a 100,000 sqm greenfield development that is part of a larger 1,500,000 sqm industrial complex also accommodating the Welspun floorings facility.

Source:

ANDRITZ AG

05.11.2021

Indorama Ventures reports a strong 3Q21 performance on record volumes

Indorama Ventures Public Company Limited (IVL) reported a strong 3Q 2021 performance amid record production volumes. The company maintained its positive outlook for the rest of the year and 2022, noting caution as headwinds including higher energy prices and supply chain disruptions weigh against resurgent consumer demand.

IVL reported EBITDA of US$478 million in Q3 versus US$552 million in the previous quarter and US$240 million a year earlier. Production volumes reached 3.73 million metric tons, a record, as the global recovery drove consumer demand for IVL’s products.

As the global economy recovers from the pandemic, consumer appetite and increasing Brent crude oil prices are testing supply chains and driving a commodity boom, with manufacturers running at full capacity. This has driven increases in freight prices and a shortage of materials.

Indorama Ventures Public Company Limited (IVL) reported a strong 3Q 2021 performance amid record production volumes. The company maintained its positive outlook for the rest of the year and 2022, noting caution as headwinds including higher energy prices and supply chain disruptions weigh against resurgent consumer demand.

IVL reported EBITDA of US$478 million in Q3 versus US$552 million in the previous quarter and US$240 million a year earlier. Production volumes reached 3.73 million metric tons, a record, as the global recovery drove consumer demand for IVL’s products.

As the global economy recovers from the pandemic, consumer appetite and increasing Brent crude oil prices are testing supply chains and driving a commodity boom, with manufacturers running at full capacity. This has driven increases in freight prices and a shortage of materials.

Still, IVL posted a solid YTD performance, ending the first nine months of 2021 with EBITDA of US$ 1,512 million, up 123% YoY. The Integrated Oxides & Derivatives (IOD) segment will start to reap the full benefits of the hot commissioning of the Lake Charles gas cracker (IVOL) in Q4 and beyond, as well as continued advantaged shale gas economics.

In Q3, Project Olympus, the company’s cost saving and business transformation project, achieved US$63 million in efficiency gains, and is on track to achieve a total US$610 million of savings by 2023. IVL also implemented enhanced disclosures in governance, strategy, risk management, and metrics and targets, and launched a comprehensive financial policy and governance structure to accelerate environmentally driven projects.

IVL strengthened its Indorama Management Council (IMC) – the company’s highest operational management committee – by rotating experienced executives and adding the COOs of the Fibers and Integrated Oxides & Derivatives (IOD) segments. The appointments will help build the segments into self-sustaining organizations while also rotating expertise across the IMC.

3Q 2021 Performance Summary

  • Consolidated Revenue of US$ 3,867M, an increase of 9% QoQ and 50% YoY
  • EBITDA of US$ 478M in Q3 versus US$552 million, a decrease of 13% QoQ and an increase of 99% YoY
  • Reported annualized EPS of THB 4.53 and core annualized EPS of THB 4.09

 

Source:

Indorama Ventures Public Company Limited

Indorama Ventures strengthens its management council with new role rotations (c) Indorama Ventures Public Company Limited
02.11.2021

Indorama Ventures strengthens its management council with new role rotations

Indorama Ventures Public Company Limited announced it has strengthened its Indorama Management Council (IMC) – the company’s highest operational management committee – by rotating experienced executives and adding the COOs of the Fibers and Integrated Oxides & Derivatives (IOD) segments.

The elevation of Mr Christopher Kenneally, COO of Fibers, and Mr Alastair Port, COO of IOD, to the IMC – will enable more agile decision making as they build their high-growth segments into self-sustaining organizations that maximize value for IVL stakeholders. The appointments are effective immediately.

Indorama Ventures Public Company Limited announced it has strengthened its Indorama Management Council (IMC) – the company’s highest operational management committee – by rotating experienced executives and adding the COOs of the Fibers and Integrated Oxides & Derivatives (IOD) segments.

The elevation of Mr Christopher Kenneally, COO of Fibers, and Mr Alastair Port, COO of IOD, to the IMC – will enable more agile decision making as they build their high-growth segments into self-sustaining organizations that maximize value for IVL stakeholders. The appointments are effective immediately.

In a rotation of roles, Mr Sanjay Ahuja, the current CFO of IVL, will switch to Interim COO of Combined PET (CPET) for a period of 2 years, effective January 2022, as part of a rotation of senior expertise across the IMC. He will report to Mr D K Agarwal as CEO, who will take on additional broader responsibilities as CFO. The CPET role rotation will enable new dynamism in this largest segment of IVL and establish a self-sustaining organization for the permanent successor that IMC selects over this period. Mr Agarwal will be supported by Mr Ashok Jain in an enhanced role as Controller, covering Banking & Finance, Global Consolidation, Taxation and M&A.

Further, Mr Klaus Holz will join the IMC as Chief Human Resources Officer, effective 1 January 2022. He replaces Mr Roberto Bettini who will retire at the end of 2021.

Source:

Indorama Ventures Public Company Limited

26.10.2021

Crypton to introduce Crypton® Celliant®

The Crypton Companies (Crypton LLC and Nanotex LLC), leaders in high-performance fabrics for contract and residential interiors, has partnered with Hologenix®, LLC, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories. The two have collaborated to create a new textile innovation, Crypton® CELLIANT®, the first woven upholstery fabric with CELLIANT.

CELLIANT, ethically sourced minerals embedded into fibers, reflects natural body heat back to us as infrared energy. It has been clinically tested and proven to increase cellular oxygenation for improved energy, stronger performance, faster recovery, better sleep and overall enhanced wellbeing. With the tagline “easy care meets self-care,” the new Crypton CELLIANT fabric additionally offers Crypton’s performance characteristics. These include moisture-resistance, stain-resistance, spill-repellence, odor-resistance and cleanability. Both Crypton’s contract fabrics and its Crypton Home lines will offer collections of this innovative blend of Crypton performance along with CELLIANT’s energy-enhancing properties.

The Crypton Companies (Crypton LLC and Nanotex LLC), leaders in high-performance fabrics for contract and residential interiors, has partnered with Hologenix®, LLC, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories. The two have collaborated to create a new textile innovation, Crypton® CELLIANT®, the first woven upholstery fabric with CELLIANT.

CELLIANT, ethically sourced minerals embedded into fibers, reflects natural body heat back to us as infrared energy. It has been clinically tested and proven to increase cellular oxygenation for improved energy, stronger performance, faster recovery, better sleep and overall enhanced wellbeing. With the tagline “easy care meets self-care,” the new Crypton CELLIANT fabric additionally offers Crypton’s performance characteristics. These include moisture-resistance, stain-resistance, spill-repellence, odor-resistance and cleanability. Both Crypton’s contract fabrics and its Crypton Home lines will offer collections of this innovative blend of Crypton performance along with CELLIANT’s energy-enhancing properties.

Crypton CELLIANT is exclusively woven at The Crypton Mills at Broad River, the firm’s own mill in Cliffside, North Carolina, and enhanced with performance technology in its research and manufacturing facility in Kings Mountain, North Carolina, to the highest environmental standards. Like all Crypton products, Crypton CELLIANT is GREENGUARD® Gold Certified. Crypton CELLIANT will be introduced to market through distributors in early 2022.

Source:

Hologenix

25.10.2021

TMAS members showcase sustainable finishing technologies

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

22.10.2021

Rieter Investor Update 2021

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

The order intake of CHF 1 673.9 million after nine months corresponds to an increase of 294% compared to the prior year period (2020: CHF 425.1 million).
 
The market development is broadly supported at the global level and is based on a catch-up effect from 2019 and 2020 in combination with a regional shift in demand. Rieter believes that a major reason for this regional shift in demand is the development of costs in China. This is leading to increased investments outside the Chinese market. The orders came primarily from Turkey, Latin America, India, Pakistan and China. Overall, Rieter is benefitting from its innovative product range and the global positioning of the company.

The Business Group Machines & Systems achieved an order intake totaling CHF 1 281.6 million in the first nine months of 2021 (+447%).*

In the first nine months of 2021, the Business Group Components recorded an increase of 95% to CHF 227.0 million, while the Business Group After Sales posted an order intake of CHF 165.3 million, an increase of 123% compared to the prior year period.*

Acquisition of the three Saurer businesses on schedule
The acquisition of the three businesses from Saurer, which Rieter announced on August 16, 2021, is proceeding according to plan. The incoming orders for these businesses are not taken into account in this trading update.
 
Credit lines renewed early
The Rieter Group arranged the early renewal of the existing committed credit lines (five-year term, totaling CHF 250 million).
 
Outlook 2021*
The first nine months of 2021 were characterized by a rapid market recovery combined with a regional shift in demand. Rieter expects the demand for new systems to gradually return to normal in the coming months.  
 
For the full year 2021, Rieter anticipates sales of around CHF 900 million.

* See attached document for more information.

More information:
Rieter spinning Fibers yarn
Source:

Rieter Management AG

(c) Trevira GmbH
19.10.2021

Indorama at Index 2021 with Sustainability Portfolio

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

At the Index Show, the Hygiene Fibers Group launched CiCLO®, a textile technology which allows polyester and other synthetic materials to biodegrade like natural materials do in wastewater treatment plant sludge, sea water and landfill conditions, reducing synthetic microfiber pollution generated during washing, and minimizing plastic accumulation in landfills caused by discarded textiles.

In line with the company’s commitment to support customers with high performance products, while also reducing the impact on the environment, several of the  Hygiene Fibers brands, including Wellman International, Trevira GMBH and Auriga, have been working closely over the last 12 months with the IAM team and the CiCLO® technology. Developments have focused on PET and rPET staple fiber and filament sustainable solutions for applications where recycling is particularly challenging, such as Hygiene, Home Textiles and Automotive applications.

Strengthening the profile of biodegradable offerings within the Hygiene Fibers Group’s sustainability portfolio, Trevira introduced a new range of bicomponent fibres based on PLA and PBS (polybutylene succinate) at the Index show. Both biopolymers offer an exceptional technological opportunity in terms of environmental care and sustainability, while delivering optimum performance. Equally to PLA, PBS is recyclable and up to 100% biodegradable under industrial conditions.

Efforts towards supporting customers to achieve circular objectives are a priority within the Hygiene Fibers Group. This is reflected in the recycled fibers expertise deployed across the segment. Four Hygiene Fibers Group brands, IVL Asia, Auriga, Trevira and Wellman International offer an extensive range of 100% recycled, accredited PET fibers, across a multitude of fiber and nonwovens applications.

The development and evolution of sustainable technologies is central to activity across IVL’s Hygiene Fibers Group, with particular focus on sustainable polyolefin solutions. FiberVisions and ES-FIBERVISIONS, leading Polyolefin mono and bico fiber brands and sister company Avgol, have partnered with UK-based Polymateria to commercially harness the innovative ‘biotransformation’ technology pioneered by Polymateria. The patented technology alters the properties of polyolefins to make them biodegradable in a natural process.  Other polyolefin sustainable innovations within the Hygiene Fibers Group were featured at Index include biosurfactant and biocolourant developments being undertaken by the Avgol team with FiberVisons progressing sustainable design solutions, including lightweight, high performance, reduced carbon solutions.

Source:

Trevira GmbH, Indorama Ventures

18.10.2021

SABIC presents new Portfolio for Nonwovens at INDEX

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

During INDEX, SABIC will exhibit a wide range of PP polymers targeted at these needs. Highlights on display will include dedicated PP and PE grades for lightweight nonwoven fabrics using the latest spunbond and meltblown processes, and a new ultra-high melt flow PP product engineered for meltblown fibers in nonwoven fabrics. The nonwoven focus will be complemented by industry proven polyolefins for cast and blown film applications in hygiene webs and laminates, providing desirable back and top sheet properties such as water tightness, breathability and elasticity.

In addition, SABIC will also present ISCC Plus certified fiber and film polymers based on circular and renewable PP and PE polymer technology as part of the company’s TRUCIRCLE portfolio for advancing the transformation of the plastics industry from a linear to a truly circular economy. Examples of this comprehensive initiative include collaborations with various market leaders in the field. Together with Fibertex Personal Care, one of the world’s largest manufacturers of spunbond nonwovens for the hygiene industry, SABIC is creating a range of high-purity nonwovens for the hygiene market using ISCC PLUS certified circular PP polymer derived from post-consumer plastic waste. In another project, Fraunhofer Institute, SABIC and Procter & Gamble (P&G) joined forces to develop and demonstrate the feasibility of an advanced close-loop recycling process for used nonwoven facemasks.

Source:

SABIC / Marketing Solutions NV

18.10.2021

Avgol talks to Biotransformation Technology in Nonwovens at Index 2020

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Source:

Avgol / PHD Marketing Ltd

14.10.2021

Baldwin brings new connected technology to FEFCO Technical Seminar

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) Officina+39 / Menabò Group srl
14.10.2021

Officina+39 presents its latest technologies and collaborations

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

The Sixth Sense: less water, more Trustainability
Officina+39 and Tejidos Royo joined forces to create a denim line that drastically reduces water consumption: this is “The Sixth Sense”, a project concretely inspired by the 2030 Agenda for Sustainable Development and specifically by its SDG6, calling to action to ensure access to water and sanitation for all. Officina+39 personally accepts this global challenge by contributing to the realization of “The Sixth Sense” with its AQUALESS MISSION. Featuring three cutting-edge laundry products for one innovative process, AQUALESS MISSION combines the application of REMOVER BC, AQUALESS AGED – a waterless compound to give denim abrasion effects –, and OZ-ONE POWDER – an advanced product to give garments a bleached yet eco-friendly treatment in a dry application, for a worn and distressed look. Compatible with conventional washing and treatment machinery, it allows for water consumption savings up to 75%.
Focused on driving sustainability in the textile industry, Tejidos Royo uses low-impact fibers and yarns as a raw material and the implementation of foam-dyeing technology with its Dry Indigo®, the first-ever technology to foam-dye denim with zero water use and no water discharge.

CircularKromia: a colorful path for preloved garments
At Officina+39 the word “waste” becomes synonymous with opportunity, a source to create something new, fostering true, Trustainable™ circularity. This is the background to the collaboration with Atelier Riforma, an innovative startup born in Turin (Italy) with a social vocation. Through the contribution of Officina+39’s RECYCROM™, it has been possible to obtain new pigment and dyestuff pulverizing discarded garments and pieces usually difficult to recover through tailoring transformation alone. The collection made it possible not to generate any waste, no new raw materials were required to create CircularKromia.

The Circle Book 2: the power of collaboration and circularity
A collective project gathering a total of ten companies with common goals focused on transparency and circularity in denim design, The Circle Book is now in its second edition that culminated in CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials.

Officina+39 opens its doors, with Lenzing and Meidea
In the evening of October 13, the recently inaugurated brand-new headquarters of Officina+39 in Biella opened their doors to welcome denim personalities, brands, designers and partners to show where Officina+39's innovative technologies are created, to network and celebrate while preparing new steps towards the design of a more circular and – of course – Trustainable™ fashion Industry.

Source:

Officina+39 / Menabò Group srl