From the Sector

Reset
1424 results
simply Kollektion von Speidel (c) Speidel GmbH
12.09.2023

Speidel Wäsche als Quiet Luxury Statement

In Zeiten von Überkonsum und auffälliger Markenpräsenz entsteht ein neuer Trend: Quiet Luxury. Dieser Trend, der zurückhaltende Eleganz und nachhaltige Qualität in den Mittelpunkt stellt, findet seinen Ausdruck in der simply Kollektion von Speidel. Als Familienunternehmen, das seit 1952 nachhaltige Wäsche mit höchsten Qualitätsansprüchen in Europa produziert, ist Quiet Luxury für Speidel nicht nur ein modisches Statement, sondern ein Kernbestandteil der Unternehmensphilosophie.

Quiet Luxury bezieht sich nicht darauf, was alle sehen können, sondern auf das, was nur jene wertschätzen, die es verstehen: die Qualität der Materialien, die Handwerkskunst hinter jedem Detail und das luxuriöse Gefühl, das bleibt, auch wenn die Wäsche aus dem Blickfeld der anderen unter der Kleidung verschwindet. Die simply Kollektion von Speidel steht für diesen subtilen Luxus: hochwertige Wäsche, die sich sanft an den Körper schmiegt und für ein rundum gutes Gefühl sorgt.

In Zeiten von Überkonsum und auffälliger Markenpräsenz entsteht ein neuer Trend: Quiet Luxury. Dieser Trend, der zurückhaltende Eleganz und nachhaltige Qualität in den Mittelpunkt stellt, findet seinen Ausdruck in der simply Kollektion von Speidel. Als Familienunternehmen, das seit 1952 nachhaltige Wäsche mit höchsten Qualitätsansprüchen in Europa produziert, ist Quiet Luxury für Speidel nicht nur ein modisches Statement, sondern ein Kernbestandteil der Unternehmensphilosophie.

Quiet Luxury bezieht sich nicht darauf, was alle sehen können, sondern auf das, was nur jene wertschätzen, die es verstehen: die Qualität der Materialien, die Handwerkskunst hinter jedem Detail und das luxuriöse Gefühl, das bleibt, auch wenn die Wäsche aus dem Blickfeld der anderen unter der Kleidung verschwindet. Die simply Kollektion von Speidel steht für diesen subtilen Luxus: hochwertige Wäsche, die sich sanft an den Körper schmiegt und für ein rundum gutes Gefühl sorgt.

Mit 93% CO2-neutraler Lyocellfaser TENCEL™ und 7% Elastan LYCRA® schafft simply ein neues Maß an Tragekomfort. Die Wasseraufnahmefähigkeit der klimaneutral zertifizierten Faser ist um 50 Prozent höher als bei Baumwolle. So wird Feuchtigkeit zuverlässig vom Körper weggeleitet, Bakterien und unangenehme Gerüche haben keine Chance. Die Designs von simply sind bewusst schlicht gehalten. Sie folgen der Quiet Luxury Philosophie und drängen sich nicht in den Vordergrund, sondern schaffen eine unaufdringliche Wohlfühlatmosphäre. Zu simply gehören drei moderne Slipformen: Minislip, Midislip und Pant. Ergänzt werden sie durch den Soft BH und den Schalen BH Triangle (erhältlich bis Cup D) sowie ein Achselhemd. Slips und Hemdchen begleiten dank flacher Verarbeitung und ohne störende Seitennähte bequem durch den Tag. simply gibt es in klassischem Schwarz und Weiß als auch in modernem Frappé und angesagtem Lapis.

Source:

Speidel GmbH

11.09.2023

Kelheim with sustainable European innovations at the Global Fiber Congress

Kelheim Fibres, a manufacturer of specialty viscose fibres, showcases its latest developments at this year's Global Fiber Congress in Dornbirn. The focus is on innovative solutions that not only promote environmental sustainability but also strengthen the European supply chain.

In his presentation "Towards high performing plant-based AHP products - a joined approach of Pelz and Kelheim Fibres," Dr. Ingo Bernt, Project Leader of Fiber & Application Development at Kelheim Fibres, together with Dr. Henning Röttger, Head of Business Development at PelzGROUP, introduces the development of a plastic-free yet high-performance panty liner. The water-repellent Kelheim specialty fibre Olea plays a crucial role in both the top and backsheet of the panty liner. This product emerged from the ambition to offer eco-friendly alternatives to conventional disposable hygiene solutions without compromising on product performance.

Kelheim Fibres, a manufacturer of specialty viscose fibres, showcases its latest developments at this year's Global Fiber Congress in Dornbirn. The focus is on innovative solutions that not only promote environmental sustainability but also strengthen the European supply chain.

In his presentation "Towards high performing plant-based AHP products - a joined approach of Pelz and Kelheim Fibres," Dr. Ingo Bernt, Project Leader of Fiber & Application Development at Kelheim Fibres, together with Dr. Henning Röttger, Head of Business Development at PelzGROUP, introduces the development of a plastic-free yet high-performance panty liner. The water-repellent Kelheim specialty fibre Olea plays a crucial role in both the top and backsheet of the panty liner. This product emerged from the ambition to offer eco-friendly alternatives to conventional disposable hygiene solutions without compromising on product performance.

A similar approach is pursued in the second presented project. Under the title "Performance Fibres meet Sustainable Design - example of a reusable Baby Diaper," Natalie Wunder, Project Leader from Kelheim Fibres' New Business Development team, together with Caspar Böhme, Co-Founder of Sumo, introduce the washable and reusable SUMO diaper. Made from biobased materials and featuring a unique construction with Kelheim specialty fibres, this combination offers double environmental benefits compared to conventional disposable baby diapers.

Both the panty liner and the SUMO diaper are manufactured entirely in Europe, resulting in shorter transportation routes and a reduced CO2 footprint. Moreover, these innovations contribute to strengthening the European textile and nonwovens industries by fostering innovation within Europe.

Source:

Kelheim Fibres GmbH

11.09.2023

Project and technology study: Trends and Design Factors for Hydrogen Pressure Vessels

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

Source:

Aachener Zentrum für integrativen Leichtbau

Foto: Globetrotter, M. Ersch-Arnolds
07.09.2023

Globetrotter stellt Studie zum Re-Use-Konzept vor

Rund 97 Prozent weniger CO2e-Emissionen, 94 Prozent Re-Use Quote – dies sind nur einige der Ergebnisse der am 5. September in Bonn vorgestellten EPEA-Studie zum Re-Use Konzept des ersten Re:Think-Stores des Hamburger Outdoor-Ausrüsters Globetrotter.

Erst vor wenigen Monaten hat Globetrotter seinen ersten Re:Think Store in Bonn eröffnet – einen Laden mit ganz besonderem Konzept: Denn der Retailer hat nahezu die gesamte Einrichtung des Vormieters Conrad Electronic übernommen und im neuen Store kreativ weitergenutzt. Und auch sonst wurden fast ausschließlich gebrauchte Materialien verwendet: So wurden Staubsauger-Halterungen zu Rucksack-Trägern umfunktioniert und alte OSB-Platten und ausrangierte Bleche verwandelten sich in eine Teststrecke für Wanderschuhe. Ein Highlight des Stores stellt eine von einem Künstler geschaf¬fene Bärenskulptur aus Metallschrott dar. Ergänzt wird das Re:Think-Konzept durch nachhaltige Angebote wie eine eigene Reparaturwerkstatt sowie die bis dato größte 2nd Hand Verkaufsfläche in einem Globetrotter-Store.

Rund 97 Prozent weniger CO2e-Emissionen, 94 Prozent Re-Use Quote – dies sind nur einige der Ergebnisse der am 5. September in Bonn vorgestellten EPEA-Studie zum Re-Use Konzept des ersten Re:Think-Stores des Hamburger Outdoor-Ausrüsters Globetrotter.

Erst vor wenigen Monaten hat Globetrotter seinen ersten Re:Think Store in Bonn eröffnet – einen Laden mit ganz besonderem Konzept: Denn der Retailer hat nahezu die gesamte Einrichtung des Vormieters Conrad Electronic übernommen und im neuen Store kreativ weitergenutzt. Und auch sonst wurden fast ausschließlich gebrauchte Materialien verwendet: So wurden Staubsauger-Halterungen zu Rucksack-Trägern umfunktioniert und alte OSB-Platten und ausrangierte Bleche verwandelten sich in eine Teststrecke für Wanderschuhe. Ein Highlight des Stores stellt eine von einem Künstler geschaf¬fene Bärenskulptur aus Metallschrott dar. Ergänzt wird das Re:Think-Konzept durch nachhaltige Angebote wie eine eigene Reparaturwerkstatt sowie die bis dato größte 2nd Hand Verkaufsfläche in einem Globetrotter-Store.

„Schon bei der ersten Besichtigung des Objektes trieb mich der Gedanke, der Retail und der Ladenbau muss sich ändern. Wir müssen uns ändern. Alles raus und neu, das kann künftig nicht mehr der richtige Ansatz sein,“ erinnert sich Globetrotter Geschäftsführer Andreas Bartmann. CEO Andreas Vogler ergänzt: „Einer der nachhaltigsten Ansätze ist es, Dinge zu nutzen, die bereits da sind. Es erfordert Mut und Pioniergeist, diesen Weg zu gehen. Doch die Ergebnisse der wissenschaftlichen Untersuchung unseres Partners EPEA zeigen, dass es sich lohnt.“

Diese wurden am 5. September im Bonner Store vorgestellt. Keynote-Speaker waren Prof. Michael Braungart, Chemiker und Verfahrenstechniker sowie Miterfinder des Cradle to Cradle-Prinzips und international tätiger Retail-Experte Wolf-Jochen Schulte-Hillen.

Ein konventionelles Ladenbau-Projekt vergleichbarer Größe hätte, so Berechnungen von EPEA, rund 105 Tsd. kg CO2e erzeugt. Durch das Re-Use Konzept des Re:Think Stores wurden nur 3,12 Tsd. kg CO2e emittiert. Die Weiterverwendung bereits vorhandener Materialien trug zu einer CO2e-Vermeidung von 102,23 Tsd. kg, also rund 97 Prozent, bei. Dies entspricht in etwa der Menge an CO2, die entstehen würde, wenn man die Erde rund ein Dutzend Mal mit dem Auto umrunden würde.

Insgesamt kommt der Store auf eine Re-Use Quote von 94 Prozent – d. h. die meisten der verwendeten Materialien und Möbelstücke waren bereits zuvor in Gebrauch, etwa beim Vormieter Conrad Electronic oder in einem Globetrotter Store. Rund 88 % der in der Filiale verbauten Materialien können auch in Zukunft wiederverwendet werden, da sie ohne Beschädigung oder erheblichen Aufwand demontierbar bzw. reparierbar sind: Kreislaufwirtschaft im Ladenbau ist möglich.

Neuer Circularity Passport Interiors
Im Rahmen der Zusammenarbeit mit EPEA entstand die Idee, einen „Circularity Passport Interiors“, kurz CPI, ähnlich dem bereits bestehenden „Circularity Passport Buildings“, zu entwickeln. Dieser dient dazu, die Umsetzung des Cradle-to-Cradle-Designprinzips in Bezug auf die Innenraumgestaltung zu bewerten. Ziel des Designprinzips ist es, Rohstoffe für Produkte, Prozesse und Gebäude so einzusetzen, dass diese entweder in einem technischen Kreislauf in gleicher Qualität erhalten bleiben oder in einen biologischen Kreislauf zurückgeführt und komplett abgebaut werden können.

Source:

Globetrotter

06.09.2023

Autoneum joins the United Nations Global Compact initiative

Autoneum has joined the worldwide United Nations (UN) Global Compact initiative for corporate sustainability. The Group is thus committed to acting responsibly in accordance with the principles of the UN Global Compact in the areas of human rights, labor, environmental protection and anti-corruption. By joining the world's largest initiative for sustainable business – the UN Global Compact sponsored by the United Nations –, Autoneum is strengthening its commitment to sustainable corporate development at its sites worldwide. Launched in 2000, the UN Global Compact brings together more than 13 000 members in 162 countries.

Autoneum has joined the worldwide United Nations (UN) Global Compact initiative for corporate sustainability. The Group is thus committed to acting responsibly in accordance with the principles of the UN Global Compact in the areas of human rights, labor, environmental protection and anti-corruption. By joining the world's largest initiative for sustainable business – the UN Global Compact sponsored by the United Nations –, Autoneum is strengthening its commitment to sustainable corporate development at its sites worldwide. Launched in 2000, the UN Global Compact brings together more than 13 000 members in 162 countries.

More information:
Autoneum UN Gobal Compact
Source:

Autoneum Management AG

Manel Echevarria Photo Ananas Anam
Manel Echevarria
06.09.2023

Ananas Anam: Manel Echevarria new CEO

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

“The appointment of Manel Echevarria as a seasoned CEO with an impressive track-record in the fashion and luxury industry marks another important milestone in setting Ananas Anam up for the next phase of growth” says Dr. Christian Kurtzke, Chairman of Ananas Anam. “Following our investment in the development of an impressive portfolio of next-generation innovative biodegradable, traceable and sustainable materials, and into the setup of its network of strategic partners on the supply and shareholder side, Manel will provide the leadership for driving growth and industrial scale of this pioneering sustainability brand amidst a continued challenging global market environment in fashion, interiors and automotive.”

With Ananas Anam’s core portfolio of innovative materials, the company has successfully collaborated with well-known brands including Nike, Hugo Boss, H&M, Paul Smith and Cat Footwear and sustainable-fashion pioneers like Ecoalf to drive innovation in footwear, as well as with fashion brands like Carolina Herrera in the area of bags and accessories, substituting animal leather in the product design with its vegan, cruelty-free, low-impact and sustainable pineapple leaf fibre based textiles. In July 2023, at the Premiere Vision exhibition in Paris, the company presented the next generation of Piñatex as well as its breakthrough innovation Piñayarn as a biodegradable, traceable and sustainable yarn, and introducing Anam PALF, as a commercially available premium textile grade pineapple leaf fibre, opening up a world of new applications and markets.

“Driving the sustainability transformation in fashion, as well as in interiors and automotive has become a key priority on the agenda of brands and OEMs around the world,” says Manel Echevarria, CEO Ananas Anam. “I am proud to have the opportunity to lead the company in this decisive time, and I am looking forward to collaborating with our exceptional Spanish founder, Dr Carmen Hijosa, and Josep Taylor in Spain, with Bruno de Penanster and his team in the UK, as well as with Chuck Lazaro and his team in the Philippines to turn this amazing sustainability ambition and purpose into a reality.”

Source:

Ananas Anam

Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

A Dress For Venice 2023 Illustration by Jacopo Ascari for A Dress For Venice 2023
05.09.2023

A Dress For Venice - Debut at the International Film Festival

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

More information:
Venice Asahi Kasei Bemberg™
Source:

C.L.A.S.S. Eco Hub

05.09.2023

Beaulieu International Group at International Conference on Geosynthetics

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu Technical Textiles' (BTT) woven geotextiles provide a wide range of functions, including separation, filtration, reinforcement and erosion control, and are among the most sustainable in the industry. Depending on weight, the carbon footprint of its woven geotextiles (m²) ranges between 0.37 and 1.40 kg CO2 eq./m². They also minimize the use of natural resources for more sustainable infrastructure development. Case studies such as at the Ostend-Bruges airport highlight significant CO2 reduction on the jobsite by replacing the transport of 960 trucks of gravel with 3 trucks of woven geotextiles, and by extending the runway’s life span.

The ICG launch of its new line Terralys MF woven filtration geotextiles with monofilament boosts the performance of a common solution in building layers that require high water flow rates. High-tenacity extruded polypropylene tapes and monofilaments are interwoven to form dimensionally stable and highly permeable geotextiles. These new filtration geotextiles provide greater resistance to dirt and biological clogging. They allow water to travel freely while reducing soil erosion when employed as a separation and stabilizing layer.

As of September 2023, all PP staple fibres and woven geotextiles will have Environmental Product Declarations (EPD) based on LCAs. Each EPD is an essential tool for communicating and reporting on the sustainability performance and helps carbon-conscious customers in their purchasing and decision making. Registered EPDs are globally recognized, publicly available and free to download through EPD Libraries.

Source:

Beaulieu International Group

Foto MeineRaumluft
05.09.2023

OETI und MeineRaumluft kooperieren

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

More information:
OETI Raumklima
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Toray Composite Materials America: Boeing Supplier of the Year Photo Toray
04.09.2023

Toray Composite Materials America: Boeing Supplier of the Year

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Source:

Toray

04.09.2023

Spinnova reviews strategy: New licensing models

Spinnova has decided to evaluate its existing strategy to prioritise areas that in the short- to medium-term deliver the fastest time to positive cashflow generation and that create the most value for the company’s stakeholders.
 


The company expects to conclude the assessment of its strategy in the coming months, after which the results will be presented in more detail including key actions and any changes to medium- and long-term business targets. Financial guidance for full year 2023 is unchanged.

Spinnova has decided to evaluate its existing strategy to prioritise areas that in the short- to medium-term deliver the fastest time to positive cashflow generation and that create the most value for the company’s stakeholders.
 


The company expects to conclude the assessment of its strategy in the coming months, after which the results will be presented in more detail including key actions and any changes to medium- and long-term business targets. Financial guidance for full year 2023 is unchanged.

Spinnova’s unique sustainable technology is a key differentiator. To recognize the value of its technology offering, the company has decided to review opportunities to expand the licensing of its technology to new customers. In the future, Spinnova sees great potential in developing circular raw materials such as textile waste and agricultural waste, as well as recycled SPINNOVA® fibre. Initial tests show that refining these raw materials into micro fibrillated cellulose (MFC) may be more efficient than refining other raw materials Spinnova has worked with. The company has received significant interest from customers wanting to build plants that convert multiple circular raw materials into SPINNOVA® fibre.

Together with Suzano, Spinnova is gathering the learnings from the first Woodspin plant to support the decision making for the next Woodspin factory investment. At the same time Spinnova continues to further develop the technology concept to reduce capital expenditure per tonne of fibre produced compared to the first Woodspin plant. While Suzano develops its MFC process it is expected that the first Woodspin facility will mainly be used for R&D to test new MFC batches and that commercial production volumes will be limited in the short term. The market opportunity and ambition level with Suzano to scale Woodspin’s production capacity remains unchanged

Spinnova will continue to have the option to invest into all future Woodspin and Respin plants, as per the respective joint venture agreements. The company will evaluate whether it participates in these investments based on the value it creates for Spinnova’s shareholders compared to other opportunities to invest Spinnova’s capital. Regardless of whether Spinnova invests its own capital into future plants, Spinnova will continue to be the exclusive technology provider to Woodspin and Respin, and they will continue to be important technology customers of Spinnova.

More information:
Spinnova strategy paper licensing
Source:

Spinnova

CWS Workwear: Nachhaltige Arbeitskleidung aus Fairtrade-Baumwolle (c) CWS Workwear International GmbH
01.09.2023

CWS Workwear: Nachhaltige Arbeitskleidung mit Fairtrade-Baumwolle

Basics wie T-Shirts, Poloshirts kommen als Arbeitskleidung in fast allen Branchen zum Einsatz. Ob im Bereich Service, in der Produktion oder im Handwerk – ein gut sitzendes Shirt mit Unternehmenslogo gehört zur Standard-Ausrüstung fast jedes Unternehmens mit Mitarbeitenden im Kundenkontakt. Damit es dabei auch nachhaltig zugeht, bietet CWS Workwear nun mit den PRObasics ein Angebot aus T-Shirts und Poloshirts mit Kurz- und Langarm und Rundhals und V-Ausschnitt mit fair gehandelter Baumwolle. Dabei gibt es Damen- und Herrenvarianten und unterschiedliche Farbkombinationen. Ob einfarbig oder zweifarbig mit Reglanarm – die neuen Shirts bieten für fast alle Unternehmen und Branchen die passende Lösung. Je nach Modell bestehen die T-Shirts aus 70 % Fairtrade-Baumwolle und 30 % Polyester oder 50 % Fairtrade-Baumwolle und 50 % Polyester.

Basics wie T-Shirts, Poloshirts kommen als Arbeitskleidung in fast allen Branchen zum Einsatz. Ob im Bereich Service, in der Produktion oder im Handwerk – ein gut sitzendes Shirt mit Unternehmenslogo gehört zur Standard-Ausrüstung fast jedes Unternehmens mit Mitarbeitenden im Kundenkontakt. Damit es dabei auch nachhaltig zugeht, bietet CWS Workwear nun mit den PRObasics ein Angebot aus T-Shirts und Poloshirts mit Kurz- und Langarm und Rundhals und V-Ausschnitt mit fair gehandelter Baumwolle. Dabei gibt es Damen- und Herrenvarianten und unterschiedliche Farbkombinationen. Ob einfarbig oder zweifarbig mit Reglanarm – die neuen Shirts bieten für fast alle Unternehmen und Branchen die passende Lösung. Je nach Modell bestehen die T-Shirts aus 70 % Fairtrade-Baumwolle und 30 % Polyester oder 50 % Fairtrade-Baumwolle und 50 % Polyester.

Das Angebot der CWS PRObasics enthält außerdem Hoodies und Sweatshirts mit Rundhals in zahlreichen Farben sowie zweifarbige Sweatshirts mit Reißverschluss. Die Sweatshirts und Hoodies lassen sich auch ideal mit einer Arbeitsweste kombinieren. Die Varianten bestehen aus 60 % Fairtrade-Baumwolle und 40 % Polyester beziehungsweise 50 % Fairtrade-Baumwolle und 50 % Polyester.

Damit die CWS Arbeitskleidung lange im Kreislaufmodell hält und in Form bleibt, wird sie aus hochwertigen, nachhaltigen Materialien für eine lange Lebensdauer hergestellt. Die Arbeitskleidung wird für Unternehmen gewaschen, repariert und gepflegt. „Unser Ziel bis 2025 ist es, 90 % nachhaltige Arbeitskleidung anzubieten. Die neuen PRObasics Teile mit Fairtrade-Baumwolle tragen ihren Teil dazu bei. Unternehmen, die auf nahhaltige Arbeitskleidung setzen, können damit ihre Nachhaltigkeitsbilanz verbessern und gleichzeitig den fairen Handel von Baumwolle unterstützen“, erklärt Astrid Wozniak, Lead International Product Communications bei CWS Workwear.

CWS Arbeitskleidung aus Fairtrade-Baumwolle trägt ein Fairtrade-Siegel. Dieses schwarze Label an der PROBasics Kleidung zeigt an, dass das Material aus fair produzierter und gehandelter Baumwolle stammt. Bereits seit 2016 setzt CWS Workwear auf Fairtrade-Baumwolle in der Arbeitskleidung. Die Baumwollbauern erhalten einen fairen Preis für ihre Baumwolle und zusätzlich eine Fairtrade-Prämie, die auf den Verkaufspreis der Baumwolle aufgeschlagen wird. Diese Prämie können die Produzenten für soziale, ökologische oder wirtschaftliche Gemeinschaftsprojekte verwenden.

Source:

CWS Workwear International GmbH

01.09.2023

OEKO-TEX® Annual Report 2022/2023: 21% growth

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

For their two new certifications, OEKO-TEX® focused on cooperation with numerous parties along the global supply chain. Launched in November 2022, OEKO-TEX® RESPONSIBLE BUSINESS addresses the increasing global expectations and due diligence requirements. The tool and certification supports textile and leather companies in preventing negative effects from their own business operations, supply chains and broader business relationships. Companies working with OEKO-TEX® ORGANIC COTTON benefit from a global network of certified companies to facilitate sourcing of chemicals, materials and business partners - from cultivation to finished product.

At the organisational level, OEKO-TEX® is focusing on partnerships with multi-stakeholder initiatives to include as many different perspectives as possible and allow all parties to benefit. Working with ZDHC to promote sustainable chemical management and becoming an ISEAL community member are just two of many collaborations for OEKO-TEX®, which is striving to address the industry's most pressing challenges.

Meanwhile, the Association’s core business advances. For example, based on industry developments and scientific findings, OEKO-TEX® issued a general ban on the use of per- and polyfluorinated alkyl substances (PFAS/PFC) in textiles, leather and shoes certified by STANDARD 100, ORGANIC COTTON, LEATHER STANDARD and ECO PASSPORT. OEKO-TEX® also surpassed the milestone of 1,000 STeP certified production facilities. OEKO-TEX® is in a strong position to continue its work - enabling the industry and consumers to make more responsible decisions through partnership and education.

Source:

Oeko-Tex GmbH

Circular Clothing: Ausstellung “Design for Circularity” (c) Mpho Mokgadi
01.09.2023

Circular Clothing: Ausstellung “Design for Circularity”

Im Rahmen der Ausstellung “Design for Circularity” während den Zurich Design Weeks zeigen die Schweizer Brands FREITAG, QWSTION, NEUMÜHLE, lavie, the Blue suit und STUNED Lösungen für die Zukunft auf. Die ausgestellten Circular Product Cases zeigen, wie wir Design neu denken müssen. Damit die Produkte von heute die Rohstoffe von morgen werden können.

FREITAG
Das Denken und Handeln in Kreisläufen ist tief in der Kultur von FREITAG verankert. Während der diesjährigen Zurich Design Week gibt die Taschenherstellerin in der Installation "Always Beta. Never Waste." Einblick in zwei Zukunftsprojekte und zeigt Visionen von und mit neuen kreislauffähigen Materialien.

QWSTION
QWSTION wurde 2008 in Zürich gegründet, um Normen zu hinterfragen – kreislauffähige Taschen aus Pflanzen statt Plastik sind das Resultat. In der Ausstellung «Design for Circularity» zeigt das QWSTION-Kollektiv, weshalb seine Materialentwicklung Bananatex® im Design-Prozess eine zentrale Rolle spielt und welche Überlegungen dazu führen, dass seine Produkte in Kreisläufen bleiben können.

Im Rahmen der Ausstellung “Design for Circularity” während den Zurich Design Weeks zeigen die Schweizer Brands FREITAG, QWSTION, NEUMÜHLE, lavie, the Blue suit und STUNED Lösungen für die Zukunft auf. Die ausgestellten Circular Product Cases zeigen, wie wir Design neu denken müssen. Damit die Produkte von heute die Rohstoffe von morgen werden können.

FREITAG
Das Denken und Handeln in Kreisläufen ist tief in der Kultur von FREITAG verankert. Während der diesjährigen Zurich Design Week gibt die Taschenherstellerin in der Installation "Always Beta. Never Waste." Einblick in zwei Zukunftsprojekte und zeigt Visionen von und mit neuen kreislauffähigen Materialien.

QWSTION
QWSTION wurde 2008 in Zürich gegründet, um Normen zu hinterfragen – kreislauffähige Taschen aus Pflanzen statt Plastik sind das Resultat. In der Ausstellung «Design for Circularity» zeigt das QWSTION-Kollektiv, weshalb seine Materialentwicklung Bananatex® im Design-Prozess eine zentrale Rolle spielt und welche Überlegungen dazu führen, dass seine Produkte in Kreisläufen bleiben können.

NEUMÜHLE
Die Mono Vest ist eine Weste, die radikal nach den Prinzipien der Kreislaufwirtschaft konzipiert wurde. Im Gegensatz zu herkömmlichen Textilien, die stets aus einem praktisch nicht mehr auflösbaren Materialmix bestehen, stammt die Mono Vest aus nur einer Materialfamilie. Um die Wiederverwertung zu ermöglichen, bestehen sämtliche Komponenten aus einem einzigen Material: Polyamid 6.

Lavie
«made to last» ist der Name der Cradle to Cradle Certified® Capsule Collection von lavie, die anlässlich der Ausstellung «Design for Circularity» erstmals gezeigt wird. Gleichzeitig ist «made to last» auch die Designmaxime, welche dem gesamten Sortiment von lavie zugrunde liegt.

the Blue suit
Wie muss ein Kleidungsstück designt sein, damit es biologisch abbaubar ist? Dies ist die zentrale Frage, die the Blue suit antreibt. Eine Antwort darauf gibt der Cradle to Cradle-Designansatz, der mit der Black Denim Kollektion im Jahr 2022 umgesetzt wurde. Die Un-dyed Kollektion, die erstmals an den Zurich Design Weeks vorgestellt wird, fokussiert auf das oft vernachlässigte Thema Farbe und Druck.

STUNED
Das Taschenlabel STUNED hat sich seit seiner Gründung dem Designen praktischer, stylischer und nachhaltiger Taschen gewidmet. Nun stellt sich das Unternehmen einer neuen Herausforderung: der Kreislaufwirtschaft. Mit einer Schweizer Produktion und Cradle to Cradle Certified® Materialien bekräftigt es seine Mission für verantwortungsbewusstes Handeln. In der Ausstellung «Design for Circularity» präsentiert STUNED ein erweitertes Produktsortiment.

Source:

Circular Clothing

31.08.2023

Lenzing's Indonesian site turns into a supplier of specialty viscose fibers

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

“Demand for specialty fibers with low environmental impacts continues to grow structurally. We see enormous growth potential in Asia in particular. Through our investments in Indonesia and also at other Lenzing sites worldwide, we are in a better position to serve this growing demand. At the same time, we continue working tirelessly to make the industries in which we operate even more sustainable and to drive the transformation of the textile business model from linear to circular,” says Stephan Sielaff, Chief Executive Officer of the Lenzing Group.

More information:
Lenzing speciality fibers indonesia
Source:

Lenzing AG

Marco Paul vor Bio-Baumwollballen aus der diesjährigen Ernte Foto: Remei AG
Marco Paul, Co-CEO von Remei Tanzania
29.08.2023

Remei AG schließt Baumwoll-Aufkäufe in Tansania ab

Die Remei AG verarbeitet di tansanische Bio-Baumwolle in einer transparenten Produktion in der Lieferkette mit langjährigen Partnern ökologisch und fair zu Garn und rückverfolgbaren Bio-Baumwoll-Textilkollektionen für Retail und Brands.

In Tansania war die Baumwollernte in diesem Jahr gut, rund 2’000 Bio-Baumwollvertragsbauern aus 32 Dörfern in den Distrikten Meatu und Maswa haben dazu beigetragen.Im Durchschnitt baut ein Landwirt Bio-Baumwolle auf einer Fläche von 7 Hektar an.

Marco Paul, Co-CEO von Remei Tanzania, betonte: “Das gute Wetter hat das Baumwollwachstum in dieser Saison begünstigt. Wir haben von unseren Vertragsbauern rund 5 Mio. kg Bio-Baumwolle nach den Grundsätzen des fairen Handels mit Abnahmegarantie und zusätzlicher Bio-Prämie aufgekauft. Das ist mehr als im letzten Jahr.”

Die Remei AG verarbeitet di tansanische Bio-Baumwolle in einer transparenten Produktion in der Lieferkette mit langjährigen Partnern ökologisch und fair zu Garn und rückverfolgbaren Bio-Baumwoll-Textilkollektionen für Retail und Brands.

In Tansania war die Baumwollernte in diesem Jahr gut, rund 2’000 Bio-Baumwollvertragsbauern aus 32 Dörfern in den Distrikten Meatu und Maswa haben dazu beigetragen.Im Durchschnitt baut ein Landwirt Bio-Baumwolle auf einer Fläche von 7 Hektar an.

Marco Paul, Co-CEO von Remei Tanzania, betonte: “Das gute Wetter hat das Baumwollwachstum in dieser Saison begünstigt. Wir haben von unseren Vertragsbauern rund 5 Mio. kg Bio-Baumwolle nach den Grundsätzen des fairen Handels mit Abnahmegarantie und zusätzlicher Bio-Prämie aufgekauft. Das ist mehr als im letzten Jahr.”

More information:
Biobaumwolle Tansania Remei AG
Source:

Remei AG

(c) Delta Development
28.08.2023

Positive Footprint Wearhouse in Dorsten kurz vor Fertigstellung

Nach 16 Monaten Bauzeit ist Deutschlands erstes Positive Footprint Wearhouse fast fertiggestellt. Mit der innovativen Logistikimmobilie „Positive Footprint Wearhouse“ holt der niederländische Projektentwickler Delta Development den Denim Leader Levi Strauss & Co. in die Region und, realisiert gleichzeitig die deutschlandweit erste Logistikfläche, die dem Nachhaltigkeitsanspruch Cradle-to-Cradle® entspricht.

Nach 16 Monaten Bauzeit ist Deutschlands erstes Positive Footprint Wearhouse fast fertiggestellt. Mit der innovativen Logistikimmobilie „Positive Footprint Wearhouse“ holt der niederländische Projektentwickler Delta Development den Denim Leader Levi Strauss & Co. in die Region und, realisiert gleichzeitig die deutschlandweit erste Logistikfläche, die dem Nachhaltigkeitsanspruch Cradle-to-Cradle® entspricht.

Circa 70.000 m² umfasst die neue Logistikimmobilie auf dem revitalisierten Bergbaustandort, die der Modemarke Levi Strauss für eine Mietdauer von 20 Jahren als Distributionszentrum dienen wird. Das C2C- Zentrum verfügt unter anderem über eine Material-Datenbank zur effizienten Wiederverwertung, höchster Materialgesundheit, nachhaltiges Energie- und Ressourcenmanagement sowie einem „Human Centered Design“. Das Großprojekt erfüllt die steigenden Nachhaltigkeitsansprüche an die Baubranche. Ein wesentlicher Fokus des Neubaus liegt auf der Verwendung von Materialien, die auf Wiederverwertung, Ressourcenschonung und Abfallreduktion ausgelegt sind. So wurden etwa Betonfundamente der stillgelegten Zeche Wulfen, die sich auf dem Entwicklungsgrundstück befunden haben, recycelt und anschließend im Neubau wiederverwendet.

Source:

textschwester GmbH & Co.KG

DyStar Systainability Report 2022/23 DyStar Singapore Pte Ltd
25.08.2023

DyStar Releases 2022 – 2023 Integrated Sustainability Report

DyStar, a leading specialty chemical company announced the release of its thirteenth annual Integrated Sustainability Report. The report is prepared in accordance with the updated GRI Standards 2021: Core Options. Despite the challenging business landscape and economic situations, DyStar remains committed to delivering tangible values that the Group has strategically created through the six major capitals, using the Integrated Reporting <IR> framework.

DyStar’s business strategies have proven their effectiveness and delivered significant progress toward its 2025 targets. The company has successfully reduced its environmental footprint in Greenhouse Gas Emission intensity and Wastewater production intensity by more than 30%, compared to the baseline year 2011.

More specifically, DyStar’s Scope 1 and Scope 2 Greenhouse Gas (GHG) Emissions intensity was 45% lower (tCO2e per ton production) than the baseline year 2011, with a totaled GHG emission of 56.91 thousand tCO2e. This is also 9% lower when compared to FY2021.

DyStar, a leading specialty chemical company announced the release of its thirteenth annual Integrated Sustainability Report. The report is prepared in accordance with the updated GRI Standards 2021: Core Options. Despite the challenging business landscape and economic situations, DyStar remains committed to delivering tangible values that the Group has strategically created through the six major capitals, using the Integrated Reporting <IR> framework.

DyStar’s business strategies have proven their effectiveness and delivered significant progress toward its 2025 targets. The company has successfully reduced its environmental footprint in Greenhouse Gas Emission intensity and Wastewater production intensity by more than 30%, compared to the baseline year 2011.

More specifically, DyStar’s Scope 1 and Scope 2 Greenhouse Gas (GHG) Emissions intensity was 45% lower (tCO2e per ton production) than the baseline year 2011, with a totaled GHG emission of 56.91 thousand tCO2e. This is also 9% lower when compared to FY2021.

Similarly, for Wastewater production intensity, DyStar achieved a 52% reduction compared to baseline year 2011, and a 24% reduction from FY2021.

Some other key highlights and value-adds include (when compared to FY2021):

  • Financial Capital: The results of production efficiency and streamlining manufacturing indirectly contributed to the reduction of 5.8% in operating cost
  • Manufactured Capital: Apart from ensuring quality suppliers through DyStar’s internal audit, DyStar’s effort on environmental performance and climate impacts with the Institute of Public & Environmental Affairs (IPE) was recognized and ranked second by industry on IPE’s Green Supply Chain Corporate Information Transparency Index (CITI)
  • Intellectual Capital: The innovative Cadira® modules continue to support the supply chain with a lower carbon footprint
  • Human Capital: The full launch of DyStar University (DSU), a proprietary LMS, supports the learning and development of employees globally
  • Social Capital: DyStar’s culturally diverse workforce organized a variety of activities and events in support of its global community and made a total contribution of USD 128,946 to various corporate social responsibility (“CSR”) program.

Despite the harsh economic headwinds, these figures further demonstrated the effectiveness of DyStar’s initiatives that were installed throughout the reporting year.

DyStar maintains a cautious yet optimistic outlook on its global performance.

More information:
DyStar Sustainability Report
Source:

DyStar Singapore Pte Ltd

Nachhaltigkeits-Kodex BVMed | Bundesverband Medizintechnologie e.V.
25.08.2023

BVMed: Muster-Kodex Nachhaltigkeit für MedTech-Unternehmen

Der Bundesverband Medizintechnologie (BVMed) hat für seine Branche einen Muster-Kodex Nachhaltigkeit veröffentlicht, der die wesentlichen Aspekte für nachhaltiges Handeln von Medizintechnik-Unternehmen zusammenfasst.

Mit diesem Muster-Kodex möchte der BVMed zu einem einheitlichen Branchenstandard beitragen. Er bietet MedTech-Unternehmen Orientierung in Nachhaltigkeitsfragen sowie die Möglichkeit, gegenüber Geschäftspartnern das eigene Nachhaltigkeitsverständnis zu verdeutlichen. Dabei geht der Muster-Kodex auf die drei Säulen der Nachhaltigkeit (sozial, ökologisch, ökonomisch) ein, bildet das dort geltende Recht ab und legt es einheitlich aus.

Übersicht der Inhalte des Muster-Kodex:

Der Bundesverband Medizintechnologie (BVMed) hat für seine Branche einen Muster-Kodex Nachhaltigkeit veröffentlicht, der die wesentlichen Aspekte für nachhaltiges Handeln von Medizintechnik-Unternehmen zusammenfasst.

Mit diesem Muster-Kodex möchte der BVMed zu einem einheitlichen Branchenstandard beitragen. Er bietet MedTech-Unternehmen Orientierung in Nachhaltigkeitsfragen sowie die Möglichkeit, gegenüber Geschäftspartnern das eigene Nachhaltigkeitsverständnis zu verdeutlichen. Dabei geht der Muster-Kodex auf die drei Säulen der Nachhaltigkeit (sozial, ökologisch, ökonomisch) ein, bildet das dort geltende Recht ab und legt es einheitlich aus.

Übersicht der Inhalte des Muster-Kodex:

  • Soziale Nachhaltigkeit: Einhaltung von Arbeitsschutzpflichten, Förderung von Diversität und Inklusion, Diskriminierungsfreiheit, Zahlung eines angemessenen und gleichen Arbeitslohns, Koalitionsfreiheit sowie Verbot der Sklaverei, Zwangs- und Kinderarbeit.
  • Ökologische Nachhaltigkeit: Ressourcenschonung, Reduktion der CO2-Emissionen, Abfallreduktion und Recycling sowie Vermeidung von Umweltverschmutzung.
  • Ökonomische Nachhaltigkeit und Governance: Verantwortungsvolle Unternehmensführung und Strategie sowie nachhaltige und transparente Lieferketten.

Der Muster-Kodex kann freiwillig von allen Unternehmen der Medizintechnologie für sich übernommen und um individuelle Selbsterklärungen erweitert werden.

Zur Umsetzung des Muster-Kodex Nachhaltigkeit gibt der BVMed drei Grundprinzipien vor:

  • Egalitätsprinzip
    Gewährung eines unterschiedslosen Zugangs zu Medizinprodukten und damit verbundenen Gesundheitsleistungen. In Bezug auf Arbeitsbedingungen sollen vergleichbare Sachverhalte nicht ohne triftigen Grund ungleich behandelt werden.
  • Vorrangprinzip
    Vorrang einer schonenden Verwendung von Ressourcen (Reduce – Reuse – Recycle) und der Einrichtung und Befolgung effizienter Prozesse.
  • Vorsorgeprinzip
    Ergreifen von präventiven Maßnahmen, um negative ökologische und soziale Auswirkungen der wirtschaftlichen Tätigkeit zu vermeiden oder möglichst gering zu halten.

„Geschäftspartner:innen, Krankenhäuser und andere Stakeholder verlangen zunehmend von den Medizintechnik-Herstellern weitreichende Verpflichtungserklärungen zur Einhaltung des Lieferkettensorgfaltspflichtengesetzes. Mit unserem Muster-Kodex Nachhaltigkeit können die Unternehmen ihr soziales, ökologisches und ökonomisches Nachhaltigkeitsverständnis erklären“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der neue Muster-Kodex wurde vom BVMed gemeinsam mit der Anwaltskanzlei Clifford Chance entwickelt und durch das Bundeskartellamt geprüft. Er kann unter www.bvmed.de/kodex-nachhaltigkeit heruntergeladen werden.

Bereits 2022 gab das BVMed-Institut eine Nachhaltigkeitsstudie zur Bestimmung des sozialen, ökologischen und ökonomischen Fußabdrucks der MedTech-Branche in Auftrag. Die „SEE-Impact-Study der deutschen MedTech-Branche“ des WiFOR-Instituts setzte die Grundlage für eine umfassende Nachhaltigkeitsmessung der Lieferkette und damit einen neuen wissenschaftlichen Standard. Die Studie kann unter bvmed.de/branchenstudien eingesehen werden.

 

More information:
BVMed Kodex Medizintechnik
Source:

BVMed | Bundesverband Medizintechnologie e.V.