From the Sector

Reset
9 results
INDA: Five new Board of Directors' members (c) INDA
05.03.2024

INDA: Five new Board of Directors' members

INDA, the Association of the Nonwoven Fabrics Industry, announced the election of five new members to serve on its 2024 Board of Directors. The Board of Directors play a key role in advancing INDA’s strategic objectives, actively supporting both the industry and the membership. Their primary responsibility lies in ensuring that INDA remains responsive to the evolving needs of its members and the broader nonwovens industry, guiding the formulation of policies and programs.

The five new Board members include:

  • Jaren J. Edwards, President, Stein Fibers
  • Edward McNally, Sales Director Nonwoven, Oerlikon Nonwoven
  • Thomas Olsen, Senior Vice President, Americas Business Area, Suominen
  • Patricia A Sargeant, Vice President, Glatfelter Corporation
  • Paul Wood, President, Ontex North America

The Board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus appointees.
The Executive Committee includes:

INDA, the Association of the Nonwoven Fabrics Industry, announced the election of five new members to serve on its 2024 Board of Directors. The Board of Directors play a key role in advancing INDA’s strategic objectives, actively supporting both the industry and the membership. Their primary responsibility lies in ensuring that INDA remains responsive to the evolving needs of its members and the broader nonwovens industry, guiding the formulation of policies and programs.

The five new Board members include:

  • Jaren J. Edwards, President, Stein Fibers
  • Edward McNally, Sales Director Nonwoven, Oerlikon Nonwoven
  • Thomas Olsen, Senior Vice President, Americas Business Area, Suominen
  • Patricia A Sargeant, Vice President, Glatfelter Corporation
  • Paul Wood, President, Ontex North America

The Board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus appointees.
The Executive Committee includes:

  • Chair: Mark Thornton, Vice President, The Procter & Gamble Company
  • Vice Chair: Barbara Lawless, VP of Sales and Marketing – Medical Products, Precision Fabrics Group, Inc.
  • Past Chair: Bryan Haynes, Senior Technical Director for Global Nonwovens, Kimberly-Clark Corporation
  • Appointee: Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company
  • Appointee: Jodi Russell, Vice President R&D, Cleaning Innovation, Packaging & Sustainability, The Clorox Company
  • Appointee: Jeff Stafford, Vice President of Nonwovens, Milliken & Company
  • Appointee: Robert Weilminster, EVP & General Manager, US & Canada – Health, Hygiene and Specialties Division, Berry Global
  • Appointee: Tom Zaiser, CEO, Indorama Ventures
Source:

INDA, Association of the Nonwoven Fabrics Industry

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

(c) VDMA
Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn New Chairperson of Textile Machinery Association

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

  • Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik
  • Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik
  • Verena Thies (Vice Chairperson), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Group
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Group
Source:

VDMA e. V.
Textilmaschinen

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

02.02.2021

VDMA continues technology webtalks

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.
  • Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.
  • Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants' questions. Registration is possible.

Source:

VDMA e.V. Textilmaschinen

Photo: Shutterstock
18.06.2020

VDMA starts technology webtalks for the textile industry

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

More information:
VDMA
Source:

VDMA 
Textile Machinery

Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

Source:

Oerlikon

VDMA: Regina Brückner New Chairperson of Textile Machinery Association © VDMA
(v.l.n.r.): Chairperson and Vice Chairpersons of the Textile Machinery Association: Regina Brückner, Fritz P. Mayer, Verena Thies.
02.11.2017

VDMA: Regina Brückner New Chairperson of Textile Machinery Association

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

The new executive board for the legislative period until 2021 is composed of:
Regina Brückner (Chairperson), Brückner Trockentechnik
Verena Thies (Vice Chairperson), Thies
Fritz P. Mayer (Vice Chairman), Karl Mayer Textilmaschinenfabrik
Johann Phillip Dilo, Oskar Dilo Maschinenfabrik
Peter D. Dornier, Lindauer Dornier
Arno Gärtner, Karl Mayer Textilmaschinenfabrik
Roland Hampel, A. Monforts Textilmaschinen
Dr. Janpeter Horn, Herzog
Markus Kleindorp, Memminger-Iro
Martin Küppers, Saurer Schlafhorst
Georg Stausberg, Oerlikon Textile
Andreas Lukas, Andritz Küsters
Benjamin Mayer, Mayer & Cie.     
Eric Schöller, Groz-Beckert
Heinrich Trützschler, Trützschler

Source:

VDMA

Oerlikon presents take up winder Source: www.ita.rwth-aachen.de
Oerlikon presents take up winder
30.05.2017

Oerlikon presents new take-up winder to ITA as partial gift

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.


Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

More information:
Oerlikon, ITA
Source:

Institut für Textiltechnik of RWTH Aachen University