From the Sector

Reset
9 results
Mayer & Cie. China shows first in-house development at Shanghaitex (c) Mayer & Cie
Mayer & Cie. China shows first in-house development at Shanghaitex
05.12.2019

Mayer & Cie. China shows first in-house development at Shanghaitex

At the Shanghaitex trade fair Mayer & Cie. China (MCN) exhibited its new machine for manufacturing three-thread fleece. The MFC 3.2 is the first in-house development by the German circular knitting machine manufacturer’s Chinese subsidiary. It produces light to heavy linings and is specially geared to processing polyester yarn. The MFC 3.2 will be available from spring 2020; the material it produces is used in sports- and leisurewear.

“Three-thread fleece linings are popular all over the world,” says Marcus Mayer, Mayer & Cie.’s technical director, “albeit with important regional differences. In Europe and America customers appreciate heavier, warm cotton fabrics, whereas in Asia light, fluffy fabrics made of mixed synthetic fibres are preferred. That is why the MFC 3.2 is a major addition to our Chinese portfolio.“

At the Shanghaitex trade fair Mayer & Cie. China (MCN) exhibited its new machine for manufacturing three-thread fleece. The MFC 3.2 is the first in-house development by the German circular knitting machine manufacturer’s Chinese subsidiary. It produces light to heavy linings and is specially geared to processing polyester yarn. The MFC 3.2 will be available from spring 2020; the material it produces is used in sports- and leisurewear.

“Three-thread fleece linings are popular all over the world,” says Marcus Mayer, Mayer & Cie.’s technical director, “albeit with important regional differences. In Europe and America customers appreciate heavier, warm cotton fabrics, whereas in Asia light, fluffy fabrics made of mixed synthetic fibres are preferred. That is why the MFC 3.2 is a major addition to our Chinese portfolio.“

MFC 3.2: Tried and trusted basis, market-specific alignment
The new Chinese three-thread fleece machine is based on the established Mayer & Cie. MBF 3.2, the qualities of which deliver the goods in the MFC 3.2. They include the high quality of material on both sides of the fabric and the production of challenging weaves. At the same time, the Chinese Mayer & Cie. team attached importance to catering for local requirements, first and foremost processing polyester yarns. Thanks to cam parts developed in-house the new machine performs these tasks reliably and efficiently. At up to 30 rpm on a 30-inch diameter cylinder the MFC 3.2 produces three-thread fleece for sports- and leisurewear.

The MFC 3.2 is more than a three-thread fleece machine, however. A conversion kit transforms it into the MSC 3.2 II, the most popular machine in Mayer & Cie. China’s portfolio. The conversion works in both directions, which further upgrades the single jersey machine because “in the highly saturated Chinese single jersey market the fact that the MSC 3.2 II can be converted into a threethread fleece machine is an important selling point,” Managing Director Mayer notes.

More information:
Mayer & Cie ShanghaiTex
Source:

Mayer & Cie GmbH & Co. KG

(c) Oerlikon
Oerlikon zeigte Weltpremieren in China
26.11.2019

Oerlikon showed world premieres in China

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Launched to create new standards in texturing: the eAFK Evo generation of machines promises superior speeds, greater productivity and consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. Oerlikon Barmag showed these wideranging capabilities at the trade fair with a high-end design from the new system platform. In particular, the numerous value-added features include two that are excelling with cool technology: the optimized EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

Source:

Oerlikon Textile GmbH & Co. KG

(c) Novibra Boskovice s.r.o.
24.10.2019

Novibra at ShanghaiTex 2019

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

More information:
Novibra ShanghaiTex
Source:

Rieter Management AG

(c) Graf + Cie AG
24.10.2019

Graf at ShanghaiTex 2019

Graf introduces at ShanghaiTex three novelties for the textile market: a new card clothing with up to 30% longer lifetime, a height adjustable comb and a helpful solution for card clothing management.
MULTISHARP, the unique wear resistant alloy for card clothings, increases the lifetime of metallic card clothings on the cylinder by up to 30%. Additionally, the work load of the maintenance team can be minimized by providing longer service cycles and less unplanned downtimes.

The yield on raw material can be increased without compromising the quality requirements – thanks to the continuous height adjustability of the new combs series. The continuous and exact gap setting between nipper and circular comb on each individual combing head provides customers a new level on raw material utilization. Additionally, the maintenance people will appreciate the comfortable and easy installation of the circular comb.

Graf introduces at ShanghaiTex three novelties for the textile market: a new card clothing with up to 30% longer lifetime, a height adjustable comb and a helpful solution for card clothing management.
MULTISHARP, the unique wear resistant alloy for card clothings, increases the lifetime of metallic card clothings on the cylinder by up to 30%. Additionally, the work load of the maintenance team can be minimized by providing longer service cycles and less unplanned downtimes.

The yield on raw material can be increased without compromising the quality requirements – thanks to the continuous height adjustability of the new combs series. The continuous and exact gap setting between nipper and circular comb on each individual combing head provides customers a new level on raw material utilization. Additionally, the maintenance people will appreciate the comfortable and easy installation of the circular comb.

With the card clothing management the overall investment costs can be reduced. This is based on minimizing the operational expenses including optimizing the overall equipment effectiveness. Graf’s card clothing management prolongs the lifetime of flexible flats by up to three times without comprising on the quality parameters throughout the entire life cycle.

More information:
Graf ShanghaiTex
Source:

Rieter Management AG

(c) Bräcker AG
24.10.2019

Bräcker at ShanghaiTex 2019

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

In addition, Bräcker exhibits its well-known portfolio of high-quality products which meets the continually rising demands on the textile market like higher speeds and productivity. The rings and travellers offer long service lives, lowest yarn breaks and no thermal damages when processing man-made fibers.

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

In addition, Bräcker exhibits its well-known portfolio of high-quality products which meets the continually rising demands on the textile market like higher speeds and productivity. The rings and travellers offer long service lives, lowest yarn breaks and no thermal damages when processing man-made fibers.

More information:
Bräcker ShanghaiTex
Source:

Rieter Management AG

(c) Spindelfabrik Suessen GmbH
24.10.2019

Suessen at ShanghaiTex 2019

Suessen presents the new compacting devices for high flexibility, new weighting arms and premium rotor spinning components for excellent yarn quality.
COMPACTeasy is the new mechanical compacting device available as a plugon/ plug-off unit for any ring spinning machine type and suitable for most common applications like cotton, man-made fibers and blends. COMPACTeasy is the solution in compacting without additional energy requirement.

New EliTe is a versatile compact-spinning system with new innovative components. The customers profit from higher productivity, better quality and lower operational costs. Upgrade packages and spare parts packages enable the customers to benefit also on existing installations.

The new Top Weighting Arm HP 4080 for roving frames offers a new design for easy settings and improved stability. In addition, consistent yarn quality over the lifetime is guaranteed.

Suessen presents the new compacting devices for high flexibility, new weighting arms and premium rotor spinning components for excellent yarn quality.
COMPACTeasy is the new mechanical compacting device available as a plugon/ plug-off unit for any ring spinning machine type and suitable for most common applications like cotton, man-made fibers and blends. COMPACTeasy is the solution in compacting without additional energy requirement.

New EliTe is a versatile compact-spinning system with new innovative components. The customers profit from higher productivity, better quality and lower operational costs. Upgrade packages and spare parts packages enable the customers to benefit also on existing installations.

The new Top Weighting Arm HP 4080 for roving frames offers a new design for easy settings and improved stability. In addition, consistent yarn quality over the lifetime is guaranteed.

More information:
Suessen ShanghaiTex
Source:

Rieter Management AG

© SSM Schärer Schweiter Mettler AG
24.10.2019

SSM at ShanghaiTex 2019

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

For the XENO-platform SSM presents the first and only self-regulating backpressure system in the world: preciforce™ for a guaranteed package consistency. Furthermore, the next generation of the blade winding powerblade™ will be introduced for the XENO-platform.

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

For the XENO-platform SSM presents the first and only self-regulating backpressure system in the world: preciforce™ for a guaranteed package consistency. Furthermore, the next generation of the blade winding powerblade™ will be introduced for the XENO-platform.

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019 (c) Saurer AG
FusionTwister for staple fibre yarns
26.09.2019

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

Monforts (c) A. Monforts Textilmaschinen GmbH & Co. KG
02.09.2019

Monforts: Responding to China’s requirements in 2019

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.