From the Sector

Reset
95 results
18.09.2019

Hexcel to Exhibit at CAMX 2019

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

With 50 years of experience and the most qualified carbon fiber positions on aerospace programs in the industry with its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing a new fiber to its portfolio. HexTow® HM54 combines high modulus and high tensile strength, which allows structural designers to achieve higher safety margins for both stiffness and strength-critical applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications, examples of golfing applications will be on display.

Additive manufacturing is on the forefront of innovation for composite technologies, and Hexcel is leading the way with its HexAM® additive manufacturing process. HexAM® additive manufacturing combines high performance PEKK thermoplastics with carbon fiber to produce flight-ready 3D printed HexPEKK® parts. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

HexPly® M77 snap-cure prepregs are yet another example of Hexcel technology leading the way. HexPly® M77HF, the latest member of this quick-curing prepreg family, is revolutionizing the world of composites for high-performance sporting goods with its faster production times and excellent surface quality. It will be featured in the Hexcel booth in two products – a carbon fiber Goode water ski which is setting records in the competitive world with its precision and durability, and in a HED cycling wheel noted for its aerodynamics and light weight.

Among Hexcel’s latest technologies are the RF Interference Control materials made by ARC Technologies, a Hexcel company. A selection of these industry-leading custom RF / EMI and microwave absorbing composite materials for military, aerospace and industrial applications will be on display at the Hexcel booth.

HexForce® bias weave woven reinforcements are a patented solution to optimize material usage. These bias weave reinforcements are continuous rolls of carbon fiber fabric in which the warp and weft yarns are oriented on the bias at +/- 45° which can reduce prepreg waste up to 60%. Visitors at CAMX will be able to see this new woven reinforcement and learn more.

Source:

AGENCE APOCOPE

(c) Roof courtesy
09.09.2019

CHOMARAT’S CARBON RANGE IN THE SPOTLIGHT AT CAMX 2019 EXPO

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

Moreover, Chomarat is displaying a motorcycle helmet with exposed carbon and a very light kayak paddle, highlighting the properties of C-WeaveTM. A tennis racket using C-PLYTM will also be displayed at the show.

 

More information:
CHOMARAT
Source:

APOCOPE Agency

09.07.2019

Asia-Pacific composites community to meet at JEC Asia and eMove360° Asia

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

  • 7,000+ professional visits
  • 245+ exhibiting companies from 49 countries
  • 3 conference sessions
  • 40+ International speakers
  • 450+ business meetings
  • Startup Booster competition
  • Innovation awards and planet
  • In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

  • 7,000+ professional visits
  • 245+ exhibiting companies from 49 countries
  • 3 conference sessions
  • 40+ International speakers
  • 450+ business meetings
  • Startup Booster competition
  • Innovation awards and planet
  • In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

Addressing the impact of composites in Mobility 4.0

During the press conference held in Seoul on July 9th to introduce JEC Asia 2019 and eMove Asia 360° main features, a roundtable gathering speakers, experts and academics from prestigious Korean research centers specialized in carbon and composites — along with Hyundai Motor and KCTech composites experts, eMove360°’s CEO & Publisher and Korean Electric Vehicle Association representatives — exchanged their views on the impact of composites in today's and tomorrow's mobility in the world with a focus on the Korean market. Discussions centered around the challenges raised by Mobility 4.0 (electric connected and autonomous vehicles) and how composites can offer highly adapted solutions for the new challenges faced by this sector, particularly in the context of the rising electrification of vehicles.

Hence, the 2019 edition of JEC Asia will welcome for the first time the eMove360° ASIA exhibition and conferences focusing on Trends in electric & autonomous mobility, Battery & Powertrain and Charging & Energy.

Celebrating Innovation and Knowledge

JEC Asia 2019 will also host the 2nd leg of the JEC Startup Booster competition, the leading startup competition in the world of composites will enable companies to find and assess innovations with a potential impact on their respective industry. The 10 finalists selected in the region by a prestigious jury, will pitch their project to win a chance to showcase their work at JEC World 2020 in Paris. The JEC Innovation Awards is a long-established and worldwide program with 3 simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations. The award ceremony will take place on the second day of JEC Asia, on November 14th, 2019.

JEC Asia 2019 will also feature a fulfilling conference program with experts from the industry giving their insights on the latest developments in high-performance composite technologies and applications.

JEC Asia 2019 conferences main themes will focus on:

• International Carbon Festival Conference organized with our partner, KCTech.
• Automotive composite golden triangle: low CAPEX, low cost but high volume
• Automotive hybrid solutions: take the best of each material
• Aeronautics: faster processes and new materials
• Business opportunities (Raw materials, Process, Application, Countries, Region)
Finally, JEC Asia offers the opportunity to visit Composites sites. This year professionals will live a full experience of South Korea composites Industry visiting: Hanyang University, Kookmin University with Hankuk Carbon, Win & Win Co or Korean Carbon with KCTech in Jeonju.

See you @JEC Asia 2019 and eMove360° Asia, November 13 to 15,  Seoul Coex Convention and Exhibition Center

Source:

AGENCE APOCOPE

(c) IRO AB
05.07.2019

IRO AB: Zero twist for composite fabrics guaranteed

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

More information:
IRO AB Vandewiele ITMA 2019
Source:

TMAS by AWOL Media.

(c) JEC Group
21.06.2019

JEC Forum Chicago 2019: A great success for this new format

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.


Business and Knowledge all at once
The forum was the occasion for sponsors to showcase their solutions, industry buyers from all the composites value-chain to easily meet during pre-arranged business, without mentioning a great participation of Top buyers from Arevo, Bollinger Motors, Bouygues – CBNA: Civil & Building North America, and Florida Department of Transportation and John Deere. All confirmed that their meetings were very successful and would be leading to prolific cooperation in the future.

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.


Business and Knowledge all at once
The forum was the occasion for sponsors to showcase their solutions, industry buyers from all the composites value-chain to easily meet during pre-arranged business, without mentioning a great participation of Top buyers from Arevo, Bollinger Motors, Bouygues – CBNA: Civil & Building North America, and Florida Department of Transportation and John Deere. All confirmed that their meetings were very successful and would be leading to prolific cooperation in the future.

11.06.2019

Hexcel at Paris Air Show 2019: Le Bourget, 17 – 23 June

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

Hexcel honeycomb saves weight and enhances stiffness in composite structures, and the company provides a range of engineered core solutions that enable highly contoured parts with precision profiling to be produced to exact customer specifications. A sample part made from aluminum FlexCore® that is CNC machined on both sides and formed and stabilized with both peel ply and flyaway layers of stabilization will be on display.

Another honeycomb innovation is Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.
Another Hexcel technology to benefit aircraft engines is HexShield™ honeycomb which provides high-temperature resistance in nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential reuse of material after a fire.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

Another area of expertise that uses HexTow® carbon fiber is additive manufacturing, where Hexcel uses PEKK ultrahigh performance polymers and HexAM™ technology to manufacture carbon reinforced 3D printed parts. This innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Later this year Hexcel will open a joint research and development laboratory in Les Avenières (Isère), France with Arkema to develop carbon fiber-reinforced thermoplastic prepreg tapes for aerospace, space and defense applications. A spool of thermoplastic prepreg tape will be on display on Hexcel’s stand to showcase this cost-effective technology that enables lightweight parts to be produced in faster production cycles for future generations of aircraft.

Hexcel’s stand is located next to Hexcel’s official distributor for aerospace products, Groupe Gazechim Composites. In 2018, Hexcel and Gazechim formed a joint venture, HexCut Services, to provide aerospace and defense customers with customized kitting services that include Hexcel’s innovative carbon fiber prepreg, fabrics and adhesives. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

More information:
Hexcel Paris Air Show Composites
Source:

AGENCE APOCOPE

13.05.2019

The JEC Composites Observer

Looking for up to date global figures of the Composites materials market?
Wondering what is the size of this market in each region of the world?
Hunting for the growth potential per type of material and per industry?

The JEC Composites Observer will address all these questions giving graphs, key figures, market dynamics, opinion statements and insights to illustrate the state of composites globally.
This publication is not just an overview of the composites market: as this first edition is set to become an annual rendez-vous, industrials and application industrials will also be regularly provided with key figures, trends and opportunities in order to develop their business and have an in-depth comprehension of the global composites market.

This specific edition is rife with market data and growth forecast from 2018 to 2023 that will include meaningful market news, trends, figures and growth prospects by:
- Key geographic regions,
- Industrial sectors including Aerospace, Transportation and Automotive, Wind Energy, Marine, Building and Construction and Manufacturing.

Looking for up to date global figures of the Composites materials market?
Wondering what is the size of this market in each region of the world?
Hunting for the growth potential per type of material and per industry?

The JEC Composites Observer will address all these questions giving graphs, key figures, market dynamics, opinion statements and insights to illustrate the state of composites globally.
This publication is not just an overview of the composites market: as this first edition is set to become an annual rendez-vous, industrials and application industrials will also be regularly provided with key figures, trends and opportunities in order to develop their business and have an in-depth comprehension of the global composites market.

This specific edition is rife with market data and growth forecast from 2018 to 2023 that will include meaningful market news, trends, figures and growth prospects by:
- Key geographic regions,
- Industrial sectors including Aerospace, Transportation and Automotive, Wind Energy, Marine, Building and Construction and Manufacturing.

To mark this new JEC Group publication release, a synthesis of The JEC Composites Observer will be presented on June 20th at 8 am during JEC Forum Chicago at Navy Pier.

More information:
JEC Group
Source:

AGENCE APOCOPE

(c) TMAS
26.04.2019

Innovate or die: TMAS at ITMA 2019

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

More information:
TMAS ITMA 2019
Source:

Issued on behalf of TMAS by AWOL Media.

25.03.2019

JEC Group unveils the winners of the JEC Innovation Awards at JEC World 2019

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

The jury then announced the ten composite innovation champions selected among 30 finalists, from more than a hundred entries, and the public awarded its prize.
"JEC Group supports innovation and has created the Composites Reference Prize to reward industry champions and promote their innovations. Every year, we receive more than a hundred applications from all over the world," explains Franck Glowacz, Composites Expert at JEC Group.

Download the PDF to see all winning companies.

 

Source:

AGENCE APOCOPE

22.03.2019

SMART COMPOSITES: IPC UNVEILS AN INTELLIGENT MOTORCYCLE HELMET AND A MULTIFUNCTIONAL WIND TURBINE BLADE

IPC, the Industrial Technical Centre with expertise dedicated to plastic and composite innovation, is presenting two prototypes on its stand: an intelligent motorcycle helmet and a multifunctional windturbine blade. "With these two prototypes, IPC demonstrates its ability to functionalize composites, particularly with printed electronic components. Live demos will be organized during the three days of the show on our booth," explains Bertrand Fillon, General Manager of Research at IPC. The helmet was manufactured in partnership with the technical and creative paper manufacturer Arjowiggins, and the wind turbine blade, with the CEA. These two demonstrators will also be exhibited in Germany at the LOPEC exhibition 2019 in Munich on 20-21 March.

IPC, the Industrial Technical Centre with expertise dedicated to plastic and composite innovation, is presenting two prototypes on its stand: an intelligent motorcycle helmet and a multifunctional windturbine blade. "With these two prototypes, IPC demonstrates its ability to functionalize composites, particularly with printed electronic components. Live demos will be organized during the three days of the show on our booth," explains Bertrand Fillon, General Manager of Research at IPC. The helmet was manufactured in partnership with the technical and creative paper manufacturer Arjowiggins, and the wind turbine blade, with the CEA. These two demonstrators will also be exhibited in Germany at the LOPEC exhibition 2019 in Munich on 20-21 March.

IMPROVE THE USER EXPERIENCE
The objective is to add new features to improve the user experience, without impacting security. The motorcycle helmet is equipped with sensors and NFC communication functions. "Here, printed organic electronics are used in the helmet to allow remote temperature changes," adds Lionel Tenchine, Program Line Manager for "Technologies for Intelligent Products" at IPC. The helmet manufacturing process is based on the use of composites and the infusion process.

DETECTING POTENTIAL DAMAGE IN ADVANCE
Developing predictive maintenance is an important issue when it comes to avoiding sudden, serious accidents. A recent McKinsey study estimates that by 2025 it will save $630 billion for companies, for example. The wind turbine blade presented at JEC World detects potential damage that could occur on the blade structure beforehand, making it possible to carry out preventive repairs on the one-meter-long blade. Printed organic electronics are used in the demonstrator to integrate strain gauges and the temperature detection function.

More information:
IPC JEC World 2019
Source:

AGENCE APOCOPE

21.03.2019

JEC WORLD REINFORCES ITS LEADERSHIP AS THE FOREMOST EVENT OF THE COMPOSITE MATERIALS INDUSTRY

JEC WORLD 2019 closed successfully on Thursday, March 14, after three intense days of innovation, networking and knowledge sharing. "With more than 112 participating countries and 27 national pavilions, JEC World – the place where the world of Composites meets – gathered the key players of the industry and their representatives, as illustrated by the premiere meeting of the global and European industry associations. On top of that, the show highlighted the dynamic ecosystems of composite materials in France, Turkey as well as in the Netherlands, thanks to the special visit in Paris and an active participation of their companies, officials and government bodies,” Adeline Larroque, Show director JEC World explains.
JEC World organizers created special tracks, displays and conference programs dedicated to the specific audience of Aerospace, Automotive and Construction sectors, for everyone to better understand the benefits offered by Composites in these applications.

JEC WORLD 2019 closed successfully on Thursday, March 14, after three intense days of innovation, networking and knowledge sharing. "With more than 112 participating countries and 27 national pavilions, JEC World – the place where the world of Composites meets – gathered the key players of the industry and their representatives, as illustrated by the premiere meeting of the global and European industry associations. On top of that, the show highlighted the dynamic ecosystems of composite materials in France, Turkey as well as in the Netherlands, thanks to the special visit in Paris and an active participation of their companies, officials and government bodies,” Adeline Larroque, Show director JEC World explains.
JEC World organizers created special tracks, displays and conference programs dedicated to the specific audience of Aerospace, Automotive and Construction sectors, for everyone to better understand the benefits offered by Composites in these applications.

More information:
JEC World JEC World 2019
Source:

AGENCE APOCOPE

12.03.2019

JEC WORLD 2019: 3 winners of the Startup Booster competition

JEC WORLD 2019 is turning Paris into the composites capital of the world.

As well as dozens of conferences, composites circles and live demos, plus hundreds of other events, the first day of the show was marked by the announcement of the three winners of the largest international startup competition in the composites field!

In the last three years, 270 projects have been picked out from over 30 countries, with 30 finalists and a total of nine winners.

THREE WINNERS
Ten finalists selected from 120 entries pitched to an international jury. The pitch session opened with an inspiring speech by Enrico Palermo, President of The Spaceship Company. He introduced the next generation of reusable space vehicles and their impact on costs, safety and the environment during the launch into space.
The programme incited enthusiasm from Peter Hopwood, founder of Hopwood Communications, who encouraged the finalists to develop their stage presence and galvanise their pitches.

At the afternoon’s award ceremony, three competitors were selected for the following prizes:

JEC WORLD 2019 is turning Paris into the composites capital of the world.

As well as dozens of conferences, composites circles and live demos, plus hundreds of other events, the first day of the show was marked by the announcement of the three winners of the largest international startup competition in the composites field!

In the last three years, 270 projects have been picked out from over 30 countries, with 30 finalists and a total of nine winners.

THREE WINNERS
Ten finalists selected from 120 entries pitched to an international jury. The pitch session opened with an inspiring speech by Enrico Palermo, President of The Spaceship Company. He introduced the next generation of reusable space vehicles and their impact on costs, safety and the environment during the launch into space.
The programme incited enthusiasm from Peter Hopwood, founder of Hopwood Communications, who encouraged the finalists to develop their stage presence and galvanise their pitches.

At the afternoon’s award ceremony, three competitors were selected for the following prizes:

AIRGO DESIGN (Singapore)
World's first full composite economy class passenger seat developer.
www.airgodesign.com

AREVO (USA)
Delivering the future of composite manufacturing today through breakthrough advancements in software, materials, and robotics. Through enabling the 3D printing of large, mass-produced parts and structures, AREVO is revolutionizing mainstream manufacturing and the global supply chain.
www.arevo.com

WOODOO (France)
Augmented wood.
https://woodoo.fr

The public vote: LAVOISIER COMPOSITES (France)
New generation of material entirely sourced from the French aerospace transformation sector.
www.lavoisier-composites.com

More information:
JEC World
Source:

Apocope Agency

(c) CHOMARAT
04.03.2019

Chomarat Carbon Reinforcements at JEC WORLD 2019

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

 

Source:

AGENCE APOCOPE

(c) AZL Aachen GmbH
04.03.2019

AZL demonstrates new Ultra-Fast Consolidator Machine at JEC World in Paris

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

This year, AZL is very proud to present a new machine system development at their booth:
The real machine setup of the “Ultra-Fast Consolidator Machine” will be shown at the AZL booth (Hall 5A, D17) which is one of three finalists for the JEC AWARD 2019 in the category “Industry and Equipment”.

More information:
SMC, AZL, RWTH Aachen AZL
Source:

AZL Aachen GmbH

(c) JEC World 2019
27.02.2019

JEC World 2019 to organise an inspiring program for professionals

For this 2019 edition, JEC World organizes for building, automotive and aerospace professionals a full program of conferences, round tables, dedicated showcases… to present trends & innovations where composites are at the heart of the challenges to come, the new mobility challenges.

JEC WORLD 2019 CONSTRUCTION PROGRAM:

  • 1 technical conference  
  • +30 innovative parts within Building and Energy planet
  • Composites exchange workshop
  • 3 Finalists for Innovation Awards
  • Pre-arranged Business meetings
  • Construction Composites Circle

Please find here more information about JEC World 2019 Construction program.

JEC WORLD 2019 AUTOMOTIVE PROGRAM:

For this 2019 edition, JEC World organizes for building, automotive and aerospace professionals a full program of conferences, round tables, dedicated showcases… to present trends & innovations where composites are at the heart of the challenges to come, the new mobility challenges.

JEC WORLD 2019 CONSTRUCTION PROGRAM:

  • 1 technical conference  
  • +30 innovative parts within Building and Energy planet
  • Composites exchange workshop
  • 3 Finalists for Innovation Awards
  • Pre-arranged Business meetings
  • Construction Composites Circle

Please find here more information about JEC World 2019 Construction program.

JEC WORLD 2019 AUTOMOTIVE PROGRAM:

  • 1 technical conference  
  • +50 innovative parts within Auto&Transport Planet
  • Composites exchange workshops
  • 6 Finalists for the Innovation Awards
  • Pre-arranged Business meetings
  • Automotive Composites Circle

Please find here more information about JEC World 2019 Automotive program.

JEC WORLD 2019 AEROSPACE PROGRAM:

  • 1 technical conference  
  • +50 innovative parts within Aero&Space planet
  • Composites exchange workshop
  • 6 Finalists for Innovation Awards
  • Pre-arranged Business meetings
  • Aerospace Composites Circle

Please find here more information about JEC World 2019 Aerospace program.

Source:

AGENCE APOCOPE

3. Fachkongress Composite Recycling & LCA zeigte Lösungswege auf (c) AFBW e.V.
21.02.2019

3. Fachkongress Composite Recycling & LCA zeigte Lösungswege auf

Zum dritten Mal veranstalteten die DITF Denkendorf, CC Baden-Württemberg (CC BW) – eine Abteilung des Carbon Composites e.V. - und die Allianz Faserbasierte Werkstoffe Baden-Württemberg (AFBW) am 20. und 21. Februar 2019 gemeinsam den Fachkongress Composite Recycling & LCA im Haus der Wirtschaft in Stuttgart.

Der Einsatz von Faserverbundmaterialien- und –Strukturen ist mehr denn je ein Wachstumsmarkt. Insbesondere die CFK-Branche weist eine jährliche Wachstumsrate von ca. 12% auf. Carbonfaserverstärkte Kunststoffe (CFK) werden aufgrund ihres Leichtbaupotenzials in vielen Branchen und immer neuen Anwendungen eingesetzt. Mit ihrem zunehmenden Einsatz gewinnt neben Ressourceneffizienz und Nachhaltigkeit auch die Frage des Recyclings, der Entsorgung und vor allem auch das Live Cycle Assessment von Produkten immer mehr an Bedeutung. Über den weiteren Erfolg und serienmäßigen Einsatz von Faserverbund-Composites wird nicht zuletzt ihre wirtschaftliche Weiter- und Wiederverwendung und die Frage nach dem „end-of-life“ von Materialien und Produkten entscheiden. Dafür müssen gangbare und nachhaltige Wege beschritten werden.

Zum dritten Mal veranstalteten die DITF Denkendorf, CC Baden-Württemberg (CC BW) – eine Abteilung des Carbon Composites e.V. - und die Allianz Faserbasierte Werkstoffe Baden-Württemberg (AFBW) am 20. und 21. Februar 2019 gemeinsam den Fachkongress Composite Recycling & LCA im Haus der Wirtschaft in Stuttgart.

Der Einsatz von Faserverbundmaterialien- und –Strukturen ist mehr denn je ein Wachstumsmarkt. Insbesondere die CFK-Branche weist eine jährliche Wachstumsrate von ca. 12% auf. Carbonfaserverstärkte Kunststoffe (CFK) werden aufgrund ihres Leichtbaupotenzials in vielen Branchen und immer neuen Anwendungen eingesetzt. Mit ihrem zunehmenden Einsatz gewinnt neben Ressourceneffizienz und Nachhaltigkeit auch die Frage des Recyclings, der Entsorgung und vor allem auch das Live Cycle Assessment von Produkten immer mehr an Bedeutung. Über den weiteren Erfolg und serienmäßigen Einsatz von Faserverbund-Composites wird nicht zuletzt ihre wirtschaftliche Weiter- und Wiederverwendung und die Frage nach dem „end-of-life“ von Materialien und Produkten entscheiden. Dafür müssen gangbare und nachhaltige Wege beschritten werden.

Mit dem Fachkongress COMPOSITE RECYCLING & LCA am 20. und 21. Februar 2019 griffen die Branchennetzwerke AFBW und CC BW zusammen mit den DITF Denkendorf dieses Thema auf. Namhafte Referenten boten einen Einblick in neue Technologien, Verfahren, Anwendungen und Life Cycle Assessment Tools und deren Einsatz. Eingeleitet wurde die Veranstaltung mit einem Grußwort der Landesregierung durch Ministerialdirektor Michael Kleiner, einem Beitrag der Landesagentur Umwelttechnik BW durch Dr. Hannes Spieth und einer Keynote zum strategischen Ausblick über die Initiative Leichtbau des BMWi durch Werner Loscheider.

In den drei Themenblöcken - Anforderungen & Verfahren, Anwendungen & rezyklate Produkte, LCA Tools & Einsatz wurden neue, intelligente und nachhaltige Lösungen präsentiert. Betrachtet wurden u.a. neue Verfahren für die Trennung und die ganzheitliche Rückgewinnung von Faserund Matrixmaterialien, die Weiterverarbeitung zu einsetzbaren Halbzeugen in Form von Garnen und Vliesen, Anwendungsbeispiele und Potenziale für rCF und die Entsorgung von carbonfaserhaltigen Reststoffen.

More information:
Composites AFBW
Source:

AFBW - Allianz Faserbasierte Werkstoffe Baden-Württemberg e.V.

“mtex+” textile fair & convention raises profile and increases international appeal (c) mtex+ / Kristin Schmidt
These Czech exhibitors presented technical textiles and lightweight textile components at the 2018 “mtex+” at Chemnitz Trade Fair Centre. The 8th “mtex+” is being held as the “Fair & Convention for Hightech Textiles” in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 – 10 June 2020.
20.02.2019

“mtex+” textile fair & convention raises profile and increases international appeal

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

More information:
mtex
Source:

vti-pressedienst      mtex+ press service

05.02.2019

The 10 Startups shaking the Composites Industry at JEC World 2019

After the success of the two first editions, JEC World organizes the third edition of Startup Booster, the leading startup competition in Composites, where ten startups will present their innovation in front of a jury of experts.

EC Group launched Startup Booster programme in 2017 to get closer to the startup world, to attract the new generation of composites entrepreneurs and put them at the forefront of the industry.

The program gives the floor to 10 startups, each of them having five minutes to present their innovation, on March 12, 2019, from 10.30 AM in Agora Stage (Hall 5) in front of a jury of experts from the composites industry.

These 10 startups will be also showcasing within the Startup Booster Village, during the three days, and will benefit from a dedicated program, including workshops with Startup Booster Main Innovation partners’ Airbus & Daimler, and Innovation partner’s Altair.

After the success of the two first editions, JEC World organizes the third edition of Startup Booster, the leading startup competition in Composites, where ten startups will present their innovation in front of a jury of experts.

EC Group launched Startup Booster programme in 2017 to get closer to the startup world, to attract the new generation of composites entrepreneurs and put them at the forefront of the industry.

The program gives the floor to 10 startups, each of them having five minutes to present their innovation, on March 12, 2019, from 10.30 AM in Agora Stage (Hall 5) in front of a jury of experts from the composites industry.

These 10 startups will be also showcasing within the Startup Booster Village, during the three days, and will benefit from a dedicated program, including workshops with Startup Booster Main Innovation partners’ Airbus & Daimler, and Innovation partner’s Altair.

“Daimler being one of the main Innovation Partner of the Startup Booster, we are looking for innovations, in particular sustainable technologies and processes”, said Dr. Karl-Heinz FUELLER, Responsible for material innovations and BIW concept development, Daimler AG.

“As a main Innovation Partner of the Startup Booster competition we get fantastic direct engagement with the innovators who are defining solutions for the future”, said Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite at Airbus.

More information:
JEC World JEC World 2019
Source:

Agence APOCOPE

(c) JEC Group
21.11.2018

Celebration of Composite Materials at the 11th JEC Asia

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

More information:
JEC-Gruppe
Source:

JEC Group

Concrete bar stool with hybrid carbon reinforcement for fast, cost-efficient part production (c) Institut für Textiltechnik of RWTH Aachen University
29.10.2018

ITA at the Composites Europe 2018 in Stuttgart

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the ITA, the two industrial partners Albani Group GmbH & Co. KG and DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH developed a new hybrid reinforcement with integrated spacer. This hybrid reinforcement reduces the time required to position the reinforcement by up to 60 percent and thus makes the material significantly more

The new, cost-effective hybrid reinforcement contains an integrated spacer and thus faciliates the positioning of dry and coated reinforcements. The integrated spacer allows several layers of reinforcement to be stacked quickly, allowing the desired degree of reinforcement to be set. The hybrid reinforcement consists of a carbon or glass fibre grid joined with a permeable polyamide mat and will be available in roll form from industrial partners in the near future.

More information:
Composites AZL
Source:

Institut für Textiltechnik of RWTH Aachen University