From the Sector

Reset
23 results
DITF: CO2-negative construction with new composite material Photo: DITF
Structure of the wall element
20.03.2024

DITF: CO2-negative construction with new composite material

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO2 balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO2 balance of the new building material is actually negative, making it possible to construct CO2-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO2 storage, which plays a significant role in the CO2 balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO2 balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO2 balance of 157 CO2 equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

Source:

Deutsche Institute für Textil- und Faserforschung

Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics) © Business Angels Deutschland e. V. (BAND)
Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics)
26.01.2024

Start-up: Bio-based aerogel fibres replace synthetic insulation materials

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

"We can revolutionise the construction world with bio-based aerogel fibres," explains ITA founder Dr Sascha Schriever proudly. "If all insulation materials in construction are converted to bio-based aerogel fibres, all builders can realise their dream of a sustainable house."

SA Dynamics has come a good deal closer to its founding goal by winning the KUER.NRW 2023 business plan competition. The spin-off from Institut für Textiltechnik (ITA) and Department for Industrial Furnaces and Heat Engineering (IOB) at RWTH Aachen University is scheduled for spring 2025.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

Three Swiss Brands introduce the "Extraordinary Jacket" Photo: Mammut
The Extraordinary Jacket, a joint development by Nespresso, Mammut, and HeiQ
06.11.2023

Three Swiss Brands introduce the "Extraordinary Jacket"

In a celebration of Innovation and Swiss identity the three brands Nespresso, Mammut, and HeiQ have joined forces to create the "Extraordinary Jacket".

The Extraordinary Jacket is a testament to Swiss design and innovation. Mammut's super-light Ajungilak® insulation now incorporates HeiQ XReflex technology powered by Xefco, which contains part of the aluminum from recycled Nespresso capsules.

Being up in the mountains comes with significant temperature drops. Mammut, HeiQ and Nespresso have cocreated this high-performance insulation jacket that delivers great heat retention while being breathable, so one can enjoy more time above the tree line.

What makes the Extraordinary Jacket genuinely extraordinary is its ability to retain 20% more heat than a conventional insulation jacket of similar thickness. The innovative HeiQ XReflex 3D aluminized scrim layer reflects the body's heat radiation within the insulation layers, so the wearer doesn’t have to produce more energy to stay warm, resulting in effortless comfort even in harsh and demanding conditions.

In a celebration of Innovation and Swiss identity the three brands Nespresso, Mammut, and HeiQ have joined forces to create the "Extraordinary Jacket".

The Extraordinary Jacket is a testament to Swiss design and innovation. Mammut's super-light Ajungilak® insulation now incorporates HeiQ XReflex technology powered by Xefco, which contains part of the aluminum from recycled Nespresso capsules.

Being up in the mountains comes with significant temperature drops. Mammut, HeiQ and Nespresso have cocreated this high-performance insulation jacket that delivers great heat retention while being breathable, so one can enjoy more time above the tree line.

What makes the Extraordinary Jacket genuinely extraordinary is its ability to retain 20% more heat than a conventional insulation jacket of similar thickness. The innovative HeiQ XReflex 3D aluminized scrim layer reflects the body's heat radiation within the insulation layers, so the wearer doesn’t have to produce more energy to stay warm, resulting in effortless comfort even in harsh and demanding conditions.

Freudenberg´s comfortemp® FIBERBALL WB Series © Freudenberg Performance Materials
Freudenberg´s comfortemp® FIBERBALL WB Series
26.10.2023

Freudenberg launches sustainable, low-level BPA thermal insulation products

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

GRS-certified and OEKO-TEX® STANDARD 100 Class I certifications
Both products utilize 100% GRS-certified rPET fibers, customizable to any desired fill levels. Additionally, these new products not only comply with but significantly surpass the stringent OEKO-TEX® STANDARD 100 Class I certifications. While OEKO-TEX® categorizes low-level BPA as less than 100 parts per million (ppm), these new products contain less than 1 ppm BPA, a testament to Freudenberg’s unyielding standards.

DOWN FEEL WA 150LB and FIBERBALL WB 400LB are available globally and more low-level BPA thermal insulation options are available in Asia.

Source:

Freudenberg Performance Materials

18.10.2023

SHIMA SEIKI at A+A 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI's original SPG®, developed in 1979 as the world’s first automatic glove knitting machine to produce seamless pile-knitted gloves, is now reborn as a next-generation model. Pile gloves feature special traits that include cushioning, shock-reduction and thermal insulation and cold protection, making them popular especially in the field of industrial safety. Now, SPG® is redesigned from the ground up and re-introduced as the SPG®-R. The new SPG®-R features a new moveable sinker system with selectable loop presser function. Combined with a new belt-driven carriage it allows SPG® to provide efficient and reliable production of fashionable, high-quality pile gloves. Shown in 7 gauge at A+A, SPG®-R surpasses the previous generation with pioneering technology, improved capability and reliable productivity.

SHIMA SEIKI's original product on which the company was founded was the fully automated seamless glove knitting machine. While the original model evolved to become the current SFG® series, SFG®-R exhibited at A+A is its spiritual successor. With a new sinker system, a belt-driven 2-cam carriage and auto yarn carriers SFG®-R is a completely new machine for knitting gloves that conform better to the shape of the hand for improved fit. Furthermore its greater design potential offers users the opportunity to break out of the work glove market and into the fashion market. SFG®-R is shown as a prototype next-generation model in 12 gauge at A+A.

Also demonstrated will be SHIMA SEIKI's APEXFiz® design software. The importance of design software is made even more significant by the new patterning capabilities of SPG®-R and SFG®-R. Both machines now feature increased design potential that allow each of their products—pile gloves and work gloves, respectively—to expand their market into fashion. APEXFiz® is available for developing these designs. Furthermore virtual sampling on APEXFiz® is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation, thereby minimizing the time, cost and resources normally required with sample-making, supporting smart, speedy and sustainable production.

Source:

SHIMA SEIKI MFG., LTD.

PrimaLoft expands Active Insulation Range (c) PrimaLoft, Inc.
28.07.2023

PrimaLoft expands Active Insulation Range

PrimaLoft, Inc., a leader in advanced material technology, is expanding its  Active Insulation Range by adding four new Active Evolve styles, reaffirming its commitment to providing cutting-edge solutions that meet the evolving needs of consumers.

Originally launched in 2018, PrimaLoft Active Evolve is a line of insulating fabrics that is designed to evolve performance, design, and sustainability. Combining the lightweight warmth of insulation with the breathability of fabric, this technology is developed to perform in a wide range of activities, regardless of intensity or season. From pushing yourself during a cross country ski tour, to working up a sweat hiking to the next peak, PrimaLoft Active Evolve keeps you in your comfort zone – even when you’re pushing yourself out of it.

PrimaLoft, Inc., a leader in advanced material technology, is expanding its  Active Insulation Range by adding four new Active Evolve styles, reaffirming its commitment to providing cutting-edge solutions that meet the evolving needs of consumers.

Originally launched in 2018, PrimaLoft Active Evolve is a line of insulating fabrics that is designed to evolve performance, design, and sustainability. Combining the lightweight warmth of insulation with the breathability of fabric, this technology is developed to perform in a wide range of activities, regardless of intensity or season. From pushing yourself during a cross country ski tour, to working up a sweat hiking to the next peak, PrimaLoft Active Evolve keeps you in your comfort zone – even when you’re pushing yourself out of it.

Several products in the Active Evolve line can be used as a next-to-skin fabric. This enables brands to forego liner fabrics, which means heat and moisture are more efficiently managed, breathability is supported, and user comfort is maintained. In addition to achieving optimal performance during aerobic activity, this yields a wider utility and year-round use, all while allowing brands to use less overall material when designing a garment, reducing footprint and waste.

PrimaLoft Active Evolve offers several advantages to designers. It enables them to utilize the full spectrum of color, incorporate unique patterns, and provides greater flexibility in fabric selection. Additionally, Active Evolve eliminates the need for quilting in the design process. Products within the Active Evolve line are made from up to 100% post-consumer recycled content, including three of the four new styles.

With more than a dozen brand adoptions thus far, PrimaLoft Active Evolve’s adaptability for the user, range of use across activities, and seasonal timing, is quickly making this one of the most versatile products in the PrimaLoft portfolio. For Fall/Winter 2023-2024, key partner brands beside Sitka and Löffler will include CP Company, Eddie Bauer, Endura, Martini Sportswear, OMM, Quiksilver, Ziener and more.

Source:

PrimaLoft, Inc.

(c) Freudenberg Performance Materials Holding GmbH
24.05.2023

Freudenberg: “Material Health” certification for comfortemp® product series

The thermal insulation in the product series comfortemp® soft HO 80x from Freudenberg Performance Materials Apparel (Freudenberg) has achieved Gold status in the Material Health category of the Cradle to Cradle Certified® Product Standard Version 3.1.

The soft thermal insulation of the HO 80x soft series (HO 803, HO 804, HO 805, HO 806) is made from polyamide 6 wadding and is multiple recyclable in terms of a sustainable circular economy. The wadding is also characterized by high wearing comfort, making it suitable for sustainable applications in the luxury, sportswear and outdoor sectors. Thanks to its construction as roll goods, the wadding does not clump and can endure multiple wash cycles at 40°C.

Certifications by the Cradle to Cradle Products Innovation Institute are based on testing for hazardous materials in products and processes. Plus, the impact of chemical substances is assessed on the three product life cycle phases: final manufacture, use and end of use. Freudenberg will continue optimizing its products to ensure material safety and quality for future use and cycling.

The thermal insulation in the product series comfortemp® soft HO 80x from Freudenberg Performance Materials Apparel (Freudenberg) has achieved Gold status in the Material Health category of the Cradle to Cradle Certified® Product Standard Version 3.1.

The soft thermal insulation of the HO 80x soft series (HO 803, HO 804, HO 805, HO 806) is made from polyamide 6 wadding and is multiple recyclable in terms of a sustainable circular economy. The wadding is also characterized by high wearing comfort, making it suitable for sustainable applications in the luxury, sportswear and outdoor sectors. Thanks to its construction as roll goods, the wadding does not clump and can endure multiple wash cycles at 40°C.

Certifications by the Cradle to Cradle Products Innovation Institute are based on testing for hazardous materials in products and processes. Plus, the impact of chemical substances is assessed on the three product life cycle phases: final manufacture, use and end of use. Freudenberg will continue optimizing its products to ensure material safety and quality for future use and cycling.

Source:

Freudenberg Performance Materials Holding GmbH

16.05.2023

DiloGroup cooperates with Dell’Orco & Villani and TechnoPlants

With regard to current and imminent requirements to strengthen and promote the recycling of garment waste in order to safe valuable textile fibre in the European but also worldwide textile economy DiloGroup announces the start of a close cooperation between Dilo, Germany and the Italian companies Dell’Orco & Villani and TechnoPlants. This cooperation forms a group of expertise to supply complete projects in the area of textile recycling.

Dell’Orco & Villani is a long term highly experienced and innovative specialist in the field of tearing equipment to recycle textile garment clippings. This technology maintains as much as possible the staple length of reopened fibre from yarn in knitted and woven textiles. This special tearing process avoids the downgrading and shortening of the staple.

TechnoPlants is a highly experienced specialist in the field of aerodynamic web forming and through air technology with particular emphasis on reclaimed fibre for various applications as for example in acoustic and thermal insulation, car parts, upholstery and bedding.

With regard to current and imminent requirements to strengthen and promote the recycling of garment waste in order to safe valuable textile fibre in the European but also worldwide textile economy DiloGroup announces the start of a close cooperation between Dilo, Germany and the Italian companies Dell’Orco & Villani and TechnoPlants. This cooperation forms a group of expertise to supply complete projects in the area of textile recycling.

Dell’Orco & Villani is a long term highly experienced and innovative specialist in the field of tearing equipment to recycle textile garment clippings. This technology maintains as much as possible the staple length of reopened fibre from yarn in knitted and woven textiles. This special tearing process avoids the downgrading and shortening of the staple.

TechnoPlants is a highly experienced specialist in the field of aerodynamic web forming and through air technology with particular emphasis on reclaimed fibre for various applications as for example in acoustic and thermal insulation, car parts, upholstery and bedding.

DiloGroup with DiloSystems GmbH is a general contractor who is specialized in the area of fibre preparation, carding, cross-lapping and needling who will act as a turnkey general provider of complete projects including Dell’Orco & Villani components to reclaim wasted fibre as well as TechnoPlants components when aerodynamic web forming is included or when carding, cross-lapping is selected together with through-air ovens and end-of-line equipment including packaging from TechnoPlants.

The expertise of the three companies together is a source for the complete know-how in this large area of applications to reuse fibre from textile waste in new nonwoven material.

With the beginning of upcoming ITMA 23, more details of the organizational structure of this cooperation among the three companies will be released and project engineering will be started.

More information:
Dilo DiloGroup textile recycling
Source:

Oskar Dilo Maschinenfabrik KG

comfortemp® nature Lyocell HO 60x Bild Freudenberg
comfortemp® nature Lyocell HO 60x
16.11.2022

Freudenberg presents sustainable product innovations at ISPO 2022

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

The independent jury has nominated the 100 percent biodegradable thermal insulation comfortemp® nature Lyocell HO 60x, made from Lyocell regenerated fibers, for the Textrends Award fall/winter 2024/25 season. The award is given exclusively to innovative products that are groundbreaking for the development of the textile industry. comfortemp® nature Lyocell HO 60x has a variety of extraordinary performance characteristics as a high warmth retention, bacteria inhibiting and fast drying, furthermore water repellent. High wearing comfort and the assurance of a perfect moisture balance characterize the volume fleece as ideal for the application in sportswear.

Freudenberg is presenting its entire European and global product portfolio from its "House of Sustainability" at ISPO. The "House of Sustainability" supports Freudenberg in minimizing its ecological footprint and maximizing its ecological handprint. For this purpose, the company's own manufacturing processes are designed to minimize the impact on the environment. In addition, products are developed to help customers produce more sustainably.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Photo: Freudenberg
28.10.2022

Freudenberg Performance Materials at Performance Days

  • Presenting Sustainable Apparel Solutions

Freudenberg Performance Materials Apparel (Freudenberg) will be part of the Performance Days from November 03 to 04, 2022 in Munich, Germany. The specialist in woven, knitted, weft and nonwoven interlinings will showcase the latest sustainable products for sportswear, workwear, sportive fashion and athleisure collections.

Freudenberg will showcase its full range of European and global products being part of its House of Sustainability, Active Range and the comfortemp® brand offering high-performance thermal insulation for outdoor and active wear.

  • Presenting Sustainable Apparel Solutions

Freudenberg Performance Materials Apparel (Freudenberg) will be part of the Performance Days from November 03 to 04, 2022 in Munich, Germany. The specialist in woven, knitted, weft and nonwoven interlinings will showcase the latest sustainable products for sportswear, workwear, sportive fashion and athleisure collections.

Freudenberg will showcase its full range of European and global products being part of its House of Sustainability, Active Range and the comfortemp® brand offering high-performance thermal insulation for outdoor and active wear.

Freudenberg Performance Materials Apparel’s House of Sustainability strives to minimize the company’s footprint by reducing the environmental impact of the company’s manufacturing processes to a minimum. At the same time, Freudenberg maximizes its handprint by developing products enabling customers to manufacture more efficiently and sustainably or to consume fewer valuable resources. This initiative is based on seven product pillars with more than 500 sustainable products, among them recycled general interlinings, recyclable, energy-saving or biodegradable materials, sustainable cotton, nature-based solutions and recycled thermal insulations and linings.

Being part of the House of Sustainability, Freudenberg’s Active Range stands for high-performance solutions for stretch active and outdoor active wear including interlinings, tapes, linings, bonding solutions and measuring tools. Most materials of this portfolio are made of at least 70% recycled materials and thus cater to customers’ sustainability goals.

Source:

Freudenberg Performance Materials

10.10.2022

OETI: 55 years of testing, certifying, accreditation and notification

As an accredited testing and certification body, the “OETI - Institut fuer Oekologie, Technik und Innovation GmbH“ (OETI for short) has been successfully responding to prevailing market requirements for 55 years and, in the process, has made a name for itself worldwide. To mark its anniversary, this international centre of excellence with its origins in Austria is taking a look back at the most important milestones in its history as well as providing interesting insights into future developments.

As renowned flooring manufacturers founded the Austrian Carpet Institute on 25th of September 1967, no one could have imagined how successful the company would become. But even back then, one thing was clear to the experts: the need to establish a carpet research and testing centre in the form of an association. Today, over five decades later, OETI is a testing and certification services provider for OEKO-TEX® certificates and labels, textiles, leather, due diligence along the textile and leather supply chain as well as for personal protective equipment (PPE), flooring technology, furnishings and indoor air quality.

As an accredited testing and certification body, the “OETI - Institut fuer Oekologie, Technik und Innovation GmbH“ (OETI for short) has been successfully responding to prevailing market requirements for 55 years and, in the process, has made a name for itself worldwide. To mark its anniversary, this international centre of excellence with its origins in Austria is taking a look back at the most important milestones in its history as well as providing interesting insights into future developments.

As renowned flooring manufacturers founded the Austrian Carpet Institute on 25th of September 1967, no one could have imagined how successful the company would become. But even back then, one thing was clear to the experts: the need to establish a carpet research and testing centre in the form of an association. Today, over five decades later, OETI is a testing and certification services provider for OEKO-TEX® certificates and labels, textiles, leather, due diligence along the textile and leather supply chain as well as for personal protective equipment (PPE), flooring technology, furnishings and indoor air quality.

In 1992, OETI was a founding member of the ‘International OEKO-TEX® Association for Research and Testing in the Field of Textile and Leather Ecology’ with independent certifications and product labels. Ever since, OEKO-TEX® has enabled companies along the textile and leather supply chain and every consumer to make responsible decisions for safe, environmentally friendly and fairly manufactured products.

In line with its focus on sustainability, OETI and its Swiss parent company, TESTEX AG, wanted to build the new OETI headquarters using low energy construction techniques and ensure its carbon-neutral operation. To achieve these goals, the highest possible thermal insulation and energy optimisation standards were applied, while the carbon-neutral power supply is generated by its in-house photovoltaics system as well as domestic renewable energy.

The new headquarters, which the company moved into in 2021, provides space for 75 employees over 2,500m2 and boasts bright and perfectly equipped office areas. The laboratory areas, the analytical/chemical laboratory and the physical / fire laboratory were also designed based on the latest methods and technologies. This makes OETI, alongside its Swiss parent company TESTEX, the second fully fledged laboratory site in the entire, global TESTEX Group.

More information:
OETI Testex
Source:

OETI

Photo: ANDRITZ
04.10.2022

ANDRITZ to supply needlepunch equipment to Jasztex, Canada

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

Source:

ANDRITZ AG

Photo: Bogner
11.08.2022

BOGNER Golf Collection Fall/Winter 2022

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

Source:

Willy Bogner GmbH & Co. KGaA

(c) EFI
19.07.2022

EFI™ Reggiani: New textile campus to accommodate ongoing growth

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

Sustainability and employee well-being at the centre
The new facility was designed with environmental sustainability and employee well-being in mind. That focus includes plans to install 400 kilowatts of solar panels supplying 60% of the facility’s total energy requirements. Moreover, the building will benefit from superior thermal insulation that will ensure a reduction in heating and cooling costs. Numerous skylights in the facility will provide better natural lighting and a reduction in artificial lighting usage.
 
Green space on the campus was a priority in the design process, covering an estimated 20% of the total area. For a more welcoming work environment, the campus will also feature a canteen and gymnasium for employee use.
 
A 3,000-square-metre demo centre in the new facility will be nearly twice as large as the current EFI Reggiani demo centre in Grassobbio, Italy, offering a high-end, high-tech showcase for state-of-the-art EFI Reggiani printers, as well as Mezzera pre- and post-treatment and Jaeggli yarn treatment products. The demo centre will also feature EFI Reggiani’s recently acquired portfolio of Inèdit raster image processing (RIP) and workflow software solutions.
 
Transforming the textile industry through innovation in green
Since the launch of its first analogue printer, to its newest digital solutions, EFI Reggiani has at its core a heritage and expertise that have contributed to the transformation of the textile industry worldwide. With its total commitment to providing “Innovation in Green,” EFI Reggiani’s leadership is the result of extensive research targeted at improving productivity, quality and sustainability in its customers’ operations. The company is focused on optimising the textile manufacturing process – and reducing energy use, water consumption and overall environmental impact – to ensure customers’ business growth and profitability.
 
Over the years, EFI Reggiani’s product portfolio has continued to expand, ranging from rotary and flatbed printing machines, to scanning/multi-pass digital printers, to fast digital textile printers.

Source:

EFI

EPTA highlights opportunities for pultruded composites in energy-efficient building (c) EPTA
Arte Charpentier Architectes
06.10.2021

EPTA highlights opportunities for pultruded composites in energy-efficient building

Buildings are responsible for approximately 40% of all energy consumption and 36% of CO2 emissions in the EU. Improving energy efficiency in buildings therefore has a key role to play in achieving the ambitious goal of carbon neutrality by 2050 set out in the European Green Deal. A new briefing from the European Pultrusion Technology Association (EPTA) discusses how composite materials can help improve the thermal performance of the building envelope to satisfy increasingly stringent energy efficiency regulations. The EPTA report, Opportunities for pultruded composites in energy-efficient buildings, explains how pultruded profiles offer durable,  low maintenance solutions which can help reduce both operational and embodied carbon emissions from buildings in applications including energy-saving windows, thermal break connectors, and solar shading and cladding systems.   

Buildings are responsible for approximately 40% of all energy consumption and 36% of CO2 emissions in the EU. Improving energy efficiency in buildings therefore has a key role to play in achieving the ambitious goal of carbon neutrality by 2050 set out in the European Green Deal. A new briefing from the European Pultrusion Technology Association (EPTA) discusses how composite materials can help improve the thermal performance of the building envelope to satisfy increasingly stringent energy efficiency regulations. The EPTA report, Opportunities for pultruded composites in energy-efficient buildings, explains how pultruded profiles offer durable,  low maintenance solutions which can help reduce both operational and embodied carbon emissions from buildings in applications including energy-saving windows, thermal break connectors, and solar shading and cladding systems.   

“Economic and population growth mean energy demand is set to rise, making energy efficiency measures even more critical,“ comments Dr Elmar Witten, Secretary of EPTA. “Regulations and standards will continue to push for lower U-values for building elements, driving the increase use of materials and designs which minimise operational carbon emissions. Pultruded profiles offer an attractive combination of properties for designers of energy-efficient buildings – low thermal conductivity to minimise thermal bridging, together with excellent mechanical performance, durability, and design freedom.“  
 
It is estimated that today, roughly 75% of the EU building stock is energy inefficient, meaning that a large part of the energy used goes to waste. This energy loss can be minimised by improving existing buildings and striving for smart solutions and energy efficient materials for new builds. Areas of focus include improving glazing systems, better insulation of envelope components, and reducing unwanted solar heat gains. The low thermal conductivity of composites is being exploited in components and structures that help to minimise energy required for space conditioning. 

  • Energy-saving windows and doors
  • Thermal break connectors and structural assemblies
  • Solar shading systems
  • Rainscreen cladding and curtain wall facades
  • Building a sustainable future
Freudenberg: Protection and Flexibility for Workwear (c) Freudenberg Performance Materials Holding SE & Co. KG
03.08.2021

Freudenberg: Protection and Flexibility for Workwear

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Active contribution to sustainability
Many products of the Freudenberg Workwear Range consist of a high percentage of recycled polyester coming from post-consumer PET bottles.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

04.12.2020

ANDRITZ to acquire Laroche

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling and decortication of bast fibers. The product portfolio further complements the ANDRITZ Nonwoven product range. ANDRITZ is now able to offer the complete supply and value chain, from the raw material, to opening and blending, web forming, bonding, finishing, drying, and converting. Laroche’s high-performance technologies for opening and blending enhance the ANDRITZ scope of supply for spunlace, needlepunch and wetlaid production lines. Moreover, both companies have agreed to further strengthen the development of their existing technologies for high-speed and high-capacity applications and also to continue pursuing the development of textile recycling processes in order to stay ahead of the changes the industry is facing.

Laroche SA has been developing fiber processing technologies for more than 100 years. With integrated manufacturing, the company supplies lines for a wide range of industries/products: spinning, bedding and furniture, automotive, acoustic and thermal insulation, geotextiles, filtration, wipes, and many more.

Robert Laroche, President of Laroche: “This acquisition is the logical conclusion in view of the successful long-term relationship between ANDRITZ and Laroche. We have been working in close cooperation for more than ten years and are very much looking forward to becoming a member of the ANDRITZ family.”

Andreas Lukas, Senior Vice President and Division Manager, ANDRITZ Nonwoven: “By adding Laroche’s state-of-the-art products and expertise to our existing capabilities, ANDRITZ Nonwoven will further strengthen its market and technology position.”

Source:

ANDRITZ AG

Kooperation AMAC und FINNESTER (c) Finnester
Finnester’s innovative fire protection coatings in action
21.09.2020

Cooperation AMAC and FINNESTER

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

More information:
Finnester Coatings Oy AMAC
Source:

AMAC GmbH

Sample from the development of the nano porous high-temperature thermal insulation material Sample from the development of the nano porous high-temperature thermal insulation material (© ZAE Bayern).
12.08.2020

Consortium develops new generation of thermal insulation for high-temperature furnaces

In the joint project "AeroFurnace" funded by the German Federal Ministry of Economic Affairs and Energy (BMWi), the consortium, consisting of the Bavarian Center for Applied Energy Research e.V. (ZAE Bayern) as joint coordinator, the furnace manufacturer FCT Systeme, and SGL Carbon has succeeded in improving the thermal insulation properties of a new composite material by up to 120 percent compared to commercially available felt-based carbon materials. This enabled the project partners to move into a new quality level of thermal insulation in high-temperature industrial applications and pave the way for more energy efficient thermal insulation.

Dr. Gudrun Reichenauer, coordinator of the joint project and head of the work group Nanomaterials at ZAE Bayern: "In this project, we have been able to make the latest findings from the world of nanomaterials accessible to the market through intensive cooperation and thus set new standards in the field of thermal insulation materials."

In the joint project "AeroFurnace" funded by the German Federal Ministry of Economic Affairs and Energy (BMWi), the consortium, consisting of the Bavarian Center for Applied Energy Research e.V. (ZAE Bayern) as joint coordinator, the furnace manufacturer FCT Systeme, and SGL Carbon has succeeded in improving the thermal insulation properties of a new composite material by up to 120 percent compared to commercially available felt-based carbon materials. This enabled the project partners to move into a new quality level of thermal insulation in high-temperature industrial applications and pave the way for more energy efficient thermal insulation.

Dr. Gudrun Reichenauer, coordinator of the joint project and head of the work group Nanomaterials at ZAE Bayern: "In this project, we have been able to make the latest findings from the world of nanomaterials accessible to the market through intensive cooperation and thus set new standards in the field of thermal insulation materials."

Dr. Thomas Kirschbaum, project manager at SGL Carbon: "In furnace simulations at the partner FCT, we have already been able to demonstrate what the new material can do: Depending on the temperature program, up to 40 percent of the required process energy can be saved with the new thermal insulation material. The potential of the new material is great." This prediction will be reviewed under real conditions in a demonstrator component in the second half of 2020 as part of the still ongoing BMWi project.

Dr. Jürgen Hennicke, project lead and head of R&D at FCT Systeme: "As a leading manufacturer of industrial vacuum or inert gas high temperature furnaces, the new generation of insulating materials enables us to create furnaces with a more favorable ratio of usable space to external dimensions, thus offering customers improved cost efficiency and productivity".

Based on laboratory samples in plate form it has already been demonstrated that the production of the new material can be represented by technically simple processes and is in principle well scalable. However, there is still a long way to go before the product is ready for serial production.

The third largest share of final energy in Germany is used for the generation of heat in industrial processes (22.6 percent). In many industries, e.g. in the steel and ceramics industry, energy-intensive high-temperature processes run above 1000°C – these alone require almost 50 percent of the industrial process heat. Suitable thermal insulation materials can significantly reduce energy demand while maintaining the same usable volume.

Source:

SGL CARBON SE