From the Sector

Reset
384 results
25.03.2024

Texhibition Istanbul: Fifth edition successfully concluded

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

In addition to well-known companies such as Almodo, Bahariye, BTD, Can Textile, Iskur, Kipaş, Menderes, Söktaş, Yünsa, Zorlu, İpeker a large number of other export-oriented companies from the segments of textiles (woven fabrics, knitting) presented their latest designs and products.

Visitors
25,752 visitors came from over 112 countries, 41.8% from the European Union (including Germany, Italy, the Netherlands, Spain, Romania etc.) and Great Britain, Ukraine,26.5% from Asia (including Russia etc.), 14.8% from the Middle East (including Jordan, United Arab Emirates, Saudi Arabia) 10.7% from North Africa (including Algeria, Tunisia etc.), 3.1% from North America (United States, Canada), 3.1% from South America and other countries.

American buyers from the USA and Canada in particular, but also a large number of Mexican and Colombian buyers took advantage of the numerous match-making opportunities at Texhibition. Many B2B meetings took place and led to numerous orders being placed, including from key accounts such as Alexander Wang, Asos, Forever 21, Sainsbury's, Veronica Beard etc.

More information:
Texhibition Istanbul Yarns Denim
Source:

JANDALI

25.03.2024

NCTO: USTR seeks Input on Domestic Supply Chain Resilience Policy

Glen Raven hosted United States Trade Representative (USTR) Ambassador Katherine Tai in an important visit to the company’s yarn spinning manufacturing facility and headquarters for its Sunbrella® flagship brand in Burlington, N.C. followed by an industry supply chain roundtable.

Ambassador Tai’s visit coincides with USTR’s Federal Register notice for public input to inform the administration’s development of trade and investment policy initiatives related to a domestic supply chain resilience plan.

USTR has highlighted domestic textiles as a critical part of the supply chain. The textile sector, which includes yarns, fabrics, apparel and other finished goods, will be part of its fact-finding investigation into shaping policy tools that could be deployed to enhance supply chain resilience. The office is requesting input on policies that are currently working well for these sectors, and those that are not working well, in advancing domestic supply chains.

Glen Raven hosted United States Trade Representative (USTR) Ambassador Katherine Tai in an important visit to the company’s yarn spinning manufacturing facility and headquarters for its Sunbrella® flagship brand in Burlington, N.C. followed by an industry supply chain roundtable.

Ambassador Tai’s visit coincides with USTR’s Federal Register notice for public input to inform the administration’s development of trade and investment policy initiatives related to a domestic supply chain resilience plan.

USTR has highlighted domestic textiles as a critical part of the supply chain. The textile sector, which includes yarns, fabrics, apparel and other finished goods, will be part of its fact-finding investigation into shaping policy tools that could be deployed to enhance supply chain resilience. The office is requesting input on policies that are currently working well for these sectors, and those that are not working well, in advancing domestic supply chains.

The Ambassador’s visit to Glen Raven included a tour of the Sunbrella facilities, a design and innovation center, and a roundtable discussion with several other textile executives based in North Carolina who highlighted the significant impact of the sector to the U.S. economy.

Glen Raven, a family-owned company founded in 1880, operates five manufacturing facilities in North and South Carolina employing 2,500 people, including their joint venture with Shawmut Corporation. The company is currently in the process of scaling a $250 million multi-phase U.S. capacity expansion plan of its facilities and infrastructure to meet customer demand.

 

Source:

National Council of Textile Organizations

slide needle Photo: Groz-Beckert
19.03.2024

Groz-Beckert/ Vanguard Pailung: Innovative slider needle for circular knitting machines

Groz-Beckert offers interested machine builders various cooperation opportunities to jointly develop new products or improve existing ones. In collaboration with Vanguard Pailung, a manufacturer of ultra-high-speed knitting machines for body-size products, Groz-Beckert has developed an innovative slider needle for a new generation of machines. Groz-Beckert's Technology and Development Center (TEZ) provides the appropriate framework for so-called co-development projects.

In June 2022, Vanguard Pailung approached Groz-Beckert with a cooperation request. Together with Groz-Beckert, the company wanted to develop a new needle solution for an innovative ultra-high-speed machine. Together with an innovative slide needle, the new machine was to exceed the speed and productivity of known knitting systems of large circular knitting machines.

Machine and needle development ran in parallel and were closely coordinated. The first field tests took place in the Vanguard Pailung laboratory in Monroe/NC, USA in February 2023. The successful development was presented to a wide audience for the first time at ITMA 2023 in June.

Groz-Beckert offers interested machine builders various cooperation opportunities to jointly develop new products or improve existing ones. In collaboration with Vanguard Pailung, a manufacturer of ultra-high-speed knitting machines for body-size products, Groz-Beckert has developed an innovative slider needle for a new generation of machines. Groz-Beckert's Technology and Development Center (TEZ) provides the appropriate framework for so-called co-development projects.

In June 2022, Vanguard Pailung approached Groz-Beckert with a cooperation request. Together with Groz-Beckert, the company wanted to develop a new needle solution for an innovative ultra-high-speed machine. Together with an innovative slide needle, the new machine was to exceed the speed and productivity of known knitting systems of large circular knitting machines.

Machine and needle development ran in parallel and were closely coordinated. The first field tests took place in the Vanguard Pailung laboratory in Monroe/NC, USA in February 2023. The successful development was presented to a wide audience for the first time at ITMA 2023 in June.

Unlike latch needles, slide needles do not form the stitch via a needle latch, but via a slide that is controlled by its own channel. The advantage of this is that the needle can withstand high speeds, as there is no latch impact, which in turn increases productivity.

The use of the new slide needle in ultra-high-speed machines ensures a particularly high level of process reliability. With the new needle variant, the closer is guided safely and precisely in the groove in the needle shank. At the same time, the base of the needle shank is closed, which ensures maximum stability. The slider needle reliably prevents the so-called latch impact and thus makes a decisive contribution to process reliability. Its use ensures a uniform and speed-independent loop structure, even at maximum speeds.

Source:

Groz-Beckert

18.03.2024

Solvay: Full-year 2023 results

  • Solvay’s FY 2023 financial statements reflect the Partial Demerger completed on December 9, 2023, with the Specialty businesses transferred to Syensqo classified as discontinued operations for 2023.
  • New Solvay leadership team committed to drive the transformation of the company.
  • Net sales for the full year 2023 at €4,880 million were down -12.6% organically versus 2022, driven primarily by volume declines. In Q4, net sales decreased organically by -18.9% from both lower volumes and prices.
  • Underlying EBITDA of €1,246 million for the full year 2023 was stable (+0.2%) on an organic basis compared to a record 2022, with positive Net Pricing and lower fixed costs offsetting the drop in volumes. EBITDA in the fourth quarter was down -24.5% organically vs Q4 2022, fully driven by lower volumes, with variable costs reduction offsetting price erosion, while fixed costs decreased slightly.
  • Underlying net profit from continuing operations was €588 million in 2023 compared to €740 million in 2022.
  • Free Cash Flow of €561 million in 2023 (+17.3% vs.
  • Solvay’s FY 2023 financial statements reflect the Partial Demerger completed on December 9, 2023, with the Specialty businesses transferred to Syensqo classified as discontinued operations for 2023.
  • New Solvay leadership team committed to drive the transformation of the company.
  • Net sales for the full year 2023 at €4,880 million were down -12.6% organically versus 2022, driven primarily by volume declines. In Q4, net sales decreased organically by -18.9% from both lower volumes and prices.
  • Underlying EBITDA of €1,246 million for the full year 2023 was stable (+0.2%) on an organic basis compared to a record 2022, with positive Net Pricing and lower fixed costs offsetting the drop in volumes. EBITDA in the fourth quarter was down -24.5% organically vs Q4 2022, fully driven by lower volumes, with variable costs reduction offsetting price erosion, while fixed costs decreased slightly.
  • Underlying net profit from continuing operations was €588 million in 2023 compared to €740 million in 2022.
  • Free Cash Flow of €561 million in 2023 (+17.3% vs. €479 million in 2022) resulting in a record FCF conversion ratio of 45.4%, thanks to the strong EBITDA performance and to the positive impact from working capital variation.
  • ROCE was 20.4% in 2023, -2.5pp compared to 2022 as a result of lower profit.
  • Solid balance sheet at the end of December 2023, in line with the target capital structure announced in November 2023, with an underlying net debt of €1.5 billion, which translates into a leverage ratio of 1.2x.
  • Total proposed gross dividend of €2.43 per share, subject to shareholders’ approval during the next Ordinary General Meeting of May 28, 2024.
  • Solvay continues to reduce its GHG emissions (-19% vs 2021, scope 1 and 2).
  • 2024 Outlook: Organic growth of the underlying EBITDA of -10% to -20% compared to restated 2023; Free cash flow of minimum €260 million

2024 outlook
Across its product portfolio, Solvay expects current demand levels to continue over the next few months and, as such, expects H1 2024 volumes to be broadly in line with H2 2023. At this point, there is little visibility on the second half of the year, however there are signs that the trend in the second half could improve. Solvay expects Soda Ash prices over FY 2024 to be lower than FY 2023, consistent with the current market environment, which will affect the business margin in 2024. Pricing trends across Solvay’s other businesses are forecasted to be more resilient year on year.

Lower energy and raw materials prices should offset some of the negative pressure on the topline. More importantly, Solvay has started to implement cost savings initiatives that will start to deliver results in 2024.

For full year 2024, Solvay expects an organic growth of the underlying EBITDA by -10% to -20% versus a high comparison base in 2023, especially in H1. This translates into a range of €925 million to €1,040 million at a 1.10 EUR/USD exchange rate.

The organic growth of the underlying EBITDA is calculated from a 2023 restated figure of €1,154 million (vs a reported figure of €1,246 million).

Free cash flow to Solvay shareholders from continuing operations is expected to be greater than €260 million, in line with the cash usage prioritization presented during the Capital Market Day in November 2023. It is supported by Solvay’s ability to manage its capex and working capital to ensure the financing of its businesses and the payment of dividends while keeping the strength of its balance sheet intact.

Solvay remains committed to implement its strategic roadmap and reconfirms its 2028 targets as communicated at the Capital Markets Day of November 2023.

Source:

Solvay

Collaboration between IHKIB and WRAP (c) IHKIB
18.03.2024

Collaboration between IHKIB and WRAP

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

Mr. Selcuk Mehmet Kaya, Chairman of the International Relations and Sustainability Committee of IHKIB, and Mr. Avedis Seferian, President and CEO of WRAP, officially inked a collaboration agreement on March 8, 2024, marking a significant step towards fostering business relations between Türkiye and the USA. The agreement focuses on a pilot project developed by IHKIB and WRAP, aiming to identify leading Turkish apparel companies exporting to the USA and encouraging these facilities to attain WRAP certification. In return, WRAP will provide in-person and virtual training at no charge to guide these facilities through the certification process. The project seeks to strengthen business ties between Türkiye and the USA, creating additional opportunities for mutual cooperation between the parties in both countries.

Source:

IHKIB - Istanbul Apparel Exporters’ Association

15.03.2024

TMAS: Digitised solutions at Techtextil and Texprocess

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Bespoke seams
Svegea will demonstrate its EC 300-XS colarette technology, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

The EC 300-XS collarette cutter on show in Frankfurt is equipped with the latest E-Drive II system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process. An accompanying FA 350 fully automatic roll slitting machine will also be demonstrated.

Digital finishing
At Techtextil meanwhile, Baldwin Technology Co. will provide full details of how its highly digitised TexCoat G4 non-contact spray technology for textile finishing and remoistening not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to customer requirements in terms of single and double-sided finishing applications.

TexCoat G4 can reduce water consumption and chemical usage by as much as 50% compared to traditional padding application processes.

Yarn tension
Celebrating its 60th anniversary this year, Eltex will display the latest Eltex EyETM system for the continuous monitoring of yarn tension on warp beams.

The Eltex EyETM eliminates problems when warping, and also in subsequent weaving or tufting processes, monitoring the yarn tension on all positions in real-time and enabling a minimum and maximum allowable tension value it be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Accumulated know-how
Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

The company will present its latest X4 yarn feeders with integrated accessory displays (TED) as a new standard, as well as launching its own e-commerce platform – iroonline.com.

The TED function enables weft tension settings to be transferred from one machine to another, enabling a fast start-up the next time the same article is woven. The position of the S-Flex Tensioner is constantly monitored by an internal sensor – even if adjustment is made during power off.

X4 feeders are also available with integrated active tension control (ATC-W) as an option. With the ATC-W active tension control, the required tension is easily set and monitored on the integrated display. Once set, the system constantly regulates itself, ensuring consistent yarn tension during the weaving process which is constantly and accurately measured by the ATC sensor unit, sending a signal to the ATC operator unit resulting in consistently stable yarn tension at the required level.

Source:

TMAS - Swedish textile machinery association

13.03.2024

IDEA®25: Call for abstracts

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

  • Natural Fibers (Cotton, Hemp, Bamboo, Banana, Wood Pulp, Regenerated Cellulose, Wool, Fur, Chitin, Feathers)
  • Polymers (Biopolymers, Regenerated and Recycled polymers, Unconventional and Alternatives to Traditional Polymers)
  • Sustainable Chemistries (finishes, lubricants, adhesives, and additives)

INNOVATIONS IN SUSTAINABILITY

  • Process Improvements with Sustainability Impact (reduced waste, reduced energy, reduced water consumption)
  • Product Design Improvements with Sustainability Impact (lightweighting, designs for end-of-life, “good enough” design)

END-OF-LIFE SOLUTIONS

  • End-of-Life or Next-Life Considerations (compostability, biodegradability, recycling, advanced recycling and circularity)
  • Presenting is an opportunity for technical professionals to showcase pioneering research, innovative solutions, and expert insights with technology scouts.

Abstracts must be submitted via the INDA website by June 7, 2024.

Source:

INDA - Association of the Nonwoven Fabrics Industry

Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

Launch of GarmentTech İstanbul Exhibition (c) Teknik Fuarcılık
At the GarmentTech İstanbul Exhibition press conference; Teknik Fairs organization team, members of the Garment Machinery Advisory Board, KOMİD President, TEMSAD President and sector representatives.
11.03.2024

Launch of GarmentTech İstanbul Exhibition

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

Source:

Teknik Fuarcılık

08.03.2024

Final report of the World Pultrusion Conference 2024

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The conference takes place every two years in a European country of importance to the pultrusion industry and is organised by AVK for the European Pultrusion Technology Association (EPTA), in cooperation with the American Composites Manufacturers Association (ACMA).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V / The European Pultrusion Technology Association (EPTA)

5th Edititon of Texhibition Istanbul Fabric and Textile Accessories Fair (c) Texhibition Istanbul
05.03.2024

5th Edititon of Texhibition Istanbul Fabric and Textile Accessories Fair

Texhibition Istanbul Fabric and Textile Accessories Fair, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), is ready for its fifth edition. From 6 to 8 March 2024, 558 exhibitors will present themselves to the 30,000 expected visitors from over 100 countries, including the European Union, Great Britain, the USA, North Africa and the Middle East. With this edition, Texhibition has more than doubled the space compared to the last event to 35,000 square metres.

The fifth edition of Texhibition Istanbul offers a comprehensive overview of all product groups in the textile prepress sector: from woven fabrics to knitwear, from denim to artificial leather and textile accessories

Texhibition Istanbul Fabric and Textile Accessories Fair, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), is ready for its fifth edition. From 6 to 8 March 2024, 558 exhibitors will present themselves to the 30,000 expected visitors from over 100 countries, including the European Union, Great Britain, the USA, North Africa and the Middle East. With this edition, Texhibition has more than doubled the space compared to the last event to 35,000 square metres.

The fifth edition of Texhibition Istanbul offers a comprehensive overview of all product groups in the textile prepress sector: from woven fabrics to knitwear, from denim to artificial leather and textile accessories

Due to popular demand, the fair has been expanded to five halls, including the new Yarn Hall (Hall 8) with exhibitors such as Sasa, Aksa, Karafiber, Kortex, Tepar, Ensar, Kaplanlar and Iskur and the BlueBlack Denim Hall (Hall 7), which showcases the latest denim trends and presents a wide range from blue shades to black denims with exhibitors such as İsko, Çalık Bossa, Kipas and İskur. BlueBlack Denim is designed by the  designer Idil Tarzi in cooperation with the creative directors Gönül Altunisik and Selvi Yigci.

Curated by Idil Tarzi and her creative team, the Texhibition Trend Area in Halls 4 and 5 presents the latest colour trends, materials and accessories.

Under the direction of designers Arzu Kaprol and Filiz Tunca, the Innovation Hub showcases technological innovations that add value to textile production: from fibre to yarn, from fabrics to clothing.

Digital art installations in the entrance area, which run through the entire trade fair, as well as piano performances in the foyer await visitors at the upcoming Texhibition.

Seminars and workshops with industry experts shed light on current topics in the industry, including innovations, production processes and design developments. These opportunities offer participants a platform to exchange knowledge and discuss the latest developments in the textile industry.

Borealis celebrates 30th anniversary (c) Borealis
05.03.2024

Borealis celebrates 30th anniversary

Borealis is commemorating its thirtieth year of operations. Born of a merger between Statoil and Neste, Borealis has expanded from its early Nordic roots to become one of the top polyolefins players. Its dedication to value creation through innovation has produced proprietary and transformative technologies which benefit society and accelerate the transition to a circular economy. The company is regularly ranked as Austria's top innovator in the European Patent Index and holds an extensive patent portfolio of around 8,900 granted patents. In Europe in particular, Borealis has for decades bolstered the industrial landscape by investing in its capital assets, and by providing thousands of jobs.

Borealis is commemorating its thirtieth year of operations. Born of a merger between Statoil and Neste, Borealis has expanded from its early Nordic roots to become one of the top polyolefins players. Its dedication to value creation through innovation has produced proprietary and transformative technologies which benefit society and accelerate the transition to a circular economy. The company is regularly ranked as Austria's top innovator in the European Patent Index and holds an extensive patent portfolio of around 8,900 granted patents. In Europe in particular, Borealis has for decades bolstered the industrial landscape by investing in its capital assets, and by providing thousands of jobs.

Innovations
Borealis uses technological innovation to add value to polyolefin-based applications, ensure that production processes are made more resource efficient, and to accelerate plastics circularity. Borstar®, the multi-modal proprietary technology for the manufacture of polyethylene (PE) and polypropylene (PP), has been a mainstay of Borealis success since the start-up of the first Borstar PE plant in Porvoo, Finland in 1995. Borstar has since been joined by other technology brands, like Borlink™, an innovation for the power cable industry; Borstar® Nextension Technology, an innovation that among other benefits facilitates the production of monomaterial applications designed for recycling; or the Borcycle™ M technology for mechanical recycling, which breathes new life into polyolefin-based, post-consumer waste, transforming it into applications with a lower carbon footprint.

Global Expansion
With the strong support of its two majority shareholders OMV (Austria) and The Abu Dhabi National Oil Company (ADNOC, UAE), Borealis continues to expand its global footprint. The joint venture Borouge, established in 1998 in the UAE, and listed on the Abu Dhabi Securities Exchange (ADX) since 2022, is one of the largest integrated polyolefin complexes. It is currently the site of the company’s largest-ever growth project: Borouge 4, the new USD 6.2 billion facility in Ruwais, which will serve customers in the Middle East and Asia. In North America, the Baystar™ joint venture, founded in 2017 and operated with partner TotalEnergies, entailed the construction of a new ethane cracker as well as the most advanced Borstar plant ever built outside of Europe. The PE Borstar 3G plant in Pasadena, Texas was started up in late 2023 and has brought Borstar to this continent for the first time. Borealis’ commitment to Europe as a production location is evidenced by the new, world-scale propane dehydrogenation (PDH) plant currently under construction at Borealis operations in Kallo, Belgium.

More information:
Borealis polyolefins Recycling
Source:

Borealis

Eastman and Patagonia join forces to address textile waste (c) Eastman
28.02.2024

Textile waste: Eastman and Patagonia join forces

Eastman announces a partnership with Patagonia to address textile waste.

The outdoor apparel company teamed up with Eastman to recycle 8,000 pounds of pre- and post-consumer clothing waste, which Eastman processed through its molecular recycling technology. The process involves breaking down Patagonia’s unusable apparel into molecular building blocks that Eastman can use to make new fibers.

"We know apparel waste is a major problem, and consumers increasingly want better, more sustainable solutions when their most loved clothing reaches the end of its life," said Natalie Banakis, materials innovation engineer for Patagonia.

"Our collaborations show the world what’s possible when it comes to sustainability,” said Carolina Sister Cohn, global marketing lead for Eastman textiles. “We have the technology to make the textiles industry circular, and we know it requires collaboration with innovative brands to make circular fashion possible. This is only the beginning, and we look forward to more collaborations throughout 2024."

Eastman announces a partnership with Patagonia to address textile waste.

The outdoor apparel company teamed up with Eastman to recycle 8,000 pounds of pre- and post-consumer clothing waste, which Eastman processed through its molecular recycling technology. The process involves breaking down Patagonia’s unusable apparel into molecular building blocks that Eastman can use to make new fibers.

"We know apparel waste is a major problem, and consumers increasingly want better, more sustainable solutions when their most loved clothing reaches the end of its life," said Natalie Banakis, materials innovation engineer for Patagonia.

"Our collaborations show the world what’s possible when it comes to sustainability,” said Carolina Sister Cohn, global marketing lead for Eastman textiles. “We have the technology to make the textiles industry circular, and we know it requires collaboration with innovative brands to make circular fashion possible. This is only the beginning, and we look forward to more collaborations throughout 2024."

5. edition of Istanbul Fashion Connection with record visitor number (c) IFCO, ITKIB Fairs
23.02.2024

5. Edition of Istanbul Fashion Connection with record visitor number

The fifth edition of IFCO Istanbul Fashion Connection took place from 7 to 10 February 2024 with a record 38,545 visitors. At IFCO, 545 exhibitors met international trade visitors from 159 countries such as Australia, Canada, Colombia, France, Germany, Kenya, Malaysia, Mexico, Nigeria, Philippines, Saudi Arabia, South Africa, South Korea, Spain, Thailand, UK, USA, United Arab Emirates in a total of 8 halls at the Istanbul Expo Centre. The largest group of foreign visitors came from the Middle East (33.4%), Europe (24%), Asia (23.3%) and North Africa (13.3%). A total of 6% of visitors came from the USA, South America, Australia and Africa.

Divided into clear exhibition areas on a total of 100,000 square metres of exhibition space, brands and manufacturers presented the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and wedding wear, lingerie, hosiery, leather and furs.

The next IFCO is planned for 7-9 August 2024.

The fifth edition of IFCO Istanbul Fashion Connection took place from 7 to 10 February 2024 with a record 38,545 visitors. At IFCO, 545 exhibitors met international trade visitors from 159 countries such as Australia, Canada, Colombia, France, Germany, Kenya, Malaysia, Mexico, Nigeria, Philippines, Saudi Arabia, South Africa, South Korea, Spain, Thailand, UK, USA, United Arab Emirates in a total of 8 halls at the Istanbul Expo Centre. The largest group of foreign visitors came from the Middle East (33.4%), Europe (24%), Asia (23.3%) and North Africa (13.3%). A total of 6% of visitors came from the USA, South America, Australia and Africa.

Divided into clear exhibition areas on a total of 100,000 square metres of exhibition space, brands and manufacturers presented the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and wedding wear, lingerie, hosiery, leather and furs.

The next IFCO is planned for 7-9 August 2024.

Source:

Jandali

23.02.2024

RISE® 2024: Call for Presentations and Award Nominations

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for presentations and award nominations for the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference. RISE will be held October 1-2, 2024, at the James B. Hunt, Jr. Library, North Carolina State University, Raleigh, North Carolina. RISE is a two-day conference presenting new research and science that drives innovation and product development. The theme for this year’s event is “The Other Sustainability Story: Extended Use and Reduced Consumption.”

Nonwoven professionals are encouraged to submit their technical abstracts by Friday, April 12, 2024. Topics being considered are raw materials, equipment and processing, product-related technologies, and applications.  Abstracts may be submitted via the RISE website. For questions about abstract submissions, contact Deanna Lovell.

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for presentations and award nominations for the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference. RISE will be held October 1-2, 2024, at the James B. Hunt, Jr. Library, North Carolina State University, Raleigh, North Carolina. RISE is a two-day conference presenting new research and science that drives innovation and product development. The theme for this year’s event is “The Other Sustainability Story: Extended Use and Reduced Consumption.”

Nonwoven professionals are encouraged to submit their technical abstracts by Friday, April 12, 2024. Topics being considered are raw materials, equipment and processing, product-related technologies, and applications.  Abstracts may be submitted via the RISE website. For questions about abstract submissions, contact Deanna Lovell.

RISE® Innovation Award
In addition, INDA is requesting nominations for innovative nonwoven products and technologies for the RISE® Innovation Award. INDA will consider categories such as raw materials, roll goods, converting, packaging, active ingredients, binders, additives and end products for nominations. This Award recognizes innovation in areas within and on the periphery of the nonwovens industry, utilizing advanced science and engineering principles to develop solutions to problems and advance the usage of nonwovens.

Three finalists will be chosen to present their innovations to technology scouts, scientists, researchers, and industry professionals on Tuesday, October 1st. Nominations may be submitted via the INDA website. The Award submission deadline is July 29, 2024. For questions about the Award, contact Vickie Smead.

Last year, the RISE® Innovation Award was presented to TiHive for their SAPMonit technology.

Source:

INDA, the Association of the Nonwoven Fabrics Industry

60th anniversary of Eltex of Sweden AB (c) Eltex of Sweden
21.02.2024

60th anniversary of Eltex of Sweden AB

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

By 1968 the company was operating from a modern 3,000-square-metre plant and beginning to establish a global presence, introducing the first all-in-one printed circuit board (PCB) for its sensor systems in 1971. As exports increased, further Eltex operations were established in the USA and Ireland and the company expanded its product range including energy control devices, temperature and humidity loggers, food handling safety systems, and military grade battery chargers. Further textile milestones in parallel to advances in weaving technology included optical arrival detectors for air-jet weaving machines at the beginning of the 1980s, and the QTV system for warp preparation, which introduced digital stop-motion control to the industry at the start of the 1990s. In 2009, the company branched out into carpet tufting, first with the CoTS clamp-on tube sensor for tufting machines, followed by the Compact sensor for tufting machines in 2013. In 2019 the Compact II further cemented the company’s position in this sector.

Newly developed Eltex EyETM and ACT-R
Most recently, Eltex has launched the Eltex EyETM system for the monitoring of yarn tension on warp beams. Not only does it eliminate problems when warping, but also in the subsequent weaving or tufting processes. Eltex EyETM monitors the yarn tension on all positions in real-time and a minimum and maximum allowable tension value can be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Eltex has been owned by Brian Hicks, Seamus O’Dwyer and Jonathan Bell since 2007, following a management buy-out and the subsequent formation of Eltex Global Holdings in Ireland. Today, its head office, Eltex of Sweden AB, is in Osby, Sweden where it provides research and development, administration and global sales for the group. Eltex Manufacturing in Ireland is now the group’s primary production facility and Eltex US, Inc. provides sales and service for North America.

Source:

Eltex of Sweden

(c) Swiss Textile Machinery Swissmem
16.02.2024

Recycled fibres: Swiss manufacturers for circularity

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Source:

Swiss Textile Machinery Swissmem

adidas: Partnership with Boys & Girls Clubs (c) adidas
14.02.2024

adidas: Partnership with Boys & Girls Clubs of America

Building upon an existing three-year relationship with Boys & Girls Clubs of America, adidas announced a formal two-year agreement with the nation's largest youth development organization as part of both parties’ efforts to spread the joy of sport to kids and teens in all communities across the nation. By coming together to help drive substantive, long-lasting impact, the partnership will serve as a reminder that through sport, we have the power to change lives.

Over the course of the two-year partnership, adidas will grant $1 million to Boys & Girls Clubs of America to allocate across Clubs representing majority under-resourced Black and Latinx communities in more than a dozen U.S. cities, including New York, Los Angeles and Atlanta. Participating Clubs will receive funding to provide kids and teens with sport, wellness, education and e-sports programming.

Building upon an existing three-year relationship with Boys & Girls Clubs of America, adidas announced a formal two-year agreement with the nation's largest youth development organization as part of both parties’ efforts to spread the joy of sport to kids and teens in all communities across the nation. By coming together to help drive substantive, long-lasting impact, the partnership will serve as a reminder that through sport, we have the power to change lives.

Over the course of the two-year partnership, adidas will grant $1 million to Boys & Girls Clubs of America to allocate across Clubs representing majority under-resourced Black and Latinx communities in more than a dozen U.S. cities, including New York, Los Angeles and Atlanta. Participating Clubs will receive funding to provide kids and teens with sport, wellness, education and e-sports programming.

adidas will also contribute additional funds to Boys & Girls Clubs of America through optional round-up donations from consumers at adidas locations throughout the U.S. Through these round-up efforts over the course of the last three years, adidas has generated nearly $2 million in funding for Boys & Girls Clubs of America and expects this route to unlock additional possibilities for young people across the country.

adidas’ support for Boys & Girls Clubs of America is part of the brand’s promise to invest $120 million to empower Black and Latinx communities in the U.S. through 2025. Other investments under the Creating Lasting Change Now effort include Cultivate & B.L.O.O.M., now titled, adidas Community LAB, an accelerator program for social entrepreneurs of color, and sustained funding for S.E.E.D. (School for Experiential Education in Design), a strategic pipeline to welcome diverse talent into the brand and the design industry.

More information:
adidas adidas AG Sportswear USA
Source:

adidas AG

05.02.2024

Launch of ERCA Textile Chemical Solutions

In January 2024, ERCA Textile Chemical Solutions TCS was launched as an independent entity within the ERCA Group.

The decision to make ERCA TCS a separate company stems from the desire to focus exclusively on solutions for the textile industry and to build an agile entity oriented towards responsible research and production, while continuing to leverage a solid productive and financial background from ERCA S.p.A.

ERCA TCS aims to be the unique and innovative point of reference for textile companies in terms of products and services specifically designed for the needs of a sector that is currently facing challenges and opportunities related to sustainability and responsible production.

In January 2024, ERCA Textile Chemical Solutions TCS was launched as an independent entity within the ERCA Group.

The decision to make ERCA TCS a separate company stems from the desire to focus exclusively on solutions for the textile industry and to build an agile entity oriented towards responsible research and production, while continuing to leverage a solid productive and financial background from ERCA S.p.A.

ERCA TCS aims to be the unique and innovative point of reference for textile companies in terms of products and services specifically designed for the needs of a sector that is currently facing challenges and opportunities related to sustainability and responsible production.

ERCA TCS bases its activity on the principles of "green chemistry" to offer the textile industry chemical solutions that make concrete the concepts of safety, performance, and circularity. Its flagship product - REVECOL® - is born from critical waste materials (used vegetable oils) and present in abundance, which through a process attentive to environmental compatibility and safety, are transformed into a line of innovative, certified, high-performance chemical auxiliaries usable by the entire textile industry.

ERCA Group has six plants in three macro-regions: Europe, Latin America, and Asia and produces chemical specialties and auxiliaries with an approach of responsible innovation. Its production covers several markets: textile, cosmetics, polyurethanes, concrete. It has a turnover of 150 million euros and employs 350 people worldwide, 100 of whom are in the sole Grassobbio plant.

Source:

ERCA Textile Chemical Solutions (ERCA Group)

IHKIB: Green Transformation Journey of the Turkish Apparel Industry (c) Istanbul Apparel Exporters' Association (IHKIB)
TIM and IHKIB President Mustafa Gültepe
05.02.2024

IHKIB: Green Transformation Journey of the Turkish Apparel Industry

The fashion industry, which has strategic importance for the Turkish economy with its value-added production, employment, and exports, came together with representatives of global brands and Laison offices at the 'Green transformation' summit. At the meeting hosted by the Istanbul Apparel Exporters' Association (IHKIB), the studies carried out in the process of adaptation to the Green Deal were put under the spotlight, and the expectations of the Turkish fashion industry from the stakeholders were also expressed.

The opening of the meeting, attended by representatives of relevant ministries and foreign representations, national and international fund providers, as well as brands and buying groups were brought together, was made by Türkiye Exporters Assembly (TIM) and IHKIB President Mustafa Gültepe. In his speech, Gültepe underlined Türkiye's importance in the global apparel industry, by realizing approximately 3.5 percent of world apparel exports. Gültepe continued as follows:

The fashion industry, which has strategic importance for the Turkish economy with its value-added production, employment, and exports, came together with representatives of global brands and Laison offices at the 'Green transformation' summit. At the meeting hosted by the Istanbul Apparel Exporters' Association (IHKIB), the studies carried out in the process of adaptation to the Green Deal were put under the spotlight, and the expectations of the Turkish fashion industry from the stakeholders were also expressed.

The opening of the meeting, attended by representatives of relevant ministries and foreign representations, national and international fund providers, as well as brands and buying groups were brought together, was made by Türkiye Exporters Assembly (TIM) and IHKIB President Mustafa Gültepe. In his speech, Gültepe underlined Türkiye's importance in the global apparel industry, by realizing approximately 3.5 percent of world apparel exports. Gültepe continued as follows:

"As IHKIB, we aim to increase our current annual exports, which are around $20 billion, to $40 billion. The road to the goal goes through Europe and America because the European Union is our largest market in apparel. We export 60 percent of our total apparel exports to EU countries. When we add other European countries and the USA, the ratio approaches 75 percent. While working on alternatives for the $40 billion in exports, we need to focus more on the European and U.S. markets because, as the data shows, the path to $40 billion in apparel exports goes through Europe and the U.S. We already have long-standing collaborations with brands centered in Europe and America. With our knowledge, speed, production quality, design power, and geographical proximity to Europe, we distinguish ourselves from competitors. We took a very important step in the transformation process exactly one year ago. We shared our action plan, which is a road map for our fashion industry's compliance with the Green Deal, with the public on January 30, 2023."

After Mustafa Gültepe's opening speech, Euratex Director General Dirk Vantyghem, Deputy Director General of the Ministry of Trade Bahar Güçlü, and Deputy Secretary General of ITKIB Özlem Güneş made presentations regarding the ongoing efforts in the Green Deal process.

Dirk Vantyghem discussed the sustainability strategy of the textile and apparel industry and the expectations from the EU administration, while Bahar Güçlü provided information about the reflections of legal regulations related to the Green Deal on Türkiye.

Deputy Secretary General of ITKIB Özlem Güneş emphasized the significant opportunity that the Green Deal represents for the Turkish apparel industry, providing comprehensive insights into the efforts conducted by IHKIB regarding the Green Deal adaptation process.

Source:

Istanbul Apparel Exporters' Association (IHKIB)