From the Sector

Reset
14 results
Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right. Source: ITMF
Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right.
01.12.2023

Faster and cheaper carbon fibre production with CarboScreen

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Both types of damage cannot be optimally detected by current means or only become apparent after production, to name just two examples. This leads to higher production costs. In an emergency, faulty production can even lead to plant fires. For this reason, and to ensure good production quality, the system is run at 15 m/min below its production capacity for safety reasons. However, 30 m/min or more would be possible. With the sensor-based online monitoring of CarboScreen, the production capacity can be doubled to 30 /min. This would lead to higher production, resulting in lower manufacturing costs and wider use of carbon fibres in mass markets such as automotive, aerospace and wind energy.

More information:
carbon fibers sensors Startup
Source:

ITA – Institut für Textiltechnik of RWTH Aachen University
 

27.10.2022

The curtain lifts on JEC World 2023

Well-known as the “Festival of composites” each year in Paris, JEC World is the event dedicated to composite materials, their manufacturing technologies and application markets. It will take place in Paris Nord Villepinte from April 25th to 27th, 2023, giving once again the opportunity for professionals to meet with the worldwide composites industry.

Six months prior to the show, the program of the 2023 edition starts to unveil.

For 2023, JEC World is preparing a wide program of conferences and expert panels discussions focusing largely on sustainability and key challenges of our industry and application sectors. In aerospace, construction, ground transportation, health, design, energy (…): sustainable initiatives and greener mindsets are taking over the latest developments in high-performance composite technologies and applications.

Well-known as the “Festival of composites” each year in Paris, JEC World is the event dedicated to composite materials, their manufacturing technologies and application markets. It will take place in Paris Nord Villepinte from April 25th to 27th, 2023, giving once again the opportunity for professionals to meet with the worldwide composites industry.

Six months prior to the show, the program of the 2023 edition starts to unveil.

For 2023, JEC World is preparing a wide program of conferences and expert panels discussions focusing largely on sustainability and key challenges of our industry and application sectors. In aerospace, construction, ground transportation, health, design, energy (…): sustainable initiatives and greener mindsets are taking over the latest developments in high-performance composite technologies and applications.

The JEC Composites Innovation Awards
For 25 years, through the JEC Composites Innovation Awards, JEC Group has rewarded cutting-edge, creative projects which demonstrate the full potential of composite materials. Highly recognised worldwide, they offer the winners and their partners international recognition, a greater exposure during the JEC World show and throughout the following year, new business opportunities as well as an enhanced customer trust.
All companies, R&D centres and their partners can apply before December 16th, and the winners will be revealed during the ceremony, on March 2nd in Paris.

The JEC Composites Startup Booster, the leading startup competition in the world of composites and advanced materials comes back for a sixth edition. All entrepreneurs, SMEs, startups and academic spinoffs building innovative composites projects who want to get international visibility and grow their business with key players of the composites industry & OEMs are already signing up.

Following the call for entries (deadline January 15th, 2023), 20 startups will be selected by JEC Group and its partners Airbus and Mercedes-Benz. Out of the 20 finalists, 3 winners will be selected during the pitching sessions of the show: one in the “Materials & Products” category, one in the “Process, Manufacturing & Equipment” category and a special “Sustainability” award.

More information:
JEC World Composites Startup Award
Source:

JEC Group

18.05.2022

Hexcel at JEC World 2022

  • Hexcel Composite Innovations for Aerospace Applications on Display at JEC World 2022: Hall 5, Stand J41

In late 2021, Hexcel announced an agreement with Fairmat, a deep technology startup, to build the capability to recycle carbon fiber prepreg from Hexcel European operations for reuse in composite panels sold into commercial markets, giving a second life to recovered carbon fiber. To do so, Fairmat has developed a virtuous recycling process, and a sample of its newly recycled material will be available to view at JEC World 2022. Hexcel will present an array of product innovations for aerospace and urban air mobility customer applications during JEC World 2022 in Paris on May3-5. These latest innovations demonstrate the company’s leadership in developing advanced composites technology for the aerospace market.

  • Hexcel Composite Innovations for Aerospace Applications on Display at JEC World 2022: Hall 5, Stand J41

In late 2021, Hexcel announced an agreement with Fairmat, a deep technology startup, to build the capability to recycle carbon fiber prepreg from Hexcel European operations for reuse in composite panels sold into commercial markets, giving a second life to recovered carbon fiber. To do so, Fairmat has developed a virtuous recycling process, and a sample of its newly recycled material will be available to view at JEC World 2022. Hexcel will present an array of product innovations for aerospace and urban air mobility customer applications during JEC World 2022 in Paris on May3-5. These latest innovations demonstrate the company’s leadership in developing advanced composites technology for the aerospace market.

  • Sustainability Focus on Recycling and Reuse
  • HiTape® and HiMax® Reinforcements for OoA Processing
  • Innovative HiFlow™ Resins for Continuous and Shorter Cycle Injection Processes
  • HexPly® Prepregs for Primary Structure and Engine Applications
  • HexTow® High Modulus Fibers HM63 and HM54
  • Thermoplastics and Processing Innovations for Primary and Secondary Structures
  • Lightweight PrimeTex® Reinforcements Solutions for Urban Air Mobility (UAM)
Cobra
05.04.2022

COBRA to Sponsor and Manufacture JEC Trophies

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

The 2022 trophies are designed and produced by Cobra’s Design and Development department - the in house team that supports Cobra’s mass production operations with specialist expertise in product design, industrial design & prototyping. The sweeping curves of the trophies are influenced by perfume bottles, linking back to JEC’s French cultural heritage.  The design also combines a pallet of different materials to symbolise the JEC Group’s complete coverage of the composites sector. Acrylic, upcycled teak production waste from the furniture industry, Innegra™, flax, carbon, and aramid materials have been combined with Sicomin’s GreenPoxy 33 bio-resin to reference the award programme’s combined focus on innovation and sustainability.

The JEC Composites Innovation Awards are presented annually, recognising, and rewarding the most cutting-edge and ingenious projects that exploit the full potential of composite materials. Over the last 20 years, the JEC Composites Innovation and Startup programs have celebrated both innovation and partnership. The JEC Group will announce the winners for the 2022 JEC Composites Innovation awards on April 26th in Paris and in live streaming, and the Start-up Booster winners on May 3rd at JEC World.

“Cobra is delighted to reinforce its partnership with JEC Group, sponsoring and manufacturing the JEC trophies for 2022,” comments Danu Chotikapanich, CEO, Cobra.  “These are two of the most prestigious and respected awards programs within the composites industry and one that also matches Cobra’s ongoing commitment to innovation and sustainability improvements. Working with the latest bio resin technology, natural fibre reinforcements and upcycled composite and wood production waste materials our Design and Development team have created some stunning trophies for this year’s award season.”

Source:

COBRA International Co.,Ltd.

22.03.2022

JEC World announces 2023 and 2024 dates

JEC World announces the dates of the show in 2023, taking place from April 25 to 27, and in 2024, from March 5 to 7, in Paris Nord Villepinte in the same halls.
Taking place every year for more than half a century, JEC World gathers the whole value chain of composite materials in Paris. The event brings together not only all major stakeholders of the composites industry but is also the place to be for innovative startups in the field of advanced materials, and for experts, academics, scientists and R&D leaders. For professionals from the various application sectors of composite materials, it is a unique showcase of what composites can offer, and an unlimited source of inspiration. So, with this two-years schedule, professionals can plan their participation while ahead to make the most out the show.

JEC World announces the dates of the show in 2023, taking place from April 25 to 27, and in 2024, from March 5 to 7, in Paris Nord Villepinte in the same halls.
Taking place every year for more than half a century, JEC World gathers the whole value chain of composite materials in Paris. The event brings together not only all major stakeholders of the composites industry but is also the place to be for innovative startups in the field of advanced materials, and for experts, academics, scientists and R&D leaders. For professionals from the various application sectors of composite materials, it is a unique showcase of what composites can offer, and an unlimited source of inspiration. So, with this two-years schedule, professionals can plan their participation while ahead to make the most out the show.

More information:
JEC Group JEC World
Source:

JEC

INDA Announces Six New Board Members and Officers (c) INDA
INDA New BOD Members 2022
08.03.2022

INDA Announces Six New Board Members and Officers

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

  • Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

  • Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

  • Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

  • Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

  • Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

  • Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

Source:

INDA, Association of the Nonwoven Fabrics Industry

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

19.07.2021

ISKO to work with the MIT Computer Science & Artificial Intelligence Lab

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

Source:

ISKO / Menabò Group srl

04.05.2021

More than 1,000 companies to exhibit at JEC Composites Connect

On June 1-2, 2021, JEC Composites Connect, the first round-the-clock digital event of the composites industry, will host significant industry players, enabling participants to discover their latest innovations. Three competitions the JEC Composites Challenge, the JEC Composites Startup Booster, and the famous JEC Composites Innovation Award, will also put the spotlights on the most innovative solutions and products this year

Key Figures

More than 1,000 companies from all the composites value chain spanning 46 countries will participate, network, and present their latest products on their digital booths.

Exhibitor’s breakdown by industrial sector :

  • Raw materials
  • Intermediate products
  • Equipment, tools, and ancillary products
  • Distribution, agents, and representation
  • Third parties, services, engineering, and R&D
  • Composite’s part producers and processors
  • Composite’s end-users and integrators

Highlighting excellence and innovation

On June 1-2, 2021, JEC Composites Connect, the first round-the-clock digital event of the composites industry, will host significant industry players, enabling participants to discover their latest innovations. Three competitions the JEC Composites Challenge, the JEC Composites Startup Booster, and the famous JEC Composites Innovation Award, will also put the spotlights on the most innovative solutions and products this year

Key Figures

More than 1,000 companies from all the composites value chain spanning 46 countries will participate, network, and present their latest products on their digital booths.

Exhibitor’s breakdown by industrial sector :

  • Raw materials
  • Intermediate products
  • Equipment, tools, and ancillary products
  • Distribution, agents, and representation
  • Third parties, services, engineering, and R&D
  • Composite’s part producers and processors
  • Composite’s end-users and integrators

Highlighting excellence and innovation

JEC Composites connect will also be the place to promote the composites sector’s biggest innovative projects. Many product launches are expected to be announced over the two days of the show, evidences a solidly dynamic sector led by high-performance and environmentally friendly innovations.

Among which 65 product launches are listed in the 2021 Innovation Report: from Raw materials, Intermediates and Ancillary, R&D to Production and Equipment, including Simulation and Measurement and Services.

Competitions and awards ceremonies

The JEC Composites Challenge will give the floor to ten young researchers from around the world on June 2nd at 12pm CEST. They will have five minutes to convince a panel of judges composed of leading industrial players in the composites sector. The competition builds bridges between research and industry and is a highlight of the event.

The 2021 JEC Composites Startup Booster has a line-up of 20 finalists who will pitch during two live sessions on June 1st from 10:30 am to 11:30 am and from 5 pm to 6 pm CEST. The 2021 JEC Composites Innovation Awards will celebrate the most innovative composites projects and fruitful collaborations between different value chain players in 2021.

Source:

JEC Group

JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region
JEC Forum DACH
06.04.2021

JEC FORUM DACH

  •  JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region

JEC Group and AVK, the Federation of Reinforced Plastics e.V. in Germany have joined forces to organize an annual event for the D-A-CH Region, dedicated to all forms of Composites and their applications. The first edition of the JEC Forum DACH, unique in its format and content, will take place in Frankfurt am Main, Germany at Messe Forum, from November 23 to 24, 2021. The event will take place at a different location each year to highlight the dynamics and the variety of the composites industry in the DACH region.

JEC Group is launching the JEC Forum DACH in partnership with AVK. Unique in its format, the event will be rotating to different cities in Germany, Switzerland and Austria  every year. This first edition will take place in Frankfurt am Main, Germany, from November 23 to 24, 2021.

  •  JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region

JEC Group and AVK, the Federation of Reinforced Plastics e.V. in Germany have joined forces to organize an annual event for the D-A-CH Region, dedicated to all forms of Composites and their applications. The first edition of the JEC Forum DACH, unique in its format and content, will take place in Frankfurt am Main, Germany at Messe Forum, from November 23 to 24, 2021. The event will take place at a different location each year to highlight the dynamics and the variety of the composites industry in the DACH region.

JEC Group is launching the JEC Forum DACH in partnership with AVK. Unique in its format, the event will be rotating to different cities in Germany, Switzerland and Austria  every year. This first edition will take place in Frankfurt am Main, Germany, from November 23 to 24, 2021.

JEC Forum DACH will include pre-arranged business meetings between sponsors and attendees as well as sponsors workshops. The event will present exclusive content such as an extensive composites conferences program, the annual AVK market overview — also available via live-streaming technology for remote participants — and, last but not least, the prestigious AVK-JEC Innovation Awards.
The JEC Startup Booster competition will also be introduced in the D-A-CH region for the first time. JEC Forum DACH will also provide a Composites Tour to enable participants to visit key players of the local composites ecosystem on November 25.

This event's primary aim is to support the bustling composites industry in this region and resume business after a challenging, yet complex period of time. The event´s agile format will focus on a different application sector, industry as well as other regional composites-related specifities every year. The final goal is to develop business, to connect and reach out to the local industrial apparatus and its major players such as universities, research and development centers and companies of all sizes in a boosting business and innovation spirit.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events
JEC Summit Sports & Health - Connect
15.12.2020

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

“Following the enforced postponement of many trade shows, we took the step of becoming the first organizer to stage an online event dedicated to composites in the sports and health industry. We put together a high-level conference agenda and speaker roster, and devised some great ideas for virtual networking, said Christian Strassburger, Event Director at JEC Group. “I could not be prouder of what we achieved with many delegates from Europe and Americas tuning in, including representatives from more than 36 countries. I would also like to take this opportunity to thank all our sponsors and partners. Their trust, support, and input were a crucial part of both the quality and success of the summit.”

The event attracted an audience of more than 1,100 professionals from the composites industry, from 36 countries, and helped organize 216 pre-arranged one to one meetings between buyers and sellers via our dedicated online meeting rooms, this without mentioning informal networking between participants. It reached these numbers, as participants logged on in considerable numbers to learn from the insights and ideas of the unparalleled line-up of high-level speakers who took part in the summit’s twenty-track conference.

The agenda for the JEC Summit Sports & Health – Connect featured tracks on current trends and Innovations in sports & health composite applications, with keynotes delivered by Dominic LeBlanc Senior Concept Engineer, at Callaway Golf, Christophe Lecomte, Director of Biomechanical Solutions R&D, at Össur, Fleur Jong, Professional Sprinter, and Co-founder of the Para Athletics Foundation and Damiano Salvatori, Materials Research Engineer, at the Straumann Group.

The panel of high-profile experts from Europe and America offered perspectives and inspiration for the next generation of medical and sports devices made of composites materials. The line-up included Bjorn Ivar Austrem, Technical Director, at Madshus, Laurine Calistri, Research Engineer, at Proteor, Anatole Gilliot, CEO of Suprem, Julien Duplay, Composites Methods Engineer, at Decathlon, Eric Jackson, President of Apex Watercraft, Stéphan Vérin, General Secretary, at EuraMaterials, Maximilian Segl, Principal Expert Composites, and Johannes Wölper, Development Engineer, both from Ottobock, and Matthew Dickinson, Senior Lecturer in Engineering, at University of Central Lancashire. Christos Karatzias, at Mitsui Chemicals Europe and Anthony Bert, at Helicoid Industries.

And one cannot omit the international startups that pitched all through the three-day event: ProsFit (Bulgaria), Alchemy (Greece), moi composites (Italy), Mercuris (Germany), Arevo/Superstrata (USA), Checkerspot/WNDR Alpine (USA), Ambrocio (Finland) Nairoby (Argentina). All gave inspiring and promising perspectives in the sector and what to look for in the near future.

Source:

JEC Press Relations

18.06.2018

Koch Membrane Systems PURON® MBR Product Selected for one of the Largest MBR Projects in China

Koch Membrane Systems, Inc. (Koch), a global leader in membrane filtration technologies, announced its PURON® Membrane Bio-Reactor (MBR) modules have been selected for the Ji’nan Wastewater Treatment Plant I and Plant II Expansion Project. Each plant will have 100,000 m3/day treating capacity. The site is located in the Shandong province, which is China’s second-most populated province, with over 100 million people. This project continues the strong presence of Koch’s PURON® MBR in various municipal and industrial wastewater treatment projects in China, demonstrating exceptional performance and creating value to clients.

Strict new discharge requirements by the Chinese government are forcing municipalities to upgrade or build their wastewater treatment plants using new technologies. PURON® MBR technology was selected for these two new plants for its reliable and consistent effluent quality, adherence to new discharge limits, and reduced footprint compared to conventional wastewater treatment technology.

Koch Membrane Systems, Inc. (Koch), a global leader in membrane filtration technologies, announced its PURON® Membrane Bio-Reactor (MBR) modules have been selected for the Ji’nan Wastewater Treatment Plant I and Plant II Expansion Project. Each plant will have 100,000 m3/day treating capacity. The site is located in the Shandong province, which is China’s second-most populated province, with over 100 million people. This project continues the strong presence of Koch’s PURON® MBR in various municipal and industrial wastewater treatment projects in China, demonstrating exceptional performance and creating value to clients.

Strict new discharge requirements by the Chinese government are forcing municipalities to upgrade or build their wastewater treatment plants using new technologies. PURON® MBR technology was selected for these two new plants for its reliable and consistent effluent quality, adherence to new discharge limits, and reduced footprint compared to conventional wastewater treatment technology.

These wastewater treatment plants will be built and operated by China Everbright Water Limited Co. Ltd, a company principally engaged in construction and operation of integrated environmental water services. The project is expected to be commissioned by the end of 2018.

“We have had good experience with Koch Membrane Systems PURON® MBR technology in the 55,000 m3/day Beijing Daxing Tiantanghe Waste Water Treatment Project,” said Mr. Wang Huailin, president of Jiangsu Kaimi Membrane Technology Co. Ltd, who will design, build and supply the membrane system for these plants. “Since the 2016 Beijing plant startup, the PURON® membranes have been used in an underground construction model to provide a pollution-free installation. We have been impressed with the low fouling and low operating costs from the PURON® product, due to its unique single header and central aeration design features and the process expertise Koch brings to the table.”

“Koch has developed advanced membrane solutions for the municipal and industrial market segments,” said Mr. Manny Singh, president of Koch Membrane Systems. “Unique features of our PURON® product help the market treat wastewater to meet strict discharge and reuse targets with a low cost of ownership. We are excited that Everbright Water Group recognized the benefits of our PURON® product in their existing plant and selected us for their flagship new projects.”

Source:

Koch Membrane Systems, Inc.

JEC World 2018 (c)AGENCE APOCOPE
Crowded aisle of JEC World 2018
08.03.2018

JEC World 2018: Composites Industry in Paris

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises.

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Source:

AGENCE APOCOPE

27.02.2018

JEC GROUP MAKES PARIS THE WORLD’S COMPOSITES CAPITAL

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

INNOVATION IN COMPOSITES
“Innovation is there with the raw materials, such as better-formulated resins (and even recyclable ones like thermoplastics) and higher-performance fibers like carbon, glass and aramid. Moreover, natural materials like starch for matrices and flax, hemp, sisal and bamboo for fibers are being introduced. There is also innovation in the ways composites are being used, and with the creation of completely new things like drones, electronic devices, hydrofoils and flying taxis. Composites are currently making progress everywhere there is a need for low weight and performance. They offer nearly infinite possibilities. These are truly the materials of the century. Designers are adopting them in a broad range of fields like smart cities, infrastructure, networks, transportation, medical devices, sports & leisure and design. Composites materials expand the field of possibilities.” explains Ms. MUTEL.

“MAKE IT REAL” AT THE 2018 JEC WORLD TRADE SHOW
To present the latest trends and innovations, the 2018 JEC World has even more surface area, with 68,000 square meters. The 1,350 exhibitors (from carbon fiber producer to auto builder, from designer to decorator, from research fellow to aircraft manufacturer) will display their latest advances. All stakeholders will be present at the show. JEC World received more than 40,000 professional visits last year, and is expecting 43,000 this year!

THE NEW “MUST” THINGS TO SEE
This year, JEC World will have four planets. Besides the aerospace, automotive and construction planets, there will be a new “Make it real” planet, which gives a preview of designer creations to be exhibited at the Ghent museum starting in October 2018. “We will show the many aspects of composites, and how these materials are being gradually incorporated into everyday objects,” adds Ms. MUTEL.
This year’s JEC World will feature a new “Composite Challenge” program that gives the floor to ten PhD students, who will be given five minutes to pitch their research projects with the help of a single slide. “True to its mission, the JEC Group has set up this new program to share the latest research on composites. But it is not just a way to share the most advanced knowledge, it also helps to bridge the gap between academics and the industry and to identify the industry’s next generation of leaders,” she says.
JEC World will also be the occasion to launch Flax & Hemp Fiber Composites, A Market Reality: The Biobased Solution for the Industry, a new book published by JEC Group on the use of plant-based materials.

KNOWLEDGE & NETWORKING PROGRAMS SUPPORTED BY JEC GROUP
The trade show will host well-known speakers, including Dirk AHLBORN, the CEO of Hyperloop Transportation Technologies, a company that is reinventing transportation with high-speed travel (up to 1,300 km/h, or 808 mph), and Yves ROSSY, aircraft pilot and inventor of the first jet-powered wingpack, with which he is able to reach speeds of up to 300 km/h, or 186 mph. The Startup Booster program will pay tribute to startups, and the JEC Innovation Awards program, to innovations. For the first time, the public will be invited to vote on these two programs!
Six new conferences will also address the latest technical advances that are moving the sector forward, and a Composites in Action program will present live demonstrations throughout the show, in three different places.

More information:
JEC World JEC Group
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE