From the Sector

Reset
302 results
(c) Beaulieu International Group
05.05.2022

B.I.G. Yarns at Clerkenwell Design Week with carpet tile collections

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns continues to extend its ranges to reduce fossil-carbon in the industry and encourage greater product circularity. Its EqoCycle PA6 yarns incorporate recycled content originating from recycled and regenerated PA6 and are fully recyclable, improving resource efficiency and other environmental benefits throughout the value chain. Carpet tufters can also contribute to a sustainable future through less use of fossil resources and reduced greenhouse gas emissions with EqoBalance yarns. Both ranges offer the same high-quality performance as virgin-based yarns.

Source:

Beaulieu International Group / EMG

Kornit Rewrites the Rules for Fashion and Textiles (c) Kornit
Shai-Shalom-Hi2
06.04.2022

Kornit Rewrites the Rules for Fashion and Textiles

  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today fr
  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from major limitations with mass customization of polyester

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, announced today the Company will present the convergence of design, technology, and sustainable fashion at Kornit Fashion Week Tel Aviv 2022, April 3rd – 6th. Rewriting the rules for fashion and textiles, the transformative event will unveil vibrant runway collections together with game-changing industry-first product and technology introductions that bring digital production to the mainstream.

The four-day event is attended by some of the top designers, retailers, brands, fulfillers, and ecommerce players, in addition to global investors and press – and will include exclusive VIP experiences demonstrating the confluence of the design, technology, and fashion worlds. Together, these three elements are central to Kornit’s 4.0 strategy, bringing sustainable, on-demand fashion to the mainstream with end-to-end workflow solutions.

Kornit Fashion Week Tel Aviv 2022

Kornit Fashion Week features an immersive runway showcase produced by worldwide fashion icon, producer, director, and entrepreneur Motty Reif. The week follows successful Kornit events in 2021 across Los Angeles, New York, Milan, and Tel Aviv – displaying the creative freedom associated with sustainable, on-demand fashion fulfillment. Attendees will experience runway events showcasing designer creativity across a broad array of collections. These fascinating collections were created in just a few weeks, unlike typical fashion and textile production processes that take over six months.

Industry-First Introductions

Looking behind the scenes at Kornit Fashion Week, attendees will witness Kornit’s disruptive mass production technology in action. Unveiled for the first time, the Kornit Apollo direct-to-garment (DTG) system addresses accelerated post-pandemic market trends for streamlined supply chains and production nearshoring. Demonstrated at an exclusive VIP event, Kornit Apollo features the Company’s proven MAX technology offering the highest retail quality combined with full automation control and integrated smart curing processes, utilizing functionality from Lichtenau, Germany-based Tesoma (Kornit’s recently announced acquisition). The solution is the most comprehensive digital, single-step end-to-end system for nearshore short-and-medium-runs mass production and offers optimal TCO and highest output per operator. The result far surpasses performance of screen printing and analog techniques. With early customer engagements in the second half of 2022, the system will be available mid-2023.

Physical and Virtual Worlds

Kornit enables customers to exchange supply chain headaches and materials waste for unsurpassed creativity and a frictionless pixel-to-parcel-to-doorstep production experience. Supported by the KornitX workflow solution, customers have access to a scalable and modular ecosystem for on-demand decorated apparel and textiles. Supporting diverse supply chain models, the infrastructure-agnostic system enables on-demand, automated production, end-to-end from initial order to package delivery.

Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel (c) Kornit
Kornit Atlas MAX Poly
06.04.2022

Kornit Digital Printing for Unique Fashion

  • Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel
  • Kornit Atlas MAX Poly to Transform Professional and Recreational Sportswear, Teamwear, and Sports Brands; Injecting Life into Apparel with Power of Design Across Full Color Gamut

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, introduced today its distinctive Kornit Atlas MAX Poly system – an industry-first direct-to-garment (DTG) solution delivering superior-quality digital decoration for vibrant, colorful design on polyester and poly-blended apparel.

  • Kornit Digital Introduces High-Volume Digital Production Solution for Vibrant Decorative Designs on Polyester and Polyester-Blended Apparel
  • Kornit Atlas MAX Poly to Transform Professional and Recreational Sportswear, Teamwear, and Sports Brands; Injecting Life into Apparel with Power of Design Across Full Color Gamut

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, introduced today its distinctive Kornit Atlas MAX Poly system – an industry-first direct-to-garment (DTG) solution delivering superior-quality digital decoration for vibrant, colorful design on polyester and poly-blended apparel.

Kornit’s Atlas MAX Poly capitalizes on the demand for fashionable, unique sportswear and apparel. As the industry emerges from a post-pandemic environment in which athletic and leisurewear became mainstream, there is increasing demand for apparel combining polyester and poly-blends with vivid designs across a range of colors. Atlas MAX Poly can transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, limited today by limitations in mass customization of polyester.

“Kornit Atlas MAX Poly is a game-changer,” said Omer Kulka, Chief Marketing Officer at Kornit Digital. “As fashion and sports apparel merge, there’s new opportunity for innovative fashion on polyester, currently the fastest-growing textile vertical. For the first time, recreational sportswear, promotional, and sports brands can embrace vibrant and colorful design with Kornit’s proven MAX technology – setting superior quality standards for on-demand production previously not possible.”

Unveiled during Kornit Fashion Week Tel Aviv 2022, Atlas MAX Poly incorporates Kornit’s field-proven MAX technology for high-quality premium decoration, process automation, and smart autonomous quality control. With Kornit’s XDi decorative applications, Atlas MAX Poly enables endless designs and creativity on polyester, and empowers new styles for multiple effects and unlimited combinations such as emulating threadless embroidery, high-density vinyl, screen transfer emulations, and 3D effects.

The solution is compatible with mesh and plain fabrics, including brushed polyester, while maintaining durability and breathability. It brings the highest throughput for on-demand polyester decoration, reducing total cost of ownership to drive profitability. Customers gain competitive advantage via Pantone color-matching and a wide color gamut including neon colors for bright and vibrant impressions, using single-step mechanisms minimizing production footprints while maximizing versatility.

Beyond superior quality, graphics, color, and application variety, Kornit Atlas MAX Poly offers efficient, reliable, profitable end-to-end polyester production via:

  • Kornit’s ActiveLoad automated garment-loading and pallet adjustment for repeatable, high-quality output with minimal errors reducing time and waste, eliminating operator ramp-up and boosting throughput up to 20%.
  • Seamless integration with KornitX Global Fulfillment Network, enabling a pixel-to-parcel-to-doorstep experience. This unleashes untapped demand for polyester short-run production, personalization, and disruptive direct-to-fan and direct-to-recreational business models.
  • Integration with KornitX’s workflow ecosystem and Kornit Konnect™ dashboard, optimizing process visibility and control, adding data-driven insights for production floor efficiencies.
Photo: Pixabay
30.03.2022

EURATEX comments “Strategy for Sustainable Textile” calling for a realistic implementation

Today, March 30, the European Commission released its long-awaited Strategy for Sustainable Textile, with the ambition to move the sector towards the path of sustainability. EURATEX welcomes the EU ambitions to act on sustainable textiles and investments, in order to change how textiles are made, chosen and recovered, but calls for a smart and realistic implementation. Many European companies have already chosen this path, therefore the strategy should support them in this process, especially considering today’s energy crisis.

The strategy recognises the strategic importance of textiles, which are not only used as apparel or furniture, but applied in cars, medical equipment, agriculture, etc. It acknowledges the European Industry pro-active initiatives to tackle microplastics, to solve challenges of market surveillance and the skills needs. More cooperation is needed for re-use and recycling of textiles and to set up an EU market for secondary raw materials. On this last point, EURATEX ReHubs initiative is developing proposals to size EPR potential, to transform waste into value, and create a new capacity and jobs.

Today, March 30, the European Commission released its long-awaited Strategy for Sustainable Textile, with the ambition to move the sector towards the path of sustainability. EURATEX welcomes the EU ambitions to act on sustainable textiles and investments, in order to change how textiles are made, chosen and recovered, but calls for a smart and realistic implementation. Many European companies have already chosen this path, therefore the strategy should support them in this process, especially considering today’s energy crisis.

The strategy recognises the strategic importance of textiles, which are not only used as apparel or furniture, but applied in cars, medical equipment, agriculture, etc. It acknowledges the European Industry pro-active initiatives to tackle microplastics, to solve challenges of market surveillance and the skills needs. More cooperation is needed for re-use and recycling of textiles and to set up an EU market for secondary raw materials. On this last point, EURATEX ReHubs initiative is developing proposals to size EPR potential, to transform waste into value, and create a new capacity and jobs.

The proposed “transition pathways”, which will translate the strategy into action, will be critical in this respect: how will these sustainability targets be reached, what will the cost for SMEs be, how can companies be supported in that green transition, what about the impact on global competitiveness? These are essential questions to be addressed in the coming months.
The Textile strategy is part of much broader package, including as many as 16 new legislative actions and other policies which will directly impact on textile value chain. In particular the Sustainable Product Initiative Regulation released on March, 30 includes game-changing provisions on Digital Product Passport, Eco-Design, SMEs and Green Public Procurement.  The Regulation has an overwhelming ambition and, to be realistic, it would require a new way of joint working between institutions and business, and which builds on lessons learned on data flow across value chains, interoperability, conformity assessment and effective measures to support SMEs.

If wrongly implemented, such an unprecedented wave may cause a complete collapse of the European textile value chain under the burden of restrictions, requirements, costs and unlevel playing field. On the contrary, the changes ahead can boom the entire textile ecosystem and create a model of successful green and digital transition in manufacturing, which starts in Europe and expands globally.

Already in 2019, EURATEX asked policy makers to work together and remove barriers to circular economy, solve the market surveillance paradox in which laws are made but not checked, and to help create scale economies to make sustainable textiles affordable, hence the norm.

For example, there are 28 billion products circulating per year in EU, which is an impressive task for market surveillance authorities including customs. EURATEX has been stressing non-sufficient market surveillance and it is actively working on solutions for a fair and effective market surveillance of textile products through Reach4Textiles. EURATEX very much welcomes that the European Commission recognizes our work and the need for market surveillance by establishing more harmonised efforts in the EU.

EURATEX also welcomes the establishment of the Digital Product Passport. It has a high potential to improve every step in the textile value chain, from design and manufacturing to recycling and purchasing. At the same time, EURATEX calls the co-legislators to take into account the role of SME’s in this transition and to put forward pragmatic initiatives, supporting SME’s across the EU in a systematic approach.

Alberto Paccanelli, EURATEX President, concludes: EURATEX calls for true cooperation with all policy makers and other stakeholders across the value chains to advise, pressure-test and use this opportunity for a successful transition. Our ambition must be to reconcile sustainability, resilience and competitiveness; we know it can be done”.

Source:

EURATEX

30.03.2022

Carbios & Indorama Ventures: Manufacturing plant for fully bio-recycled PET

  • The plan for the reference plant is to be operational in 2025 in France (Longlaville) with a processing capacity of 50.000 tons of PET waste per year and creating 150 direct and indirect new jobs.
  • Indorama Ventures, the world’s largest producer of recycled PET for beverage bottles, plans to co-invest in this project3 and will consider expanding Carbios’ unique biological recycling process at other PET sites4 for future developments.
  • This strategic project is strongly supported by the French Government and the Grand-Est Region, with significant non-dilutive financing.

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers and Indorama Ventures (Bloomberg ticker: IVL.TB), one of the world-leading PET manufacturer, jointly announced a collaboration to build a manufacturing plant operating Carbios’ PET bio-recycling technology at Indorama Ventures’ PET production site in France (Longlaville, Meurthe-et-Moselle).

  • The plan for the reference plant is to be operational in 2025 in France (Longlaville) with a processing capacity of 50.000 tons of PET waste per year and creating 150 direct and indirect new jobs.
  • Indorama Ventures, the world’s largest producer of recycled PET for beverage bottles, plans to co-invest in this project3 and will consider expanding Carbios’ unique biological recycling process at other PET sites4 for future developments.
  • This strategic project is strongly supported by the French Government and the Grand-Est Region, with significant non-dilutive financing.

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers and Indorama Ventures (Bloomberg ticker: IVL.TB), one of the world-leading PET manufacturer, jointly announced a collaboration to build a manufacturing plant operating Carbios’ PET bio-recycling technology at Indorama Ventures’ PET production site in France (Longlaville, Meurthe-et-Moselle).

After having successfully started-up its demonstration plant in Clermont-Ferrand, Carbios is moving one step further towards the industrialization and commercialization by partnering with Indorama Ventures. The goal is to build and operate in France the world’s first industrial-scale enzymatic PET bio-recycling plant, with a processing capacity estimated at ca. 50.000 tons of post-consumer PET waste per year, equivalent to 2 billion PET bottles or 2.5 billion PET trays.

The capital investment required for the project is expected to be around €150 million for Carbios core technology, including in particular an additional purification step, which has been integrated into the process. In addition, an estimated €50 million investment will be allocated for the infrastructure preparation of the site. The project is expected to create approximatively 150 direct and indirect full-time jobs. In the coming months, Carbios expects to finalize a strong non-dilutive financial support from French Government and from the Grand-Est Region5, based on the offer received last week by Carbios, from the Minister of Industry, Agnès Pannier-Runacher and the President of Grand-Est Region, Jean Rottner.

This financial support will be conditional on the notification to the European Commission and on contractualization by French authorities. Carbios announced in its half-year results on the 30th September 2021 a cash position of €112 million. Since then, Carbios has also secured a €30 million loan from EIB.

Source:

Carbios

28.03.2022

Startups and AkzoNobel sign letters of intent for joint collaboration

Less than 24 hours after winning Paint the Future awards, three startups have already signed their letters of intent to continue working together on sustainable business opportunities with AkzoNobel.

It’s the next step of a continuing collaborative innovation journey. The startups had the opportunity to explore their solutions with their mentors and industry experts through each phase of the global startup challenge, including an intense three-day bootcamp. Now having signed the letters of intent, they will develop their solutions even further with AkzoNobel.

“The winning startups are joining our go-to-market acceleration program, connecting them to a global network of people and resources,” says Menno van der Zalm, Director of the AkzoNobel Incubator. “Over the next six months, we’ll work together to validate their solutions for our customers and develop a joint value case.”

The following three solutions won over the international jury of experts and business leaders:

Less than 24 hours after winning Paint the Future awards, three startups have already signed their letters of intent to continue working together on sustainable business opportunities with AkzoNobel.

It’s the next step of a continuing collaborative innovation journey. The startups had the opportunity to explore their solutions with their mentors and industry experts through each phase of the global startup challenge, including an intense three-day bootcamp. Now having signed the letters of intent, they will develop their solutions even further with AkzoNobel.

“The winning startups are joining our go-to-market acceleration program, connecting them to a global network of people and resources,” says Menno van der Zalm, Director of the AkzoNobel Incubator. “Over the next six months, we’ll work together to validate their solutions for our customers and develop a joint value case.”

The following three solutions won over the international jury of experts and business leaders:

  • Winner: SolCold
    The solution from Israeli startup SolCold is a sustainable self-cooling coating based on anti-Stokes. It uses the sun’s energy to keep the inside temperature much cooler without having to use any electricity.
  • Winner: Aerones
    Latvian startup Aerones brings a robotic solution to wind turbine maintenance. Their crawling robot allows technicians to safely and efficiently perform inspections, cleaning and repairs at height.
  • Winner: SprayVision
    From the Czech Republic, SprayVision brings a data-driven approach to optimizing spray application of paint, offering customers full control over the process. The solution helps to reduce environmental impact by saving material and improving quality.
Source:

AkzoNobel

(c) PREMIUM Exhibitions GmbH
25.03.2022

Premium Group presents: The Ground Festival

Premium Group presents its D2C festival The Ground, which premieres from 7 - 9 July at Messe Berlin. The Ground is a new event format where fashion, lifestyle, culture, and diverse perspectives are merged. It was founded to bring brands and consumers together to build a better future through celebration and collective action.

Over three days, guests from across Europe will meet up to experience innovative brand pop-ups with stories and collections, panel talks, live music, physical and mental health activations, and even step inside the Metaverse.

Power of purpose
The Ground mainly targets Gen Z which is driven by a deep sense of purpose. The 18-29 year olds expect the brands they support to share the same values. Their priorities are sustainability, relationships, health and wellness, work and education as well as inclusivity and individuality.

The Ground features six distinct areas where visitors can take part in different experiences: Sport, Beauty, Music, Play, Soul and Talk provide inspiration and many moments to learn. Fashion is featured throughout all areas and is the connecting element of The Ground.

Premium Group presents its D2C festival The Ground, which premieres from 7 - 9 July at Messe Berlin. The Ground is a new event format where fashion, lifestyle, culture, and diverse perspectives are merged. It was founded to bring brands and consumers together to build a better future through celebration and collective action.

Over three days, guests from across Europe will meet up to experience innovative brand pop-ups with stories and collections, panel talks, live music, physical and mental health activations, and even step inside the Metaverse.

Power of purpose
The Ground mainly targets Gen Z which is driven by a deep sense of purpose. The 18-29 year olds expect the brands they support to share the same values. Their priorities are sustainability, relationships, health and wellness, work and education as well as inclusivity and individuality.

The Ground features six distinct areas where visitors can take part in different experiences: Sport, Beauty, Music, Play, Soul and Talk provide inspiration and many moments to learn. Fashion is featured throughout all areas and is the connecting element of The Ground.

Special season topic: MAKE PEACE!
Building off the Good Life Goals (personal actions that everyone can take to help support the SDGs by the UN), The Ground focuses on one goal for each edition that touches people and brands at this moment in time. A goal that makes a positive contribution to the future, and is thus worth celebrating.

Due to the current conflicts in the world, this July’s goal is more clear than ever: PEACE! It will be reflected in a big charity auction of specially designed pieces of the exhibiting brands and partners.

1 ticket - 4 events
Taking place simultaneously as the trade show and conference formats SEEK, PREMIUM and FashionTech which will attract over 20,000 buyers, retailers, brands, professionals, influencers, and media to Berlin – The Ground will help to create lots of fashion buzz in the capital. The all-in-one ticket for trade visitors also guarantees access to The Ground.

Source:

PREMIUM Exhibitions GmbH     

Photo: Dibella b.v.
24.03.2022

Textile Service Industry: New cooperative brings closed chain closer

Five players in the textile service industry announce the establishment of Cibutex (Circular Business Textiles). This new cooperative is dedicated to the recycling and recovery of fibres from discarded textiles. Cibutex wants to contribute to a circular textile chain through cooperation in the whole sector.

Five players in the textile service industry announce the establishment of Cibutex (Circular Business Textiles). This new cooperative is dedicated to the recycling and recovery of fibres from discarded textiles. Cibutex wants to contribute to a circular textile chain through cooperation in the whole sector.

The textile service has been implementing key Circular Economy solutions for some time: rental, care, repair and reuse of textiles for professional use. "As an industry, we are in a position to delve even deeper into the world of the circular economy. Every linen rental company has many of the same products, which go through the same process every time: the textiles are washed, sorted and collected again after the period of use. After many washes, the textiles are rejected. With this rejected textile, we see a unique opportunity to finally put the idea of a closed textile chain into practice. The used textiles that have reached the end of their useful life can be recycled on an industrial scale and the fibre raw materials can be recovered to make new textiles. We want to exploit this potential to the full by founding Cibutex, a cooperative for all textile service providers in Europe," says Cibutex director Jan Lamme, explaining the background of the unique project.

Cross-competitive goal
The founders of Cibutex are four well-known, competing textile service companies and one supply partner: Blycolin Textile Services (Zaltbommel, NL), Dibella (Aalten), Edelweiss Groep (The Hague), Lamme Textile Management (Amsterdam, NL) and Nedlin (Elsloo, NL). The companies have deliberately joined forces in order to implement sustainability in textiles and clothing by means of closed material cycles throughout the sector.

"Important resources are hidden in our B2B used textiles. We want to recover these in cooperation with relevant recycling companies and thus promote textile recycling as demanded by the EU Commission. We have come together to achieve sufficient critical mass to determine the final recycling of our discarded laundry, with the goal of moving from textiles to textiles," says co-founder Luuk de Win (Nedlin).

Sustainable eco-balance
"By recycling the raw materials of our used textiles, we contribute to reducing the social, environmental and climate impacts of the textile industry related to cultivation and production, and this leads to a long-term improvement of the ecological footprint of our industry," adds co-founder Marc van Boekholt (Blycolin).

Increasing value
To make the final transformation step of the circular economic model "textile service" a success, any European textile service company can become a member of Cibutex. The cooperative takes care of the collection, transport to the recycling partners and remuneration for the old textiles, which are now limited to bed linen, table linen and bath linen. In the future, however, the group wants to develop solutions for other textiles as well. For example, the recycling of workwear is also on the agenda. The founders of Cibutex agree that this too is a treasure trove of resources that must be addressed.

 

Source:

Dibella b.v.

Archroma Launches Nylosan® (a) Archroma
Archroma launches long-awaited metal-free* and halogen-free* Nylosan® S navy and black colors for sportswear.
23.03.2022

Archroma Launches Nylosan®

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • First, the Nylosan® S range offers metal-free* alternatives to dyestuff generally used to dye polyamide and nylon and which usually contain metals. The new Nylosan® Navy S-3R and Black S-3N are taking the industry standard one step further by offering a halogen-free* option to those manufacturers, brands and retailers who are looking to offer the safest grade available.
  • Second, the Nylosan® S range now comprises a wide gamut of colors, with these new dyes targeting the color matching and fastness specifications of the iconic blacks and navies of major sportswear brands. In order to support this color matching process, Archroma makes available the colorimetric dye primaries for the mills in order to (re)match the color standards.
  • Third, the new navy and black dyes display the same color constancy as the dyes used in many leading color standards, which means the navy and black colors created with Nylosan® S range will be non-metameric to the color standard under multiple light sources, whether artificial or natural, indoor or outdoor.
  • And fourth, the introduction of the new Nylosan® Black S-3N makes dyeing a metal-free* black on polyamide finally possible – something that was not available before.

Both dyes display the other usual features allowed of the Nylosan® S range, i.e., high fastness and buildup, and a wide shading gamut for industry-leading metal-free* acid dyes. They are REACH registered and bluesign® approved.

In addition, with the new Nylosan® Navy S-3R and Black S-3N at the core of its new CONSCIOUSLY DEEP system, Archroma is offering another very welcome benefit in the production of polyamide articles: resource saving. As most sportswear manufacturers and brands know, creating durable dark colors on nylon is a complex process that uses massive amounts of water and energy. Archroma therefore designed the new CONSCIOUSLY DEEP system to allow a highly efficient scour dyeing process reduced from 6 to 2 baths. This results into reducing the process time by up to 36%, water consumption by up to 64%, energy by up to 46%, and CO2 emissions by up to 41% compared to conventional benchmark process.

Source:

EMG

21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

Source:

Oeko-Tex

(c) EREMA Group GmbH
17.03.2022

EREMA: Working together with Recycling Company Anviplas

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

Employing 64 people, Anviplas recycles post-industrial and post-consumer plastic waste, especially HD and LD-PE as well as PP, to make recycled pellets in all colour variations. The production capacity is 1,800 tonnes per month. An EREMA type INTAREMA® 1716 TVEplus® recycling machine with screen changer is in operation at the site in Navarcles (Barcelona) for processing the PP material stream. This patented extruder system was developed for handling difficult-to-process materials, such as heavily printed films as well as very moist waste. This machine is characterised by its optimised 3-stage degassing system; firstly by preheating and predrying the material in the preconditioning unit, secondly because the screw design allows reverse degassing, and thirdly in the degassing zone of the extruder.

Anviplas customers manufacture a huge bandwidth of products made using their recycled pellets. They range from various film products, such as stretch, shrink, mulch and silage films, to irrigation, corrugated and high-pressure pipes, as well as containers such as tubs, bottles, barrels and crates.

In February 2022 the Repeats Group, a pan-European platform for LDPE recycling, and Anviplas announced, that Repeats has made an investment in the Spanish recycling company. For Repeats this investment in Anviplas represents an important step in building a pan-European plastics recycling platform.

More information:
EREMA Recycling plastics Anviplas
Source:

EREMA Group GmbH

16.03.2022

Sarah Borghi's Green Collection is back with a range of sustainable tights and stockings

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

A decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze. Sarah Borghi is one of the first Italian companies in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

A decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze. Sarah Borghi is one of the first Italian companies in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
 
The collection features two new generation materials. One is Amni Soul Eco®, a biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.


*Reference System: ASTM D5511 - Standard Test Method for the Determination of Anaerobic Biodegradation of Plastics Under High-solids Anaerobic Digestion Conditions
** The Cradle-to-Cradle Product Innovation Institute, a non -profit organization, administer the Cradle-to-Cradle Certified™ Product Standard. It was created to bring about a new industrial revolution that turns the making of things into a positive force of society, economy and the planet. The Cradle-to-Cradle Certified Product Standard™ provides designers and manufacturers with criteria and requirements for continually improving what products are made of and how they are made aiming to achieve a circular economy approach.

Source:

ROICA™ / Sarah Borghi / GB Network

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand (c) Kornit Digital
Kornit XDi at Snuggle
14.03.2022

Snuggle Implements Kornit Atlas MAX Systems to Support Sustained Growth in Sustainable, Efficient Production on Demand

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

  • “The Atlas MAX technology provides a marked improvement in quality; it gives you that edge and something different."

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand, digital textile production technologies, announced today that Peterborough, United Kingdom-based print provider Snuggle has installed two Kornit Atlas MAX systems for superior versatility in their on-demand fulfilment production operations. A Kornit customer since 2017, the addition of Kornit’s most advanced direct-to-garment production systems reflects Snuggle’s sustained profitability and growth since that time.

Kornit Atlas MAX is the first digital direct-to-garment production system to feature XDi technology, which empowers users to simulate embroidery, dye sublimation, vinyl heat transfer, and 3D graphic effects with one single-step platform, using Kornit’s eco-friendly NeoPigment™ inks. Delivering superior graphic detail, consistent retail quality, and low and consistent cost per print to ensure profitability in any quantity, the system is engineered for adaptability to long-term automation needs, which helps businesses like Snuggle address the ongoing labour shortage.

With seven Kornit Digital systems in total, Snuggle is now able to produce up to 12,000 units daily, and has expanded its production space more than threefold since first investing in the technology. While the business does include an embroidery unit, Snuggle rejected screen printing due to its slow setup process, inefficient sampling for bulk orders, and the inability to generate profit from smaller custom orders. Furthermore, digitally-enabled production on demand was critical to their adapting when the pandemic economy caused many customers to cancel bulk orders suddenly.

More information:
Kornit Digital Atlas MAX
Source:

Kornit Digital

13.03.2022

JEC Group supports Composites Expert To launch E-learning Composites Academy

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

“One of JEC Group’s objectives is to develop access to education to help the composites industry to attract and train talented professionals. So, we are very proud to announce this partnership and to support Composites Expert initiatives, as joining common efforts and strategies will benefit to the overall industry”, stated Anne-Carole Barbarin, Content and Product development Director.

“The partnership with JEC Group is a major step towards the development of our training platform, while several manufacturers have already supported us, such as Arkema, Chomarat, Daher, Diatex, Pinette PEI, Porcher, Sopara, joining JEC World to officially launch our platform is an amazing opportunity.”, stated Jean-Pierre Cauchois, CEO Composites Expert.

These training sessions are targeting companies’ employees who would like to improve their expertise, to study professional reconversion, the companies who would like to know more or use composite materials, and universities and school for students to go from theory to practical exercises.

Source:

JEC Group

Photo: Pixabay
10.03.2022

Carbios: White PET fiber from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste
Worldwide, around 90 million tons of PET are produced each year, more than 2/3 of which are used to manufacture fibers. However, only 13% of textile waste is currently recycled, mainly for downcycling, i.e. for lower quality applications (such as padding, insulators or rags). By successfully manufacturing at pilot scale a white PET fiber that is 100% enzymatically recycled from colored textile waste, Carbios is paving the way for the circular economy in the textile industry.  C-ZYME™ is now on the doorstep of industrialization and will soon enable the biggest brands to move closer to their sustainability goals.
 
Emmanuel Ladent, Chief Executive Officer of Carbios: « Thanks to our breakthrough process, it will soon be possible to manufacture, on a large scale, t-shirts or bottles using polyester textile waste as raw material. This is a major breakthrough that gives value to waste that currently has little or no value. It is a concrete solution that opens up a global market of 60 million tons per year of potential raw materials and will help to reduce the use of fossil resources. »
 
Separate collection of textile waste soon to be mandatory in Europe
From 1 January 2025 the separate collection of textile waste, which is already in place in some countries, will be mandatory for all EU Member States (European Directive 2018/851 on waste).  Carbios’ process will enable this waste to be sustainably recovered and included in a true circular economy model.
 
These technological validations were carried out as part of the CE-PET research project, co-funded by ADEME3. In particular, the project aimed to develop Carbios’ enzymatic PET recycling process on textile waste. The C-ZYME™ technology is complementary to thermomechanical recycling and will make it possible to process plastic and textile waste deposits that are currently not or poorly recovered. For the validation of this stage of the project, Carbios received €827,200 (€206,800 in grants and €620,400 in repayable advances).

More information:
Carbios PET textile waste
Source:

Carbios

Kornit Digital and Fashion-Enter Bring Fashion and Textile Production Back to the UK with Sustainable, On-Demand Digital Manufacturing (c) Kornit
Kornit Digital & Fashion Enter Innovation Centre
08.03.2022

Kornit Digital and Fashion-Enter Bring Fashion and Textile Production Back to the UK with Sustainable, On-Demand Digital Manufacturing

  • Unveil UK’s first-ever sustainable Fashtech Innovation Centre, displaying mass customization capabilities empowering designers, apparel brands, and other creatives

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand digital fashionx and textile production technologies and Fashion-Enter - a social enteprise, which strives to be a centre of excellence for sampling, grading, production, and for learning and development of skills within the fashion and textiles industry – today announced a first-of-its-kind Fashtech Innovation Centre in London. Aimed at bringing on-demand fashion and textile mass customization back to the UK, and unveiled on March 3rd and 4th, 2022 at Fashion-Enter's state-of-the-art training and manufacturing site, the Centre is fully supported by Kornit Digital's revolutionary, direct-to-fabric and direct-to-garment digital production solutions.

  • Unveil UK’s first-ever sustainable Fashtech Innovation Centre, displaying mass customization capabilities empowering designers, apparel brands, and other creatives

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand digital fashionx and textile production technologies and Fashion-Enter - a social enteprise, which strives to be a centre of excellence for sampling, grading, production, and for learning and development of skills within the fashion and textiles industry – today announced a first-of-its-kind Fashtech Innovation Centre in London. Aimed at bringing on-demand fashion and textile mass customization back to the UK, and unveiled on March 3rd and 4th, 2022 at Fashion-Enter's state-of-the-art training and manufacturing site, the Centre is fully supported by Kornit Digital's revolutionary, direct-to-fabric and direct-to-garment digital production solutions.

According to Kornit Digital’s Impact and Environmental, Social and Governance (ESG) report, 30 percent of textile production is overproduction, while 95 percent of water waste is created as companies globally look towards more sustainable futures with customized, creative, and real-time offerings. Using proprietary streamlined, eco-friendly digital production technologies, Kornit Digital is transforming the fashion industry with more efficient and sustainable processes. According to the same report, by 2026, the Company’s systems will use up to 95 percent less water, 94 percent less energy and produce 83 percent less greenhouse gas emissions.

In addition to highlighting production capabilities that minimize carbon footprint, the Fashtech Innovation Centre serves as a prototype for brands and fulfillers seeking to mitigate logistical complexities, time-to-market, and supply chain risks by bringing production nearer to the end consumer. Eliminating overproduction and producing on demand, this nearshoring model drives profitability even in highly regulated and high-cost markets while contributing to local economies and removing transport-related waste.

Serving as a fulfilment site and academy for training production, the Centre includes both Kornit Presto direct-to-fabric and Kornit Atlas MAX direct-to-garment systems, as well as numerous graphic design and workflow tools and systems to enable cut-and-sew operations for a comprehensive “pixel to parcel to doorstep” cycle. Consolidating the process into a single location helps maintain full visibility and control of operations and products. Taking this one step further for creators and brands, visitors can experience the KornitX Global Fulfilment Network, enabling customers to create both new sales channels and accessibility to enable production on demand. Attendees can see how Kornit’s single-step digital production technology empowers unlimited graphic expression using less floor space, resources, waste, and time—all at higher margins.

“This Innovation Centre makes it possible to capture the full, end-to-end production process in one, single location,” said Jenny Holloway, Chief Executive Officer, Fashion-Enter. “The beauty of having print on demand means there are no minimums, so we can make one garment, or we can make up to 30,000 garments a week from all locations at the same fixed cost. Here, we can also train future generations on the right way of producing garments for today, responsive to demand, with minimal waste—ethical and sustainable. This is the future of fashion and textiles.”

03.03.2022

Lenzing opens lyocell plant in Thailand

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

The construction of the plant located at Industrial Park 304 in Prachinburi, around 150 kilometers northeast of Bangkok, started in the second half of 2019 and proceeded largely according to plan, despite the challenges arising from the COVID-19 pandemic. The recruiting and onboarding of new employees has been successful. Investments (CAPEX) amounted to approx. EUR 400 mn.

“The demand for our wood-based, biodegradable specialty fibers under the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands is growing very well. In Asia in particular, we see huge growth potential for our brands based on sustainable innovation. With the production start of the lyocell plant in Thailand, Lenzing reached an important milestone in its growth journey, supporting our ambitious goal to make the textile and nonwoven industries more sustainable”, said Robert van de Kerkhof, Member of the Managing Board.

In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030. The target is to be climate-neutral by 2050. Due to the established infrastructure, the site in Thailand can be supplied with sustainable biogenic energy and contribute significantly to climate protection.

Together with the key project in Brazil and the substantial investments at the existing sites in Asia, Lenzing is currently implementing the largest investment program in its corporate history (with more than approx. EUR 1.5 bn). Lenzing will continue to drive the execution of its strategic projects, which are to make a significant contri-bution to earnings from 2022.

Source:

Lenzing AG

(c) adidas
25.02.2022

adidas unveils its first product with Spinnova

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

adidas is committed to helping end plastic waste via a three-loop strategy that consists of using recycled materials, materials that can be remade into entirely new products, and, in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1. Its outdoor brand, adidas TERREX , is leading the innovation of technical materials with the aim of helping drive better product solutions for adventurers in nature while ensuring there is no compromise on style or performance .

By 2025, nine out of 10 adidas articles will carry a more sustainable technology, material, design, or method of manufacturing and adidas’ partnership with Spinnova is a major part of this journey.

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

(c) Zünd Systemtechnik AG
16.02.2022

Zünd: Award-winning software tools for automated cutting

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

  • PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
     
  • The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
     
  •  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

Source:

Zünd Systemtechnik AG