From the Sector

Reset
885 results
Foto: Textil vernetzt
24.06.2022

Fachtagung von Textil vernetzt auf der Techtextil

Seit knapp fünf Jahren begleitet das Mittelstand 4.0-Kompetenzzentrum Textil vernetzt kleine und mittlere Unternehmen der Textil- und Modeindustrie, des Textilmaschinenbaus und angrenzender Branchen beim Ausbau ihrer digitalen Fitness.

Wie die textile Wertschöpfung mit Blockchain, KI und Robotik nachhaltiger, individueller und zuverlässiger werden kann, stand im Fokus der diesjährigen Fachtagung des Kompetenzzentrums anlässlich der Techtextil Messe in Frankfurt.

Dass Mensch und Maschine im Zusammenspiel wesentlich zur Effizienzsteigerung der Produktion beitragen, verdeutlichte Dirk Zschenderlein, Leiter Intelligente Produktionssysteme, Modellierung und Prozessmanagement am Sächsischen Textilforschungsinstitut in Chemnitz in seinem Vortrag. „Automatisierung und Robotik unterstützen die Menschen bei ihrer Arbeit und werden in Zukunft noch mehr und einfacher einsetzbar sein“, so Zschenderlein.

Seit knapp fünf Jahren begleitet das Mittelstand 4.0-Kompetenzzentrum Textil vernetzt kleine und mittlere Unternehmen der Textil- und Modeindustrie, des Textilmaschinenbaus und angrenzender Branchen beim Ausbau ihrer digitalen Fitness.

Wie die textile Wertschöpfung mit Blockchain, KI und Robotik nachhaltiger, individueller und zuverlässiger werden kann, stand im Fokus der diesjährigen Fachtagung des Kompetenzzentrums anlässlich der Techtextil Messe in Frankfurt.

Dass Mensch und Maschine im Zusammenspiel wesentlich zur Effizienzsteigerung der Produktion beitragen, verdeutlichte Dirk Zschenderlein, Leiter Intelligente Produktionssysteme, Modellierung und Prozessmanagement am Sächsischen Textilforschungsinstitut in Chemnitz in seinem Vortrag. „Automatisierung und Robotik unterstützen die Menschen bei ihrer Arbeit und werden in Zukunft noch mehr und einfacher einsetzbar sein“, so Zschenderlein.

Nachhaltigkeit steht für das Kompetenzzentrum Textil vernetzt im Fokus auf dem Weg hin zu einer digitalen Wirtschaft und Gesellschaft. Wie Unternehmen die digitale Transformation gestalten, Chancen erkennen und Herausforderungen meistern, darüber diskutierten Holger Fischer von BEAS Technology und Peter Brunsberg von bagjack.

„Mut zur Veränderung ist eine Triebkraft für neue Geschäftsmodelle“, so Alexander Artschwager, verantwortlich für die Gesamtkonzeption der Digital Textile Microfactory am Schaufenster an den Deutschen Instituten für Textil- und Faserforschung, und erläuterte. wie durch Micro Factories neue Produktionsstrukturen für Nearshoring abgebildet werden können.

Source:

Mittelstand 4.0-Kompetenzzentrum Textil vernetzt

(c) Coperion GmbH
24.06.2022

Coperion: New Development for Plastic Fiber and Flake Recycling

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Source:

Coperion GmbH / Konsens Public Relations GmbH & Co. KG

(c) SPEIDEL GmbH
24.06.2022

Speidel präsentiert neue Basic-Wäscheserie

Speidel macht bei der neuen Basic-Serie „Be natural - clean & comfy cotton” keine Kompromisse. Hergestellt aus hochwertiger Bio-Baumwolle bietet die Wohlfühlwäsche Nachhaltigkeit und Komfort: Be natural begeistert mit Natur pur und ist mit einem Bio-Baumwollanteil von 93 Prozent auch GOTS zertifiziert.

Farbe Natur: nur gewaschen, nicht gebleicht oder gefärbt
Besonders nachhaltig sind alle Wäscheteile in der Farbe Natur, die nur gewaschen sind und nicht chemisch behandelt werden. Sie werden farbstofffrei und ohne optische Aufheller hergestellt – der Umwelt und den Trägerinnen zuliebe. Neben Natur gibt es die neue Serie aber auch in den Farben Weiß und Grün. Alle drei Nuancen spiegeln die Verbundenheit mit der Natur wider und erinnern an das Farbenspiel der Schwäbischen Alb.

Speidel macht bei der neuen Basic-Serie „Be natural - clean & comfy cotton” keine Kompromisse. Hergestellt aus hochwertiger Bio-Baumwolle bietet die Wohlfühlwäsche Nachhaltigkeit und Komfort: Be natural begeistert mit Natur pur und ist mit einem Bio-Baumwollanteil von 93 Prozent auch GOTS zertifiziert.

Farbe Natur: nur gewaschen, nicht gebleicht oder gefärbt
Besonders nachhaltig sind alle Wäscheteile in der Farbe Natur, die nur gewaschen sind und nicht chemisch behandelt werden. Sie werden farbstofffrei und ohne optische Aufheller hergestellt – der Umwelt und den Trägerinnen zuliebe. Neben Natur gibt es die neue Serie aber auch in den Farben Weiß und Grün. Alle drei Nuancen spiegeln die Verbundenheit mit der Natur wider und erinnern an das Farbenspiel der Schwäbischen Alb.

Liefertermin Februar 2023
Die bequem sitzenden Wäscheteile aus umweltfreundlichem und natürlichem Material – 93 Prozent Bio-Baumwolle und 7 Prozent Elasthan – begleiten wunderbar durch den Alltag. Die drei Slipformen Bikinislip, Midislip und Hipster werden durch Soft BH, Bügel BH und Schalen BH Triangle ergänzt. So findet jede Frau ihre persönlichen Lieblingsteile. Das Achselhemd rundet die Serie ab und kann auch wunderbar lässig zur Jeans oder einem Sommerrock getragen werden. Die Kollektion ist ab Februar 2023 erhältlich.

 

Source:

SPEIDEL GmbH / Panama PR GmbH

Euratex
24.06.2022

EURATEX’s ReHubs initiative: Fiber-to-fiber recycling

The ReHubs initiative brings together key European and world players to solve the European textile waste problem by transforming “waste” into a resource, and to boost textile circular business model at large scale.

This collaboration is set to turn the societal textile waste issue into a business opportunity and to fulfil the EU ambitions of the Green Deal, of the mandatory texile waste collection by end 2024 and the transition into Circular Economy.

In 2020 EURATEX launched the ReHubs initiative to promote collaboration across the extended textile value chain and considering all perspectives on chemicals, fibers making, textiles making, garments production, retail and distribution, textiles waste collection, sorting and recycling.

In June 2022 ReHubs completes a Techno Economic master Study (TES) which researches critical information on the feedstock (textile waste) data, on technology, organizational and financial needs to recycle 2.5 million tons of textile waste by 2030 and to effectively launch the ReHubs.

The ReHubs initiative brings together key European and world players to solve the European textile waste problem by transforming “waste” into a resource, and to boost textile circular business model at large scale.

This collaboration is set to turn the societal textile waste issue into a business opportunity and to fulfil the EU ambitions of the Green Deal, of the mandatory texile waste collection by end 2024 and the transition into Circular Economy.

In 2020 EURATEX launched the ReHubs initiative to promote collaboration across the extended textile value chain and considering all perspectives on chemicals, fibers making, textiles making, garments production, retail and distribution, textiles waste collection, sorting and recycling.

In June 2022 ReHubs completes a Techno Economic master Study (TES) which researches critical information on the feedstock (textile waste) data, on technology, organizational and financial needs to recycle 2.5 million tons of textile waste by 2030 and to effectively launch the ReHubs.

EURATEX’s ReHubs initiative plans to pursue fiber-to-fiber recycling for 2.5 million tons of textile waste by 2030
According ReHubs Techno Economic Master Study (TES), the textile recycling industry could generate in Europe around 15,000 direct new jobs by 2030, and increase need for nearshoring and reshoring of textile manufacturing.

The textile recycling industry in Europe could reach economic, social and environmental benefits for €3.5 billion to €4.5 billion by 2030
“Transform Waste into Feedstock” announced as first project supported by the ReHubs, and aiming at building up a first 50,000 tons capacity facility by 2024.

Europe has a 7-7.5 million tons textile waste problem, of which only 30-35% is collected today.  

Based on the ambitious European Waste law, all EU Member States must separately collect the textile waste in 2 years and half. While some countries are designing schemes to face the waste collection challenge, currently no large-scale plan exist to process the waste.

The largest source of textile waste (85%) comes from private households and approximately 99% of the textile waste was made using virgin fibers.

Euratex  assesses that to reach a fiber-to-fiber recycling rate of around 18 to 26 percent by 2030, a capital expenditure investment in the range of 6 billion € to 7 billion € will be needed, particularly to scale up sufficient sorting and processing infrastructure. The economic, social, and environmental value which could be realized, potentially total an annual impact of €3.5-4.5 billion by 2030.

Once matured and scaled, the textile recycling industry could become a profitable industry with a total market size of 6-8 billion € and around 15,000 direct new jobs by 2030.

Next steps of the ReHubs initiative

  • A European textile recycling roadmap proposing Objectives and Key Results to recycle fiber-to-fiber 2.5 million of textile waste by 2030
  • A leading collaboration hub with large players and SMEs from across an extended European textile recycling value chain
  • A first concrete portfolio of 4 launching projects:
    - Transform textile waste into feedstock
    - Increase the adoption of mechanically recycled fibers in the value chain
    - Expand capacity by solving technical challenges for thermo-mechanical textiles recycling
    - Create capsule collection with post-consumer recycled products

The 1st project addresses current sorting technologies which have limits to identify materials with sufficient accuracy for the subsequent circular recycling processes. The “Transform Waste into Feedstock” project will focus on further developing and scaling such sorting technologies. The project group led by Texaid AG aims on building up a first 50,000 tons facility by the end 2024.

Source:

Euratex

(c) VDMA
Award winners with foundation chairman and professors
23.06.2022

VDMA: Junior engineers with focus on sustainability

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

Felix Zerbes, RWTH Aachen, was awarded a Promotion Prize of 3.500 euros in the category Master. He developed a technical solution for air jet weaving to improve the quality of woven fabric.

Source:

VDMA e. V.

23.06.2022

Neonyt Fashion Show mit dem Thema "Biosphere-Technosphere" als multimediale Show

Am 23. Juni wurde das Atelier Lihotzky im Frankfurter Ostend Schauplatz einer Symbiose von Natur und Technik. Die Neonyt Fashion Show thematisierte mit „Biosphere-Technosphere“ das Zusammenspiel von Mensch und Umwelt; die Elemente Wasser, Luft und Erde im Clash mit unserer industrialisierten, digitalisierten Welt. In 31 Multibrand-Looks und einem multimedialen Runway zeigten rund 50 Brands die Zukunft der (nachhaltigen) Mode.

Der Fokus der Neonyt Fashion Show lag auf der Verbindung von Natur und ihren Elementen Wasser, Luft und Erde mit allem, was Menschen erschaffen – von Infrastruktur über Architektur, der industriellen Landwirtschaft und der digitalen Welt. Die Kombination dieser scheinbar kontroversen Themen spannte den Bogen zu unserem gegenwärtigen Erdzeitalter, dem Anthropozän, in dem der Mensch zu einem der wichtigsten Einflussfaktoren auf die biologischen, geologischen und atmosphärischen Vorgänge auf der Erde geworden ist.

Am 23. Juni wurde das Atelier Lihotzky im Frankfurter Ostend Schauplatz einer Symbiose von Natur und Technik. Die Neonyt Fashion Show thematisierte mit „Biosphere-Technosphere“ das Zusammenspiel von Mensch und Umwelt; die Elemente Wasser, Luft und Erde im Clash mit unserer industrialisierten, digitalisierten Welt. In 31 Multibrand-Looks und einem multimedialen Runway zeigten rund 50 Brands die Zukunft der (nachhaltigen) Mode.

Der Fokus der Neonyt Fashion Show lag auf der Verbindung von Natur und ihren Elementen Wasser, Luft und Erde mit allem, was Menschen erschaffen – von Infrastruktur über Architektur, der industriellen Landwirtschaft und der digitalen Welt. Die Kombination dieser scheinbar kontroversen Themen spannte den Bogen zu unserem gegenwärtigen Erdzeitalter, dem Anthropozän, in dem der Mensch zu einem der wichtigsten Einflussfaktoren auf die biologischen, geologischen und atmosphärischen Vorgänge auf der Erde geworden ist.

Neue Dimensionen und regenerative Systeme
Die Biosphäre wurde vor allem durch die Silhouetten und Strukturen in den Looks repräsentiert, wie auch durch die organischen und regenerativen Materialien, aus denen ein Großteil der Kollektionsteile gefertigt wurde. So werden auf der Neonyt Fashion Show biologisch angebaute oder nachhaltigere regenerative Materialien zugelassen, die dazu beitragen, wertvolle Ressourcen wie sauberes Wasser, Energie und Land zu schützen und damit zu einem gesunden Ökosystem beitragen.

Die Technosphäre, zu der qua Definition auch die Menschen gehören, wurde in der Inszenierung über die Verschmelzung von der digitalen Welt mit der realen Welt über große LED Screens dargestellt, auf denen digitaler Content sowie Close-ups und Überblendungen der gezeigten Looks zu sehen waren. In den Kollektionen manifestiert sich die Technosphäre in den Themen Recycling bzw. recycelte Chemiefasern, sauberer Chemikalieneinsatz oder im technischen Kreislauf des Cradle2Cradle-Konzepts. Visuell stellte sich die Technosphäre in glänzenden und reflektierenden Oberflächen dar sowie in Sportswear- und Outdoor Styles.

Insgesamt zeigten ca. 50 Brands in 31 Looks eine Bandbreite von etablierten Marken und upcoming Avantgarde Brands: Ai Komoto, Akjumii, Andy Wolf, Anna Auras, Antje Pugnat, Arys, Ayede, Catalouge of Disguise by Tanja Bombach, Céline Breton, Chika Takahashi, Clean Waves, Damur, Ecoalf, Fade Out Label, Falke, Florentina Leitner, Good Guys Don’t Wear Leather, Hell Hell Studio, KC Dubbick, Lanius, Laura Gerte, Maison Baum, Maximilian Mogg, MCM x Selassie, Muntinøus by Pino Pipoli, Myfassbender, Nat-2, Neubau, Nightboutique, PB 0110, Plas Collective, Pool Berlin, Provincia Studio, Save the Duck x Edward Crutchley, Souvenir Official x Ajobyajo, Spaccio Maglieria, Spatz Hutdesign, Timberland, Tiziano Guardini, Tizz & Tonic, Trakatan, Tribal Hotel, Trippen, Tuuli-Tytti Koivula, Uncommon Matters, Virginia Evangelista, Virón, Vitelli, Vladimir Karaleev und Wunderwerk.

Zum Publikum zählten Personen aus Wirtschaft und Politik sowie Industrie-Insider*innen aus der Mode- und Nachhaltigkeitsbranche. Einkäufer*innen, Designer*innen, Künstler*innen waren gleichermaßen anwesend wie (inter-)nationale Fachpresse, Tageszeitungen, Modezeitschriften, Content Creator*innen, TV und Hörfunk. Auch waren Aktivist*innen von Fashion Revolution und Vertreter*innen des Fashion Impact Fund vor Ort.

Source:

Messe Frankfurt Exhibition GmbH

22.06.2022

Avgol® wins Innovation Award at the RIGHT Hygiene conference

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

Source:

Avgol

22.06.2022

Nominations Open for RISE® Innovation Award

INDA, the Association of the Nonwoven Fabrics Industry, has announced the nomination process is now open for the annual RISE® Innovation Award. The prestigious award will be presented at the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference – September 27-28, 2022, at North Carolina State University, Raleigh, NC.  RISE® 2022 is a two-day conference presenting insightful research and science that propels product development.

Companies, academic institutions, research centers, and individuals are invited to nominate their advances in nonwovens and engineered materials at https://www.riseconf.net/award-submission.html until the July 15, 2022 deadline.

INDA, the Association of the Nonwoven Fabrics Industry, has announced the nomination process is now open for the annual RISE® Innovation Award. The prestigious award will be presented at the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference – September 27-28, 2022, at North Carolina State University, Raleigh, NC.  RISE® 2022 is a two-day conference presenting insightful research and science that propels product development.

Companies, academic institutions, research centers, and individuals are invited to nominate their advances in nonwovens and engineered materials at https://www.riseconf.net/award-submission.html until the July 15, 2022 deadline.

The RISE® Innovation Award recognizes innovation within and on the periphery of the nonwovens industry that uses revolutionary science and engineering principles to solve current and future industry needs. Raw material advances, advances in process or manufacturing technologies including web forming and converting, new product or application development, and other areas that may extend or enhance the use of nonwovens will be considered for nominations.

Industry professionals involved with product development, material science, and disruptive enabling technologies for both consumer and industrial products are encouraged to nominate their product(s) for the RISE® Innovation Award.

Nomination Process
Technical experts serving on the INDA Technical Advisory Board will review nominations and select three finalists who exemplify the use of cutting-edge science and engineering principles to advance the field of nonwovens. Finalists will present their innovations to technology scouts, scientists, researchers, and next level industry professionals at the RISE® Conference on Tuesday, Sept. 27, 2022.

Criteria and eligibility, nomination process timing, and prior award recipient information is available online: https://www.riseconf.net/award-submission.html

More information:
INDA nonwovens RISE®
Source:

INDA

22.06.2022

GOTS Standard revision process enters next phase

The ongoing revision process to the GOTS Standard document and supporting Manual for Implementation garnered a robust response during its first public comment period, which ended on June 13 and elicited over 300 inputs. Of that, about 60 percent of comments were related to technical criteria such as ecology, chemical inputs, and material quality; and around 30 percent concerned GOTS social criteria. The Standard sets forth the requirements for organic textiles throughout the entire processing chain. GOTS’s commitment to making every version stronger ensures that the Standard continues to be a dynamic and evolving document and remain at the forefront as the most recognized and respected global standard for textiles.

The first draft of the revised standard, GOTS version 7.0, was made available for an initial 60-day comment period. Stakeholders, associations, organisations, companies and individuals were encouraged to contribute to the revision of the Standard during this timeframe. The Standard is updated every three years, ensuring that GOTS keeps up with advances in the industry and developments in the science and technology of textile processing.

The ongoing revision process to the GOTS Standard document and supporting Manual for Implementation garnered a robust response during its first public comment period, which ended on June 13 and elicited over 300 inputs. Of that, about 60 percent of comments were related to technical criteria such as ecology, chemical inputs, and material quality; and around 30 percent concerned GOTS social criteria. The Standard sets forth the requirements for organic textiles throughout the entire processing chain. GOTS’s commitment to making every version stronger ensures that the Standard continues to be a dynamic and evolving document and remain at the forefront as the most recognized and respected global standard for textiles.

The first draft of the revised standard, GOTS version 7.0, was made available for an initial 60-day comment period. Stakeholders, associations, organisations, companies and individuals were encouraged to contribute to the revision of the Standard during this timeframe. The Standard is updated every three years, ensuring that GOTS keeps up with advances in the industry and developments in the science and technology of textile processing.

Beginning in 2022, the GOTS revision process is following a newly developed and more inclusive Standard Setting Procedure, which includes oversight of the process by a Standard Revision Committee (SRC). The SRC consists of experts from different stakeholder groups, including scientists, textile industry professionals, sustainability, sourcing and human rights specialists and others. Members work together throughout the entire revision process to establish terms of reference and make decisions on any changes.

The comments received are being compiled and will be available for viewing on the GOTS website shortly. For the next stage of the revision process, the SRC will deliberate all comments, and a second draft of the revision will be released for a second and final 30-day period of public input in September 2022, which will be announced on the GOTS website and social media. The final version of the revised standard, GOTS version 7.0 will be released in March 2023, and will come into effect one year later.

More information:
GOTS revision
Source:

GOTS

22.06.2022

Anmeldestart zur Abschlussveranstaltung von DiTex

19. / 20. Oktober 2022, Berlin, Hotel Aquino

Das vom BMBF geförderte Vorhaben „DiTex – Digitale Technologien als Enabler einer ressourceneffizienten kreislauffähigen B2B-Textilwirtschaft“ hat recyclingfähige Leasing-Berufsbekleidung und -Bettwäsche entwickelt, in der Praxis erprobt und ihre Ressourceneffizienz und Eignung bewertet. Die Abschlussveranstaltung „Auf dem Weg zu einer zirkulären Textilwirtschaft – Produkte, Geschäftsmodelle und digitale Strategien“ findet am 20. Oktober 2022 in Berlin statt.

Vorgestellt werden zirkuläre Produktdesigns für Großabnehmer und wie Anforderungen an Komfort, Langlebigkeit und Nachhaltigkeit gebündelt werden können.
Diskutiert werden drei Schwerpunktthemen:

19. / 20. Oktober 2022, Berlin, Hotel Aquino

Das vom BMBF geförderte Vorhaben „DiTex – Digitale Technologien als Enabler einer ressourceneffizienten kreislauffähigen B2B-Textilwirtschaft“ hat recyclingfähige Leasing-Berufsbekleidung und -Bettwäsche entwickelt, in der Praxis erprobt und ihre Ressourceneffizienz und Eignung bewertet. Die Abschlussveranstaltung „Auf dem Weg zu einer zirkulären Textilwirtschaft – Produkte, Geschäftsmodelle und digitale Strategien“ findet am 20. Oktober 2022 in Berlin statt.

Vorgestellt werden zirkuläre Produktdesigns für Großabnehmer und wie Anforderungen an Komfort, Langlebigkeit und Nachhaltigkeit gebündelt werden können.
Diskutiert werden drei Schwerpunktthemen:

  • Wie können digitale Strategien sinnvoll für Kreislaufführung und ressourceneffiziente Nutzung von Miettextilien eingesetzt werden?
  • Welche Chancen für verbesserte Ressourcennutzung bietet Textilrecycling?
  • Wie kann das Geschäftsmodell des Textilleasings zu einer textilen Kreislaufwirtschaft beitragen?

Am Vorabend der Konferenz, am 19. Oktober 2022, besteht die Gelegenheit, sich bei einem Get-Together ab 18 Uhr mit anderen Teilnehmenden und Projektbeteiligten auszutauschen.

Eine Anmeldemöglichkeit besteht bis zum 19.08.2022.

Source:

Institut für ökologische Wirtschaftsforschung (IÖW) GmbH

22.06.2022

Autoneum publishes Corporate Responsibility Report 2021

  • Joining Science Based Targets initiative

ith its Advance Sustainability Strategy 2025 launched in 2018, Autoneum defined ambitious goals in the areas of environment, society and governance. In the past year, significant quantitative and qualitative improvements were achieved, as shown in the Corporate Responsibility Report 2021 published today. For example, CO2 emissions were reduced in 2021 and the proportion of reused production scrap (recycling) was significantly increased.

  • Joining Science Based Targets initiative

ith its Advance Sustainability Strategy 2025 launched in 2018, Autoneum defined ambitious goals in the areas of environment, society and governance. In the past year, significant quantitative and qualitative improvements were achieved, as shown in the Corporate Responsibility Report 2021 published today. For example, CO2 emissions were reduced in 2021 and the proportion of reused production scrap (recycling) was significantly increased.

Following Autoneum’s decision last year to extend its environmental targets with quantifiable targets for all direct and indirect greenhouse gas emissions and a time horizon to 2027, the Company has recently signed the declaration to join the Science Based Targets initiative (SBTi). Autoneum acknowledges the urgent need for action and will submit its ambitious, science-based targets to the SBTi to reduce CO2 emissions in the near term. In addition, Autoneum is reporting its Scope 3 emissions in full for the first time. In line with the strategic goal of continuously reducing electricity purchases from fossil fuels and replacing them with renewable energies, ten plants worldwide were converted to renewable energies in 2021.

In the past year, Autoneum again implemented a large number of projects in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management”: 29 eco-efficiency projects with a focus on materials efficiency and recycling contributed to more environmentally friendly production and correspondingly more sustainable components worldwide. The result was a significant reduction in waste and a further optimization of processes for a range of products. Moreover, new eco-efficient products were successfully launched on the market.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2021.

Source:

Autoneum Management AG

(c) Matthias Leo / Hochschule Augsburg
21.06.2022

Recycling Atelier in Augsburg eröffnet

  • ITA Augsburg und Hochschule Augsburg setzen Modellfabrik zum nachhaltigen Stoffkreislauf im Rahmen des KI-Produktionsnetzwerks Augsburg um

Nur ein Prozent der Textilien wird aktuell im weltweiten Stoffkreislauf recycelt. Schnelllebige Modetrends, die ausgelagerte Unternehmensverantwortung und eine allgemein sinkende Rohstoffqualität befeuern diese Entwicklung. Das Recycling Atelier, das die Hochschule Augsburg und das Institut für Textiltechnik Augsburg (ITA Augsburg) eröffnet haben, stellt sich diesem Trend entgegen.

Das Recycling Atelier ist die erste Modellfabrik, die sich in Forschung und Entwicklung gemeinsam mit Partnern aus der Industrie dem nachhaltigen Stoffkreislauf entlang der kompletten textilen Produktionskette widmet.

  • ITA Augsburg und Hochschule Augsburg setzen Modellfabrik zum nachhaltigen Stoffkreislauf im Rahmen des KI-Produktionsnetzwerks Augsburg um

Nur ein Prozent der Textilien wird aktuell im weltweiten Stoffkreislauf recycelt. Schnelllebige Modetrends, die ausgelagerte Unternehmensverantwortung und eine allgemein sinkende Rohstoffqualität befeuern diese Entwicklung. Das Recycling Atelier, das die Hochschule Augsburg und das Institut für Textiltechnik Augsburg (ITA Augsburg) eröffnet haben, stellt sich diesem Trend entgegen.

Das Recycling Atelier ist die erste Modellfabrik, die sich in Forschung und Entwicklung gemeinsam mit Partnern aus der Industrie dem nachhaltigen Stoffkreislauf entlang der kompletten textilen Produktionskette widmet.

Das Recycling Atelier bietet als erste Modellfabrik ein weltweit bisher einzigartiges Konzept für ein ganzheitliches Recycling von Textilien an. Die Wissenschaftler:innen von ITA und Hochschule forschen dort an sämtlichen Prozessschritten des Textilrecyclings: von der Materialanalyse, über die Sortierung, die Aufbereitung und die textile Verarbeitung, bis hin zur Produktgestaltung. Sie betreiben die Prozesse zunächst modellhaft mit dem Fokus auf einer sinnhaften Produktion, bevor dann die Skalierung auf einen industriellen Produktionsmaßstab erfolgt.

Die Schwerpunkte des Recycling Ateliers liegen auf der Entwicklung neuer Produkte und Prozesse für textile Sekundärrohstoffe und der Erarbeitung von Konzepten für das vollständige Verwerten von Alttextilien mit bestmöglicher Qualität sowohl durch integriertes und hochwertiges Recycling als auch durch kreislauforientiertes Produktdesign. Die Ergebnisse münden letztendlich im industriellen Einsatz von Recyclingkonzepten und schlagen die Brücke hin zu aktuellen Geschäftsmodellen.

Bei jedem Prozessschritt unterstützen Unternehmen aus der gesamten Wertschöpfungskette die Forschung und bringen die industrielle Sichtweise und Kompetenz ein. In einem großen Workshop-Areal bietet das Recycling Atelier in Kooperation mit internationalen Unternehmen die Möglichkeit, die Produkte der Firmen auf den Prüfstand zu stellen und im direkten Austausch neue Konzepte für eine nachhaltige Textilproduktion zu erarbeiten.

Der Augenmerk liegt vor allem auf dem Bereich der Digitalisierung: Durch eine hochwertige und moderne Erfassung, Aufbereitung und Auswertung von Daten sollen neue Produktionsprozesse ermöglicht werden. Dabei wird der Einsatz von Künstlicher Intelligenz im Bereich des maschinellen Lernens und der Neuronalen Netze für die Textilbranche erforscht.

Das Recycling Atelier ist ein Beitrag der Hochschule Augsburg und des ITA Augsburg zum KI-Produktionsnetzwerk Augsburg. Das KI-Produktionsnetzwerk Augsburg, eingerichtet von der Bayerischen Landesregierung, ist ein Verbund von zahlreichen KI-Kompetenzträgern im Großraum Augsburg. Verbundpartner sind die Universität Augsburg, das Fraunhofer-Institut für Gießerei-, Composite- und Verarbeitungstechnik IGCV, das Zentrum für Leichtbauproduktionstechnologie (ZLP) des Deutschen Zentrums für Luft- und Raumfahrt (DLR) in Augsburg sowie die Hochschule Augsburg. Beteiligt sind zudem auch regionale Industriepartner. Ziel ist eine gemeinsame Erforschung KI-basierter Produktionstechnologien an der Schnittstelle zwischen Werkstoffen, Fertigungstechnologien, datenbasierter Modellierung und digitalen Geschäftsmodellen.

Source:

Hochschule Augsburg/ITA Augsburg

Foto: Green Workwear GmbH
Pflege-Chino aus der SOUL Serie
21.06.2022

Green Workwear: Nachhaltige Pflegebekleidung

Nachhaltige Produktion und nachhaltige Gewebe - so präsentiert Green Workwear seine nachhaltige Pflegebekleidung, die die Anforderungen an industrielle Wäsche, lange Lebensdauer und ein überzeugendes Preis-Leistungsverhältnis verbinden kann.

Neben den hochwertigen Geweben wurden die Produkte des Unternehmens auch unter sozial nachhaltigen Aspekten produziert. Alle Modelle sind nach dem „Grünen Knopf“ und „ÖkoTex Made in Green“ zertifiziert. Die gesamte Lieferkette kann transparent über einen QR Code im Artikel nachverfolgt werden. Zusätzlich wird der gesamte Transportweg bis nach Deutschland CO2-kompensiert.

„Unser Leitgedanke bei Green Workwear: Wir übernehmen Verantwortung für die Umwelt und alle handelnden Personen in der Lieferkette“ so Harald Reisinger, einer der Geschäftsführer der Green Workwear GmbH.

Nachhaltige Produktion und nachhaltige Gewebe - so präsentiert Green Workwear seine nachhaltige Pflegebekleidung, die die Anforderungen an industrielle Wäsche, lange Lebensdauer und ein überzeugendes Preis-Leistungsverhältnis verbinden kann.

Neben den hochwertigen Geweben wurden die Produkte des Unternehmens auch unter sozial nachhaltigen Aspekten produziert. Alle Modelle sind nach dem „Grünen Knopf“ und „ÖkoTex Made in Green“ zertifiziert. Die gesamte Lieferkette kann transparent über einen QR Code im Artikel nachverfolgt werden. Zusätzlich wird der gesamte Transportweg bis nach Deutschland CO2-kompensiert.

„Unser Leitgedanke bei Green Workwear: Wir übernehmen Verantwortung für die Umwelt und alle handelnden Personen in der Lieferkette“ so Harald Reisinger, einer der Geschäftsführer der Green Workwear GmbH.

Source:

Green Workwear GmbH

21.06.2022

First comprehensive sustainable chemistry index for the textile industry

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

The sustainable chemistry index will be reserved for substances that offer transparency on a number of additional indicators including the chemical’s circularity viability, greenhouse gas emissions during production, and the source of the raw materials. The sustainable chemistry index will also require that the downstream use of the chemical is optimized, meaning, for example, that it promotes resource saving in textile finishing. Additionally, excellent corporate governance paired with well-defined environmental and social (ESG) goals will be a pre-condition.

SCTITM is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Bluesign will implement and manage the sustainable chemistry index as an independent authority with a holistic approach to helping companies throughout the textile supply chain improve their sustainability performance.

21.06.2022

RUDOLF celebrates its 100th birthday at TECHTEXTIL

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

PRISTINE® - Hygiene and freshness from continuous R&D advances. RUDOLF’s new ingredient brand that groups all high-performing technologies for textile hygiene, protection and freshness.

BIONIC FINISH® ECO - An idea borrowed from Mother Nature. Based on proprietary dendrimer technology, RUDOLF presents an extended family of unique fluorine-free DWR formulations suited for different materials and designed for different applications and needs.

New system solution
ECO-LOGIC® - Two-steps process designed and managed by RUDOLF’s specialists in textile process chemistry. It simulates, analyses and measures the environmental impact of a given industrial textile process to then provide insights into the optimization of resources, costs and CO2 emissions..

Source:

RUDOLF GmbH

Graphic: RadiciGroup
20.06.2022

RadiciGroup at Techtextil with innovative textile solutions

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

 

Source:

RadiciGroup

20.06.2022

Beaulieu Fibres International at Techtextil 22

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

Beaulieu Fibres International will offer ISCC Plus (International Sustainability and Carbon Certification Plus) certified bio circular MONO-PP and BICO PP/PE fibres in 1,3-8,9 dtex, available with all the main available finish classes. These drop-in solutions, with no loss in quality, will support customers reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications, contributing to the transition towards a circular economy.

Source:

Beaulieu Fibres International

20.06.2022

Suominen strengthens its capabilities in sustainable products

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

More information:
Suominen Sustainability nonwovens
Source:

Suominen

Photo: Stora Enso
20.06.2022

Infinited Fiber Company: Commercial-scale factory to produce regenerated textile fiber

  • Finnish fashion and textile technology company Infinited Fiber Company plans to build its first commercial-scale Infinna™ fiber factory at Stora Enso’s Veitsiluoto industrial site in the city of Kemi in Finland’s northernmost region of Lapland. Infinited Fiber Company plans to convert a building currently housing a discontinued paper production line.
  • The size of Infinited Fiber Company’s planned investment is around EUR 400 million.
  • The planned factory is expected to create around 270 jobs at the Veitsiluoto industrial site.
  • The factory is expected to operate at full capacity in 2025.

Fashion and textile technology company Infinited Fiber Company plans to build a commercial-scale factory to produce regenerated textile fiber for the world’s leading apparel companies at the site of renewable materials company Stora Enso’s closed Veitsiluoto paper mill in Kemi, a Finnish city on the northern shore of the Baltic Sea. The size of the investment is estimated at EUR 400 million, and it is expected to create around 270 jobs in the area.

  • Finnish fashion and textile technology company Infinited Fiber Company plans to build its first commercial-scale Infinna™ fiber factory at Stora Enso’s Veitsiluoto industrial site in the city of Kemi in Finland’s northernmost region of Lapland. Infinited Fiber Company plans to convert a building currently housing a discontinued paper production line.
  • The size of Infinited Fiber Company’s planned investment is around EUR 400 million.
  • The planned factory is expected to create around 270 jobs at the Veitsiluoto industrial site.
  • The factory is expected to operate at full capacity in 2025.

Fashion and textile technology company Infinited Fiber Company plans to build a commercial-scale factory to produce regenerated textile fiber for the world’s leading apparel companies at the site of renewable materials company Stora Enso’s closed Veitsiluoto paper mill in Kemi, a Finnish city on the northern shore of the Baltic Sea. The size of the investment is estimated at EUR 400 million, and it is expected to create around 270 jobs in the area. The annual fiber production capacity of the planned factory is expected to be 30,000 metric tons, which is equivalent to the fiber needed for about 100 million T-shirts.  

Infinited Fiber Company’s technology enables cotton-rich textile waste to be transformed into a versatile, high-quality regenerated textile fiber called Infinna™, which looks and feels like cotton. Major international fashion and apparel companies – including Zara’s parent company Inditex, PVH Europe, which is known for the Tommy Hilfiger brand, Patagonia, PANGAIA, H&M Group and BESTSELLER – have already committed to Infinna™ purchases through multi-year agreements as they look for materials that enable the industry to shift towards circularity. Infinited Fiber Company expects to export most of the output of its planned factory. This makes Kemi an ideal location as the city’s port serves as an efficient link to the rest of the world.

Infinited Fiber Company will convert a building housing a discontinued paper production line into an Infinna™ fiber factory. Both the factory engineering and project implementation as well as the related financing negotiations were commenced at the beginning of the year and are progressing well. Infinited Fiber Company has also agreed on the provision of energy and water related services with utility infrastructure company Nevel.

Once up and running, the factory is expected to provide direct employment for around 220 people, and for a further 50 through on-site support functions such as services, maintenance, and logistics. The additional indirect employment impact is estimated to be around 800 jobs. The construction and installation phase is expected to create jobs equaling around 120 person-years. The factory is anticipated to operate at full capacity in 2025.

Source:

Infinited Fiber Company

Graphic DNFI
19.06.2022

DNFI Innovation in Natural Fibres Award Ceremony During Heimtextil

Natural fibers are among the most important raw materials in the textile and fashion industry worldwide. For centuries, they have fed millions of people through their cultivation or breeding, and it is impossible to imagine daily life without them. Especially at the moment, natural fibers are gaining special importance due to the intense discussions about sustainable living. Even though natural fibers have accompanied mankind for a long time, they are changeable, technical, and adaptable to the challenges of the textile industry.

The Discover Natural Fibres Initiative (DNFI) is celebrating natural fibres in a program to be conducted during Heimtextil in Frankfurt on 23 June. Anyone with an interest in the role of natural fibres in the world economy, economic indicators of textile activity, innovations in natural fibre research, and updates on proposed EU legislation affecting textiles is welcome to attend.

The program will include various presentations by the previous and current award winners, presentations, and discussions:

Overview of world natural fibre production, employment, and value,

Natural fibers are among the most important raw materials in the textile and fashion industry worldwide. For centuries, they have fed millions of people through their cultivation or breeding, and it is impossible to imagine daily life without them. Especially at the moment, natural fibers are gaining special importance due to the intense discussions about sustainable living. Even though natural fibers have accompanied mankind for a long time, they are changeable, technical, and adaptable to the challenges of the textile industry.

The Discover Natural Fibres Initiative (DNFI) is celebrating natural fibres in a program to be conducted during Heimtextil in Frankfurt on 23 June. Anyone with an interest in the role of natural fibres in the world economy, economic indicators of textile activity, innovations in natural fibre research, and updates on proposed EU legislation affecting textiles is welcome to attend.

The program will include various presentations by the previous and current award winners, presentations, and discussions:

Overview of world natural fibre production, employment, and value,

  • Economic indicators and impacts of coronavirus on textile industries,
  • Updates on innovative uses of natural fibres:
  • Use of wool in automobile insulation applications for enhanced sustainability,
  • Using cellulose from cotton to produce a biodegradable plastic substitute,
  • Manufacturing waterproof fabric from a blend of cotton and jute as sustainable
  • Substitute for polypropylene tarps
  • Proposed EU textile legislation and potential impacts on natural fibres
More information:
DNFI DNFI award Heimtextil
Source:

DNFI