From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
449 results
drop of orders (c) ACIMIT
26.07.2023

Italian Textile Machinery: 2nd Q 2023 Drop in Order Intake

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

More information:
ACIMIT orders index
Source:

ACIMIT

print close
more
24.07.2023

Rieter in first Half of 2023: Increase in sales, decrease in orders

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

On June 30, 2023, the company had a high order backlog of around CHF 1 100 million (June 30, 2022: around CHF 2 100 million). This therefore extends into the year 2024. As in the previous year, cancellations in the reporting period were around 5% of the order backlog, also impacted by the effects of the severe earthquake in Türkiye.

In the first half of 2023, Rieter posted a profit of CHF 25.2 million at the EBIT level, with an EBIT margin of 3.3% (first half of 2022: loss of CHF -10.2 million) and a net profit of CHF 13.3 million (first half of 2022: loss of CHF -25.2 million).

“Next Level” performance program planned
The challenging market situation over the past two years was marked by severe disruptions in the global supply chain in conjunction with rising material, energy, labor, and production costs. The current global demand for textile products remains at a low level. To increase long-term value for customers, employees, and shareholders, Rieter, as technology leader, is planning a performance program called “Next Level”. The goal of the program is to strengthen sales excellence, sharpen customer focus, improve cost efficiency in production and optimize fixed cost structures. The one-time cost of the program is anticipated to be around CHF 45 to 50 million, which will have an impact on the second half of 2023. Most of the program initiatives will be implemented before the end of 2023 with a view to achieving an expected impact from as early as 2024. With these measures Rieter is aiming to reduce operating costs by some CHF 80 million per year.

The program includes provisions for the net reduction of around 300 positions throughout the Group in relation to overhead functions. The possibility of further market- and volume-related adjustments in the order of 400 to 600 positions cannot be excluded. At the end of June 2023, Rieter had a global workforce of 5 555 employees.

Outlook
Given the economic situation and the ongoing cyclical market weakness, Rieter continues to expect below-average demand for new equipment in the coming months. A revival is not expected until the fourth quarter of 2023 at the earliest. Rieter also believes that demand for consumables, wear & tear and spare parts will not recover until later in 2023.

For the full year 2023, Rieter expects an EBIT margin of around 5 to 7% (including positive special effects of less than 2%) and sales at the previous year’s level of around CHF 1.5 billion.

More information:
Rieter Holding AG half-year results
Source:

Rieter Management AG

print close
more
The Mimaki TxF150-75
21.07.2023

Digital Textile Printing: Direct-to-Film Technology

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

Direct-to-film vs. Screen Printing
Direct-to-film printing is the process of digitally printing directly onto a special transfer film sheet. The printed film is subsequently sprinkled with a hot-melt powder and heated. Once the transfer sheet is cured and dried, it can be heat-pressed onto a variety of fabrics to create premium transferred designs for customised merchandising, sportswear, and an array of other promotional applications for the textile market. Compared with traditional screen printing, the plate creation required for that process is far too time-consuming. Not only this, but it does not match direct-to-film’s ability to produce vivid colours and quality details such as shapes, lettering, and motifs often sought after in the promotional and merchandising space for bespoke textiles.

The Mimaki TxF150-75
Mimaki’s first direct-to-film inkjet printer is the TxF150-75, a fitting extension to the 150 series, with a maximum printing width of 80cm. Offering a stable printing plotter, the model’s built-in ink circulation system and degassed ink pack are resolutions to common direct-to-film challenges such as poor ink ejection and white ink clogging. The new printer also includes core Mimaki features including NCU (Nozzle Check Unit) and NRS (Nozzle Recovery System) for stable, uninterrupted print production. Operating in harmony with the textile printer itself is Mimaki’s ECO PASSPORT by OEKO-TEX® certified water-based pigment textile inks, formulated especially for the TxF150-75. Coupled with Mimaki’s RasterLink7 RIP software, users are offered end-to-end oversight and efficiency from creative design to final product.

In addition, and in line with Mimaki’s collaborative approach to meeting customer needs, Adkins has developed an 80cm wide powder shaker cure unit to complete this ‘A brand’ direct-to-film printing solution. By offering the printer and post-processing unit at 80cm wide, customers can print larger garments with less waste and quicker production times, making the process much more cost effective.

More information:
Mimaki textile printing digital printing digital printing machines Direct-to-Film
Source:

Mimaki Europe B.V.

print close
more
21.07.2023

Rieter im 1. Halbjahr 2023: gestiegener Umsatz, gesunkener Bestelleingang

Im ersten Halbjahr 2023 verzeichnete Rieter eine deutliche Umsatzsteigerung von 22.2% auf 758.2 Mio. CHF, trotz einiger Stornierungen bzw. Verschiebungen von Auslieferungen als Folge des Erdbebens in der Türkei. Zyklische Marktabschwächungen in den einzelnen Marktsegmenten, die sich bereits im zweiten Halbjahr 2022 abzeichneten, führten im Berichtszeitraum zu einem im Vorjahresvergleich tieferen Bestellungseingang von 325.0 Mio. CHF (-62.6%). Damit hat sich die Nachfrage gegenüber dem hohen Wert der Vorjahresperiode wie erwartet deutlich abgeschwächt.

Der Bestellungseingang war in fast allen Regionen von Investitionszurückhaltung bei den Neumaschinen gekennzeichnet. Lediglich in China stiegen die Bestellungseingänge aufgrund von Investitionen der Spinnereien in die Verbesserung ihrer lokalen Wettbewerbsfähigkeit. Zudem haben einige Kunden anstehende Investitionsentscheide zurückgehalten und die Innovationen abgewartet, die auf der ITMA in Mailand im Juni 2023 präsentiert wurden. Gleichzeitig ging die Nachfrage nach Verbrauchs-, Verschleiß- und Ersatzteilen aufgrund der globalen Marktabschwächung zurück.

Im ersten Halbjahr 2023 verzeichnete Rieter eine deutliche Umsatzsteigerung von 22.2% auf 758.2 Mio. CHF, trotz einiger Stornierungen bzw. Verschiebungen von Auslieferungen als Folge des Erdbebens in der Türkei. Zyklische Marktabschwächungen in den einzelnen Marktsegmenten, die sich bereits im zweiten Halbjahr 2022 abzeichneten, führten im Berichtszeitraum zu einem im Vorjahresvergleich tieferen Bestellungseingang von 325.0 Mio. CHF (-62.6%). Damit hat sich die Nachfrage gegenüber dem hohen Wert der Vorjahresperiode wie erwartet deutlich abgeschwächt.

Der Bestellungseingang war in fast allen Regionen von Investitionszurückhaltung bei den Neumaschinen gekennzeichnet. Lediglich in China stiegen die Bestellungseingänge aufgrund von Investitionen der Spinnereien in die Verbesserung ihrer lokalen Wettbewerbsfähigkeit. Zudem haben einige Kunden anstehende Investitionsentscheide zurückgehalten und die Innovationen abgewartet, die auf der ITMA in Mailand im Juni 2023 präsentiert wurden. Gleichzeitig ging die Nachfrage nach Verbrauchs-, Verschleiß- und Ersatzteilen aufgrund der globalen Marktabschwächung zurück.

Das Unternehmen verfügte per 30. Juni 2023 über einen hohen Bestellungsbestand von rund 1 100 Mio. CHF (30. Juni 2022: rund 2 100 Mio. CHF). Dieser reicht somit bis ins Jahr 2024. Wie im Vorjahr lagen die Stornierungen in der Berichtsperiode bei rund 5% des Bestellungsbestandes, ebenfalls beeinflusst durch die Auswirkungen des schweren Erdbebens in der Türkei.

Rieter verbuchte im ersten Halbjahr 2023 auf Stufe EBIT einen Gewinn von 25.2 Mio. CHF gegenüber einem Verlust von -10.2 Mio. CHF im Vorjahreszeitraum. Dieses positive Resultat hängt mit dem gestiegenen Umsatz und dem gleichzeitig höheren Bruttogewinn in Prozent des Umsatzes von 23.9% (1. Halbjahr 2022: 21.0%) zusammen.

Performance-Programm „Next Level“: Stellenabbau und Verbesserung der Kosteneffizienz
Die herausfordernde Marktsituation in den letzten zwei Jahren war durch schwerwiegende Unterbrechungen der globalen Lieferkette mit steigenden Material-, Energie-, Arbeits- und Produktionskosten gekennzeichnet. Die derzeitige weltweite Nachfrage nach Textilprodukten bleibt auf niedrigem Niveau.
Der Konzern plant ein Performance-Programm „Next Level“, mit dem Ziel, die Vertriebskompetenz und Kundennähe zu stärken, die Kosteneffizienz in der Produktion zu verbessern und die Fixkostenstrukturen zu optimieren. Rieter will mit diesen Maßnahmen die Basis schaffen, um agiler auf das zyklische Maschinengeschäft reagieren zu können. Für die in diesem Zusammenhang geplanten Initiativen werden im zweiten Halbjahr 2023 einmalige Restrukturierungskosten von rund 45 bis 50 Mio. CHF erwartet.

Der größte Teil der Programminitiativen soll noch im Jahr 2023 umgesetzt werden, um eine erwartete Wirkung bereits ab 2024 zu erzielen. Rieter strebt mit diesen Maßnahmen eine Senkung der laufenden Kosten von rund 80 Mio. CHF pro Jahr an.

Das Programm sieht unter anderem den Abbau von konzernweit rund 300 Stellen in Overhead-Funktionen vor. Weitere markt- und volumenbedingte Anpassungen in der Größenordnung von 400 bis 600 Stellen können nicht ausgeschlossen werden. Per Ende Juni 2023 beschäftigte Rieter weltweit 5 555 Mitarbeitende.
Die Konsultationsprozesse mit den Arbeitnehmervertretungen sollen zeitnah beginnen.

Ausblick
Für die kommenden Monate geht Rieter angesichts der wirtschaftlichen Rahmen¬bedingungen und der anhaltenden zyklischen Marktschwäche weiter von einer unterdurchschnittlichen Nachfrage nach neuen Anlagen aus. Eine Belebung wird frühestens im vierten Quartal 2023 erwartet. Auch die Nachfrage nach Verbrauchs-, Verschleiß- und Ersatzteilen wird sich nach Einschätzung von Rieter erst später im Jahr 2023 erholen.

Rieter erwartet für das Gesamtjahr 2023 eine EBIT-Marge von rund 5 bis 7% (inklusive positiven Sondereffekten von weniger als 2%) und einen Umsatz auf Vorjahresniveau von rund 1.5 Mrd. CHF.

More information:
Rieter Holding AG Halbjahresergebnis
Source:

Rieter Management AG

print close
more
20.07.2023

VDMA Textile Machinery: Planned PFAS ban threatens important textile machine components

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

Solid PFAS parts are widely used in textile machinery production, especially where extreme conditions prevail. Verena Thies, Managing Shareholder Thies GmbH & Co. KG, explains: “Our textile dyeing machines are world leaders and set standards in efficiency and sustainability. They work under pressure at temperatures of up to 140° C using highly acidic, highly basic and/or oxidative or even reductive chemicals. This is precisely why PFAS is needed, for example, in seals and rings, flaps as well as valves for a long-lasting and high-quality machine concept – because there are no alternatives with qualitatively equivalent properties. In addition, PTFE semi-finished products enable a sliding and gentle contact with the textile fabric in ecologically important techniques in the transformation of textile wet finishing."

PTFE and also FKM are fluoropolymers (fluoroplastics and fluoroelastomers), a group within the broad PFAS range of about 10,000 substances which would be banned for production, use and sale in the EU. They are high-tech materials, and as so-called "polymers of low concern" are not a danger to the environment, according to the OECD. Furthermore, these components are installed inside a machine and exchanged or disposed of properly. PFAS such as PTFE and FKM must be exempted from the ban, demands the VDMA in its position paper.

"In this way, the association also supports the approach taken in Great Britain. With the 10,000 substances, everything is lumped together, although the various PFAS groups are very different," warns Dr Sarah Brückner, Head of VDMA Environmental Affairs and Sustainability. "We should take our cue from the UK and look at the substance groups in a differentiated way."
Apart from several types of dyeing machines, PFAS components are indispensable in textile drying machines (e.g., conveyor dryers, tumblers and stenters) and damping machines. They are also used in fully automatic chemical dispensing systems and pressure vessels for thermochemical treatment of textile recycling material, heat recovery systems and wastewater treatment technology. This means that a lot of machines needed for a sustainable textile production would be affected by the PFAS ban.

VDMA Textile Machinery will take part in the ongoing EU public consultation. The association will describe indispensable key functionalities and conditions of use in the textile machinery sector as well as the consequences for the companies and the customers in the EU if the ban is imposed. The consultation ends on September 25, 2023, and VDMA urged its members affected by the planned restriction to participate in the consultation at an early stage. This is the only way to ensure that the broad scope of the mechanical and plant engineering sector is represented.

More information:
VDMA Textilmaschinen PFAS
Source:

VDMA e. V.
Textile Machinery

 

print close
more
(c) Baldwin Technology Company Inc.
13.07.2023

Baldwin releases latest PrintEnomic$ eBook

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – Baldwin explores four trends in the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook:

  • The resurgence in book publishing
  • Labor challenges
  • Direct mail marketing as a cure for screen fatigue
  • Sustainability
More information:
Baldwin Technology Company Inc. textile printing
Source:

Baldwin Technology Company Inc.

print close
more
adidas celebrates next Gen Icons of the Game (c) adidas AG
Lena Oberdorf, Mary Fowler and Alessia Russo
12.07.2023

adidas celebrates next Gen Icons of the Game

adidas unveils its new campaign to celebrate the FIFA Women’s World Cup Australia & New Zealand 2023™. The campaign is dedicated to next gen icons Alessia Russo, Lena Oberdorf and Mary Fowler and looks to drive more global attention for the game and inspire other young women and girls to follow in their footsteps.

Marking adidas’ most impactful Women’s World Cup campaign to date, the brand unites its global family of football legends and advocates of the women’s game. Headlined by a series of fast-paced films, the campaign welcomes a star-studded line up of David Beckham, Leon Goretzka and Ian Wright, actor and football fan, Jenna Ortega, as well as Argentina’s World Cup hero, Lionel Messi. They come together to celebrate the skills that Russo, Oberdorf and Fowler are renowned for, from vision and interception to power, creativity and accuracy.

adidas unveils its new campaign to celebrate the FIFA Women’s World Cup Australia & New Zealand 2023™. The campaign is dedicated to next gen icons Alessia Russo, Lena Oberdorf and Mary Fowler and looks to drive more global attention for the game and inspire other young women and girls to follow in their footsteps.

Marking adidas’ most impactful Women’s World Cup campaign to date, the brand unites its global family of football legends and advocates of the women’s game. Headlined by a series of fast-paced films, the campaign welcomes a star-studded line up of David Beckham, Leon Goretzka and Ian Wright, actor and football fan, Jenna Ortega, as well as Argentina’s World Cup hero, Lionel Messi. They come together to celebrate the skills that Russo, Oberdorf and Fowler are renowned for, from vision and interception to power, creativity and accuracy.

The films are part of a new creative proposition from adidas for the upcoming tournament. ‘Play Until They Can’t Look Away’ aims to platform and showcase some of the world’s greatest football players on the biggest stage – whose skills and passion for the game demand global attention and support.

Set against the soundtrack of SL2’s iconic song, On a Ragga Tip, fans see World Cup winner, Lionel Messi, alongside Mary Fowler, guiding both viewers and Jenna Ortega across the world to Fowler’s home country of Australia , with preparations for the biggest women's sporting moment underway.

Meanwhile, David Beckham and Ian Wright, alongside his granddaughter, Women’s Arsenal FC player, Raphaella Wright-Phillips, are unable to look away in a supermarket as Russo spectacularly weaves her way through the narrow aisles, in her own creative fashion. Finally, Goretzka is expertly interrupted while bowling as Oberdorf whizzes around an arcade, powerfully intercepting balls in each scene to achieve a high score of her own.

Paying respect to those who have gone before, the films are also filled with subtle references to memorable moments that football super fans will revel in, including shirt numbers, iconic tournament balls, plus much more.

More information:
adidas AG Sportswear
Source:

adidas AG

print close
more
12.07.2023

SHIMA SEIKI to exhibit at Tech Fashion shows in Brazil

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

The potential of each of these knitting machines are maximized in combination with the SDS®-ONE APEX4 3D design system and APEXFiz® design software. At the core of the company’s "Total Fashion System" concept, SDS®-ONE APEX4 and APEXFiz® provide comprehensive support throughout the apparel supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design to production and even sales promotion. Especially effective is their capability to improve on the design and evaluation process with virtual sampling. Ultra-realistic simulation capability on SDS®-ONE APEX4 and APEXFiz® allows virtual sampling to minimize the amount of time, cost and material spent during the sample-making process

The fashion show will feature the newest creations in WHOLEGARMENT® and other knitwear.

More information:
Shima Seiki flat knitting technology
Source:

SHIMA SEIKI MFG., LTD.

print close
more
ANDRITZ: New spunlace pilot line for natural and recycled fibers Photo: ANDRITZ
New ANDRITZ carding machine dedicated to natural and recycled fibers in the ANDRITZ Perfojet technical center in Montbonnot, France
07.07.2023

ANDRITZ: New spunlace pilot line for natural and recycled fibers

International technology group ANDRITZ has installed a new spunlace pilot line at its center of competence in Montbonnot, France. It allows customers and partners to conduct trials for producing nonwovens from recycled and/or natural fibers such as hemp, flax, and cotton.

The new pilot line features optimized web forming and entanglement for smooth processing of sensitive and irregular fibers. The innovative card set-up is designed to protect and maintain the quality of the fibers while achieving outstanding productivity rates.

Another special feature of this pilot line is the integrated ANDRITZ Metris digitalization system. It allows the operators to collect and analyze all useful data about the line’s capacity and performance. This is a perfect tool for optimizing costs, saving time and predicting maintenance.

International technology group ANDRITZ has installed a new spunlace pilot line at its center of competence in Montbonnot, France. It allows customers and partners to conduct trials for producing nonwovens from recycled and/or natural fibers such as hemp, flax, and cotton.

The new pilot line features optimized web forming and entanglement for smooth processing of sensitive and irregular fibers. The innovative card set-up is designed to protect and maintain the quality of the fibers while achieving outstanding productivity rates.

Another special feature of this pilot line is the integrated ANDRITZ Metris digitalization system. It allows the operators to collect and analyze all useful data about the line’s capacity and performance. This is a perfect tool for optimizing costs, saving time and predicting maintenance.

With the new line, the ANDRITZ Nonwoven team now operates two spunlace pilot lines at the Montbonnot technical center. The first line has optimized processes, for instance WetlaceTM, for processing various synthetic and man-made fibers. ANDRITZ process experts ensure that advanced technology and know-how are available under one roof at Montbonnot.

More information:
Andritz spunlace spunlace line recycling fibers natural fibers
Source:

ANDRITZ AG

print close
more
Tatham: ‘Field to Fibre’ service for industrial hemp fibre production Photo: BTMA / Tatham
Tatham director Tim Porritt
07.07.2023

Tatham: ‘Field to Fibre’ service for industrial hemp fibre production

BTMA member Tatham has just delivered an advanced industrial hemp processing line to a major customer in Turkey and had many fruitful discussions about its machinery for the processing of natural staple fibres at the recent ITMA 2023 held in Milan from June 8-14.

The Bradford, UK-based company continues to equip mills around the world with staple fibre spinning and nonwoven technologies for manufacturing a wide range of products, while its TS system for drives and controls is suitable for retrofitting to all OEM textile machines, to provide user-friendly control systems with complete synchronisation and significant energy savings.

“We are currently fielding a lot of enquiries for technologies for the decortication, fibre opening and fabric forming of hemp,” said Tatham director Tim Porritt. “This is being driven by the sustainability of the fibre and concerns over climate change as brands seek solutions to meet their sustainability goals. As a result, there has been an explosion in the interest in hemp production, from farmers through to fibre production, and a wide range of new potential end-uses are being explored.”

BTMA member Tatham has just delivered an advanced industrial hemp processing line to a major customer in Turkey and had many fruitful discussions about its machinery for the processing of natural staple fibres at the recent ITMA 2023 held in Milan from June 8-14.

The Bradford, UK-based company continues to equip mills around the world with staple fibre spinning and nonwoven technologies for manufacturing a wide range of products, while its TS system for drives and controls is suitable for retrofitting to all OEM textile machines, to provide user-friendly control systems with complete synchronisation and significant energy savings.

“We are currently fielding a lot of enquiries for technologies for the decortication, fibre opening and fabric forming of hemp,” said Tatham director Tim Porritt. “This is being driven by the sustainability of the fibre and concerns over climate change as brands seek solutions to meet their sustainability goals. As a result, there has been an explosion in the interest in hemp production, from farmers through to fibre production, and a wide range of new potential end-uses are being explored.”

Tatham offers a complete ‘Field to Fibre’ service for industrial hemp fibre production and its decortication and cleaning process has a gentle opening action to maintain the fibre length, to make it suitable for subsequent processing.

More information:
Tatham BTMA British Textile Machinery Association hemp
Source:

BTMA

print close
more
Monforts: Solid Success at ITMA 2023 Photo: Monforts / AWOL Media
07.07.2023

Monforts: Solid Success at ITMA 2023

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

More information:
Monforts A. Monforts Textilmaschinen GmbH & Co. KG ITMA 2023
Source:

A. Monforts Textilmaschinen GmbH & Co. KG

print close
more
Marco Salvadè appointed new ACIMIT president Photo: ACIMIT
Marco Salvadè, ACIMIT president
07.07.2023

Marco Salvadè appointed new ACIMIT President

At the association’s General Assembly held on July 4th, Marco Salvadè has been appointed to replace Alessandro Zucchi as President of ACIMIT.

Marco Salvadè began his career at Salvadè Srl, the family company specializing in the finishing machinery sector, founded by his father and uncle in 1967. After being a member of the company’s board of directors, he has been President since 2021.

Following the election of Salvadè, the General Assembly expressed its gratitude to the outgoing president, Alessandro Zucchi, who has guided the association for the past six years.

At the association’s General Assembly held on July 4th, Marco Salvadè has been appointed to replace Alessandro Zucchi as President of ACIMIT.

Marco Salvadè began his career at Salvadè Srl, the family company specializing in the finishing machinery sector, founded by his father and uncle in 1967. After being a member of the company’s board of directors, he has been President since 2021.

Following the election of Salvadè, the General Assembly expressed its gratitude to the outgoing president, Alessandro Zucchi, who has guided the association for the past six years.

Along with the new president, the General Assembly also elected its new Vice Presidents, Chiara Bonino (Bonino Carding Machines SRL), Federico Businaro (Sperotto Rimar SRL), Ugo Ghilardi (Itema SpA) and Cristian Locatelli (Marzoli Machines Textile SRL). Marco Salvadè’s first comments as newly appointed ACIMIT president: “I wish to thank the Assembly for the trust they have placed in me, and I want to express my gratitude to the former President Alessandro Zucchi for everything he has done during the last six years to strengthen the role of the association and of Italian industry on the international scene. With the new vice-presidents and the ACIMIT Board, I will continue the work that has been done in recent years by previous presidents. It will certainly not be a simple task, but one that will no doubt prove stimulating. My primary goal is to increase the sense of belonging to ACIMIT of its member companies, with which we share the same values, and to adjust the association’s strategies to changing conditions in the economic and geopolitical context.”

More information:
ACIMIT President Italian textile machinery
Source:

ACIMIT

print close
more
Groz-Beckert: Over 7,000 customers and business partners at its ITMA 2023 booth (c) Groz-Beckert KG
07.07.2023

Groz-Beckert: Over 7,000 customers and business partners at its ITMA 2023 booth

From June 8 to 14, 2023, the leading international trade fair for textile machinery manufacturing ITMA took place in Milan, Italy. In total, over 111,000 guests visited the trade fair. Groz-Beckert was able to present its innovations to more than 7,000 customers and business partners, as well as welcoming many other visitors to its booth – including over 280 students.

An international audience gathered at the Groz-Beckert booth: guests came from 84 different countries. The majority of visitors came from Italy with just under 15 percent, followed by Germany with 14 percent, Turkey with 11 percent, India with 9 percent and the USA with 3 percent. For the first time, HR specialists were on hand at the Groz-Beckert booth to look after the student groups, offering the young people comprehensive insights together with experts from the Technology and Development Center (TEZ).

From June 8 to 14, 2023, the leading international trade fair for textile machinery manufacturing ITMA took place in Milan, Italy. In total, over 111,000 guests visited the trade fair. Groz-Beckert was able to present its innovations to more than 7,000 customers and business partners, as well as welcoming many other visitors to its booth – including over 280 students.

An international audience gathered at the Groz-Beckert booth: guests came from 84 different countries. The majority of visitors came from Italy with just under 15 percent, followed by Germany with 14 percent, Turkey with 11 percent, India with 9 percent and the USA with 3 percent. For the first time, HR specialists were on hand at the Groz-Beckert booth to look after the student groups, offering the young people comprehensive insights together with experts from the Technology and Development Center (TEZ).

Groz-Beckert presented numerous innovations from its six product divisions Knitting, Weaving, Felting, Tufting, Carding and Sewing at the ITMA. One focus of the innovations was on the topics of efficiency, process stability and sustainability. While the topic of sustainability was reflected in the products on the one hand, a separate area in the Groz-Beckert Gallery was dedicated to the topic on the other. Here it was shown what contribution Groz-Beckert is making to making its own productions and its sites sustainable.

More information:
Groz-Beckert ITMA 2023 knitting weaving felting tufting Carding sewing technology
Source:

Groz-Beckert KG

print close
more
STOLL launches a new innovation package (c) STOLL, KARL MAYER GROUP
07.07.2023

STOLL launches a new innovation package

ITMA 2023 was a successful platform for the flat knitting machine manufacturer STOLL to present its latest new developments. The business unit of the KARL MAYER GROUP will be following up this fair on 3 July with the launch of a further innovation package. With the solutions contained in this package, STOLL will be offering its customers additional added value when using their flat knitting machines - in line with the concept of bundling innovations.

ITMA 2023 was a successful platform for the flat knitting machine manufacturer STOLL to present its latest new developments. The business unit of the KARL MAYER GROUP will be following up this fair on 3 July with the launch of a further innovation package. With the solutions contained in this package, STOLL will be offering its customers additional added value when using their flat knitting machines - in line with the concept of bundling innovations.

The new features include an optimised central lubrication system that reduces both maintenance effort and oil consumption, this as standard from July 2023 for all models of the CMS and ADF series produced in Reutlingen.
Compared to the previous optional variant, it ensures more efficient and comprehensive lubrication. All needle bed elements, from the holding-down jack to the coupling part and intermediate slider to the selection jack, are now supplied with oil. The machine itself recognises whether lubrication is required. Independently of this, the lubrication intensity and oil distribution can be adapted to the individual machine conditions by setting various parameters, if required. To ensure that the required amount of lubricant is reliably supplied, a message is sent if the level is too low.

In addition, a new oil drain container as standard equipment for all CMS and ADF models catches used oil from the needle bed under the machine. This prevents soiling of floors or knitted fabrics. The emptying of the container can be efficiently managed by an adjustable reminder function. The neat and at the same time sustainable solution does not require cleaning agents or hoovers and offers the possibility to reuse the oil after cleaning through special filters, if necessary.

Users of CMS and ADF belt take-down machines can benefit from optimisations around the belt take-down. Thanks to the new STOLL innovation package, this can be turned forwards and backwards by means of a switch as standard in order to easily eliminate fabric wraps and thus reduce maintenance times. In addition, a mirror, which is also fitted as standard, ensures a simple visual check of the belt take-down.

Another solution of the STOLL innovation package from July 2023 includes new cams that enable split-stitch implementation without cam box modification. This reduces manual effort and thus conversion times and costs. The feature is standard on all fine gauges ADF and CMS machines.

For the W machines from STOLL, there is now a further inlay yarn carrier, the Qt, in addition to the previous Qw yarn carrier. The extension means that the number of inlay yarn carriers used in a system can be increased from the previous one to three. No additional system is required for the weft yarn, and the process steps weft yarn insertion and knitting take place in the same system.

More information:
Stoll Karl Mayer Group ITMA 2023 flat knitting machine
Source:

KARL MAYER Verwaltungsgesellschaft mbH

print close
more
(c) Mayer & Cie. GmbH & Co. KG
05.07.2023

Mayer & Cie. draws positive balance on ITMA 2023

From circular knitting machines and braiders via upgrades to digital solutions, Mayer & Cie. presented at ITMA 2023 a wide range of solutions that make circular knitting machines and braiding machines even more durable and thereby more valuable, for which the long-established firm received a positive visitor response.

From machinery manufacturer to solution provider
Three circular knitting machines – a Relanit 3.2 HS, an SF4-3.2 III and the OVJA 2.4 EM – and an MR-15/18C/Single Deck braiding machine took up about half the floor space of Mayer & Cie.’s ITMA stand. That reflected the weighting of the trade fair presentation. Along with high-tech circular knitting and braiding products the Mayer & Cie. focus at this year’s ITMA was on solutions that increase the value and durability of its machines. Including the digital platform knitlink, the new Control 5.0 machine control system, the camera-assisted error recognition system knithawk, almost a dozen upgrade kits for existing machines and the new oiler system Senso Blue RS.

From circular knitting machines and braiders via upgrades to digital solutions, Mayer & Cie. presented at ITMA 2023 a wide range of solutions that make circular knitting machines and braiding machines even more durable and thereby more valuable, for which the long-established firm received a positive visitor response.

From machinery manufacturer to solution provider
Three circular knitting machines – a Relanit 3.2 HS, an SF4-3.2 III and the OVJA 2.4 EM – and an MR-15/18C/Single Deck braiding machine took up about half the floor space of Mayer & Cie.’s ITMA stand. That reflected the weighting of the trade fair presentation. Along with high-tech circular knitting and braiding products the Mayer & Cie. focus at this year’s ITMA was on solutions that increase the value and durability of its machines. Including the digital platform knitlink, the new Control 5.0 machine control system, the camera-assisted error recognition system knithawk, almost a dozen upgrade kits for existing machines and the new oiler system Senso Blue RS.

Trade fair debut for Mayer & Cie. braiding machine
Mayer & Cie. also exhibited a braiding machine at ITMA for the first time. The company has integrated the braiding division at is Albstadt headquarters since 2019. “Braiding machines are a part of textile machinery,” said Mayer & Cie. Managing Partner Benjamin Maye, “but we nevertheless saw presenting the MR-15/18C/SD braider at ITMA as an experiment – and are satisfied with the result. The machine attracted a great deal of attention and we were able to make interesting contacts.”

A positive conclusion on ITMA 2023
Expectations of this year’s ITMA were moderate, Benjamin Mayer said. “War, high energy prices, inflation and recession are the signs of the times. Not even an ITMA is going to change that.” In addition, there had been serious problems with the issue of visas that had made it impossible for many potential visitors to attend the trade fair.

The Mayer & Cie. management therefore judged its success not by the general demand but by the positive visitor feedback. “For us that was an indicator of our future competitiveness,” said CEO Benjamin Mayer, “and we can definitely be sure of that with our developments.”

More information:
Mayer & Cie textile machinery manufacturer ITMA 2023
Source:

Mayer & Cie. GmbH & Co. KG

print close
more
Kornit Digital at ITMA 2023 (c) Kornit Digital
23.06.2023

Kornit Digital successfully concluded ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashion and textile production technologies, announced the Company successfully concluded its exhibition at ITMA 2023, experiencing high volumes of engagement with new customers from key regions, such as India, Turkey, China, Central and South America.

With its industry-first vibrant new NeoPigment™ Vivido digital inks, the Kornit Presto MAX had a strong reception at ITMA. Also taking center stage was the anticipated Kornit Apollo platform, which delivers on the industry need for automated, high-throughput digital on-demand garment decoration at scale. Built on tested Kornit MAX technology, the Apollo effectively brings sustainable digital production to the mainstream.

“Our Apollo system was welcomed at ITMA by an industry now realizing that digital is the only solution for making fashion and textile production sustainable, producing closer to the end consumer, eliminating problematic inventory, and delivering the highest quality without sacrificing profitability,” said Omer Kulka, Chief Innovation Officer at Kornit Digital.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashion and textile production technologies, announced the Company successfully concluded its exhibition at ITMA 2023, experiencing high volumes of engagement with new customers from key regions, such as India, Turkey, China, Central and South America.

With its industry-first vibrant new NeoPigment™ Vivido digital inks, the Kornit Presto MAX had a strong reception at ITMA. Also taking center stage was the anticipated Kornit Apollo platform, which delivers on the industry need for automated, high-throughput digital on-demand garment decoration at scale. Built on tested Kornit MAX technology, the Apollo effectively brings sustainable digital production to the mainstream.

“Our Apollo system was welcomed at ITMA by an industry now realizing that digital is the only solution for making fashion and textile production sustainable, producing closer to the end consumer, eliminating problematic inventory, and delivering the highest quality without sacrificing profitability,” said Omer Kulka, Chief Innovation Officer at Kornit Digital.

More information:
Kornit Digital digital printing Kornit Presto textile printer
Source:

Kornit Digital

print close
more
STOLL's book “Color in Knitting: By Designers, for Designers”. (c) STOLL by KARL MAYER
23.06.2023

Launch of STOLL's latest collection COLOR IN KNITTING

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Sustainability and responsible handling of precious natural resources were key factors driving the development of the latest trend collection, COLOR IN KNITTING. STOLL-knit and wear®, a technique that stands for seamless knitted garments, can play a significant role in reducing waste. In addition, fewer process steps are required in the production chain - with advantages for production efficiency.
For another highlight of COLOR IN KNITTING, the STOLL creatives have worked on imitating different yarn effects with knitting technology such as slub yarn optics or the simulation of fabrics like crepe de chine/crepe georgette

On the occasion of the 150th anniversary of STOLL, COLOR IN KNITTING features a selection of vintage pattern replicates. These patterns can be found in STOLL’s extensive sample archives in Reutlingen. It is impressive to learn that all these former fabric constructions can still be replicated today and also reinvented with todays machine features. This approach showcases the steep progression of technical advancements over the past 150 years.

STOLL´s latest trend collection culminates in the creation of an invaluable resource: the book “Color in Knitting: By Designers, for Designers”. This publication aims to cater to a diverse audience by presenting a comprehensive guide to designing with colors using various flat knitting technologies and will be presented in the chapter "Book release".

More information:
Stoll flat knitting machine knitting
Source:

STOLL by KARL MAYER

print close
more
Foto: KARL MAYER GROUP
22.06.2023

KARL MAYER GROUP zieht durchweg positives ITMA-Fazit

Nach den pandemiebedingten Einschränkungen und Ausfällen bei den Fachmessen der letzten Jahre endete die ITMA 2023 mit Rekordbesucherzahlen, auch für die KARL MAYER GROUP. Unter dem Motto „Master the Change – profitable, flexible, sustainable“ zeigte das Unternehmen auf einer Fläche von 1.350 m² Lösungen und Innovationen. Präsentiert wurden 11 Maschinen von allen Business Units der KARL MAYER GROUP, eine Vielzahl trendiger textile Anwendungen mit hohem Potenzial für neue Geschäfte und wegweisende digitale Angebote.

Nach den pandemiebedingten Einschränkungen und Ausfällen bei den Fachmessen der letzten Jahre endete die ITMA 2023 mit Rekordbesucherzahlen, auch für die KARL MAYER GROUP. Unter dem Motto „Master the Change – profitable, flexible, sustainable“ zeigte das Unternehmen auf einer Fläche von 1.350 m² Lösungen und Innovationen. Präsentiert wurden 11 Maschinen von allen Business Units der KARL MAYER GROUP, eine Vielzahl trendiger textile Anwendungen mit hohem Potenzial für neue Geschäfte und wegweisende digitale Angebote.

Die Anzahl der Besucher lag mit knapp 2.900 erfassten Kontakten weit über den Erwartungen. Die angestammten KARL MAYER-Geschäftsbereiche Wirkmaschinen, Kettvorbereitung und Technische Textilien verzeichneten ein Besucherplus von 20 bis 30 % gegenüber der ITMA 2019 in Barcelona. Auch das Interesse an der Präsentation des 2020 hinzugekommenen Geschäftsbereichs STOLL war bemerkenswert. Der Standareal für die Flachstrickerei war der meistbesuchte der Unternehmensgruppe. Erfreulich hoch war zudem die Anzahl der Neukontakte. Ihr Anteil lag bei rund 30 %. Viele Textil-Brands, aber auch Branchenfremde interessieren sich für die Potenziale in puncto Nachhaltigkeit und Businessentwicklung durch Innovationen entlang der gesamten textilen Fertigungskette.

„Wir konnten überwiegend sehr konkrete Projekt- und tiefe Fachgespräche führen. Mit den besprochenen Vorhaben eröffnen sich für uns und unsere Kunden mindestens bis zum Ende nächsten Jahres positive Perspektiven,“ erklärt Arno Gärtner, CEO der KARL MAYER GROUP. Inwieweit sich die Erwartungen erfüllen, hänge allerdings von der Erholung der weltweiten Textilmärkte und von den kommenden geopolitischen Entwicklungen ab. Die globale Dynamik der jüngsten Vergangenheit führte bereits zu Verschiebungen von Lieferstrukturen, die sich auch in der Länderverteilung der Besucher auf dem Stand der KARL MAYER GROUP zeigten. Zu den Top-Herkunftsländern gehörten Indien, die Türkei, Italien und Deutschland. Die Kettvorbereitung konnte sich zudem über ein großes Interesse aus Pakistan freuen. Der Flachstrickbereich STOLL erhielt viele Anfragen aus den USA und aus Bangladesch.

More information:
ITMA 2023 Karl Mayer Textilmaschinenfabrik
Source:

KARL MAYER GROUP

print close
more
Oliver Streuli , CFO Rieter Holding AG Foto Rieter
20.06.2023

Oliver Streuli new CFO at Rieter

The Board of Directors of Rieter Holding Ltd. unanimously has appointed Oliver Streuli to the Group Executive Committee of Rieter Group as Chief Financial Officer, effective August 1, 2023.

Oliver Streuli was from June 2019 until April 2023 CEO at PCS Holding AG in Frauenfeld (Switzerland), a private institutional investment company, where he was responsible for developing the investment strategy as well as the financial and strategic supervision of the industrial portfolio companies. He was also project manager for the IPO on the SIX Swiss Exchange at Stadler Rail AG, Bussnang (Switzerland). Previously, he held different positions at UBS.

He is currently a member of the Board of Directors of Swiss Steel Holding AG, Lucerne (Switzerland), and of Autoneum Holding AG, Winterthur (Switzerland).

Oliver Streuli was a member of the Board of Directors of several industrial and financial portfolio companies of PCS Holding AG in Switzerland, in Austria and in Türkiye, which are active in fields of electric propulsion systems, green mobility and rolling stock leasing.

The Board of Directors of Rieter Holding Ltd. unanimously has appointed Oliver Streuli to the Group Executive Committee of Rieter Group as Chief Financial Officer, effective August 1, 2023.

Oliver Streuli was from June 2019 until April 2023 CEO at PCS Holding AG in Frauenfeld (Switzerland), a private institutional investment company, where he was responsible for developing the investment strategy as well as the financial and strategic supervision of the industrial portfolio companies. He was also project manager for the IPO on the SIX Swiss Exchange at Stadler Rail AG, Bussnang (Switzerland). Previously, he held different positions at UBS.

He is currently a member of the Board of Directors of Swiss Steel Holding AG, Lucerne (Switzerland), and of Autoneum Holding AG, Winterthur (Switzerland).

Oliver Streuli was a member of the Board of Directors of several industrial and financial portfolio companies of PCS Holding AG in Switzerland, in Austria and in Türkiye, which are active in fields of electric propulsion systems, green mobility and rolling stock leasing.

Oliver Streuli was born in 1988 and is a Swiss citizen. He holds a Master’s degree in Accounting and Finance from University St. Gallen (HSG),

More information:
Rieter Holding AG Oliver Streuli
Source:

Rieter Management AG

print close
more
19.06.2023

SHIMA SEIKI to exhibit at Pitti Filati

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 93rd edition of the Pitti Immagine Filati exhibition in Florence, Italy. It will exhibit as part of the new CustomEasy section, which explores the various aspects of customization in the presence of textile machinery, including a multi-faceted lineup of SHIMA SEIKI WHOLEGARMENT® knitting machines.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 93rd edition of the Pitti Immagine Filati exhibition in Florence, Italy. It will exhibit as part of the new CustomEasy section, which explores the various aspects of customization in the presence of textile machinery, including a multi-faceted lineup of SHIMA SEIKI WHOLEGARMENT® knitting machines.

The WHOLEGARMENT® knitting machine SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle™. SWG-XR® features a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at Pitti Filati will be shown in 18L.

Affectionately referred to as “SWG®-Mini,” SHIMA SEIKI's compact line of WHOLEGARMENT® machines allows customers to take advantage of the same short lead times and versatile production as larger WHOLEGARMENT® knitting machines, but with minimal investment. SWG®091N2 with its 36-inch (90cm) knitting width is especially suited to knitting a wide variety of items including accessory items as well as childrenswear and smaller size garments, all without the need for linking or sewing afterward. At Pitti Filati SWG®091N2 will be shown in 5 gauge.

A new proposal in WHOLEGARMENT® knitting will also be shown in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 93, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes. By replacing physical samples, virtual samples reduce time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio, as well as samples from SHIMA SEIKI headquarters for assessing the potential of SHIMA SEIKI knitting machines.

More information:
Shima Seiki Pitti Filati knitting machines knitting WHoLEGARMEnT®
Source:

SHIMA SEIKI MFG., LTD.

print close
more