From the Sector

Reset
15 results
06.11.2023

Mahlo presents new solutions at ITMA Asia 2023

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Also contributing to high-quality textile production and finishing is the Famacont PMC for controlling weft and stitch course density, which will also be on show at ITMA Asia. The Famacont PMC-15 uses a sensor to measure the yarn or stitch density and compares it with the target value stored in the recipe data management system. The detected deviation of the yarn density from the target value is used to fully automatically regulate the leading during the needling process on the stenter frame. Interested parties can have the mode of operation explained to them at the Mahlo booth with the help of a demo tower and their own or provided fabric samples.

Another major topic remains Industry 4.0, because the best measured data is of no use if it cannot be utilized. Mahlo has continuously developed its digital environment mSmart. "Our systems generate data that the customer can use immediately to regulate goods on-line. At the same time, all measured values are backed up in our data management system mLog enhanced and can be retrieved at any time. With this historical data, processes can be optimized and weak points in the process can be minimized," explains Sales Manager Thomas Höpfl.

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

08.09.2022

Monforts at ITMA ASIA + CITME

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

“Many more applications are possible, such as the overdyeing of denim, the creation of double-face coated materials, fabrics awnings, tents and medical drapes and the pre-treatment of substrates for digital printing”, explains Gunnar Meyer, Monforts area sales manager for China. “A range of different doctor blades and their combinations can be supplied to meet individual requirements, including air knife, roller knife, foam, screen and magnetic roller coating. The latter option is recommended for lines with working widths of over 2.4 metres.”

In addition, Monforts can provide the necessary explosion-proof ranges for solvent-based coatings and high temperature processes up to 320°C, such as the PTFE coating of nonwoven filter material. These lines are equipped with special burners, stenter chains, and insulation.

Source:

 A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) Groz-Beckert KG
07.07.2021

Groz-Beckert at ITMA Asia: “complete success”

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

More information:
Groz-Beckert ITMA Asia + CITME
Source:

Groz-Beckert KG

Swiss Textile Machinery companies at ITMA Asia + CITME (c) 2021, Swissmem
Impression from ITMA Asia + CITME 2020
18.06.2021

Swiss Textile Machinery companies at ITMA Asia + CITME

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob
OERLIKON: Largest staple fiber plant order in the company's history (c) Oerlikon Textile GmbH & Co. KG
Shen Jianyu, Chief Executive Officer of Xinfengming Group Co. together with Oerlikon Manmade Fibers Solutions Sales Director Felix Chau and Sales Manager Wang Xiaoxin at the signing of the contract for eight new staple fiber lines from Oerlikon Neumag.
15.06.2021

OERLIKON: Largest staple fiber plant order in the company's history

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

SHIMA SEIKI to exhibit at ITMA Asia and CITME 2020 (c) SHIMA SEIKI
02.06.2021

SHIMA SEIKI to exhibit at ITMA Asia and CITME 2020

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HonG KonG) LTD., will participate in the ITMA Asia + CITME 2020 exhibition to be held at the national Exhibition and Convention Center in Shanghai, China in June.

Through its exhibit theme—Step Beyond—SHIMA SEIKI will present its vision of the future, while addressing a variety of solutions for the new normal, including proposals in Factory Automation, Digital Transformation (DX), and various online solutions.

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HonG KonG) LTD., will participate in the ITMA Asia + CITME 2020 exhibition to be held at the national Exhibition and Convention Center in Shanghai, China in June.

Through its exhibit theme—Step Beyond—SHIMA SEIKI will present its vision of the future, while addressing a variety of solutions for the new normal, including proposals in Factory Automation, Digital Transformation (DX), and various online solutions.

At ITMA Asia SHIMA SEIKI will be making proposals for factory automation centered around the special manufacturing capabilities of our WHOLEGARMENT® knitting machines. WHOLEGARMENT® knitwear can be knit in one entire piece without the need for linking or sewing, and allows for on-demand knitting. SHIMA SEIKI will present its WHOLEGARMENT® knitting technology in the form of two of the latest machines. The flagship MACH2XS is the one of most advanced flat knitting machines, featuring proprietary four-needle bed and Slideneedle™ technology combined with spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control, and capable of all-needle knitting of WHOLEGARMENT® items. MACH2XS is presented in ultrafine 18L gauge, shown for the first time in China. Also shown for the first time in China, MACH2VS, a flexible V-bed machine capable of knitting WHOLEGARMENT® knitwear using every other needle, or conventional shaped knitting using all needles. It also features spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control. MACH2VS is presented in ultrafine 18G with auto yarn carriers as a prototype option.

ITMA Asia will also be the occasion for a sneak preview of next-Generation 4-bed WHOLEGARMENT® knitting technology. The new machine is named SWG-XR, adopting the SWG moniker from the first-generation WHOLEGARMENT® knitting machine introduced back in 1995. The "X" represents 4 needle beds arranged in an Xshaped formation as per the original SWG-X machine, while "R" stands for Reborn and Revolution, referring to a renewal of SHIMA SEIKI's WHOLEGARMENT® knitting that raises the technology to unprecedented levels. By increasing the number of systems from 3 to 4 and featuring auto yarn carriers, SWG-XR allows even higher productivity and vastly improved range of knitting.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI has released three new online services over the past year which will also be showcased at ITMA Asia: 'APEXFiz™' subscription-based design software; 'yarnbank ™' digital yarn sourcing web service; and 'SHIMAnAVI™' e-learning service.

12.05.2021

Groz-Beckert in person and virtually at ITMA Asia 2021

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

More information:
Groz-Beckert ITMA
Source:

Groz-Beckert KG

26.04.2021

Rieter at ITMA Asia + CITME 2021 in June 2021

Ensuring Competitiveness Through Technology

Rieter has doubled down on its R&D efforts since the onset of the pandemic to accelerate the development of its suite of intelligent and automated machines and systems so customers can manufacture yarns more profitably, efficiently and sustainably. This also empowers mill owners to respond flexibly to fast-changing markets.

  • Ring spinning with G 38 and ROBOspin sets new standards in automation
  • COMPACTapron takes yarn strength to new heights
  • ESSENTIAL offers new features with smarter insights for better decisions
  • ROBOdoff automates doffing to save time and money
  • SSM’s new winder NEO-YW delivers more efficiency and sustainability
  • Graf’s new cylinder wire and flats enhance lifetime and quality

Ensuring Competitiveness Through Technology

Rieter has doubled down on its R&D efforts since the onset of the pandemic to accelerate the development of its suite of intelligent and automated machines and systems so customers can manufacture yarns more profitably, efficiently and sustainably. This also empowers mill owners to respond flexibly to fast-changing markets.

  • Ring spinning with G 38 and ROBOspin sets new standards in automation
  • COMPACTapron takes yarn strength to new heights
  • ESSENTIAL offers new features with smarter insights for better decisions
  • ROBOdoff automates doffing to save time and money
  • SSM’s new winder NEO-YW delivers more efficiency and sustainability
  • Graf’s new cylinder wire and flats enhance lifetime and quality
Source:

Rieter Management AG

14.11.2018

Oerlikon Manmade Fibers Segment at the OpenStack Summit in Berlin

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

Source:

Oerlikon Marketing, Corporate Communications & Public Affairs

 

(c) Oerlikon
18.10.2018

Oerlikon to cooperate with Shaoyang Textile Machinery on Spunmelt line solutions in future

Oerlikons business unit Nonwoven will cooperate with the Chinese machine and plant manufacturer Shaoyang Textile Machinery for nonwoven solutions in the hygiene market. This was announced by the Manmade Fibers segment at ITMA ASIA + CITME 2018.

Oerlikons business unit Nonwoven will cooperate with the Chinese machine and plant manufacturer Shaoyang Textile Machinery for nonwoven solutions in the hygiene market. This was announced by the Manmade Fibers segment at ITMA ASIA + CITME 2018.

The aim of both cooperation partners is to jointly advance the international sales of Spunmelt lines for hygiene applications in the field of disposable nonwovens outside China.
Oerlikons business unit Nonwoven will be responsible for the entire project in the future. To this end, the Neumünster-based company will contribute its know-how in plant engineering to the partnership. Additionally, Oerlikon acquires the CE certifications of all exported Shaoyang Spunmelt lines. Oerlikon will also be responsible for product and process guarantees and will provide worldwide customer services outside China. Shaoyang Textile Machinery, on the other hand, supplies the Spunmelt plant technologies.
"With Shaoyang Textile Machinery, we have found a renowned Chinese plant manufacturer with extensive know-how in the construction of Spunmelt plants for hygiene applications, which achieves international standards with its nonwoven qualities," explains Oerlikon Manmade Fiber Segment CEO Georg Stausberg.
Rainer Straub, Head of Oerlikons Nonwoven Business Unit, adds: "The partnership with Shaoyang Textile Machinery enables us to gain a foothold in the highly competitive hygiene market. Our many years of engineering experience guarantee our customers production lines according to international
standards for high-quality nonwovens".

Source:

Oerlikon

(c) Oerlikon
18.10.2018

Oerlikon kooperiert zukünftig bei Spunmelt- Anlagenlösungen mit Shaoyang Textile Machinery

Oerlikons Geschäftseinheit Nonwoven kooperiert zukünftig bei Vliesstofflösungen im Hygienemarkt mit dem chinesischen Maschinen- und Anlagenbauer Shaoyang Textile Machinery. Das gab das Segment Manmade Fibers im Rahmen der ITMA ASIA + CITME 2018 nun bekannt.

Oerlikons Geschäftseinheit Nonwoven kooperiert zukünftig bei Vliesstofflösungen im Hygienemarkt mit dem chinesischen Maschinen- und Anlagenbauer Shaoyang Textile Machinery. Das gab das Segment Manmade Fibers im Rahmen der ITMA ASIA + CITME 2018 nun bekannt.

Ziel beider Kooperationspartner ist es, die internationale Vermarktung von Spinnvliesanlagen für Hygieneanwendungen im Bereich der disposable Nonwoven (Einwegprodukte) außerhalb Chinas gemeinsam voranzubringen.
Oerlikons Geschäftseinheit Nonwoven trägt dabei zukünftig die Gesamtprojektverantwortung. Hierfür bringt das Neumünsteraner Unternehmen sein Know-how beim Plant-Engineering in die Partnerschaft mit ein, zeichnet neben der CE-Zertifizierung auch für die Produkt- und Prozessgarantien verantwortlich und übernimmt den weltweiten Kundendienst außerhalb Chinas. Shaoyang Textile Machinery liefert hingegen die Spunmelt-Anlagentechnologien.
„Mit Shaoyang Textile Machinery haben wir einen namhaften chinesischen Anlagenbauer mit umfangreichen Know-how beim Bau von Spunmelt-Anlagen für Hygieneanwendungen gefunden, der mit seinen Vliesqualitäten internationale Standards erzielt“, erklärt Oerlikon Manmade Fibers Segment CEO Georg Stausberg.
Rainer Straub, Leiter der Oerlikon Geschäftseinheit Nonwoven, ergänzt: „Die Partnerschaft mit Shaoyang Textile Machinery ermöglicht uns im stark wettbewerbsdominierten Hygienemarkt weiter Fuß zu fassen. Unsere jahrelange Engineering Erfahrung garantiert unseren Kunden Produktionslinien nach internationalen Standards für qualitativ hochwertige Vliese auf einem attraktiven Preisniveau.“

Source:

Oerlikon

(c) Itema Group
18.10.2018

Denim goes greener through the whole chain. Prosperity Textile acting as a pioneer and choosing the first sustainable innovation in the weaving industry: the brand-new iSAVER™ by Itema

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

More information:
Itema
Source:

Itema Group

(c) VDMA Textilmaschinen
15.10.2018

VDMA: Original technology makes the difference

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

“Choose the original - Choose success" is the message of the VDMA Textile Machinery at this trade fair. On the occasion of the VDMA press conference on the opening day of ITMA ASIA, Ms Karin Christine Schmidt, Technical Director VDMA Textile Machinery, emphasised: “Copycat machines may look similar to the systems they are designed to emulate. But only originals do not simply follow but are pacesetters of technological progress.” Original technology is a keystone of innovation. It has the potential to successfully turn visions of entirely new possibilities in the textile production into reality.

This approach is visualised at the VDMA booth. The stand achieves attention and emotion through the picture motif: Neuschwanstein Castle. This world-famous tourist magnet is more than that: it is also a successful original. A vision, which could be successfully implemented in the long term through innovation and technology!

During the press conference, 18 spokespersons of renowned VDMA member companies showed how original technology can indeed play a major role in China’s and other Asian nation’s efforts to increase the resource efficiency of the textile industry and to interconnect information technology and manufacturing processes.  

Topics of the companies included automation, performance improvement, quality, sustainable solutions (raw material, energy, water saving), Industry 4.0 (in China called intelligent manufacturing), digital AR/VR services, platforms and software.

You are welcome to explore the speakers' statements in the atached PDF.

More information:
VDMA ITMA Asia + CITME
Source:

VDMA Textilmaschinen