From the Sector

Reset
43 results
RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

Massimo Marchi Marchi & Fildi and Filidea
Massimo Marchi
12.03.2024

Massimo Marchi dies in road accident

The Directorship of Marchi & Fildi spa and Filidea srl announced the death of their President Massimo Marchi, in a tragic road accident on 11th March. His loss represents a moment of enormous sorrow for the Group and for the community to which Massimo Marchi contributed with such generosity and constructive spirit.

Massimo Marchi was an outstanding figure in the Italian and Biellese textile world.
Until his death, he was a member of the Council of Euratex, Vice President of SMI Sistema Moda Italia with responsibility for Research and Innovation, member of the Committee for Coordination and Management of Cluster Made In, and Councillor of the Association Tessile e Salute. His legacy will always be remembered and celebrated by those who had the privilege of knowing him and working with him.

The Directorship of Marchi & Fildi spa and Filidea srl announced the death of their President Massimo Marchi, in a tragic road accident on 11th March. His loss represents a moment of enormous sorrow for the Group and for the community to which Massimo Marchi contributed with such generosity and constructive spirit.

Massimo Marchi was an outstanding figure in the Italian and Biellese textile world.
Until his death, he was a member of the Council of Euratex, Vice President of SMI Sistema Moda Italia with responsibility for Research and Innovation, member of the Committee for Coordination and Management of Cluster Made In, and Councillor of the Association Tessile e Salute. His legacy will always be remembered and celebrated by those who had the privilege of knowing him and working with him.

More information:
Massimo Marchi italy Biella
Source:

Marchi & Fildi

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

(c) Swiss Textile Machinery Swissmem
16.02.2024

Recycled fibres: Swiss manufacturers for circularity

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Source:

Swiss Textile Machinery Swissmem

Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling« Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE
Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling«
06.02.2024

Transparente Ökobilanzierung des Kunststoffrecyclings

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Mit Ökobilanzstudien lassen sich nicht nur Produkte und Dienstleistungen über ihren gesamten Lebenszyklus hinweg bewerten, sondern es können auch verschiedene Recyclingverfahren und recycelter Kunststoff mit Neuware verglichen werden. Die Ergebnisse dienen als Entscheidungsgrundlage bei der Auswahl der Optionen mit den geringsten Umweltwirkungen. Die grundlegende Vergleichsgröße in jeder Ökobilanz ist die funktionelle Einheit. Alle Umweltwirkungen werden auf diese Größe bezogen. Das Recycling von Kunststoffen erfüllt immer mehrere Funktionen wie die ordnungsgemäße Behandlung von Abfällen und die Bereitstellung neuer Ressourcen für weitere Produkte. Der Umgang mit dieser Multifunktionalität in der Ökobilanzierung des Recyclings wird seit langem ohne Konsens diskutiert.

Die Fraunhofer CCPE-Forschenden möchten mit ihrem gerade erschienenen Positionspapier diese Herausforderungen und Anforderungen verdeutlichen, die bei der Bewertung und dem Vergleich von Kunststoffrecyclingaktivitäten bestehen. Der Fokus liegt auf der Unterscheidung zwischen den Funktionalitäten der Abfallbehandlung und Materialbereitstellung. »Wir wollen mit dem Positionspapier Raum für einen offenen und transparenten Austausch zwischen Wissenschaft, Industrie und Politik eröffnen, um Entscheidungen auf Basis des ökologischen Vergleichs verständlich und belastbar zu gestalten«, so Anna Kerps, Initiatorin des Positionspapiers und wissenschaftliche Mitarbeiterin des Fraunhofer CCPE.

Die Autor*innen weisen darauf hin, dass vergleichende Ökobilanzen zudem von verschiedenen Randbedingungen und Annahmen abhängen. Die Prüfung logischer Widersprüche in den Annahmen ist eine Hauptanforderung für aussagekräftige Vergleiche. Inkonsistente Ökobilanzstudien führen oft zu Fehlinterpretationen. Weitere Herausforderungen sehen sie im Umgang mit den verschiedenen Technologierouten und -skalen sowie der Komplexität von Recyclingrouten gemischter Abfälle. Unterschiedliche Abfallherkünfte und mitgesammelte Störstoffe beeinflussen die Qualität der Rezyklate – und müssen in der Bilanzierung berücksichtigt werden.

Weiterhin ist es auf methodischer Ebene wichtig, Modellierungsansätze in Bezug auf Multifunktionalität und Systemgrenzen zu verbessern. Der Vergleich verschiedener Recyclingverfahren und von Neuware mit Rezyklat ist herausfordernd, da sie unterschiedliche Funktionalitäten haben. Insgesamt fehlt es bisher an einem methodischen Konsens, um robuste und vergleichbare Ökobilanz-Ergebnisse zu erhalten.

Source:

Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE

ITMA Asia + CITME Photo: Swissmem
01.11.2023

15 member companies of Swiss Textile Machinery Association at upcoming ITMA Asia + CITME

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.

More information:
ITMA Asia + CITME Swissmem
Source:

Swissmem

Freudenberg´s comfortemp® FIBERBALL WB Series © Freudenberg Performance Materials
Freudenberg´s comfortemp® FIBERBALL WB Series
26.10.2023

Freudenberg launches sustainable, low-level BPA thermal insulation products

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

GRS-certified and OEKO-TEX® STANDARD 100 Class I certifications
Both products utilize 100% GRS-certified rPET fibers, customizable to any desired fill levels. Additionally, these new products not only comply with but significantly surpass the stringent OEKO-TEX® STANDARD 100 Class I certifications. While OEKO-TEX® categorizes low-level BPA as less than 100 parts per million (ppm), these new products contain less than 1 ppm BPA, a testament to Freudenberg’s unyielding standards.

DOWN FEEL WA 150LB and FIBERBALL WB 400LB are available globally and more low-level BPA thermal insulation options are available in Asia.

Source:

Freudenberg Performance Materials

02.03.2023

Recycling Atelier Augsburg and Kelheim Fibres cooperate

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

As a model factory, the Recycling Atelier Augsburg combines the most important processes of textile recycling and offers holistic and comprehensive research along the value chain," explains Georg Stegschuster, head of the Recycling Atelier Augsburg. The scientists research on all process steps of textile recycling: from material analysis to sorting, preparation and textile processing to sustainable product design. Comprehensive data collection and the use of artificial intelligence as well as innovative materials play a central role.

Kelheim Fibres is a producer of high-quality viscose fibres, which consist of cellulose, the main component of the renewable raw material wood, and are used worldwide for products in areas such as hygiene, textiles, and technical applications.

"In New Business Development as well as Fibre and Application Development, we follow the Open Innovation concept - the cooperation with the Recycling Atelier offers us an ideal platform for this. Here we work with partners to advance sustainability and performance," explains Maik Thiel, project manager at Kelheim Fibres.

Recycled cotton fibres are often very short or of uneven length, which makes further processing of 100 % recycled material a challenge. Adding speciality fibres from Kelheim Fibres should enable the production of high-quality new products, such as nonwovens. In the future, the fibres provided by Kelheim Fibres will also be made from recycled pulp.

Source:

Kelheim Fibres GmbH

(c) Trützschler
30.12.2022

Trützschler and Valérius 360 start collaborative project for recycled yarn

Valérius 360 wanted to make a sustainable, circular approach possible in the fashion industry. Working together with Trützschler, a collaborative project has now achieved high-quality recycled yarn – opening up massive potential to drive measurable progress toward a circular and sustainable textile industry.

Testing at the Trützschler Technical Center
The team from Valérius 360 wanted to find ways of improving the processes for yarns made from 50 % recycled and 50 % virgin cotton (Ne30). In particular, it was seeking ways to reduce thick and thin spots, which disturb the appearance of the textile surface.

At the Trützschler Technical Center in Mönchengladbach, they conducted special trials that showed that using a direct spinning process for this application delivers much better results than a process with a draw frame passage for rotor yarns.

In direct spinning, the sliver from the card is directly drawn in the draw frame which is integrated in the can stock. This involves one less process step than using an autoleveller draw frame, while also saving space and giving staff more time for other operations.

Valérius 360 wanted to make a sustainable, circular approach possible in the fashion industry. Working together with Trützschler, a collaborative project has now achieved high-quality recycled yarn – opening up massive potential to drive measurable progress toward a circular and sustainable textile industry.

Testing at the Trützschler Technical Center
The team from Valérius 360 wanted to find ways of improving the processes for yarns made from 50 % recycled and 50 % virgin cotton (Ne30). In particular, it was seeking ways to reduce thick and thin spots, which disturb the appearance of the textile surface.

At the Trützschler Technical Center in Mönchengladbach, they conducted special trials that showed that using a direct spinning process for this application delivers much better results than a process with a draw frame passage for rotor yarns.

In direct spinning, the sliver from the card is directly drawn in the draw frame which is integrated in the can stock. This involves one less process step than using an autoleveller draw frame, while also saving space and giving staff more time for other operations.

On-site support from Trützschler Customer Service
The team from Valérius 360 also received in-house training from the Trützschler Customer Service department. Together, they analyzed and significantly improved the process at the Valérius 360 production site. This helped to bring yarns made from recycled raw materials up to the required level of the 50% Usterstatistics. This is the reference level for yarns made from virgin raw materials. Accordingly, 50 % of all yarn producers with raw cotton for rotor yarns and comparable yarn counts produce a poorer quality.

Source:

Trützschler Group SE

Photo: ANDRITZ
21.12.2022

ANDRITZ: Customer day for hygiene products value chain

ANDRITZ has organized a customer day fully dedicated to the absorbent hygiene products value chain on November 09, 2022. This event took place at the ANDRITZ Diatec premises in Pescara, Italy, with a variety of key players from the nonwovens industry coming from all over Europe and beyond.

At this event, attendees benefited from live demonstrations of converting lines, market and nonwoven production insights, a panel discussion on sustainability, and networking opportunities, including:

  • Recent market situation, trends, and some food for thoughts
  • Technology insights for nonwoven roll-good production: Spunjet Soft, Air-Through Bonding, and Spunlace
  • Company tour with live demonstration of converting lines
  • Panel discussion on sustainability accompanied by important industry players around the value chain

ANDRITZ has organized a customer day fully dedicated to the absorbent hygiene products value chain on November 09, 2022. This event took place at the ANDRITZ Diatec premises in Pescara, Italy, with a variety of key players from the nonwovens industry coming from all over Europe and beyond.

At this event, attendees benefited from live demonstrations of converting lines, market and nonwoven production insights, a panel discussion on sustainability, and networking opportunities, including:

  • Recent market situation, trends, and some food for thoughts
  • Technology insights for nonwoven roll-good production: Spunjet Soft, Air-Through Bonding, and Spunlace
  • Company tour with live demonstration of converting lines
  • Panel discussion on sustainability accompanied by important industry players around the value chain
Source:

ANDRITZ Küsters GmbH

Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

Source:

Texaid / Texcircle

06.10.2022

Rieter and the Johann Jacob Rieter Foundation Sponsor Professorship for AI

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Building Expertise in the Field of Industrial AI
The Endowed Professorship will serve to build expertise in the field of Industrial AI and will oversee a group that will focus on teaching and research pertaining to trustworthy machine learning. This involves, for example, the deployment of artificial intelligence with the aim of optimizing production processes in relation to the use of raw materials and energy, and making expert knowledge more readily available.

In addition to research, for the purpose of knowledge transfer, the new professorship will also be active in teaching, in the bachelor's degree programs in Computer Science and in Data Science, in the Master of Science in Engineering, and in continuing education.

The annual commitment of CHF 300 000 over a period of six years will be financed equally by the Rieter Group and the Johann Jacob Rieter Foundation.
“The use of artificial intelligence in industry is becoming increasingly important, especially with regard to the potential of data for evaluation and control of complex processes. The support of the Johann Jacob Rieter Foundation and the Rieter Group will allow us to further expand AI research in the field of industrial applications,” explains Prof. Dr. Dirk Wilhelm, Director of the ZHAW School of Engineering.

“The use of Artificial Intelligence will make a significant contribution to automation and process optimization, and thereby advance sustainability in the textile industry. This makes it an important element of the leading technology that Rieter offers,” emphasizes Rieter CEO Dr. Norbert Klapper.

“The Smart Machines cluster is growing in importance,” says Thomas Anwander, member of the Foundation Board, and adds: “The Endowed Professorship for Industrial AI at the ZHAW aims to promote Winterthur as a technology location by pooling locally available strengths in mechanical engineering and Industry 4.0.”

(c) Fraunhofer CCPE
19.09.2022

Fraunhofer CCPE on the way to an international circular plastics economy

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

In a circular plastics economy, resources can be saved, products can be intelligently designed for long service life, and end-of-life losses can be reduced. Systemic, technical and social innovations are needed to make the transition from a linear to a circular economy a success. This is what the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE is researching in the three divisions “Materials”, “Systems” and “Business”. The cooperation of the six Fraunhofer institutes IAP, ICT, IML, IVV, LBF and UMSICHT enables a multi-stakeholder approach in which the appropriate R&D competencies are bundled.

Fraunhofer CCPE would like to present and discuss successful projects and research approaches on an international scale at the Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich. The summit is to become an international forum for exchanging ideas for solutions and innovations for a circular plastics economy.

Cross-industry collaboration - local, regional and international
Since August 2022, Prof. Manfred Renner, Institute Director of Fraunhofer UMSICHT, is the new head of Fraunhofer CCPE. He succeeds Prof. Eckhard Weidner, who has retired. “Cross-industry cooperation - very local, but also regional and international - is the elementary prerequisite for a functioning circular plastics economy. At the summit, players from all points of the compass will meet and network in order to rethink the plastics value chain together," explains Prof. Manfred Renner, adding, “We want to provide answers to the following questions:  How can we make all Circular Economy principles, i.e. the ten R-strategies, known? How can industry, science and society best cooperate in a transformation to a circular plastics economy for the greatest possible impact?”

Results of the Fraunhofer CCPE cluster so far are innovative approaches for circular business models, intelligent collection, sorting, and recycling technologies, but also new formulations for circular polymers and compounds to enable multiple recycling cycles. With the newly developed assessment tool CRL® , companies can, for example, self-assess the maturity of products or product systems with regard to the circular economy. The tool checks the extent to which a product already takes into account circular economy principles in the areas of product design, product service system, end-of-life management and circular economy, and where there is still potential for improvement.

Source:

Fraunhofer UMSICHT

Photo: Swissmem
05.09.2022

Swiss Textile Machinery Association: Symposium in Indonesia

  • Free trade deal boosts export potential

The time is right for Swiss textile machinery companies to grow their export business with Indonesia – one of the world’s top 10 textile producers. A free trade agreement between the two countries came into force in 2021, and market analyses show that there is scope for a significant increase in business in textile and textile machinery sectors.

This was the background to a successful symposium in the Indonesian capital Jakarta last month when Swiss Textile Machinery Association members presented their products and innovations to an invited audience of 200 delegates from Indonesian textile companies.

The symposium audience was welcomed by Philippe Strub, of the Swiss Embassy in Indonesia; Ignatius Warsito, from the Indonesia Ministry of Industry’s Chemical, Pharmaceutical and Textile Industry branch; Anne Patricia Sutanto, of the Indonesian Textile Association (API); and Ernesto Maurer, President of the Swiss Textile Machinery Association.

Swiss companies taking part were: Stäubli, Zeta Datatec, Loepfe, Saurer, Benninger, Rieter, Bräcker, Jakob Müller, Maag, Uster and SERV.

  • Free trade deal boosts export potential

The time is right for Swiss textile machinery companies to grow their export business with Indonesia – one of the world’s top 10 textile producers. A free trade agreement between the two countries came into force in 2021, and market analyses show that there is scope for a significant increase in business in textile and textile machinery sectors.

This was the background to a successful symposium in the Indonesian capital Jakarta last month when Swiss Textile Machinery Association members presented their products and innovations to an invited audience of 200 delegates from Indonesian textile companies.

The symposium audience was welcomed by Philippe Strub, of the Swiss Embassy in Indonesia; Ignatius Warsito, from the Indonesia Ministry of Industry’s Chemical, Pharmaceutical and Textile Industry branch; Anne Patricia Sutanto, of the Indonesian Textile Association (API); and Ernesto Maurer, President of the Swiss Textile Machinery Association.

Swiss companies taking part were: Stäubli, Zeta Datatec, Loepfe, Saurer, Benninger, Rieter, Bräcker, Jakob Müller, Maag, Uster and SERV.

The presentations were followed by panel discussions with speakers, and there were also networking opportunities at the companies’ exhibition tables.

Also taking part in a panel at the event was Testex, the independent Swiss organisation which provides testing, certification, OEKO-TEX® and other labels for the textile industry. Discussion focused on the relevance of innovation in textile technology to sustainability and ‘saving the planet.’  

Recent years have seen an acceleration in trade relations between Switzerland and Indonesia, which in 2008 was classed as one of eight priority countries for economic development cooperation by SECO, the Swiss Secretariat for Economic Affairs, with a joint economic and trade commission established the following year.
Collaboration was heightened further in 2018 with a Comprehensive Economic Partnership Agreement (CEPA) for Indonesia with Switzerland and the other EFTA countries. This more extensive form of free trade agreement was accepted after a popular referendum, and ultimately came into force in November 2021.

Trading between the two countries is supported by SERV, the Swiss export risk insurance organisation. This insures export goods against political and commercial risks and facilitates credit.

Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, said the Indonesia Symposium was ideally-timed, right after the CEPA came into effect: “With the free trade agreement in place, there is even greater potential for the development of trade between our countries,” she said.

“Business in textile and textile machinery is actually below the relative market shares for the sectors, so this stronger cooperation is probably overdue. It was a successful symposium, with enthusiastic participation from Indonesian textile companies, so we are optimistic about future export prospects for Swiss textile machinery.”

Source:

Swissmem

15.08.2022

THE ITALIAN LUSTER at Munich Fabric Start

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

"THE ITALIAN LUSTER" will allow all visitors an incredible journey into the Italian supply chain that has the ability to meet any demand of brands, from small to large production needs.

On the top floor of the Catalyzer Hall, it will be possible to view the individual collections of the companies in attendance and receive a beautiful gift specially created by the CADICA GROUP company from Carpi.

 
Participants
ACM - TRIMS AND ACCESSORIES PRODUCER
ACM was founded in 1982.
Since 1982, ACM has been providing the fashion world with unique, sought-after and customized details, guaranteeing prestigious and innovative workmanship. Each and every product is the result of the care we take at every stage of our production process: from the prototype, designed by putting the consumer's health first, to production with state-of-the-art machinery, which allows for fine workmanship and cutting-edge customization, while minimizing the impact on the environment (we are GRS certified) and complying with the strictest eco-toxicological regulations.

FASHION ART - LUXURY FASHION DESIGN
Fashionart is the brainchild of Andrea Rambaldi, who, after learning his trade from his parents, his mother a seamstress and his father the owner of a dye shop, decided to pursue a freelance career.
He began by collaborating with companies in the textile sector, where he deepened his knowledge in the field of chemistry and industrial processes, touching on the problems of processing cycles.
The real turning point came as a result of an important job for the Maison Chanel, which recognized the originality and effectiveness of his technical proposals. From that moment, this is 2008, FashionArt was born, a company focused on luxury fashion and design, expert in the design and production of garments.
From the idea to the final product, the company is able to support the client throughout the entire production process.
Since then, the company has grown and developed exponentially thanks to a team of managers, artists and experts whose experience makes them a benchmark in the high fashion industry. Fashionart operates exclusively in high fashion, a very difficult field in which to combine experience and technique with art and creativity, where our potential can be expressed to the fullest.

ELLETI - GARMENTS AND WASHING MAKER
Advocate of an approach that combines tradition, creativity, and innovation, for over 30 years Elleti Group has defined standards of absolute excellence for the denim industry. Born in the 80s in San Bonifacio, near Verona, the company developed in a one-of-a-kind context, a hotbed of ideas that led to the defining and establishing of new professions and skills in the field of denim treatment and garment personalization. Led by Luigi Lovato, right from the start the company established itself on the denim scene thanks to an ambitious and pioneering investment in new solutions. The following ten years mark an important growth which leads to the internationalization both of brand and production. After the implementing of a new department for garment dyeing, Elleti Group was ready to welcome the ever-increasing international demand, equipping itself with the first laundry in Tunisia, a country logistically central in the Mediterranean area, and as a result, ideal for the development of a complete textile supply chain. This successful story continues to unfold in the 2000s, a decade that marks the opening to the market of garment making thanks to two new structures in Romania, and peaks with the acquisition of Martelli Lavorazioni Tessili. Today Elleti Group stands firm in the market as a result of a complete offer that preserves the company’s artisanal vocation enriched through a constant process of responsible innovation.

In addition, companies BERTO INDUSTRIA TESSILE and OLIMPIAS GROUP will participate in the project by presenting their collections within their booths in the Catalyzer hall.

Source:

EFFE-BI SRL PR & COMMUNICATION

(c) Fraunhofer UMSICHT/Mike Henning
Prof. Christian Doetsch (l.) and Prof. Manfred Renner (r.)
09.08.2022

Fraunhofer UMSICHT: New institute directors

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

Source:

Fraunhofer UMSICHT

09.08.2022

Carbios joined WhiteCycle to process and recycle plastic textile waste

  • An innovative European project to process and recycle plastic textile waste
  • A partnership to reach the objectives set by the European Union in reducing CO2 emissions by 2030
  • A unique consortium rallying 16 public and private European organizations working together for more circular economy

Carbios joined WhiteCycle, a project coordinated by Michelin, which was launched in July 2022. Its main goal is to develop a circular solution to convert complex[1] waste containing textile made of plastic into products with high added value. Co-funded by Horizon Europe, the European Union’s research and innovation program, this unprecedented public/private European partnership includes 16 organizations and will run for four years.
 

  • An innovative European project to process and recycle plastic textile waste
  • A partnership to reach the objectives set by the European Union in reducing CO2 emissions by 2030
  • A unique consortium rallying 16 public and private European organizations working together for more circular economy

Carbios joined WhiteCycle, a project coordinated by Michelin, which was launched in July 2022. Its main goal is to develop a circular solution to convert complex[1] waste containing textile made of plastic into products with high added value. Co-funded by Horizon Europe, the European Union’s research and innovation program, this unprecedented public/private European partnership includes 16 organizations and will run for four years.
 
WhiteCycle envisions that by 2030 the uptake and deployment of its circular solution will lead to the annual recycling of more than 2 million tons of the third most widely used plastic in the world, PET[2]. This project should prevent landfilling or incineration of more than 1.8 million tons of that plastic each year. Also, it should enable reduction of CO2 emissions by around 2 million tons.
 
Complex waste containing textile (PET) from end-of-life tyres, hoses and multilayer clothes are currently difficult to recycle, but could soon become recyclable thanks to the project outcomes. Raw material from PET plastic waste could go back into creation of high-performance products, through a circular and viable value chain.
 
Public and private European organizations are combining their scientific and industrial expertises:

  • industrial partners (Michelin, Mandals, KORDSA);
  • cross-sector partnership (Inditex)
  • waste management companies (Synergies TLC, ESTATO);
  • intelligent monitoring systems for sorting (IRIS);
  • biological recycling SME (Carbios);
  • product life cycle analysis company (IPOINT);
  • university, expert in FAIR data management (HVL);
  • universities, research and technology organizations (PPRIME – Université de Poitiers/CNRS, DITF, IFTH, ERASME);
  • industry cluster (Axelera);
  • project management consulting company (Dynergie).

 
The consortium will develop new processes required throughout the industrial value chain:

  • Innovative sorting technologies, to enable significant increase of the PET plastic content of complex waste streams in order to better process them;
  • A pre-treatment for recuperated PET plastic content, followed by a breakthrough recycling enzyme-based process to decompose it into pure monomers in a sustainable way;
  • Repolymerization of the recycled monomers into like new plastic;
  • Fabrication and quality verification of the new products made of recycled plastic materials

 
WhiteCycle has a global budget of nearly 9.6 million euros and receives European funding in the amount of nearly 7.1 million euros. The consortium’s partners are based in five countries (France, Spain, Germany, Norway and Turkey). Coordinated by Michelin, it has an effective governance system involving a steering committee, an advisory board and a technical support committee.

[1] Complex waste: multi materials waste (Rubber goods composites and multi-layer textile)
[2] PET: Polyethylene terephthalate

Source:

Carbios

Photo: munich fabric start
02.08.2022

New Format oF MUNICH FABRIC START fully booked

THE SOURCE, the new one-stop solution for integrated fashion sourcing by Munich Fabric Start Exhibitions GmbH, is fully booked. In the Lokhalle, one of the largest cantilevered historic steel halls in Europe, THE SOURCE offers flexible sourcing services and solutions for newly conceived value chains on around 2,500 m2 in direct connection to MUNICH FABRIC START and BLUEZONE.
 
65 selected international manufacturing companies will present their offerings from cut-make-trim (CMT) to high-end production at the new fair from 30 August to 1 September 2022. A cluster of key sourcing countries such as Portugal, Turkey, Morocco, Tunisia, Bosnia and Vietnam will create a business-relevant mix for risk diversification, the right product mix and for every genre.
 
THE SOURCE will take place parallel to the MUNICH FABRIC START (30/08 – 01/09/2022) and BLUEZONE (30/08 – 31/08/2022) fairs, with a total of almost 900 exhibitors.

THE SOURCE, the new one-stop solution for integrated fashion sourcing by Munich Fabric Start Exhibitions GmbH, is fully booked. In the Lokhalle, one of the largest cantilevered historic steel halls in Europe, THE SOURCE offers flexible sourcing services and solutions for newly conceived value chains on around 2,500 m2 in direct connection to MUNICH FABRIC START and BLUEZONE.
 
65 selected international manufacturing companies will present their offerings from cut-make-trim (CMT) to high-end production at the new fair from 30 August to 1 September 2022. A cluster of key sourcing countries such as Portugal, Turkey, Morocco, Tunisia, Bosnia and Vietnam will create a business-relevant mix for risk diversification, the right product mix and for every genre.
 
THE SOURCE will take place parallel to the MUNICH FABRIC START (30/08 – 01/09/2022) and BLUEZONE (30/08 – 31/08/2022) fairs, with a total of almost 900 exhibitors.

Source:

KERN. Consulting for munich fabric start

01.08.2022

Stahl joins CLIB biotechnology network

Stahl, an active proponent of responsible chemistry, has joined CLIB, an international open innovation cluster of stakeholders in the biotechnology space. CLIB is committed to providing networking opportunities for its members across different industries and sectors with a view to using biotechnology to foster sustainability. Stahl’s membership of the network underlines the company’s commitment to open innovation and to working with partners across value chains to reduce its Scope 3 emissions.

Stahl, an active proponent of responsible chemistry, has joined CLIB, an international open innovation cluster of stakeholders in the biotechnology space. CLIB is committed to providing networking opportunities for its members across different industries and sectors with a view to using biotechnology to foster sustainability. Stahl’s membership of the network underlines the company’s commitment to open innovation and to working with partners across value chains to reduce its Scope 3 emissions.

CLIB members include large companies, SMEs, start-ups, academic institutes, universities, and other stakeholders engaged in biotechnology and the circular- and bioeconomy as a whole. As part of this cluster, Stahl seeks to connect with likeminded contacts and partners to explore opportunities for increasing the use of bio-based and bio-derived solutions in its chemistries, products, and applications. In turn, Stahl hopes to add value to other members of the network by providing a route to market for biotechnology solutions through the company’s extensive range of industrial products and applications.
 
Stahl’s first face-to-face interaction with its fellow CLIB members will take place at the CLIB Networking Day in October 2022.

More information:
Stahl CLIB biotechnology
Source:

Stahl Holdings B.V.

3 D Muster im Textil (Design und Foto: Gesa Balbig)
21.07.2022

„Design Goals“ in Augsburg – Alumni setzen Zeichen für nachhaltige Textilien

Noch bis zum 14. September 2022 zeigt das Staatliche Textil- und Industriemuseum Augsburg (tim) die Sonderausstellung „Design Goals“ zu nachhaltigen Textilien. Die Exponate stammen von Designerinnen, die am Fachbereich Textil- und Bekleidungstechnik an der Hochschule Niederrhein ihre Master-Ausbildung absolvierten und nun im Rahmen eines Europäischen Mentoring-Programms zusammen mit Professorin Dr. Marina-Elena Wachs ausstellen.

Zu sehen sind Modeentwürfe und andere Designobjekte aus Airbag-Stoffen, aus Textil-Ausschussware, aus Flusen, aus Herbstlaub, Papiergarnen und vieles mehr. Vor dem Hintergrund endlicher Ressourcen liegt der Fokus der zukunftsweisenden Arbeiten auf einem nachhaltigen Umgang mit dem Material Textil.

Die Ausstellung thematisiert den kreativen Prozess hinter vielversprechenden Innovationen im Mode-, Textil-, Interior- und Automotive Design und in der Architektur. Die Ausstellung gibt Einblicke in analoge und digitale Prozesse heutigen Gestaltens in einer nachhaltigen Welt von morgen.

Noch bis zum 14. September 2022 zeigt das Staatliche Textil- und Industriemuseum Augsburg (tim) die Sonderausstellung „Design Goals“ zu nachhaltigen Textilien. Die Exponate stammen von Designerinnen, die am Fachbereich Textil- und Bekleidungstechnik an der Hochschule Niederrhein ihre Master-Ausbildung absolvierten und nun im Rahmen eines Europäischen Mentoring-Programms zusammen mit Professorin Dr. Marina-Elena Wachs ausstellen.

Zu sehen sind Modeentwürfe und andere Designobjekte aus Airbag-Stoffen, aus Textil-Ausschussware, aus Flusen, aus Herbstlaub, Papiergarnen und vieles mehr. Vor dem Hintergrund endlicher Ressourcen liegt der Fokus der zukunftsweisenden Arbeiten auf einem nachhaltigen Umgang mit dem Material Textil.

Die Ausstellung thematisiert den kreativen Prozess hinter vielversprechenden Innovationen im Mode-, Textil-, Interior- und Automotive Design und in der Architektur. Die Ausstellung gibt Einblicke in analoge und digitale Prozesse heutigen Gestaltens in einer nachhaltigen Welt von morgen.

Der Titel „Design Goals“ bezieht sich auf die Ziele für nachhaltige Entwicklung (Sustainable Development Goals SDGs) der Vereinten Nationen. Die Ausstellung zeigt Design-Lösungen und Strategien in Form von Produkten, Materialien und Konzepten für die Zukunft: Kreative und textiltechnische Lösungen aus bisher ungenutzten Ressourcen.