From the Sector

Reset
24 results
adidas: Study on effect of pressure in sports (c) adidas AG
19.02.2024

adidas: Study on effect of pressure in sports

Under adidas’ ambition to help athletes overcome high pressure moments in sport, it has teamed up with leading sport neuroscientists, neuro11, to understand the impact it has within a game of football, basketball, and golf during penalty shootouts, high-stake putts and must-make free-throws.

Working with Emiliano Martínez, Ludvig Åberg, Nneka Ogwumike, Rose Zhang, and Stina Blackstenius, as well as amateurs in the game, adidas and neuro11 delved into their minds to identify and analyse where pressure peaks, to help athletes across the globe to better understand it.

Understanding from this study that grassroots athletes and their elite counterparts experience similarly intense levels of pressure in the biggest sporting moments - but elite athletes were up to 40% more effective at managing pressure during these moments1 - a toolbox of techniques has been developed, built from the specific findings, to assist next-gen athletes in managing and overcoming the feeling within their game.

Under adidas’ ambition to help athletes overcome high pressure moments in sport, it has teamed up with leading sport neuroscientists, neuro11, to understand the impact it has within a game of football, basketball, and golf during penalty shootouts, high-stake putts and must-make free-throws.

Working with Emiliano Martínez, Ludvig Åberg, Nneka Ogwumike, Rose Zhang, and Stina Blackstenius, as well as amateurs in the game, adidas and neuro11 delved into their minds to identify and analyse where pressure peaks, to help athletes across the globe to better understand it.

Understanding from this study that grassroots athletes and their elite counterparts experience similarly intense levels of pressure in the biggest sporting moments - but elite athletes were up to 40% more effective at managing pressure during these moments1 - a toolbox of techniques has been developed, built from the specific findings, to assist next-gen athletes in managing and overcoming the feeling within their game.

Covering in-depth detail on what pressure looks like within each sport, how it has been proven to impact specific in-game moments, the brain zones that neuro11’s state-of-the-art brain technology measures and the main insights from each athlete’s training session, each report sets out to support all athletes in accessing the optimal zone - the brain state in which they perform at their best.

Rounded off with science-backed tips that reveal the optimal area of a goal to strike a penalty, how to use time to regain focus before netting a free throw, as well as the impact of dwell time on putting in golf – the guides are shaped around enhancing mental focus during some of the most pressured moments across sport.

1 Findings captured during athlete training sessions, as part of adidas SS24 Brand Campaign, in collaboration with neuro11 (November ’23- January ’24). Study carried out with Emiliano Martínez, Ludvig Åberg, Nneka Ogwumike, Rose Zhang, and Stina Blackstenius, in addition to 5 grassroot athletes.

Source:

adidas AG

12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

Photo: Messe Düsseldorf, Constanze Tillmann
21.12.2022

WearRAcon Europe Conference to be held at A+A 2023

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.1

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

1 (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

Source:

Messe Düsseldorf GmbH

10.11.2022

INDA Call for Abstracts for World of Wipes® International Conference

INDA’s 17th annual World of Wipes® (WOW) International Conference is accepting abstracts through December 2, 2022, on innovative, inspiring, and informative wipe products, markets and technologies to be presented in Atlanta, GA, July 17-20, 2023.

Experts in the areas of dry and wet wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract of one or two paragraphs detailing the relationship of their presentation to wipes or wipe manufacturing. Along with a brief abstract summary, professionals should also submit a speaker’s photo, and biography. Information may be submitted online via the WOW website before December 2nd.

Over 450 wipes business leaders are expected to convene at the Atlanta Marriott Marquis Hotel July 17-20, 2023 to hear premium content in market research, product innovations, sustainability issues, new materials and substrates for all wiping products and their components.

INDA’s 17th annual World of Wipes® (WOW) International Conference is accepting abstracts through December 2, 2022, on innovative, inspiring, and informative wipe products, markets and technologies to be presented in Atlanta, GA, July 17-20, 2023.

Experts in the areas of dry and wet wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract of one or two paragraphs detailing the relationship of their presentation to wipes or wipe manufacturing. Along with a brief abstract summary, professionals should also submit a speaker’s photo, and biography. Information may be submitted online via the WOW website before December 2nd.

Over 450 wipes business leaders are expected to convene at the Atlanta Marriott Marquis Hotel July 17-20, 2023 to hear premium content in market research, product innovations, sustainability issues, new materials and substrates for all wiping products and their components.

The last WOW event held in Chicago connected more than 450 participants from 18 countries representing the entire wipes supply chain to explore issues and advancements in the growing multibillion-dollar wipes sector. WOW is targeted exclusively for wipes brand owners, converters, manufacturers, and their entire supply chain.

The WOW Committee is developing content for a timely and relevant program that targets such areas as energy consumption, digitalization, global supply chain challenges, the plastics issue, ingredient transparencies, market intelligence, substrate developments, converting systems, material science, packaging, and circularity advances in personal and industrial wipes.

Training at the WOW 2023 Conference
The WIPES Academy, the industry’s first and only comprehensive wipes training for the entire supply chain, will occur prior to the conference start, July 17-18. Participants will gain a strong foundation of fundamental wipes knowledge, covering the basics of wipes design, manufacturing and applications, market trends, and opportunities in new product areas. At least two years of basic nonwoven fabrics knowledge or completion of the INDA Elementary Nonwovens Course are the recommended prerequisites.

More information:
INDA WOW World of Wipes
Source:

INDA

(c) INDIA
13.10.2022

Finalists for Hygienix Innovation Award™ announced

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

Egal Pads: Pads on a Roll™ –A wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed. This product promotes period product accessibility and destigmatizes menstrual health. It is targeted to schools and universities and the away-from-home market.

Kimberly-Clark: Kotex® Pantyliner with pH Indicator – The new Kotex Pantyliner with pH indicator, shifts color at the moment it needs to be replaced. This technology works by changing the color from yellow to blue when activated by fluids such as urine, sweat, or others. By indicating the moment to change the product, helps to maintain the intimate area clean, fresh, and consequently healthy.

Sposie Kids: Sposie® Dribbles® Potty Training Pads – An absorbent potty training pad that adheres to boy’s and girl’s underwear to protect against leaks and accidents during the transition from diapers to underwear, while still providing physical cues to the wearer to promote potty training.  The pads absorb over half of an average 2-year-old’s bladder capacity and are 100 percent free from any fragrance, latex, and chlorine.

Hygienix™ Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on sustainability with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and the latest market forecasts and insights into consumer buying trends.
Hygienix™ will also offer two specialized workshops, a myriad of business connection opportunities, a welcome reception, first-time attendee mentorship program, and two evenings of tabletop receptions.

More information:
Hygienix India
Source:

INDIA

Mixed reality glasses: A pilot project at Adient supports the induction of new employees". Mixed reality glasses: A pilot project at Adient supports the induction of new employees". Bild: Adient
25.05.2022

Adient wins "German Innovation Award 2022"

Adient, a leading global supplier of automotive seating systems, has won the "German Innovation Award 2022" in the category "Information Technologies and Functional Software". Adient's concept of "Mixed Reality as a key to efficient induction training", developed as a pilot project by employees at Adient’s Saarlouis production site, was able to convince the interdisciplinary jury of experts from science and technology.

Adient's concept aims to efficiently train new employees in production areas with the aid of mixed reality glasses. These glasses can be used to scan QR codes that are attached to each workstation. The QR codes call up corresponding videos in the field of view of the glasses which visually help the user to learn about the processes at the respective workstation, thus replacing the previous paper-based work instructions.

Adient, a leading global supplier of automotive seating systems, has won the "German Innovation Award 2022" in the category "Information Technologies and Functional Software". Adient's concept of "Mixed Reality as a key to efficient induction training", developed as a pilot project by employees at Adient’s Saarlouis production site, was able to convince the interdisciplinary jury of experts from science and technology.

Adient's concept aims to efficiently train new employees in production areas with the aid of mixed reality glasses. These glasses can be used to scan QR codes that are attached to each workstation. The QR codes call up corresponding videos in the field of view of the glasses which visually help the user to learn about the processes at the respective workstation, thus replacing the previous paper-based work instructions.

With this concept, Adient is using the technology to design and develop world-class seating solution for its global customers. New employees can thus be given a comprehensive understanding of the complex structures of a car seat much better, faster, and in a more realistic way. In addition to optimized communication, changes in the process such as product modifications can be implemented more easily than with printed work instructions.

Source:

Adient

Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™ (c) INDA
IDEA22 Ribbon Cutting
06.04.2022

IDEA® Achievement Award honorees

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

Organized by INDA, IDEA® also featured five essential nonwovens training classes; market presentations from China, Asia, Europe, North America and South America; industry recognitions with the IDEA® Achievement Awards and the IDEA® Lifetime Achievement Awards; and a welcome reception celebration.

Also, organized by INDA, FiltXPO™ featured five panels of global leaders in filtration and separation for the first-ever “Summit for Global Change,” discussing societal challenges such as indoor air quality, environmental sustainability, pandemic readiness, clean water, and filtration standards.  The event also featured a 1.5-day filter media training course, and sessions highlighting filter media market trends and filtration industry statistics.  

Exhibitors and attendees noted the welcome return to meeting face-to-face among industry senior leaders participating in the three-day event.

A highlight of IDEA® was the announcement of the IDEA® Achievement Awards by INDA, in partnership with Nonwovens Industry magazine. Moderated by Rousse and Karen McIntyre, Editor, Nonwovens Industry the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability, since the previous IDEA® Exposition in 2019.

In addition, INDA presented the IDEA® 2022 Lifetime Achievement Award to Val Hollingsworth, board chair and CEO of Hollingsworth & Vose, and Nonwovens Industry presented the IDEA® Entrepreneur Achievement Award to Doug Brown, president of Biax-Fiberfilm/5K Fibres at the event.

IDEA® 2022 Achievement Awards winners:

  • IDEA®  Equipment Achievement Award – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics, Inc.
  • IDEA®  Raw Material Achievement Award – ODOGard – Rem Brands, Inc.
  • IDEA® Short-Life Product Achievement Award – LifeSavers Wipes – LifeSavers LLC
  • IDEA® Long-Life Product Achievement Award – Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  • IDEA®  Sustainability Advancement Award – Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  • IDEA®  Nonwoven Product Achievement Award – HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  • IDEA®, the Preeminent Event for the Nonwovens & Engineered Fabrics Industry, will next be held on its new 24-month schedule on April 23-25, 2024 in Miami Beach, Florida.

 

Names of the IDEA® Achievement Award honorees pictured:

Row 1, Left to right:
IDEA® Long-Life Product Achievement Award winner, Jon Nichols, MANN + HUMMEL, GmbH and Dave Rousse – Nanofiber Cabin Air Filter – MANN + HUMMEL, GmbH
IDEA®  Nonwoven Product Achievement Award winners, Pramod Shanbhag, Suominen Corporation, Karen McIntyre, Nonwovens Industry Magazine, and Avinav Nandgaonkar, HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
Row 2, left to right:
IDEA® Short-Life Product Achievement Award winner, Georgia Crawford, LifeSavers Wipes – LifeSavers LLC, and Karen McIntyre, Nonwovens Industry Magazine
IDEA® 2022 Lifetime Achievement Award winner, Val Hollingsworth, Hollingsworth & Vose, and Dave Rousse, President, INDA
IDEA®  Equipment Achievement Award winners, Uwe Peregi, Dave Rousse, and Thomas Herrmann – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Row 3, left to right:
IDEA®  Raw Material Achievement Award winner, David Schneider, ODOGard – Rem Brands, Inc. and Dave Rousse, INDA
IDEA®  Sustainability Advancement Award winner, Chris Astley, and Karen McIntyre Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
IDEA® Entrepreneur Achievement Award winner, Doug Brown, Biax-Fiberfilm / 5K Fibres

14.03.2022

IDEA®22 Essentials of Nonwovens Training Courses

  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
14.03.2022

IDEA®22 with a Vital World View of Nonwovens

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Overview and Green Innovation Development of China’s Nonwovens Industry,  by Guimei Li, Vice President, China Nonwovens and Industrial Textiles Association (CNITA) on March 29
  • South America – Land of Opportunity or Land of Turbulence? The Recent History and Trends That Are Shaping the South American Nonwovens Market, presented by Mariana Mynarski, Corporate Marketing Manager, Fitesa on March 29
  • Asian Nonwovens Production and Market Update by Chan-Hyou Park, Chairman, Asia Nonwoven Fabrics Association (ANFA) on March 30
  • Understanding the State of the North American Nonwovens Industry and a Market Gone Mad presented by Brad Kalil, INDA Director of Market Intelligence and Economic Insights on March 31
  • An Overview of Key Issues Facing Nonwovens on Top of European Market Trends presented by Pierre Wiertz, General Manager, EDANA on March 31

IDEA® Award Presentations
Another conference highlight will be the presentation of the IDEA® 2022 Achievement Awards in partnership with Nonwovens Industry magazine, based on the results of online voting in six categories as well as the announcement of the first Sustainability Advancement Award on March 30.

IDEA® – the World’s Preeminent Event for the Nonwovens & Engineered Fabrics Industry – will feature several hundred exhibitors from a myriad of industry sectors and is expected to once again draw an audience of several thousand senior-level buyers and attendees from over 60 countries to the Miami Beach Convention Center. A welcome reception will be held to officially kick off the event on March 28.

IDEA®22 Essentials of Nonwovens Training Courses
Product developers, marketing managers, technical sales, support and other professionals can expand their industry-focused knowledge by attending the IDEA®22 Essentials of Nonwovens Training Courses.

This vital training program will provide an immersive dive into the latest nonwoven technologies, industry segments and more with courses on absorbent hygiene cores, making nonwovens, industrial wipes and consumer wipes.

A must-attend educational session on patent searching on March 31 will cover the latest major changes in patent searches on the United States Patent and Trademark Office (USPTO) website that has been updated to enhance user experience. 

More information:
IDEA IDEA® Achievement Award
Source:

IDEA

13.03.2022

JEC Group supports Composites Expert To launch E-learning Composites Academy

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

“One of JEC Group’s objectives is to develop access to education to help the composites industry to attract and train talented professionals. So, we are very proud to announce this partnership and to support Composites Expert initiatives, as joining common efforts and strategies will benefit to the overall industry”, stated Anne-Carole Barbarin, Content and Product development Director.

“The partnership with JEC Group is a major step towards the development of our training platform, while several manufacturers have already supported us, such as Arkema, Chomarat, Daher, Diatex, Pinette PEI, Porcher, Sopara, joining JEC World to officially launch our platform is an amazing opportunity.”, stated Jean-Pierre Cauchois, CEO Composites Expert.

These training sessions are targeting companies’ employees who would like to improve their expertise, to study professional reconversion, the companies who would like to know more or use composite materials, and universities and school for students to go from theory to practical exercises.

Source:

JEC Group

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector (c) JUMBO-Textil
Flexible fitness textiles: cords and cables by JUMBO-Textil
08.06.2021

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

Furthermore, non-elastic cords – depending on type and design – are essential as tension and connection elements for the functionality of fitness equipment. Textile components are often also an integral part of the equipment technology as fastening or fixing systems.

Source:

JUMBO-Textil / stotz-design.com

Kornit Digital Announces MAX Technology (c) Kornit Digital
26.04.2021

Kornit Digital Announces MAX Technology

Kornit Digital announced the release of its new MAX technology, establishing a new standard for on-demand fashion and apparel production.

A key feature of Kornit’s MAX technology is XDi, which delivers revolutionary 3D capabilities for new, high-density graphic decoration that can simulate embroidery, vinyl, and heat transfer in a single, waste-free digital process. The new XDi, which is based on Kornit’s patents, allows fulfillers and brands to expand their offerings to include new-to-market, innovative decorations without the inefficiencies and cost of operating analog technologies.

Kornit Digital announced the release of its new MAX technology, establishing a new standard for on-demand fashion and apparel production.

A key feature of Kornit’s MAX technology is XDi, which delivers revolutionary 3D capabilities for new, high-density graphic decoration that can simulate embroidery, vinyl, and heat transfer in a single, waste-free digital process. The new XDi, which is based on Kornit’s patents, allows fulfillers and brands to expand their offerings to include new-to-market, innovative decorations without the inefficiencies and cost of operating analog technologies.

Introducing Kornit Atlas MAX and ActiveLoad Automation
Kornit also debuted the ActiveLoad Automation technology, a new robotic system to significantly ease the burden of manual and labor-intensive media handling in the textile decoration industry. This increases total output per shift while ensuring minimal downtime and exceptional reliability. The new patent pending ActiveLoad Automation technology ensures continuous production and consistency, while decreasing human error and fatigue, regardless of employee experience and training, for ultimate results and best operational efficiency.

The first product with MAX technology is now commercially available in the Kornit Atlas MAX, a carbon-neutral, industrial-scale DTG production system, providing unsurpassed retail quality, exceptional color-matching capabilities, and a wide, vivid color gamut, with exceptional durability. The Atlas MAX is delivered with the new XDi technology built in, for 3D printing capabilities.

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe (c) Oerlikon
Daniel Günther (2nd from left), Schleswig-Holstein’s Minister President, together with Rainer Straub, Head of Oerlikon Nonwoven, Matthias Pilz, Head of Oerlikon Neumag, and Matthias Wäsch, Chairman of the Works Council, at the tour of the Neumünster site where the Oerlikon Nonwoven meltblown technology – currently in huge demand across the globe – is manufactured.
08.07.2020

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

In addition to a tour of the meltblown system and its assembly and production facilities, the visit by Minister President Daniel Günther had one purpose above all: the dialog between politicians and business. Rainer Straub, Head of Oerlikon Nonwoven, and Matthias Pilz, Head of Oerlikon Neumag, jointly expressed their thanks for the support that Oerlikon has repeatedly had the fortune to experience over the past months and years in Schleswig-Holstein and looked to the future full of hope. “As a result of our additional investment at the site here in Neumünster – be this in our new technology center that will be completed by the end of this year or in our new logistics center that is already operating – we, as one of the region’s largest employers, are continuing to move forward, supported by a State Government that is also focusing on both promoting industry and business and on advancing an efficient training and educational system, as innovation is only possible with outstanding engineers”, stated Matthias Pilz. And Rainer Straub directed his appeal specifically at the Minister President: “Treat education and training as a priority. Ultimately, they will secure the future of Schleswig-Holstein as a center of excellence and manufacturing!”

Five-million-euro digitalization program

Daniel Günther, the incumbent Minister President of Schleswig-Holstein since 2017, immediately responded, making reference to one of the Federal State’s current training initiatives: “The State Government is supporting higher education institutions and students in the present coronavirus crisis. With a five-million-euro digitalization program, we are investing on the long-term digitalization of our higher education institutions. With this, we are overall creating a future for young people, particularly also for those who could very well go on to invent the next generation of manmade fiber systems.” And the Minister President was just as impressed by the willingness and readiness with which Oerlikon has been providing high-level support since the beginning of the COVID-19 pandemic to master the present challenges as he was with the company’s meltblown technology itself. Rainer Straub explained: “When, at the beginning of the pandemic in February, demand for protective face masks increased rapidly, we at Oerlikon Nonwoven responded immediately. We ramped up all the available production capacities here in Neumünster in order to quickly manufacture nonwovens for producing face masks using our laboratory systems. As a result, we have been able to make a small, regional contribution to covering demand. In parallel, we have pulled out all the stops in order to systematically further expand our skills as machine and system builders so as to cater to the initially expected, and now also continuing, global demand for meltblown systems as quickly as possible.”

Leading meltblown technology

The Oerlikon Nonwoven meltblown technology – with which nonwovens for protective masks can also be manufactured, among other things – is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from plastic fibers. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Ever more manufacturers in the most diverse countries are hoping to become independent of imports. Therefore, what we are experiencing in Germany is also happening in both industrialized and emerging countries throughout the world”, commented Rainer Straub. In addition to China, Turkey, the United Kingdom, South Korea, Austria and numerous countries in both North and South America, Australia and not least Germany will for the first time also be among the countries to which Oerlikon Nonwoven will be delivering machines and equipment before the end of 2021.

Start of 3-years Interreg cross-border project AACOMA  is kicked-off (c) AMAC GmbH
AMAC-Standortkarte
13.05.2020

Start of 3-years Interreg cross-border project AACOMA is kicked-off

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

 

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
30.04.2020

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Hero Banner (c) EFI GmbH
Hero Banner
27.02.2020

Fashion Enter Closes UK's Skills Gap with EFI Optitex 3D

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 
To help lay the foundation for the UK's fashion and textile industry on its imminent journey towards digital transformation, FEL was determined to close the mounting skills gap in both industry and academia and offer UK professionals hands-on experience and exposure to 3D digital design tools. With a keen understanding of the market's growing need for speed, flexibility and shifting demands, in September 2019, FEL selected EFI Optitex as its 3D technology partner. FEL sought advanced 3D solutions that would enable innovative digital design courses, apprenticeships and bespoke training, including collaboration with leading fashion retailers such as Marks & Spencer®, ASOS, Next®, and many others.
 
After a short but highly intensive training period FEL implemented EFI Optitex 3D into its design and production processes, including pattern design and 3D tools for design and fitting. Since the recent implementation, FEL has already reaped the benefits of EFI Optitex 3D fully digital design, from sampling and grading, through to production. During a preliminary implementation phase, EFI Optitex 3D will enable FEL to deliver a wide range of accredited 3D design courses and forge collaborations with new customers, a result of EFI Optitex 3D's intuitive design tools, ease of use, and time and resource savings.

More information:
EFI Optitex
Source:

EFI GmbH

14.11.2018

Oerlikon Manmade Fibers Segment at the OpenStack Summit in Berlin

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

Source:

Oerlikon Marketing, Corporate Communications & Public Affairs

 

(c) BASF Venture Capital GmbH
06.11.2018

BASF invests in Chinese 3D printing specialist Prismlab

  • Unique, patented 3D printing process enables production of large-scale components
  • First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

  • Unique, patented 3D printing process enables production of large-scale components
  • First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

“China is transforming from a manufacturing-driven to an innovation-driven economy. This investment in Prismlab reflects our commitment to further expanding our innovation capabilities in China, and BASF Venture Capital plays an important role in helping us identifying potential partners that lead us to success,” said Dr. Zheng Daqing, BASF’s Senior Vice President, Business and Market Development Greater China.

“The 3D printing technology must continue to evolve before it is set to change the world. At Prismlab, we aim to spearhead and accelerate that change by providing solutions through specialized customization. The investment allows us to stay laser-focused on our R&D capability, a key factor to achieve that goal,” said Mr. Hou Feng, Founder and Chairman of Prismlab.

Prismlab has developed a patented 3D printing process, “Pixel Resolution Enhanced Technology”, based on stereolithography (SLA). SLA allows comparatively large components to be produced using light-curing resins. Prismlab’s technology increases the printing resolution without compromising printing speed. In order to increase the amount of energy brought into a pixel, Prismlab’s technology divides each pixel in the resin into several small sections, which can be cured individually by exposure to LCD light. This makes the energy input into each pixel significantly higher than similar processes that expose each pixel to light once. This allows comparatively large and stable components or numerous parts to be printed in the same production step. With the use of LCD light, it also reduces process costs. This advantage opens opportunities in the footwear and furniture industry.

Along with this patented process, Prismlab also markets 3D printers and other related services. The Prismlab technology can be used in various key customer applications, including invisible braces, and anatomical models for medical, and education and training purposes.

SLA uses a laser for layer-by-layer curing of a photopolymer solution to shape the required workpiece. SLA and LCD based printing processes determinate the size, stability, and usability of the components to be produced as they are limited by the size of the light spot and the intensity of the light.

More information:
BASF prismlab
Source:

BASF Venture Capital GmbH

27.06.2018

ROICA™ Infuses Eco-Smart Technology into High Performance Stretch at EUROBIKE on July 9th 2018

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ will go the distance as they join this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? will be held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel will lead the way, as they share their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ will go the distance as they join this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? will be held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel will lead the way, as they share their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks. Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity.

More information:
EUROBIKE cycling industry ROICA™
Source:

GB Network