From the Sector

Reset
3 results
01.07.2022

Award for best master's thesis of the German Textile Mechanical Engineering 2022 goes to young engineer of ITA Aachen

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The subject of the master's thesis was the development of a mechanism with which faulty sections in the weft yarn can be sorted out before they are woven into the textile. This way, both yarn-related weft defects and material defects can be drastically reduced. The prototype developed by Mr Zerbes shows how this can be done even during the ongoing weaving process without having to stop production. Due to its modular design, the yarn rejection unit can be retrofitted to many different types of air-jet weaving machines, which represents an enormous savings potential not only in Germany but in weaving mills all over the world.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

(c) ITM TUD
24.06.2022

VDMA verleiht Nachhaltigkeitspreise an Ingenieurnachwuchs am ITM

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 
Im Fokus stand ein Verfahren zur textilchemischen Ausrüstung von Garn- und Gewebematerialien aus nachwachsenden Rohstoffen mit Cyclodextrinen, die Mikro- und Nanoplastik (MNP) anbinden. Die grundlegenden Erkenntnisse zeigen dabei das Potenzial daraus hergestellter faserbasierter Filter zur deutlichen und nachhaltigen Minimierung der MNP-Belastung, sowohl von lokalen Trinkwasserquellen bis hin zu globalen Wasserkreisläufen, auf. Die Masterarbeit beinhaltet erstmals die innovative Anwendung von Cyclodextrinmolekülen zur Anbindung kleinster Plastikpartikel unterschiedlicher Form und molekularer Zusammensetzung.
 
Simon Hoebel erhielt den mit 3.000 EUR dotierten Nachhaltigkeitspreis „Beste Forschungsarbeit des Deutschen Textilmaschinenbaues 2022“ über die „Weiterentwicklung des Versuchstandes zur Herstellung von flexiblen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern und Thermoplastfasern für hochbelastbare thermoplastische Verbundbauteile“.
 
Das Ziel der prämierten Forschungsarbeit bestand in der Weiterentwicklung eines Versuchstandes sowie eines anwendungsbezogenen technologischen Knowhows zur Entwicklung und Fertigung von unidirektionalen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern (rCF) und Thermoplastfasern (TFS) für hochbelastbare thermoplastische CFK-Bauteile. Im Rahmen der Forschungsarbeit untersuchte Hoebel den gesamten Prozess zur Herstellung von hochdrapierbaren Thermoplastfaserbandstrukturen von der Kardierung, Verstreckung, Banddoublierung und Konsolidierung. Aus den entwickelten rCF-TFS wurden thermoplastische UD-Verbunde gefertigt und ihre mechanischen Eigenschaften charakterisiert. Die Ergebnisse der Studienarbeit zeigen das Potenzial dieser neuartigen Prozesskette und der darauf basierenden leistungsfähigen und nachhaltigen Thermoplastfaserbandstrukturen auf Basis von rCF.

Source:

Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

(c) VDMA. Caption from left to right: Eric Otto, Prof. Thomas Gries, M.Sc. Susanne Fischer, Prof. Klaus Meier, Dr. Benjamin Weise, Prof. Gunnar Seide, Alon Tal, Jan Merlin Abram, Peter D. Dornier
25.09.2018

VDMA Textile Machinery c/o Walter Reiners Foundation awards five young engineers with a total of 17,500 EURO

Peter D. Dornier, member of the Executive Board of the VDMA Textile Machinery Federation and Chairman of the Walter Reiners Foundation for the Promotion of Young Engineers, honours five young talents. Numerous entrepreneurs and managers from the German textile machinery industry took part in the award ceremony at the Digital Capability Center (DCC) in Aachen, Germany.

The prizewinner in the dissertation category, Dr.- Ing. Benjamin Weise, comes from the Institute of Textile Technology at RWTH Aachen University (ITA). He has dealt with a complex production process for the manufacture of modified multifilament yarns, which offers new perspectives for the development and manufacture of textile charge carriers.

Peter D. Dornier, member of the Executive Board of the VDMA Textile Machinery Federation and Chairman of the Walter Reiners Foundation for the Promotion of Young Engineers, honours five young talents. Numerous entrepreneurs and managers from the German textile machinery industry took part in the award ceremony at the Digital Capability Center (DCC) in Aachen, Germany.

The prizewinner in the dissertation category, Dr.- Ing. Benjamin Weise, comes from the Institute of Textile Technology at RWTH Aachen University (ITA). He has dealt with a complex production process for the manufacture of modified multifilament yarns, which offers new perspectives for the development and manufacture of textile charge carriers.

M.Sc. Susanne Fischer, winner of the Master's thesis category, has systematically and comprehensively solved the challenging task of integrating motion sensors into a finger glove at Reutlingen University.
The 2018 creativity award winners are team Mr. Jan Merlin Abram and Mr. Alon Tal from ITA Aachen as well as Mr. Eric Otto from the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) in Dresden. The students Abram and Tal have developed a guideline for the design of hybrid morphing textiles. In addition to the classic functions in conventional and, in particular, composite applications, locally defined, functionally effective joint, torsion, expansion and compression mechanisms can be integrated into the textile.

The prizewinner Otto is awarded for a concept study for the development of a circular knitting machine with a variable diameter needle cylinder, which can lead to further flexibility in the circular knitting process.

More information:
VDMA Walter-Reiners-Stiftung
Source:

VDMA
Textilmaschinen