From the Sector

Reset
10 results
22.09.2023

Lectra: New President of the Asia-Pacific region

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, announces the appointment of Frédéric Morel as President of the Asia-Pacific region and as a member of the Group's Executive Committee, where he replaces Edward Wang, who previously held the same position. This nomination comes as Lectra prepares to present its latest software and connected equipment offers at the CISMA (China International Sewing Machinery and Accessories) trade show in Shanghai, China, to enable Asian industry players to accelerate their transition to Industry 4.0.

Lectra's presence in the Asia-Pacific region began in 1985 with the opening of its first office in Japan. Today, Lectra employs 16% of its workforce in the region, which accounted for 25% of the Group's revenues in 2022. Thanks to its dynamism, economic fabric and position in world trade, China is a key market in this region, generating 9% of Lectra’s revenues in 2022.

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, announces the appointment of Frédéric Morel as President of the Asia-Pacific region and as a member of the Group's Executive Committee, where he replaces Edward Wang, who previously held the same position. This nomination comes as Lectra prepares to present its latest software and connected equipment offers at the CISMA (China International Sewing Machinery and Accessories) trade show in Shanghai, China, to enable Asian industry players to accelerate their transition to Industry 4.0.

Lectra's presence in the Asia-Pacific region began in 1985 with the opening of its first office in Japan. Today, Lectra employs 16% of its workforce in the region, which accounted for 25% of the Group's revenues in 2022. Thanks to its dynamism, economic fabric and position in world trade, China is a key market in this region, generating 9% of Lectra’s revenues in 2022.

Prior to joining Lectra, Frédéric Morel held the position of South East Asia & Pacific Executive Vice President at Vallourec. He had previously been appointed Sales Director and then Sales Vice President for Vallourec in the Middle East, after holding various sales and general management positions for the company in the Asia region. A graduate of the Institut d'Etudes Politiques d'Aix-en-Provence and the EMLYON business school, Frédéric Morel began his career in 2000 with Saint-Gobain.

More information:
Lectra, PLM Asia
Source:

LECTRA

10.05.2023

Karine Calvet and Pierre-Yves Roussel join Lectra’s Board of Directors

Lectra’s Annual Shareholders’ Meeting held on April 28 appointed two new Directors, Karine Calvet and Pierre-Yves Roussel for a four-year term. They both will become members of the Strategic Committee, replacing Bernard Jourdan, Lead Director, and Anne Binder. Karine Calvet also becomes a member of the Corporate Social Responsibility (CSR) Committee.

With its new strategic roadmap for 2023-2025, the Group aims to use its expansion – mainly due to the acquisition of Gerber in June 2021 – to accelerate its growth, significantly increase the share of SaaS in its sales, and seize opportunities for external growth. Supported by the commitment of its staff and recognized by its customers, Lectra will also be at the forefront of a more sustainable future.

Lectra’s Annual Shareholders’ Meeting held on April 28 appointed two new Directors, Karine Calvet and Pierre-Yves Roussel for a four-year term. They both will become members of the Strategic Committee, replacing Bernard Jourdan, Lead Director, and Anne Binder. Karine Calvet also becomes a member of the Corporate Social Responsibility (CSR) Committee.

With its new strategic roadmap for 2023-2025, the Group aims to use its expansion – mainly due to the acquisition of Gerber in June 2021 – to accelerate its growth, significantly increase the share of SaaS in its sales, and seize opportunities for external growth. Supported by the commitment of its staff and recognized by its customers, Lectra will also be at the forefront of a more sustainable future.

Karine Calvet is Vice-President EMEA responsible for Partners at AVEVA, a subsidiary of Schneider Electric. She began her career at CGI in 1993 and has spent most of it in IT: sixteen years in services companies, seven years in telecommunications, and six years in software. She has had leadership roles in telecommunications environments for leading global companies (CGI, Capgemini, Alcatel-Lucent, Verizon, Microsoft and currently Schneider-Aveva), focusing on digital transformation. Karine Calvet served as Head of Industry at Capgemini, then managed worldwide teams at Alcatel-Lucent as Vice-President, Eastern Europe then at Verizon as Managing Director. Her time at Microsoft strengthened her software expertise, her direct and indirect channels skills, and her experience in IT services. In the last two years, as Vice-President, Southern Europe then Vice-President, Partners and Alliances at Schneider-Aveva, Karine Calvet has worked closely with industrial companies to help them meet the challenges of operational efficiency, safety, cost management, sustainability and decarbonization by taking advantage of digitalization.

Pierre-Yves Roussel has been CEO of leading US fashion label Tory Burch since January 2019. He began his career in investment banking with HSBC in Brussels, then at Morgan Stanley in London. In 1990, he joined management consulting firm McKinsey & Company in France, where he led numerous consultancy assignments in the fashion, luxury, distribution and media sectors in Europe and Asia. In 1998, he was elected Partner then, in 2004, Global Senior Partner (Director). In 2004, he joined the LVMH Group Executive Committee as Executive Vice-President, Strategy and Operations, reporting directly to Bernard Arnault. In 2006, he was appointed Chairman and CEO of LVMH Fashion Group, one of the LVMH Group’s five branches of operational activity. From 2006 to 2018, he was Chairman of the Board of the brands Céline, Givenchy, Loewe, Kenzo, Pucci, Rossimoda, Marc Jacobs, Donna Karan, Berluti, JW Anderson and Nicolas Kirkwood. He has also been a member on several prestigious fashion juries including Andam, CFDA Fashion Incubator, and the LVMH Fashion Prize. He was a member of the management committee of the Chambre Syndicale de la Mode et de la Couture from 2010 to 2018. In 2018, he left the LVMH Group to take up the post of CEO – based in New York – of the company Tory Burch. Founded by his wife in 2004, the private family-run company has more than 350 stores worldwide, 13 retail websites, and nearly 5,000 employees.

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

PCMC names Steven Charapata as Aftermarket Sales Executive-Controls Obsolescence (c) PCMC
In his new role, Steven Charapata will work with customers to develop a controls obsolescence strategy that minimize risks, downtime and expenditures.
24.06.2021

PCMC names Steven Charapata as Aftermarket Sales Executive-Controls Obsolescence

  • Experienced leader will work with customers to develop controls obsolescence strategies

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a leading supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bagconverting industries worldwide—is pleased to announce that Steven Charapata has accepted the position of Aftermarket Sales Executive, specializing in controls obsolescence upgrades.

In his new role, Charapata will work with customers to develop a controls obsolescence strategy by identifying and prioritizing equipment, developing a plan, and proposing solutions that can provide a phased approach to manage risk, downtime and capital expenditures. Charapata has more than 20 years of experience updating obsolete controls systems on PCMC machines and other converting equipment. He joins PCMC from Zepnick Solutions Inc., where he was a controls obsolescence Project Leader.

  • Experienced leader will work with customers to develop controls obsolescence strategies

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a leading supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bagconverting industries worldwide—is pleased to announce that Steven Charapata has accepted the position of Aftermarket Sales Executive, specializing in controls obsolescence upgrades.

In his new role, Charapata will work with customers to develop a controls obsolescence strategy by identifying and prioritizing equipment, developing a plan, and proposing solutions that can provide a phased approach to manage risk, downtime and capital expenditures. Charapata has more than 20 years of experience updating obsolete controls systems on PCMC machines and other converting equipment. He joins PCMC from Zepnick Solutions Inc., where he was a controls obsolescence Project Leader.

“Steve’s expertise and extensive controls experience will be assets for our customers,” said Joe Schuh, Aftermarket Sales Director. “Complete controls upgrades can be overwhelming. Steve will work with our customers to create a comprehensive, effective and well thought-out plan that will minimize their risks and downtime. He brings a unique understanding of controls systems, hardware and software design, and capital equipment. We’re thrilled to have him join our team.”

ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich © ITM/TU Dresden
Draping properties - variety of materials
01.02.2021

ITM presents itself for the first time at ISPO Munich Online 2021

  • ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich
  • ISPO Munich Online 2021 – the world´s leading sports business platform from February 1st to 5th 2021

The Chair of Assembly Technology for Textile Products of ITM presents itself for the first time at ISPO Munich Online 2021 – showcasing its expertise in the field of virtual product development. Its know-how in the determination of material parameters, digital data processing, and data transfer will be presented as well as its competencies in 3D/4D body shape recording via scanning, data animation for the 3D product development for functional clothing, and simulation for wear comfort/usage visualization. The Chair of Assembly Technology for Textile Products of ITM has manifested its leading global position in the virtual product development sector by successfully completing a variety of national and international interdisciplinary research projects.

  • ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich
  • ISPO Munich Online 2021 – the world´s leading sports business platform from February 1st to 5th 2021

The Chair of Assembly Technology for Textile Products of ITM presents itself for the first time at ISPO Munich Online 2021 – showcasing its expertise in the field of virtual product development. Its know-how in the determination of material parameters, digital data processing, and data transfer will be presented as well as its competencies in 3D/4D body shape recording via scanning, data animation for the 3D product development for functional clothing, and simulation for wear comfort/usage visualization. The Chair of Assembly Technology for Textile Products of ITM has manifested its leading global position in the virtual product development sector by successfully completing a variety of national and international interdisciplinary research projects.

Researchers of the Chair of Assembly Technology for Textile Products have been actively involved in the preparation and digital representation of material samples for the ISPO Textrends Forum. Thus, the material parameters of the ISPO Textrends Award textiles were determined for 3D fit simulations in Vidya (Assyst/Vizoo), automatically analyzed, and digitally processed by the specially developed "Material Analyzer" software. This software in addition to other state-of-the-art CAE infrastructure, such as the recently installed 4D Scanner Move4D, are essential for the further establishment and promotion of its leading position in the field of digitalization and virtual product development for garments for high-tech applications.

The researchers involved eagerly await future collaborations in this promising field of research. This pilot project presented at ISPO 2021 was coordinated by the company FOURSOURCE Group GmbH, thus enabling the characterization and 3D visualization of the award-winning materials that are presented to all visitors at ISPO 2021.

Tonello presents collection designed by Piero Turk © Tonello
Sustainable denim collection by Piero Turk
26.10.2020

Tonello presents collection designed by Piero Turk

The collaboration between Tonello and denim designer Piero Turk gave birth to a sustainable denim collection, result of a combination of the latest responsible technologies, and created with the most eco-friendly fabrics selected by The Kingpins Show.

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability,” said Alice Tonello, R&D and Marketing Director of Tonello.

18 exclusive and contemporary denim pieces, result of the premium experience of Piero Turk, and Tonello with its new brand-new finishing process: The Laundry (R )Evolution.

This is a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Finally we use Metro, our software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

The collaboration between Tonello and denim designer Piero Turk gave birth to a sustainable denim collection, result of a combination of the latest responsible technologies, and created with the most eco-friendly fabrics selected by The Kingpins Show.

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability,” said Alice Tonello, R&D and Marketing Director of Tonello.

18 exclusive and contemporary denim pieces, result of the premium experience of Piero Turk, and Tonello with its new brand-new finishing process: The Laundry (R )Evolution.

This is a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Finally we use Metro, our software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

The All-in-One System performs all washing operations by integrating 4 sustainable technologies into a single machine: ECOfree 2, which uses ozone in both the water and air; NoStone® for authentic and pumice-free stone-wash effects; UP, for washing processes with at least 50% less water; Core, a nebulizing system improving performance and reducing water consumption.

As a result of The Laundry (R )Evolution, Tonello developed two innovative and patent-pending processes: OBleach and Wake.

OBleach is the new Tonello process, which, by using only ozone, “returns to the future” with an authentic, sustainable and cool Bleach. Without chemicals.
This is possible thanks to a combination of the technologies part of our All-In-One System.
In short, the real Bleach without Bleach has finally arrived. And this in the year of the total ban of permanganate too.

Wake is the first totally natural dyeing system that uses only plants and biodegradable vegetable waste like flowers, berries and roots, without harmful chemicals additives.

The capsule collection will be displayed at KINGPINS24 on October 27th during the seminar held by Alice Tonello and Piero Turk.

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

VDMA: Mask production: Nothing runs without textile machinery (c) VDMA Textilmaschinen
21.07.2020

VDMA: Mask production: Nothing runs without textile machinery

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

Source:

VDMA Textilmaschinen

(c) TMAS
26.04.2019

Innovate or die: TMAS at ITMA 2019

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

More information:
TMAS ITMA 2019
Source:

Issued on behalf of TMAS by AWOL Media.

Holger Max-Lang, neuer Geschäftsführer Lectra Deutschland. © Lectra Deutschland GmbH
Holger Max-Lang, neuer Geschäftsführer Lectra Deutschland.
23.01.2018

Lectra Germany appoints Holger Max-Lang as Managing Director

Lectra, the technological partner for companies using fabrics and leather, is pleased to announce the appointment of Holger Max-Lang as Managing Director of Lectra Central & Eastern Europe region, Russia. Holger Max-Lang is based in Ismaning, near Munich, Germany.

Central & Eastern Europe and Russia is a strategic region for Lectra, offering strong potential in the Group’s main market sectors thanks to: a robust automotive industry; a dynamic furniture industry, especially in Germany and Poland; and a close connection between fashion brands in Germany, Austria, Switzerland and suppliers in Eastern Europe.

Holger Max-Lang will focus on delivering Lectra’s customer-focused strategy to empower fashion & apparel, automotive and furniture businesses to succeed as they embrace Industry 4.0. Anchored in the digitalization of industrial processes, from design to production, Industry 4.0 is redefining how factories are organized; smart and connected, they are driving the value chain, propelling a new digitalized lifecycle for products. 

Lectra, the technological partner for companies using fabrics and leather, is pleased to announce the appointment of Holger Max-Lang as Managing Director of Lectra Central & Eastern Europe region, Russia. Holger Max-Lang is based in Ismaning, near Munich, Germany.

Central & Eastern Europe and Russia is a strategic region for Lectra, offering strong potential in the Group’s main market sectors thanks to: a robust automotive industry; a dynamic furniture industry, especially in Germany and Poland; and a close connection between fashion brands in Germany, Austria, Switzerland and suppliers in Eastern Europe.

Holger Max-Lang will focus on delivering Lectra’s customer-focused strategy to empower fashion & apparel, automotive and furniture businesses to succeed as they embrace Industry 4.0. Anchored in the digitalization of industrial processes, from design to production, Industry 4.0 is redefining how factories are organized; smart and connected, they are driving the value chain, propelling a new digitalized lifecycle for products. 

“The transformation to Industry 4.0 is in full swing: the Industrial Internet of Things, Software as a Service (SaaS), cloud technology, data analyses and data exploitation have become key,” underlines Daniel Harari, Chairman and Chief Executive Officer, Lectra. “Working for Lectra for over 15 years, Holger has a deep experience and knowledge of Lectra’s DNA, and is in a very strong position to support our customers in the digitalization of their processes.”

“Industry 4.0. started in Germany. Therefore, many companies are keen to adopt its principles in our region. Lectra is very well-positioned to support our customers in their transformation,“ says Holger Max-Lang.In my role, I am looking forward to a growing dialogue with our customers and prospects, to bring them a full understanding of the expertise we have built - and are building. We will leverage this expertise to boost our customers’ competitiveness and generate higher added-value for their businesses.”

Following marketing and sales positions in the IT and automotive industry sectors, Holger joined Lectra Germany in September 2002 as a salesperson for automotive accounts. He then held diverse sales’ roles in the region, including the position of Sales Manager for all Lectra markets in Central & Eastern Europe region, Russia. Since September 2017 Holger has held the role of Business Development Director, Automotive, with the responsibility to develop the leather cutting activity worldwide.

Source:

Lectra Deutschland GmbH