From the Sector

Reset
145 results
(c) Kornit Digital
30.06.2023

Kornit Digital and Amaze Software: On-Demand Production and Fulfillment to Social Media Creators

Kornit Digital LTD. announced Amaze Software, Inc. – parent company of the Amaze, Spring, and Outfts platforms – has selected KornitX Workflow Solutions and Kornit MAX digital on- demand fabric and textile decoration technologies as the platform to deliver their vision. Combined with the Amaze Creator Commerce Platform, the companies will jointly bring the power of on- demand production and fulfillment to new and existing social media creators, enabling them to better monetize branded products.

Kornit’s Global Fulfillment Network helps companies like Amaze Software connect creators with high-quality garment and textile production fulfillers across the globe. The platform is backed by the KornitX workflow engine, seamlessly integrating across industry-proven Kornit MAX technology- based fabric and textile decoration systems for end-to-end production, visibility, and control.

Kornit Digital LTD. announced Amaze Software, Inc. – parent company of the Amaze, Spring, and Outfts platforms – has selected KornitX Workflow Solutions and Kornit MAX digital on- demand fabric and textile decoration technologies as the platform to deliver their vision. Combined with the Amaze Creator Commerce Platform, the companies will jointly bring the power of on- demand production and fulfillment to new and existing social media creators, enabling them to better monetize branded products.

Kornit’s Global Fulfillment Network helps companies like Amaze Software connect creators with high-quality garment and textile production fulfillers across the globe. The platform is backed by the KornitX workflow engine, seamlessly integrating across industry-proven Kornit MAX technology- based fabric and textile decoration systems for end-to-end production, visibility, and control.

The  Spring platform offers an opportunity for fans to make purchases directly from where they consume the creator’s content (social platforms including Instagram, TikTok Shops, Twitch, and more). This allows creators to significantly enhance engagement and cultivate a more profound brand presence.

Source:

Kornit Digital

28.06.2023

Lectra joins United Nations Global Compact and presents CSR policy

Lectra supports the transformation of fashion, automotive and furniture companies by providing them with technological solutions that accelerate their transition to a more efficient and more sustainable Industry 4.0. In February, as part of the launch of its new roadmap, Lectra confirmed the importance of CSR in its strategy and presented its new priority measures for 2023-2025. By joining the UN Global Compact, Lectra demonstrates its commitment to reaching the Sustainable Development Goals of the United Nations.

Over the last few years, Lectra has stepped up its CSR initiatives. In 2011, the company implemented a CSR purchasing charter that covered 98% of its industrial purchases in 2022, excluding Gerber Technology (which was acquired in June 2021). In 2023, the new version of our CSR purchasing charter will be extended to Gerber suppliers, with the objective of enrolling 90% of all our industrial suppliers by 2025. Lectra also favors local procurement and production, as demonstrated by the recent inauguration of its manufacturing facility in Tolland, United States.

Lectra supports the transformation of fashion, automotive and furniture companies by providing them with technological solutions that accelerate their transition to a more efficient and more sustainable Industry 4.0. In February, as part of the launch of its new roadmap, Lectra confirmed the importance of CSR in its strategy and presented its new priority measures for 2023-2025. By joining the UN Global Compact, Lectra demonstrates its commitment to reaching the Sustainable Development Goals of the United Nations.

Over the last few years, Lectra has stepped up its CSR initiatives. In 2011, the company implemented a CSR purchasing charter that covered 98% of its industrial purchases in 2022, excluding Gerber Technology (which was acquired in June 2021). In 2023, the new version of our CSR purchasing charter will be extended to Gerber suppliers, with the objective of enrolling 90% of all our industrial suppliers by 2025. Lectra also favors local procurement and production, as demonstrated by the recent inauguration of its manufacturing facility in Tolland, United States.

Another example: knowing that textiles generate 90% of the CO2 emissions produced during the total lifecycle of a cutting room, Lectra strives to offer its customers solutions that optimize the use of materials. Lectra's equipment makes it possible to achieve material saving of 5 to 10%. In addition, to better inform consumers about product authenticity and provenant, the company has also expanded its software offer to material traceability, as show by the recent majority acquisition of TextileGenesis’ capital. Lectra is committed to systematically using eco-design principles by 2025 for its new equipment platforms in order to reduce its environmental footprint.

For 2023-2025, Lectra has decided to focus on 5 key areas through 12 measures:

  1. MEETING THE HIGHEST ETHICAL STANDARDS
    - Uncompromising business ethics
    - Extension of our CSR purchasing policy
  2. DESIGNING ECO-RESPONSIBLE OFFERS
    - Developing eco-designed products and services
    - Supplying products and services that help reduce our customers’ impact on the environment
    - Developing safe, accessible and easy-to-use solutions
  3. FOSTERING AN INCLUSIVE, DIVERSE AND STIMULATING WORKING CULTURE
    - Zero tolerance for discrimination and harassment and equal opportunities for everyone
    - A working environment conducive to employee engagement
    - Balance between work and private life
    - Sustainable development of talents, team expertise and professional careers
    - Employees’ health and safety
  4. REDUCING THE ENVIRONMENTAL FOOTPRINT OF OUR ACTIVITIES
    - Reducing the environmental impact of our company's activities
  5. SUPPORTING FUTURE GENERATIONS
    - Supporting the development of professional skills and the employability of future generations
Source:

Lectra

STOLL's book “Color in Knitting: By Designers, for Designers”. (c) STOLL by KARL MAYER
23.06.2023

Launch of STOLL's latest collection COLOR IN KNITTING

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Just in time for ITMA 2023 in Milan, the flat knitting machine manufacturer STOLL has launched its new collection COLOR IN KNITTING. It holds a range of knitting techniques that were ideated for novel super fine machine gauges such as the E20.

In addition, STOLL reveals its internal design workflow, showcasing how digital software tools can speed up the design process. The core of this is k.innovation CREATE DESIGN. Through the utilization of STOLL’s jointly developed design software solution, k.innovation CREATE DESIGN, in collaboration with @KM.ON, the shape and structures of a garment, can be digitally created, allowing for its simulation before it is even knitted. The interfaces to various external 3D software tools, allow for a realistic representation of the garment facilitating faster design decisions. Once the virtual knits, made in the CREATE DESIGN software are ready for manufacturing, it will be send to a knitting technician for further processing in k.innovation CREATE PLUS, This significantly speeds up product development while reducing communication issues between designers and technicians.

Sustainability and responsible handling of precious natural resources were key factors driving the development of the latest trend collection, COLOR IN KNITTING. STOLL-knit and wear®, a technique that stands for seamless knitted garments, can play a significant role in reducing waste. In addition, fewer process steps are required in the production chain - with advantages for production efficiency.
For another highlight of COLOR IN KNITTING, the STOLL creatives have worked on imitating different yarn effects with knitting technology such as slub yarn optics or the simulation of fabrics like crepe de chine/crepe georgette

On the occasion of the 150th anniversary of STOLL, COLOR IN KNITTING features a selection of vintage pattern replicates. These patterns can be found in STOLL’s extensive sample archives in Reutlingen. It is impressive to learn that all these former fabric constructions can still be replicated today and also reinvented with todays machine features. This approach showcases the steep progression of technical advancements over the past 150 years.

STOLL´s latest trend collection culminates in the creation of an invaluable resource: the book “Color in Knitting: By Designers, for Designers”. This publication aims to cater to a diverse audience by presenting a comprehensive guide to designing with colors using various flat knitting technologies and will be presented in the chapter "Book release".

Source:

STOLL by KARL MAYER

09.06.2023

EFI Reggiani showcases its innovations at ITMA 2023

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

The EFI Reggiani ecoTERRA solution is an all-in-one solution for water-based pigment printing that requires no ancillary equipment for pre- and post-treatment. By reducing water, energy and chemicals consumption in the overall process, customers can now obtain a sustainable, direct-to-fabric printing solution. For the first time at ITMA, EFI Reggiani is presenting its full ecoTERRA line up of four models, including a 340 printing width, with speeds ranging from 150 to 600 sqm/hour. This allows customers to choose the best TCO/ROI based on output volume and speed range.
 
Reggiani ecoTERRA water-based pigment inks deliver excellent wet and dry fastness properties, sharpness in detail, and durability while also ensuring printhead longevity with reduced maintenance costs. Thanks to the enhanced polymerisation and finishing unit, EFI Reggiani ecoTERRA also provides an enhanced tactile experience and fabric softness.
 
In addition to highlighting EFI Reggiani’s sustainable product offering, the company will also demonstrate the significant productivity and efficiency advantages offered by its portfolio of high-speed, high-performance digital textile printers at ITMA 2023. Attendees will discover how mass production can transition to a digital, on-demand workflow with the high speeds and high print quality of the EFI Reggiani HYPER scanning printer and the next-generation EFI Reggiani BOLT XS single-pass textile printer.

Visitors to the booth also will see EFI Reggiani’s new proprietary end-to-end digital printing workflow and the latest enhancements to EFI Inèdit digital textile software. Inèdit, now part of EFI Reggiani, is one of the leading developers of raster image processors (RIPs) and related software for digital industrial textile printing. The EFI Reggiani end-to-end workflow with Inèdit integration boosts productivity and production capabilities for digital textile print operations while ensuring maximum security for customer’s designs thanks to two-level encryption.
 
EFI Reggiani QUERY, the user-friendly, advanced data analysis tool to measure printer performance, keep track of real costs per metre, and monitor water and energy consumption, will also be demonstrated.

(c) SHIMA SEIKI MFG., LTD.
24.05.2023

SHIMA SEIKI at ITMA 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

Of the 9 knitting machines SHIMA SEIKI is exhibiting, 8 machines will be part of the Next-Generation lineup, ranging from WHOLEGARMENT® knitting machines and computerized flat knitting machines to glove knitting machines. More than 300 items will be on display as proposals for knitted applications in various fields ranging from fashion, sports, shoes, bags and accessories to medical, safety, automotive, aeronautical and other wearable and industrial textile applications.

In addition to machine technology, SHIMA SEIKI's SDS-ONE APEX series computer graphic design system and software will be shown with their latest software upgrades that feature significant improvements in knit programming, 3D functions and speed. Demonstrations will be available for a comprehensive fashion tech solutions package based on realistic virtual sampling and supported by various digital solutions and web services.

More information:
Shima Seiki ITMA 2023 ITMA
Source:

SHIMA SEIKI MFG., LTD.

10.05.2023

Karine Calvet and Pierre-Yves Roussel join Lectra’s Board of Directors

Lectra’s Annual Shareholders’ Meeting held on April 28 appointed two new Directors, Karine Calvet and Pierre-Yves Roussel for a four-year term. They both will become members of the Strategic Committee, replacing Bernard Jourdan, Lead Director, and Anne Binder. Karine Calvet also becomes a member of the Corporate Social Responsibility (CSR) Committee.

With its new strategic roadmap for 2023-2025, the Group aims to use its expansion – mainly due to the acquisition of Gerber in June 2021 – to accelerate its growth, significantly increase the share of SaaS in its sales, and seize opportunities for external growth. Supported by the commitment of its staff and recognized by its customers, Lectra will also be at the forefront of a more sustainable future.

Lectra’s Annual Shareholders’ Meeting held on April 28 appointed two new Directors, Karine Calvet and Pierre-Yves Roussel for a four-year term. They both will become members of the Strategic Committee, replacing Bernard Jourdan, Lead Director, and Anne Binder. Karine Calvet also becomes a member of the Corporate Social Responsibility (CSR) Committee.

With its new strategic roadmap for 2023-2025, the Group aims to use its expansion – mainly due to the acquisition of Gerber in June 2021 – to accelerate its growth, significantly increase the share of SaaS in its sales, and seize opportunities for external growth. Supported by the commitment of its staff and recognized by its customers, Lectra will also be at the forefront of a more sustainable future.

Karine Calvet is Vice-President EMEA responsible for Partners at AVEVA, a subsidiary of Schneider Electric. She began her career at CGI in 1993 and has spent most of it in IT: sixteen years in services companies, seven years in telecommunications, and six years in software. She has had leadership roles in telecommunications environments for leading global companies (CGI, Capgemini, Alcatel-Lucent, Verizon, Microsoft and currently Schneider-Aveva), focusing on digital transformation. Karine Calvet served as Head of Industry at Capgemini, then managed worldwide teams at Alcatel-Lucent as Vice-President, Eastern Europe then at Verizon as Managing Director. Her time at Microsoft strengthened her software expertise, her direct and indirect channels skills, and her experience in IT services. In the last two years, as Vice-President, Southern Europe then Vice-President, Partners and Alliances at Schneider-Aveva, Karine Calvet has worked closely with industrial companies to help them meet the challenges of operational efficiency, safety, cost management, sustainability and decarbonization by taking advantage of digitalization.

Pierre-Yves Roussel has been CEO of leading US fashion label Tory Burch since January 2019. He began his career in investment banking with HSBC in Brussels, then at Morgan Stanley in London. In 1990, he joined management consulting firm McKinsey & Company in France, where he led numerous consultancy assignments in the fashion, luxury, distribution and media sectors in Europe and Asia. In 1998, he was elected Partner then, in 2004, Global Senior Partner (Director). In 2004, he joined the LVMH Group Executive Committee as Executive Vice-President, Strategy and Operations, reporting directly to Bernard Arnault. In 2006, he was appointed Chairman and CEO of LVMH Fashion Group, one of the LVMH Group’s five branches of operational activity. From 2006 to 2018, he was Chairman of the Board of the brands Céline, Givenchy, Loewe, Kenzo, Pucci, Rossimoda, Marc Jacobs, Donna Karan, Berluti, JW Anderson and Nicolas Kirkwood. He has also been a member on several prestigious fashion juries including Andam, CFDA Fashion Incubator, and the LVMH Fashion Prize. He was a member of the management committee of the Chambre Syndicale de la Mode et de la Couture from 2010 to 2018. In 2018, he left the LVMH Group to take up the post of CEO – based in New York – of the company Tory Burch. Founded by his wife in 2004, the private family-run company has more than 350 stores worldwide, 13 retail websites, and nearly 5,000 employees.

(c) Baldwin Technology Company Inc.
05.05.2023

Baldwin presents range of technologies at Graphics Canada

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 
Rounding out its technology, Baldwin’s cleaning solutions automatically and safely clean cylinders, blankets and plates used in various production processes, and tackle cleaning tasks like hickey-picking, end-of-run plate cleaning, blanket cleaning and film cylinder cleaning.
 
Common to all the technologies is that they increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products. With easy automation and compatible software, Baldwin’s technologies are seamlessly integrated with one another.

Source:

Baldwin Technology Company Inc.

(c) SHIMA SEIKI MFG., LTD.
Yarnbank
05.04.2023

SHIMA SEIKI at SPINEXPO 40th Session Shanghai

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

At SPINEXPO, SHIMA SEIKI will offer visitors a choice between its "SDS®-ONE APEX4" apparel design system and its "APEXFiz®" subscription-based design software. Whereas SDS®-ONE APEX4 is offered as an all-in-one proprietary hardware + software package, APEXFiz® is subscription-based design software that can be installed on customers' individual computers. Both SDS®-ONE APEX4 and APEXFiz® software support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. When a design is approved for production, knitting data is automatically generated for converting to machine data, allowing smooth communication for digitally bridging the gap between studio and factory. APEXFiz® thereby helps to realize sustainability while digitally transforming the fashion supply chain.

Also on display at SPINEXPO will be SHIMA SEIKI's "yarnbank®," an online web service for searching and viewing the latest yarns, developed with cooperation from yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz®, avoiding the need to scan yarn on their own. By using yarn that is used in actual production, designers and apparel companies can furthermore rest assured that the simulations created using yarn from yarnbank® are not merely realistic images but accurate representations using yarn that can actually be purchased and used in production. With yarnbank®, the entire supply chain from yarn companies and apparel companies to knit manufacturers can be connected digitally.

SHIMA SEIKI will also display the latest collection of its knit samples, including WHOLEGARMENT® knitwear that is knit in its entirety on the machine without the need for linking or sewing afterward. Together with virtual sampling performed on APEXFiz®, WHOLEGARMENT® offers smart production for realizing a sustainable fashion supply chain.

Source:

SHIMA SEIKI MFG., LTD.

20.01.2023

Asia meets EMEA: Assyst and Style3D join forces

  • Style3D is sole shareholder of Assyst
  • Integration of both product lines from 3D design to production
  • Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.
 
Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

  • Style3D is sole shareholder of Assyst
  • Integration of both product lines from 3D design to production
  • Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.
 
Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

Both companies are deeply rooted in apparel development and production: Style3D in Asia and Assyst in EMEA. Together, they are planning to create a global product offering for producers and brands that covers the entire apparel value chain from development to production and the various sales touchpoints.

Starting point will be the integration of the flagship products of both companies – Style3D and Assyst.CAD. Style3D is currently the most advanced 3D fashion design software with a high growth rate globally. While Assyst is market leader with its 2D CAD technology in Germany, Austria, Italy and Switzerland and offers a seamless software portfolio from 2D and 3D CAD to production (Automarker) and to all sales touchpoints.

Major driver of the merger is the companies’ complimentary technology offering and the vision to create a seamless digital process from providing digital fabric and accessories up to the realization of products.

The merger also strengthens Assyst's competitive position in the 3D design sector. Style3D, in turn, will benefit from Assyst's expertise in the development, CAD and digital simulation of apparel products and the access to the international market.

Looking ahead to the future, both parties will offer 2D-based & 3D-based one-stop solutions for business clients leveraging on their global tech base and complementary serviceable resource dominance. On January 24-26, the Assyst-Style3D team will meet clients and present its products at the Assyst Experience at Munich Fabric Start.

Source:

Assyst GmbH

18.01.2023

SHIMA SEIKI presents WHOLEGARMENT® knitting at Pitti Filati

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

As pioneer of seam-free WHOLEGARMENT® knitting, SHIMA SEIKI has been setting the standard almost exclusively with nearly 30 years of experience in complete garment technology. Now that benchmark has been raised once again with its new SWG-XR® flagship WHOLEGARMENT® knitting machine. SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle®. SWG-XR® features a renewed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series. SWG-XR® sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

A new proposal in WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in ultrafine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 92, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Source:

SHIMA SEIKI MFG., LTD.

Photo Pixabay
13.01.2023

Zünd: New subsidiary in Spain

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

Zund Ibérica currently employs 15 people. With more than 1,000 cutters installed, Zund Ibérica is one of the most experienced distributors of both digital cutting systems and software and workflow solutions on the Iberian market. It has its own showroom, which allows customers and interested parties to experience the many possibilities of Zünd’s digital cutting technology in person. Its staff consists of proven experts in consulting, training, installation, and service.

Source:

Zünd Systemtechnik AG

09.01.2023

Shelton Vision AI: Tailored machine learning solutions for the textiles industry

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

“Added to this is the need to ‘filter out’ the random occurrence of ‘non defects’, such as loose threads, lint and dust on the surface – the number of which can be higher than actual defects – and it is clear that a bespoke system is required.”
The development team has consequently established metadata for identifying defect properties, enabling the successful identification of faults from a much smaller number of images.

“The system employs a unique combination of machine learning for automated style training and novel algorithms for defect detection, to provide high quality images for the AI real time defect classification and grading software,” Shelton explains. “Due to the inherent variation in fabric features – raw materials, construction, texture, colour and finishes, as well as the differing product quality standards in value chains and the regional variations in what defects are called – our AI engine uses models built for each individual company or group of companies, or product value chain.”

The AI models are constructed so that the user operatives can populate them with their own data produced by the vision system or by obtaining defect images from another imaging source (eg a mobile phone camera).  

The occurrence of defects is sporadic and many defect types occur infrequently, although when they do, they can have severe consequences. These scenarios re-enforce the need for the AI engine to be quickly set up and able to operate accurately with limited data sets of typically between 30 and 50 good quality images per defect type.

A further feature is a tool enabling the user to periodically ‘clean up’ the AI data during the set up phase. This is used to resolve conflicting data and to correct mis-named images.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

“There is a need for the real time detection of defects that are being created in separate processes, such as printing or coating and for real time automated systems that can accurately determine the defects and their severity and provide a reliable signal for an operative to rectify the issue, This can result in considerable savings.

Prior to Shelton introducing powerful customised machine vision and real time defect classification, the only systems available were those that required manual sifting through vast numbers of images, which included both real defects and ‘non defect’ images. The task was very often overwhelming and did not provide much benefit beyond manual fabric inspection.

More information:
Shelton Vision fabric inspection
Source:

AWOL for British Textile Machinery Association (BTMA)

(c) EFI GmbH
30.12.2022

EFI Reggiani with textile printing solutions at India ITME 2022

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

  •  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
  • Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
  • One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
  • Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.
Source:

EFI GmbH

08.12.2022

Lectra to acquire 51% of TextileGenesis

  • Lectra extends its software offer to material traceability

Lectra announces the signature of an agreement to acquire 51% of the capital and voting rights of the Dutch company TextileGenesis. As a major player in the fashion, automotive, and furniture markets, Lectra contributes with boldness and passion to the Industry 4.0 revolution by providing software, equipment, data, and services to brands, manufacturers, and retailers.

Founded in 2018, TextileGenesis provides a Software as a Service (SaaS) platform that enables fashion brands and sustainable textile manufacturers to ensure a reliable, secure and fully digital mapping of their textiles, from the fiber to the consumer, and thereby guarantee their authenticity and origins. This solution ensures the traceability of TextileGenesis’ customers' entire sustainable textile supply chain in order to meet the demands for transparency, driven by changes in legislation in a growing number of countries and by growing consumer awareness, thereby encouraging sustainable development.  

  • Lectra extends its software offer to material traceability

Lectra announces the signature of an agreement to acquire 51% of the capital and voting rights of the Dutch company TextileGenesis. As a major player in the fashion, automotive, and furniture markets, Lectra contributes with boldness and passion to the Industry 4.0 revolution by providing software, equipment, data, and services to brands, manufacturers, and retailers.

Founded in 2018, TextileGenesis provides a Software as a Service (SaaS) platform that enables fashion brands and sustainable textile manufacturers to ensure a reliable, secure and fully digital mapping of their textiles, from the fiber to the consumer, and thereby guarantee their authenticity and origins. This solution ensures the traceability of TextileGenesis’ customers' entire sustainable textile supply chain in order to meet the demands for transparency, driven by changes in legislation in a growing number of countries and by growing consumer awareness, thereby encouraging sustainable development.  

Its innovative traceability mechanism, which addresses both ends of the textile value chain, as well as its network of partners for material certification, and its technology platform guarantee the exchange and tracking of reliable and secure data throughout a material's life cycle.

Several of the world's most prestigious fashion brands as well as leading sustainable fiber producers are already convinced of the value of TextileGenesis' innovative offer, which enables the connection of multiple actors of the sustainable fashion ecosystem on this platform.

At the beginning of January, Lectra will acquire 51% of TextileGenesis for 15.2 million euros. The acquisition of the remaining share capital and voting rights is expected to take place in two stages, in 2026 and 2028, for an amount that will be calculated based on a multiple of the 2025 and 2027 recurring revenues.

21.11.2022

Hohenstein invests 1.3 million Euro in Sizekick

Aim: Reducing returns and thus increasing sustainability in fashion e-commerce

Hohenstein, a global market leader in apparel sizing and fit development, has invested in AI technology startup, Sizekick. The collaboration will enable accurate decisions on apparel size, improving online shopping experiences, reducing returns and preventing the associated CO2 emissions.

Hohenstein’s 1.3 million Euro investment in the 2022 startup will drive growth in the Sizekick team and enable the 2023 launch of its smartphone app for online shoppers.  The technology will enable online shoppers to find the right clothing size in a few seconds via smartphone.

Aim: Reducing returns and thus increasing sustainability in fashion e-commerce

Hohenstein, a global market leader in apparel sizing and fit development, has invested in AI technology startup, Sizekick. The collaboration will enable accurate decisions on apparel size, improving online shopping experiences, reducing returns and preventing the associated CO2 emissions.

Hohenstein’s 1.3 million Euro investment in the 2022 startup will drive growth in the Sizekick team and enable the 2023 launch of its smartphone app for online shoppers.  The technology will enable online shoppers to find the right clothing size in a few seconds via smartphone.

Sizekick puts an end to unnecessary size-related returns in fashion online retail. The Munich-based company uses artificial intelligence and computer vision technology to recommend the right clothing size to customers in partner web stores. With the help of the integrated Sizekick software and a smartphone, anyone can find the right size in a few seconds. Fashion and sports brands, but also multi-brand stores or marketplaces can integrate the "Sizekick Button" in their online store. Sizekick offers its solution as Software-as-a-Service (SaaS).

"The strategic partnership with Hohenstein enables us, as a new AI solution, to meet the high demands of the market right at the start and to take on the role of technology leader. Our artificial intelligence is already learning thanks to the comprehensive Hohenstein database of 3D body scans. This is an extremely big advantage for our AI," highlights Jake Lydon, CTO at Sizekick.

Source:

Hohenstein

Photo: Monforts
The new seven chamber Montex TwinAir stenter range with Montex®Coat coating at the plant.
26.10.2022

Dolinschek: Compression stockings in a variety of colours

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The Dolinschek brothers moved their business to the historic site of the former Ambrosius Heim textile company in Burladingen in 2001 in order to expand. At the time, the company – founded by their father in 1980 as a textile wholesaler before moving into dyeing – employed just 13 people. Within a year, the company had bought additional space at the site.

Now, with Theo in charge of technology and sales, and Erwin responsible for production, the company employs almost 100 people and operates on an integrated site of 35,000 square metres.

In 2005, a laminating department was established by the company and since 2012 investment in knitting machines has been ongoing.

“The further we went into vertical integration, the more of our own products we were able to position on the market and so we were also able to make ourselves more independent,” says Theo. “We have continued to develop and today we can produce high-quality fabrics for many fields, with 42 knitting machines, 36 dyeing machines, three stenter frames and many other production and processing machines.”

Dolinschek has also developed its own proprietary TMG dyeing machines which have subsequently been successfully sold to many other companies all over the world. There are currently 11 of these machines  in operation at the Burladingen site and around 45 installed at other companies.

For finishing technology, however, the company relies on Monforts, and has installed a new seven chamber Montex TwinAir stenter range with a Montex®Coat coating unit in knife execution, enabling the coating of dimensionally stable knitted fabrics with polyurethane or acrylate. Another unique feature is the Teflon-coated (non-stick) transportation belt through the system.

The Montex line is also equipped with integrated heat recovery and exhaust gas purification to ensure the most resource-efficient processing available on the market. The exhaust air goes from the Monforts heat recovery system into an existing air/water heat recovery system and then into an electrostatic precipitator.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily.

 

More information:
Dolinschek Monforts
Source:

AWOL Media

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

21.10.2022

Modekonzern PVH Europe setzt auf Softwareplattform von Contentstack

Contentstack, ein Anbieter von Content Experience Platforms (CXP), gibt bekannt, dass die gleichnamige CMS-Softwareplattform ab sofort die Basis für den Online-Auftritt der Modemarken des globalen Bekleidungskonzerns PVH Europe ist. Contentstack wurde im Rahmen einer digitalen Transformationsinitiative ausgewählt und wird ab sofort Benutzern der Oberfläche moderne Omnichannel-Erlebnisse über eine MACH-basierte Lösung bieten. PVH Europe beherbergt unter anderem den globalen Hauptsitz von Tommy Hilfiger und die europäischen Niederlassungen von Calvin Klein.

Die Plattform ermöglicht E-Commerce-Content-Spezialisten, Standortförderungs-, SEO/SEM-Experten und technischen Stakeholdern bei PVH Europe, die Zeit bis zur Markteinführung neuer digitale Inhalte entscheidend zu verkürzen. Dies resultiert in gesteigerten Umsätzen, während gleichzeitig konsistente Omnichannel-Interaktionen gewährleistet werden.

Contentstack, ein Anbieter von Content Experience Platforms (CXP), gibt bekannt, dass die gleichnamige CMS-Softwareplattform ab sofort die Basis für den Online-Auftritt der Modemarken des globalen Bekleidungskonzerns PVH Europe ist. Contentstack wurde im Rahmen einer digitalen Transformationsinitiative ausgewählt und wird ab sofort Benutzern der Oberfläche moderne Omnichannel-Erlebnisse über eine MACH-basierte Lösung bieten. PVH Europe beherbergt unter anderem den globalen Hauptsitz von Tommy Hilfiger und die europäischen Niederlassungen von Calvin Klein.

Die Plattform ermöglicht E-Commerce-Content-Spezialisten, Standortförderungs-, SEO/SEM-Experten und technischen Stakeholdern bei PVH Europe, die Zeit bis zur Markteinführung neuer digitale Inhalte entscheidend zu verkürzen. Dies resultiert in gesteigerten Umsätzen, während gleichzeitig konsistente Omnichannel-Interaktionen gewährleistet werden.

Nach einer gründlichen Marktanalyse im Rahmen von Content-Management-Systemen fiel die Wahl des Modekonzerns auf Contentstack. Hintergrund waren die Plattform-bedingten schnellen und zuverlässigen Arbeitsabläufe, die verkürzte Time-to-Market und flexible Bearbeitungsmöglichkeiten für digitale Inhalte. Die intuitive Benutzeroberfläche, die Möglichkeit, neue Länder mit reibungsloser Sprachlokalisierung hinzuzufügen, und das branchenführende Supportprogramm Care Without Compromise™ von Contentstack waren ebenfalls wichtige Faktoren.

Source:

Contentstack / PROFIL MARKETING OHG

(c) Tonello
17.10.2022

Tonello presents Laundry (R)Evolution at Kingpins

Tonello will be unveiling the release of their new, more efficient and more responsible Laundry (R)Evolution, including three tools, at Kingpins Show in Amsterdam, from October 19-20.

Configurator
The new Configurator allows clients to choose the technologies, software, and accessories for their next laundry, combining diverse solutions and thus obtaining a real projection of energy and resource consumption, as well as savings and sustainability benefits.

B.O.P. (Be On Point)
The seamless integration with THE Laser, B.O.P. is based on the most recent developments in Computer Vision It makes positioning laser designs on garments automatic and rapid It allows a choice of different production modes and detects up to 8 garments at the same time.

Metro
Metro is a software that automatically and transparently measures the actual consumption of a laundry, summarizing these figures in each garment’s “environmental passport”.

Tonello will be unveiling the release of their new, more efficient and more responsible Laundry (R)Evolution, including three tools, at Kingpins Show in Amsterdam, from October 19-20.

Configurator
The new Configurator allows clients to choose the technologies, software, and accessories for their next laundry, combining diverse solutions and thus obtaining a real projection of energy and resource consumption, as well as savings and sustainability benefits.

B.O.P. (Be On Point)
The seamless integration with THE Laser, B.O.P. is based on the most recent developments in Computer Vision It makes positioning laser designs on garments automatic and rapid It allows a choice of different production modes and detects up to 8 garments at the same time.

Metro
Metro is a software that automatically and transparently measures the actual consumption of a laundry, summarizing these figures in each garment’s “environmental passport”.

At the show, Tonello will also demonstrate their technologies by washing the MSP Collection, in collaboration with PVH Europe, Kingpins, and designed by Piero Turk.

Source:

Tonello

(c) BTMA
The James Heal AirPro air permeability tester
11.10.2022

BTMA: Testing equipment manufacturer James Heal celebrates 150th anniversary

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.