From the Sector

Reset
108 results
05.06.2023

Resource-efficient dyeing solutions for sustainable PA fibers

CHT and Fulgar have collaborated to support the goal of reducing the carbon footprint with an effective and sustainable solution for the textile market.

Combining FULGAR’s circular economy ready yarns with CHT’s resource-saving dyeing techniques significantly reduces the usage of natural resources and leads to lower environmental impact and ultimately a lower carbon footprint. The combined process needs less water, uses less energy, and saves time while meeting the color fastness standards for finished textile products.

The combination of 100 % biobased polyamide EVO® by FULGAR yarns with CHT sustainable dyeing application can save water up to 64 %, energy use up to 50 % and process time up to 50 %, when compared to standard dyeing processes. Sustainable dyeing of EVO® is promoted using CHT’s soy-based dyeing auxiliary SARABID TS 300. SARABID TS 300 has accredited a C2C Certified Material Health Certificate at Gold level and USDA Certified Biobased Product Certification.

CHT and Fulgar have collaborated to support the goal of reducing the carbon footprint with an effective and sustainable solution for the textile market.

Combining FULGAR’s circular economy ready yarns with CHT’s resource-saving dyeing techniques significantly reduces the usage of natural resources and leads to lower environmental impact and ultimately a lower carbon footprint. The combined process needs less water, uses less energy, and saves time while meeting the color fastness standards for finished textile products.

The combination of 100 % biobased polyamide EVO® by FULGAR yarns with CHT sustainable dyeing application can save water up to 64 %, energy use up to 50 % and process time up to 50 %, when compared to standard dyeing processes. Sustainable dyeing of EVO® is promoted using CHT’s soy-based dyeing auxiliary SARABID TS 300. SARABID TS 300 has accredited a C2C Certified Material Health Certificate at Gold level and USDA Certified Biobased Product Certification.

EVO® by FULGAR, the totally renewable yarn based on castor plants, does not require high amounts of water - 4 times less compared to cotton. In addition to the sustainable aspect, EVO® by FULGAR offers characteristics like lower fiber weight, particular moisture management and higher stretch often without the need for elastomer fiber. This helps to avoid material mixes for better recycling opportunities. EVO® provides greater user comfort, mainly for performance and casual apparel.

More information:
CHT Evo by Fulgar Fulgar
Source:

CHT Germany GmbH

Graphic IVL
01.06.2023

Indorama Ventures and Carbios: MOU for PET biorecycling plant in France

Indorama Ventures Public Company Limited (IVL) and Carbios, a biotech company developing and industrializing biological solutions to reinvent the life cycle of plastic and textiles, announce the signing of a non-binding Memorandum of Understanding (MOU) to form a Joint Venture for the construction of the world’s first PET biorecycling plant in France.  

Based on and subject to the comprehensive terms set out in the MOU, Indorama Ventures plans to mobilize about €110 million for the Joint Venture in equity and non-convertible loan financing , pending final engineering documentation and final economic feasibility studies. Both parties have acknowledged their mutual support for the implementation of the project and their intent to finalize contract documentation before end 2023.

Subject to the successful performance of this first plant in France, Indorama Ventures confirms its intention to potentially expand the technology to other PET sites for future developments.

Indorama Ventures Public Company Limited (IVL) and Carbios, a biotech company developing and industrializing biological solutions to reinvent the life cycle of plastic and textiles, announce the signing of a non-binding Memorandum of Understanding (MOU) to form a Joint Venture for the construction of the world’s first PET biorecycling plant in France.  

Based on and subject to the comprehensive terms set out in the MOU, Indorama Ventures plans to mobilize about €110 million for the Joint Venture in equity and non-convertible loan financing , pending final engineering documentation and final economic feasibility studies. Both parties have acknowledged their mutual support for the implementation of the project and their intent to finalize contract documentation before end 2023.

Subject to the successful performance of this first plant in France, Indorama Ventures confirms its intention to potentially expand the technology to other PET sites for future developments.

Under the agreement signed June 1, Carbios, which filed for plant permitting in December 2022, should acquire 13ha land from Indorama Ventures’ existing PET plant at Longlaville and expects to be granted permits by Q3 2023, allowing start of construction by end of 2023 and targeted commissioning in 2025.  The land surface offers the possibility to double capacity. Pursuant to this MOU, Indorama Ventures shall ensure 100% of output repolymerization and both partners shall collaborate to secure feedstock supply.

The total capital investment for the new plant is re-estimated to be around €230 million, taking into account recent impact from inflation. Project costs shall be financed by the sums mobilized by Indorama Ventures, the French State and Grand-Est Region subsidies available for the project , and by equity capitalization of the Joint Venture by Carbios. Part of Carbios’ equity injection into the Joint Venture shall be financed by a portion of Carbios’ current cash position (i.e. €86 million as of 30 April 2023). Carbios is actively examining the best options to finance its remaining equity injection into the Joint Venture and will choose the most appropriate solution and timeline based on market conditions.

The project is part of Indorama Ventures’ Vision 2030 ambition to build on its leadership as a global sustainable chemical company. The company’s ESG commitments include spending $1.5 billion to increase its recycling capacity to 50 billion PET bottles per year by 2025 and 100 billion bottles per year by 2030. To meet these goals, Indorama Ventures, the world’s largest producer of recycled PET resin used in beverage bottles, is investing in new recycling technologies, including advanced recycling, in addition to expanding its global footprint of mechanical recycling sites, including two in France.

Carbios has developed a disruptive enzymatic depolymerization technology that enables efficient and solvent-free recycling of PET plastic and textile waste into virgin-like products with an aim to achieve true circularity. Carbios has ambitious plans to become a leading technology provider in advanced recycling of PET by 2035. After successful ongoing operations in its demonstration plant in Clermont-Ferrand in France, Carbios has been collaborating with Indorama Ventures for over a year to assess the commercial and technical feasibility of the technology. The world’s first industrial-scale enzymatic PET recycling plant at Longlaville will have a capacity to process about 50,000 tons of post-consumer PET waste per year, including waste that is not recyclable mechanically, equivalent to 2 billion PET colored bottles or 2.5 billion PET trays.

More information:
IVL Carbios biorecycling PET
Source:

IVL

16.05.2023

Virgin PET verdrängt PET-Recyclate

Neuware ist, seitdem sich die Logistikketten nach Corona in der 2. Jahreshälfte 2022 wieder neu sortiert haben, sehr billig in Europa und verdrängt PET-Recyclate, so der bvse-Fachverband Kunststoffrecycling.

Neuware ist, seitdem sich die Logistikketten nach Corona in der 2. Jahreshälfte 2022 wieder neu sortiert haben, sehr billig in Europa und verdrängt PET-Recyclate, so der bvse-Fachverband Kunststoffrecycling.

"Die hohe Inflation führt außerdem zu Konsumverzicht bei den Verbrauchern und dadurch leidet die Nachfrage bei den Verpackungsherstellern. Im Ergebnis geraten die Recyclingunternehmen derzeit massiv unter Druck“, beschreibt Dr. Dirk Textor, Vorsitzender des bvse-Fachverband Kunststoffrecycling, die aktuelle Situation.
 
Jüngstes Beispiel für die angespannte Lage ist die Schließung des PET-Recycling-Standorts von Veolia in Rostock. Der Absatz von Flakes und Regranulaten stockt – der dauerhafte, wirtschaftliche Betrieb seiner PET-Recyclinganlage ist für Veolia nicht mehr möglich. Eine Absicherung des Absatzes von recyceltem PET ist in Zusammenarbeit mit der Getränkeindustrie und/oder dem Handel nicht gelungen, hieß es zur Begründung.
 
„Wir sehen das gesamte PET-Recycling in einer Schieflage, weil Abfüller und Inverkehrbringer von PET-Verpackungen ihrer Produktverantwortung nicht nachkommen. Eine mittelfristige Besserung der Situation ist nicht in Sicht. Die PET-Verarbeiter setzen auf Neuware und listen die Recyclate aus“, kritisiert Textor.
 
Dieses Verhalten der PET-Verarbeiter ist nach Auffassung des bvse-Fachverband Kunststoffrecycling „sehr überraschend“, weil Recycling-PET der einzige Kunststoff ist, der bei Verpackungen mit direktem Lebensmittelkontakt eingesetzt werden kann. Das jetzt zu beobachtende Marktverhalten der PET-Verarbeiter, die ausschließlich auf Neuware setzen, sei kurzsichtig und hoch problematisch, heißt es beim bvse. Man dürfe nicht annehmen, dass eine stillgelegte Anlage innerhalb kurzer Zeit wieder hochgefahren werden kann. Anlagen müssen kontinuierlich betrieben werden, um die benötigten Mengen in geeigneten Qualitäten darstellen zu können. Im schlimmsten Fall verschwindet die Anlage sogar ganz vom Markt.
 
„Und damit wird es eng werden, sehr eng, wenn in Kürze die hohen Anforderungen der europäischen Kunststoffstrategie umzusetzen sind. Nicht zuletzt werden bei der Novellierung der europäischen Verpackungsverordnung sehr ambitionierte Recyclateinsatzquoten definiert. Auch deshalb wird es in Europa zu einem Verteilungskampf um Recycling-PET kommen“, so bvse-Fachverbandsvorsitzender Dirk Textor.

Source:

bvse-Fachverband Kunststoffrecycling

Recycled yarn (c) ITA Aachen
05.05.2023

ITA at the ITMA: Smart Circular Economy

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

ITA Aachen - Digital ring spinning tester for recycled fibres enables spinning of fine yarns with high recycled fibres content
The Institut für Textiltechnik of RWTH Aachen University (ITA) will be exhibiting a digital ring spinning tester, which spins recycled fibres directly and conventionally with a particularly high content of 60-70 percent. Up to now, recycled yarns have mainly been rotor-spun in this blend ratio. This results in rather coarse yarns and is not suitable for finer textiles such as outerwear. Ring spinning of recycled yarns now enables the spinning of finer yarns and thus a higher application level for recycled materials.

A unique selling point of the ITA ring spinning tester is the simultaneous spinning in the direct spinning process from the sliver and in the classic ring spinning process. For this purpose, the strength and elongation of the spun yarn are determined online and digitally for the first time. The real-time measurement allows process parameters and yarn properties to be adjusted iteratively and quickly. The ring spinning tester was upgraded from an existing tester to Industry 4.0 standard and is operated via a tablet. Operation via tablet enables the adjustment of process parameters including online quality monitoring remotely from anywhere in the world.
 
For this purpose, the ring spinning tester is also able to produce fine ring spun yarns. These yarns made from recycled material opens up a multitude of further fields of application for woven and knitted goods. Now, for example, clothing and technical textiles can be made from recycled material, the production of which was not possible before - such as outerwear made from recycled material. The development of new industries and fields of application opens up new market potential for recycled yarns - also and especially for processing in Europe. This creates the opportunity to preserve key technologies and jobs in cost-intensive locations.

ITA Augsburg - Recycling Atelier: Walk4Recycling
The Recycling Atelier of the Institut für Textiltechnik Augsburg gGmbH on stand H3-A207 presents the textile recycling from used textiles into new products via the various process steps and, together with the industrial partners, opens up solution paths for industrial implementation.

Under the headline "Walk4Recycling", a tour of the fair shows the cycle of used textiles from used knitwear into a new knitted pullover via a ring yarn made from a blend of 65 percent recycled cotton and 35 percent virgin polyester. The key innovation here is the high proportion of recycled fibres from post-consumer textiles for a ring yarn of this fineness. Today, mainly coarse rotor yarns for low-quality textiles are spun from these materials. The industrial partners participating in the Walk4Recycling are partners of the Recycling Atelier and contribute with their technologies to the fact that fibre material from old clothes can be processed in various process stages into a yarn of new value and high-quality ready-made garments.

The Walk4Recycling offers visitors the opportunity to experience a complete recycling cycle with the numerous process stages from tearing the old textiles, preparing and spinning the fibres and knitting a new jumper live during the fair. Get detailed information on the mechanical recycling of clothing via QR code, website and flyer about the participating exhibitors and their machines and technologies. A short movie will give you additional insights into the various processes involved in the production of the jumper.

(c) PrimaLoft
19.04.2023

PrimaLoft® Insulation with Ocean Bound Plastic aus gesammeltem Plastik

PrimaLoft, Inc., ein Unternehmen für Materialtechnologie, macht mit der Einführung von PrimaLoft® Insulation with Ocean Bound Plastic einen weiteren wichtigen Schritt in seiner Relentlessly Responsible™ Mission. Die Innovation verwendet Plastik, das in Küstennähe gesammelt wird, um Hochleistungsisolationsfasern herzustellen. So wird verhindert, dass weiterer Plastikmüll ins Meer gelangt. Helly Hansen und Isbjörn of Sweden sind die ersten Marken, welche die neue Isolation in ihren Herbst/Winter 2023 Kollektionen verwenden.

PrimaLoft® Insulation with Ocean Bound Plastic ist eine leistungsstarke Isolation, die zu 100 Prozent aus recyceltem Material besteht, wovon 60 Prozent aus Plastikflaschen stammen, die in einem Umkreis von 50 Kilometern um Küstengebiete gesammelt wurden. Da das Plastik noch vor dem Erreichen des Meers abgefangen wird, kann es zur Verarbeitung der hochwertigen PrimaLoft-Isolation genutzt werden. Gleichzeitig wird verhindert, dass die Weltmeere weiter verschmutzt werden.

PrimaLoft, Inc., ein Unternehmen für Materialtechnologie, macht mit der Einführung von PrimaLoft® Insulation with Ocean Bound Plastic einen weiteren wichtigen Schritt in seiner Relentlessly Responsible™ Mission. Die Innovation verwendet Plastik, das in Küstennähe gesammelt wird, um Hochleistungsisolationsfasern herzustellen. So wird verhindert, dass weiterer Plastikmüll ins Meer gelangt. Helly Hansen und Isbjörn of Sweden sind die ersten Marken, welche die neue Isolation in ihren Herbst/Winter 2023 Kollektionen verwenden.

PrimaLoft® Insulation with Ocean Bound Plastic ist eine leistungsstarke Isolation, die zu 100 Prozent aus recyceltem Material besteht, wovon 60 Prozent aus Plastikflaschen stammen, die in einem Umkreis von 50 Kilometern um Küstengebiete gesammelt wurden. Da das Plastik noch vor dem Erreichen des Meers abgefangen wird, kann es zur Verarbeitung der hochwertigen PrimaLoft-Isolation genutzt werden. Gleichzeitig wird verhindert, dass die Weltmeere weiter verschmutzt werden.

Das Verfahren ist von OceanCycle zertifiziert, einem sozialen Unternehmen, das sich darauf fokussiert, die Verschmutzung der Ozeane durch Plastik zu verhindern und die Lebensbedingungen in Küstengemeinden durch Zertifizierung und direkte soziale Maßnahmen zu verbessern. Die unabhängige OceanCycle-Zertifizierung stellt sicher, dass das Material auch wirklich aus Küstennähe stammt, die Beschaffung ethisch-korrekt und die Rückverfolgbarkeit lückenlose ist. Zudem gewährleistet sie eine lückenlose Dokumentation von der Sammlung bis zur Herstellung.

Umwandlung von Ocean Bound Plastik in PrimaLoft-Material
Die Relentlessly Responsible™ Mission von PrimaLoft hat zum Ziel, durch Innovation sowohl Leistung als auch Nachhaltigkeit seiner Produkte immer weiter zu steigern. „Unsere neueste Entwicklung ist eine wichtige Lösung sowohl für die Umwelt, als auch für die Recycling-Lieferkette“, sagt Tara Maurer-Mackay, Senior Vice President, Product Strategy. „Die Qualität von Kunststoffen verschlechtert sich schnell, sobald sie den Elementen im Meerwasser länger ausgesetzt sind, was sie für die meisten Recyclingmaßnahmen unbrauchbar macht. Indem wir Kunststoffabfälle auffangen, bevor sie ins Meer gelangen können, sind wir in der Lage, das Material zur Herstellung unserer hochwertigen Produkten zu verwenden, und damit unseren Markenpartnern und Verbrauchern eine perfekte Mischung aus Leistung und Vielseitigkeit bei geringerer Umweltbelastung zu bieten." PrimaLoft® Insulation with Ocean Bound Plastic besitzt alle Leistungsvorteile, für die PrimaLoft bekannt ist, darunter leichtgewichtige Wärmeleistung sowohl bei trockenen als auch bei nassen Bedingungen, praktische Packbarkeit und lange Haltbarkeit.

Foto: ANDRITZ
Novafiber CEO and Head of Production together with ANDRITZ technicians and project manager in front of the newly installed 6-cylinder EXEL line
05.04.2023

Novafiber starts up textile recycling and airlay lines from ANDRITZ

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

Based in Palín, Novafiber is a leading company in Guatemala for producing nonwovens from post-industrial textile waste for both the local market and export.

Source:

ANDRITZ AG

30.03.2023

Sanyou and Renewcell: Viscose fibers made from 100% recycled textiles

On the sidelines of the Intertextile Shanghai fair, the Swedish textile-to-textile recycling innovator Renewcell and the leading Chinese viscose manufacturer Tangshan Sanyou announced the next step in their partnership to make fashion circular that stretches back to 2018.

The two companies’ new shared ambition is to offer manufacturers and brands Circulose® viscose fibers made from 100% recycled textiles in commercial quantities starting in 2024. The collaboration has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

“I am very happy to announce this acceleration of our long-standing partnership with Tangshan Sanyou. They were the first commercial producer of Circulose®-based fibers in the world, and the first to commit to sourcing significant volumes from us. Now, they aim to also be the first to commercialize 100% Circulose® content fibers” said Patrik Lundström, CEO of Renewcell, adding "I applaud Tangshan Sanyou’s vision and support to scaling next gen raw materials like Circulose®.”

On the sidelines of the Intertextile Shanghai fair, the Swedish textile-to-textile recycling innovator Renewcell and the leading Chinese viscose manufacturer Tangshan Sanyou announced the next step in their partnership to make fashion circular that stretches back to 2018.

The two companies’ new shared ambition is to offer manufacturers and brands Circulose® viscose fibers made from 100% recycled textiles in commercial quantities starting in 2024. The collaboration has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

“I am very happy to announce this acceleration of our long-standing partnership with Tangshan Sanyou. They were the first commercial producer of Circulose®-based fibers in the world, and the first to commit to sourcing significant volumes from us. Now, they aim to also be the first to commercialize 100% Circulose® content fibers” said Patrik Lundström, CEO of Renewcell, adding "I applaud Tangshan Sanyou’s vision and support to scaling next gen raw materials like Circulose®.”

The announcement, which follows the recent start of deliveries of 100% recycled textile Circulose® pulp from Renewcell’s newly opened Renewcell 1 recycling plant, is the result of successful validation of Circulose®’s quality in production at Tangshan Sanyou’s commercial-scale manufacturing lines. Tangshan Sanyou would strive to finish the mission of producing commercial volumes of 50% Circulose® content fibers during 2023 and work towards achieving the delivery of 100% Circulose® content branded viscose fibers to selected fashion brands and manufacturers starting in 2024. The two companies will cooperate to market the fibers globally using Renewcell’s Circulose® ingredient brand name.

Mr. Zhang Dongbin, Executive Vice General Manager of Tangshan Sanyou Chemical Fiber, says, "Through the collaboration with Renewcell, we have achieved to use Circulose® made from recycled cotton in the production of our viscose fibers, which is great beneficial to improving resource utilization efficiency and lowering carbon footprint of the industry. It has brought a huge impact in the sustainable fashion industry. We will continue putting efforts in forming good interaction between consumers, brands and enterprises, convey the concept of circular sustainable fashion, promote the greening of textile industry, and ensure a more sustainable way to ensure the sustainable development of the textile industry. Protecting the global ecological environment by applying sustainable solutions is our common goal."

Source:

Renewcell

Freudenberg´s 100% rTPE Base Content Interlining Medium Weight Foto: Freudenberg
29.03.2023

Freudenberg: First 100% rTPE base content interlining series for apparel

Freudenberg Performance Materials Apparel is expanding its Super Elastic Interlinings Range with the introduction of the apparel industry’s first 100% recycled thermoplastic elastomers (rTPE) base content interlining series. In recognition of the growing use of elastic interlinings in apparel and building on the principles of Freudenberg Performance Materials´ Apparel’s House of Sustainability, these new products speak for high-quality and sustainable solutions.

The new, 100% rTPE base content interlinings are offered in 40-90 g/m2 weights, with wide applicability – from lightweight knit fabrics with applications in leggings and sports bras to elastic woven fabrics that require medium-to-heavy weights, such as denim, maternity clothes, or casual wear. Sustainable without compromising on quality, the new interlinings offer exceptional elasticity and retain excellent recovery capabilities.

Freudenberg Performance Materials Apparel is expanding its Super Elastic Interlinings Range with the introduction of the apparel industry’s first 100% recycled thermoplastic elastomers (rTPE) base content interlining series. In recognition of the growing use of elastic interlinings in apparel and building on the principles of Freudenberg Performance Materials´ Apparel’s House of Sustainability, these new products speak for high-quality and sustainable solutions.

The new, 100% rTPE base content interlinings are offered in 40-90 g/m2 weights, with wide applicability – from lightweight knit fabrics with applications in leggings and sports bras to elastic woven fabrics that require medium-to-heavy weights, such as denim, maternity clothes, or casual wear. Sustainable without compromising on quality, the new interlinings offer exceptional elasticity and retain excellent recovery capabilities.

The 100% rTPE base content interlinings reduce the need for virgin materials in apparel while also reducing the demand for the extractive practices necessary to produce such materials. Furthermore, the use of recycled components reduces materials in landfills and oceans, in consideration of full-garment lifecycle management.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

28.03.2023

LOI between Renewcell and Chinese Lyocell Fiber Producer CTA Green Fibre

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

Patrik Lundström, Renewcell’s CEO, commented: ”With this agreement, we take a new step in demonstrating the applicability of Circulose® in commercial-scale production of lyocell fibers. Lyocell is a high quality, low-impact fiber using closed loop production process which is highly sought after among our fashion brand partners that will now soon be available incorporating Circulose® recycled from textile waste. I am impressed by the innovative capacity and leadership of CTA Green Fibre and look forward to working together with them to make fashion circular together.”

Source:

Re:NewCell AB

02.03.2023

Recycling Atelier Augsburg and Kelheim Fibres cooperate

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

As a model factory, the Recycling Atelier Augsburg combines the most important processes of textile recycling and offers holistic and comprehensive research along the value chain," explains Georg Stegschuster, head of the Recycling Atelier Augsburg. The scientists research on all process steps of textile recycling: from material analysis to sorting, preparation and textile processing to sustainable product design. Comprehensive data collection and the use of artificial intelligence as well as innovative materials play a central role.

Kelheim Fibres is a producer of high-quality viscose fibres, which consist of cellulose, the main component of the renewable raw material wood, and are used worldwide for products in areas such as hygiene, textiles, and technical applications.

"In New Business Development as well as Fibre and Application Development, we follow the Open Innovation concept - the cooperation with the Recycling Atelier offers us an ideal platform for this. Here we work with partners to advance sustainability and performance," explains Maik Thiel, project manager at Kelheim Fibres.

Recycled cotton fibres are often very short or of uneven length, which makes further processing of 100 % recycled material a challenge. Adding speciality fibres from Kelheim Fibres should enable the production of high-quality new products, such as nonwovens. In the future, the fibres provided by Kelheim Fibres will also be made from recycled pulp.

Source:

Kelheim Fibres GmbH

(c) Dibella GmbH
24.02.2023

Dibella: Systematisierung von Alttextil-Sortierung

Dibella engagiert sich seit Jahren in verschiedenen Projekten für das Recycling von Objekttextilien. Beim jüngsten Projekt, das die Möglichkeiten einer Faser-Kreislaufführung auslotete, erwies sich die Identifizierung der Alttextilien als größte Barriere. Das Unternehmen will diese Hürde nun nehmen: Im Rahmen des von der Deutschen Bundesstiftung Umwelt (DBU) geförderten Projekts „KICKup“ (KI-gestützte, chemische Cellulose-Kreisläufe) soll die Sortierung von Geweben aus Baumwolle und Polyester automatisiert und damit die Grundlage für ein reibungsloses Faserrecycling geschaffen werden.

In Textilservice-Unternehmen werden große Mengen gleichartiger Bett-, Tisch- und Frottierwäsche eingesetzt, die nach Ablauf der Nutzungsphase als Alttextilien anfallen. Diese bieten aufgrund der hohen Volumina, der einheitlichen Zusammensetzung und einer begrenzten Zahl von Sammelstellen optimale Voraussetzungen für ein zukunftsfähiges Faser-zu-Faser-Recyclingsystem. In der Praxis scheitert ein solches Konzept jedoch an einer mangelnden Unterscheidbarkeit der Materialien. Zu diesem Ergebnis kam ein Pilotprojekt1, an dem Dibella beteiligt war.

Dibella engagiert sich seit Jahren in verschiedenen Projekten für das Recycling von Objekttextilien. Beim jüngsten Projekt, das die Möglichkeiten einer Faser-Kreislaufführung auslotete, erwies sich die Identifizierung der Alttextilien als größte Barriere. Das Unternehmen will diese Hürde nun nehmen: Im Rahmen des von der Deutschen Bundesstiftung Umwelt (DBU) geförderten Projekts „KICKup“ (KI-gestützte, chemische Cellulose-Kreisläufe) soll die Sortierung von Geweben aus Baumwolle und Polyester automatisiert und damit die Grundlage für ein reibungsloses Faserrecycling geschaffen werden.

In Textilservice-Unternehmen werden große Mengen gleichartiger Bett-, Tisch- und Frottierwäsche eingesetzt, die nach Ablauf der Nutzungsphase als Alttextilien anfallen. Diese bieten aufgrund der hohen Volumina, der einheitlichen Zusammensetzung und einer begrenzten Zahl von Sammelstellen optimale Voraussetzungen für ein zukunftsfähiges Faser-zu-Faser-Recyclingsystem. In der Praxis scheitert ein solches Konzept jedoch an einer mangelnden Unterscheidbarkeit der Materialien. Zu diesem Ergebnis kam ein Pilotprojekt1, an dem Dibella beteiligt war.

Effektive Sortierung von Alttextilien verbessert die Zirkularität
„Im textilen Mietservice werden Gewebe in unterschiedlichen Baumwoll-Polyester-Mischungen, aus reiner Baumwolle und sogar aus 100% Polyester verwendet. Für jedes dieser Materialien gibt es spezielle Recycling-Technologien. Die Zuordnung zum geeigneten Prozess hängt allerdings wesentlich von der Sortierung der Ware ab: Je besser die Qualitäten unterschieden werden, desto größer sind die Effekte für die Kreislaufführung. Bisher fehlt jedoch ein geeignetes, automatisiertes Sortiersystem für eine qualitative Erfassung gängiger Objekttextilien. Dazu haben wir gemeinsam mit ausgesuchten Partnern das Projekt Aufbau KI-gestützter geschlossener Kreisläufe für B2B-Textilien aus Baumwoll-Polyester-Mischungen auf der Basis chemischen Upcyclings ins Leben gerufen. Dank einer Förderung der DBU können wir dieses in den kommenden zwei Jahren entwickeln“, fasst Ralf Hellmann, Geschäftsführer von Dibella zusammen.

Hohe Transparenz mit moderner Technik
Das Projekt ist Teil einer aktuellen DBU-Förderinitiative für textile Kreisläufe, die zu ressourcenschonenden Produkt-, Material- und Stoffkreisläufen beiträgt. Das Hauptziel des von der Deutschen Bundesstiftung Umwelt fachlich und finanziell mit 397.266 Euro geförderten Vorhabens ist die Entwicklung eine Anlage, die mittels Infrarot-Technologie und künstlicher Intelligenz eine möglichst sortenreine Sortierung der aus dem Mietservice stammenden Warenströme vornehmen kann. Die Projektpartner fokussieren sich dabei im Wesentlichen auf reine Baumwolltextilien sowie auf Mischgewebe aus Polyester und Baumwolle bzw. Regeneratfasern. Sie sollen zukünftig mit hoher Genauigkeit identifiziert und dem ihnen zugeordneten chemischen oder mechanischen Recycling-Prozess zugeführt werden können.

Zukunftsweisendes Projekt
„Je sortenreiner Materialien zurückgewonnen werden, desto besser lassen sie sich wiederverwerten. Dieser für eine Circular Economy zentrale Faktor spielt auch bei Textilien eine Rolle“, sagt Dr. Volker Berding, Leiter des DBU-Referats Ressourcenmanagement. Das Vorhaben von Dibella hat nach seinen Worten daher Potenzial, den Rohstoffeinsatz zu verringern und eine höherwertige Nutzung der Alttextilien zu verbessern.

1Digitale Technologien als Enabler eine ressourceneffizienten kreislauffähigen B2B Textilwirtschaft (Ditex)

Source:

Dibella GmbH

03.02.2023

Cellulose Fibres Conference 2023 publishes program

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

  • Strategies, Policy Framework of Textiles and Market Trends,
  • Circular Economy and Recyclability of Fibres,
  • Alternative Feedstocks and Supply Chains,
  • Innovation Award “Cellulose Fibre Innovation of the Year 2023″,
  • Sustainability and Environmental Impacts,
  • Ionic Liquids and New Technologies for Pulps, Fibres and Yarns,
  • New Technologies and Applications beyond Textiles.

The full conference program is available here.

Source:

nova-Institut für politische und ökologische Innovation GmbH

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

Photo: Carbios
13.01.2023

Carbios and Novozymes deepen collaboration in biorecycling of PET

Carbios and Novozymes announced an exclusive long-term global strategic partnership. This major agreement ensures the long-term production and supply of Carbios’ proprietary PET-degrading enzymes at an industrial scale for the world’s first biological PET-recycling plant due to start production in 2025 in Longlaville (France), as well as Carbios’ future licensee customers.
 
Carbios and Novozymes have had a partnership since 2019 to develop enzyme-based solutions and address  the sustainability challenge of plastic pollution, both within PET-recycling[1] and PLA-biodegradation[2].  Building on the current Joint Development Agreement (JDA), under the new agreement, Carbios and Novozymes will extend their collaboration to develop, optimize and produce enzymes that will subsequently be supplied by Novozymes to all licensees of Carbios’ technology.  The new agreement grants both parties exclusivity in the field of the partnership.
 

Carbios and Novozymes announced an exclusive long-term global strategic partnership. This major agreement ensures the long-term production and supply of Carbios’ proprietary PET-degrading enzymes at an industrial scale for the world’s first biological PET-recycling plant due to start production in 2025 in Longlaville (France), as well as Carbios’ future licensee customers.
 
Carbios and Novozymes have had a partnership since 2019 to develop enzyme-based solutions and address  the sustainability challenge of plastic pollution, both within PET-recycling[1] and PLA-biodegradation[2].  Building on the current Joint Development Agreement (JDA), under the new agreement, Carbios and Novozymes will extend their collaboration to develop, optimize and produce enzymes that will subsequently be supplied by Novozymes to all licensees of Carbios’ technology.  The new agreement grants both parties exclusivity in the field of the partnership.
 
The strategic partnership supports the large-scale industrial deployment of Carbios’ patented PET-recycling technology starting with Carbios’ future industrial reference unit in Longlaville (France), which will be the world’s first biological PET-recycling plant. Construction will begin later this year, and both building and operating permits having been filed with local authorities.  Production at the plant is set to start in 2025 and the processing capacity will be 50,000 tonnes of waste per year.

Source:

Carbios

Grafik: econAN international GmbH
11.01.2023

Geförderte Geschäftsanbahnungsreise nach Finnland: Textilrecycling und neue textile Fasern

Die AHK Finnland führt in Kooperation mit der econAN international GmbH, dem bvse-Fachverband Textilrecycling e.V. und German RETech Partnership e.V. im Auftrag des Bundesministeriums für Wirtschaft und Klimaschutz, eine Geschäftsanbahnungsreise nach Finnland durch. Es handelt sich dabei um eine projektbezogene Fördermaßnahme. Sie ist Bestandteil der Exportinitiative Umwelttechnologien und wird im Rahmen des Markterschließungsprogramms für KMU durchgeführt. Zielgruppe sind vorwiegend kleine und mittlere deutsche Unternehmen (KMU).

Die AHK Finnland führt in Kooperation mit der econAN international GmbH, dem bvse-Fachverband Textilrecycling e.V. und German RETech Partnership e.V. im Auftrag des Bundesministeriums für Wirtschaft und Klimaschutz, eine Geschäftsanbahnungsreise nach Finnland durch. Es handelt sich dabei um eine projektbezogene Fördermaßnahme. Sie ist Bestandteil der Exportinitiative Umwelttechnologien und wird im Rahmen des Markterschließungsprogramms für KMU durchgeführt. Zielgruppe sind vorwiegend kleine und mittlere deutsche Unternehmen (KMU).

Für die Projektteilnehmer*innen werden individuell auf ihre Anforderungen zugeschnittene Geschäftsgespräche mit potenziellen Kooperationspartnern, Kunden und Branchenexperten organisiert. In Vorbereitung auf die Geschäftsanbahnungsreise erhalten sie eine Zielmarktanalyse, die auf die relevante Branche, deren Marktentwicklung, Vertriebsinformationen sowie die rechtlichen und steuerlichen Rahmenbedingungen auf dem finnischen Markt eingeht. Im Rahmen einer fachbezogenen Präsentationsveranstaltung werden die deutschen Teilnehmer*innen die Möglichkeit haben, dem finnischen Fachpublikum bestehend aus Vertreter*innen der Wirtschaft, Verbänden, Verwaltung und Presse ihre Leistungen, Produkte und Technologien vorzustellen.

Für etablierte Unternehmen und Start-ups aus den Bereichen Textilrecycling und neue Textilfasern bieten sich viele Geschäfts- und Kooperationsmöglichkeiten auf dem finnischen Markt. Ebenfalls ist der finnische Markt interessant für deutsche Unternehmen, die Textilien in ihren Produkten nutzen und diese nachhaltiger gestalten möchten. Nachgefragt sind u.a. Lösungen für eine effiziente Sortierung von Textilien und für die Identifizierung von Textilarten, Innovationen für die Verwendung von recycelten Fasern, Recyclingtechniken sowie Maschinenhersteller. Deutsche Unternehmen dürfen mit einem großen Interesse an Kooperationen rechnen, denn die finnische Textilindustrie benötigt Partner in allen Phasen der Wertschöpfungskette.

Zielgruppe: Unternehmen aus den Bereichen Textilrecycling sowie neue textile Fasern. Die gesamte Wertschöpfungskette ist angesprochen – von Zulieferern von Maschinen und Rohstoffen bis zu Anbieter von Produkten aus recyceltem Material.

Inhalt: Die TeilnehmerInnen erhalten Unterstützung bei Markteintritt bzw. -bearbeitung in Finnland:

  • Während einer Fachkonferenz präsentieren sie ihre Produkte und Dienstleistungen dem regionalen Fachpublikum (aus Wirtschaft, Politik und Verbänden).
  • Zur Vorbereitung erhalten sie eine branchenspezifische Zielmarktanalyse mit Informationen zu den Marktpotenzialen und -entwicklungen, rechtlichen Rahmenbedingungen etc.
  • Das Herzstück des Programms sind individuelle Termine mit Entscheidungsträgern und potenziellen Geschäftspartnern. Diese werden im Vorfeld für jedes Unternehmen durch eine individuelle Geschäftspartnersuche ermittelt.

Der Teilnahmebetrag liegt je nach Firmengröße zwischen 500€ und 1.000€ netto. Es können maximal 12 Unternehmen teilnehmen.

Weitere Informationen und zum Anmeldeformular online unter: https://www.econan.com/textilrecycling-und-neue-textile-fasern-in-finnland/  

Source:

econAN international GmbH

(c) Haelixa
05.01.2023

Damteks and Haelixa collaborate: Tracing recycled acrylic fiber

Haelixa, the Swiss traceability company and Damteks Textiles have announced a collaboration to mark and trace recycled acrylic fiber. Damteks is offering their recycled yarn to customers whereby they are able to place an order with the unique Haelixa DNA already attached.

The Haelixa solution is DNA markers which are solved in liquid and applied to fibers as a fine spray. Spot checks are completed after spraying to determine the presence of DNA and identify the product. The test is based on PCR technology that is 100% reliable and has forensic validity.

Damteks saw an increase in demand for blended yarn in the last year. The request is most often a composition of 30% recycled fiber with 70% standard fiber. Brands are looking for options to be more sustainable and Damteks proactively sought out an answer. They are offering the yarn with Haelixa DNA to validate the recycled acrylic in the mix.

Haelixa, the Swiss traceability company and Damteks Textiles have announced a collaboration to mark and trace recycled acrylic fiber. Damteks is offering their recycled yarn to customers whereby they are able to place an order with the unique Haelixa DNA already attached.

The Haelixa solution is DNA markers which are solved in liquid and applied to fibers as a fine spray. Spot checks are completed after spraying to determine the presence of DNA and identify the product. The test is based on PCR technology that is 100% reliable and has forensic validity.

Damteks saw an increase in demand for blended yarn in the last year. The request is most often a composition of 30% recycled fiber with 70% standard fiber. Brands are looking for options to be more sustainable and Damteks proactively sought out an answer. They are offering the yarn with Haelixa DNA to validate the recycled acrylic in the mix.

The haelixa team visited the Damteks recycling facility in Istanbul to kick off the partnership that will continue throughout 2023. The traceability program has the DNA sprayed on the recycled fibers before spinning. The project also saw the use of a tailored Haelixa liquid sprayer designed by the team based in Switzerland. When manufacturers do not have built-in moisturizing systems, Haelixa provides them with a custom unit to shower the DNA liquid onto the fibers. This sprayer is engineered to match the mechanical processing of the customer.

Damteks is a family-owned business that pride itself in carefully selecting environmentally responsible options for its production processes. On top of the certifications they have obtained including - GRS, RCS, GOTS, OCS - Damteks decided to have their products "Marked and Traced by Haelixa" to add additional credibility and reliability. Damteks plans to offer marked and traced by Haelixa yarn in different dyes as their offering to brands.

More information:
DNA marker acrylic fiber
Source:

Haelixa

(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

12.12.2022

ANDRITZ recycling line for agricultural plastic waste nets

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

This line, inspired by the techniques from textile wastes recycling, is equipped with a unique mechanical dry-cleaning system that allows resource savings by avoiding the use of water and chemicals. This state-of-the-art ANDRITZ equipment allows RecyOuest to produce recycling fibers for nonwoven applications and also pellets for ever new eco-designed nets and twines for the agricultural sector, with the lowest possible environmental impact.

Source:

ANDRITZ AG

Photo: Alexander Donka
08.12.2022

Lenzing and Renewcell sign large-scale supply agreement

The Lenzing Group, a leading supplier of sustainably produced specialty fibers, and Renewcell, the Swedish textile-to-textile recycling pioneer, have signed a multi-year supply agreement to accelerate the transition of the textile industry from a linear to a circular business model. The agreement contains the sale of 80,000 to 100,000 tonnes of Renewcell’s 100 per cent recycled textile Circulose® dissolving pulp to Lenzing over a five-year period, for use in the production of cellulosic fibers for fashion and other textile applications.

“The textile industry must change. By signing the agreement with Swedish textile-to-textile recycling company Renewcell, Lenzing is able to further integrate recycling and accelerate the transition of the textile industry from linear to circular. As champions of sustainability, we know that moving towards a circular economy is vital to address the enormous textile waste challenges of the industry”, says Christian Skilich, Chief Pulp Officer of the Lenzing Group.

The Lenzing Group, a leading supplier of sustainably produced specialty fibers, and Renewcell, the Swedish textile-to-textile recycling pioneer, have signed a multi-year supply agreement to accelerate the transition of the textile industry from a linear to a circular business model. The agreement contains the sale of 80,000 to 100,000 tonnes of Renewcell’s 100 per cent recycled textile Circulose® dissolving pulp to Lenzing over a five-year period, for use in the production of cellulosic fibers for fashion and other textile applications.

“The textile industry must change. By signing the agreement with Swedish textile-to-textile recycling company Renewcell, Lenzing is able to further integrate recycling and accelerate the transition of the textile industry from linear to circular. As champions of sustainability, we know that moving towards a circular economy is vital to address the enormous textile waste challenges of the industry”, says Christian Skilich, Chief Pulp Officer of the Lenzing Group.

“Lenzing is a major player in our industry, with an inspiring track record of path-breaking technical excellence and sustainability leadership. Our new partnership fits perfectly into Renewcell’s strategy to accelerate the scale-up of circular materials by collaborating with fashion’s most important players. We are more than pleased to join forces with Lenzing with the shared goal of making fashion circular.” said Patrik Lundström, CEO of Renewcell, in a comment on the agreement.

Canopy, a not-for-profit environmental organization dedicated to protecting forests, species, and climate, welcomes the agreement between Lenzing and Renewcell.
“Accelerating the transition to low-impact, circular production is the challenge of the decade for the fashion industry. That is why this partnership between Renewcell and Lenzing is so refreshing – it will bring low-carbon Next Gen solutions to market at scale,” exclaimed Nicole Rycroft, Executive Director of Canopy. “With the climate and biodiversity clocks ticking, the race to circularity is one we need all companies to win.”
 
It is an essential part of Lenzing’s corporate strategy and ambitious sustainability targets to become a true champion of circularity and to offer TENCEL™ and LENZING™ ECOVERO™ branded specialty textile fibers with up to 50 percent post-consumer recycled content on a commercial scale by 2025. To reach this goal Lenzing partners with recycling pioneers like Renewcell.
Circulose® originates 100 per cent from textile waste, like old jeans and production scraps, and turns into dissolving pulp. It transforms textile waste and production scrap into new high-quality textile products.

Source:

Lenzing AG / Renewxell

15.11.2022

Renewcell and Eastman collaborate to develop textile-to-textile recycled yarns

The Swedish textile-to-textile recycling company Renewcell has signed a Letter of Intent with Eastman, a leading US cellulosic acetate fiber producer, for a collaboration to develop Naia™ Renew ES yarns sourced from Circulose®, Renewcell’s 100% recycled textile raw material. The agreement is Renewcell’s first with a US-based fiber producer and an important step in developing the first acetate-based applications to use Circulose® feedstock.

”Eastman considering Circulose® as a feedstock in the production of a premium yarn like Naia™ Renew reflects very well on the Renewcell team’s ability to work with partners to adjust and optimize our product for new fiber applications. This agreement signals an acceleration of our joint efforts to bring Naia™ Renew ES yarns derived from Circulose® to market. I look forward to working alongside Eastman in making fashion circular.” comments Patrik Lundström, CEO of Renewcell.

The Swedish textile-to-textile recycling company Renewcell has signed a Letter of Intent with Eastman, a leading US cellulosic acetate fiber producer, for a collaboration to develop Naia™ Renew ES yarns sourced from Circulose®, Renewcell’s 100% recycled textile raw material. The agreement is Renewcell’s first with a US-based fiber producer and an important step in developing the first acetate-based applications to use Circulose® feedstock.

”Eastman considering Circulose® as a feedstock in the production of a premium yarn like Naia™ Renew reflects very well on the Renewcell team’s ability to work with partners to adjust and optimize our product for new fiber applications. This agreement signals an acceleration of our joint efforts to bring Naia™ Renew ES yarns derived from Circulose® to market. I look forward to working alongside Eastman in making fashion circular.” comments Patrik Lundström, CEO of Renewcell.

Ruth Farell, GM of Eastman Textiles says: ”we are thrilled to collaborate with a pioneeer such as Renewcell to lower our reliance on virgin feedstocks, redefine the essence of textile waste and close the loop within the textiles industry. This collaboration is at the heart of our strategy to launch a portfolio of products with increased recycled content”