From the Sector

Reset
1232 results
(c) Ilona Stelzl
19.06.2023

Supreme Kids geht in die nächste Runde

Die Supreme Kids ist bereit für die neue Ordersaison. Von Freitag, 14. Juli, bis Sonntag, 16. Juli, verwandelt sich das MTC world of fashion, Haus 1, Ingolstädter Straße 45, wieder in eine umfassende Kids-Welt, die alle wichtigen Trends und Strömungen in diesem Segment zeigt. Von Kids Fashion bis hin zu Kinderaccessoires zeigt die Supreme Kids konzentriert auf den knapp 10.000 m² Fläche des MTC world of fashion alles, was es für die Ordersaison Frühjahr/Sommer 2024 bedarf.

Unter dem Motto „Manege frei" hat das Supreme Kids Team gemeinsam mit Projektleiterin Sybille A. Mutschler eine spannende Erlebniswelt konzipiert. Mit Partnern wie der französischen CWF-Group (Children Worldwide Fashion) und ihren Labels wie Hugo, Boss und Billieblush und neu PVH Brand Germany mit den Marken Tommy Hilfiger und Calvin Klein an der Seite der Supreme Kids verwandelt sich die Halle 5 in einen Treffpunkt für Groß und Klein.

Die Supreme Kids ist bereit für die neue Ordersaison. Von Freitag, 14. Juli, bis Sonntag, 16. Juli, verwandelt sich das MTC world of fashion, Haus 1, Ingolstädter Straße 45, wieder in eine umfassende Kids-Welt, die alle wichtigen Trends und Strömungen in diesem Segment zeigt. Von Kids Fashion bis hin zu Kinderaccessoires zeigt die Supreme Kids konzentriert auf den knapp 10.000 m² Fläche des MTC world of fashion alles, was es für die Ordersaison Frühjahr/Sommer 2024 bedarf.

Unter dem Motto „Manege frei" hat das Supreme Kids Team gemeinsam mit Projektleiterin Sybille A. Mutschler eine spannende Erlebniswelt konzipiert. Mit Partnern wie der französischen CWF-Group (Children Worldwide Fashion) und ihren Labels wie Hugo, Boss und Billieblush und neu PVH Brand Germany mit den Marken Tommy Hilfiger und Calvin Klein an der Seite der Supreme Kids verwandelt sich die Halle 5 in einen Treffpunkt für Groß und Klein.

„Die Premiere der Eventfläche im Winter hat gezeigt, wie wichtig eine Erlebniswelt auf der Supreme Kids Orderplattformen ist. Mit der erneuten Kooperation und einem neuen starken Partner zeigen wir auch in dieser Saison, dass der gesunde Mix aus modernen Orderflächen und einer entspannten Aktionsfläche der richtige Weg für eine erfolgreiche Veranstaltung ist.“ so Aline Müller-Schade, Geschäftsführerin der The Supreme Group.

Neu dabei sind u.a. PVH mit TOMMY HILFIGER und CALVIN KLEIN, PAMINA KIDS, ALWERO und DIE GRÄFIN.

Hinzu kommen bereits etablierte und langjährige Labels wie JACK&JONES, BONDI, JOHA, LEEVJE und PLAYSHOES, die die außergewöhnliche Bandbreite der Orderplattform unterstreichen.

Source:

The Supreme Group

16.06.2023

Techtextil India hosting SITRA’s Expo on Medical Textiles

On the side-lines of the three-day fair, Techtextil India’s 2023 edition scheduled from 12th –14th September, will be hosting SITRA’s Expo on Medical Textiles called MEDITEXTM2023 - an exclusive pavilion that focuses on medical textiles with live demonstrations and high-growth application areas offering a global platform for business opportunities.

On the side-lines of the three-day fair, Techtextil India’s 2023 edition scheduled from 12th –14th September, will be hosting SITRA’s Expo on Medical Textiles called MEDITEXTM2023 - an exclusive pavilion that focuses on medical textiles with live demonstrations and high-growth application areas offering a global platform for business opportunities.

Medical textiles are fabrics that are used in the healthcare industry for a variety of purposes ranging from maintenance of hygiene, prevention/control of infection to saving the life of critically ill patients. In recent years, the demand for medical textiles has been growing in India due to rise in geriatric population, accidents and life style diseases. Besides, various initiatives of Governments, increased awareness about hygiene, medical tourism and advancements in textile technology are driving the growth of medical textile industry in India. According to a report published by Ministry of Textiles on the Indian Technical Textiles market, the market potential of medical textiles market at 5% is valued approximately at USD 1.125 billion in the year 2021-22.
 
SITRA is a Textile Research Association, sponsored by the industry and supported by the Ministry of Textiles (MoT), with the contribution to the textile industry for more than 65 years. Its Centre of Excellence for Medical Textiles, established by MoT in 2008, has been organising MEDITEX - an International Medical Textile Expo cum Conference in 2014 and 2018 respectively. This exclusive fair for medical textiles has been offering a global platform for business opportunities in the varied application of medical textiles which has witnessed a good participation from the industry. For 2023, the expo will be held as a part of Messe Frankfurt India’s Techtextil India 2023.

Target topics based seminars, supported by Ministry of Textiles, Government of India would also be held concurrently along with the exhibition wherein the speakers would be discussing about current and evolving technologies in medical textiles. Stakeholders and visitors to the conference as well as the exhibition would get to witness and benefit from world class, state-of-the-art medical textiles products/machineries and technologies.

Source:

Messe Frankfurt (HK)

(c) INDA
16.06.2023

Registration for FiltXPO™ 2023 is now open

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

Source:

INDA, Association of the Nonwoven Fabrics Industry

Photo: Pexels
12.06.2023

VIATT 2024: New textile fair in Vietnam

With combined regional, global, and industry specific expertise, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Following the signing of a memorandum of understanding (MOU) in late March, Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE) announced the new international fair for the entire textile value chain. The three-day platform will be staged at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

Commenting on the new event, Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, said: “With Intertextile Apparel in Shanghai a prime example, our Texpertise Network provides the ideal global framework from which to launch this diverse, comprehensive platform for the integrated textile supply chain. VIATT itself will capture the essence of Texpertise in one platform – a diverse, one-stop sourcing event for buyers across all categories, from garments, fabrics, yarns and fibres, to textile machinery, technical textiles and nonwovens, and everything in between.”

With combined regional, global, and industry specific expertise, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Following the signing of a memorandum of understanding (MOU) in late March, Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE) announced the new international fair for the entire textile value chain. The three-day platform will be staged at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

Commenting on the new event, Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, said: “With Intertextile Apparel in Shanghai a prime example, our Texpertise Network provides the ideal global framework from which to launch this diverse, comprehensive platform for the integrated textile supply chain. VIATT itself will capture the essence of Texpertise in one platform – a diverse, one-stop sourcing event for buyers across all categories, from garments, fabrics, yarns and fibres, to textile machinery, technical textiles and nonwovens, and everything in between.”

Discussing the event’s potential, Mr Le Hoang Tai, Deputy Director General of the Vietnam Trade Promotion Agency (VIETRADE), said: “Vietnam is one of the world’s leading textile producers and exporters, and going from strength to strength as one of Southeast Asia’s manufacturing hubs. Our establishment has many years of experience organising trade fairs throughout Vietnam, and together with Messe Frankfurt we are excited to help international fairgoers unlock the potential of the country’s fast-growing textile market. In addition, Ho Chi Minh City’s accessibility, and Vietnam’s proximity to other leading textile-producing nations such as Bangladesh, Cambodia, China and India, make it the logical venue to host an event of this nature.”

Many international textile manufacturers have been expanding operations into Vietnam, augmenting an already strong domestic industry. According to the Vietnam Textile and Apparel Association (VITAS), the country’s textile and garment industry achieved staggering annual growth of 20 – 26% from 2018 – 2022. Participation in international trade agreements such as the Regional Comprehensive Economic Partnership (RCEP), the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), the EU–Vietnam Free Trade Agreement (EVFTA), and the Indo-Pacific Economic Framework for Prosperity (IPEF)[2], bodes well for future growth.

As one of the world’s biggest importers of textile machinery, and a consistent importer of fabrics, yarns and fibres, garment production is the cornerstone of Vietnam’s industry. The country utilises cotton and functional materials to produce casualwear, childrenswear, swimwear, workwear, and much more, with sportswear an especially fast-growing category, and high-utility garments expected to achieve high exports.

By linking textile players from across Asia, Europe and beyond with this market, VIATT 2024 is willing to play an important part in shaping the future of Vietnam’s industry. Next year’s fair will host an extensive mix of international and domestic exhibitors covering multiple textile sub-sectors, including garments, apparel fabrics and accessories, yarns and fibres, digital printing, home textiles, technical textiles and nonwovens, textile processing, textile machinery, and more.

Exhibitors and buyers can utilise the fair’s global business matchmaking service, where connections are made based on the specific needs of each party. In addition to the fair’s main function as an international trading platform, its fringe programme will facilitate participants’ networking with industry leaders and offer diverse market insights via various seminars, forums, and panel discussions.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE). Covering the entire textile industry value chain, the inaugural edition will be held from 28 February – 1 March 2024 at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

More information:
Vietnam
Source:

Messe Frankfurt (HK) Ltd,

09.06.2023

EFI Reggiani showcases its innovations at ITMA 2023

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

The EFI Reggiani ecoTERRA solution is an all-in-one solution for water-based pigment printing that requires no ancillary equipment for pre- and post-treatment. By reducing water, energy and chemicals consumption in the overall process, customers can now obtain a sustainable, direct-to-fabric printing solution. For the first time at ITMA, EFI Reggiani is presenting its full ecoTERRA line up of four models, including a 340 printing width, with speeds ranging from 150 to 600 sqm/hour. This allows customers to choose the best TCO/ROI based on output volume and speed range.
 
Reggiani ecoTERRA water-based pigment inks deliver excellent wet and dry fastness properties, sharpness in detail, and durability while also ensuring printhead longevity with reduced maintenance costs. Thanks to the enhanced polymerisation and finishing unit, EFI Reggiani ecoTERRA also provides an enhanced tactile experience and fabric softness.
 
In addition to highlighting EFI Reggiani’s sustainable product offering, the company will also demonstrate the significant productivity and efficiency advantages offered by its portfolio of high-speed, high-performance digital textile printers at ITMA 2023. Attendees will discover how mass production can transition to a digital, on-demand workflow with the high speeds and high print quality of the EFI Reggiani HYPER scanning printer and the next-generation EFI Reggiani BOLT XS single-pass textile printer.

Visitors to the booth also will see EFI Reggiani’s new proprietary end-to-end digital printing workflow and the latest enhancements to EFI Inèdit digital textile software. Inèdit, now part of EFI Reggiani, is one of the leading developers of raster image processors (RIPs) and related software for digital industrial textile printing. The EFI Reggiani end-to-end workflow with Inèdit integration boosts productivity and production capabilities for digital textile print operations while ensuring maximum security for customer’s designs thanks to two-level encryption.
 
EFI Reggiani QUERY, the user-friendly, advanced data analysis tool to measure printer performance, keep track of real costs per metre, and monitor water and energy consumption, will also be demonstrated.

(c) Kornit Digital
09.06.2023

Kornit Digital presents Enhanced Presto MAX at ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

At ITMA 2023, Kornit will also be displaying an end-to-end partner ecosystem – underscoring how integrated solutions ensure a smooth transition towards a digital infrastructure and enable long-term business growth. Highlighting the power of partnership alongside Kornit is Greentex.co, a supplier of textiles and apparel leveraging digitally enabled, eco-friendly waterless printing. The company will be showing Presto MAX with fabrics highlighting the depth of black inks. Working alongside Kornit, Zünd will demonstrate how its modular cutting systems is the foundation for an end-to-end “eco factory,” completing fashion decorated by Presto MAX with their digital cutting solutions. Pentek Textile Machinery joins to display the possibilities for inline, sustainable softening of fabrics for unique and demanding applications.

(c) Messe Düsseldorf
07.06.2023

In-store Asia presents an industry with a sense of new departures

At the 14th edition more than 4,500 visitors from the retail industry gathered in Mumbai from 1 to 3 June to exchange views on the latest products and solutions specifically for the Indian retail market. Exhibitors on over 7,500 m2 demonstrated where the future of the Indian retail sector is headed. This year's event offered new product segments and profiles, bringing the spotlight to sustainability and focusing on the growth of the overall industry.

The Indian retail market is one of the fastest growing retail markets in the world and a key driver for the Indian economy, something that was also reflected by numerous positive conversations where fruitful synergies were created and long-term relationships were established. Appealing retail design, shopper marketing strategies and visual merchandising were the highlights of the exhibits on the show floor. The trade visitors were also distinguished by a high level of decision-making skills and brand experience expertise.

At the 14th edition more than 4,500 visitors from the retail industry gathered in Mumbai from 1 to 3 June to exchange views on the latest products and solutions specifically for the Indian retail market. Exhibitors on over 7,500 m2 demonstrated where the future of the Indian retail sector is headed. This year's event offered new product segments and profiles, bringing the spotlight to sustainability and focusing on the growth of the overall industry.

The Indian retail market is one of the fastest growing retail markets in the world and a key driver for the Indian economy, something that was also reflected by numerous positive conversations where fruitful synergies were created and long-term relationships were established. Appealing retail design, shopper marketing strategies and visual merchandising were the highlights of the exhibits on the show floor. The trade visitors were also distinguished by a high level of decision-making skills and brand experience expertise.

Thomas Schlitt, Managing Director, Messe Düsseldorf India, points out: “We are very delighted with the brilliant response received from the retail industry for In-store Asia 2023. The event has yet again made its mark by bringing together relevant business opportunities for both exhibitors and visitors. In-store Asia 2023 had something for everyone looking to network and learn from peers and associates in the industry. The event has always been a key meeting point for bellwethers, innovators, distributors, brands and retailers. The 2023 edition has been greatly appreciated for the futuristic ideas and solutions presented both on the expo floor as well as through the dialogues at the convention. I am certain that the connections made here will result in great business prospects for all.”

Elke Moebius, Director Retail & Retail Technology at Messe Düsseldorf, also draws a positive conclusion: “In-store Asia has again confirmed its position as a platform for retail innovations, impressive customer journeys, and shopper-focused strategies that stage physical stores as vibrant, appealing shopping destinations that can captivate and thrill shoppers. Everyone attending here could feel this sense of new departures and investment in the Indian retail sector.”

The 3-day event was accompanied by a Convention under the heading “Humanise, Hybridise, Hyper Localise Retail Experience” where more than 30 speakers delivered talks on such topics as retail research, visual merchandising, shopper marketing and design innovations, to name but a few. Another highlight was the presentation of the coveted VM & RD Retail Design Awards, for which India’s top talents from the Retail Design, Visual Merchandising and Manufacturing sectors competed with each other in 23 distinct categories of store design and window display. At the VM Challenge, six teams of visual merchandisers from renowned brands and companies demonstrated the day before how they conceptualise and realise a shop window within one hour under a given theme and design brief.

Source:

Messe Düsseldorf

(c) EREMA
07.06.2023

EREMA presents a new solution for PET fibre-to-fibre recycling

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

PET is regarded as a key material for the production of synthetic fibres. Around two thirds of the total volume of PET goes into the production of PET fibres for the textile industry. This highlights the importance of high-quality recycling solutions for the circular economy. By combining proven INTAREMA® technology with a new IV optimiser, EREMA succeeds in processing shredded PET fibre materials heavily contaminated by spinning oils in such a way that the finest fibres can be produced again from the recycled pellets. The system, which now joins EREMA's machine portfolio as the INTAREMA® FibrePro:IV, is characterised by a longer residence time of the PET melt. This is an essential factor for achieving high quality recycled pellets, as it allows the spinning oils and other additives used to improve the handling of the fibres during manufacturing to be removed more efficiently than in conventional PET recycling processes. Following extrusion, by polycondensation the intrinsic viscosity (IV) of the PET melt is increased in the new IV optimiser and under high vacuum to the precise level that is needed for fibre production. "Including filtration the output quality that we achieve with this recycling process is so high that ultra-fine fibres of up to 2 dtex can be produced using these rPET pellets, with an rPET content of 100 percent," says Markus Huber-Lindinger, Managing Director at EREMA. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

While the focus of the fibre and textiles application is currently still on PET fibre recycling, EREMA is committed to driving forward the recycling of mixed fibre materials from classic textile recycling collection in a next project phase. In order to accelerate development work, the EREMA Group opened its own fibre test centre, where a cross-company team is working on recycling solutions for fibre-to-fibre applications. The centre also operates a fully equipped and variable industrial-scale recycling plant. It includes the peripheral technology required and is available to customers for trials.

More information:
EREMA ITMA Fibers Recycling
Source:

EREMA Group

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Source:

Mimaki Europe B.V.

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic © Fraunhofer ITWM
Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic
05.06.2023

Fraunhofer ITWM, Siriotek und bematic bündeln Vliesstoff-Expertise

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Seit fast 50 Jahren ist die italienische Firma bematic in der Vliesstoffproduktion tätig. Die Entwicklung von fortschrittlicher Air-Lay-Produktionsprozesse steht bei dem Unternehmen im Fokus sowie die Konstruktion, Herstellung und Prüfung von Hochleistungskardieranlagen für Vliesstoffe. Die Ingenieure des Schweizer Unternehmens Siriotek konzentrieren sich auf Simulationen und Tests, die die praktische Problemlösung unterstützen. Das Fraunhofer ITWM bringt sowohl Wissen als auch Erfahrung in der Textiltechnik und der Prozessoptimierung ein und steuert Know-how in der mathematischen Modellierung sowie Charakterisierung von Air-Lay-Prozessen für Stapelfasern bei.

Die drei Partner wollen gemeinsam die nächste Generation von Krempelmaschinen entwickeln, die Leistung und Qualität bei der Air-Lay-Verarbeitung mit Stapelfasern gewährleisten und gleichzeitig Energieverbrauch, Abfallerzeugung und Kohlenstoffemissionen reduzieren. Die Zusammenarbeit bündelt das Fachwissen und die Innovationskraft der Dreien in ihren jeweiligen Bereichen.
 
Schneller, dichter, effizienter
Air-Lay-Technologien sorgen für die thermische, mechanische und chemische Vliesverfestigung. Hierbei wird das Rohmaterial geöffnet und mit einer Walze in einen Luftstrom eingebracht. Dieses Luft-Faser-Gemisch landet auf einem Band und wird dort durch Absaugung verdichtet. »Durch einen gemeinschaftlichen Ansatz erweitern wir die Grenzen der Air-Lay-Technologie, um höhere Produktionsgeschwindigkeiten, eine bessere Gleichmäßigkeit des Vlieses und eine bessere Faserausnutzung zu erreichen sowie letztendlich Lösungen zu liefern, die vollständig auf die individuellen Produktionsanforderungen zugeschnitten sind«, erklärt Giovanni Di Lorenzo, Gründer und Chefingenieur von Siriotek.
 
Zusätzlich minimiert das Projekt so den ökologischen Fußabdruck, ohne dabei die Leistung zu beeinträchtigen. »Wir treiben den Fortschritt voran, verbessern die Produktionsqualität und tragen zu einem nachhaltigeren sowie effizienteren Ökosystem in der Textilindustrie bei«, ergänzt Dietmar Hietel, Leiter der Abteilung »Transportprozesse« am Fraunhofer ITWM. Auch Giovanni Bettarini, Partner und kaufmännischer Leiter bei bematic, ist vom Projekt überzeugt: »Durch diese Zusammenarbeit werden wir in der Lage sein, unseren Kunden Fertigungslösungen für verschiedene Anwendungen in den Bereichen Automobil, Bau, Filtration und Geotextilien anzubieten.«

Source:

Fraunhofer ITWM

(c) Messe Frankfurt (HK) Ltd
02.06.2023

Over 366 Exhibitors at Cinte Techtextil China 2023

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

Multiple domestic and international exhibitors have confirmed their participation at Cinte Techtextil China 2023, with the European Zone playing host to FMMG and other key industry players, such as:

  • Bekaert, Belgium
  • Fil Man Made Group, Italy
  • SANITIZED, Switzerland
  • SCANTECH, France

Outside the European Zone, additional international suppliers will showcase their diverse product applications at the fairground, with categories including Coating & Bondtec (Stahl); Fibre & Yarn (Barnet); Nonwovens Equipment (Dilo); Technology & Machinery (Picanol); and Testing Equipment & Certification (TESTEX). Other European exhibitors in these categories include Autefa Solutions, Reifenhauser Heinsberg, Reifenhauser Reicofil, and SICAM.

Chinese suppliers set to complement international contingent
A comprehensive range of domestic exhibitors are eager to meet new buyers and renew old business connections at this year’s fair, including:

  • Shanghai Shenda Kebao New Materials
  • SIJIA New Material (Shanghai)
  • Zhejiang Jinda New Materials
  • Zhejiang Hailide New Material

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Source:

Messe Frankfurt (HK) Ltd

Foto: Globetrotter/Niklas Voeckler
02.06.2023

Globetrotter stellt „Re:Think Store“ auf der Outdoor by ISPO vor

Mit seinem ersten Re:Think Store in Bonn hat der Hamburger Outdoor-Ausrüster Globetrotter vor kurzem ein zukunftsweisendes Vorreiterprojekt für den Retail an den Start gebracht. Ab dem Wochenende (04. bis 06. Juni 2023) präsentiert das Unternehmen sein Konzept auf dem Sustainability Hub der Fachmesse Outdoor by ISPO.

Auf mehreren Ausstellungstafeln informiert Globetrotter die Besucherinnen und Besucher des Sustainability Hub über das Re:Think-Konzept. Über einen QR-Code können weiterführende, multimedial aufbereitete Informationen über das Projekt abgerufen werden. Im Rahmen einer Führung durch den Hub stellt CSR-Manager Fabian Nendza das Store-Konzept am Montag, den 5. Juni, persönlich vor und ist als Ansprechpartner vor Ort.

Mit seinem ersten Re:Think Store in Bonn hat der Hamburger Outdoor-Ausrüster Globetrotter vor kurzem ein zukunftsweisendes Vorreiterprojekt für den Retail an den Start gebracht. Ab dem Wochenende (04. bis 06. Juni 2023) präsentiert das Unternehmen sein Konzept auf dem Sustainability Hub der Fachmesse Outdoor by ISPO.

Auf mehreren Ausstellungstafeln informiert Globetrotter die Besucherinnen und Besucher des Sustainability Hub über das Re:Think-Konzept. Über einen QR-Code können weiterführende, multimedial aufbereitete Informationen über das Projekt abgerufen werden. Im Rahmen einer Führung durch den Hub stellt CSR-Manager Fabian Nendza das Store-Konzept am Montag, den 5. Juni, persönlich vor und ist als Ansprechpartner vor Ort.

Das Besondere am Re:Think-Konzept: Bei der Einrichtung des neuen Stores wurden fast ausschließlich bereits vorhandene, gebrauchte Materialien verwendet. Von den Regalen über die Vorhänge der Umkleidekabinen bis hin zur Teststrecke für Wanderschuhe und den Schrott-Bären im Eingangsbereich: Das gesamte Inventar des Vormieters Conrad Electronic sowie weitere, gebrauchte Einrichtungsgegenstände und Materialien aus dem Globetrotter-Lagerbestand wurden kreativ weiterverwendet – und damit große Mengen CO2 und Material eingespart. Wie viel genau, das lässt Globetrotter aktuell wissenschaftlich durch die Expertinnen und Experten von EPEA untersuchen. Die Ergebnisse werden in den kommenden Monaten erwartet.

Source:

Globetrotter Ausrüstung GmbH

(c) KARL MAYER GROUP
02.06.2023

KARL MAYER GROUP with sustainable technical textiles at ITMA

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

The KARL MAYER GROUP also supports its customers with well thought-out Care Solutions. The new support offers include retrofit packages for retrofitting control and drive technology for weft insertion and composite machines, and service packages that bundle various services. These include machine inspections and the replacement of all drive belts. The customer benefits from fixed prices that cover the costs of technician assignments, various discount options and transparent services.

A new solution for the vertical greening of cities is presented from the field of application for technical textiles. The core of the innovation is a grid textile produced on warp knitting machines with weft insertion by KARL MAYER Technische Textilien GmbH. The knitted lattice fabric is made of flax. It is used as a climbing aid for fast-growing plants, and after the greening phase, in autumn, it can be recycled together with these plants as biomass in pyrolysis plants to produce electricity and activated carbon. In summer, the planted sails lower the ambient temperature through evaporation effects. In addition, photosynthesis creates fresh air and binds CO2. Other important advantages are low soil requirements and flexible placement in public spaces. The greening system was developed by the company Micro Climate Cultivation, OMC°C, with the support of KARL MAYER Technische Textilien.

The KARL MAYER GROUP will also be exhibiting a sustainable composite solution made from natural fibres. The reinforcing textile of the innovative lightweight material is a multiaxial non-crimp fabric, which was also produced from the bio-based raw material flax on a COP MAX 4 from KARL MAYER Technische Textilien. The boatbuilding specialist GREENBOATS uses natural fibre composites to achieve sustainable products. The fact that it succeeds in this is shown, for example, by the Global Warming Potential (GWP): 0.48 kg of CO2 per kilogram of flax reinforcement compares with 2.9 kg of CO2 per kilogram of glass textile.

Source:

KARL MAYER Verwaltungsgesellschaft mbH

02.06.2023

HeiQ at ITMA 2023

HeiQ will display its biobased textile solutions for allergen reduction, odor control, and dynamic cooling at ITMA Milano 2023. The event will take place from the 8th to the 14th of June at Fiera Milano in Italy, where HeiQ will also showcase HeiQ AeoniQ™, its cellulosic fiber and flagship advancement in biobased textile technologies.

The focal point of the HeiQ exhibition at ITMA Milano 2023 will be the company’s biobased textile technologies. These innovations address one of the major challenges faced by the textile industry, making fabrics more functional while contributing to a sustainable future.

The ready-to-use HeiQ technologies on display are HeiQ Allergen* Tech, providing synbiotic protection in home textiles and unmatched defense against inanimate allergens, HeiQ Cool, the dual-action cooling that keeps one cool and comfortable, even in the most demanding conditions, HeiQ Mint, the botanical odor control that provides plant-based and effective odor management, and HeiQ Fresh, for sustainable odor control.

HeiQ will display its biobased textile solutions for allergen reduction, odor control, and dynamic cooling at ITMA Milano 2023. The event will take place from the 8th to the 14th of June at Fiera Milano in Italy, where HeiQ will also showcase HeiQ AeoniQ™, its cellulosic fiber and flagship advancement in biobased textile technologies.

The focal point of the HeiQ exhibition at ITMA Milano 2023 will be the company’s biobased textile technologies. These innovations address one of the major challenges faced by the textile industry, making fabrics more functional while contributing to a sustainable future.

The ready-to-use HeiQ technologies on display are HeiQ Allergen* Tech, providing synbiotic protection in home textiles and unmatched defense against inanimate allergens, HeiQ Cool, the dual-action cooling that keeps one cool and comfortable, even in the most demanding conditions, HeiQ Mint, the botanical odor control that provides plant-based and effective odor management, and HeiQ Fresh, for sustainable odor control.

Additionally, HeiQ will present a glimpse into the future with HeiQ’s groundbreaking carbon-positive continuous filament yarn, HeiQ AeoniQ™, that turned from an idea into a breakthrough piece of garment in just 15 months.

This cellulosic fiber has the objective to render polyester and nylon obsolete until 2030 and has attracted the support and active engagement of global partners who saw HeiQ AeoniQ™ as the solution to change the future of the textile industry.

Source:

HeiQ Materials AG

(c) Epson
31.05.2023

Epson: Neuer Drucker für komplexe Designs auf Textilien

Epson hat auf der diesjährigen Fespa an seinem Stand seinen neuen DTG-Drucker SureColor SC-F2200 vorgestellt. Der neue SureColor SC-F2200 wurde speziell für die Bedürfnisse von Start-ups und Unternehmen mit bis zu mittelgroßen Auflagen entworfen, die für ihre Produktionslinien Flexibilität sowie hohe Präzision bei niedrigen Durchlaufzeiten erwarten.

Der SureColor SC-F2200 wurde speziell für den Druck komplexer Designs auf vielen Textilien entwickelt. Seine Epson PrecisionCore MicroTFP Druckköpfe sorgen für eine hohe Druckgeschwindigkeit, was sich in einer Produktivitätssteigerung von bis zu 25 Prozent  gegenüber seinem Vorgängermodell SC-F2100 niederschlägt. Dabei wird die ohnehin schon gute Druckqualität des F2100 noch verbessert.

Sein kompaktes Design und flache Oberseite ermöglichen seinen Aufbau auch in beengten Umgebungen. Im Lieferumfang enthalten ist Software Epson GarmentCreator Version 2, die zusätzliche Designmöglichkeiten eröffnet. So erlaubt sie nicht nur die Wahl zwischen DTG- und DTF-Film-Druck, sondern verbessert auch die Wiedergabe feiner Linien und kleiner Schriften.

Epson hat auf der diesjährigen Fespa an seinem Stand seinen neuen DTG-Drucker SureColor SC-F2200 vorgestellt. Der neue SureColor SC-F2200 wurde speziell für die Bedürfnisse von Start-ups und Unternehmen mit bis zu mittelgroßen Auflagen entworfen, die für ihre Produktionslinien Flexibilität sowie hohe Präzision bei niedrigen Durchlaufzeiten erwarten.

Der SureColor SC-F2200 wurde speziell für den Druck komplexer Designs auf vielen Textilien entwickelt. Seine Epson PrecisionCore MicroTFP Druckköpfe sorgen für eine hohe Druckgeschwindigkeit, was sich in einer Produktivitätssteigerung von bis zu 25 Prozent  gegenüber seinem Vorgängermodell SC-F2100 niederschlägt. Dabei wird die ohnehin schon gute Druckqualität des F2100 noch verbessert.

Sein kompaktes Design und flache Oberseite ermöglichen seinen Aufbau auch in beengten Umgebungen. Im Lieferumfang enthalten ist Software Epson GarmentCreator Version 2, die zusätzliche Designmöglichkeiten eröffnet. So erlaubt sie nicht nur die Wahl zwischen DTG- und DTF-Film-Druck, sondern verbessert auch die Wiedergabe feiner Linien und kleiner Schriften.

Der SC-F2200 bietet eine Reihe weiterer Funktionen für eine einfache Bedienung. Dies ermöglicht es Unternehmen, auch ohne spezialisiertes Personal ein hohes Produktions- und Qualitätsniveau zu erzielen. Der Status eines Druckauftrages kann mithilfe des transparenten Deckels sowie der integrierten Beleuchtung jederzeit und unkompliziert kontrolliert werden. Das Gerät lässt sich über einen 4,3 Zoll (10,9 cm) großen Touchscreen intuitiv bedienen. Dank der automatischen Höhenverstellung des Druckbereiches arbeitet der SC-F2200 bei nur minimalen Eingriffen des Benutzers zuverlässig. Selbst der Bedruck dicker Kleidungsstücke wird auf diese Weise schnell und einfach erreicht, weil sich die Höhe der Druckfläche auch von Hand verstellen lässt.

Source:

Epson Deutschland GmbH

Photo: Munich Fabric Start
26.05.2023

20 YEARS OF BLUEZONE

The fully booked international denim trade show BLUEZONE will celebrate its anniversary. More than 100 denim and sportswear specialists will transform Munich's Zenith area into a blue hotspot on this summer's early July date, which has been repositioned for the first time. Parallel to MUNICH FABRIC START and THE SOURCE and with a supporting program that is as full to the brim as it is relevant, the area on Munich's Lilienthalallee will become the hub of the international fashion community.

2023 is not only BLUEZONE's anniversary year: this summer marks the 150th anniversary of the patenting of jeans, Orta celebrates its 70th birthday in 2023 and denim icon Ruedi Karrer celebrates the 50th of his "The Jeans Museum" in Zurich. Vicunha is celebrating its 55th birthday. BLUEZONE therefore pays tribute to denim in all its facets. CONNEXXION is the appropriate leitmotif of the upcoming event.

The fully booked international denim trade show BLUEZONE will celebrate its anniversary. More than 100 denim and sportswear specialists will transform Munich's Zenith area into a blue hotspot on this summer's early July date, which has been repositioned for the first time. Parallel to MUNICH FABRIC START and THE SOURCE and with a supporting program that is as full to the brim as it is relevant, the area on Munich's Lilienthalallee will become the hub of the international fashion community.

2023 is not only BLUEZONE's anniversary year: this summer marks the 150th anniversary of the patenting of jeans, Orta celebrates its 70th birthday in 2023 and denim icon Ruedi Karrer celebrates the 50th of his "The Jeans Museum" in Zurich. Vicunha is celebrating its 55th birthday. BLUEZONE therefore pays tribute to denim in all its facets. CONNEXXION is the appropriate leitmotif of the upcoming event.

"We have a line-up that will almost break the two days: in addition to internationally relevant and well-known exhibitors such as Calik, Denim Authority, Isko, Kurabo, Naveena Denim, NDL, Orta, Royo, Saitex and Sharabati among many others, we will have a 360° degree denim experience park in the completely booked Zenith Area", says Frank Junker, Creative Director & Partner, Munich Fabric Start Exhibitions GmbH. What visitors can expect here, among other things: two seminar sessions by the Transformers Foundation as well as panels and talks with Women in Denim, Mohsin Sajid and The 5 Denim Senses by AMD Düsseldorf, plus installations such as the photo exhibition "The World's best Denim Fades" by Bryan Szabo, founder of the Indigo Invitational, the exhibition by designer Ksenia Schnaider and a special presentation by "The Jeans Museum" Zurich, through which Ruedi Karrer himself will give guided tours.

For the first time, BLUEZONE will take place this summer on the new, earlier dates of July 18 and 19 and not at the end of August / beginning of September as in the past. With this step forward in terms of dates, MUNICH FABRIC START and BLUEZONE are reacting to changed order and collection rhythms and will position themselves in the future at the beginning of the purchasing and sourcing phase.

To this end, the exclusive VIEW Premium Selection, also organized by Munich Fabric Start Exhibitions GmbH, will move to the previous MFS date and on September 13 and 14 - then for the first time also on the Zenith grounds - will offer the market an additional, later ordering opportunity as RE:VIEW.

Source:

Munich Fabric Start

bluezone Foto: Munich Fabric Start
25.05.2023

20 JAHRE BLUEZONE

Am 18. und 19. Juli 2023 feiert die ausgebuchte, internationale Denim Trade Show BLUEZONE runden Geburtstag. Über 100 Denim- und Sportswear-Spezialisten verwandeln an dem neu positionierten, frühen Juli-Termin die Münchener Zenith- Area in einen blauen Hotspot. Parallel zu MUNICH FABRIC START und THE SOURCE und mit einem umfangreichen Rahmenprogramm wird das Gelände an der Münchener Lilienthalallee zum Treffpunkt der internationalen Fashion Community.

2023 ist nicht nur das Jubiläumsjahr der BLUEZONE: Die Patentierung der Jeans jährt sich zum 150. Mal, Orta feiert 2023 seinen 70. Geburtstag und Denim-Ikone Ruedi Karrer begeht den 50. seines The Jeans Museum in Zürich. Vicunha feiert den 55. Geburtstag. Die BLUEZONE würdigt deshalb Denim in allen Facetten. CONNEXXION lautet deshalb das Leitmotiv der kommenden Veranstaltung.

Am 18. und 19. Juli 2023 feiert die ausgebuchte, internationale Denim Trade Show BLUEZONE runden Geburtstag. Über 100 Denim- und Sportswear-Spezialisten verwandeln an dem neu positionierten, frühen Juli-Termin die Münchener Zenith- Area in einen blauen Hotspot. Parallel zu MUNICH FABRIC START und THE SOURCE und mit einem umfangreichen Rahmenprogramm wird das Gelände an der Münchener Lilienthalallee zum Treffpunkt der internationalen Fashion Community.

2023 ist nicht nur das Jubiläumsjahr der BLUEZONE: Die Patentierung der Jeans jährt sich zum 150. Mal, Orta feiert 2023 seinen 70. Geburtstag und Denim-Ikone Ruedi Karrer begeht den 50. seines The Jeans Museum in Zürich. Vicunha feiert den 55. Geburtstag. Die BLUEZONE würdigt deshalb Denim in allen Facetten. CONNEXXION lautet deshalb das Leitmotiv der kommenden Veranstaltung.

„Wir haben ein Line-Up, das die zwei Tage fast sprengt: Neben international relevanten und namenhaften Ausstellern wie Calik, Denim Authority, Isko, Kurabo, Naveena Denim, NDL, Orta, Royo, Saitex und Sharabati werden wir in der komplett ausgebuchten Zenith-Area einen 360° Grad Denim-Erlebnispark haben,“ so Frank Junker, Creative Director & Partner, Munich Fabric Start Exhibitions GmbH. Was die Besucher hier unter anderem erwartet: zwei Seminarsessions der Transformers Foundation sowie Panels und Talks mit Women in Denim, Mohsin Sajid und The 5 Denim Senses der AMD Düsseldorf, zusätzlich Installationen wie die Fotoausstellung „The World‘s best Denim Fades“ von Bryan Szabo, Gründer der Indigo Invitational, die Ausstellung der Designerin Ksenia Schnaider und eine Sonderpräsentation des „The Jeans Museum“ Zürich, durch die Ruedi Karrer Führungen geben wird.

Erstmals wird die BLUEZONE in diesem Sommer zu einem früheren Daten am 18. und 19. Juli stattfinden und nicht wie in der Vergangenheit Ende August / Anfang September. Mit diesem terminlichen Schritt reagieren MUNICH FABRIC START und BLUEZONE auf veränderte Order- und Kollektionsrhythmen und positionieren sich zukünftig zu Beginn der Einkaufs- und Sourcingphase.

Dafür rückt die ebenfalls von der Munich Fabric Start Exhibitions GmbH veranstaltete, exklusive VIEW Premium Selection auf den bisherigen MFS-Termin und wird am 13. und 14. September – dann erstmals ebenfalls auf dem Zenith-Gelände – dem Markt als RE:VIEW eine zusätzliche, spätere Ordermöglichkeit anbieten.

Source:

Munich Fabric Start

(c) SHIMA SEIKI MFG., LTD.
24.05.2023

SHIMA SEIKI at ITMA 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

Of the 9 knitting machines SHIMA SEIKI is exhibiting, 8 machines will be part of the Next-Generation lineup, ranging from WHOLEGARMENT® knitting machines and computerized flat knitting machines to glove knitting machines. More than 300 items will be on display as proposals for knitted applications in various fields ranging from fashion, sports, shoes, bags and accessories to medical, safety, automotive, aeronautical and other wearable and industrial textile applications.

In addition to machine technology, SHIMA SEIKI's SDS-ONE APEX series computer graphic design system and software will be shown with their latest software upgrades that feature significant improvements in knit programming, 3D functions and speed. Demonstrations will be available for a comprehensive fashion tech solutions package based on realistic virtual sampling and supported by various digital solutions and web services.

More information:
Shima Seiki ITMA 2023 ITMA
Source:

SHIMA SEIKI MFG., LTD.

24.05.2023

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials
Source:

VDMA e.V.