From the Sector

Reset
6 results
Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

(c) Lindauer DORNIER GmbH
Maja Dornier (lhs) and Prof. Dr. Wolf Mutschler (rhs) hand over the Peter Dornier Foundation Award, endowed with 5,000 euros, to the award winner Dipl.-Ing. Mathis Bruns
26.07.2022

Peter Dornier Foundation Prize 2022 honours textile research on woven heart valve

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

The human heart is a high-performance machine: over the course of a person's life, it beats almost three billion times, pumping around 200 million litres of blood through the body. Enormous stresses that can sometimes lead to life-threatening signs of wear and tear. If a heart valve gets out of step, patients usually get artificial-mechanical or biological valves as a replacement. However, mechanical solutions imply patients to take blood-thinning medication for the rest of their lives. In addition, there may be audible closing noises. For example, almost a quarter of patients with mechanical heart valves complain of sleep disturbances. Biological heart valves, on the other hand, such as those made from animal tissue, require a great deal of manual work and have a shorter lifetime.

Potential of weaving for medical products demonstrated
For this reason, Graduate Engineer Mathis Bruns at the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) at the TU Dresden is researching an implant alternative made of fabric. As part of a research project that also involved heart surgeons from the Dresden Heart Centre and the University Hospital in Würzburg, Mr. Bruns provided important findings for weaving an artificial heart valve in his diploma thesis. For his work entitled "Development of tubular structures with integrated valve function", Mathis Bruns has now received the Peter Dornier Foundation Prize 2022, endowed with 5,000 euros. In his laudation, Dr. Adnan Wahhoud, former head of the development department of air-jet weaving machines at DORNIER in Lindau, said: "With his work, the winner of the award demonstrates very clearly the potential of weaving technology to produce fabrics of complex form, geometry and structure with the aim of prolonging and improving people's lives." The award-winning thesis enriches research into three-dimensional tissues for use in medicine.

Weaving replacement heart valves without seams
"A particular advantage of our approach is the integral production method", says foundation prize winner Mathis Bruns. “The geometry and function of a heart valve is that complex that woven heart valves could not be produced in this form previously. Through the combined use of a rigid rapier weaving machine with bobbin shield and a Jacquard machine, it is possible to weave the replacement heart valve in such a way that it no longer has be sewn together. Even the tubular structures for the blood vessels and the integrated valve function are ‘all of one piece’. Seams are always a weak point in textile medical products," Mr. Bruns adds. “Another advantage of the woven heart valve is the possibility to insert it by the help of minimally invasive surgery. Hence, the folded valve which is about the size of a tea light is to be pushed with a catheter via the bloodstream to the target position in the heart and unfolded there. The patient's chest and heart would then no longer have to be cut open”, explains prize winner Mr. Bruns.

Textile structure is similar to human tissue
A wide variety of medical products have always been produced on DORNIER weaving machines. Customers use them to produce fabrics for bandages, prostheses, blood filters and orthoses among other things. For Mathis Bruns, it is only evident that implants such as heart valves will more and more be woven on the machines from Lindau in the future. "Textile tissue is very similar to human tissue," he says. The human body consists largely of thread-like materials, just as a textile fabric is made up of thousands of individual threads. "Muscle fibres convey force impulses, nerve tracts send stimuli such as pain and brain cells convey information via thread-like dendrites and axons." Because of their ‘thread-like properties’, woven implants are therefore particularly suitable for medical applications.

TU Dresden: Forscherteam der ITM mit biomimetisches Trommelfellimplantat für Otto von Guericke-Preis der AiF 2021 nominiert (c) AiF e.V.
Dipl.-Ing. Lukas Benecke, Dr.-Ing. Dilbar Aibibu, Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen (v.l.n.r)
25.11.2021

TU Dresden: Forscherteam der ITM für Otto von Guericke-Preis der AiF 2021 nominiert

Das interdisziplinär aufgestellte Forscherteam von der TU Dresden, bestehend aus Dr.-Ing. Dilbar Aibibu und Dipl.-Ing. Lukas Benecke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden sowie Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen von der Klinik und Poliklinik für Hals-, Nasen- und Ohrenheilkunde (HNO) der Medizinischen Fakultät der TU Dresden, wurde für die Entwicklung eines biomimetischen Trommelfellimplantats, die maßgeblich in dem IGF-Forschungsvorhaben 20533 BR umgesetzt worden ist, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Das interdisziplinär aufgestellte Forscherteam von der TU Dresden, bestehend aus Dr.-Ing. Dilbar Aibibu und Dipl.-Ing. Lukas Benecke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden sowie Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen von der Klinik und Poliklinik für Hals-, Nasen- und Ohrenheilkunde (HNO) der Medizinischen Fakultät der TU Dresden, wurde für die Entwicklung eines biomimetischen Trommelfellimplantats, die maßgeblich in dem IGF-Forschungsvorhaben 20533 BR umgesetzt worden ist, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Prof. Chokri Cherif, Institutsdirektor des ITM freut sich mit seinem Team sehr über die kontinuierlichen interdisziplinären Forschungserfolge auf dem stetig wachsenden Forschungsfeld der faserbasierten Biomedizintechnik, die am ITM in enger Kooperation mit Medizinern und Anwendern stetig erzielt werden. „Bereits im letzten Jahr wurden wir mit der Entwicklung neuartiger textiler Herzklappenprothesen als eines der drei Finalistenteams des Otto von Guericke-Preises 2020 geehrt. Die Nominierung für diesen hochkarätigen Preis ist eine erneute Bestätigung für den Bedarf an unserer praxisorientierten Forschung und eine besondere Würdigung, aber gleichzeitig auch weiterer Ansporn.

Über 30 Millionen Menschen leiden jährlich an den Folgen eines defekten Trommelfells. Ohne fachmedizinische Behandlung kann dies zu dauerhaften Schäden und schwerem Hörverlust führen. Zur Rekonstruktion des Trommelfells, der sogenannten Myringoplastik, werden heute körpereigene Knorpelhaut, Faszie oder synthetische Materialien eingesetzt. Da deren Materialeigenschaften nicht denen des natürlichen Trommelfells entsprechen, ist eine vollständige Rehabilitation des Gehörs damit nicht möglich.

Wissenschaftlerinnen und Wissenschaftler vom ITM und HNO-Klinik der TU Dresden entwickelten im Rahmen des IGF-Vorhabens „Simulationsgestützte Entwicklung einer flexiblen Technologie zur Umsetzung biomimetischer, langzeitresorbierbarer funktionaler und stabiler Trommelfellimplantate MyringoSeal)“ ein biomimetisch aufgebautes künstliches Trommelfellimplantat, das die körpereigenen Schwingungseigenschaften exakt wiedergibt. Die neuartige Membran ermöglicht eine vollständige Wiederherstellung der Schwingungseigenschaften des Trommelfells. Die Herstellung solcher Implantate ist mithilfe der Elektrospinntechnologie aus den Biomaterialien Seidenfibroin und Polycaprolacton möglich.

Source:

TU Dresden - ITM

(c) ITM/TU Dresden
10.11.2021

Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 an Dr.-Ing. Martin Hengstermann

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Dr.-Ing. Martin Hengstermann wurde mit dem mit 5.000 EUR dotierten Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 für seine am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden erarbeiteten Dissertation „Entwicklung von Hybridgarnen aus recycelten Carbonfasern und Polyamid 6-Fasern für thermoplastische Verbundbauteile mit hohem Leistungsvermögen“ geehrt.

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Dr.-Ing. Martin Hengstermann wurde mit dem mit 5.000 EUR dotierten Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 für seine am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden erarbeiteten Dissertation „Entwicklung von Hybridgarnen aus recycelten Carbonfasern und Polyamid 6-Fasern für thermoplastische Verbundbauteile mit hohem Leistungsvermögen“ geehrt.

Gegenstand der Dissertation ist die Entwicklung und Umsetzung von neuartigen Hybridgarnen aus recycelten Carbonfasern (rCF) und Polyamid (PA) 6-Fasern für thermoplastische Verbundbauteile. Diese Hybridgarne können die hervorragenden mechanischen Eigenschaften der rCF im Gegensatz zu bisherigen Lösungen in hohem Maße ausnutzen. Bedingt durch deren spezielle Fasereigenschaften (insbesondere hohe Querkraftempfindlichkeit, Sprödigkeit und fehlende Kräuselung) wurde dafür die Prozesskette der konventionellen Stapelfasergarnherstellung, bestehend aus Krempel, Strecke und Flyer, umfangreich analysiert und technologisch-konstruktiv weiterentwickelt, wodurch erstmalig eine schonende und gleichmäßige Herstellung der Hybridgarne ermöglicht werden konnte.

Source:

Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

Aachen-Dresden-Denkendorf International Textile Conference 2021 (c) ITM/TU Dresden
Die ADD-ITC 2019 in Dresden
12.07.2021

Aachen-Dresden-Denkendorf International Textile Conference 2021

Die Aachen-Dresden-Denkendorf International Textile Conference wird in diesem Jahr vom 9. bis zum 10. November digital durchgeführt.

Programm und Themen:
 
Quo vadis Textilmaschinenkonzepte?

  • Flexibilisierung auf dem Weg zur Losgröße 1
  • Industrie 4.0
  • Neue Produkte durch Maschineninnovationen
  • Ressourcen- und Energieeffizienz

Chancen mit neuen Werkstoffen: Hochleistungsfasern und Faserverbundwerkstoffe

  • Carbonfasern, Keramikfasern, bio-basierte Fasern
  • Fasermodifizierung, Sekundärspinnen, Rezyklierstrategien, Prozesstechnologien
  • Formangepasste Faserverbünde, polymere Matrixmaterialien
  • Blick in neuartige Werkstoffe – Simulation und Prüfsysteme

Wettbewerbsvorteile und Nachhaltigkeit: Funktionalisierung, neue Ausrüstungen

  • Nachhaltige Beschichtungs- und Ausrüstungschemikalien
  • Beschichten, Laminieren
  • Umweltfreundliche Prozesse
  • Textildruck

Neue Herausforderungen: Medizintextilien / Medizintechnik

Die Aachen-Dresden-Denkendorf International Textile Conference wird in diesem Jahr vom 9. bis zum 10. November digital durchgeführt.

Programm und Themen:
 
Quo vadis Textilmaschinenkonzepte?

  • Flexibilisierung auf dem Weg zur Losgröße 1
  • Industrie 4.0
  • Neue Produkte durch Maschineninnovationen
  • Ressourcen- und Energieeffizienz

Chancen mit neuen Werkstoffen: Hochleistungsfasern und Faserverbundwerkstoffe

  • Carbonfasern, Keramikfasern, bio-basierte Fasern
  • Fasermodifizierung, Sekundärspinnen, Rezyklierstrategien, Prozesstechnologien
  • Formangepasste Faserverbünde, polymere Matrixmaterialien
  • Blick in neuartige Werkstoffe – Simulation und Prüfsysteme

Wettbewerbsvorteile und Nachhaltigkeit: Funktionalisierung, neue Ausrüstungen

  • Nachhaltige Beschichtungs- und Ausrüstungschemikalien
  • Beschichten, Laminieren
  • Umweltfreundliche Prozesse
  • Textildruck

Neue Herausforderungen: Medizintextilien / Medizintechnik

  • Sensorische und aktorische Medizinprodukte
  • Personalisierte Medizin
  • Neue Biomaterialien, drug delivery
  • Resorbierbare polymere Implantate zur Unterstützung regenerativer Prozesse

Neue Anwendungen, neue Märkte

  • Textiles Bauen, Architektur
  • Mobilität
  • Energie
  • Umwelt

Transfersession „Von der Idee bis zur Praxis“

  • Präsentation von Innovationen (z. B. Produkte, Technologien, Verfahren), die aus Forschungskooperationen, insbesondere über IGF/ZIM, erfolgreich in die Industrie transferiert werden
Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf