From the Sector

Reset
167 results
27.04.2020

Using chemistry to fight Covid-19: CHT Group expands product portfolio

In mid-March, CHT Germany GmbH, which specializes in specialty chemicals, took up production and distribution of hand disinfectant. Now the company is expanding its product portfolio by adding important medical supplies that can help fight Covid-19 (SARS-CoV-2). Starting immediately, CHT is providing its business customers with surface disinfectant, textile supplies for medical protective wear as well as supplies for test kits and face masks.

In mid-March, CHT Germany GmbH, which specializes in specialty chemicals, took up production and distribution of hand disinfectant. Now the company is expanding its product portfolio by adding important medical supplies that can help fight Covid-19 (SARS-CoV-2). Starting immediately, CHT is providing its business customers with surface disinfectant, textile supplies for medical protective wear as well as supplies for test kits and face masks.

Following increased demand for disinfectant in the wake of the new coronavirus, the CHT Group began already a month and a half ago to produce hand disinfectant at its factory in Dußlingen. Since then, more of its factories around the world had joined in. Now the CHT Group is complementing this offering by producing its own surface disinfectant based on ethanol. As with the hand disinfectant, the production of the surface disinfectant received a special approval, based on the expanded general ruling by the German Federal Agency  for Chemicals (BAuA). Both types of disinfectant use publicly available standard formulas for alcohol-based disinfectant from the World Health Organization (WHO). The sale of CHT’s surface disinfectant, which is available in 5-, 10- and 30-liter canisters, is exclusively for use by industry customers.

In addition, the CHT Group is manufacturing a range of textile-relevant products that provide protection from Covid-19. These include functional supplies for face masks for medical protective wear, as well as flocking for test kits. Through these offerings, the CHT Group also wants to support the textile sector, which has been strongly affected by the crisis.

More information:
surface disinfectant CHT Gruppe
Source:

CHT Gruppe

24.04.2020

Lenzing AG and Palmers Textil AG found Hygiene Austria LP GmbH

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

Source:

Lenzing AG

Interview mit dem vti-Vorstandsvorsitzenden Thomas Lindner (c) Thomas Imo
Interview mit dem vti-Vorstandsvorsitzenden Thomas Lindner
23.04.2020

Interview mit dem vti-Vorstandsvorsitzenden Thomas Lindner

  • Mund-Nasen-Masken aus heimischer Produktion sind wichtig, doch sie lösen die Probleme der Branche nicht
  • Interview mit dem vti-Vorstandsvorsitzenden Thomas Lindner zur Situation der ostdeutschen Textil- und Bekleidungsindustrie in der Corona-Krise

Chemnitz  -  Zahlreiche Textil- und Bekleidungshersteller in den neuen Bundesländern haben auf die Corona-Krise reagiert und kurzfristig Teile ihrer Produktion auf schützende Textilerzeugnisse sowohl für Risiko-Berufsgruppen als auch für die Bevölkerung umgestellt. Dazu gehört die Strumpfwerk Lindner GmbH, Hohenstein-Ernstthal, die neuerdings Mund-Nasen-Masken aus eigener Herstellung anbietet. Geschäftsführer Thomas Lindner ist Vorstandsvorsitzender des Verbandes der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e. V. (vti), Chemnitz, und Vizepräsident des Gesamtverbandes textil+mode e. V. (t+m), Berlin.

  • Mund-Nasen-Masken aus heimischer Produktion sind wichtig, doch sie lösen die Probleme der Branche nicht
  • Interview mit dem vti-Vorstandsvorsitzenden Thomas Lindner zur Situation der ostdeutschen Textil- und Bekleidungsindustrie in der Corona-Krise

Chemnitz  -  Zahlreiche Textil- und Bekleidungshersteller in den neuen Bundesländern haben auf die Corona-Krise reagiert und kurzfristig Teile ihrer Produktion auf schützende Textilerzeugnisse sowohl für Risiko-Berufsgruppen als auch für die Bevölkerung umgestellt. Dazu gehört die Strumpfwerk Lindner GmbH, Hohenstein-Ernstthal, die neuerdings Mund-Nasen-Masken aus eigener Herstellung anbietet. Geschäftsführer Thomas Lindner ist Vorstandsvorsitzender des Verbandes der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e. V. (vti), Chemnitz, und Vizepräsident des Gesamtverbandes textil+mode e. V. (t+m), Berlin.

Herr Lindner, der vti hat auf seiner Homepage bereits wenige Wochen nach Ausbruch der Corona-Krise in Deutschland eine Liste mit rund 30 Herstellern einschlägiger Produkte veröffentlicht. Wie ist es den Firmen gelungen, derart schnell zu reagieren?

Antwort:  Not macht bekanntlich erfinderisch. Wichtige Absatzmärkte sind quasi über Nacht weggebrochen. Zugleich wurde publik, dass es im Land einen riesigen Bedarf an Schutztextilien gibt, der offenbar nicht – wie gewohnt - mit Importen gedeckt werden kann. Der Vorteil kleiner und mittelständischer Firmen ist ihre Flexibilität. Viele Firmen haben rasch ihre Möglichkeiten geprüft und dann sofort mit der Produktion von Mund-Nasen-Masken begonnen. Dabei ist es von großem Vorteil, dass wir in Sachsen und Thüringen über ein gut funktionierendes Netz von Spinnereien, Webereien, Strickereien, Wirkereien, Herstellern von Vliesstoffen und Laminaten sowie Textilveredlern und Konfektionären verfügen. Viele  Firmenchefs in unserem Verbandsgebiet kennen sich sehr gut. Diese persönlichen Beziehungen erleichtern die Zusammenarbeit, vor allem, wenn Tempo gefragt ist wie im Fall der Corona-Krise.  Etliche Unternehmen kooperieren bereits seit mehreren Jahren im Rahmen des vom vti geleiteten Verbundprojekts „health.textil“ bei der Entwicklung, Herstellung und Vermarktung von Gesundheitstextilien. Dieses Projekt wollen wir mit Unterstützung des Freistaates Sachsen unbedingt fortführen und ausbauen. Die Notwendigkeit liegt auf der Hand.

Aller Voraussicht nach werden die Menschen hierzulande langfristig vorbeugende Maßnahmen gegen Infektionen mit dem Covid-19-Virus unternehmen müssen. Textilien spielen dabei eine große Rolle. Ist die heimische Branche dieser Herausforderung gewachsen?

In Ostdeutschland sind gegenwärtig rund 16.000 Menschen in der Textil- und Bekleidungsindustrie tätig, davon 12.000 in Sachsen und 2.500 in Thüringen. Hinzu kommt eine überdurchschnittlich stark ausgeprägte textile Forschungslandschaft. Viele Betriebe könnten ihre Produktion teilweise oder auch komplett auf Gesundheitstextilien umstellen. Um nur einige Beispiele zu nennen: Auto-Zulieferer sind in der Lage, textilbasierte Laminate für Schutzbekleidungen zu fertigen; Modehersteller können Bekleidung und andere textile Ausstattungen für Klinik und Pflege produzieren. Bereits jetzt bringen unsere Betriebe eine große Zahl der dringend benötigten Mund-Nasen-Masken auf den Markt. Dabei handelt es sich es sich in der Regel um vielfach verwendbare Produkte, die bei 60 bis 90 Grad Celsius gewaschen und bei Bedarf sterilisiert werden können. Zudem gibt es Varianten mit einem austauschbaren Spezialvliesstoff-Einsatz für den Mund-Nasen-Bereich. Die Masken sind für den Alltagsgebrauch im Handel, in Schulen, im Nahverkehr, in Physiotherapie- und Podologie-Praxen oder in Friseur- und Kosmetiksalons bestens geeignet. Wer also möchte, der kann qualitativ hochwertige textile Masken aus hiesiger Produktion verwenden. Auf unserer Homepage www.vti-online.de veröffentlichen wir eine Liste mit Links zu Herstellern bzw. deren Webshops. Das Angebot, das bis hin zu Masken für Kinder sowie Masken mit modischem Touch reicht, und kann sowohl gewerblich als auch privat geordert werden.  In absehbarer Zukunft werden erste Unternehmen auch zertifizierte Schutzmasken für klinische Anwendungen anbieten können.

Der Mangel an textilen Schutzausrüstungen war und ist in Deutschland mehr als offensichtlich. Wie lässt sich eine solche Situation künftig verhindern?

Sowohl die Bundes- als auch die Landesregierungen haben signalisiert, dass sie künftig auf deutlich mehr textile Schutzausrüstungen, insbesondere für Klinik und Pflege, aus deutscher bzw. europäischer Produktion zurückgreifen wollen.  Die Beschaffung erfolgte zuvor aus Kostengründen ja überwiegend aus dem asiatischen Markt. Viele hiesige Textilhersteller sind bereit, derartige strategisch wichtige Erzeugnisse zu produzieren. Doch dazu sind oft erhebliche Investitionen in neue Technologien notwendig. Damit Banken dafür Geld geben, brauchen die Firmen Planungssicherheit, also langfristige garantierte Abnahmemengen. Öffentliche wie private Auftraggeber müssen bereit sein, höhere Preise zu akzeptieren. Textilproduktion in Deutschland ist nun mal teurer als in den Niedriglohnregionen der Welt. Zu den Rahmenbedingungen der Textilproduktion hier gehören vergleichsweise hohe Löhne und Gehälter sowie enorme Energiekosten – zuzüglich EEG-Umlage und CO²-Besteuerung – um nur einige der Kostenfaktoren zu nennen.

Wie beurteilen Sie die aktuelle Gesamtsituation der Branche?

Fast alle Betriebe kämpfen gegenwärtig in dieser oder jener Form mit den Auswirkungen der Corona-Krise. Und ein Ende ist nicht abzusehen. Die Produktion von Mund-Nasen-Masken allein löst das riesenhafte Problem nicht. Etliche unserer Firmen sind als Zulieferer sehr stark an den Fahrzeug- oder Schiffbau gebunden. Sie befinden sich bereits jetzt in schwerem Fahrwasser. Andere Unternehmen arbeiten gerade noch Aufträge ab, doch sie erhalten keine neuen – weder aus dem In- noch aus dem Ausland. Die weltweite Rezession lässt grüßen. Wie andere Industriezweige müssen auch wir mit Entlassungen und Insolvenzen rechnen. 30 Jahre Aufbauarbeit in unserer ostdeutschen Branche stehen auf dem Spiel. Angesichts dieser Dramatik befinden wir uns mit den Landesregierungen von Sachsen und von Thüringen fortwährend im Gespräch. In diesem Zusammenhang verweise ich auf den Offenen Brief, den wir in dieser Woche dem sächsischen Ministerpräsidenten und den Mitgliedern des Landtages zugesandt haben.  

Source:

Verband der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e. V. (vti)

PREMIUM GROUP in Berlin is cancelling its shows (c) Boris Kralj
Anita Tillmann
22.04.2020

PREMIUM GROUP in Berlin is cancelling its shows

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

“We greatly regret the decision of course, especially after the success of our January events. The ban on large-scale events has been around for some time and has been publicly discussed. It hurts us to do it, but we are also conscious of our responsibility. If cancelling our trade shows, conferences and parties contributes to the safety of our customers and visitors, then we have to take this step.
 
We are in close contact with all our brands and partners and have spent the last four weeks discussing possible approaches, concepts and new focal topics for the summer. The bottom line is that digitalisation is clearly the focus. It’s all about using the time over the next few months sensibly. The timing for brands and retailers is now right – all market participants are aware of the necessity of this.

We have been working closely with JOOR, the leading B2B marketplace globally, for around a year, after successfully integrating our own digital platform, Veee.com. JOOR has digitalised the entire procurement process and ensures a seamless, functioning wholesale process on an international scale – both for brands and retailers.
 
We shall shortly be offering webinars on this and can offer our customers an optimal, digital ordering solution so as to use this time of the pandemic efficiently. We are very happy with this option and our year-long investment in the topic of digitalisation. This has come good for us now.
 
Our trade show formats have been about more than just ordering for a long time now. They are about encounters, emotion, inspiration, communication and, finally, the fashion community getting together. Although lots can take place digitally nowadays, it doesn't replace physically meeting up in person. We have seen this more than ever in the present situation.
 
We are going to work on new concepts for 2021, and we will liaise with the key stakeholders in Berlin and with all others too to ensure we hit the ground running again. We’re taking on the challenge and will come back to the industry when we have news.”

Logo monforts
Logo monforts
21.04.2020

Monforts: Industrial-scale testing for new PPE finishes

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

The three lines at the ATC situated at the Monforts HQ in Mönchengladbach, are of a true industrial scale and trialling new products on them goes beyond lab or pilot plant testing to rapidly identify any problems that might occur once full production is underway.

 

More information:
Monforts corona virus
Source:

AWOL Media

TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken © Mirko Krziwon_ITM/TU Dresden
TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken
21.04.2020

TU Dresden präsentiert textile 3D-gestrickte Mund-Nasen-Masken

  • Anforderungs- und passformgerechte textile 3D-gestrickte Mund-Nasen-Masken – Weitere Initiativen am ITM der TU Dresden

Seit dem 20. April 2020 gilt für das Bundesland Sachsen eine Maskenpflicht beim Einkaufen und im öffentlichen Personen- und Nahverkehr. Eine entsprechende Verordnung wurde hierfür am 17. April 2020 vom Freistaat Sachsen bekannt gegeben.

Aufgrund der neuerlassenen Allgemeinverfügung und der damit einhergehenden, notwendi-gen Schutzmaßnahmen zur Verringerung der Ausbreitung von COVID-19 wird das Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden nach der am 20. April 2020 erfolgten Wiederaufnahme des laborbasierten Forschungsbetriebes die bereits in der ITM-Pressemitteilung vom 31. März 2020 vorgestellte textile, 3D-gestrickte Mund-Nasen-Maske intensiv weiterentwickeln. Das ITM möchte damit einen wichtigen aktiven Beitrag zum Schutz der Gesundheit der Bevölkerung leisten.

  • Anforderungs- und passformgerechte textile 3D-gestrickte Mund-Nasen-Masken – Weitere Initiativen am ITM der TU Dresden

Seit dem 20. April 2020 gilt für das Bundesland Sachsen eine Maskenpflicht beim Einkaufen und im öffentlichen Personen- und Nahverkehr. Eine entsprechende Verordnung wurde hierfür am 17. April 2020 vom Freistaat Sachsen bekannt gegeben.

Aufgrund der neuerlassenen Allgemeinverfügung und der damit einhergehenden, notwendi-gen Schutzmaßnahmen zur Verringerung der Ausbreitung von COVID-19 wird das Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden nach der am 20. April 2020 erfolgten Wiederaufnahme des laborbasierten Forschungsbetriebes die bereits in der ITM-Pressemitteilung vom 31. März 2020 vorgestellte textile, 3D-gestrickte Mund-Nasen-Maske intensiv weiterentwickeln. Das ITM möchte damit einen wichtigen aktiven Beitrag zum Schutz der Gesundheit der Bevölkerung leisten.

Hierfür sind in den letzten Tagen die Kooperationen mit langjährigen Netzwerkpartnern des ITM wei-ter intensiviert worden. Gemeinsam mit der renommierten Textilmaschinenfirma H. Stoll AG & Co. KG aus Reutlingen ist es gelungen, mit dem am ITM erarbeiteten technologischen Know-how auf einer am ITM der TU Dresden installierten Flachstrickmaschine Stoll ADF 530-32 BW weitere Vari-anten neuartiger, textiler 3D-gestrickter Mund-Nasen-Masken erfolgreich umzusetzen.

Am ITM können somit Mund-Nasen-Masken-Varianten mit unterschiedlichsten Materialkombinatio-nen auf Flachstrickmaschinen von zwei Maschinenherstellern, die sich alle als waschbarer und damit wiederverwendbarer Mund-Nasen-Schutz eignen, anforderungs- und passformgerecht gefertigt wer-den. Je nach Materialzusammensetzung sind die Mehrwegmasken für Kochwäsche mit handelsübli-chen Waschmitteln bzw. bei 60° mit Desinfektionswaschmittel geeignet. Bei den Masken kann wahl-weise eine Tasche direkt im Fertigungsprozess integriert werden, in die temporär noch zusätzlich Fil-terstrukturen eingelegt werden können. Die gestrickten Mund-Nasen-Masken sind – intuitiv, schnell, unkompliziert in der Handhabung – auch für Brillenträger geeignet und erfordern beim Anlegen keine Hilfe einer weiteren Person. Mittels weiterer anforderungsgerechter Materialkombinationen können auch spezifische Eigenschaften, wie z. B. Atmungsaktivität, Tragekomfort und Hautverträglichkeit, ge-zielt eingestellt und diesbezüglich im Rahmen erster freiwilliger Versuchsreihen mit Mitarbeitern des ITM intensiv getestet werden.

Als eines der weltweit führenden Textilforschungsinstitute wird das ITM mit der lösungssystemati-schen Entwicklung anforderungsgerechter Mund-Nasen-Masken einen wichtigen gesellschaftlichen und nachhaltigen Beitrag für das Gemeinwohl der Bevölkerung leisten. Das Team des ITM, welches maßgeblich bei der Maskenentwicklung involviert ist, freut sich daher auf weitere Anfragen von Her-stellern und Produzenten, um mit dem erarbeiteten Fachwissen bzw. Erfahrungen und technologi-schem Know-how insbesondere die KMU der deutschen Textilindustrie beratend zu unterstützen und ggf. gemeinsame Allianzen/Kooperationen zu schmieden.

Bereits jetzt schon steht das ITM mit mehreren Industriepartnern in Kontakt, um die Technologie zur Fertigung von textilen 3D-gestrickten Masken schnell in die Serienproduktion zu überführen und dar-über hinaus diese anforderungsgerechten textilen Produkte auch zeitnah als nach den geltenden Standards bzw. Richtlinien zugelassene Schutzmasken anzubieten.

Für die zielführenden Untersuchungen mit variablen Materialkombinationen zur weiteren Op-timierung der unterschiedlichen Maskenvarianten wurden dem ITM bereits verschiedenste Versuchsmaterialien kostenfrei zur Verfügung gestellt. Das ITM bedankt sich hierfür bei folgenden Firmen: EMS-CHEMIE AG, Gebrüder Otto GmbH & Co. KG, TWD Fibres GmbH und W. Zimmermann GmbH & Co. KG.
 

Source:

Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)
 

Logo Parkdale Mills
Parkdale Mills supply swabs for covid-19 tests
20.04.2020

Parkdale Mills Collaborates to Supply Swabs for Coronavirus Tests

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

The FDA has determined that spun synthetic swabs can be used in COVID-19 testing based on the results from a clinical investigation stemming from its collaboration with UnitedHealth Group, the Gates Foundation and Quantigen.  

This is the second major COVID-19 relief project that Parkdale has helped. Earlier Parkdale constructed a supply chain that includes Hanes, Fruit of the Loom, and many other U.S. companies in the production of PPE masks needed by frontline medical staff treating the virus.

More information:
corona virus NCTO USA
Source:

NCTO

20.04.2020

NCTO Statement on Administration’s 90-Day Tariff Deferral

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today, voicing concern over the administration’s executive order instituting a non-reciprocal 90-day deferral on certain tariffs.
The temporary postponement of duties does not apply to products with antidumping or countervailing duties or those products subject to penalty duties under Section 232, 201 and 301.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today, voicing concern over the administration’s executive order instituting a non-reciprocal 90-day deferral on certain tariffs.
The temporary postponement of duties does not apply to products with antidumping or countervailing duties or those products subject to penalty duties under Section 232, 201 and 301.

“At a time when domestic textile producers and its workforce have mobilized to transform their production lines to manufacture the personal protective equipment (PPE) supplies for frontline healthcare and medical workers fighting the COVID-19 pandemic, the administration’s decision to defer duties for 90 days on the vast majority of products imported into the United States is counterproductive.
This move contradicts the administration’s top stated priority of rebuilding American manufacturing and buying American and could have severe negative implications for the entire U.S. textile industry, whose companies and workforce already are facing enormous economic hardship.
We support the need to temporarily eliminate barriers to the entry of emergency medical supplies and certain PPE inputs tied directly to the COVID-19 response. But make no mistake, the key drivers behind efforts to defer tariffs have nothing to do with facilitating access to PPE products or stopping the spread of COVID-19.
Our industry is being asked to do extraordinary things.  We are heeding that call, but we need help to ensure the supply chains we are creating overnight don’t evaporate tomorrow.  We need strong procurement policies and additional funding for our industries to ramp up and retool – not further measures that incentivize offshore production. We need to maximize the U.S. domestic production chain right now to every extent possible in helping fight COVID-19 and make the products American frontline workers desperately need.  

We need to provide immediate and substantial relief to our manufacturing sector and their workforce who are suffering enormously right now. It’s critical that we have a long-term U.S. government plan to ensure that we aren’t relying on offshore producers to make medically necessary, live-saving PPE.  We shouldn’t be providing handouts to reward the very companies that helped offshore these industries so many years ago.

Tariffs are one of the few mechanisms in place to help partially address the challenges U.S. manufacturers face in competing with imports from countries with exceptionally low wages, poor working conditions, and minimal environmental and safety standards.”, states the NCTO.

 

Source:

NCTO

16.04.2020

Rieter Annual General Meeting 2020

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

More information:
Rieter Rieter Holding Ltd.
Source:

Rieter Management AG

Logo Fairfield
Fairfield produces surgical gowns
08.04.2020

Fairfield Chair Pivots from Seating Production to Surgical Gowns

Fairfield Chair Co. has retooled its production of chairs and sofas to high-in-demand surgical gowns in an effort to help rush supplies to health care companies on the frontline of the COVID-19 pandemic.

When the spread of the coronavirus impacted Fairfield and the entire U.S. manufacturing sector, Fairfield executives jumped into action.

The seating manufacturer, which essentially took a crash course on apparel patternmaking and industry specs, has switched its production to surgical gowns overnight. In just over a week, Fairfield produced its first samples of the surgical gown and immediately received approval on the prototype from Blue Ridge Healthcare in North Carolina, which has placed an initial order for 1,200 surgical gowns.
Cotswold Industries worked closely with Fairfield to help the company pivot to gown and mask manufacturing and provide the materials needed for the finished products.

Fairfield Chair Co. has retooled its production of chairs and sofas to high-in-demand surgical gowns in an effort to help rush supplies to health care companies on the frontline of the COVID-19 pandemic.

When the spread of the coronavirus impacted Fairfield and the entire U.S. manufacturing sector, Fairfield executives jumped into action.

The seating manufacturer, which essentially took a crash course on apparel patternmaking and industry specs, has switched its production to surgical gowns overnight. In just over a week, Fairfield produced its first samples of the surgical gown and immediately received approval on the prototype from Blue Ridge Healthcare in North Carolina, which has placed an initial order for 1,200 surgical gowns.
Cotswold Industries worked closely with Fairfield to help the company pivot to gown and mask manufacturing and provide the materials needed for the finished products.

Fairfield is also tapping into the experience it gained from producing seating for senior living facilities, which require certain materials with antimicrobial finishes.
“We are very accustomed to working with antimicrobial fabrics however, we have never worked with wovens that are developed to meet specifications like this material has to,” states McClurd, vice President of imports of Fairfield.

More information:
corona virus respiratory masks
Source:

NCTO

Logos of the participating companies
Gerber PPE Task Force
08.04.2020

A&E and Burlington participate in the Gerber PPE Task Force

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

For over 40 years, Burlington has been in the Medical business manufacturing fabrics for use in operating theaters such as surgeon’s gowns, isolation gowns, sterilization wrapper packs, drapes, scrubs and lab coats. The Maxima® collection of fabrics is useful for reusable isolation and surgical gowns and meets AAMI standards for Levels 1-4 and FDA standards.

Source:

American & Efird

02.04.2020

SGL Carbon SE suspends guidance for the current fiscal year

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previous expectation, which guided for a slightly lower sales revenue und a recurring EBIT1 approximately 10-15% below the prior year (sales revenue 2019: €1,087m; recurring EBIT 2019: €48m), was already made conditional by the Board of Management in the management report published on March 12, 2020, that negative effects from the coronavirus were not included, as the outbreak at that time was mainly restricted to China and Italy. In the meantime, numerous other governments have introduced far-reaching measures with substantial limitations on the public and economic sectors and leading economists now forecast significant reductions in economic output in key economies. 

The Board of Management of SGL Carbon has introduced and partially already implemented comprehensive measures to reduce the cost base and to secure liquidity. These measures include the introduction of short-time work, reduction of material and indirect spend, as well as further reduction resp. postponement of capital expenditures. In addition, we are exploring further financing options independent of the capital markets, some of which are already in preparation. The Company is intensively working on identifying and mitigating potential risks. 

More information:
SGL Carbon Coronavirus
Source:

SGL Carbon

02.04.2020

NCTO Statement on Administration’s Reported Tariff Deferral

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

If the U.S. government makes tariff concessions during this crisis, it will be inviting a virtual tsunami of imports further devastating domestic manufacturing as it attempts to regain its footing.     

We urge the administration to abandon any moves to defer tariffs on finished products. It would only serve to allow importers to exploit the current crisis, while dealing a severe blow to U.S. manufacturing and its workers.  

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

  • U.S. employment in the textile supply chain was 585,240 in 2019. 
  • The value of shipments for U.S. textiles and apparel was $75.8 billion in 2019. 
  • U.S. exports of fiber, textiles and apparel were $29.1 billion in 2019. 
  • Capital expenditures for textile and apparel production totaled $2.5 billion in 2018, the last year for which data is available.
More information:
NCTO Coronavirus
Source:

NCTO

01.04.2020

Perlon® production is still running at all sites

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

In the current situation, the company is doing everything it can to fulfill its’ responsibility as an employer and also as a business partner. Therefore all hygiene measures at all our sites have been significantly increased so that our employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimize risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry.

The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high-quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high-quality cleaning system brushes.

More information:
Perlon Coronavirus
Source:

Perlon

Logo Perlon-Group
Perlon can continue with its production
30.03.2020

Perlon® production is still running at all sites in Germany, the USA and China

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

To manage the current situation responsibly, all hygiene measures at all our sites have been significantly increased so that the employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimise risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry
The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high quality cleaning system brushes.

More information:
corona virus Perlon filament
Source:

Perlon®

COVID-19 Restrictions (c) European Border and Coast Guard Agency
27.03.2020

COVID-19 Restrictions

In response to COVID-19, national governments have introduced a series of restrictions to slow the spread of the virus.
Attached is a map showing various constraints implemented by countries across Europe.

In response to COVID-19, national governments have introduced a series of restrictions to slow the spread of the virus.
Attached is a map showing various constraints implemented by countries across Europe.

Source:

FRONTEX European Border and Coast Guard Agency

DyStar (c) DyStar
27.03.2020

DyStar responds to COVID-19

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Emergency Response Plan (ERP)
DyStar’s manufacturing sites are also installed with an Emergency Response Procedure to cover all emergency circumstances, including the COVID-19 pandemic disease. The goal of the emergency response procedure is to mitigate the impact of such events on people and the environment, ensuring operational readiness of the site during an emergency.

As the world adjusts to the impact of the COVID-19 pandemic, DyStar will continue to monitor the situation very closely and will provide updates that adapt to the changing situation. We remain committed to provide our customers with excellent service and to work closely with all our partners throughout this difficult period.

More information:
Coronavirus DyStar
Source:

DyStar

Face Mask Production in Denim Expert Ltd (c) Denim Expert Ltd
Face Mask Production in Denim Expert Ltd
26.03.2020

Denim Expert Ltd are producing facing mask for safety issue

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on a non-profit basis
  • Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis
  • “Now is the time for our whole industry to stand together”

A leading Bangladeshi garment manufacturer is offering the manufacturing capacity of his world-class facility for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Mr. Uddin is offering the capacity, skills and production expertise of his factory and wants to develop partnerships to meet much-needed short-term demand for masks and PPE in the battle against COVID-19.

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on a non-profit basis
  • Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis
  • “Now is the time for our whole industry to stand together”

A leading Bangladeshi garment manufacturer is offering the manufacturing capacity of his world-class facility for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Mr. Uddin is offering the capacity, skills and production expertise of his factory and wants to develop partnerships to meet much-needed short-term demand for masks and PPE in the battle against COVID-19.

Those willing to partner with him and wishing to utilize his production capacity would only be asked to provide fabrics and raw materials as well as meeting workers’ wages.

More information:
Denim Expert Ltd.
Source:

Denim Expert Ltd

25.03.2020

autoneum: Annual General Meeting: waiver of dividend for 2019 financial year

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

The shareholders approved the 2019 Annual Report including the consolidated and annual finan-cial statements. Given the significant net loss in the 2019 financial year shareholders approved the proposal submitted by the Board of Directors to forgo a dividend. Hans-Peter Schwald, Chairman of the Board of Directors, stressed: “Autoneum aims to distribute at least 30% of net profit attributable to Autoneum shareholders as dividends. Unfortunately, Autoneum did not generate a profit in 2019, mainly due to impairments. This development is unacceptable for both, the Group Executive Board and the Board of Directors, and together with the employees we are doing every-thing possible to get back on the road to success. Nevertheless, the Board of Directors and the Group Management will continue to adhere to their long-standing dividend policy and thus ensure that shareholders participate appropriately in the Company's success.”


Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider, Peter Spuhler and Ferdinand Stutz, were confirmed in office. This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were also re-elected to the Compensation Committee. In addition, a large majority of the shareholders of Autoneum Holding Ltd gave formal discharge to all members of the Board of Directors and the Group Executive Board.

The consultative vote on the 2019 remuneration report was approved by 89.2%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2021 financial year as well as the other proposals were also approved by a large majority.

 

More information:
Autoneum
Source:

Autoneum Management AG

Devan (c) Devan
25.03.2020

Devan offers antiviral solutions for textiles' professional workers

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Over the past few weeks, Devan has received a lot of questions regarding an antiviral solution for textiles against Sars-COV-2, the virus that causes COVID-19. “Not a big surprise since we put BI-OME AV forward 3 years ago. Testing has been done in cooperation with Institut Pasteur de Lille”, says Devan CEO Sven Ghyselinck. Devan studied enveloped viruses (e.g. H1N1, Corona-types, etc.) as well as naked viruses (e.g. Rotavirus). For both virus families, BI-OME AV showed strong to excellent activity in wet state.

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Over the past few weeks, Devan has received a lot of questions regarding an antiviral solution for textiles against Sars-COV-2, the virus that causes COVID-19. “Not a big surprise since we put BI-OME AV forward 3 years ago. Testing has been done in cooperation with Institut Pasteur de Lille”, says Devan CEO Sven Ghyselinck. Devan studied enveloped viruses (e.g. H1N1, Corona-types, etc.) as well as naked viruses (e.g. Rotavirus). For both virus families, BI-OME AV showed strong to excellent activity in wet state.

In the first instance, the company wants to focus on professionals who need to stay working such as policemen, logistics workers, shop employees, day-care workers, … A common complication of respiratory viral disease can be a secondary bacterial infection. Professionals could be helped with either an anti-bacterial on their facemask to reduce the chance for these secondary bacterial infections, for better hygiene and less odor build-up. On workwear, a combination of a virus spread reducing and antibacterial solution could help as these garments are typically used during long hours, are non-disposable and most likely will be washed at home.

Devan has solutions which withstand washing while keeping its performance. BI-OME as a liquid product is EU BPR, Turkish BPR and US EPA registered. Depending on the rash region, commercialising treated articles be subject to additional local registration procedures.

More information:
Devan Coronavirus
Source:

Devan