From the Sector

Reset
6 results
KARL MAYER TURKEY appoints General Manager (c) KARL MAYER GROUP
Toros Greenhalgh, General Manager of KARL MAYER TURKEY
02.02.2024

KARL MAYER TURKEY appoints General Manager

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

More information:
Karl Mayer Manager Turkey
Source:

KARL MAYER GROUP

(c) VDMA
Chairperson and Vice Chairpersons of the VDMA Textile Machinery: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn New Chairperson of Textile Machinery Association

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

Dr. Janpeter Horn, Managing Director of August Herzog Maschinenfabrik, is the new Chairperson of the VDMA Textile Machinery. Dr. Horn was elected at the members’ meeting of the Association in Leonberg. The new Executive Board is completed with Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik and Ms. Verena Thies, Managing Shareholder of Thies Textilmaschinen, who were elected as Vice Chairpersons.

After his election, Dr. Horn stated: “I am pleased to have Ms. Brückner and Ms. Thies by my side. Both have been serving on the Executive Board of the VDMA Textile Machinery as well as the European Committee of Textile Machinery Manufacturers CEMATEX for many years. With this team, we are well prepared to effectively represent the interests of the industry at national and international level.”

Based in Oldenburg, Northern Germany, Herzog is a company with a long tradition and at the same time the most innovative developer and manufacturer of braiding and winding machinery. Worldwide references in braiding and winding technique confirm the company’s technical and quality leadership.

The new Executive Board of the VDMA Textile Machinery for the legislative period until 2026 is composed of:

  • Dr. Janpeter Horn (Chairperson), August Herzog Maschinenfabrik
  • Regina Brückner (Vice Chairperson), BRÜCKNER Trockentechnik
  • Verena Thies (Vice Chairperson), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Group
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Group
Source:

VDMA e. V.
Textilmaschinen

SwapKnit – KARL MAYER's first Smart Machine function (c) KARL MAYER
Kay Hilbert, Product Owner Global Tricot Machines at KARL MAYER
02.03.2022

SwapKnit – KARL MAYER's first Smart Machine function

  • Patterning from the cloud
  • SwapKnit – KARL MAYER's first Smart Machine function revolutionizes the way of guide bar control

A view of machine data from anywhere and at any time, service support as if on site but from far away, patterning from the cloud: digitalization offers completely new possibilities in warp knitting, which KARL MAYER is using to offer its customers a wide range of advantages for their business. In doing so, the world market leader is pursuing a well thought-out strategy: coordinated innovation activities are being used above all to rethink aftersales support and machine maintenance, and to develop coordinated offers in three areas. These are Care Solutions, Digital Solutions and Smart Machine.

Smart Machine comprises special functions that are backed by KARL MAYER's expertise and enable customers to maximize their productivity. In addition, a previously unattainable reproducibility of quality is possible.

  • Patterning from the cloud
  • SwapKnit – KARL MAYER's first Smart Machine function revolutionizes the way of guide bar control

A view of machine data from anywhere and at any time, service support as if on site but from far away, patterning from the cloud: digitalization offers completely new possibilities in warp knitting, which KARL MAYER is using to offer its customers a wide range of advantages for their business. In doing so, the world market leader is pursuing a well thought-out strategy: coordinated innovation activities are being used above all to rethink aftersales support and machine maintenance, and to develop coordinated offers in three areas. These are Care Solutions, Digital Solutions and Smart Machine.

Smart Machine comprises special functions that are backed by KARL MAYER's expertise and enable customers to maximize their productivity. In addition, a previously unattainable reproducibility of quality is possible.

A first solution for this is SwapKnit. The new patterning concept manages completely without pattern discs, but still enables the high operating speeds typical of mechanical guide bar drives. The basis for this is the networking of the machine via the k.ey device with the KM.ON cloud.

  • Speed of operation and pattern change
  • Lapping procurement per individual purchase or flat rate
  • Best article reproducibility

Further steps to follow
As the first Smart Machine offering, SwapKnit marks the start of digital innovations with which KARL MAYER offers its customers more benefits from its machines. Further innovations will follow.
"In our development activities, in addition to the important topics such as more speed and flexibility, we also have simplified handling and the possibilities of automation in mind. We want maximum efficiency with minimum operating effort," says Kay Hilbert.

 

Source:

KARL MAYER Verwaltungsgesellschaft mbH

VDMA: Mask production: Nothing runs without textile machinery (c) VDMA Textilmaschinen
21.07.2020

VDMA: Mask production: Nothing runs without textile machinery

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

Source:

VDMA Textilmaschinen

futureTEX Foto: KARL MAYER GmbH
01.08.2019

futureTEX: Drei Fragen an Dr. Jürgen Tröltzsch, Bereichsleiter Neue Technologien bei KARL MAYER Technische Textilien GmbH

Frage P3N Marketing: In welchem Vorhaben arbeiten Sie mit?

Antwort Jürgen Trötzsch: KARL MAYER engagierte sich im bereits abgeschlossenen Umsetzungsvorhaben TexKonzept. Zusammen mit sieben weiteren Partnern aus Forschung und Industrie wurde ein Konzept für zukunftsorientierte Textiltechnologien zur Herstellung endkonturnaher, belastungs- und prozessgerechter Textilstrukturen entwickelt. Textile Verstärkungsstrukturen für Faserverbundkunststoffe (FVK) werden aktuell noch als unspezifische Rollenware produziert. Um die Fertigungskosten bei FVK-Bauteilen zu senken, muss die Anpassung an Belastung und Aufgaben des Bauteils bereits im textilen Herstellungsprozess erfolgen. Denn der Leichtbau benötigt hochintegrierte Textilkomplexe, die u. a. produktspezifisch, bauteilnah, belastungsgerecht, mehrlagig und funktionalisiert sein müssen. Die Aufgabe des Vorhabens war die Analyse der zukünftigen Anforderungen an solche bisher nicht verfügbare Produkte und die Ableitung neuer Konzepte für Textiltechnologien und Textilmaschinen. Diese Bedürfnisse wurden praxisnah aus den Bereichen Automotive, Windkraft und Schiffbau erhoben.

Frage P3N Marketing: In welchem Vorhaben arbeiten Sie mit?

Antwort Jürgen Trötzsch: KARL MAYER engagierte sich im bereits abgeschlossenen Umsetzungsvorhaben TexKonzept. Zusammen mit sieben weiteren Partnern aus Forschung und Industrie wurde ein Konzept für zukunftsorientierte Textiltechnologien zur Herstellung endkonturnaher, belastungs- und prozessgerechter Textilstrukturen entwickelt. Textile Verstärkungsstrukturen für Faserverbundkunststoffe (FVK) werden aktuell noch als unspezifische Rollenware produziert. Um die Fertigungskosten bei FVK-Bauteilen zu senken, muss die Anpassung an Belastung und Aufgaben des Bauteils bereits im textilen Herstellungsprozess erfolgen. Denn der Leichtbau benötigt hochintegrierte Textilkomplexe, die u. a. produktspezifisch, bauteilnah, belastungsgerecht, mehrlagig und funktionalisiert sein müssen. Die Aufgabe des Vorhabens war die Analyse der zukünftigen Anforderungen an solche bisher nicht verfügbare Produkte und die Ableitung neuer Konzepte für Textiltechnologien und Textilmaschinen. Diese Bedürfnisse wurden praxisnah aus den Bereichen Automotive, Windkraft und Schiffbau erhoben.

Lesen Sie das ganze Interview in der angehängten PDF.

 

More information:
futureTex
Source:

P3N MARKETING GMBH

VDMA: Regina Brückner New Chairperson of Textile Machinery Association © VDMA
(v.l.n.r.): Chairperson and Vice Chairpersons of the Textile Machinery Association: Regina Brückner, Fritz P. Mayer, Verena Thies.
02.11.2017

VDMA: Regina Brückner New Chairperson of Textile Machinery Association

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

The new executive board for the legislative period until 2021 is composed of:
Regina Brückner (Chairperson), Brückner Trockentechnik
Verena Thies (Vice Chairperson), Thies
Fritz P. Mayer (Vice Chairman), Karl Mayer Textilmaschinenfabrik
Johann Phillip Dilo, Oskar Dilo Maschinenfabrik
Peter D. Dornier, Lindauer Dornier
Arno Gärtner, Karl Mayer Textilmaschinenfabrik
Roland Hampel, A. Monforts Textilmaschinen
Dr. Janpeter Horn, Herzog
Markus Kleindorp, Memminger-Iro
Martin Küppers, Saurer Schlafhorst
Georg Stausberg, Oerlikon Textile
Andreas Lukas, Andritz Küsters
Benjamin Mayer, Mayer & Cie.     
Eric Schöller, Groz-Beckert
Heinrich Trützschler, Trützschler

Source:

VDMA