From the Sector

Reset
214 results
22.06.2022

GOTS Standard revision process enters next phase

The ongoing revision process to the GOTS Standard document and supporting Manual for Implementation garnered a robust response during its first public comment period, which ended on June 13 and elicited over 300 inputs. Of that, about 60 percent of comments were related to technical criteria such as ecology, chemical inputs, and material quality; and around 30 percent concerned GOTS social criteria. The Standard sets forth the requirements for organic textiles throughout the entire processing chain. GOTS’s commitment to making every version stronger ensures that the Standard continues to be a dynamic and evolving document and remain at the forefront as the most recognized and respected global standard for textiles.

The first draft of the revised standard, GOTS version 7.0, was made available for an initial 60-day comment period. Stakeholders, associations, organisations, companies and individuals were encouraged to contribute to the revision of the Standard during this timeframe. The Standard is updated every three years, ensuring that GOTS keeps up with advances in the industry and developments in the science and technology of textile processing.

The ongoing revision process to the GOTS Standard document and supporting Manual for Implementation garnered a robust response during its first public comment period, which ended on June 13 and elicited over 300 inputs. Of that, about 60 percent of comments were related to technical criteria such as ecology, chemical inputs, and material quality; and around 30 percent concerned GOTS social criteria. The Standard sets forth the requirements for organic textiles throughout the entire processing chain. GOTS’s commitment to making every version stronger ensures that the Standard continues to be a dynamic and evolving document and remain at the forefront as the most recognized and respected global standard for textiles.

The first draft of the revised standard, GOTS version 7.0, was made available for an initial 60-day comment period. Stakeholders, associations, organisations, companies and individuals were encouraged to contribute to the revision of the Standard during this timeframe. The Standard is updated every three years, ensuring that GOTS keeps up with advances in the industry and developments in the science and technology of textile processing.

Beginning in 2022, the GOTS revision process is following a newly developed and more inclusive Standard Setting Procedure, which includes oversight of the process by a Standard Revision Committee (SRC). The SRC consists of experts from different stakeholder groups, including scientists, textile industry professionals, sustainability, sourcing and human rights specialists and others. Members work together throughout the entire revision process to establish terms of reference and make decisions on any changes.

The comments received are being compiled and will be available for viewing on the GOTS website shortly. For the next stage of the revision process, the SRC will deliberate all comments, and a second draft of the revision will be released for a second and final 30-day period of public input in September 2022, which will be announced on the GOTS website and social media. The final version of the revised standard, GOTS version 7.0 will be released in March 2023, and will come into effect one year later.

More information:
GOTS revision
Source:

GOTS

21.06.2022

SHIMA SEIKI to exhibit at Pitti Filati 91

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

The N.SIR123SP computerized knitting machine with intarsia capability features a special loop presser bed for producing hybrid inlay fabrics with both knit and weave characteristics. N.SIR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible.

APEXFiz™ is subscription-based design software that supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio. Staff at the SHIMA SEIKI booth will be donning knit uniforms produced as a collaborative effort between SHIMA SEIKI ITALIA, knitting companies and yarn companies.

Source:

SHIMA SEIKI MFG., LTD.

21.06.2022

First comprehensive sustainable chemistry index for the textile industry

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

The sustainable chemistry index will be reserved for substances that offer transparency on a number of additional indicators including the chemical’s circularity viability, greenhouse gas emissions during production, and the source of the raw materials. The sustainable chemistry index will also require that the downstream use of the chemical is optimized, meaning, for example, that it promotes resource saving in textile finishing. Additionally, excellent corporate governance paired with well-defined environmental and social (ESG) goals will be a pre-condition.

SCTITM is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Bluesign will implement and manage the sustainable chemistry index as an independent authority with a holistic approach to helping companies throughout the textile supply chain improve their sustainability performance.

20.06.2022

Suominen strengthens its capabilities in sustainable products

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

More information:
Suominen Sustainability nonwovens
Source:

Suominen

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

19.06.2022

DyStar Celebrates 125 Years of Indigo Excellence

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

Similarly, in recent modules under Cadira® Denim, DyStar introduced the first salt-free Indigo dyeing process in history. The applied technology completely eliminates hydrosulphite in the application of Indigo.

More information:
DyStar Indigo indigo dyeing process
Source:

Dystar

(c) Billi London
17.06.2022

Billi London: Accelerated degradation in Landfill

Billi London is shaping the future of fashion with eco legwear. Founded by Sophie Billi-Hardwick and Marie Bouhier in November 2020, the pair’s goal was to create durable and comfortable hosiery that was no longer seen as disposable or for single-use.
 
Each piece is made with innovative enhanced degradable yarns Amni Soul Eco® nylon and ROICA ™ V550 elastane. Amni Soul Eco® is degrading in a time of 5 years*, 20x faster than the normal 40–100-year timeframe. The materials break down into biomass and biogas, create renewable energy and do not leave behind microplastics in landfill. The soft yet chic fabrics have revolutionised the legwear industry as well as pioneering a change across the fashion sector which rarely goes beyond just using recyclable materials.

This year, Billi London was selected as one of only five brands to present as an Organic Exhibitor at the Salon International de la Lingerie (SIL) from 18-20 June at Porte de Versailles in Paris.

*In landfill conditions. Reference system: ASTM D5511 - Std test 

Billi London is shaping the future of fashion with eco legwear. Founded by Sophie Billi-Hardwick and Marie Bouhier in November 2020, the pair’s goal was to create durable and comfortable hosiery that was no longer seen as disposable or for single-use.
 
Each piece is made with innovative enhanced degradable yarns Amni Soul Eco® nylon and ROICA ™ V550 elastane. Amni Soul Eco® is degrading in a time of 5 years*, 20x faster than the normal 40–100-year timeframe. The materials break down into biomass and biogas, create renewable energy and do not leave behind microplastics in landfill. The soft yet chic fabrics have revolutionised the legwear industry as well as pioneering a change across the fashion sector which rarely goes beyond just using recyclable materials.

This year, Billi London was selected as one of only five brands to present as an Organic Exhibitor at the Salon International de la Lingerie (SIL) from 18-20 June at Porte de Versailles in Paris.

*In landfill conditions. Reference system: ASTM D5511 - Std test 

Source:

Billi London / C.L.A.S.S.

15.06.2022

Autoneum updates its outlook for 2022 as a result of the Ukraine war

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

In addition, renewed coronavirus-related lockdowns in China are delaying growth in Asia. According to the revised market forecasts1), global automobile production is expected to reach 80.4 million units in 2022, which represents an increase of 4.1% compared to 2021. Growth will thus be significantly lower than was still expected in mid-February.

Autoneum will do its utmost to minimize the impact on the Group. Despite the present challenges, the strategy will continue to be consistently implemented with a focus on innovative and sustainable technologies for growing markets of the future.

Based on current developments and knowledge, Autoneum has updated the forecasts that it presented at the Media Conference, which had not yet included the impacts of the war as outlined above. Autoneum continues to expect revenue to develop in line with the market. For the first half of the year, the Company expects an EBIT margin at break-even level. On the basis of the ongoing collaborative discussions with customers to participate in the sharing of the sharply increased energy and material costs, Autoneum anticipates an improvement in the EBIT margin to 2.0 to 3.0% (previously: 4.0 to 5.0%) for the full year 2022. Free cash flow for 2022 is expected to be in the mid to high double-digit million range.

Autoneum is very well positioned for the transformation of the automotive industry towards e-mobility and sustainability. Our product portfolio is suitable for all drive types, whether internal combustion, hybrid or pure electric vehicles. The medium-term forecasts that Autoneum published in November 2021 remain unchanged positive. The timing of the market recovery will be delayed by current events and will also depend on further geopolitical developments.

Source:

Autoneum Management AG

(c) ​Yanfeng
15.06.2022

Yanfeng honors its suppliers in Europe

Yanfeng, a global automotive supplier, recognized the performance of its European suppliers with its annual Supplier Awards. During a ceremony at the company’s European Headquarters in Neuss, a total of 13 suppliers yesterday received the awards in two categories.

With one Distinguished Supplier award and twelve Supplier Excellence awards in five sub-categories, YF evaluated its suppliers according to several criteria. The company’s vision of technology and innovation, as well as sustainability, were particularly important. Moreover, quality, cost, service and customer satisfaction were also assessed.

The award recipients from Europe were:

Distinguished Supplier Award:
- BASF Polyurethanes GmbH, Germany

Supplier Excellence Award – Quality:
- Industrias Alegre S.A., Spain

Supplier Excellence Award – Customer Satisfaction:
- DSSI International, LLC, Slovakia
- SIGIT d.o.o., Serbia

Supplier Excellence Award – Sustainability:
- HOFFMANN + VOSS GmbH, Germany

Supplier Excellence Award – Technology and Innovation:
- SemsoTec GmbH, Germany
- Lightworks GmbH, Germany

Yanfeng, a global automotive supplier, recognized the performance of its European suppliers with its annual Supplier Awards. During a ceremony at the company’s European Headquarters in Neuss, a total of 13 suppliers yesterday received the awards in two categories.

With one Distinguished Supplier award and twelve Supplier Excellence awards in five sub-categories, YF evaluated its suppliers according to several criteria. The company’s vision of technology and innovation, as well as sustainability, were particularly important. Moreover, quality, cost, service and customer satisfaction were also assessed.

The award recipients from Europe were:

Distinguished Supplier Award:
- BASF Polyurethanes GmbH, Germany

Supplier Excellence Award – Quality:
- Industrias Alegre S.A., Spain

Supplier Excellence Award – Customer Satisfaction:
- DSSI International, LLC, Slovakia
- SIGIT d.o.o., Serbia

Supplier Excellence Award – Sustainability:
- HOFFMANN + VOSS GmbH, Germany

Supplier Excellence Award – Technology and Innovation:
- SemsoTec GmbH, Germany
- Lightworks GmbH, Germany

Supplier Excellence Award – Service:
- CTP, Czech Republic
- Milsped d.o.o., Serbia
- Prewave GmbH, Austria
- Schneider Electric SE, France
- SPARETECH GmbH, Germany
- Weber GmbH & Co. KG, Germany

Source:

Yanfeng

(c) Bemberg™ by Asahi Kasei / C.L.A.S.S.
14.06.2022

Bemberg™ at Pitti Uomo 102 in partnership with MagnoLab

Bemberg™ is teaming up with MagnoLab, a network of Biella-based companies apt to carry out projects related to sustainability and circular economy, to create and display T-shirts that combine environmental responsibility and aesthetic research at the 102nd edition of Pitti Uomo.

Bemberg™ is used in shirts, cocktail dresses, dust coats, coordinates, outerwear and more by international brands operating in the fashion and luxury industries. To demonstrate its journey and evolution in contemporary style, Bemberg™ has collaborated with MagnoLab to develop a project that resulted in contemporary cut I-shirts presented both in sheer and blends with other certified fibers, including GOTS cottons and RWS wools, capable of enhancing both the hand of the final garment and the performance of the yarn.

Bemberg™ is teaming up with MagnoLab, a network of Biella-based companies apt to carry out projects related to sustainability and circular economy, to create and display T-shirts that combine environmental responsibility and aesthetic research at the 102nd edition of Pitti Uomo.

Bemberg™ is used in shirts, cocktail dresses, dust coats, coordinates, outerwear and more by international brands operating in the fashion and luxury industries. To demonstrate its journey and evolution in contemporary style, Bemberg™ has collaborated with MagnoLab to develop a project that resulted in contemporary cut I-shirts presented both in sheer and blends with other certified fibers, including GOTS cottons and RWS wools, capable of enhancing both the hand of the final garment and the performance of the yarn.

The project conceived for Pitti Uomo 102 stems from the spirit of Bemberg™ and fits perfectly into the philosophy of MagnoLab, whose mission is to carry out projects related to environmental responsibility through a joint and participatory approach of partners, and to create value by developing innovative products and processes with rapid testing cycles, according to a lean management model.

Source:

Bemberg™ by Asahi Kasei / C.L.A.S.S.

(c) ISKO
10.06.2022

ISKO™ purchased new weaving machines by Itema

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

As a result, ISKO’s Headquarters extend the company's long-term relationship with Itema,
strengthening the company’s position as the mill with one of the world’s largest denim capacities. The new rapier machines are enhanced by the iSAVER® technology, a breakthrough mechatronic innovation that eliminates the waste selvedge on the left side of the fabric, allowing for saving in energy and raw materials, cutting in half the cotton waste that typically results from the weft yarn. All types of ISKO’s innovative fabrics, with a multitude of different constructions and fiber mixtures, can now be produced using these advanced weaving technologies, with a special focus given to the R-TWO™ technology in terms of its sustainable credentials.

More information:
Isko Itema weaving machine
Source:

ISKO / Menabò Group srl

(c) Borealis
10.06.2022

Borealis-Strategy 2030: Sustainability in the centre

  • Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
  • Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
  • Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

  • Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
  • Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
  • Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

* See attached document for more information.

Source:

Borealis / ikp

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Source:

Archroma / EMG

Thermore launches EVOdown® made of recycled fibers (c) Thermore
09.06.2022

Thermore launches EVOdown® made of recycled fibers

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

More information:
Thermore Down Fibers plastics Recycling
Source:

Thermore

09.06.2022

GFA: New sustainability actions at Global Fashion Summit

The Global Fashion Summit was hosted by Global Fashion Agenda (GFA) in Copenhagen on 7-8 June. The event was centred around the theme ‘Alliances for a New Era’ and convened over 900 leaders from brands, retailers, NGOs, policy, manufacturers, and innovators to drive urgent action.

Attendees heard from 112 speakers including HRH The Crown Princess of Denmark; Marie-Claire Daveu, Chief Sustainability & institutional Affairs Officer, Kering; Leo Rongone, CEO, Bottega Veneta; Thierry Andretta, CEO, Mulberry; Lily Cole, Author & Podcaster on climate solutions and Advisor for UNECE; Nicolaj Reffstrup, Founder, GANNI; Maximillian Bittner, CEO, Vestiaire Collective; Paul Polmon, Co-Author, Net Positive; Bobby Kolade, Fashion Designer; Halide Alagöz, Chief Product Officer, Ralph Lauren Corporation; Aditi Mayer, Sustainable fashion blogger and labor rights activist; Lindita Xhaferi Salihu, Fashion Charter Lead, UNFCCC; and more.

Multiple companies, such as GFA, Ralph Lauren, Apparel Impact Institute, Fashion Revolution, GANNI, TrusTrace and Mulberry, chose to announce their latest sustainability measures at the landmark event.

The Global Fashion Summit was hosted by Global Fashion Agenda (GFA) in Copenhagen on 7-8 June. The event was centred around the theme ‘Alliances for a New Era’ and convened over 900 leaders from brands, retailers, NGOs, policy, manufacturers, and innovators to drive urgent action.

Attendees heard from 112 speakers including HRH The Crown Princess of Denmark; Marie-Claire Daveu, Chief Sustainability & institutional Affairs Officer, Kering; Leo Rongone, CEO, Bottega Veneta; Thierry Andretta, CEO, Mulberry; Lily Cole, Author & Podcaster on climate solutions and Advisor for UNECE; Nicolaj Reffstrup, Founder, GANNI; Maximillian Bittner, CEO, Vestiaire Collective; Paul Polmon, Co-Author, Net Positive; Bobby Kolade, Fashion Designer; Halide Alagöz, Chief Product Officer, Ralph Lauren Corporation; Aditi Mayer, Sustainable fashion blogger and labor rights activist; Lindita Xhaferi Salihu, Fashion Charter Lead, UNFCCC; and more.

Multiple companies, such as GFA, Ralph Lauren, Apparel Impact Institute, Fashion Revolution, GANNI, TrusTrace and Mulberry, chose to announce their latest sustainability measures at the landmark event.

Innovation Forum connected fashion companies with sustainable solution providers
This year’s Summit also presented an Innovation Forum, enabling small and large companies to meet with 24 sustainable solution providers – equipping them with the tools to turn words into meaningful actions. More than 300 facilitated business meetings between fashion companies and sustainable solution providers took place during the two days of the Summit.

Photo: Texaid
07.06.2022

TEXAID enables Textile-to-Textile Recycling

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

More information:
Texaid Recycling
Source:

Texaid

07.06.2022

EPTA World Pultrusion Conference 2022 explores composites sustainability

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

Source:

European Pultrusion Technology Association EPTA

03.06.2022

B.I.G. is ready for a sustainable future

With an annual report entitled 'Here.We.Go' and a sustainability report 'Shaping sustainable living, together', B.I.G. is also publishing a strong ambition for a sustainable future.

Offering sustainable flooring and material solutions will be the number one priority for the coming years.

The Group's first sustainability report is built around a self-designed sustainability model - "Route 2030" - which is based on achievable commitments, covers the main priorities and reflects B.I.G.'s vision in a sincere way.

Their vision for the B.I.G. change is to actively build a better future by their our carbon footprint to zero and doing business in a transparent, integer way. In this sense, it is the translation of the Group's purpose defined in 2021: shaping sustainable living, together.

With an annual report entitled 'Here.We.Go' and a sustainability report 'Shaping sustainable living, together', B.I.G. is also publishing a strong ambition for a sustainable future.

Offering sustainable flooring and material solutions will be the number one priority for the coming years.

The Group's first sustainability report is built around a self-designed sustainability model - "Route 2030" - which is based on achievable commitments, covers the main priorities and reflects B.I.G.'s vision in a sincere way.

Their vision for the B.I.G. change is to actively build a better future by their our carbon footprint to zero and doing business in a transparent, integer way. In this sense, it is the translation of the Group's purpose defined in 2021: shaping sustainable living, together.

Pol Deturck adds “By 2030, together with a broad group of suppliers, stakeholders and partners, we want to be the leader in sustainable flooring and material solutions. Specifically, our future value proposition is based on products and services that are environmentally & climate friendly, circular and offered by talented, innovative people with an emphasis on integrity and respect for values. This results more in a recurring value proposition for the future.”

Clear growth ambitions
As a 100% family-owned international Group with a clear long-term vision, B.I.G. stayed true to their plans and kept on investing in all areas of their business.
“The ambition for 2021 was to invest over 100 mio euro. But we were held back by external, unforeseen factors: from delays on quotes and execution to the lack of availability and resources due to the pandemic. If all goes as planned, we’ll make up for it in 2022 with an investment budget well over 100 million euro. The main areas of interest will be sustainability, innovation and Industry 4.0.” says Pieter-Jan Sonck, CFO of B.I.G.

Adding to the gradual top-line growth of recent years, the Group can look back on an unprecedented financial boom. The driving forces: favorable market conditions, a revitalized growth strategy and a team of nearly 5.000 first-class employees.

B.I.G. reported a turnover of EUR 2,5 billion, an increase of 45 % compared to 2020. The Group ebitda amounted to EUR 451 million, an increase of 120 % compared to 2020 and a net result of EUR 274 million, a growth of 215% compared to 2020.

Fruitful year for all Business Units
It was a fruitful year for all 3 business units, but the Group's business unit Polymers stood out. Exceptionally strong demand in Europe and North America, combined with raw material shortages and unplanned shutdowns of competitors, pushed prices and margins up to highs. The Polymers facilities ran at full capacity to meet the customers’ needs and hit all-time profit records during several months.

The Group's business unit Flooring Solutions also fared well. Most divisions and regions outperformed amid surging energy prices, disrupted supply chains, cost volatility in transport and raw materials, and other challenges. Their sustained focus on innovation, design and product differentiation led to an improved operating result at the end of 2021.

The achievements by Engineered Solutions echo those of the other two business units, from volume increases to budget increases. B.I.G. took big leaps forward in all its key markets, including the automotive sector, geotextiles and filtration.

Source:

Beaulieu International Group / EMG

AkzoNobel acquires African paints and coatings activities from Kansai Paint (c) AkzoNobel
01.06.2022

AkzoNobel acquires African paints and coatings activities from Kansai Paint

AkzoNobel is to further strengthen its African footprint after reaching an agreement with Kansai Paint to acquire its paints and coatings activities in the region. Completion, which is subject to regulatory approvals, is expected during the course of 2023.
 
Present in 12 countries in Africa, Kansai Paint has regional consolidated revenue of around €280 million. The transaction includes the Plascon brand, which has more than 100 years of heritage in South Africa. Together with our own Dulux brand, they’re the longest-established paint brands in the region. The intended acquisition also includes automotive and protective coatings, and coatings for wood and coil.
 
“Acquiring Kansai Paint’s activities in the region will help us to further expand our paints and coatings business in Africa and provide a strong platform for future growth,” says AkzoNobel CEO, Thierry Vanlancker. “Kansai Paint shares our commitment to innovation and sustainability, and we look forward to combining our expertise, which will result in a wider range of innovative products and more sustainable solutions for our customers.”
 

AkzoNobel is to further strengthen its African footprint after reaching an agreement with Kansai Paint to acquire its paints and coatings activities in the region. Completion, which is subject to regulatory approvals, is expected during the course of 2023.
 
Present in 12 countries in Africa, Kansai Paint has regional consolidated revenue of around €280 million. The transaction includes the Plascon brand, which has more than 100 years of heritage in South Africa. Together with our own Dulux brand, they’re the longest-established paint brands in the region. The intended acquisition also includes automotive and protective coatings, and coatings for wood and coil.
 
“Acquiring Kansai Paint’s activities in the region will help us to further expand our paints and coatings business in Africa and provide a strong platform for future growth,” says AkzoNobel CEO, Thierry Vanlancker. “Kansai Paint shares our commitment to innovation and sustainability, and we look forward to combining our expertise, which will result in a wider range of innovative products and more sustainable solutions for our customers.”
 
Adds Kunishi Mori, Kansai Paint’s president: “We are convinced that AkzoNobel is the best owner as AkzoNobel considers the decorative paints business as a core business and will therefore be able to unlock the full potential of the business, thereby contributing to the development of the African economy.
 
”For Prejay Lalla and Arvind Shekhawat, Chief Executive Officers of KPAL and KPEA (the respective Africa entities being sold by Kansai Paint in this transaction), this agreement is an opportunity to further enhance growth. “We believe that AkzoNobel will be the owner who will elevate the business to the next level as AkzoNobel is willing to invest in ESG, is committed to innovation, workforce development and broader career opportunities as well as the long-term success of its paint businesses in Africa.”
 
The intended acquisition follows on from a series of recent acquisitions by AkzoNobel across paints and coatings over the last two years, including Titan Paints in Spain and Portugal, New Nautical Coatings in the US and, most recently, Grupo Orbis in Latin America.

More information:
AkzoNobel Coatings Automotive
Source:

AkzoNobel

31.05.2022

TOS+H EXPO 2022 concludes 4th edition of trade fair in Turkey

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

“The remarkable outcome of TOS+H EXPO 2022 is clearly asserting its significance as the leading trade fair for the industry, in Turkey,” says Petra Cullmann, Executive Director at Messe Düsseldorf. “Our new partner, the Istanbul Chamber of Industries, paved the way for a high-caliber symposium with inspiring insights and intensive discussions, and our exhibitors again proved their expertise with a comprehensive overview of innovative products, equipment and services at the trade fair. We are proud to be sending clear signals in the market. We're giving a lead, both in Turkey and beyond, on the element that matters most: the individual.”

TOS+H Expo 2022 and the Occupational Health and Safety Symposium organized by the Istanbul Chamber of Industry were officially opened on May 14, 2022 by Ms. Petra Cullman, Executive Director Messe Düsseldorf and Sadık Ayhan SARUHAN, ICI Vice President. The new partnership with the Chamber of Industry will ensure the quality of the event and also strengthen the leading position of TOS+H Expo in Turkey.

“The Occupational Health and Safety Symposium, which we organized simultaneously with the 4th TOS+H Expo - Turkish Occupational Safety + Health Exhibition, was concluded with the presentations of 84 speakers in 22 sessions. Our symposium included highly interesting presentations on the environment, sustainability and labor law and was met with great interest by all parties and especially by representatives from all industrial sectors which deal with the topic of occupational safety and health at work. As ICI, we will continue to work to improve OHS processes in the next period”, said a spokesperson for the Istanbul Chamber of Industry.

Source:

Messe Düsseldorf GmbH