From the Sector

Reset
13 results
28.09.2023

EcoVadis Gold Rating für DOMO Chemicals

DOMO Chemicals, ein führender Hersteller technischer Materialien, bestätigt sein Engagement für Nachhaltigkeit mit dem Erhalt des EcoVadis Gold Ratings. Verbessert um 13 Punkte im Vergleich zum Vorjahr gehört DOMO zu den besten 5% aller von EcoVadis bewerteten Unternehmen. EcoVadis ist eine führende Plattform für die Nachhaltigkeitsbewertung von Unternehmen mit mehr als 100.000 Mitgliedsunternehmen.

Yves Bonte, CEO von DOMO Chemicals: " Innerhalb eines Jahres ist es uns gelungen, von den Top 25% in die Top 5% aufzusteigen, was DOMO zu einem der besten Unternehmen der Branche macht. Dies zeigt unser Engagement für unser ehrgeiziges Ziel, bis 2030 der Maßstab für Nachhaltigkeit in der Branche zu werden."

DOMO Chemicals, ein führender Hersteller technischer Materialien, bestätigt sein Engagement für Nachhaltigkeit mit dem Erhalt des EcoVadis Gold Ratings. Verbessert um 13 Punkte im Vergleich zum Vorjahr gehört DOMO zu den besten 5% aller von EcoVadis bewerteten Unternehmen. EcoVadis ist eine führende Plattform für die Nachhaltigkeitsbewertung von Unternehmen mit mehr als 100.000 Mitgliedsunternehmen.

Yves Bonte, CEO von DOMO Chemicals: " Innerhalb eines Jahres ist es uns gelungen, von den Top 25% in die Top 5% aufzusteigen, was DOMO zu einem der besten Unternehmen der Branche macht. Dies zeigt unser Engagement für unser ehrgeiziges Ziel, bis 2030 der Maßstab für Nachhaltigkeit in der Branche zu werden."

More information:
DOMO Chemicals EcoVadis
Source:

DOMO Chemicals

23.06.2023

DOMO Chemicals publishes sustainability report

DOMO Chemicals, a global leader in polyamide-based engineered material solutions and services, has published its latest annual Sustainability Report, detailing progress on its sustainability journey, including notable reductions in greenhouse gas emissions. DOMO’s mission is to engineer polyamide solutions that contribute to a better, more sustainable world. In publishing its second annual Sustainability Report, DOMO enters a new phase in its decarbonization quest, with confidence in its long-term aspiration to set the standard for sustainability in the industry by 2030.

Notably, the Sustainability Report details DOMO’s achievements in 2022 toward realizing its 2030 sustainability goals. In terms of decarbonization and broader environmental achievements, against a 2019 baseline, the company:

DOMO Chemicals, a global leader in polyamide-based engineered material solutions and services, has published its latest annual Sustainability Report, detailing progress on its sustainability journey, including notable reductions in greenhouse gas emissions. DOMO’s mission is to engineer polyamide solutions that contribute to a better, more sustainable world. In publishing its second annual Sustainability Report, DOMO enters a new phase in its decarbonization quest, with confidence in its long-term aspiration to set the standard for sustainability in the industry by 2030.

Notably, the Sustainability Report details DOMO’s achievements in 2022 toward realizing its 2030 sustainability goals. In terms of decarbonization and broader environmental achievements, against a 2019 baseline, the company:

  • Reduced scope 1 and 2 greenhouse gas emissions by 27%, making significant progress toward its target of 40% reduction by 2030 and carbon neutrality by 2050
  • Increased renewable electricity throughout operations to 12%
  • Reduced waste by 24%
  • Lowered water intake by 4.5%

In addition, as a provider of polyamide-based sustainable and circular solutions, DOMO:

  • Achieved more than 11% of engineered materials sales based on sustainable feedstock, making excellent progress toward its 2030 target of 20%
  • Allocated 25% of research and development resources to enhanced recycling

Moreover, fostering talent and ensuring the well-being of its workforce as a responsible employer is essential for sustainable growth, and 2022 highlights include:

  • Increased share of women in senior positions from 22% in 2021 to 30% in 2022
  • Providing a safe and inclusive working environment that encourages personal and professional development as well as a global safety culture
Source:

DOMO Chemicals

06.07.2022

DOMO Chemicals und Hynamics: Production of polyamides from low-carbon hydrogen

DOMO Chemicals, a producer of engineered polyamide materials, and Hynamics, a 100% subsidiary of EDF Group specializing in the production of low-carbon hydrogen, have entered into a partnership project with the objective of achieving zero-carbon for 100% of the hydrogen used at the Belle-Étoile industrial site, in Saint-Fons (south of Lyon, France), in the heart of the French Vallée de la Chimie (“Chemistry Valley”).

For the first time in France, the “HyDom” project will enable the installation of an 85-megawatt (MW) hydrogen production plant using the water electrolysis process at the Belle-Étoile site, with a production capacity of 11,000 metric tons of low-carbon hydrogen per year. The plant will be powered by the French low-carbon electric power mix. By 2027, it will supply 100% of the annual production of hexamethylene diamine, a key component used in the production of plastics.

DOMO Chemicals, a producer of engineered polyamide materials, and Hynamics, a 100% subsidiary of EDF Group specializing in the production of low-carbon hydrogen, have entered into a partnership project with the objective of achieving zero-carbon for 100% of the hydrogen used at the Belle-Étoile industrial site, in Saint-Fons (south of Lyon, France), in the heart of the French Vallée de la Chimie (“Chemistry Valley”).

For the first time in France, the “HyDom” project will enable the installation of an 85-megawatt (MW) hydrogen production plant using the water electrolysis process at the Belle-Étoile site, with a production capacity of 11,000 metric tons of low-carbon hydrogen per year. The plant will be powered by the French low-carbon electric power mix. By 2027, it will supply 100% of the annual production of hexamethylene diamine, a key component used in the production of plastics.

The project will eventually prevent the emission of 84 kilotons of carbon dioxide (CO2) each year. Hexamethylene diamine, and ultimately, durable and low-carbon polyamides, will be used in various applications in major industry sectors, such as automotive, electronics, and heating & cooling.
This project is a major step towards the decarbonization of industrial sites that use grey hydrogen (produced from fossil fuels). The location in the Vallée de la Chimie within the vicinity of major transport routes opens up opportunities for the creation of a more complete hydrogen ecosystem.

The first phase of the project will consist of building up and ascertaining technical concepts and integrating the low-carbon hydrogen production plant within the larger production process of hexamethylene diamine.

Considering the high-power scale of the future electrolytic hydrogen production facility, the HyDom project is being developed in close collaboration with RTE (an organization in charge of managing the French power grid), to solve connection issues. As a priority project for the industry's zero-carbon strategy and for the “France 2030” investment plan, HyDom is supported by the French government and has been presented to the European Commission for public funding.

Source:

DOMO Chemicals / Marketing Solutions NV

19.05.2022

DOMO Chemicals stellt seine neue Marke NYLEO® vor

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

DOMOs NYLEO® setzt auf unsere Erfahrungen mit Nylon 66-basierten Fasern und legt mit drei Produkten den Schwerpunkt auf Innovation: NYLEO® PROTECT mit verbessertem Flammschutz, NYLEO® 4EARTH® mit verbesserter biologischer Abbaubarkeit und NYLEO® SAFE mit bakteriostatischen Eigenschaften.

DOMOs Erbe an innovativen Nylon 66-Fasern
DOMOs Team für Hochleistungsfasern hat seinen Sitz im französischen Valence. DOMO produziert seit 1955 PA66-Fasern für Anwendungsbereiche wie Schleifmittelvliese, Luftfahrt, Teppichböden, Hochleistungstextilien, Flock für Polstermöbel, Innenausstattung und -böden von Autos sowie viele weitere Verbraucherprodukte. Die NYLEO® Marke wird nun auf das gesamte Portfolio an Polyamid 66 (PA 66)-Faserprodukten, einschließlich gekräuseltem TOW oder TOW für die Flockherstellung, angewendet. Fasern auf Basis von PA66 sind für hohe Widerstandsfähigkeit, hervorragende Verschleiß- und Abriebfestigkeit, hohe Zähigkeit, ausgezeichnete Färbbarkeit und Farbechtheit sowie einheitliche Qualität und weiche Haptik bekannt. Dazu gehören:

  • NYLEO® PROTECT – um das Sicherheitsniveau in den Bereichen persönliche Schutzausrüstung, Bekleidung, Möbel und Transport zu erhöhen, hat DOMO eine neue flammhemmende PA 66-Faser entwickelt. NYLEO® PROTECT vereint alle Vorteile von PA 66, wie z. B. mechanische Eigenschaften, Komfort, geringes spezifisches Gewicht und hervorragende Abriebfestigkeit, mit verbessertem Flammschutz. Der Sauerstoffindex (LOI) von NYLEO® PROTECT wurde auf 28 % verbessert, was dem Niveau typischer flammhemmender Fasern entspricht.
  • NYLEO® 4EARTH® – immer mehr Hersteller befassen sich mit den Themen Nachhaltigkeit und Kreislaufwirtschaft und versuchen ihren Einfluss auf die Umwelt weitmöglichst zu verringern, z. B. durch ein besseres Abfallmanagement. Die textile Wertschöpfungskette hat starken Anteil an den Mülldeponien, auf denen die meisten Kleidungsstücke enden. Aus diesem Grund entwickelte DOMO mit NYLEO® 4EARTH® eine Faser, die auf Deponien besser biologisch abgebaut wird. Während traditionelle Nylon 66-Fasern 50 – 100 Jahre für den Zerfall benötigten, braucht NYLEO® 4EARTH aufgrund seiner verbesserten biologischen Abbaubarkeit nur fünf Jahre, um abgebaut zu werde.
  • NYLEO® SAFE – die Verbreitung von Bakterien hat sich zu einem immer dringlicheren Gesundheitsproblem entwickelt. Bei NYLEO® SAFE wird ein bakteriostatisches Mittel in die Polymermatrix eingebracht, wo es die Fasern langfristig schützt und das Wachstum von Bakterien verhindert.
Source:

DOMO Chemicals / Marketing Solutions NV

(c) DOMO Chemicals
12.05.2022

DOMO stellt neue Materialdatenbank für Spritzgusssimulationen vor

  • DOMOs neuer Service deckt das globale Produktportfolio von Werkstoffen für den Spritzguss ab.
  • DOMO Engineered Materials ermöglicht den direkten Zugriff auf die stets aktuelle Materialdatenbank für Spritzgusssimulationen, sodass Kunden jederzeit die aktuellsten, umfangreichsten und validierten TECHNYL®-Werkstoffdaten einsehen können.
  • Dieser neue Service für schnellere Projektentwicklungszeiten wird am 12. Mai 2022 freigeschaltet.

Bisher mussten Anwender, die die neuesten Datenbanken für Spritzgussanwendungen von den jeweiligen Anbietern erhalten wollten, auf ein Update der Simulationssoftware warten. Von der Verfügbarkeit neuer Materialien bis zur Aktualisierung der öffentlichen Datenbanken verging beträchtliche Zeit – mitunter mehr als ein Jahr. Darüber hinaus mussten sich Anwender regelmäßig an verschiedene Kontakte wenden, um von Materialanbietern Auskünfte über die neuesten verfügbaren Ressourcen einzuholen.

  • DOMOs neuer Service deckt das globale Produktportfolio von Werkstoffen für den Spritzguss ab.
  • DOMO Engineered Materials ermöglicht den direkten Zugriff auf die stets aktuelle Materialdatenbank für Spritzgusssimulationen, sodass Kunden jederzeit die aktuellsten, umfangreichsten und validierten TECHNYL®-Werkstoffdaten einsehen können.
  • Dieser neue Service für schnellere Projektentwicklungszeiten wird am 12. Mai 2022 freigeschaltet.

Bisher mussten Anwender, die die neuesten Datenbanken für Spritzgussanwendungen von den jeweiligen Anbietern erhalten wollten, auf ein Update der Simulationssoftware warten. Von der Verfügbarkeit neuer Materialien bis zur Aktualisierung der öffentlichen Datenbanken verging beträchtliche Zeit – mitunter mehr als ein Jahr. Darüber hinaus mussten sich Anwender regelmäßig an verschiedene Kontakte wenden, um von Materialanbietern Auskünfte über die neuesten verfügbaren Ressourcen einzuholen.

DOMO ermöglicht es seinen Kunden jetzt mit regelmäßigen Aktualisierungen der Datenbank für Autodesk Moldflow einen wertvollen neuen Service zu erhalten. Auf Anfrage werden auch Spritzgussmaterialdaten für andere Softwarelösungen (Moldex3D, CADmould usw.) von unserem Sales und Technical Manager zur Verfügung gestellt.

Da Kunden so stets die neuesten Materialdaten für Spritzgusssimulationen zur Hand haben, können sie Zeit und Mühe bei der Generierung der notwendigen Daten für ihre Projekte sparen. Diese validierten Messdaten für präzisere Simulationen ermöglicht den Kunden, ihre Entwicklungszeiten zu verkürzen und Produkte schneller auf den Markt zu bringen.

Darüber hinaus umfassen diese direkten Aktualisierungen auch neue Werkstoffe aus DOMOs Entwicklungspipeline sowie neue validierte Daten, die über die gewöhnliche Vorgehensweise von Spritzgussanwendungen hinausgehen und beispielsweise die Optimierung der Vorhersage von Faserausrichtungen erlauben.

More information:
Domo DOMO Chemicals Kunststoffe
Source:

DOMO Chemicals / Marketing Solutions NV

03.05.2022

DOMO: Mechanische Struktursimulation für PA6-GF-Werkstoffe

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

Die neuen MMI-PA6-GF Materialkarten können für eine Vielzahl von Glasfaserkonzentrationen und -temperaturen sowie für elastische und elastoplastische Materialmodelle mit Versagensindikatoren eingesetzt werden. Diese sind in der Digimat Software verfügbar und führen zu den gleichen präzisen Ergebnissen wie bei den TECHNYL® A PA66-Werkstoffen. Die neuen Materialkarten heben somit die PA6-Datenbank auf das gleiche Leistungsniveau wie PA66 an. Im nächsten Schritt werden in die Digimat-Datenbank auch crashspezifische und thermische Modelle eingepflegt.

„Dank der präzisen MMI-Simulation können TECHNYL® Bauteile entwickelt werden, die leichter, leistungsfähiger und kosteneffizienter sind“, erklärt Gilles Robert, Material Expert bei DOMO. „Unsere Kunden profitieren von kürzeren Entwicklungszeiten und haben eine bessere Kontrolle über die internen Kosten. Der kontinuierliche Aufbau der TECHNYL®-Materialdatenbank erweitert das Anwendungsfeld dieser Simulationsumgebung auf PA6 Bauteile.“

Source:

DOMO Chemicals / Marketing Solutions NV

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

Foto: Dr. Wolfgang Kubak / DOMO Chemicals
24.03.2022

DOMO produziert fünfmillionste Tonne Caprolactam

  • Führender Hersteller von Polyamid-Lösungen verkündet Meilenstein in der Caprolactam-Produktion
  • Seit 1942 5 Mio. Tonnen Caprolactam weltweit ausgeliefert
  • Vollständige Integration am Standort Leuna sichert die Versorgung mit chemischen Zwischenprodukten, Caprolactam und Polyamid 6

DOMO Chemicals, ein führender Hersteller von Polyamid-Lösungen, verkündet zu Wochenbeginn die erfolgreiche Lieferung von 5 Millionen Tonnen Caprolactam am Standort Leuna. Seit 1942 produziert der Standort in den Anlagen hochwertiges Caprolactam. Diese Menge entspricht ca. 225.000 Lkw-Ladungen. Seit 1994 produziert das deutsche Tochterunternehmen DOMO Caproleuna GmbH am Standort im Herzen Europas Caprolactam und Polyamid. In diesem Zeitraum wurden die Produktionskapazitäten schrittweise auf aktuell 176.000 Jahrestonnen erweitert.

  • Führender Hersteller von Polyamid-Lösungen verkündet Meilenstein in der Caprolactam-Produktion
  • Seit 1942 5 Mio. Tonnen Caprolactam weltweit ausgeliefert
  • Vollständige Integration am Standort Leuna sichert die Versorgung mit chemischen Zwischenprodukten, Caprolactam und Polyamid 6

DOMO Chemicals, ein führender Hersteller von Polyamid-Lösungen, verkündet zu Wochenbeginn die erfolgreiche Lieferung von 5 Millionen Tonnen Caprolactam am Standort Leuna. Seit 1942 produziert der Standort in den Anlagen hochwertiges Caprolactam. Diese Menge entspricht ca. 225.000 Lkw-Ladungen. Seit 1994 produziert das deutsche Tochterunternehmen DOMO Caproleuna GmbH am Standort im Herzen Europas Caprolactam und Polyamid. In diesem Zeitraum wurden die Produktionskapazitäten schrittweise auf aktuell 176.000 Jahrestonnen erweitert.

Die Caprolactamherstellung hat am Standort Leuna eine 80-jährige Tradition. Bereits 1942 ging in Leuna die weltweit erste großtechnische Anlage zur Produktion von Caprolactam in Betrieb. Seitdem die DOMO Gruppe im Jahr 1994 die Caprolactamanlagen übernommen hat, wurde die Technologie und das Verfahren kontinuierlich weiterentwickelt. In den letzten 20 Jahren konnte DOMO Caproleuna die spezifischen Energieverbräuche im Mitteldruckdampf um 30 % sowie im Niederdruckdampf um 40 % absenken und so den Herstellungsprozesses stetig weiter optimieren. Nachhaltigkeit stellt eine wichtige strategische Säulen des Konzerns dar. DOMO Beyond ist unser Fahrplan für innovative Projekte, mit denen wir unsere Nachhaltigkeitsziele in den Bereichen Planet Care, verantwortungsvoller Arbeitgeber und Partner of Choice erreichen wollen. Deshalb hat sich DOMO dazu verpflichtet, bis 2030 einen Nullanstieg der CO2-Emissionen gegenüber 2019, eine Reduzierung der Kohlenstoffanteile im Energiemix von DOMO um 15 % sowie eine Reduzierung der Industrieabfälle um 7 % anzustreben.

„Über die letzten 3 Jahrzehnte haben wir den Caprolactam-Anlagenkomplex stets weiter ausgebaut und die Produktionsmengen umfangreich gesteigert. Der heutige Fokus liegt klar bei der Effizienzsteigerung und Energieeinsparung“, so Dr. Thomas Jende, Produktionsleiter für Caprolactam.

Das wichtigste Vorprodukt für Polyamid 6
Caprolactam wird vor allem zur Herstellung von Polyamid 6 benötigt und in der eigenen, am Standort integrierten Polymerisation unter dem Markennamen DOMAMID® und TECHNYL® weiterverarbeitet. DOMAMID® kommt als Basispolymer vorrangig für Engineering Plastics-, Textil- und für Folienanwendungen zum Einsatz. „Der Erfolg ist eine Teamleistung: Das Produktionsjubiläum ist nur möglich, da auch in den vor- und nachgelagerten Verfahrensstufen der Wertschöpfungskette zum Caprolactam die entsprechenden Produktionsmengen erreicht wurden,“ sagt Luc de Raedt, Site Director Leuna. Insgesamt beschäftigt DOMO am Standort Leuna rund 620 Mitarbeiter.

More information:
DOMO Chemicals Caprolactam
Source:

DOMO Chemicals

Domo logo (c) Domo
Domo logo
14.03.2020

DOMO Chemicals to invest €12 million in new nylon plant in China

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

DOMO Chemicals will invest €12 million in the new plant, which will have more than 11,500 m 2-floor space. The company plans to install multiple production lines at the first stage of development, which would offer an estimated capacity of 25,000 tons/year. There will be enough additional space available to cope with future demand requirements. The move is in line with the company’s global growth strategy with a strong focus on the Asia Pacific (APAC) region.

Source:

Domo 

DOMO Chemicals
DOMO Chemicals
31.01.2020

DOMO Chemicals übernimmt das europäische Geschäft von Solvay

DOMO Chemicals, ein führender Hersteller von hochwertigen Werkstoffen für eine Vielzahl von Märkten, hat heute bekannt gegeben, dass das Unternehmen die Übernahme des europäischen Geschäfts mit Hochleistungs-Polyamiden von Solvay abgeschlossen hat.

Dieses Geschäft beinhaltet die Betriebe der technischen Kunststoffe in Frankreich und Polen, den Betrieb der Hochleistungsfasern in Frankreich und den Betrieb der Polymere und Zwischenprodukte in Frankreich, Spanien und Polen. Dazu gehören die Produktion, der Vertrieb, der technische Support, die Forschung und Entwicklung sowie die Innovationsdienstleistungen in Frankreich, Spanien, Polen, Deutschland und Italien, die zusammen etwa 1.100 Mitarbeiter beschäftigen. Die Vereinbarung schließt auch ein Joint-Venture zwischen BASF und DOMO in Frankreich für die Produktion von Adipinsäure ein.

DOMO Chemicals, ein führender Hersteller von hochwertigen Werkstoffen für eine Vielzahl von Märkten, hat heute bekannt gegeben, dass das Unternehmen die Übernahme des europäischen Geschäfts mit Hochleistungs-Polyamiden von Solvay abgeschlossen hat.

Dieses Geschäft beinhaltet die Betriebe der technischen Kunststoffe in Frankreich und Polen, den Betrieb der Hochleistungsfasern in Frankreich und den Betrieb der Polymere und Zwischenprodukte in Frankreich, Spanien und Polen. Dazu gehören die Produktion, der Vertrieb, der technische Support, die Forschung und Entwicklung sowie die Innovationsdienstleistungen in Frankreich, Spanien, Polen, Deutschland und Italien, die zusammen etwa 1.100 Mitarbeiter beschäftigen. Die Vereinbarung schließt auch ein Joint-Venture zwischen BASF und DOMO in Frankreich für die Produktion von Adipinsäure ein.

Yves Bonte, CEO von DOMO Chemicals, sagt: „Diese Übernahme ist ein wichtiger Meilenstein auf unserem Weg, den Geschäftszweig der auf Nylon basierenden Werkstoffe von DOMO Chemicals zu stärken. Es ist ein wichtiger Schritt zur Erfüllung unserer nachhaltigen Wachstumsstrategie, indem die einzigartige Technologie und die Entwicklungs- und Designfähigkeiten unserer vereinten Teams kombiniert und genutzt werden, um ein wichtiger globaler Dienstleister für unsere Kunden auf den Schlüsselmärkten Transport, Elektro- und Elektronik sowie Konsumgüter zu werden.“

Bonte fügt hinzu: „Als letzten Schritt in der Übernahme beginnen wir nun mit der Erschließung und Integration der sich einander ergänzenden Stärken der verschiedenen Teams und Talente. Unser primärer Fokus liegt weiterhin auf der Erfüllung der Bedürfnisse unserer Kunden und der Einhaltung ihrer Anforderungen, wobei wir ein einzigartiger Anbieter von Lösungen mit integriertem Nylon (6 und 6-6) werden.“

„Neue und bestehende Kunden von DOMO Chemicals und dem übernommenen Geschäftszweig erhalten nun Zugang zu noch höherer Qualität und noch innovativeren und nachhaltigeren Lösungen für die Entwicklung ihrer Prozesse, Produkte und Anwendungen in einer dauerhaft dynamischen Marktumgebung“, fasst Bonte zusammen.

More information:
DOMO Chemicals
Source:

Marketing Solutions NV

DOMO Chemicals appoints Yves Bonte as CEO (c) DOMO Chemicals
DOMO Chemicals appoints Yves Bonte as CEO
21.01.2020

DOMO Chemicals appoints Yves Bonte as CEO

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

Gregory De Clerck, Managing Director of Domo Investment Group and Member of the Board of DOMO Chemicals commented, “I would personally like to thank Alex for his leadership in the successful growth and transformation of DOMO from an upstream nylon 6 specialist into a full integrated engineering materials company developing innovative and sustainable solutions in the Polyamide Industry. We are excited to welcome Yves Bonte to DOMO as the new CEO and Chairman of DOMO Chemicals. We believe he is the ideal person to lead the next chapter of the Company’s growth and transformation process. Alex will continue to significantly contribute to the success of new DOMO.”

Yves Bonte joins DOMO from Yara, the leading fertilizer company and a provider of environmental solutions where he held the role of Executive Vice President Industrial recently named New Business since January 2010, and was responsible for a business generating appr. 20% of Yara’s total revenue of 12.9 billion USD. Prior to Yara, he held a variety of business leadership, commercial and operations roles at Lyondell Basel and Exxon Chemicals. Since 2018 Yves is as Board Member of DOMO.

“I have a true passion for innovation and sustainability, and I am thrilled to join DOMO as its next CEO,” Yves Bonte commented. “The Company has established itself as a leader in sustainable polyamide based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe DOMO is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The recently announced long-term strategy and planned investment will position DOMO to reach new levels of growth and success.”

More information:
DOMO Chemicals
Source:

Marketing Solutions NV

DOMO Chemicals (c) DOMO Chemicals
15.08.2019

DOMO Chemicals erwirbt europäisches Performance-Polyamid-Geschäft

Die Vereinbarung umfasst die Bereiche Technische Kunststoffe in Frankreich und Polen, Hochleistungsfasern in Frankreich, Polymer- und Zwischenprodukte in Frankreich, Spanien und Polen.

  • Die Übernahme wird das nachgelagerte nylonbasierte Geschäft mit technischen Werkstoffen von DOMO Chemicals deutlich stärken und einen europäischen Marktführer von Format hervorbringen.
  • Die starke Reputation der Marke Technyl® wird das Polyamid-Portfolio von DOMO perfekt ergänzen.

DOMO Chemicals und Solvay haben heute eine Vereinbarung zur Übernahme des europäischen Performance-Polyamid-Geschäfts von Solvay unterzeichnet. Die Vereinbarung umfasst die Bereiche Engineering Plastics in Frankreich und Polen, High Performance Fibers in Frankreich, Polymer- und Zwischenprodukte in Frankreich, Spanien und Polen. Die Vereinbarung beinhaltet auch ein Joint Venture zwischen BASF und DOMO in Frankreich zur Herstellung von Adipinsäure.

Die Vereinbarung umfasst die Bereiche Technische Kunststoffe in Frankreich und Polen, Hochleistungsfasern in Frankreich, Polymer- und Zwischenprodukte in Frankreich, Spanien und Polen.

  • Die Übernahme wird das nachgelagerte nylonbasierte Geschäft mit technischen Werkstoffen von DOMO Chemicals deutlich stärken und einen europäischen Marktführer von Format hervorbringen.
  • Die starke Reputation der Marke Technyl® wird das Polyamid-Portfolio von DOMO perfekt ergänzen.

DOMO Chemicals und Solvay haben heute eine Vereinbarung zur Übernahme des europäischen Performance-Polyamid-Geschäfts von Solvay unterzeichnet. Die Vereinbarung umfasst die Bereiche Engineering Plastics in Frankreich und Polen, High Performance Fibers in Frankreich, Polymer- und Zwischenprodukte in Frankreich, Spanien und Polen. Die Vereinbarung beinhaltet auch ein Joint Venture zwischen BASF und DOMO in Frankreich zur Herstellung von Adipinsäure.

More information:
DOMO Chemicals
Source:

DOMO Chemicals GmbH

06.03.2019

DOMO Chemicals at the Wood Mackenzie European Nylon Conference

DOMO Chemicals, a global leader in the field of material engineering will discuss economic and environmental challenges at the 2019 Wood Mackenzie European Nylon Conference in Frankfurt am Main, Germany from March 5 to 7.

Ron Bult, Director of Global Sales of DOMO Engineering Plas-tics will highlight solutions based on ECONAMID®, a family of PA6 & PA66 compounds based on sustainable post-industrial feedstock derived either from film manufactur-ing or from fiber and yarn manufacturing. Depending on the applications and the desired level of physical and mechanical properties, DOMO can provide grades that are unfilled, mineral filled, glass-fiber filled, or carbon-fiber filled.

“DOMO is making major efforts to accelerate the development of sustainable solu-tions that bring value to our customers’ businesses, while acting responsibly towards the environment, employees and communities,” says Bult.

DOMO Chemicals, a global leader in the field of material engineering will discuss economic and environmental challenges at the 2019 Wood Mackenzie European Nylon Conference in Frankfurt am Main, Germany from March 5 to 7.

Ron Bult, Director of Global Sales of DOMO Engineering Plas-tics will highlight solutions based on ECONAMID®, a family of PA6 & PA66 compounds based on sustainable post-industrial feedstock derived either from film manufactur-ing or from fiber and yarn manufacturing. Depending on the applications and the desired level of physical and mechanical properties, DOMO can provide grades that are unfilled, mineral filled, glass-fiber filled, or carbon-fiber filled.

“DOMO is making major efforts to accelerate the development of sustainable solu-tions that bring value to our customers’ businesses, while acting responsibly towards the environment, employees and communities,” says Bult.

Also at the conference, Philippe Guerineau, VP Sales & Marketing in the company’s Nylon & Intermediates business unit, will join a panel discussion at the conference to discuss on the economic outlook and the future of the polyamide industry. DOMO will be holding consultations and exclusive events for its customers as well.

More information:
nylon
Source:

DOMO Chemicals