From the Sector

Reset
2095 results
© Tie Solution
14.10.2021

Tie Solution spendet Winterschals an das DRK

  • Hersteller von Accessoires im B2B-Bereich übergibt Winterschals an den DRK-Kreisverband Marburg-Gießen e.V.

Vor Winterbeginn spendet die Tie Solution GmbH - Hersteller von Accessoires im B2B-Bereich - aus Wetzlar dem DRK-Kreisverband Marburg-Gießen e.V. hochwertige Winterschals und Accessoires im Wert von ca. 15.000 Euro. Diese werden in den DRK-Kleiderläden verkauft und kommen so auch bedürftigen Menschen in der Region zugute. Darüber hinaus fließt der Erlös in die soziale Arbeit des Kreisverbandes.

„Natürlich haben auch wir das Ausmaß der Corona-Pandemie und die finanziellen Folgen bei einem Teil der Bevölkerung mitbekommen und wollten Betroffenen helfen“, so Antonio G. Sanchez, Geschäftsführer von Tie Solution. „Deshalb haben wir uns für eine Spende an den DRK-Kreisverband entschieden.“.

Am 1. Dezember eröffnet der DRK-Kreisverband in der Wetzlarer Straße 1 in Stadtallendorf seinen fünften Kleiderladen. Dort sind die Spenden wie in den bereits bestehenden Läden in Gießen in der Rodheimer Straße und im Wiesecker Weg, in Marburg in der Neustadt und in Lollar im Auweg erhältlich.

  • Hersteller von Accessoires im B2B-Bereich übergibt Winterschals an den DRK-Kreisverband Marburg-Gießen e.V.

Vor Winterbeginn spendet die Tie Solution GmbH - Hersteller von Accessoires im B2B-Bereich - aus Wetzlar dem DRK-Kreisverband Marburg-Gießen e.V. hochwertige Winterschals und Accessoires im Wert von ca. 15.000 Euro. Diese werden in den DRK-Kleiderläden verkauft und kommen so auch bedürftigen Menschen in der Region zugute. Darüber hinaus fließt der Erlös in die soziale Arbeit des Kreisverbandes.

„Natürlich haben auch wir das Ausmaß der Corona-Pandemie und die finanziellen Folgen bei einem Teil der Bevölkerung mitbekommen und wollten Betroffenen helfen“, so Antonio G. Sanchez, Geschäftsführer von Tie Solution. „Deshalb haben wir uns für eine Spende an den DRK-Kreisverband entschieden.“.

Am 1. Dezember eröffnet der DRK-Kreisverband in der Wetzlarer Straße 1 in Stadtallendorf seinen fünften Kleiderladen. Dort sind die Spenden wie in den bereits bestehenden Läden in Gießen in der Rodheimer Straße und im Wiesecker Weg, in Marburg in der Neustadt und in Lollar im Auweg erhältlich.

More information:
Tie Solution
Source:

Tie Solution GmbH

14.10.2021

adidas launches new share buyback

Through its new strategy ‘Own the Game’ adidas expects to generate substantial cumulative free cash flow until 2025. The company plans to share the majority of it – between € 8 and € 9 billion – with its shareholders through dividend pay-outs as well as through share buybacks. In this context, adidas had launched a share buyback program in July which was completed successfully at the end of September. Between July 1 and September 30, 2021, the company bought back 1,851,522 shares for a total amount of € 550 million.

Against this background, the Executive Board, with approval of the Supervisory Board, has decided to launch an additional share buyback program. Starting on October 18, 2021, the company plans to buy back shares worth € 450 million until the end of the year. Taking into consideration the share buyback completed at the end of September, adidas will buy back shares in a total amount of € 1 billion in 2021. Including the dividend payment of € 585 million in May, the company will return nearly € 1.6 billion to its shareholders this year.

Through its new strategy ‘Own the Game’ adidas expects to generate substantial cumulative free cash flow until 2025. The company plans to share the majority of it – between € 8 and € 9 billion – with its shareholders through dividend pay-outs as well as through share buybacks. In this context, adidas had launched a share buyback program in July which was completed successfully at the end of September. Between July 1 and September 30, 2021, the company bought back 1,851,522 shares for a total amount of € 550 million.

Against this background, the Executive Board, with approval of the Supervisory Board, has decided to launch an additional share buyback program. Starting on October 18, 2021, the company plans to buy back shares worth € 450 million until the end of the year. Taking into consideration the share buyback completed at the end of September, adidas will buy back shares in a total amount of € 1 billion in 2021. Including the dividend payment of € 585 million in May, the company will return nearly € 1.6 billion to its shareholders this year.

“The decision to launch an additional share buyback program reflects our strong financial profile as well as the successful start of the execution of our strategy ‘Own the Game’,” said Harm Ohlmeyer, CFO of adidas. “Regular share buybacks and dividends in the amount of between € 8 and € 9 billion are a key component of ‘Own the Game’. They will be complemented by returning the majority of the cash proceeds from the Reebok divestiture to our shareholders after closing of the transaction.”  

adidas intends to cancel most of the repurchased shares, which would reduce the number of shares and the share capital accordingly.

More information:
adidas
Source:

adidas AG

14.10.2021

Gold status for Kelheim Fibres in EcoVadis CSR rating

The German speciality viscose fibre manufacturer Kelheim Fibres was awarded gold in the CSR rating by EcoVadis, scoring among the top 3% of all companies evaluated. The rating was well above average in all four individual areas (environment, labour and human rights, ethics, sustainable procurement), but Kelheim Fibres achieved absolute top scores in the environment area in particular.

In addition to the excellent EcoVadis rating, Kelheim Fibres is also the first viscose fibre producer worldwide with a certified EMAS environmental management system and ranked highly in the Canadian NGO Canopy's "Hot Button Report" for sustainable wood and pulp sourcing.

Since its founding in 2007, EcoVadis has grown to become the world’s largest and most trusted provider of business sustainability ratings, creating a global network of more than 75,000 rated companies.

The German speciality viscose fibre manufacturer Kelheim Fibres was awarded gold in the CSR rating by EcoVadis, scoring among the top 3% of all companies evaluated. The rating was well above average in all four individual areas (environment, labour and human rights, ethics, sustainable procurement), but Kelheim Fibres achieved absolute top scores in the environment area in particular.

In addition to the excellent EcoVadis rating, Kelheim Fibres is also the first viscose fibre producer worldwide with a certified EMAS environmental management system and ranked highly in the Canadian NGO Canopy's "Hot Button Report" for sustainable wood and pulp sourcing.

Since its founding in 2007, EcoVadis has grown to become the world’s largest and most trusted provider of business sustainability ratings, creating a global network of more than 75,000 rated companies.

More information:
Kelheim Fibres EcoVadis
Source:

Kelheim Fibres

14.10.2021

Monforts: Automated finishing at Knopf’s Sohn

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

The use of a single ECO Booster unit has been calculated to save up to 35% in energy costs, based on fixation processes. Fully automatic operation, set at the Monforts Qualitex control unit, ensures there is no additional burden on the machine operator.

The line is powered by Exxotherm indirect heating, which practically eliminates the yellowing which can be experienced during the treatment of certain polyamide and elastane-based fabrics, and is also equipped with a Conticlean circulating air filter system for constant high drying capacity.

Software
The latest Qualitex visualisation software offers operators reliability and easy control with its full HD multi-touch monitor and slider function, dashboard function with individual adaptation to operating states and faster access to comprehensive recipe data management.

With the Monformatic control system, the exact maintenance of the dwell time in combined treatment processes (drying and heat-setting) can be monitored. When the heat-setting point is reached, the fan speed is automatically adjusted, keeping energy consumption fully under control.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

New EFI Fiery Platform for Production Print (c) EFI
14.10.2021

New EFI Fiery Platform for Production Print

Electronics For Imaging, Inc. announces its newest digital front end (DFE) server solution for digital printing – the EFI™ Fiery® FS500 Pro platform. Fiery FS500 Pro will help print providers meet the challenges of shorter runs, faster turnaround times, less experienced staff, increased security standards and the need to reduce cost. The new Fiery DFE platform brings innovation to an extensive line-up of new digital printers coming for office, commercial, in-plant, packaging, and textile printing.  

The Fiery FS500 Pro platform features five key areas:

Electronics For Imaging, Inc. announces its newest digital front end (DFE) server solution for digital printing – the EFI™ Fiery® FS500 Pro platform. Fiery FS500 Pro will help print providers meet the challenges of shorter runs, faster turnaround times, less experienced staff, increased security standards and the need to reduce cost. The new Fiery DFE platform brings innovation to an extensive line-up of new digital printers coming for office, commercial, in-plant, packaging, and textile printing.  

The Fiery FS500 Pro platform features five key areas:

  • Faster job processing. Print providers will benefit from faster job processing time and up to 40% faster application launch time to produce more jobs per shift.
  • Faster turnaround time for short runs. Advanced Fiery features speed up administration and production of print jobs in fast moving print shops.
  • More sellable print, less waste. Fiery FS500 Pro has more tools available for detecting potential errors in files, reducing both production time and waste.
  • More-accurate brand colors. A new Fiery TrueBrand solution for corporate users makes it easy to ensure accurate printing of brand colors from Microsoft Word or PowerPoint.
  • Advanced security. Fiery FS500 Pro provides new features for high security environments, ensuring compliance with customer security requirements and industry standards.
14.10.2021

Fashion 4 Development and C.L.A.S.S. Eco Hub launch "The ReClothe’s Platform"

Fashion 4 Development and C.L.A.S.S. Eco Hub are pleased to announce the launch of their digital platform called “The Reclothe’s Platform”. The digital platform, which is a joint venture between the two companies, is expected to add significant value to all the stakeholders in the fashion and lifestyle industry. The core objective of the Reclothe’s Platform is to be a one-stop source of information and guide for professionals and students in the fashion and lifestyle industry.

Fashion 4 Development and C.L.A.S.S. Eco Hub are pleased to announce the launch of their digital platform called “The Reclothe’s Platform”. The digital platform, which is a joint venture between the two companies, is expected to add significant value to all the stakeholders in the fashion and lifestyle industry. The core objective of the Reclothe’s Platform is to be a one-stop source of information and guide for professionals and students in the fashion and lifestyle industry.

The ReClothe platform will feature current innovators highlighting the practices & solutions for textile and manufacturers, pushing the industry towards a greener and more sustainable standard. The platform will lead members into scalable and more responsible manufacturing processes, driving responsible innovation practices across all aspects of the supply chain, measured and proved.
 
The joint venture was created in 2021 by Fashion 4 Development and C.L.A.S.S. Eco Hub to support the United Nations Office of Partnerships for the Sustainable Development Goals. Both Fashion 4 Development and C.L.A.S.S. Eco Hub are recognized for their experiences working from broad perspectives to advance the sustainability transformation

14.10.2021

Beaulieu Fibres International showcasing its ‘fibres that build futures’ at INDEX

Beaulieu Fibres International is attending INDEX™20 in Geneva and is excited to accelerate its work helping customers to exceed in product performance and sustainability.

For nonwoven converters serving the hygiene segment, a feature at INDEX™20 will be the company’s optimized Meralux specialty fibre, with fit for use performance and sustainability properties. It offers opacity improvements (reduction of TiO2 for the same opacity levels), higher coverage, higher bulkiness, and improved liquid management.

In addition, Meralux fibres deliver substantial sustainability benefits including about 55% savings in raw materials, with equivalent carbon emission savings, thanks to weight reduction in nonwovens for the same coverage, and higher recyclability of PP/PE.

Beaulieu Fibres International is attending INDEX™20 in Geneva and is excited to accelerate its work helping customers to exceed in product performance and sustainability.

For nonwoven converters serving the hygiene segment, a feature at INDEX™20 will be the company’s optimized Meralux specialty fibre, with fit for use performance and sustainability properties. It offers opacity improvements (reduction of TiO2 for the same opacity levels), higher coverage, higher bulkiness, and improved liquid management.

In addition, Meralux fibres deliver substantial sustainability benefits including about 55% savings in raw materials, with equivalent carbon emission savings, thanks to weight reduction in nonwovens for the same coverage, and higher recyclability of PP/PE.

The latest additions to the hygiene fibres portfolio are Meraspring BICO PET fibres. Meraspring enables nonwovens to combine a softness and loftiness that provides a cushioned, even “well-being”, experience for end-users of applications such as diapers and fem-pads. The fibres are available in a range from 1.7-8.9 dtex with hydrophilic, hydrophobic and wellbeing finishes depending on the properties required in the final product.

In the industrial fibres segment, UltraBond thermal bonding fibre will finally be presented with its INDEX™20 Nonwovens Award in the category "sustainable raw material".

In addition, Beaulieu Fibres International’s new range of MONO low count and BICO fibres are setting new performance standards for the fast-growing air and liquid filtration markets.

At INDEX™20, Beaulieu Fibres International also presenets its Pilot Line to test the waters of co-development opportunities without risk. The Pilot Line offers the utmost flexibility to produce samples, without the typical constraints imposed by industrial production lines, replicating any type of staple fibre spinning technology using different types of polymers and additives and different types of cross sections.

Source:

Beaulieu International Group / EMG

13.10.2021

Mahlo at the Innovative Textile and Apparel Show

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

Solutions for technical textiles and nonwovens
Support in the production process is also available for technical textiles and nonwovens. The focus here is on the Qualiscan QMS quality measurement system. The modularly designed system, which consists of sensors and measuring frames, measures, logs and controls critical parameters such as basis weight, moisture or layer thickness across the entire fabric width. Depending on the application and task, different measuring methods are used for this purpose.

Source:

Mahlo GmbH + Co. KG

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

13.10.2021

RadiciGroup at INDEX with sustainable spunbond

RadiciGroup presents their vision on sustainability at INDEX on the 20th of October at 4pm.

RadiciGroup has been manufacturing polypropylene spunbond for almost 30 years with its well-known brand dylar®. Today the Group adds to its offer Respunsible®, a new sustainable spunbond obtained from recycled polypropylene and RadimeltTM, the brand for meltblown nonwovens and composite nonwovens.

RadiciGroup presents their vision on sustainability at INDEX on the 20th of October at 4pm.

RadiciGroup has been manufacturing polypropylene spunbond for almost 30 years with its well-known brand dylar®. Today the Group adds to its offer Respunsible®, a new sustainable spunbond obtained from recycled polypropylene and RadimeltTM, the brand for meltblown nonwovens and composite nonwovens.

Source:

RadiciGroup

From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability (c) DUARTE
Duarte - SS22 collection
13.10.2021

Duarte - SS22 collection

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind the collection is the superhero Tadao - Ana Duarte’s dog, an English Cocker Spaniel - which is the World Keeper fighting against the environmental issues mankind has generated. Like a protector of sustainability, it battles modern monsters as Smog Man, Fire Man, Deforestation Man and Wave man, who respectively represent the issues of air pollution, climate change, forest destruction and water overconsumption. A very simple, direct and engaging way of talking about hot topics and simple, direct solutions.

The collection is made of 20 outfits, mainly unisex apart from some of them typically feminine as the crop tops. Hints of bright red and mustard yellow are alternated with denim, grey and pale azure tones, blending in with the colorful prints. Accents of black - used in inserts or as piping - seem to emphasize the outline of the garments. The different textures of the materials create a sense of movement, further enhanced by the unique patterns. All the garments’ prints are exclusively designed by the designer, following each collection inspiration: this time, they recall urban landscapes and the appeal of big metropolis, with Tadao as protagonist in prints, patches and ankle socks.

Among the most representative Duarte outfits we find:

  • A matching sweater with trousers made of Newlife™, a yarn 100% made In Italy coming only from post- consumer, traceable plastic bottles.
  • A unisex oversized bomber is crafted from Newlife™, lined with precious 100% Bemberg™ by Asahi Kasei fabric by Gianni Crespi Foderami and matched with printed neoprene hoodie and shorts.
  • Long-panelled unisex coat and trousers made with ReLAST® denim by Candiani, a responsible textile featuring a premium recycled stretch yarn, ROICA™ by Asahi Kasei. The coat is lined with a fabric by Gianni Crespi Foderami in 100% Bemberg™ by Asahi Kasei, a new generation material made from the smart-tech transformation of cotton linter.
  • The same sustainable stretch yarn is implied in the responsible tulle by Iluna Group, and featured in a shorts and top women’s ensemble, paired with a neoprene printed bomber. The tulle is skillfully matched with 100% Tencel™ back in the loop fabric by Maeba International underneath it.

Ana Duarte is part of a new generation of designers with a new approach to sourcing and production: her research goes into different kind of business models to fit her responsible innovation and style needs at the same time. That’s why in her collection we can find amazing and unique combination of organic, recycled, Back in The Loop, innovative materials that are the right choice for the look&touch and the performance she’s looking for. The result is cool yet respecting people and the environment in full traceability thanks to certified and sometimes even circular solutions. Working with components from various sources and business models requires a certain expertise and a particular sensibility we find in Ana Duarte’s design solutions and in her responsible interpretation of streetwear.

13.10.2021

Livinguard: Damit das Maskentragen schützt

  • Livinguard optimiert die eigene, selbstdesinfizierende Technologie und entwickelt erste permanente, biozidfreie Technologieplattform

Die patentierte Technologie des Schweizer Hygiene-Unternehmens Livinguard zerstört kontinuierlich und nachweislich 99,9 Prozent von Krankheitserregern (Mikroben) wie Viren und Bakterien. Dazu zählen unter anderem Influenza- und Gelbfieberviren, Coronavirus SARS-CoV-2 und diverse Varianten des Corona-Virus, Tuberkulose- und E. Coli- Bakterien, Staphylokokken und Salmonellen. Die Livinguard Technologie basiert auf dem Prinzip der physikalischen Desinfektion: Oberflächen werden mit dauerhaft positiven Ladungen versehen, die negativ geladene Mikroben anziehen und deren Zellwände beschädigen, wodurch diese für den Menschen unschädlich gemacht werden.

Mit dieser Technologie ausgestattete Produkte sind über lange Zeiträume wiederverwendbar und damit um ein vielfaches nachhaltiger als Einmalprodukte. Aus diesem Grund wurde der Livinguard Pro Mask im September 2021 der renommierte Award „Sustainability Product of the Year“ verliehen.

  • Livinguard optimiert die eigene, selbstdesinfizierende Technologie und entwickelt erste permanente, biozidfreie Technologieplattform

Die patentierte Technologie des Schweizer Hygiene-Unternehmens Livinguard zerstört kontinuierlich und nachweislich 99,9 Prozent von Krankheitserregern (Mikroben) wie Viren und Bakterien. Dazu zählen unter anderem Influenza- und Gelbfieberviren, Coronavirus SARS-CoV-2 und diverse Varianten des Corona-Virus, Tuberkulose- und E. Coli- Bakterien, Staphylokokken und Salmonellen. Die Livinguard Technologie basiert auf dem Prinzip der physikalischen Desinfektion: Oberflächen werden mit dauerhaft positiven Ladungen versehen, die negativ geladene Mikroben anziehen und deren Zellwände beschädigen, wodurch diese für den Menschen unschädlich gemacht werden.

Mit dieser Technologie ausgestattete Produkte sind über lange Zeiträume wiederverwendbar und damit um ein vielfaches nachhaltiger als Einmalprodukte. Aus diesem Grund wurde der Livinguard Pro Mask im September 2021 der renommierte Award „Sustainability Product of the Year“ verliehen.

Diese bereits erprobte und wirksame Livinguard Technologie hat das Unternehmen nun entscheidend weiterentwickelt und optimiert. Im Rahmen des Kongresses „Restart“ in Berlin im September 2021 stellte das Unternehmen die weltweit erste permanente biozidfreie Desinfektion vor. Diese neue Methode arbeitet weiter auf Basis der bestehenden, patentgeschützten Wirkprinzipien der positiv geladenen Oberflächen. Zudem wirkt die Technologie dauerhaft selbstdesinfizierend und kann über verschiedene Verfahren auf vielen verschiedenen Materialien (darunter Textilien, Kunststoffen und Papier) angewendet werden. Dank dieser permanenten Wirksamkeit der Selbstdesinfektion und der vielfältigen Einsatzmöglichkeiten stellt diese Neuentwicklung eine bahnbrechende Innovation im Bereich der Hygiene dar und ist zugleich ein weiterer wichtiger Schritt in Sachen Nachhaltigkeit.

Die nun erstmals vorgestellte biozidfreie Livinguard Technologie ist aufgrund ihrer auf elektrischer Ladung basierenden Funktionsweise sicher für den Menschen und stellt damit eine hervorragende umwelt- und ressourcenschonende Alternative zu herkömmlichen Desinfektionsmethoden dar. Wissenschaftliche Tests zeigen, dass die antimikrobiellen Eigenschaften an das Trägermaterial binden und so weder durch Zeitablauf oder andere Einflüsse (z.B. Waschung) an Wirksamkeit einbüßen. Da die Livinguard Technologie auf einem mechanischen Wirkprinzip basiert, ist die Bildung von Resistenzen äußerst unwahrscheinlich.
Die Wirksamkeit der zugrundeliegenden biozidfreien Technologie wurde von Dr. Torsten Koburger-Janssen (Hygiene Nord, Deutschland) begutachtet. In seiner Untersuchung konnte er nachweisen, dass die Gesamtkeimzahl auf mit Livinguard Technologie behandelten Textilien nach 48 Stunden signifikant niedriger lag als bei unbehandelten Stoffen. Auch wenn das Keimwachstum nicht völlig unterbunden wurde, so lag auch dieser Faktor deutlich niedriger als in der unbehandelten Vergleichsgruppe. Daneben wurde auch die versprochene Geruchsreduktion auf Textilien von Probanden bestätigt, ohne dass dies eine explizite Fragestellung dieser Gesamtkeimzahl-Untersuchung gewesen wäre.

Die Livinguard Technologie findet in den unterschiedlichsten Bereichen Anwendung, darunter im medizinischen Sektor sowie in diversen Industrien. Derzeit setzt Livinguard seine Technologie mit der biozid und der biozidfreien Formulierungsplattform bei Gesichtsmasken, Kleidung für den privaten Gebrauch und den Beruf, Hygieneprodukten, Computer-Tastaturen sowie bei Luft- und Wasserfiltern ein.

Source:

webershandwick.ch

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

Visionary building – with composite textiles by vombaur (c)vombaur
From the H-profile to the chamber structure – vombaur offers individually developed composite textiles with complex shapes
13.10.2021

Visionary building – with composite textiles by vombaur

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

Safe and durable solutions for challenging applications
The potential applications for lightweight components in the construction industry are as numerous as the project ideas of the planning and construction teams.
•    Ropes and tensioning elements made of carbon fibre reinforced plastic (CFRP)
•    Reinforcement of building structures made of concrete, steel, wood or other materials
•    Sustainable restructuring of constructions and urban districts for bridges and buildings
•    CFC slats as reinforcements in case of repairs
•    (Filled) GRP pipes made of seamless round woven tubes by vombaur as columns/pillars
•    CFRP sections as steel girder substitutes
•    Hollow profiles with individually designed cross-sections
•    Glass fibre reinforced connecting elements for glazing to minimise expansion differences between the connecting element and the glass
•    Individual light wells

Implementing visions – with composite textiles by vombaur
As your development partner, vombaur facilitates innovative composites projects for challenging applications. In innovative and safety-sensitive industries such as automotive and aviation, chemical and plant engineering.  The composites experts at vombaur develop, create samples of and manufacture woven tapes and seamless round or shaped woven textiles by vombaur – in collaboration with the customer's enterprise development teams and individually for the respective projects. This is how novel and unique lightweight components made of high-performance textiles are created for visionary lightweight construction projects.

"Fibre-reinforced composites are the ideal material for future-oriented construction projects," explains Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "Their outstanding technical properties and design possibilities open up new and fascinating perspectives for construction projects. From building construction to civil engineering, from bridge construction to interior design. As an experienced development partner for sophisticated lightweight components, we at vombaur contribute our seamless solutions to these kinds of future-oriented projects."

More information:
vombaur Composites carbon fibers
Source:

vombaur GmbH & Co. KG

Composite textiles by vombaur for innovations in architecture and the construction industry (c) vombaur
Low effort, low weight: Maintenance with fibre-reinforce materials
13.10.2021

Composite textiles by vombaur for innovations in architecture and the construction industry

  • Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

  • Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

In addition, fibre composites offer numerous design options for novel and exceptional new building and maintenance projects:
•    Unique variety of shapes
•    Different structures of the textiles
•    Large spectrum of colours and colour combinations
•    Translucency of the plastic matrix
Thanks to these properties, composites can be used to produce coloured, phosphorescent, thermochromic or – through the use of LEDs or light-conducting fibres permanently integrated into the matrix – luminescent components.

In addition, there are organisational benefits for planning, construction and maintenance work with fibre-reinforced materials:
•    Easier handling and assembly of the far lighter and more flexible components – compared with steel, concrete or wood
•    Faster installation
•    Shorter construction site times in road and bridge maintenance
•    Shorter delivery times
•    Ability to integrate electronic monitoring systems

Individual composite textiles – for every lightweight engineering project
The composites experts at vombaur develop and manufacture woven tapes and seamless round or shaped woven textiles from carbon, glass, flax or other high-performance fibres on special weaving lines for individually specified round and shaped woven textiles – and can therefore offer you the best possible fibre base for every lightweight construction project.

"Regardless of whether it's a new construction or a renovation project, a façade design, a bridge or a staircase – as your development partner for composite textiles, we have plenty of experience with composites for demanding tasks," emphasises Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "We develop, create samples and manufacture woven tapes and seamless round or shaped woven textiles – in collaboration with the customer enterprise development teams and individually for the respective projects." This is how novel and unique lightweight components made of high-performance textiles are created for visionary projects.

13.10.2021

Launch of EFI Reggiani TERRA Silver

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It is a 180-cm wide printer that can print up to 190 sqm per hour with eight dual-channel printheads. The printer also features:

•    A new recirculating ink system for superior reliability and minimum maintenance
•    Several printing modes to ensure maximum flexibility in terms of design capability
•    New, real-time image processing that eliminates time spent in image pre-calculations
•    A user friendly, intuitive interface
•    A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

In Fespa stand 1-G71, attendees can see the EFI Reggiani TERRA Silver print smoothly and precisely on knitted and woven fabrics. The printer’s quality is evident in its high-uniformity printing modes, and it delivers numerous features that enhance the production process, including an accurate WYSIWYG interface and flexible queue management.
 
EFI Reggiani is also a leading developer of textile inks. The EFI Reggiani TERRA pigment inks used on the Silver model deliver excellent wet and dry fastness properties and remarkable sharpness in detail. Designed to leverage EFI Reggiani digital printers’ market-proven industrial performance capabilities, these eco-friendly, water-based inks provide an extraordinary level of print durability and yield longer print head life with reduced maintenance costs. The high-performance digital pigment inks also use an innovative binder technology for fast, sustainable, and cost-competitive industrial textile printing on the widest range of fabrics. Users also gain superior print definition and colour intensity.
 
This year, EFI Reggiani celebrates 75 years of heritage and innovation in the textile world. Always committed to deliver to the market new cutting-edge technologies, EFI Reggiani has world-class products offering boosted uptime and reliability, high performance throughput, and remarkable printing uniformity and accuracy – all while helping customers increase the sustainability of their textile manufacturing activities. Green EFI Reggiani processes give users fast, complete and sustainable solutions across a broad range of textile applications.
 
In this 75th anniversary year, EFI Reggiani has also launched several other ground-breaking solutions, such as EFI Reggiani HYPER, the fastest scanning digital printer on the market, and the EFI Reggiani BLAZE, an industrial entry-level, easy-to-use printer designed to give new textile companies the opportunity to adopt digital inkjet production with a compact solution to blaze a successful path into the industry.

Source:

Electronics For Imaging, Inc.

DyStar Releases 2020 – 2021 Integrated Sustainability Report (c)dystar
Sustainability Performance Report 2020-2021
13.10.2021

DyStar Releases 2020 – 2021 Integrated Sustainability Report

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

The Group has set its sight on achieving the 2025 sustainability target of reducing its production footprint by 30% from 2011 levels for every ton of production. “We will continue to innovate and develop a wide range of products and processes that improve environmental performance and reduce carbon footprint across our value chain”, said Mr Xu Yalin, Executive Board Director of DyStar Group.

Mr Eric Hopmann, CEO of DyStar Group added: “We are also developing various projects in anticipation of future demands from customers as well as adopting more environmentally friendly technologies and improve our workflows and processes. Some of our projects include traceability programs, adopting renewable energy technologies, and digitalizing our business processes.” Understanding the importance of collaborative efforts to drive sustainability across the value chain, DyStar seeks to continually support industrial innovations and develop strategic partnerships to work towards becoming a sustainable and trusted leader in the industry.

Source:

DyStar Press Info

(c) IFNANO e.V.
IFNANO-Schnelltest zum Protein Interleukin 8
13.10.2021

Schnelltests: Vom Ja/Nein bei Corona zu differenziertem Gesundheitsstatus

Spätestens seit der Corona-Pandemie kennt man Antigen-Schnelltests. Ein Rachenabstrich oder eine Speichelprobe reichen aus, um schnell eine mögliche Infektion festzustellen. Doch wie lassen sich Schnelltests für noch anspruchsvollere diagnostische Fragen in der Medizin nutzen? Im Zentrum der Forschung an Instituten der Zuse-Gemeinschaft stehen der Einsatz mehrerer Analyte und damit die gleichzeitige Beprobung auf verschiedene gesundheitliche Fragestellungen ebenso wie Möglichkeiten zum Nachweis sehr geringer Konzentrationen von Substanzen.

Spätestens seit der Corona-Pandemie kennt man Antigen-Schnelltests. Ein Rachenabstrich oder eine Speichelprobe reichen aus, um schnell eine mögliche Infektion festzustellen. Doch wie lassen sich Schnelltests für noch anspruchsvollere diagnostische Fragen in der Medizin nutzen? Im Zentrum der Forschung an Instituten der Zuse-Gemeinschaft stehen der Einsatz mehrerer Analyte und damit die gleichzeitige Beprobung auf verschiedene gesundheitliche Fragestellungen ebenso wie Möglichkeiten zum Nachweis sehr geringer Konzentrationen von Substanzen.

Am Göttinger Institut für Nanophotonik (IFNANO) setzt man dafür auf die Weiterentwicklung von Analyseverfahren, die mit Teststreifen funktionieren, wie man sie nicht nur von Corona-, sondern z.B. auch von Schwangerschafts-tests kennt. Das Grundprinzip dieser Teststreifen: Die Analyte werden in wäss-rigen Medien gelöst dann mit Markern gemischt und auf ein Trägermedium gegeben, auf dem sie bis zur Test- und Kontrolllinie wandern. Die Analyte, wie zum Beispiel das Corona-Virusmaterial, binden sich einerseits an den Marker, der aus einer Farbmarkierung wie z.B. Goldnanopartikeln und dem Antikörper besteht, und anderseits an den Antikörper an der Testlinie. Die Antikörper sind so aufgebaut, dass sie selektiv d. h. möglichst nur einen Analyten, wie das Corona-Virusprotein, binden. Durch das Anreichern der Marker auf den Linien verfärben sich diese und man kann den Test mit bloßem Auge auslesen.

Diagnostik u.a. von Autoimmun-, Stoffwechsel- und Infektionskrankheiten
Ähnlich wie beim IFNANO, so steht auch am Forschungszentrum für Medizintechnik und Biotechnologie in Bad Langensalza (fzmb) bei der Arbeit an Schnelltests im Fokus, mehrere Analyten aus einer einzigen Probe zu bestimmen. Dazu gehören die Diagnostik von Autoimmun-, Stoffwechsel- und Infektionskrankheiten, Allergie- und Nahrungsmittelunverträglichkeitstests sowie Krebsanalytik und Biomarkersuche. „Unsere Entwicklungsprodukte bieten hervorragende Perspektiven für neue Wege in der individualisierten Diagnostik und personalisierten Medizin“, erklärt fzmb-Geschäftsführer Dr. Peter Miethe. Die Auswertesysteme des fzmb ermöglichen nach seinen Angaben die automatisierte, kundenspezifische Analyse auf verschiedenen Trägerformaten wie Mikrotiterplatten, Objektträgern, Membranen und kundenspezifischen Biosen-soren. Als konkrete künftige Einsatzgebiete für die Schnelltests strebt das fzmb u.a. das Erkennen autoimmuner Schädigungen von Gehirnfunktionen beim Menschen an. Hierzu läuft aktuell ein Projekt mit drei Forschungspartnern bei dem Thüringer Institut. Dabei sollen erstmals mehrere Autoantikörper gleichzeitig bestimmt werden, um eine differenzierte Diagnose, individualisierte Therapieeinstellung und Verlaufskontrolle bei Patienten mit autoimmunen neuronalen Erkrankungen zu gewährleisten.

Lab on a Chip-Technologie entwickelt
Kernkompetenz sind Schnelltests mit Hilfe der Bioanalytik auch bei Hahn-Schickard. Neben klassischen Verfahren mit Teststreifen setzen die Forschenden in Freiburg auf die „Lab on a Chip“-Technologie. Die von ihnen entwickelte sogenannte LabDisk, das ist eine Kunststoff-Kartusche, die als Träger für das Testmaterial dient und in ein mobiles Auslesegerät eingeführt wird, hat sich nicht nur in medizinischen Anwendungen, sondern auch in der Umweltanalytik, z.B. in der Qualitätssicherung von Wasser- und Lebensmittelproben bewährt.

Fertigung wieder in Deutschland ansiedeln
Der Pharmabereich ist einer jener Sektoren, in denen Störungen von Produktions- und Logistikketten, bedingt durch Lieferprobleme aus Fernost, während und nach der Corona-Krise schmerzhaft spürbar wurde. „Die Arbeit von Instituten der Zuse-Gemeinschaft ist ein Baustein, um in einigen wichtigen Teilbereichen der Medizintechnik wieder mehr Souveränität zu erlangen“, erklärt der Geschäftsführer der Zuse-Gemeinschaft, Dr. Klaus Jansen.

Source:

Deutsche Industrieforschungsgemeinschaft Konrad Zuse e.V.

12.10.2021

Innovation award “Cellulose Fibre Innovation of the Year 2022”

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online
  • Call for Innovations
  • Six nominees will get the chance to present their unique products

The footsteps are big: in 2021, Stora Enso from Sweden won the innovation award, granted on the first day of the “International Conference on Cellulose Fibres”. Their new cellulose foam for packaging fully convinced the audience. Second place was taken by Kelheim Fibres (Germany) with their high-quality hygiene products made of cellulose ahead of third place occupant Metsä Spring from Finland that presented a new cellulose fibre production process.

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online
  • Call for Innovations
  • Six nominees will get the chance to present their unique products

The footsteps are big: in 2021, Stora Enso from Sweden won the innovation award, granted on the first day of the “International Conference on Cellulose Fibres”. Their new cellulose foam for packaging fully convinced the audience. Second place was taken by Kelheim Fibres (Germany) with their high-quality hygiene products made of cellulose ahead of third place occupant Metsä Spring from Finland that presented a new cellulose fibre production process.

nova-Institute has opened the Call for Innovations for the “Cellulose Fibre Innovation of the Year 2022” award until 15 November 2021. All producers, inventors and pioneers along the entire value chain from feedstock to final product are invited to enter the competition. Developments of new technologies and applications are welcome. An independent expert jury will select a total of six new materials and products from all entries for the award. The innovators get a free 2-day ticket for the conference and the unique opportunity to present and market their product or technology to a huge professional audience. After short presentations of the six candidates at the conference, the three winners will be elected by the participants of the conference and honored with the innovation award at a festive gala dinner.

Following the conference, nova-Institute issues an international press release to announce the winners.

Call for Innovations
More information about the innovation award and the application can be found at www.cellulose-fibres.eu/award-application
Deadline for submission: 15 November 2021

Source:

nova-Institut GmbH

12.10.2021

ALUMO to become wholly-owned subsidiary of AG Cilander

Two long-established companies are joining forces: as of October 2021, textile finishing specialist AG Cilander from Herisau, Switzerland, will acquire 100 percent of ALUMO AG, an Appenzell-based manufacturer known for producing ultra-fine cotton fabrics to exacting Swiss quality standards.

The textile finishing industry is an environment in which quality, new technologies and a keen interest in innovative textile solutions play a crucial role. In this business, strong, reliable alliances with customers and partners are vital pillars to allow growth while still satisfying the high expectations set for the materials used. By acquiring ALUMO AG, the world leader in ultra-fine cotton fabrics, AG Cilander expands into a new market segment, setting the course for successfully broadening its product portfolio and tapping into new sales markets.

Both companies can look back on a long tradition of expertise in the textile industry, and their partnership has been a very successful one for years.

Two long-established companies are joining forces: as of October 2021, textile finishing specialist AG Cilander from Herisau, Switzerland, will acquire 100 percent of ALUMO AG, an Appenzell-based manufacturer known for producing ultra-fine cotton fabrics to exacting Swiss quality standards.

The textile finishing industry is an environment in which quality, new technologies and a keen interest in innovative textile solutions play a crucial role. In this business, strong, reliable alliances with customers and partners are vital pillars to allow growth while still satisfying the high expectations set for the materials used. By acquiring ALUMO AG, the world leader in ultra-fine cotton fabrics, AG Cilander expands into a new market segment, setting the course for successfully broadening its product portfolio and tapping into new sales markets.

Both companies can look back on a long tradition of expertise in the textile industry, and their partnership has been a very successful one for years.

ALUMO AG will continue to operate as an independent company based in Appenzell, keeping the same strategic direction in the fabrics offered and the same standards for excellence in service and quality.

More information:
AG Cilander ALUMO
Source:

crystal communications