From the Sector

Reset
20 results
20.09.2023

Stahl: Second consecutive Platinum EcoVadis rating

Stahl, a leading provider of coating technologies for flexible substrates, has been awarded a Platinum rating by the sustainability rating agency EcoVadis for the second consecutive year. For the 2023 EcoVadis assessment, Stahl’s rating increased by three points compared to its 2022 score, reflecting the company’s improved performance in the area of labour and human rights.

Stahl, a leading provider of coating technologies for flexible substrates, has been awarded a Platinum rating by the sustainability rating agency EcoVadis for the second consecutive year. For the 2023 EcoVadis assessment, Stahl’s rating increased by three points compared to its 2022 score, reflecting the company’s improved performance in the area of labour and human rights.

Progress in the Labour & Human Rights category
The 2023 EcoVadis assessment revealed the progress Stahl is making in the Labour & Human Rights category, where Stahl scored 90 out of a possible 100 points. This reflects the company's recent work to improve its health and safety management systems. In particular, the majority of Stahl’s global manufacturing sites are now ISO 45001 certified and more than 94% are ISO 14001 certified. Stahl has also taken steps to improve its approach to employee career development and well-being. These include the creation of an individual career plan for all employees and the introduction of a new company-wide employee satisfaction survey.
 
Stahl moves forward with 2030 ESG ambitions
Stahl has set a 2030 target to maintain its EcoVadis Platinum rating by working closely with its value chain partners to help them reduce their impact. In 2022, 83% of Stahl’s total spend on raw materials was sourced from EcoVadis-rated suppliers.

EcoVadis is a globally recognised, evidence-based rating platform that assesses the performance of more than 90,000 organisations against key sustainability criteria across four categories: Environment, Labour & Human Rights, Ethics and Sustainable Procurement. For the 2023 EcoVadis assessment, Stahl received an overall score of 80 out of 100, up from 77 in 2022. This score indicates an advanced level of sustainability maturity and ensures that Stahl retains its Platinum rating. This is awarded to the top 1% of companies assessed by EcoVadis. Stahl achieved its first Platinum rating in 2022, having undergone its first EcoVadis assessment in 2015.

More information:
EcoVadis Stahl
Source:

Stahl

OETI purchases ECS to expand its PPE portfolio photo: OETI
12.07.2023

OETI purchases ECS to expand its PPE portfolio

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

ECS tests and evaluates occupational health and safety goggles with and without a filter action, passive and active switching protection filters and shields for welders, and laser protection filters, goggles, and shields. The company also tests the optical properties of sunglasses, sports glasses, ski goggles, swimming goggles and motorbike goggles.

With OETI’s takeover, the ECS location in Aalen is retained, and all employees will continue working at ECS. The new Managing Director of ECS GmbH as of 1 July 2023 is Dipl.-Ing. Rolf Diebolder.

‘We are present on the European market, on the American market and, via a representative office, on the Chinese market. With the aid of the new distribution channels through OETI and TESTEX, we want to steadily advance ECS’ expansion and be present on all five continents’, says Managing Director Rolf Diebolder, explaining his strategic plans for ECS. ‘I would like OETI and ECS to develop a joint strategy in order to be able to offer existing and new customers of both companies a complete package which, when combined, will give us a unique selling point in the marketplace’, says Diebolder.

Diebolder also sees further potential in the cooperation with regard to protective laser clothing. According to him, this is where the laser laboratory commissioned by ECS could be used to make textiles laser-safe. In the future, there will be more and more ‘hand-held’ devices, i.e. laser welding devices, for which gloves and protective jackets are needed.

Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

15.03.2023

GOTS Version 7.0 released

The Global Organic Textile Standard is pleased to announce the release of GOTS Version 7.0, which features an expanded scope of environmental and social criteria while maintaining a standard that is practicable for industrial production and appropriate for a wide range of products. During the regular year-long revision process, international stakeholders with expertise in organic production, textile processing, textile chemistry, human rights and social criteria, as well as representatives from industry, NGOs and civil society organisations, contributed to the new Version 7.0 through multiple consultation rounds. Final decisions were made by the multistakeholder GOTS Standard Revision Committee.

The Global Organic Textile Standard is pleased to announce the release of GOTS Version 7.0, which features an expanded scope of environmental and social criteria while maintaining a standard that is practicable for industrial production and appropriate for a wide range of products. During the regular year-long revision process, international stakeholders with expertise in organic production, textile processing, textile chemistry, human rights and social criteria, as well as representatives from industry, NGOs and civil society organisations, contributed to the new Version 7.0 through multiple consultation rounds. Final decisions were made by the multistakeholder GOTS Standard Revision Committee.

GOTS Version 7.0 provides a comprehensive solution for companies who want to produce organic textiles ensuring compliance with environmental and human rights due diligence along the entire supply chain, from field to finished product. With full traceability from origin to destination, GOTS certification provides an efficient means of verifying genuine sustainability efforts. GOTS 7.0 introduces new requirements to conduct risk-based due diligence of Certified Entities’ own operations and their supply chains based on the UN Guiding Principles for Business and Human Rights and the OECD guidelines. The Social Criteria section was substantially revised to include a broader human rights-focused approach. GOTS 7.0 now allows recycled organic fibres as additional materials. Key requirements, such as certified organic fibre content, a general ban on toxic and harmful chemicals such as PFAS, conventional cotton and virgin polyester restrictions, and social compliance management, are maintained in GOTS Version 7.0.

Some of the changes in Version 7.0 include:

  • GOTS and the Manual for the Implementation of GOTS were restructured, and sections were grouped to reflect the standard’s scope.
  • New due diligence criteria ensures that Certified Entities address their actual and potential negative impacts on human rights and the environment.
  • GOTS Environmental Criteria, Product Stewardship, and Environmental Health and Safety (EHS) requirements will also apply to the subcontractors of chemical formulators.
  • Criteria for the incoming organic material have been made stricter.
  • Quinoline is included among the prohibited substances and some existing restrictions have been made tighter such as of “aniline, free”, residue limit is decreased to 20 mg/kg from 100 mk/kg.
  • GOTS 7.0 reduces the permissible quantity of recycled synthetic (polymer) fibres in its certified products, taking into account the disadvantages associated with recycled synthetics, such as microplastics and poor quality.
  • In the pursuit of circularity, GOTS will allow use of recycled GOTS Goods waste as an additional fibre in its certified products.
  • GOTS Human Rights and Social Criteria will now require Certified Entities to respect internationally recognised human rights protocols, including the International Bill of Human Rights and other international human rights treaties.
  • Criteria concerning Discrimination, Violence and Harassment were revised to make them more comprehensive and include the International Labour Organisation (ILO) Violence and Harassment Convention (C190).
  • Certified Entities are now required to develop a plan to cover the living wage gap.
  • GOTS Occupational Health and Safety criteria were revised to consider best international practices and recommendations from the ILO.

For more information, see the following documents:

Source:

GOTS

01.02.2023

Carbios appoints new Executive Committee Members

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Carbios has strengthened its leadership team with the appointment of Martine Brisset as Senior Vice President from 1 January 2023. Martine will manage the Biodegradation Division and supervise the Human Resources, Legal, Regulatory, Project Management, Quality Health and Safety departments. Martine Brisset joins the Group’s Executive Committee, as does Delphine Denoizé, who remains Innovation Programs Funding, Regulation and LCA Director with an expanding team.

Martine Brisset has over 30 years of General Management experience in international groups within the plastic and paper packaging industry, most notably at Amcor, Huhtamaki, Linpac and Klockner Pentaplast.  Since 2021, she has held the position of General Manager of Carbiolice in order to integrate this high-potential subsidiary dedicated to biodegradation within the Carbios Group. In her new position as Senior Vice President of Carbios, her main mission will be to successfully deploy the biodegradation technology, facilitate the international expansion of Carbios’ activities, organise the recruitment and training of the Group’s employees. With numerous recruitments planned throughout the company in 2023, building Carbios’ attractivity will be a strategic topic.

After several years working in innovation within the agricultural industry, Delphine Denoizé joined the Carbios in 2016 and was one of its first twenty employees. Initially in charge of Innovation Funding and Regulation, then Project Management for PET biorecycling, she now oversees all the Group’s projects. Her responsibilities include French and European public funding for innovation, regulatory compliance of processes and products around the world, and assessment of their environmental impact through specific tools such as Life Cycle Assessment.

More information:
Carbios Recycling plastics
Source:

Carbios

10.08.2022

Bluesign defines “sustainable attributes” for approved chemicals

By defining “sustainable attributes” for bluesign® APPROVED chemicals registered in the bluesign® FINDER, Bluesign is furthering its ability to provide more sustainable solutions by providing specified search functions to help chemical suppliers and the textile industry make better informed decisions. The bluesign® FINDER is a web-based, advanced search engine for manufacturers. It contains a positive list of preferred chemical products. Today more than 20,000 bluesign® APPROVED chemical products are registered in the bluesign® FINDER.

Bluesign® APPROVED chemical products meet the stringent bluesign® CRITERIA for chemical assessment. That means that the approved chemicals are produced following occupational health and safety (OH&S) practices with less environmental impact and excellent Product Stewardship following the principles of Input Stream Management and sustainable chemistry.

By defining “sustainable attributes” for bluesign® APPROVED chemicals registered in the bluesign® FINDER, Bluesign is furthering its ability to provide more sustainable solutions by providing specified search functions to help chemical suppliers and the textile industry make better informed decisions. The bluesign® FINDER is a web-based, advanced search engine for manufacturers. It contains a positive list of preferred chemical products. Today more than 20,000 bluesign® APPROVED chemical products are registered in the bluesign® FINDER.

Bluesign® APPROVED chemical products meet the stringent bluesign® CRITERIA for chemical assessment. That means that the approved chemicals are produced following occupational health and safety (OH&S) practices with less environmental impact and excellent Product Stewardship following the principles of Input Stream Management and sustainable chemistry.

In addition to the existing functions within the bluesign® FINDER, bluesign® SYSTEM PARTNER chemical suppliers can claim selected sustainability attributes for their bluesign® APPROVED chemical products that will be displayed within the bluesign® FINDER. Sustainability claims will be verified by Bluesign during on-site assessments and through chemical assessments. Requirements and data provisions will be laid out in the criteria: bluesign® CRITERIA for chemical assessment ANNEX: Sustainability attributes for bluesign® APPROVED chemical products.

The bluesign® FINDER will be amended with search functions starting this year with the below first priority attributes:

  1. Renewable feedstock (biomass* or bio-based)
    The sustainability attribute ‘Renewable feedstock (biomass or bio-based)’ is intended for use with any chemical product that contains at least 20% biomass content by weight in the form of biomass-derived carbon.
  2. Sustainably sourced renewable feedstock (biomass* or bio-based)
    The sustainability attribute ‘sustainably sourced renewable feedstock (biomass or bio-based)’ is intended for use with any chemical product that contains at least 20% biomass content by weight in the form of biomass-derived carbon. The biomass content shall originate from land that is certified sustainable.
  3. Recycled content
    The sustainability attribute ‘Recycled content’ is intended for use with any chemical product that contains at least 20% recycled content by weight. For the calculation of the recycled content only the dry content of the chemical product shall be regarded, excluding water.
More information:
bluesign chemicals Sustainability
Source:

Bluesign

Photo: © 2022, Steiger Participations
11.07.2022

Swiss Textile Machinery technology and innovations for technical textiles

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

Feel-good technical fabrics
Some technical textiles feel like a second skin. A well-known example is activewear from the ‘sport tech’ field. Activewear includes breathable clothing, usually consisting of a three-layer-laminate: an inner lining, a breathable membrane in the center, and an outer fabric. The challenge is to bond the individual layers without losing breathability or softness, while meeting technical requirements such as resistance to a number of wash cycles.

Bonding solutions meeting top quality requirements, as well as ambitious standards for environmental protection and sustainability, were reinvented by the Cavitec brand from the Santex Rimar Group. This company’s hotmelt technology uses one-component polymers applied to textiles in a hot, molten state. Bonding based on hotmelts is both water- and solvent-free. Drying and exhaust air cleaning are not necessary, which is an ecological advantage. Energy consumption is also significantly lower. Cavitec hotmelt technology is also developed for laminated medical protection fabrics which are safe, high-quality and sustainable. These fabrics can be washed, sterilized, and used again.   

A second skin with added value is the result of Jakob Müller Group’s cooperation with an institute for an established outdoor fashion brand. They have devised a heating mat applied as an inner jacket. Outdoor gear with a heated inlay offers the wearer a comfortable feeling even in a cold climate. The heating mat is particularly light, breathable, flexible and adjustable to three temperature levels.

Fabrics with these advantages are now possible thanks to multi direct weaving (MDW) technology from the Jakob Müller Group. A lacquer-insulated heating strand is inserted into the base textile as a ‘meander’ using MDW technology. The technology is offered with both label weaving machines and the latest generation of ribbon weaving machines. The textile pocket calculator is another MDW based future-oriented application developed in cooperation with a textile research institute.

Safety and health
Life-saving reliability is a must for vehicle airbags. They have to fulfil high security aspects, and must remain inflated for several seconds when an accident occurs. Airbags made of flat-woven fabric – cut and seamed – can show weakness at seams during the inflation phase. Latest Jacquard technology by Stäubli enables one-piece-woven (OPW) airbags to be produced, creating shape and structure in a single process. The final product is an airbag consisting of a sealed cushion with woven seams. OPW airbag weaving reduces the number of production steps, and increases the security aspects.
Another big advantage of Stäubli’s new weaving technology is the flexibility in formats required in today’s mid- and upper-range cars, where lateral protection (in the seat or in the roof over the door) has become standard and is designed in line with the car shape. Safe airbags are woven on modern high-speed weaving machines. The warp material, the variety of fabric patterns, and the importance of precisely shaped airbags require the use of a robust and reliable Jacquard machine.

A revolution for orthopaedic patients is a knitting machine from Steiger Participations, which uses compressive yarns developed to meet the needs of the specific health market. This machine model was exclusively designed for production with inlaid elastic yarns and offers optimum performance with guaranteed final product quality.

In the orthopaedic field, many Steiger flat knitting machines have already been operating as automatic, custom-made production systems. For example, the dimensions of an injured limb are taken by the doctor and fed into a web-based application. The doctor selects the compression class in the various sections of the item and a data file created by the software automatically applies a preconfigured program. With no human intervention required, the program is generated and produced on the machine, precisely matching the patient’s dimensions. Each product is different, and generally available within 48 hours.

22.06.2022

Dr Sharon McGuinness selected as ECHA’s new Executive Director

The Management Board of the European Chemicals Agency has selected Dr Sharon McGuinness as ECHA’s next Executive Director. As part of the appointment procedure, she will make a statement before the European Parliament and answer questions from its members. This is tentatively scheduled for 4 July 2022.

Dr Sharon McGuinness, an Irish national, is the Chief Executive Officer of the Health and Safety Authority (HSA) in Ireland since 2018. Prior to this, she was the Assistant Chief Executive for the Chemicals and Prevention Division within the Authority, with responsibility for division management, policy provision, advice and enforcement for a wide range of occupational health and safety, chemical and market surveillance legislation aimed at protecting human health and safety for workers and consumers.

She was a member of ECHA’s Management Board between 2014-2020 and Chair of the Board between 2016-2020. She graduated from the University College Dublin with a B.Sc. (Hons) in pharmacology and chemistry, and she holds a PhD in pharmacology, as well as diplomas in Legal Studies and Company Direction.

The Management Board of the European Chemicals Agency has selected Dr Sharon McGuinness as ECHA’s next Executive Director. As part of the appointment procedure, she will make a statement before the European Parliament and answer questions from its members. This is tentatively scheduled for 4 July 2022.

Dr Sharon McGuinness, an Irish national, is the Chief Executive Officer of the Health and Safety Authority (HSA) in Ireland since 2018. Prior to this, she was the Assistant Chief Executive for the Chemicals and Prevention Division within the Authority, with responsibility for division management, policy provision, advice and enforcement for a wide range of occupational health and safety, chemical and market surveillance legislation aimed at protecting human health and safety for workers and consumers.

She was a member of ECHA’s Management Board between 2014-2020 and Chair of the Board between 2016-2020. She graduated from the University College Dublin with a B.Sc. (Hons) in pharmacology and chemistry, and she holds a PhD in pharmacology, as well as diplomas in Legal Studies and Company Direction.

Dr McGuinness was one of the candidates preselected by the European Commission after an open competition and interviewed by the Management Board for the post.

Her selection follows that of Bjorn Hansen who retired in March 2022. Since 1 April 2022, Shay O’Malley has been ECHA’s acting Executive Director.

The term of office of the Executive Director is five years. It may be prolonged by the Management Board once, for a further term of five years.

More information:
ECHA Dr Sharon McGuinness
Source:

ECHA

31.05.2022

TOS+H EXPO 2022 concludes 4th edition of trade fair in Turkey

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

“The remarkable outcome of TOS+H EXPO 2022 is clearly asserting its significance as the leading trade fair for the industry, in Turkey,” says Petra Cullmann, Executive Director at Messe Düsseldorf. “Our new partner, the Istanbul Chamber of Industries, paved the way for a high-caliber symposium with inspiring insights and intensive discussions, and our exhibitors again proved their expertise with a comprehensive overview of innovative products, equipment and services at the trade fair. We are proud to be sending clear signals in the market. We're giving a lead, both in Turkey and beyond, on the element that matters most: the individual.”

TOS+H Expo 2022 and the Occupational Health and Safety Symposium organized by the Istanbul Chamber of Industry were officially opened on May 14, 2022 by Ms. Petra Cullman, Executive Director Messe Düsseldorf and Sadık Ayhan SARUHAN, ICI Vice President. The new partnership with the Chamber of Industry will ensure the quality of the event and also strengthen the leading position of TOS+H Expo in Turkey.

“The Occupational Health and Safety Symposium, which we organized simultaneously with the 4th TOS+H Expo - Turkish Occupational Safety + Health Exhibition, was concluded with the presentations of 84 speakers in 22 sessions. Our symposium included highly interesting presentations on the environment, sustainability and labor law and was met with great interest by all parties and especially by representatives from all industrial sectors which deal with the topic of occupational safety and health at work. As ICI, we will continue to work to improve OHS processes in the next period”, said a spokesperson for the Istanbul Chamber of Industry.

Source:

Messe Düsseldorf GmbH

21.03.2022

TOS+H Expo 2022 - Istanbul Chamber of Industry strengthens trade fair's position as new partner

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

"As a trade fair for occupational safety and health, TOS+H Expo brings together experts from industry and commerce. The Istanbul Chamber of Industry has set itself the goal of covering the TOS+H Expo, 4th Turkish Occupational Safety and Health Exhibition and the Occupational Health and Safety Symposium, which will be held in parallel, with currently relevant as well as forward-looking topics, thus enriching the trade fair", said a spokesperson for the Istanbul Chamber of Industry.

Symposium to be held parallel with TOS+H Expo 2022.
While TOS+H Expo, as a trade fair for occupational safety and health, networks experts from industry and commerce, the “Istanbul Chamber Of Industry Occupational Health and Safety Symposium” addresses current occupational safety and health issues and provides important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. So far, 87 national and international exhibitors from ten different countries have registered for TOS+H Expo 2022.

More information:
TOSH Messe Düsseldorf
Source:

Messe Düsseldorf

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup

06.05.2021

SEEK, PREMIUM and FASHIONTECH cancelled – moved to January 2022

“The consequences of the ongoing pandemic spread of the coronavirus continue to govern our personal and professional lives. It is with a heavy heart that we must cancel the physical events in July, since these are not allowed to take place given the current legal constraints. Due to the lack of certainty for planning and new monthly evaluation we need to fulfil our obligations as event organiser and avoid unforeseeable risks for partners and clients.” Anita Tillmann, Managing Partner of the PREMIUM GROUP

A lack of permissions, adjustments to official measures at short notice, travel restrictions within Europe and overseas, potential quarantine obligations, short-term work in many companies – overall, a volatile situation makes it impossible to press ahead with the necessary planning in a responsible, risk-free way, especially for the exhibitors and partners.

Because of this, the organizers are now forced to cancel SEEK, PREMIUM and FASHIONTECH events in July 2021 and move them to January 2022 instead. Safeguarding the health and safety of exhibitors, guests, partners and employees always takes top priority.

“The consequences of the ongoing pandemic spread of the coronavirus continue to govern our personal and professional lives. It is with a heavy heart that we must cancel the physical events in July, since these are not allowed to take place given the current legal constraints. Due to the lack of certainty for planning and new monthly evaluation we need to fulfil our obligations as event organiser and avoid unforeseeable risks for partners and clients.” Anita Tillmann, Managing Partner of the PREMIUM GROUP

A lack of permissions, adjustments to official measures at short notice, travel restrictions within Europe and overseas, potential quarantine obligations, short-term work in many companies – overall, a volatile situation makes it impossible to press ahead with the necessary planning in a responsible, risk-free way, especially for the exhibitors and partners.

Because of this, the organizers are now forced to cancel SEEK, PREMIUM and FASHIONTECH events in July 2021 and move them to January 2022 instead. Safeguarding the health and safety of exhibitors, guests, partners and employees always takes top priority.

SEEK and PREMIUM are live events and therefore spaces for engaging with others face-to-face. They are a vital meeting point for the whole industry that can only be augmented by our digital offerings. Under the current unpredictable conditions the usual levels of service cannot be guaranteed for clients and visitors.

July will see the start of Frankfurt Fashion Week (FFW) digital. Frankfurt Fashion Week Studio is the core element of the FFW opening season and encompasses the whole FFW ecosystem – with its key themes of Fashion Business, sustainability and digitisation – in the form of a digital portal.

FFW Studio is a progressively curated and staged platform that brings together all German fashion trade shows, conferences, fashion experiences and events under one roof for the first time. First as a digital venue, then as a hybrid one. For pioneers, brands, experiences, entertainment and networking.

“Over the past year we have felt a great sense of solidarity. The industry has given us enormous encouragement and the assurance that we are not only missed but needed. So we want to say thank you from the bottom of our hearts! We can't wait to get together in a few short months’ time to present concepts and projects, meet up face-to-face, and shape the future together. Now more than ever!” Anita Tillmann, Managing Partner of the PREMIUM GROUP   

More information:
SEEK, Fashion Week PREMIUM
Source:

PREMIUM GROUP

14.04.2021

NCTO requests Agency to grant Approval for Collection of China 301 Duties

National Council of Textile Organizations (NCTO) President and CEO Kim Glas sent a letter to Acting Director of the Office of Management and Budget (OMB) Robert Fairweather, requesting the agency reconsider and approve a proposal to direct U.S. Customs and Border Protection (CBP) to collect Section 301 penalty duties on billions of dollars of Chinese goods currently shipped duty free under Section 321 de minimis waivers.

“There has been an exponential growth of shipments to the United States in recent years that qualify for Section 321 duty-free treatment,” Glas said in the letter. “U.S. manufacturers of textiles, apparel and other consumer goods that routinely sell for less than the $800 de minimis threshold increasingly find their markets and workforce threatened by this tariff avoidance scheme.”

The letter details how the current Section 321 provision is now being coupled with e-commerce to provide billions in duty avoidance on these imported products, including:

National Council of Textile Organizations (NCTO) President and CEO Kim Glas sent a letter to Acting Director of the Office of Management and Budget (OMB) Robert Fairweather, requesting the agency reconsider and approve a proposal to direct U.S. Customs and Border Protection (CBP) to collect Section 301 penalty duties on billions of dollars of Chinese goods currently shipped duty free under Section 321 de minimis waivers.

“There has been an exponential growth of shipments to the United States in recent years that qualify for Section 321 duty-free treatment,” Glas said in the letter. “U.S. manufacturers of textiles, apparel and other consumer goods that routinely sell for less than the $800 de minimis threshold increasingly find their markets and workforce threatened by this tariff avoidance scheme.”

The letter details how the current Section 321 provision is now being coupled with e-commerce to provide billions in duty avoidance on these imported products, including:

  • Increased import price pressure on domestic manufacturers of various types of consumer items that routinely sell for less than $800 such as – apparel, footwear, home furnishings, toys, consumer electronics, flatware, auto parts, etc.
  • An inability to properly identify and block the importation of adulterated products posing a health and safety risk to consumers.
  • An inability to properly identify and block imports of counterfeit products that violate intellectual property laws.
  • Enhanced ability of countries like China to access the U.S. market, despite their failure to provide reciprocal access to their markets and their persistent illegal and unfair trading practices.

“Imported merchandise from China that enters under a Section 321 waiver is exempt from all normal tariffs and any penalty duties assessed under the current 301 case. This unreasonable and unnecessary duty exemption severely undermines the purpose and value of the existing Section 301 determination against China as an effort to address its longstanding predatory trade practices,” Glas stated.

“The Biden administration should undertake an exhaustive review of this problem to develop the policy changes needed to mitigate the damaging impact of Section 321 waivers on U.S. workers and manufacturers,” Glas added. “In the interim, it is critical that the OMB and CBP take reasonable steps, such as denying Section 321 benefits to goods covered under the existing China 301 determination [tariffs]. Doing so would be a valuable first step toward limiting the dangerous and growing exploitation of this tariff waiver mechanism.”

See the full letter here.

15.02.2021

Hexcel’s HexPly® XF Surface Technology for Blade Surface Finishing Process

Hexcel announces its latest HexPly® XF surface technology that reduces shell manufacturing time within the wind blade surface finishing process. HexPly XF increases overall blade manufacturing efficiency by reducing time in the mold by up to two hours and by banishing surface defects that require rework before painting.

Hexcel’s HexPly XF surface technology has been formulated to address the limitations of current blade shell surfacing techniques whereby pinholes and other surface defects have to be repaired by hand to achieve the perfectly smooth surface required for painting.

HexPly XF surface technology introduces a new material format as the surface finishing layer, eliminating the need for a traditional in-mold gel coating process. HexPly® XF for infused rotor blades, is a lightweight non-woven semi-preg construction, comprising an epoxy resin matrix, that co-cures with standard epoxy infusion systems. The product has a successful track record in prepreg blades and has now been adapted for infusion processes.

Hexcel announces its latest HexPly® XF surface technology that reduces shell manufacturing time within the wind blade surface finishing process. HexPly XF increases overall blade manufacturing efficiency by reducing time in the mold by up to two hours and by banishing surface defects that require rework before painting.

Hexcel’s HexPly XF surface technology has been formulated to address the limitations of current blade shell surfacing techniques whereby pinholes and other surface defects have to be repaired by hand to achieve the perfectly smooth surface required for painting.

HexPly XF surface technology introduces a new material format as the surface finishing layer, eliminating the need for a traditional in-mold gel coating process. HexPly® XF for infused rotor blades, is a lightweight non-woven semi-preg construction, comprising an epoxy resin matrix, that co-cures with standard epoxy infusion systems. The product has a successful track record in prepreg blades and has now been adapted for infusion processes.

Easy to handle and supplied in a ready to use roll form, HexPly XF can be quickly applied by hand or with semi-automated layup equipment. It features one self-adhesive, surface finishing side - indicated by a removable protective foil. This side of the prepreg is placed against a release agent treated mold surface. Once the material has been positioned, the lay-up of the blade shell structure can start immediately, and the laminate can be infused. After curing, the blade is de-molded with the manufacturer benefitting from a pinhole-free surface that needs minimal preparation before painting.

HexPly XF material is less than half the weight of a typical gel coat per square meter, reducing the overall weight of the blade. Additionally, the consistent areal weight and thickness of the prepreg film provide a completely uniform surface coating, ensuring blade weight distribution and balance are maintained, which is critical as rotor diameters continue to increase. With no need to handle or mix liquid chemicals as in the gel coat process, HexPly® XF also improves the health and safety working conditions on the shop floor.

The material has a shelf life of six weeks at ambient temperature, which also minimizes cold storage requirements and helps to reduce scrap.

Source:

100% Marketing

21.08.2020

No Trevira CS joint booth at Heimtextil 2021

  • Successful concept to be continued in 2022

For three years now, the Trevira CS joint fair booth, where Trevira, its customers and partners present their new ideas within the framework of an innovative creative concept, has been an established and popular feature of Heimtextil. In 2021, the international trade fair for home and contract textiles is planned to take place from 12-15 January in Frankfurt/Main. However, as a result of the numerous uncertainties brought about by the coronavirus crisis, Trevira has decided that it will not take part next year.

  • Successful concept to be continued in 2022

For three years now, the Trevira CS joint fair booth, where Trevira, its customers and partners present their new ideas within the framework of an innovative creative concept, has been an established and popular feature of Heimtextil. In 2021, the international trade fair for home and contract textiles is planned to take place from 12-15 January in Frankfurt/Main. However, as a result of the numerous uncertainties brought about by the coronavirus crisis, Trevira has decided that it will not take part next year.

“Messe Frankfurt has shown us its comprehensive hygiene concept and plans and there is no question that their plans fully meet health and safety requirements,” explained Trevira CEO Klaus Holz. “But at Trevira, we are also very much aware of our responsibilities. Our joint booth concept is not only on an extensive scale, but it is also built around the idea of communication. This makes it even more important that we consider the potential risks involved and how they could impact our customers, co-exhibitors, visitors and staff.” Given the uncertainty as to how the situation might develop in the future, Trevira has decided it has no option but to withdraw from next year’s fair and postpone its participation in Heimtextil until 2022. This decision has been made in agreement with parent company Indorama Ventures PCL (Thailand), which has put stringent measures in place to keep its staff and customers safe. As a result, the concern and its subsidiaries are not currently participating in any trade fairs.

At the 2020 Heimtextil, Trevira exhibited together with around 30 of its major Trevira CS customers with a joint booth whose total floor area measured over 2,000 msq. The number of partners exhibiting alongside Trevira has increased steadily over the past three years, and the Trevira display, along with many of the newest flame retardant Trevira CS collections from its customers, has always been hugely popular at the fair, especially in Hall 4.2, where it has continually attracted a very high number of visitors. As a joint booth, it has benefited especially from the vibrant and positive discussions among visitors and exhibitors, together with the various events that accompany the display. Usually, these included a press conference and a party held at the new stand. Trevira’s Heimtextil presence in the past three years has strengthened and expanded the position of Trevira CS as the leading brand for flame retardant home textiles.

CEO Klaus Holz said, “As a regular exhibitor at Heimtextil for many years, we found this decision extremely difficult. We greatly regret that we will not be able to bring our joint booth to Heimtextil next year. However, we plan to return in 2022 with a fair booth offering visitors and partners the high quality they have come to expect of us, with brand new ideas and measures in place to ensure its success”.

Source:

Trevira GmbH

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings   (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles 2020
21.08.2020

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Ms Wen continued: “Our first priority is to create a clean and hygienic space for all participants to source and network. To achieve this goal, the fair will implement extra health care and hygiene precautions onsite. On the other hand, we are aware that a number of travel restrictions are still in place across the world. With this in mind, Intertextile will offer a series of online services for those who are unable to travel to Shanghai, allowing the fair to reach as wide an audience as possible.”

2020 fair highlights

To provide buyers with greater efficiency, the fair, which covers four halls, will be divided clearly by product categories: Household Hall (hall 3), International Brands / Upholstery Hall (hall 4.1), Brand Fabrics Hall (hall 5.1) and Sofa Fabrics Hall (hall 6.1).

In addition, the Contract Business 360° concept will return this year, with over 40 premier upholstery exhibitors presenting their latest textile products and furnishing solutions for contract use. Exhibitors include Guangzhou Yuanzhicheng Home Textile, Haining Julai Textile, JAB, Morgan Shanghai, Symphony Mills, Suzhou Roufang, Ter Molst International, Zhejiang Hexin and Zhejiang Maya Fabric. Furthermore, top brands such as Agmamito from Poland and Wollsdorf Leather from Austria will be exhibiting for the first time at Intertextile.

Online business matching platform offers new sourcing landscape

Although face-to-face interaction is irreplaceable, a virtual complement has become more important as a result of the worldwide pandemic. To support the industry during these unprecedented times, Intertextile has launched a brand new online business matching platform. With this free service, participants are able to source and network at their fingertips. The virtual platform will offer many new features including:

  • Easy sourcing: exhibitors are categorised by product groups including Sofa / Decorative Fabrics, Curtains and Accessories, Bedding and Finished products, Shading and Accessories, and Editors
  • Live-streamed product presentations of exhibitors
  • Smart recommendations: pre-selected exhibitor lists will be provided to buyers based on their personal preferences and interests
  • Convenience: participants are able to use the service through computers or portable devices without the need to download any software

High quality fringe programme covers comprehensive topics
 
The fair’s event programme will once again provide the industry with the latest trends and insights in four topics: Design Inspiration, Business O2O, Textile & Technology and Industry Empowerment. One of the highlights will be the 2021 Intertextile Trend Forum, led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum will bring together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who will delve into the theme of 2021 Intertextile Trends–“BOUND”, as well as the Chinese market conditions. The event will be held on day 1 of the fair, from 14:00 – 17:00 in hall 5.1 booth C18, and streamed live online.

Another not-to-be-missed event is the Ride the Storm – Home Textile Digital Printing Forum, which will include an array of educating seminars that cover the latest digital textile printing trends and technologies. The forum will be held on day 2 of the fair, from 13:20 – 17:20 in hall 3, booth M12.

Furthermore, joining forces with Tmall Global, the largest cross border B2C online retail platform in China, the fair will host a series of seminars delivering the solutions and strategies for industry digitalisation during the afternoon of day 1. In addition, the well-received Furniture & Home Textile Direct Negotiation Event will return to provide an excellent opportunity for furniture companies and fabric brands to collaborate.

Additional health care and hygiene precautions will be in place

As trade fair co-organisers, Messe Frankfurt’s number one priority always remains the health and safety of fairgoers. To maintain a clean and hygienic environment for visitors and exhibitors to meet in, extra measures will be in practice at the fair. These include: real-name registration, onsite temperature checks, frequent sterilisation of public areas and distancing measures for forum / seminar audiences, amongst others.

Kelheim Fibres stops travels to and from China
Kelheim Fibres stops travels to and from China
31.01.2020

Kelheim Fibres stops travels to and from China

Because of the unpredictable risks arising from the Corona virus, the viscose speciality fibre manufacturer Kelheim Fibres has decided to stop all business trips to and from China for the time being.

“We recognise our responsibility towards our customers and our employees. Their health and safety come first”, explains Matthew North, Commercial Director of Kelheim Fibres.

Among other things, Kelheim Fibres manufactures hygiene fibres that are used, for example, in tampons and other personal care products. These highly sensitive products have been also taken into account in making this decision.

The Bavarians operate their own representative office in Shanghai and are supplier for many Chinese companies.

“We wish China and its population that the measures taken will lead to a rapid containment of the virus”, adds Matthew North.

Because of the unpredictable risks arising from the Corona virus, the viscose speciality fibre manufacturer Kelheim Fibres has decided to stop all business trips to and from China for the time being.

“We recognise our responsibility towards our customers and our employees. Their health and safety come first”, explains Matthew North, Commercial Director of Kelheim Fibres.

Among other things, Kelheim Fibres manufactures hygiene fibres that are used, for example, in tampons and other personal care products. These highly sensitive products have been also taken into account in making this decision.

The Bavarians operate their own representative office in Shanghai and are supplier for many Chinese companies.

“We wish China and its population that the measures taken will lead to a rapid containment of the virus”, adds Matthew North.

More information:
Kelheim Fibres
Source:

Kelheim-Fibres

Trevira awarded “Systematic Safety” seal of approval © BGHM: "Systematic Safety" seal of approval
27.08.2019

Trevira awarded “Systematic Safety” seal of approval

On 5 August 2019, Trevira received the “Systematic Safety” seal of approval from the German Social Accident Insurance Institution for the Raw Materials and Chemical Industry (Berufsgenossenschaft Rohstoffe und chemische Industrie, BG RCI). The award confirms that Trevira GmbH meets the requirements for systematic and effective occupational health and safety management through the company’s occupational health and safety management system, which helps optimise production workflows and demonstrates the value that Trevira GmbH places on the health and safety of its employees. The “Systematic Safety” award, valid for three years, also certifies that Trevira fully meets the requirements of industry standard ISO 45001:2018. The award was handed over to Trevira CEO Klaus Holz together with management representative Stefan Rauterkus.

On 5 August 2019, Trevira received the “Systematic Safety” seal of approval from the German Social Accident Insurance Institution for the Raw Materials and Chemical Industry (Berufsgenossenschaft Rohstoffe und chemische Industrie, BG RCI). The award confirms that Trevira GmbH meets the requirements for systematic and effective occupational health and safety management through the company’s occupational health and safety management system, which helps optimise production workflows and demonstrates the value that Trevira GmbH places on the health and safety of its employees. The “Systematic Safety” award, valid for three years, also certifies that Trevira fully meets the requirements of industry standard ISO 45001:2018. The award was handed over to Trevira CEO Klaus Holz together with management representative Stefan Rauterkus.

04.06.2019

Autoneum publishes Corporate Responsibility Report 2018

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

To further improve working conditions especially in production, measures were taken in all Business Groups in 2018 to enhance occupational health and safety and well-being in the workplace. A global employee satisfaction survey conducted in fall last year has confirmed the first positive effects of these measures.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2018 and is available at www.autoneum.com/corporateresponsibility/.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum Management AG

Huntsman Textile Effects Huntsman
Huntsman Textile Effects
20.07.2017

DMAI HONORS HUNTSMAN TEXTILE EFFECTS

Huntsman Textile Effects has been named winner in the 2016 Dyestuff Manufacturers Association of India (DMAI) Awards. Huntsman bagged two awards in recognition of its ‘Excellent performance in exports of Dyestuffs by a large scale unit and ‘Excellent performance in Pollution Control by a Large Scale Unit’. The accolade is presented for outstanding contribution in supporting environment, health and safety and sustainability for the textile industry.
The awards were presented at the 67th Annual General Meeting of DMAI in Mumbai. Huntsman Textile Effects received the awards based on criteria such as innovation, creativity, development and quality.
“We are honored to receive the prestigious awards and are grateful to be recognized again this year,” said Nipun Soni, Site Manager for Huntsman Textile Effects’ Baroda plant. “This acknowledgement reaffirms Huntsman Textile Effects’ focus on innovation and continuous improvement in safety and hazard controls to meet industry demands. We continue to draw on the expertise of our people and established processes in product stewardship.”

Huntsman Textile Effects has been named winner in the 2016 Dyestuff Manufacturers Association of India (DMAI) Awards. Huntsman bagged two awards in recognition of its ‘Excellent performance in exports of Dyestuffs by a large scale unit and ‘Excellent performance in Pollution Control by a Large Scale Unit’. The accolade is presented for outstanding contribution in supporting environment, health and safety and sustainability for the textile industry.
The awards were presented at the 67th Annual General Meeting of DMAI in Mumbai. Huntsman Textile Effects received the awards based on criteria such as innovation, creativity, development and quality.
“We are honored to receive the prestigious awards and are grateful to be recognized again this year,” said Nipun Soni, Site Manager for Huntsman Textile Effects’ Baroda plant. “This acknowledgement reaffirms Huntsman Textile Effects’ focus on innovation and continuous improvement in safety and hazard controls to meet industry demands. We continue to draw on the expertise of our people and established processes in product stewardship.”


Winners of the DMAI awards 2016 were determined by judging panel from chemical, pharma, dyes and dye intermediates manufacturing industries, among others. The DMAI ceremony was held in Mumbai on July 7, 2017.
This is the second consecutive year Huntsman Textile Effects has been presented DMAI Awards. Last year Huntsman was presented with awards for ‘Excellent Performance in Exports of Dyestuffs by Large Scale unit. Huntsman Textile Effects also won the award in the category for ‘Excellent Performance in Safety & Hazard’s Control by a Large Scale unit’.

Source:

Huntsman