From the Sector

Reset
168 results
21.04.2021

Lenzing: Outlook for current financial year raised

The Lenzing Group got off to a better-than-expected start to the financial year 2021, with preliminary EBITDA (earnings before interest, tax, depreciation and amortization) rising by 36.8 percent year-on-year to EUR 94.5 mn in the first quarter of 2021.

Despite the continuing high degree of volatility in the textile sector due to the COVID-19 pandemic, the Managing Board of the Lenzing Group raises its guidance for the 2021 financial year: The Lenzing Group expects the operating result to be at least at the level of the pre-crisis year 2019.

The results of the Lenzing Group for the 1st quarter of the current financial year will be published on Wednesday, May 05, 2021.

The Lenzing Group got off to a better-than-expected start to the financial year 2021, with preliminary EBITDA (earnings before interest, tax, depreciation and amortization) rising by 36.8 percent year-on-year to EUR 94.5 mn in the first quarter of 2021.

Despite the continuing high degree of volatility in the textile sector due to the COVID-19 pandemic, the Managing Board of the Lenzing Group raises its guidance for the 2021 financial year: The Lenzing Group expects the operating result to be at least at the level of the pre-crisis year 2019.

The results of the Lenzing Group for the 1st quarter of the current financial year will be published on Wednesday, May 05, 2021.

More information:
Lenzing AG Lenzing Group
Source:

Lenzing AG

Bunzl Distribution brings American antiviral technology to Mexico retailers
19.04.2021

Bunzl Distribution brings American antiviral technology to Mexico retailers

US-made Acteev Protect™ masks have embedded zinc ion technology which deactivates many viruses and eliminates bacteria

Bunzl Distribution, a leading supplier of packaging, disposable supplies, and cleaning and safety products, has signed on as the distributor in Mexico for Acteev Protect™ masks, made in the United States by polyamide manufacturer Ascend Performance Materials. A global distributor, Bunzl provides supplies to supermarkets, food processing plants, retailers and convenience stores in Mexico.

Bunzl will distribute the Acteev Protect Nonwoven Mask, a reusable general purpose mask that features powerful antiviral and antibacterial properties. Acteev technology embeds active zinc ions in a polymer matrix which destroys microbes, deactivates many viruses and eliminates bacteria and fungi.

US-made Acteev Protect™ masks have embedded zinc ion technology which deactivates many viruses and eliminates bacteria

Bunzl Distribution, a leading supplier of packaging, disposable supplies, and cleaning and safety products, has signed on as the distributor in Mexico for Acteev Protect™ masks, made in the United States by polyamide manufacturer Ascend Performance Materials. A global distributor, Bunzl provides supplies to supermarkets, food processing plants, retailers and convenience stores in Mexico.

Bunzl will distribute the Acteev Protect Nonwoven Mask, a reusable general purpose mask that features powerful antiviral and antibacterial properties. Acteev technology embeds active zinc ions in a polymer matrix which destroys microbes, deactivates many viruses and eliminates bacteria and fungi.

Recent testing on Acteev fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with greater than 99.9% efficacy. Ascend has submitted several masks designs to the U.S. Environmental Protection Agency and the U.S. Food and Drug Administration to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties in the United States.

Carlos Green, Director General of Bunzl de México, says the company is pleased to bring products featuring better safety and protection to the Mexico market. “Our customers are more focused than ever before on doing business safely, and Acteev masks offer an added level of protection in the workplace,” he said. “We’re excited to offer our customers this premium product that provides some of the best protection available.”

In addition to antiviral, antifungal and antibacterial protection, the washable, reusable masks are lightweight, breathable and odor-fighting, making them comfortable to wear during a long shift at work or for outdoor workout. “Workers in industrial settings, such as chemical and food processing plants, and convenience stores and other retail outlets deserve the right protection as they keep society and the economy moving in Mexico,” said Juan Toro, Ascend’s principal business development leader for Acteev in the Americas.

“We are proud to partner with Bunzl to help deliver a reusable mask that provides both antiviral properties as well as an opportunity reduce the number of masks consumed, saving the companies money.”
Acteev Protect shows promise for use beyond masks, according to Ascend. The technology was originally developed for workout wear, and now the company is working textile applications ranging from gloves to scrubs to high-end athleisure.

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

15.04.2021

Rieter Annual General Meeting 2021

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

More information:
Rieter spinning machinery spinning
Source:

Rieter Management AG

15.04.2021

Brodelec uses Direct-To-Fabric Printing with Kornit Digital Printing Technology

Brodelec chose to broaden its scope of activity by investing in the Kornit Presto S.

Dominique Willems, CEO at Brodelec, comments: "We had already seen a strong trend for personalized items, whether in the furniture or fashion sector, but since the beginning of the pandemic we have seen a strong growth in requests for small-scale personalization. And that's exactly where Kornit offers us a solution with incredible durability and quality, perfectly suited to our needs."

Brodelec chose to broaden its scope of activity by investing in the Kornit Presto S.

Dominique Willems, CEO at Brodelec, comments: "We had already seen a strong trend for personalized items, whether in the furniture or fashion sector, but since the beginning of the pandemic we have seen a strong growth in requests for small-scale personalization. And that's exactly where Kornit offers us a solution with incredible durability and quality, perfectly suited to our needs."

He continues: "The Kornit Presto S has allowed us to bring our latest project to life: the creation of a website entirely dedicated to ordering custom masks. Thanks to an online editor and our 200 models, our customers can order their masks in quantities ranging from 1 to several thousand pieces if necessary. As the Kornit Presto is free of certain technical and chemical constraints and has adapted perfectly to Brodelec's workflow system; we are currently printing more than 10,000 masks per week and can respond to requests within extremely short deadlines while guaranteeing quality and sharpness of detail. The masks meet the recommendations of the AFNOR and are designed with a fabric that filters out particles in the air by over 90%! Therefore, the designed and printed fabric masks are designated as category 1 and meet the UNS1 standards. They are distributed after testing for 60 washes."

14.04.2021

Resolutions adopted by the virtual Annual General Meeting of Lenzing AG

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

Source:

Lenzing AG

14.04.2021

PCMC adds virus-killing wet wipes machines to nonwovens lineup

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Source:

Barry-Wehmiller

Mimaki: 100 Percent Success in a Post Pandemic World (c) Mimaki
Mimaki UJV100-160
08.04.2021

Mimaki: 100 Percent Success in a Post Pandemic World

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

  • Productivity

The pandemic has served as a major catalyst for existing trends, and our growing appetite for everything on-demand has been given a huge COVID-related boost. For printers, a digital solution that offers premium productivity, quality and efficiency at an entry-level price point is sure to be an invaluable investment to meet evolving ‘on-demand demands’. Adding a digital production element to your business doesn’t need to be daunting, complicated or overpriced – the Mimaki ‘100 series’ truly lives up to the tagline ‘Expert Printing Made Easy’, offering an incredibly intuitive user experience for streamlined, ultra-efficient printing, high-quality output, and cost-effective implementation. The powerful and productive new textile printer in the ‘100 series’, the TS100-1600, is a shining example of equipment developed with the future of the market in mind – the textile industry is fast-paced and constantly innovating, and the printer you invest in needs to keep up with your creativity.

  • Diversity

2021 is set to be a period of transition. While that will mean navigating uncertainty, the ‘glass half full’ approach is to view the year ahead in terms of opportunities such as expanding your business, exploring alternative revenue streams, and taking the plunge into new markets. In the past, it may have felt as if the barriers to entry when it came to looking beyond your core business were too great. However, in a post-pandemic world, we need to break some of those barriers down and demonstrate that success with digital print is within reach if you invest in the right equipment. With the ‘100 series’ portfolio, Mimaki is acknowledging what print service providers need from their technology partners – the UJV100-160 and the JV100-160 are suitable for a wide range of applications that will allow you to easily and affordably diversify your offering, and with the TS100-1600 textile printer, it has never been easier to target growth in the thriving textile sector, even in challenging times.

  • Affordability

Affordability is one of the most significant barriers to entry into new markets. 2020 was a year of unprecedented economic challenges, so it’s more important than ever to be thinking about gaining a competitive edge, and the printers in the ‘100 series’ from Mimaki have been specifically formulated to help you ramp up productivity while keeping running costs low. Whether you want to take your first foray into digital print production, expand the services you offer or simply grow your customer base, cost can be a major sticking point, which is why supporting customers is Mimaki’s number one priority, designing the ‘100 series’ around your needs and continuing to listen to how those needs are developing. Making an investment in the JV100-160 in order to move into outdoor graphics; meeting demand for faster turnaround times by adding the instantly curable UJV100-160 to your production setup; or taking a leap into new revenue streams with the TS100-160 – it’s all ‘100’ percent accessible.

Source:

Martial Granet, Branch Manager, Mimaki France

25.03.2021

Autoneum Holding AG Annual General Meeting

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements 2020. In view of the net loss in the 2020 financial year, the Board of Directors proposed forgoing dividend payments, which was approved by a large majority of the shareholders. Hans-Peter Schwald, Chairman of the Board of Directors, said: “2020 was extremely challenging for the entire automobile industry and also for Autoneum. The pandemic-related drop in revenue has impacted profitability. Despite the net loss, Autoneum reached important financial improvements in 2020. We expect to return to profitability in 2021 and our aim to distribute at least 30% of the net profit attributable to Autoneum shareholders as dividends remains unchanged. The Board of Directors, the Group Executive Board and the Company as a whole are committed fully to ensuring that Autoneum continues to make significant operational and financial improvements.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider and Ferdinand Stutz were confirmed in office. Newly elected to the Board of Directors were Liane Hirner and Oliver Streuli.

With Liane Hirner and Oliver Streuli and the resignation of Peter Spuhler, who did not stand for reelection in order to be able to focus on managing Stadler Rail, the Board of Directors of Autoneum Holding Ltd has expanded from seven to eight members. Hans-Peter Schwald explained: “The expertise of Liane Hirner and Oliver Streuli in the areas of finance and corporate management is of great value to Autoneum. As the Board of Directors, we look forward to this enhancement to the Board and to working with both of them.”

Peter Spuhler has been an important driving force since the Company became independent, he played a major role in shaping Autoneum thanks to his entrepreneurial expertise and showed great commitment to the Company. The Board of Directors thanks him sincerely and wishes him continued success.

This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were re-elected to the Compensation Committee. Oliver Streuli was elected as a new member of this committee. In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Board of Directors and the Group Executive Board with a large majority.

The consultative vote on the 2020 remuneration report was approved by 83.4%. Due to the severe impact of the coronavirus pandemic on the Group’s business development, the members of the Board of Directors renounced half of their compensation for the 2020 financial year and, in order to  align their remuneration with shareholder interests, decided to receive it entirely in Autoneum shares. In addition, a waiver of salary amounting to 10% of the basic salary for a period of three months was agreed upon with the senior management as part of a reduction of personnel costs.

The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2022 financial year as well as the other proposals were also approved by a large majority.

Source:

Autoneum Management AG

IFFT/Interior Lifestyle Living set for a highly anticipated return in October 2021 (c) Messe Frankfurt
IFFT/Interior Lifestyle Living 2019
24.03.2021

IFFT/Interior Lifestyle Living set for a highly anticipated return in October 2021

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand
A newly introduced ETHICAL zone will help industry players explore the themes of sustainability and ecology, which are continuing to gain traction in the interior design market. The zone focuses on environmental protection, up-cycling, fair trade, products that support people with disabilities, organic products, local production for local consumption, and more. Furniture production from recycled forest materials will also be a focus of the zone, which will be promoted in the run up to the fair through sector-specific media channels. This will include dedicated promotional activities targeting ethically driven retailers and restaurants.
 
A variety of booth sizes to accommodate exhibitors’ needs
In response to requests from exhibitors who showcase smaller items, a new booth size has been added for 2021. Measuring 6.3 sqm (width 3m x depth 2.1m), the new booth option is one size smaller than the existing 9 sqm booth, adding more choice for exhibitors
 
Dedicated lifestyle themed zones
Proving popular amongst trade buyers during previous editions, ‘CREATIVE RESOURCE’ is a zone devoted to innovative interior materials, as well as parts and services for interior design and home remodelling. Products featured at the zone include wallpaper, floor coverings, paints and related materials. First introduced in 2012, the zone has grown in stature as the destination for the likes of manufacturers, architects, designers and developers to find inspiration.
 
The fair’s zoning encompasses a variety of different product categories and themes. This not only simplifies the sourcing process for trade buyers, but it also maximises business exposure for exhibitors. Day-to-day lifestyle products – both stylish and functional – will be displayed in the ‘HOME’, ‘ACCENT’ and ‘EVERYDAY’ zones with a focus on living spaces, accessories and household items respectively.
 
Moreover, catering to the world of convenience and home cuisine, an array of pragmatically-designed packaged food will be presented at 'FOODIST', while innovative dining items will be gathered at the ‘KITCHEN LIFE’ zone.
 
Highlighting high quality local craftsmanship, designs from Japanese artisanal artists with a modern touch will be located in the ‘JAPAN STYLE’ zone. The latest designs from highly acclaimed international brands will be displayed too, in the ‘MOVEMENT’ area, while work from up-and-coming young designers will appear at the ‘TALENTS’ and ‘NEXT’ zones.
 
About IFFT/Interior Lifestyle Living
IFFT/Interior Lifestyle Living is held annually in fall and is the sister fair of Interior Lifestyle Tokyo held in spring, which is based on Ambiente, Messe Frankfurt’s largest and most important international consumer goods fair, and Heimtextil, the biggest international home and contract textiles fair. With the synergetic effects of these leading global trade fairs in the high-end interior market, and with Messe Frankfurt’s global network, IFFT/Interior Lifestyle Living is a key platform for professionals, buyers, architects and those engaged in domestic and international contract business.

Baldwin receives three FlexoCleanerBrush™ orders in 30 days (c) Baldwin Technology
Baldwin’s three new FlexoCleanerBrush installations are located in Bevaria (Germany), Michigan (US) and Florida (US). The Florida order was secured in partnership with local agent Technoflex in South Carolina (US).
23.03.2021

Baldwin receives three FlexoCleanerBrush™ orders in 30 days

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

“With two of the recent orders, the customers had already installed the FlexoCleanerBrush in other locations. One of them reported as much as a 30 percent production capacity increase, thanks to the  installation,” said Lee Simmonds, Regional Sales Manager at Baldwin. “Both customers have experienced insufficient results with their original traversing cloth cleaning systems, which will now be removed and replaced with the full-width, stand-alone, automated FlexoCleanerBrush technology from Baldwin.”

Improving sustainability is one of the key drivers for investments in the corrugated printing industry. The FlexoCleanerBrush dramatically cuts water waste by cleaning plates more efficiently. In a recent independent study that was conducted to validate the capacity of the automated system, the FlexoCleanerBrush could fully clean and dry all printing plates in less than four minutes and pick hickeys in seconds.

Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plateracking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

Source:

Baldwin Technology

11.03.2021

Lenzing Group weathers the crisis year 2020 and remains strategically well on track

  • Successful implementation of measures to fight the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects progressing on schedule – financing contracts for the construction of the pulp plant in Brazil concluded according to plan
  • Lenzing expands its lead in sustainability and circular economy – first TENCEL™ branded carbon-zero fibers launched
  • Successful issuance of a EUR 500 mn hybrid bond further strengthens balance sheet structure
  • Lenzing expects recovery of the fiber market to continue in 2021 and an operating result on pre-crisis level

Lenzing – In 2020, the Lenzing Group successfully responded to the extremely difficult market environment due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The measures focused on protecting Lenzing’s employees and partners and on safeguarding its operations.

  • Successful implementation of measures to fight the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects progressing on schedule – financing contracts for the construction of the pulp plant in Brazil concluded according to plan
  • Lenzing expands its lead in sustainability and circular economy – first TENCEL™ branded carbon-zero fibers launched
  • Successful issuance of a EUR 500 mn hybrid bond further strengthens balance sheet structure
  • Lenzing expects recovery of the fiber market to continue in 2021 and an operating result on pre-crisis level

Lenzing – In 2020, the Lenzing Group successfully responded to the extremely difficult market environment due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The measures focused on protecting Lenzing’s employees and partners and on safeguarding its operations. Lenzing flexibly adjusted production volumes and was able to offer its customers the usual delivery service at any time. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs.

Please read the attached document for more information.

More information:
Lenzing Group Covid-19
Source:

Lenzing Aktiengesellschaft

Mostafiz Uddin Wins Coveted Drapers Sustainable Fashion Champion Award (c) Denim Expert Limited
Mostafiz Uddin
10.03.2021

Mostafiz Uddin Wins Coveted Drapers Sustainable Fashion Champion Award

  • Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

  • Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

Covid-19 has presented unforeseen challenges for fashion retailers and brands, but it has also given us all an opportunity to build back better. Forward-thinking fashion businesses know change is not optional, and are embracing their responsibilities and ability to make a difference.

Mostafiz Uddin has been recognised as the Sustainable Fashion Champion 2021 for setting examples in promoting sustainability during the Covid-19 pandemic which broke out worldwide in March last year.
Jill Geoghegan, Acting Editor of Drapers, said: “Despite the challenges thrown up by the Coronavirus pandemic, fashion brands and retailers increasingly recognise that sustainability is a business imperative.”  
“Many businesses continued to invest in cleaning up their supply chains and introducing new models of working, despite the unprecedented trading conditions.

“The Drapers Sustainable Fashion Awards highlight and celebrate these advancements, paving the way for a more responsible future for the industry.” Managing Director of Denim Expert Limited Mostafiz Uddin said: “In the pandemic, my factory Denim Expert Limited kept true to its commitment towards sustainability, despite an extremely difficult trading landscape.

“During the pandemic, I was vocal about the issue of buyer-supplier relationships and, in speaking out, I wanted to champion the cause of suppliers all over the world. Too often suppliers in garment supply chains do not have a voice because they fear that by speaking out, they will be treated unfavourably by brands.

“This was, of course, a risk on my own part but I like to think I stood up for what I think is right and ultimately, I believe progressive brands understood I was coming from a good place. Like them, all I want to see is a fair, ethical and sustainable industry where brands and retailers work in an environment of collaboration, not conflict.”

Mostafiz also had some special praise for H&M. He said: “It would have not been possible for me to support my workers during the pandemic, had my factory not received help from H&M during the unprecedented time. While Denim Expert suffered from huge orders cancellation and orders hold, H&M supported us by placing orders in the pandemic that saved thousands of lives and livelihoods. Therefore, I would like to dedicate this Award to H&M and its CEO Helena Helmersson.”

The judges of Drapers Sustainable Fashion Champion Award 2021 have been Kerry Bannigan, Founder, Conscious Fashion Campaign; Sarah Ditty, Global Policy Director, Fashion Revolution; Miriam Lahage, Founder, Aequip; Samata Pattinson, CEO, Red Carpet Green Dress; Caroline Rush, Chief Executive Officer, British Fashion Council; Lucy Shea, Group CEO, Futerra; Jane Shepherdson, Chairman, My Wardrobe HQ; and Dilys Williams, Director, Centre for Sustainable Fashion.

09.03.2021

Rieter Financial Year 2020

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Business Groups
Sales of the Business Group Machines & Systems amounted to CHF 295.8 million in 2020, which corresponds to a decrease of 24% compared to the previous year. Due to the low volume and taking into account the expenditure on the ongoing innovation program, the business group recorded a loss of CHF 72.4 million at the EBIT level. Order intake in the reporting year was CHF 363.9 million (-35% compared to the previous year).

The Business Group Components with sales of CHF 174.3 million (-24% compared to the previous year) achieved a profit of CHF 1.4 million at the EBIT level before restructuring charges. EBIT after restructuring charges was CHF -5.5 million. The order intake with CHF 169.1 million (-24% compared to the previous year) was just below sales.

The Business Group After Sales achieved sales of CHF 102.9 million (-27% compared to the previous year) and a positive EBIT of CHF 1.8 million. Order intake was CHF 107.2 million (-24% compared to the previous year). Over 60% of spinning mills were shut down in the second quarter of 2020, with a corresponding impact on the demand for spare parts.

Dividend
Due to the loss of CHF 89.8 million at the net profit level in the 2020 financial year, the Board of Directors proposes that shareholders waive the distribution of a dividend.

Outlook
Rieter expects the market recovery that began in the second half of 2020 to continue in 2021. The company expects an order intake in the first half of 2021 exceeding that of the previous half year (second half of 2020: CHF 389.5 million). Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nonetheless, as already announced, Rieter still anticipates that sales in the first half of 2021 will be below the break-even point. In connection with the high order backlog at the beginning of 2021, Rieter expects an operating profit for the full year 2021.

Source:

Rieter Management AG

03.03.2021

JEC WORLD 2021 postponed

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

Source:

JEC Group

08.02.2021

MoU: Lectra to acquire Gerber Technology

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

The proposed combination would occur at an opportune time for both companies and their customers. The current uncertain economic climate and unprecedented challenges that fashion, automotive and furniture companies are facing due to the COVID-19 pandemic make it more important than ever for them to transform, digitalize and optimize their operations.

For over 50 years, Gerber Technology has used its proprietary technologies and deep domain expertise to provide integrated software and automated hardware solutions to companies around the world, including over 100 Fortune 500 companies in 134 countries.

The strategic combination of Gerber Technology and Lectra will create a premier advanced technology partner, able to quickly meet changing customer needs and deliver even more value through seamlessly integrated solutions. Together, the two companies will have a large installed base of product development software and automated cutting solutions in operation, with a worldwide presence and a long list of prestigious customers.

Consolidating the two companies’ research and development capabilities will enable the combined company to accelerate development of Industry 4.0 technologies and help its expanded customer base seize the full potential of these innovations.
Integrating the technology of the two companies will endow them with the resources to anticipate and address rapidly changing market conditions.

Key transaction terms

Under the proposed acquisition, Lectra would acquire all outstanding shares of Gerber Technology on a cash-free debt-free basis for an upfront payment of 175 million euros – through a combination of cash and debt – plus 5 million newly issued Lectra shares to AIPCF VI LG Funding, LP (“AIPCF VI LG”), an affiliate of American Industrial Partners that is Gerber Technology’s sole shareholder. This would represent a total amount of about 300 million euros based on Lectra’s closing share price on February 5, 2021. No contingent consideration is contemplated.

Gerber Technology’s revenues was 165 million euros in 2020.

Thanks to the strong value creation deriving from significant synergies, Lectra expects the transaction to be accretive for shareholders from 2022.

Upon closing, Daniel Harari would own c. 14.6% of the Lectra shares and AIPCF VI LG would own c. 13.3%.

Lectra’s Board of Directors would welcome a director representing AIPCF VI LG.

Daniel Harari would continue to be the Chairman and Chief Executive Officer of Lectra. Gerber Technology Chief Executive Officer, Mohit Uberoi, would assume special advisor to Daniel Harari role until end-2021.

Lectra’s shareholders would be invited to vote on the issuance of the 5 million new Lectra shares reserved to AIPCF VI LG at a dedicated Extraordinary Shareholders’ Meeting which is currently expected to be held on April 30, 2021. A report containing additional information will be made available to the shareholders prior to the Extraordinary Shareholders’ Meeting.

Lazard is acting as exclusive financial advisor to Lectra, and Latham & Watkins as legal counsel to Lectra.

Goldman Sachs is acting as exclusive financial advisor to AIPCF VI LG, and Ropes & Gray LLP, Baker Botts LLP and Gide Loyrette Nouel A.A.R.P.I. as legal counsel to AIPCF VI LG.

2020 results, update on the 2020-2022 strategic roadmap and guidance for the coming years will be disclosed on February 10, 2021.

Lectra management will discuss the transaction, provide forward-looking guidance for the combined company upon closing of the transaction and answer questions from the financial community during the February 11, 2021 webcast Analyst Conference meeting in French starting at 8:30 am (CET - Paris).

 

Source:

Lectra - Headquarters

04.02.2021

DFD Januar/Februar 2021: Verlässliche Anlaufstelle für Einkäufer

Trotz des harten Lockdowns fanden in Düsseldorf in der vergangenen Woche die Kollektionssichtung und Order der Fall/Winter-Kollektion 2021 im Rahmen der Düsseldorf Fashion Days statt. Dank strenger Hygiene-Auflagen und starker Entzerrung des Orderaufkommens durch die Vergabe von Einzelterminen. In über 600 Showrooms platzierten Einkäufer aus ganz Deutschland ihre Order. Die Supreme Women&Men stellte temporäre Showroom-Flächen für ihre Partner zur Verfügung, während die Gallery FASHION & Shoes als rein digitales Format stattfand. Die Bilanz: Die Frequenz war erwartungsgemäß niedriger als vor der Pandemie, dennoch schätzt die Branche die Verlässlichkeit des Orderstandortes Düsseldorf sowie den persönlichen Austausch vor Ort.

Trotz des harten Lockdowns fanden in Düsseldorf in der vergangenen Woche die Kollektionssichtung und Order der Fall/Winter-Kollektion 2021 im Rahmen der Düsseldorf Fashion Days statt. Dank strenger Hygiene-Auflagen und starker Entzerrung des Orderaufkommens durch die Vergabe von Einzelterminen. In über 600 Showrooms platzierten Einkäufer aus ganz Deutschland ihre Order. Die Supreme Women&Men stellte temporäre Showroom-Flächen für ihre Partner zur Verfügung, während die Gallery FASHION & Shoes als rein digitales Format stattfand. Die Bilanz: Die Frequenz war erwartungsgemäß niedriger als vor der Pandemie, dennoch schätzt die Branche die Verlässlichkeit des Orderstandortes Düsseldorf sowie den persönlichen Austausch vor Ort.

„Dass die Düsseldorf Fashion Days stattfinden konnten, ist ein wichtiges Signal für die gesamte Branche und unterstreicht die Relevanz des Modestandortes. Der neue Name DFD kommt zudem beim Fachpublikum sehr gut an. Unter dem Dachbegriff DFD lassen sich das Fashion-Business sowie branchenübergreifende neue Konzepte perfekt vereinen. Diese Entwicklung fokussieren wir von städtischer Seite: Mit einem geplanten Festival-Konzept zur Sommerausgabe wird nicht nur das Orderbusiness gestärkt, sondern die gesamte Stadt inklusive Einzelhandel, Gastronomie, Kultur- und Eventbranche profitiert von der neuen Ausrichtung der Ordertage", erklärt Theresa Winkels, Leiterin der Wirtschaftsförderung Düsseldorf.

„Aufgrund der gegenwärtigen Situation sind wir in dieser Orderrunde ganz anders präsent: Digital und mit erweiterter Laufzeit vom 28. Januar bis 15. Februar 2021. Eine völlig neue Erfahrung, die wir jedoch sehr wertschätzen, weil wir uns damit neue Vertriebskanäle und eine erweiterte Präsenz für die Gallery-Formate geschaffen haben. Somit sind in Zukunft auch Hybridformate denkbar. Unser Wirkungskreis ist dadurch flexibler geworden. Mit ‚Gallery FASHION & Shoes digital‘ haben wir uns vollständig als Teil der DFD gefühlt, freuen uns aber dennoch auf die kommende Präsenzveranstaltung Gallery SHOES & Fashion vom 18. bis 20. April 2021 mit begleitendem Showroom Concept“, sagt Ulrike Kähler, Managing Director Igedo Company.

drapilux antimicrobial: Stark gegen Viren und Bakterien (c) drapilux
drapilux 191 mit der Zusatzfunktion drapilux antimicrobial
03.02.2021

drapilux antimicrobial: Stark gegen Viren und Bakterien

„Mehr als nur Stoff“, das ist das Credo von drapilux. Deshalb hat der Emsdettener Textilhersteller bereits vier intelligente Funktionen entwickelt, die zum Brandschutz (drapilux flammstop) beitragen, Bakterien abtöten (drapilux bioaktiv) und die Raumluft (drapilux air) oder Akustik (drapilux akustik) verbessern. Im Januar 2021 hat das Unternehmen die fünfte Zusatzfunktion präsentiert: drapilux antimicrobial, wirksam gegen Viren und Bakterien.

„Mehr als nur Stoff“, das ist das Credo von drapilux. Deshalb hat der Emsdettener Textilhersteller bereits vier intelligente Funktionen entwickelt, die zum Brandschutz (drapilux flammstop) beitragen, Bakterien abtöten (drapilux bioaktiv) und die Raumluft (drapilux air) oder Akustik (drapilux akustik) verbessern. Im Januar 2021 hat das Unternehmen die fünfte Zusatzfunktion präsentiert: drapilux antimicrobial, wirksam gegen Viren und Bakterien.

Antimikrobielle Ausrüstungen werden besonders seit Beginn der COVID-19-Pandemie stark nachgefragt. Bei drapilux begann die Arbeit an der neuen Funktion jedoch bereits weit vor dem Ausbruch.
„Wir arbeiten schon lange mit Krankenhäusern und Pflegeeinrichtungen zusammen. Um sie zu unterstützen, haben wir bereits die antibakterielle Funktion drapilux bioaktiv entwickelt. Die ursprüngliche Motivation für die neue Funktion war, diese Unterstützung durch eine Wirksamkeit gegen Viren zu erweitern“, sagt drapilux-Vertriebsleiter Hubert Reinermann. Da die aktuelle Pandemie von einem Virus ausgelöst wird, sei die Nachfrage nach Produkten, die bei der Bekämpfung von SARS-CoV-2 helfen, riesig. „Durch die Pandemie ist die Gesundheit von uns allen im öffentlichen Raum in den Fokus gerückt“, erläutert Reinermann. Er geht deswegen davon aus, dass antibakterielle oder antimikrobielle Textilien in Zukunft auch verstärkt im Hospitality-Sektor und Bürobereich zum Einsatz kommen. Darauf weise die seit März 2020 stark gestiegene Nachfrage nach drapilux bioaktiv-Stoffen hin.

Herausforderung Qualitätsstandard
Hubert Reinermann: „Das Textil soll sowohl mit der neuen Funktion ausgestattet als auch flammhemmend und waschbeständig sein. Bei jeder Produktentwicklung muss der drapilux-Qualitätsstandard erreicht und gewährleistet werden.“ Die Wirksamkeit von drapilux antimicrobial gegen Bakterien und Viren – das neuartige SARS-CoV-2 eingeschlossen – wurde in aufwendigen Testverfahren nach der Norm ISO 18184 durch ein unabhängiges, anerkanntes und nach ISO/IEC 17025:2017 akkreditiertes Prüfinstitut bestätigt.

Mit Silber und Fett gegen Mikroben
Grund für die hocheffiziente antimikrobielle Wirkung ist die Ausstattung der Textilien mit zwei sich ergänzenden Technologien am Ende der Produktionskette – positiv geladenen Silberionen sowie Liposomen, fetthaltigen Bläschen.*

Langlebige und effektive Wirkung
Auf diese Weise werden über 99,9 Prozent der geprüften behüllten Virenstämme – Coronavirus 229E sowie die Influenzaviren H1N1 und H3N2 – auf der Textiloberfläche schon in weniger als zwei Stunden ausgeschaltet.*

 

*Weitere Informationen finden Sie im Anhang.

Source:

schönknecht : kommunikation

01.02.2021

Epson: Gemeinsam nachhaltig erfolgreich

Epson hat sich als verantwortungsvoll agierendes Unternehmen für die Umsetzung der 17 globalen Nachhaltigkeitsziele der UN verpflichtet. Sie sind der Kompass für die Epson Agenda 2030, die alle Aktivitäten unter dieses Ziel stellt.

Für Epson in Deutschland, Österreich und der Schweiz stehen für das Jahr 2021 drei Strategien im Vordergrund:

Epson hat sich als verantwortungsvoll agierendes Unternehmen für die Umsetzung der 17 globalen Nachhaltigkeitsziele der UN verpflichtet. Sie sind der Kompass für die Epson Agenda 2030, die alle Aktivitäten unter dieses Ziel stellt.

Für Epson in Deutschland, Österreich und der Schweiz stehen für das Jahr 2021 drei Strategien im Vordergrund:

  1. Epsons Fachhandelstrategie bleibt indirekt! Das bedeutet und beinhaltet auch ein „digital go to market“.
  2. Nachhaltigkeit, Umweltbewusstsein und Maßnahmen im Kampf gegen den Klimawandel sind Megatrends in unserer Gesellschaft. Für uns ist das bei Weitem kein Trend. Epson ist seit Langem der Hersteller mit dem nachhaltigsten Portfolio im Druckermarkt. Daher heißt es für uns nicht nur Verantwortung zu zeigen, sondern auch alle unsere Fachhandelspartner in die Lage zu versetzen, mit nachhaltigen Lösungen Geld zu verdienen.
  3. Mit unserer Value Strategy stellen wir uns dieser Verpflichtung. Auf die Menschen kommt es an! Flexibilität, Miteinander, Identifikation und Vertrauen – im Unternehmen und Home-Office (60/40 Prozent) und in der Businesspartnerschaft.

Henning Ohlsson, Geschäftsführer Epson Deutschland GmbH, Direktor Sustainability, Epson Europa:
„[...] Eine zentrale Erkenntnis aus 2020 ist für mich: Jeder Einzelne hat entscheidenden Einfluss auf das große Ganze und auch auf das funktionierende Miteinander. Aufeinander zu achten, Verantwortung zu zeigen und sich den Konsequenzen des eigenen Handelns bewusst zu sein.

Das abgelaufene Jahr hat uns aber auch vor Augen geführt, dass der Klimawandel keine COVID 19-Pause macht. Das 2-Grad-Klimaziel, faire Arbeitsbedingungen und transparente Lieferketten sind Themen, die neben der Pandemie die Nachrichten des Jahres 2020 bestimmten. Als globaler Hersteller werden wir uns stets der Nachhaltigkeitsdebatte stellen – auch weit über das Jahr 2021 hinaus. Wir können, wollen und müssen Antworten liefern. Dazu gehört auch, dass wir in diesem Jahr die bestmöglichen Zertifizierungen für unsere Produktionsstätten erhalten haben und offiziell weltweit zu den obersten ein Prozent der nachhaltigsten Hersteller von IT-Equipment zählen.“*

Annette Harenberg, Head of Channel- / Consumer Sales:
„In Zeiten des Distanzunterrichts, Home-Office und insgesamt viel „Zuhause-Zeit“ waren und sind Drucker für daheim gefragt. Eine Herausforderung für unser Team war es, in Zeiten geschlossener Geschäfte die richtigen Vertriebswege zu finden und auszugestalten. Neben den naheliegenden digitalen Vertriebswegen, nutzten und nutzen wir Formate wie Click & Collect in den Märkten vor Ort. Auch das klassische Teleshopping für die Konsumenten konnten wir als Vertriebskanal erfolgreich ausbauen. Mit EcoTank sprechen wir preissensitive und umweltbewusste Kunden gleichermaßen an. Durch das starke und breit angelegte Portfolio können wir auch für sehr unterschiedliche Nutzungsszenarien den ‚richtigen‘ EcoTank anbieten. Großes Potenzial bieten unsere neuen Business Modelle, die die Reihe komplettieren und sich besonders für kleine Unternehmen eignen.“*

Frank Schenk, Head of Professional Graphics & Industrial Printing:
„Dieses Jahr mit seinen vielen Unwägbarkeiten hat uns im Industrial Printing-Bereich durch den Ausfall der Drupa Messe die Möglichkeit genommen, unsere vielen neuen Produkte der breiten Öffentlichkeit persönlich vorzustellen. Der Weg, unsere Kunden über Webinare und Live-Events zu erreichen, war eine unserer Herausforderungen. Wir haben sie angenommen und gut bewältigt. Heute können wir mit Stolz behaupten, dass wir der einzige Hersteller sind, der Produkte im Bereich Textil – ob direkter oder indirekter Druck – Signage, Foto, CAD und Proof anbietet – ob mit Resin-Tinte, Solvent-, Sublimations-, wasserbasierter- oder UV-Tinte. Ein breiteres Portfolio geht kaum noch. So konnten und können wir alle Bereiche zufriedenstellend bedienen und, wie im Textile- und Signage-Markt, sogar Wachstum verzeichnen.“*

Christoph Ruhnke, Head of Business Systems:
„Besonders im Bereich Labelling oder Etikettendruck bieten wir durch unser deutlich ausgebautes Portfolio jedem Unternehmen, vom kleinen Selbstvermarkter bis hin zu großen Industriepartnern, eine passende Lösung. Dank diesem breiten Portfolio ist es uns gelungen, die doch schwierige Situation des letzten Jahres, besonders im Hospitality-Segment, nicht nur auszugleichen, sondern sogar ein Wachstum zu erreichen. Auch das kommende Jahr sieht im Thema Fiskalisierung eine große Aufgabe, die es zu bewältigen gilt. Das Gesetz, das zu Beginn des Jahres 2020 in Kraft getreten ist und eine Übergangsphase bis zum März dieses Jahres gewährt, tritt nun in die entscheidende Phase. Dementsprechend erwarten wir besonders in den kommenden Monaten eine starke Nachfrage nach unseren Fiskalprodukten und -Lösungen.“*

 

*Weitere Information finden Sie im Anhang.

 

Source:

Epson Deutschland GmbH

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG