From the Sector

Reset
19 results
26.07.2022

adidas adjusts outlook for 2022: Declining revenues in Greater China expected

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

More information:
adidas financial year 2022
Source:

adidas AG

19.07.2022

Rieter starts sales process for the remaining land owned by Rieter

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level.

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

Source:

Rieter Holding AG

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

26.05.2022

Rieter anticipates losses in the first half of 2022

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

Rieter expects significantly higher sales in the first half of 2022 compared to the prior-year period (first half of 2021: CHF 400.5 million). Rieter anticipates a loss at the EBIT and net result level in the first half of 2022 (first half of 2021: EBIT CHF 9.0 million, net result: CHF 5.3 million).
The company is working intensively on the implementation of measures to minimize the impact of the supply chain bottlenecks, the COVID lockdown in China and the cost increases. The implemented price increases have a delayed effect, particularly in the machinery business. The integration of the automatic winding business is proceeding according to plan.

As soon as the situation in the sourcing markets has normalized, Rieter expects to benefit from the exceptionally high order backlog and the considerably improved market position as a result of the takeover of the automatic winding business as well as Accotex and Temco.
Rieter will provide a detailed report on the business results of the first half of 2022 in July 2022.

Source:

Rieter Management AG

14.10.2021

NCTO's Statement on Global Supply Chain Crisis

The National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement following President Biden’s remarks on the global supply chain crisis and stressed the importance of investing onshoring and nearshoring:

"We appreciate President Biden’s call to ensure we are building more resilient and reliable supply chains and to invest in our manufacturing industries here at home, in his address earlier today.

There is a reason we got into this mess and there is a reason we have a global supply chain crisis. Years of offshoring production in a race to the bottom –exacerbated by predatory trade practices that have undermined so many manufacturing industries--has led to a tipping point. In fact, it was not too long ago that nurses in New York City and beyond were wearing garbage bags as gowns as our overreliance on Chinese production chains exposed severe fragilities in keeping our health care workers safe during the height of the pandemic.

The National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement following President Biden’s remarks on the global supply chain crisis and stressed the importance of investing onshoring and nearshoring:

"We appreciate President Biden’s call to ensure we are building more resilient and reliable supply chains and to invest in our manufacturing industries here at home, in his address earlier today.

There is a reason we got into this mess and there is a reason we have a global supply chain crisis. Years of offshoring production in a race to the bottom –exacerbated by predatory trade practices that have undermined so many manufacturing industries--has led to a tipping point. In fact, it was not too long ago that nurses in New York City and beyond were wearing garbage bags as gowns as our overreliance on Chinese production chains exposed severe fragilities in keeping our health care workers safe during the height of the pandemic.

China’s virtually unlimited and unrealistic pricing power coupled with its subsidies and lack of enforceable environmental standards strips benefits and undermines policy objectives, and leaves us in an untenable situation of overreliance on a foreign supply chain for critical products and raw materials. This must change.

We must hold China accountable for predatory trade practices that have offshored our industries and our jobs. We must onshore and nearshore more textile and apparel production chains out of Asia to the U.S. and also to Western Hemisphere trade partners. This has a multitude of benefits to ensure more reliability in production and also has remarkable job benefits to U.S. manufacturers and our allied trading partners who adhere to higher labor and environmental standards. Further, it will help address the migration crisis and grow better paying jobs.

Now is the time to we need to unlock long-term commitments to source product from the USA and from our Hemispheric partners.  If we moved another 10 percent of global production to the U.S. and the Hemisphere, imagine the benefits that could be achieved.  Ensuring further verticalization and investment in all aspects of the industry, from raw materials to finished products, is good for the American economy and workers in the U.S. and in the region.

Our industry stands ready to help and provide the solutions to onshore and nearshore these production chains that benefit manufacturing workers, the U.S. economy, our Western Hemisphere allies, and consumers.   Further, onshoring and nearshoring these critical production chains has remarkable benefits for the environment and addresses the growing, systemic and alarming issues associated with climate change.  

It is critical that supply chains mitigate risks so that we are never in this situation again.  We appreciate President Biden recognizing the value of onshoring these critical production chains and stand ready to work with the administration in these efforts."

More information:
NCTO
Source:

NCTO

15.07.2021

Rieter: First half of 2021

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

Crisis management in the pandemic year of 2020 was aimed at protecting employees, fulfilling customer commitments, ensuring liquidity, and also strengthening the market position for the time after the pandemic as well as retaining the ability to benefit from the incipient market recovery.

The focus for 2021 remains on the implementation of this strategy. The measures for crisis management relating to the protection of employees and fulfilling customer commitments are still in effect in countries that continue to be affected by the pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

22.04.2021

Sanitized® T 99-19: 99.84 % protection against SARS CoV-2 on textiles

The antimicrobial protection of Sanitized® T 99-19 against the SARS-CoV-2 virus has been confirmed by independent labs in France (basis: ISO 18184:2019).

Textile and polymer products with Sanitized® antimicrobial treatment have been used in hygiene-sensitive areas for many years. For textiles, Sanitized® T 99-19 is a patented technology based on a silane-ammonia compound, a globally proven product. Its hygiene function is used in workwear and protective clothing for nursing staff, bed linen or mattresses in hotels, nursing care facilities and hospitals. Polyester goods for precisely these areas of application can now not only be antimicrobial, but also reliably protective against SARS CoV-2.

The antiviral efficacy (99.84 %) of the Sanitized® T 99-19 product has been officially confirmed by tests conducted by external labs.

The antimicrobial protection of Sanitized® T 99-19 against the SARS-CoV-2 virus has been confirmed by independent labs in France (basis: ISO 18184:2019).

Textile and polymer products with Sanitized® antimicrobial treatment have been used in hygiene-sensitive areas for many years. For textiles, Sanitized® T 99-19 is a patented technology based on a silane-ammonia compound, a globally proven product. Its hygiene function is used in workwear and protective clothing for nursing staff, bed linen or mattresses in hotels, nursing care facilities and hospitals. Polyester goods for precisely these areas of application can now not only be antimicrobial, but also reliably protective against SARS CoV-2.

The antiviral efficacy (99.84 %) of the Sanitized® T 99-19 product has been officially confirmed by tests conducted by external labs.

Tests on end products, which were additionally carried out by textile manufacturers, also prove the effectiveness of Sanitized® T 99-19 against SARS CoV-2. License partners praise this confidence-building benefit of the end products. SANITIZED license partners receive concrete support in terms of marketing and legal aspects (health claims).

Avoid legal pitfalls when claiming antiviral protection
Advice and support for customers in achieving optimal hygiene protection for their products are an integral part of SANITIZED services. A claim guide has therefore been developed especially for products that protect against COVID-19.
https://www.sanitized.com/de/protection-against-covid-19-which-antiviral-advertising-claimsare-legal-sanitized-explains/

Source:

SANITIZED AG

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics (c) Ascend
Acteev Protect™ yarns and fabrics
09.12.2020

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

The S Group offers complete supply chain management for apparel brands, including product development, manufacturing, logistics, quality assurance, packaging and order fulfillment. The company lists some of the world’s most recognized brands among its partners, including Lululemon, New Balance and Mack Weldon. Athleisure, performance, scrubs, and seamless products such as intimates, leggings, active wear, socks and gaiters will be available.

Gary Peck, CEO of The S Group, says his team is excited about the commercial potential of Acteev, especially given the new reality of global health concerns. “Garment design has primarily focused on functionality, sustainability and comfort,” said Peck. “The past year has made us all aware that safety can be a valuable feature of fabrics as well, and Acteev checks all those boxes.”

Acteev is Ascend’s patent-pending technology that embeds zinc ions in a polymer to create fibers with long-lasting antimicrobial properties. The result is a fabric that destroys odor-causing bacteria and fungi. Acteev technology is available in a wide range of textiles featuring the flexibility, softness and durability of nylon 6,6.

Recent testing on knit fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with 99.9% efficacy on contact1. Ascend is working with the U.S. Environmental Protection Agency, the U.S. Food and Drug Administration and other governmental agencies to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties.

DTV und EFIT Imagekampagne zum Outdoor-Trend (c) kalim / Adobe Stock
Die neue Imagewerbung für DTV- und EFIT-Betriebe
11.11.2020

DTV und EFIT Imagekampagne zum Outdoor-Trend

COVID 19 bleibt die Herausforderung: für die Betriebe im Wirtschaftsfeld Textilservice genauso wie für ihre Kunden. Bewusst setzen EFIT und DTV mit ihrer Winter-Kampagne optimistische Akzente und legen den Fokus auf Wintermode, die definitiv professionelle Pflege braucht. Die neuen Plakate sind gedruckt, die Downloads für alle Werbemittel online. Die Outdoor-Saison hat begonnen.

Kein Winter ohne Outdoormode!

„Auf Winter- und Outdoormode können unsere Kunden nicht verzichten, unabhängig von der Pandemie“, sagt EFIT-Geschäftsführer Daniel Dalkowski. „Und solange die Geschäfte geöffnet sind, haben wir die Chance, am Point of Sale aktiv zu werben. Das sollten wir jetzt mit Produktgruppen tun, die definitiv gefragt sind.“ Das neue Motiv zeige daher nicht nur ein Paar, das zuversichtlich nach vorne schaut, sondern auch genau die Warengruppen, die in der Textilreinigung definitiv besser gepflegt werden als in der heimischen Waschmaschine. Die Botschaft im griffigen Dreiklang wird auf Werbeflyern kurz und prägnant aufgegriffen und auf www.reinigen-lassen.com ausführlich erläutert.

COVID 19 bleibt die Herausforderung: für die Betriebe im Wirtschaftsfeld Textilservice genauso wie für ihre Kunden. Bewusst setzen EFIT und DTV mit ihrer Winter-Kampagne optimistische Akzente und legen den Fokus auf Wintermode, die definitiv professionelle Pflege braucht. Die neuen Plakate sind gedruckt, die Downloads für alle Werbemittel online. Die Outdoor-Saison hat begonnen.

Kein Winter ohne Outdoormode!

„Auf Winter- und Outdoormode können unsere Kunden nicht verzichten, unabhängig von der Pandemie“, sagt EFIT-Geschäftsführer Daniel Dalkowski. „Und solange die Geschäfte geöffnet sind, haben wir die Chance, am Point of Sale aktiv zu werben. Das sollten wir jetzt mit Produktgruppen tun, die definitiv gefragt sind.“ Das neue Motiv zeige daher nicht nur ein Paar, das zuversichtlich nach vorne schaut, sondern auch genau die Warengruppen, die in der Textilreinigung definitiv besser gepflegt werden als in der heimischen Waschmaschine. Die Botschaft im griffigen Dreiklang wird auf Werbeflyern kurz und prägnant aufgegriffen und auf www.reinigen-lassen.com ausführlich erläutert.

More information:
Branchenkampagne DTV EFIT Outdoor
Source:

DEUTSCHER TEXTILREINIGUNGS-VERBAND e.V.

21.08.2020

No Trevira CS joint booth at Heimtextil 2021

  • Successful concept to be continued in 2022

For three years now, the Trevira CS joint fair booth, where Trevira, its customers and partners present their new ideas within the framework of an innovative creative concept, has been an established and popular feature of Heimtextil. In 2021, the international trade fair for home and contract textiles is planned to take place from 12-15 January in Frankfurt/Main. However, as a result of the numerous uncertainties brought about by the coronavirus crisis, Trevira has decided that it will not take part next year.

  • Successful concept to be continued in 2022

For three years now, the Trevira CS joint fair booth, where Trevira, its customers and partners present their new ideas within the framework of an innovative creative concept, has been an established and popular feature of Heimtextil. In 2021, the international trade fair for home and contract textiles is planned to take place from 12-15 January in Frankfurt/Main. However, as a result of the numerous uncertainties brought about by the coronavirus crisis, Trevira has decided that it will not take part next year.

“Messe Frankfurt has shown us its comprehensive hygiene concept and plans and there is no question that their plans fully meet health and safety requirements,” explained Trevira CEO Klaus Holz. “But at Trevira, we are also very much aware of our responsibilities. Our joint booth concept is not only on an extensive scale, but it is also built around the idea of communication. This makes it even more important that we consider the potential risks involved and how they could impact our customers, co-exhibitors, visitors and staff.” Given the uncertainty as to how the situation might develop in the future, Trevira has decided it has no option but to withdraw from next year’s fair and postpone its participation in Heimtextil until 2022. This decision has been made in agreement with parent company Indorama Ventures PCL (Thailand), which has put stringent measures in place to keep its staff and customers safe. As a result, the concern and its subsidiaries are not currently participating in any trade fairs.

At the 2020 Heimtextil, Trevira exhibited together with around 30 of its major Trevira CS customers with a joint booth whose total floor area measured over 2,000 msq. The number of partners exhibiting alongside Trevira has increased steadily over the past three years, and the Trevira display, along with many of the newest flame retardant Trevira CS collections from its customers, has always been hugely popular at the fair, especially in Hall 4.2, where it has continually attracted a very high number of visitors. As a joint booth, it has benefited especially from the vibrant and positive discussions among visitors and exhibitors, together with the various events that accompany the display. Usually, these included a press conference and a party held at the new stand. Trevira’s Heimtextil presence in the past three years has strengthened and expanded the position of Trevira CS as the leading brand for flame retardant home textiles.

CEO Klaus Holz said, “As a regular exhibitor at Heimtextil for many years, we found this decision extremely difficult. We greatly regret that we will not be able to bring our joint booth to Heimtextil next year. However, we plan to return in 2022 with a fair booth offering visitors and partners the high quality they have come to expect of us, with brand new ideas and measures in place to ensure its success”.

Source:

Trevira GmbH

Archroma joins hands with Liberty Textile Mills Limited to produce life-saving PPE in Pakistan © Liberty Textile Mills Limited
Product lines of Liberty Textile Mills Limited.
07.08.2020

Archroma joins hands with Liberty Textile Mills Limited to produce life-saving PPE in Pakistan

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has joined hands with Liberty Textile Mill Limited (Liberty), a leading producer in healthcare textiles to produce high quality personal protective equipment (PPE).

Liberty will be benefitting from Archroma’s specialty solutions for hygiene protection, and well-established technical expertise in the area of medical textiles. Amidst the COVID-19 pandemic, the PPEs manufactured by Liberty are aimed at easing the current shortage of PPEs for medical professionals in Pakistan.

Liberty carries over two decades of experience in medical textiles and exporting them all over the world. Its partnering with Archroma is a major step forward towards creating enhanced protection in the current crisis. With its advanced scientific knowledge and technical expertise, Archroma provides a complete set of specialty chemicals required to produce PPEs, in particular in the area of antimicrobial and barrier coatings. The project will assist in enhancing medical standards in hospitals, isolation centers and intensive care units, in Pakistan and, very soon, worldwide.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has joined hands with Liberty Textile Mill Limited (Liberty), a leading producer in healthcare textiles to produce high quality personal protective equipment (PPE).

Liberty will be benefitting from Archroma’s specialty solutions for hygiene protection, and well-established technical expertise in the area of medical textiles. Amidst the COVID-19 pandemic, the PPEs manufactured by Liberty are aimed at easing the current shortage of PPEs for medical professionals in Pakistan.

Liberty carries over two decades of experience in medical textiles and exporting them all over the world. Its partnering with Archroma is a major step forward towards creating enhanced protection in the current crisis. With its advanced scientific knowledge and technical expertise, Archroma provides a complete set of specialty chemicals required to produce PPEs, in particular in the area of antimicrobial and barrier coatings. The project will assist in enhancing medical standards in hospitals, isolation centers and intensive care units, in Pakistan and, very soon, worldwide.

“By continuously challenging the status quo, we at Archroma are able to support our customers operating in or entering the area of medical textiles, with a holistic and expert approach to hygiene protection. With our collaboration with Liberty, we are so proud to be able to bring state-of-the art protection to health professionals and the general public,” comments Mujtaba Rahim, CEO of Archroma Pakistan.

“Liberty has a presence of more than five decades with high achieving accolades. Our processing units are fully equipped with latest equipment complying with international standards. We take this new partnership with Archroma as a start of building a strong relationship in the area of medical textiles. The COVID-19 pandemic has given a wake-up call to work extensively towards enhancing healthcare facilities. We are looking forward to new innovations in producing top-class PPEs,” adds Taimoor Mukaty, Director of Liberty Textile Mills Limited.

28.07.2020

Autoneum: Corona-related slump in revenue – bottom point overcome

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.


 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Source:

Autoneum Management AG

TMAS members ready to support digital textile transformations, post Covid-19 (c) TMAS
TMAS Secretary General Therese Premler-Andersson.
08.07.2020

TMAS members ready to support digital textile transformations, post Covid-19

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

Logo oerlikon
Oerlikon blickt positiv in die Zukunft
23.04.2020

Oerlikon Manmade Fibers segment looking positively towards the future during the coronavirus pandemic

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

Source:

Marketing, Corporate Communications
& Public Affairs

02.04.2020

NCTO Statement on Administration’s Reported Tariff Deferral

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

If the U.S. government makes tariff concessions during this crisis, it will be inviting a virtual tsunami of imports further devastating domestic manufacturing as it attempts to regain its footing.     

We urge the administration to abandon any moves to defer tariffs on finished products. It would only serve to allow importers to exploit the current crisis, while dealing a severe blow to U.S. manufacturing and its workers.  

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

  • U.S. employment in the textile supply chain was 585,240 in 2019. 
  • The value of shipments for U.S. textiles and apparel was $75.8 billion in 2019. 
  • U.S. exports of fiber, textiles and apparel were $29.1 billion in 2019. 
  • Capital expenditures for textile and apparel production totaled $2.5 billion in 2018, the last year for which data is available.
More information:
NCTO Coronavirus
Source:

NCTO

01.04.2020

Perlon® production is still running at all sites

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

In the current situation, the company is doing everything it can to fulfill its’ responsibility as an employer and also as a business partner. Therefore all hygiene measures at all our sites have been significantly increased so that our employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimize risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry.

The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high-quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high-quality cleaning system brushes.

More information:
Perlon Coronavirus
Source:

Perlon

Logo Perlon-Group
Perlon can continue with its production
30.03.2020

Perlon® production is still running at all sites in Germany, the USA and China

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

To manage the current situation responsibly, all hygiene measures at all our sites have been significantly increased so that the employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimise risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry
The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high quality cleaning system brushes.

More information:
corona virus Perlon filament
Source:

Perlon®