From the Sector

Reset
11 results
20.01.2023

Autoneum: Revenue growth in 2022

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

Revenue development in the regions
In local currencies, revenue of Business Group Europe increased by 2.7%, while production volumes of vehicle manufacturers decreased by 1.3%. The growth in revenue resulted from inflation compensation, while Autoneum's production volumes were significantly lower compared to the previous year. Business Group North America increased its revenue in local currencies by 11.0%. The number of vehicles produced increased by 9.7% year-on-year. Volume development at Autoneum’s North American plants clearly improved compared with 2021 due to the allocation of semiconductors to the vehicle models supplied by Autoneum. Revenue of Business Group Asia declined by 2.7% in local currencies, and thus was significantly below the market (+7.7%). Autoneum's production facilities in its main market China are located in regions that were hit particularly hard by the COVID-related lockdowns. Growth in China was also driven by Chinese vehicle manufacturers, with whom Autoneum generated only little revenue last year.
Business Group SAMEA (South America, Middle East and Africa) achieved hyperinflation-adjusted revenue growth in local currencies of 65.2% year-on-year. This increase was mainly due to inflation compensation and in terms of volume slightly outperformed the market, which grew by 7.5%.

Due to significantly lower production volumes in Autoneum's regions Europe and Asia of around CHF 90 million compared to the half-year estimate and further increases in energy costs in the second half of the year, Autoneum expects the full-year 2022 result to be at the lower end of the guidance published on June 15, 2022.

The full year-end financial statements and the Annual Report 2022 will be presented at the Media Conference on March 1, 2023.

Source:

Autoneum Management AG

Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

24.02.2022

NCTO: Deputy U.S. Trade Representative Sarah Bianchi visits Shawmut Corporation

Shawmut Corporation hosted Deputy United States Trade Representative Sarah Bianchi at the company’s headquarters and state-of-the-art manufacturing facility in West Bridgewater, Mass., as part of the ambassador’s inaugural visit to textile manufacturing facilities in the New England area.

Ambassador Bianchi’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. Shawmut Corporation is part of the broader U.S. textile industry that has been at the forefront of a domestic production chain that has collectively manufactured over one billion personal protective equipment (PPE) items during the COVID-19 pandemic.

Shawmut Corporation hosted Deputy United States Trade Representative Sarah Bianchi at the company’s headquarters and state-of-the-art manufacturing facility in West Bridgewater, Mass., as part of the ambassador’s inaugural visit to textile manufacturing facilities in the New England area.

Ambassador Bianchi’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. Shawmut Corporation is part of the broader U.S. textile industry that has been at the forefront of a domestic production chain that has collectively manufactured over one billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The ambassador’s visit to Shawmut included a tour of the company’s manufacturing facility and a roundtable discussion highlighting the critical need for policies supporting a domestic supply chain and the innovative nature of the modern textile industry and its important contribution to the U.S. economy. Shawmut, a fourth-generation, family-run global advanced materials and textile manufacturer, is a global leader in automotive textile composites, innovative technical fabrics and custom laminating services, employing more than 700 employees worldwide with 10 global manufacturing plants and seven commercial offices. The company has also contributed greatly to U.S. PPE efforts, investing $20 million in a new state-of-the-art facility, which can produce up to 180 million NIOSH-approved N95 respirators and other PPE annually and created hundreds of new local jobs.

Ambassador Bianchi said, “Today’s tour of Shawmut’s manufacturing facilities and the roundtable discussion with textile industry executives was an invaluable opportunity for me to see innovative U.S. textile manufacturing first-hand, to learn more about the challenges that U.S. textile manufacturing faces, and to explore ways in which the Administration and industry can cooperate to support a worker-centric trade policy.”

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in a roundtable with the ambassador at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington, such as the importance of Buy American and Berry Amendment government procurement policies, maintaining strong rules of origins in free trade agreements and the need to address larger systemic trade issues with China.

14.04.2021

PCMC adds virus-killing wet wipes machines to nonwovens lineup

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Source:

Barry-Wehmiller

30.10.2020

SGL Carbon SE: Board of Management resolves restructuring program

An impairment charge has become necessary based on the current status of the new 5 year plan.

(Market Abuse Regulation N° 596/2014)
•    Impairment loss amounting to €80-100 million in the fourth quarter 2020 in the business unit CFM
•    Restructuring program resolved with savings target of more than €100 million until 2023
•    Guidance 2020 for Group sales and operating recurring Group EBIT confirmed
•    Guidance 2020 for net result reduced to minus €130-150 million

An impairment charge has become necessary based on the current status of the new 5 year plan.

(Market Abuse Regulation N° 596/2014)
•    Impairment loss amounting to €80-100 million in the fourth quarter 2020 in the business unit CFM
•    Restructuring program resolved with savings target of more than €100 million until 2023
•    Guidance 2020 for Group sales and operating recurring Group EBIT confirmed
•    Guidance 2020 for net result reduced to minus €130-150 million

In the current status of the 5 year plan, which is at present under preparation, significant deviations have already become apparent today, particularly in the market segments Automotive, Aerospace and Wind Energy in the business unit Composites – Fibers & Materials (CFM). Partially also due to the pandemic, Automotive and Aerospace is developing slower than anticipated in the last 5 year plan. In contrast, business with Wind Energy is growing much stronger than previously planned. These changes in the product mix lead to lower mid-term earnings at CFM compared to the prior 5 year plan. Following these deviations from the last 5 year plan, an event-driven impairment test was undertaken. This results in a non-cash impairment charge amounting to €80-100 million, which will be recorded in the fourth quarter 2020.

The Board of Management of SGL Carbon SE today also resolved the implementation of a restructuring program, with which the Company is targeting savings of more than €100 million until 2023 (compared to the base year 2019). These savings consist of a planned socially compatible reduction in personnel of more than 500 employees and substantial reduction in indirect spend, particularly in the areas of travel, consulting and external services. Costs of approximately €40 million are anticipated for the implementation of this restructuring program. A little more than half of this is expected to be recorded as expenses in the fourth quarter 2020, while the associated cash outflows are mainly forecasted for 2021.

This requires a partial adjustment of the guidance for 2020. The solid operational development in the third quarter 2020 with Group sales between €220 and €230 million and operating recurring EBIT1 between €13 and €15 million (plus approximately €9 million positive one-time effects) is within the framework of our expectations for the full year 2020. However, the Group net result is likely to develop below the prior year level of minus €90 million and reach approximately between minus €130 and €150 million due to the restructuring provisions as well as the impairment charge (prior guidance: improvement to a negative low double-digit million € amount).

With liquidity of €167 million as of September 30, 2020 (compared to €137 million at year-end 2019) and further cash inflows in the fourth quarter 2020 from successfully implemented additional funding measures, the Company’s position is solid. This liquidity is more than sufficient for the payment of the purchase price for SGL Composites USA in the amount of USD 62 million at the end of 2020 as well as the restructuring-related cash outflows expected mainly in 2021. The Company continues to have access to the revolving credit facility (RCF) in the amount of €175 million, which remains undrawn.

The quarterly statement as of September 30, 2020 will be published on November 12, 2020 as scheduled. Further details on the new 5 year plan as well as the guidance on the fiscal year 2021 will be presented with the publication of the Annual Report 2020 on March 25, 2021.

*The use of KPIs in this notification is aligned to the annual report 2019 and the interim report for the first half year 2020. There were no changes to the scope of consolidation or to valuation methods compared to the previous guidance.

More information:
SGL Carbon Composites Fibers
Source:

SGL CARBON SE

Baldwin installs six precision spray systems in 60 days for textile manufacturers (c) Baldwin Technology Company Inc.
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied.
22.09.2020

Baldwin: six precision spray systems in 60 days for textile manufacturers

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Source:

Baldwin Technology Company Inc.

28.07.2020

Autoneum: Corona-related slump in revenue – bottom point overcome

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.


 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Source:

Autoneum Management AG

30.06.2020

Autoneum realigns financing sustainably

Due to the COVID 19 crisis and its significant impact on the automotive industry and Autoneum's course of business, the Company and a bank consortium have amended the existing long-term credit agreement in the amount of CHF 350 million, amongst others with regard to the financial covenants.

At the same time, the two major shareholders Michael Pieper and Peter Spuhler have  agreed to extend the term of the subordinated loans of CHF 20 million each, granted in December 2019, subject to the financial performance of Autoneum Group and aligned with the credit agreement with the bank syndicate. As a result, Autoneum's liquidity and long-term financing continue to be secured on a sustainable basis.

Due to the COVID 19 crisis and its significant impact on the automotive industry and Autoneum's course of business, the Company and a bank consortium have amended the existing long-term credit agreement in the amount of CHF 350 million, amongst others with regard to the financial covenants.

At the same time, the two major shareholders Michael Pieper and Peter Spuhler have  agreed to extend the term of the subordinated loans of CHF 20 million each, granted in December 2019, subject to the financial performance of Autoneum Group and aligned with the credit agreement with the bank syndicate. As a result, Autoneum's liquidity and long-term financing continue to be secured on a sustainable basis.

More information:
Covid-19 Autoneum
Source:

Autoneum Management AG

01.04.2020

Perlon® production is still running at all sites

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

In the current situation, the company is doing everything it can to fulfill its’ responsibility as an employer and also as a business partner. Therefore all hygiene measures at all our sites have been significantly increased so that our employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimize risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry.

The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high-quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high-quality cleaning system brushes.

More information:
Perlon Coronavirus
Source:

Perlon

Logo Perlon-Group
Perlon can continue with its production
30.03.2020

Perlon® production is still running at all sites in Germany, the USA and China

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

Perlon®, a Serafin Group company, is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of Covid-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity. In particular in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

To manage the current situation responsibly, all hygiene measures at all our sites have been significantly increased so that the employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimise risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry
The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high quality cleaning system brushes.

More information:
corona virus Perlon filament
Source:

Perlon®

23.03.2020

autoneum: Coronavirus pandemic massively impacts course of business

The corona pandemic has a significant impact on the global economy and thus also on the global automotive industry. The temporary plant closures at almost all customers in all regions will result in a revenue decline at Autoneum in the current year, the extent of which cannot yet be estimated.

In addition to the ongoing cost-saving programs, Autoneum has therefore decided on a comprehensive set of measures to further increase the flexibility of personnel and material expenses. This includes staff adjustments, e.g. by reducing the number of temporary employees in plants. In addition, short-time work at the Swiss sites, the Group’s headquarters in Winterthur and at the Sevelen plant (canton of Sankt Gallen), as well as short-time work in some other European countries and temporary closures of production facilities in various regions in line with those of customers are being implemented. With these measures, Autoneum is at the same time making its contribution to protecting the workforce, breaking chains of infection and containing the spread of this pandemic.

The corona pandemic has a significant impact on the global economy and thus also on the global automotive industry. The temporary plant closures at almost all customers in all regions will result in a revenue decline at Autoneum in the current year, the extent of which cannot yet be estimated.

In addition to the ongoing cost-saving programs, Autoneum has therefore decided on a comprehensive set of measures to further increase the flexibility of personnel and material expenses. This includes staff adjustments, e.g. by reducing the number of temporary employees in plants. In addition, short-time work at the Swiss sites, the Group’s headquarters in Winterthur and at the Sevelen plant (canton of Sankt Gallen), as well as short-time work in some other European countries and temporary closures of production facilities in various regions in line with those of customers are being implemented. With these measures, Autoneum is at the same time making its contribution to protecting the workforce, breaking chains of infection and containing the spread of this pandemic.

Despite the above-mentioned countermeasures and in light of the advancing spread of the coronavirus, Autoneum does not expect to achieve its targets for the business year 2020. Due to the considerable uncertainties regarding the course and duration of the pandemic, no updated outlook is provided for 2020 for the time being.

Source:

Autoneum Management AG