From the Sector

Reset
54 results
BVMed Vorstand Foto: BVMed | Bundesverband Medizintechnologie e.V.
BVMed Vorstand
11.04.2024

BVMed: Mark Jalaß folgt als Vorsitzender auf Dr. Meinrad Lugan

Mark Jalaß (58) von Lohmann & Rauscher ist auf der Mitgliederversammlung des Bundesverbandes Medizintechnologie (BVMed) am 11. April 2024 in Berlin zum neuen Vorstandsvorsitzenden gewählt worden. Er folgt auf Dr. Meinrad Lugan, der nach 17 Jahren die Führung des deutschen Medizintechnik-Verbandes übergibt. Mark Jalaß ist Direktor Marketing und Vertrieb ambulanter Bereich und Industrie bei Lohmann & Rauscher. Zu Stellvertretenden Vorsitzenden wurden Dorothee Stamm von Medtronic und Marc Michel von Peter Brehm gewählt.

Mark Jalaß ist seit 2018 im BVMed-Vorstand und seit 2008 als Sprecher verschiedener BVMed-Arbeitskreise aktiv. Seine berufliche Karriere begann der Industriekaufmann und systemischer Business Coach als Produktmanager und Außendienstmitarbeiter bei Schülke & Mayr. Danach war er bei Beiersdorf, BSN Medical und Coloplast tätig, bevor er 2009 zu Lohmann & Rauscher wechselte. Dort ist er seit 2017 Direktor Marketing und Vertrieb ambulanter Bereich und Industrie, Mitglied im globalen Vertriebs- und Marketingsteuerungsteam sowie seit 2020 Leiter von drei Handelstochterunternehmen von Lohmann & Rauscher in Deutschland.

Mark Jalaß (58) von Lohmann & Rauscher ist auf der Mitgliederversammlung des Bundesverbandes Medizintechnologie (BVMed) am 11. April 2024 in Berlin zum neuen Vorstandsvorsitzenden gewählt worden. Er folgt auf Dr. Meinrad Lugan, der nach 17 Jahren die Führung des deutschen Medizintechnik-Verbandes übergibt. Mark Jalaß ist Direktor Marketing und Vertrieb ambulanter Bereich und Industrie bei Lohmann & Rauscher. Zu Stellvertretenden Vorsitzenden wurden Dorothee Stamm von Medtronic und Marc Michel von Peter Brehm gewählt.

Mark Jalaß ist seit 2018 im BVMed-Vorstand und seit 2008 als Sprecher verschiedener BVMed-Arbeitskreise aktiv. Seine berufliche Karriere begann der Industriekaufmann und systemischer Business Coach als Produktmanager und Außendienstmitarbeiter bei Schülke & Mayr. Danach war er bei Beiersdorf, BSN Medical und Coloplast tätig, bevor er 2009 zu Lohmann & Rauscher wechselte. Dort ist er seit 2017 Direktor Marketing und Vertrieb ambulanter Bereich und Industrie, Mitglied im globalen Vertriebs- und Marketingsteuerungsteam sowie seit 2020 Leiter von drei Handelstochterunternehmen von Lohmann & Rauscher in Deutschland.

Zu weiteren Vorstandsmitgliedern neben Mark Jalaß, Dorothee Stamm und Marc Michel wurden gewählt: Dr. Chima Abuba von GHD, Alexia Anapliotis von Merete, Stefan Geiselbrechtinger von OPED, Manuela Hoffmann-Lücke von PAUL HARTMANN, Frank Kirchner von B. Braun und Dr. med Hans-Christian Wirtz von Johnson & Johnson. Außerdem ist BVMed-Geschäftsführer Dr. Marc-Pierre Möll Mitglied des Vorstands.

Ausgeschieden aus dem BVMed-Vorstand sind neben Dr. Meinrad Lugan auch der bisherige Stellvertretende Vorsitzende Dr. Manfred Elff (Biotronik) sowie Manfred Hinz (3M) und Kristof Boogaerts (Johnson & Johnson Medical).

Dr. Meinrad Lugan und Dr. Manfred Elff wurden von den BVMed-Mitgliedern auf der Mitgliederversammlung aufgrund ihrer langjährigen Verdienste zu Ehrenmitgliedern des Vorstands gewählt.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

INDA Lifetime Award 2024 INDA
09.04.2024

INDA Honors Three Nonwoven Industry Professionals with Lifetime Awards

INDA, the Association of the Nonwoven Fabrics Industry, announced three recipients for the INDA Lifetime Service Award and Lifetime Technical Achievement Awards. David Powling, Paul Latten, and Arnold Wilkie are being recognized for their key contributions to the advancement of the nonwovens industry and INDA.

David Powling and Paul Latten will receive their awards at the World of Wipes® (WOW) International Conference, June 18th beginning at 4:30 pm
Arnold Wilkie will receive his award at the RISE® Conference, October 1st at 4:30 pm.

The Award recipients are:

INDA, the Association of the Nonwoven Fabrics Industry, announced three recipients for the INDA Lifetime Service Award and Lifetime Technical Achievement Awards. David Powling, Paul Latten, and Arnold Wilkie are being recognized for their key contributions to the advancement of the nonwovens industry and INDA.

David Powling and Paul Latten will receive their awards at the World of Wipes® (WOW) International Conference, June 18th beginning at 4:30 pm
Arnold Wilkie will receive his award at the RISE® Conference, October 1st at 4:30 pm.

The Award recipients are:

David Powling
David Powling has worked for Kimberly-Clark Corporation for nearly 25 years and has been a contributor to the Wipes Task Force and Technical Committees at INDA and EDANA for over 15 years. Powling served as Chairman of the INDA Wipes Task Force from 2009-2013. His work on these committees include developing the first and second edition of the Flushability Guidance Document (GD) and he was later instrumental in the roll out of the third and fourth edition GDs. Throughout this time, Powling coordinated activities with Kimberly-Clark Corporation to provide critical supporting data, as these flushability test protocols were developed.

Powling has been actively involved in collection studies where he was key in framing the work packages of those studies, collating and analyzing the data, and drafting reports. These collection studies include: Moraga, CA (advisor); Maine – Part #1 and Part #2 (hands-on); Jacksonville (hands-on); and the Northern and Southern California studies in 2023, which combined, was the largest study to date. Powling led the charge in the California study and was personally involved in identifying 1,745 samples.

Powling has been a key technical contributor to the INDA Government Relation efforts that has resulted in labelling regulations in multiple U.S. states. He has also been an active participant in efforts to develop an ISO standard for flushable products.  In this effort, he was a test method sub-team leader during the preparation of the proposed ISO standard responsible for organizing appendices of existing flushability methodologies. Additionally, Powling has been awarded, or has pending, 25+ U.S. patents, including many covering the development of dispersible wet wipes.

Paul Latten
Paul Latten has been an active member of the nonwoven and fiber industries for over 35 years. Most recently he has led innovation at Southeast Nonwovens, commercializing more than 75 new nonwoven products per year. Prior to joining Southeast Nonwovens, Latten held senior leadership positions with Basofil, Consolidated Fibers, Invista, and KoSa (and Trevira and Hoechst Celanese precursors to KoSa.)

Latten has a successful career of reinvigorating company R&D efforts by instilling a focus on customer-centric innovation. He is an inventor of record for a number of patents and pending applications. Latten has given numerous presentations on innovative nonwoven materials, at events such as INDA’s World of Wipes® (WOW) International Conference, RISE® (Research, Innovation & Science for Engineered Fabrics), the VISION International Conference, and the Converting and Bonding (CAB) Conference.

His recent innovations have been diverse in scope and include nonwovens for use in hydrogen fuel cells, moisture detection media, proprietary wipe designs, and natural fiber-based packaging. Aside from new fiber and nonwoven products, Latten has championed process innovation that has resulted in tangible output gains that broadened the market opportunity for his current and prior companies.

Latten’s portfolio of innovations has spanned across the nonwoven markets, often involving wetlaid and drylaid nonwovens. These include materials for moisture detection, synthetic papers, fuel cell cathodes, protective covers for treats, melamine nonwovens for surface treatment, and the development of binder fibers. His work also touched upon disposable hygiene applications entailing dry-laid web containing hollow synthetic fibers to improve absorbent core fluid uptake.

Latten has been a board member of INDA for multiple terms and served as Chairman in 2008-2010. Additionally, he has contributed to many INDA conference planning committees, helping drive the success of these events.

Arnold Wilkie
Arnold Wilkie has a distinguished career in advancing yarn, fiber, and nonwoven technologies since 1970. Since 1988, he has been President and Owner of Hills, Inc. where he has sustained their innovative culture. Wilkie has over 40 patents and applications covering yarns, bicomponent fibers, ultra-fine fibers, nanofibers, dissolvable filaments, meltblown nonwovens, and polymer processing innovations. He established Hills as a leading innovator in bicomponent fiber nonwovens and in the equipment to produce these materials. During Wilkie’s time leading Hills, their pilot capabilities have become well-known and highly regarded for enabling material innovations.

Many of his patents pertain to the development of equipment solutions that enable the production of complex bi- and multi-component fiber structures. These solutions include the method of forming a continuous filament spun-laid web, the method and apparatus for producing polymer fibers and fabrics including multiple polymer components, the method and apparatus for controlling airflow in a fiber extrusion system, and controlling the dissolution of dissolvable polymer components in plural component fibers.

Arnold Wilkie, President, Hills, Inc., earned his bachelor’s degree in Mechanical Engineering from the University of Tennessee and an MBA from the University of West Florida. He is a licensed Professional Engineer in Florida, and has been engaged in the synthetic fibers industry since 1970. The first 17 years were with the Monsanto Company, where he held positions in Fiber Process Engineering, Fiber Product R&D, and Product Management. Since 1988, he has been a majority Owner and President of Hills, Inc., a 52-year-old company located in West Melbourne, Florida, specializing in the development, manufacture, and supply of advanced custom fiber extrusion equipment. Wilkie has been involved with and supported The Nonwovens Institute, since its founding in 1991 as the Nonwovens Cooperative Research Center (NCRC), with Hills joining as a Member in 2001

More information:
INDA lifetime achievement
Source:

INDA

Professor Dr.-Ing. Markus Milwich Photo: DITF
Professor Dr.-Ing. Markus Milwich.
19.03.2024

Markus Milwich represents "Lightweight Design Agency for Baden-Württemberg"

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

The use of lightweight materials in combination with new production technologies will significantly reduce energy consumption in transportation, the manufacturing industry and the construction sector. Resources can be saved through the use of new materials. As a cross-functional technology, lightweight construction covers entire value chain from production and use to recycling and reuse.

The aim of the state government is to establish Baden-Württemberg as a leading provider of innovative lightweight construction technologies in order to strengthen the local economy and secure high-quality jobs.

Among others, the "Lightweight Construction Alliance Baden-Württemberg" will continue the nationally renowned "Lightweight Construction Day", which acts as an important source of inspiration for a wide range of lightweight construction topics among business and scientific community.

Professor Milwich, an expert with many years of experience and an excellent network beyond the State's borders, has been recruited for this task. In his role, Milwich also represents the state of Baden-Württemberg on the Strategy Advisory Board of the Lightweight Construction Initiative of the Federal Ministry for Economic Affairs and Climate Action, which supports the cross functional-technology and efficient transfer of knowledge between the various nationwide players in lightweight construction and serves as a central point of contact for entrepreneurs nationwide for all relevant questions.

From 2005 to 2020, Professor Milwich headed the Composite Technology research at the DITF, which was integrated into the Competence Center Polymers and Fiber Composites in 2020. He is also an honorary professor at Reutlingen University, where he teaches hybrid materials and composites. "Lightweight design is an essential aspect for sustainability, environmental and resource conservation. I always showcase this in research and teaching and now also as a representative of the lightweight construction community in Baden-Württemberg," emphasizes Professor Milwich.

Source:

Deutsche Institute für Textil- und Faserforschung

KARL MAYER TURKEY appoints General Manager (c) KARL MAYER GROUP
Toros Greenhalgh, General Manager of KARL MAYER TURKEY
02.02.2024

KARL MAYER TURKEY appoints General Manager

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

More information:
Karl Mayer Manager Turkey
Source:

KARL MAYER GROUP

BVMed-Geschäftsführer Dr. Marc-Pierre Möll in MedTech Europe-Vorstand berufen (c) BVMed
Dr. Marc-Pierre Möll
11.12.2023

BVMed-Geschäftsführer Dr. Marc-Pierre Möll in MedTech Europe-Vorstand berufen

| BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll ist erstmals in den Vorstand des europäischen Medizintechnik-Dachverbandes MedTech Europe berufen worden. Der BVMed baut damit nach der Eröffnung eines eigenen Brüsseler Büros im November 2022 sein europapolitisches Engagement weiter aus. Der 21-köpfige neue MedTech Europe-Vorstand ist für drei Jahre bis Dezember 2026 gewählt.

Zentrale Herausforderungen der MedTech-Branche auf EU-Ebene sind nach Ansicht des BVMed: Eine patient:innen-zentrierte Versorgung mit Medizintechnologien gewährleisten, eine resiliente Gesundheitsversorgung und strategische Autonomie sicherstellen, die Weichen für eine besser digitale Gesundheitsversorgung stellen und die Nachhaltigkeitsanforderungen an die Branche harmonisiert und realistisch gestalten.

| BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll ist erstmals in den Vorstand des europäischen Medizintechnik-Dachverbandes MedTech Europe berufen worden. Der BVMed baut damit nach der Eröffnung eines eigenen Brüsseler Büros im November 2022 sein europapolitisches Engagement weiter aus. Der 21-köpfige neue MedTech Europe-Vorstand ist für drei Jahre bis Dezember 2026 gewählt.

Zentrale Herausforderungen der MedTech-Branche auf EU-Ebene sind nach Ansicht des BVMed: Eine patient:innen-zentrierte Versorgung mit Medizintechnologien gewährleisten, eine resiliente Gesundheitsversorgung und strategische Autonomie sicherstellen, die Weichen für eine besser digitale Gesundheitsversorgung stellen und die Nachhaltigkeitsanforderungen an die Branche harmonisiert und realistisch gestalten.

Die Medizintechnik-Branche ist eine dynamische und hoch innovative Zukunfts- und Leitbranche der europäischen Wirtschaft. Europa ist nach den USA der zweitgrößte MedTech-Markt der Welt: mit einem Volumen von rund 160 Milliarden Euro und einem Anteil am Weltmarkt von 26,4 Prozent. „Die 35.000 europäischen MedTech-Unternehmen investieren viel in die Verbesserung und Entwicklung bahnbrechender Technologien zum Wohle der Patient:innen. Dafür brauchen wir auf EU-Ebene ein attraktives Umfeld“, so der BVMed-Geschäftsführer. Dies beinhalte:

  • regulatorisch zukunftsfähige Regelungen und einen Rechtsrahmen, der die Wirtschaft fördert,
  • konkrete politische Entscheidungen, die in der Praxis umsetzbar sind sowie
  • einen starken Binnenmarkt mit Förderung von Technologien und Innovationen.

Konkret fordert der BVMed die europäischen Institutionen in folgenden Feldern zum Handeln auf, um die Standortbedingungen für die innovative und mittelständisch geprägte MedTech-Branche zu verbessern:

  • Stärkung der Resilienz von Lieferketten sowie Autonomie und Liefersicherheit bei kritischen Komponenten
  • Weiterentwicklung der MDR und die Schaffung eines effektiven regulatorischen Rahmens
  • Kleine und mittelständische Unternehmen (KMU) bei allen Regeln mitdenken
  • Digital Health und Nutzung der Gesundheitsdaten-Nutzung verbessern
  • Stärkung der Nachhaltigkeit und notwendigen Patientenschutz und branchenspezifische Anforderungen in Einklang bringen
  • Sicherung der Exportstärke der Branche und internationale Wettbewerbsfähigkeit
Source:

BVMed | Bundesverband Medizintechnologie e.V.

Freudenberg Performance Materials: Dr. Andreas Raps new CEO and Marco Altherr new CFO (c) Freudenberg Performance Materials
Dr. Andreas Raps, CEO from January 1, 2024
15.11.2023

Freudenberg Performance Materials: Dr. Andreas Raps new CEO and Marco Altherr new CFO

New appointments to the Management Board of Freudenberg Performance Materials come into effect on January 1, 2024: Dr. Andreas Raps succeeds Dr. Frank Heislitz as Chief Executive Officer (CEO), and Marco Altherr takes over from Thomas Herr as Chief Financial Officer (CFO). From January 1, 2024, the Management Board of Freudenberg Performance Materials will therefore consist of: Dr. Andreas Raps (CEO), Marco Altherr (CFO) and John McNabb (CTO). McNabb has been CTO since 2018. Dr. Frank Heislitz and Thomas Herr become members of the Freudenberg Group Board of Management on January 1, 2024.

New appointments to the Management Board of Freudenberg Performance Materials come into effect on January 1, 2024: Dr. Andreas Raps succeeds Dr. Frank Heislitz as Chief Executive Officer (CEO), and Marco Altherr takes over from Thomas Herr as Chief Financial Officer (CFO). From January 1, 2024, the Management Board of Freudenberg Performance Materials will therefore consist of: Dr. Andreas Raps (CEO), Marco Altherr (CFO) and John McNabb (CTO). McNabb has been CTO since 2018. Dr. Frank Heislitz and Thomas Herr become members of the Freudenberg Group Board of Management on January 1, 2024.

Dr. Andreas Raps has been a member of the Freudenberg SE Executive Council since 2020 and CEO of EagleBurgmann, a joint venture between the Japanese EKK Group and the Freudenberg Group, since 2016. He previously held several executive management positions at Freudenberg Sealing Technologies from 2004, most recently as CEO of the global Special Sealing Division with 17 manufacturing sites worldwide. Before joining the Freudenberg Group, Raps worked for various management consulting companies in Boston, USA, Munich, Germany, and Zurich, Switzerland. He holds an MBA from the University of Passau. Alongside his job as a consultant, he obtained a PhD with a thesis on strategy implementation in Business Administration. 

Marco Altherr has been CFO of Vibracoustic SE, a Freudenberg Group company, since 2020. He held various senior management positions at Freudenberg & Co. KG, the technology group’s holding company, from 2015 to 2020, most recently as Head of Corporate Controlling and Accounting. Prior to joining Freudenberg, he served in several management roles at Manroland AG, Heidelberger Druckmaschinen, Boehringer Ingelheim and Arthur Andersen. He holds a degree in business administration specializing in controlling and financing from Lahr University.

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

Manfred Hinz neues BVMed-Vorstandsmitglied Foto: BVMed
Manfred Hinz, BVMed-Vorstandsmitglied
06.10.2023

Manfred Hinz neues BVMed-Vorstandsmitglied

Manfred Hinz von 3M Deutschland ist seit dem 1. Oktober 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Ben Bake von Sanitätshaus Aktuell, der aus dem Unternehmen ausscheiden wird.

Manfred Hinz ist Vice President Medical Solutions der 3M Division Europe Middle East Africa (EMEA). Er verantwortet das Medizintechnik Geschäft in Europa. 3M forscht und produziert in Deutschland an mehreren Standorten. Hinz verfügt über 15 Jahre Erfahrung in der Medizin- und Dentaltechnik in nationalen und internationalen Geschäftsleitungs-Rollen sowie über 8 Jahre Erfahrung in der Elektronik-, Elektro- und Telekommunikations-Industrie.

Manfred Hinz von 3M Deutschland ist seit dem 1. Oktober 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Ben Bake von Sanitätshaus Aktuell, der aus dem Unternehmen ausscheiden wird.

Manfred Hinz ist Vice President Medical Solutions der 3M Division Europe Middle East Africa (EMEA). Er verantwortet das Medizintechnik Geschäft in Europa. 3M forscht und produziert in Deutschland an mehreren Standorten. Hinz verfügt über 15 Jahre Erfahrung in der Medizin- und Dentaltechnik in nationalen und internationalen Geschäftsleitungs-Rollen sowie über 8 Jahre Erfahrung in der Elektronik-, Elektro- und Telekommunikations-Industrie.

Er will sich im BVMed-Vorstand dafür einsetzen, Innovationen und Nachhaltigkeit in der Medizintechnik zu ermöglichen, Digitalisierung im Gesundheitswesen zu fördern und den Produktions- und Entwicklungsstandort Deutschland zu stärken: „Innovative und nachhaltige Medizintechnik-Lösungen in Deutschland weiterhin zu ermöglichen, ist für mich angesichts des Ärzte- und Pflegefachkräftemangel, steigendem Effizienzdruck sowie demografischem Wandel zwingend notwendig. Dafür müssen innovationsfördernde Rahmenbedingungen mit Politik und Selbstverwaltung gestaltet werden, beispielsweise der Zugang zu Gesundheitsdaten, eine effektive Zulassung und eine übergreifende Nutzenbewertung“, so Hinz.

Der BVMed-Vorstand besteht aus dem Vorsitzenden Dr. Meinrad Lugan (B. Braun), den Stellvertretenden Vorstandsvorsitzenden Dorothee Stamm (Medtronic) und Dr. Manfred W. Elff (Biotronik) sowie Kristof Boogaerts (Johnson & Johnson), Christian Hauer (Fresenius Kabi), Mark Jalaß (Lohmann & Rauscher), Marc D. Michel (Peter Brehm) und Ulrich Zihla (Paul Hartmann). Der BVMed-Vorstand ist bis April 2024 gewählt. Zudem ist BVMed-Geschäftsführer Dr. Marc-Pierre Möll Mitglied des Vorstands.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

Stefan Brück new Chairman of A+A Advisory Board (c) Messe Düsseldorf GmbH
Stefan Brück, Chairman of A+A Advisory Board
06.10.2023

Stefan Brück new Chairman of A+A Advisory Board

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

“My short and medium-term aim is to move such themes as sustainability but also new technologies and innovations even more into focus in occupational safety. This also includes digital products and solutions such as AI, Virtual Reality or Augmented Reality applications,” explains Stefan Brück and goes on to say: “I look forward to contributing to develop A+A further as the world-leading trade fair and to increasing the social, economic and ecological relevance of PPE on a global scale all year round.”

Source:

Messe Düsseldorf GmbH

Manel Echevarria Photo Ananas Anam
Manel Echevarria
06.09.2023

Ananas Anam: Manel Echevarria new CEO

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

“The appointment of Manel Echevarria as a seasoned CEO with an impressive track-record in the fashion and luxury industry marks another important milestone in setting Ananas Anam up for the next phase of growth” says Dr. Christian Kurtzke, Chairman of Ananas Anam. “Following our investment in the development of an impressive portfolio of next-generation innovative biodegradable, traceable and sustainable materials, and into the setup of its network of strategic partners on the supply and shareholder side, Manel will provide the leadership for driving growth and industrial scale of this pioneering sustainability brand amidst a continued challenging global market environment in fashion, interiors and automotive.”

With Ananas Anam’s core portfolio of innovative materials, the company has successfully collaborated with well-known brands including Nike, Hugo Boss, H&M, Paul Smith and Cat Footwear and sustainable-fashion pioneers like Ecoalf to drive innovation in footwear, as well as with fashion brands like Carolina Herrera in the area of bags and accessories, substituting animal leather in the product design with its vegan, cruelty-free, low-impact and sustainable pineapple leaf fibre based textiles. In July 2023, at the Premiere Vision exhibition in Paris, the company presented the next generation of Piñatex as well as its breakthrough innovation Piñayarn as a biodegradable, traceable and sustainable yarn, and introducing Anam PALF, as a commercially available premium textile grade pineapple leaf fibre, opening up a world of new applications and markets.

“Driving the sustainability transformation in fashion, as well as in interiors and automotive has become a key priority on the agenda of brands and OEMs around the world,” says Manel Echevarria, CEO Ananas Anam. “I am proud to have the opportunity to lead the company in this decisive time, and I am looking forward to collaborating with our exceptional Spanish founder, Dr Carmen Hijosa, and Josep Taylor in Spain, with Bruno de Penanster and his team in the UK, as well as with Chuck Lazaro and his team in the Philippines to turn this amazing sustainability ambition and purpose into a reality.”

Source:

Ananas Anam

Dr. Christian Hauer Foto BVMed | Bundesverband Medizintechnologie e.V.
Dr. Christian Hauer
03.07.2023

Dr. Christian Hauer neues BVMed-Vorstandsmitglied

Dr. Christian Hauer von Fresenius Kabi ist seit dem 1. Juli 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Markus Wiegmann von Stryker Deutschland, der aus dem Unternehmen ausscheiden wird.

Der promovierte Wirtschaftsingenieur Dr. Christian Hauer ist Vorstandsmitglied bei der Fresenius Kabi AG sowie Präsident Fresenius Kabi MedTech. Seine berufliche Karriere begann er in den Jahren 1998 bis 2012 bei Drägerwerk, bevor er zu Fresenius Kabi wechselte. Er war bereits von 2014 bis 2018 Mitglied im BVMed-Vorstand.

Markus Wiegmann war seit 2020 Mitglied des BVMed-Vorstands und zuletzt bei Stryker Geschäftsführer für Deutschland, Österreich, Schweiz und Polen. Der BVMed-Vorstand dankt Markus Wiegmann für sein großes Engagement und die aktive Unterstützung insbesondere in den Bereichen Digitalisierung, Endoprothetik, Robotik sowie pflegeunterstützende Technologien.

Dr. Christian Hauer von Fresenius Kabi ist seit dem 1. Juli 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Markus Wiegmann von Stryker Deutschland, der aus dem Unternehmen ausscheiden wird.

Der promovierte Wirtschaftsingenieur Dr. Christian Hauer ist Vorstandsmitglied bei der Fresenius Kabi AG sowie Präsident Fresenius Kabi MedTech. Seine berufliche Karriere begann er in den Jahren 1998 bis 2012 bei Drägerwerk, bevor er zu Fresenius Kabi wechselte. Er war bereits von 2014 bis 2018 Mitglied im BVMed-Vorstand.

Markus Wiegmann war seit 2020 Mitglied des BVMed-Vorstands und zuletzt bei Stryker Geschäftsführer für Deutschland, Österreich, Schweiz und Polen. Der BVMed-Vorstand dankt Markus Wiegmann für sein großes Engagement und die aktive Unterstützung insbesondere in den Bereichen Digitalisierung, Endoprothetik, Robotik sowie pflegeunterstützende Technologien.

Der BVMed-Vorstand besteht aus dem Vorsitzenden Dr. Meinrad Lugan (B. Braun), den Stellvertretenden Vorstandsvorsitzenden Dorothee Stamm (Medtronic) und Dr. Manfred W. Elff (Biotronik) sowie Ben Bake (Sanitätshaus Aktuell), Kristof Boogaerts (Johnson & Johnson), Mark Jalaß (Lohmann & Rauscher), Marc D. Michel (Peter Brehm) und Ulrich Zihla (Paul Hartmann). Der BVMed-Vorstand ist bis April 2024 gewählt. Zudem ist BVMed-Geschäftsführer Dr. Marc-Pierre Möll Mitglied des Vorstands.

More information:
BVMed
Source:

BVMed | Bundesverband Medizintechnologie e.V.
 

(c) EREMA
Manfred Hackl, CEO EREMA Group GmbH
17.05.2023

EREMA: Manfred Hackl is Plastics Recycling Ambassador of the Year

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

"I dedicate the Recycling Ambassador of the Year award to the employees at the EREMA Group. This year we are celebrating our 40th anniversary, and this award, just like the many we have received for our technologies over the years, shows that we can be very proud of what we have accomplished and achieved together during this time," says Manfred Hackl, delighted with the award. In the past business year 2022/23 alone, the extruders supplied by the companies within the EREMA Group deliver an additional 1.6 million tonnes of recycling capacity.

Source:

EREMA Group GmbH

(c) Michael Kretzschmar
Awards Honorary Doctorate to Professor Dr. Paul Kiekens by Professor Dr. Ursula M. Staudinger, Rector of the TU Dresden
12.04.2023

TU Dresden awards Honorary Doctorate to Professor Paul Kiekens

In recognition of his extraordinary engineering achievements in the fields of textile mechanical engineering, textile technology as well as textile chemistry and surface modification of textile semi-finished products, Prof. Paul Kiekens was awarded the title of Doctor honoris causa (Dr.-Ing. h.c.) on April 5, 2023.
 
Prof. Kiekens was a university professor at Ghent University, Belgium, for almost 35 years and thus responsible for textile-oriented education and research. Intensive interaction with European business and science was always particularly important to him.
 

In recognition of his extraordinary engineering achievements in the fields of textile mechanical engineering, textile technology as well as textile chemistry and surface modification of textile semi-finished products, Prof. Paul Kiekens was awarded the title of Doctor honoris causa (Dr.-Ing. h.c.) on April 5, 2023.
 
Prof. Kiekens was a university professor at Ghent University, Belgium, for almost 35 years and thus responsible for textile-oriented education and research. Intensive interaction with European business and science was always particularly important to him.
 
Immediately after the fall of the Berlin Wall, he opened the way for international cooperation in teaching and research in the field of textile mechanical engineering, textile technologies, and textile chemistry for the only Eastern European university research institution with a textile orientation, the ITM (formerly ITB) at the Faculty of Mechanical Engineering of TU Dresden, and provided great and uncomplicated support. A close, lasting and intensive relationship developed, which had a trend-setting influence on the scientific career of Professor Paul Kiekens. This was reflected above all in the expert advice given for major projects.
 
These include, for example, the funded junior research group "Holistic approach to the development and modelling of a new generation of multiaxial fabrics for fibre composites to strengthen Saxon, French and Flemish industry in the high-performance sector" (SAXOMAX) and jointly acquiring the EU project "Large scale manufacturing technology for high performance lightweight 3D multifunctional composites" (3D-LightTrans). Especially in these large-scale projects, intensive cooperation with industrial partners was essential for success.
 
As early as the 1990s, Professor Paul Kiekens had the vision of creating a European network for universities in textile teaching and research. In 1994, the Association of Universities for Textiles (AUTEX) was founded with the aim of establishing teaching and research in the field of textile technology at an internationally respected level through joint concepts. Due to the prevailing cooperation at that time between Professor Dr. Paul Kiekens and Professor Dr. Peter Offermann, the TU Dresden, represented by the ITM (formerly ITB), has been a full member and decisively integrated in the network since its foundation on July 1, 1994. Thus Prof. Dr.-Ing. habil. Paul Kiekens has significantly promoted the international cooperation of the TU Dresden, Faculty of Mechanical Engineering with international university textile research institutions.
 
Professor Paul Kiekens was executive coordinator of AUTEX until his retirement. The internationally renowned symposium takes place annually as a part of AUTEX.

Source:

Technische Universität Dresden - Institute of Textile Machinery and High Performance Material Technology

13.01.2023

MS Printing Solutions and JK Group announce Christopher Bernat as General Manager

MS Printing Solutions and JK Group announce the appointment of Christopher Bernat as General Manager of North America and the Caribbean markets. He will be the main point of contact for overall business in the region. Chris joins MS Printing Solutions and JK Group with over 20 years of industry experience.

He was Director of Sales at Sawgrass Technologies prior to starting Vapor Apparel in 2004. He currently serves on the Executive Committee and Board of Directors of Printing United and resides in Charleston, South Carolina.

MS Printing Solutions and JK Group announce the appointment of Christopher Bernat as General Manager of North America and the Caribbean markets. He will be the main point of contact for overall business in the region. Chris joins MS Printing Solutions and JK Group with over 20 years of industry experience.

He was Director of Sales at Sawgrass Technologies prior to starting Vapor Apparel in 2004. He currently serves on the Executive Committee and Board of Directors of Printing United and resides in Charleston, South Carolina.

Source:

JK Group SpA

(c) BVMed | Christian Kruppa
06.01.2023

BVMed trauert um Joachim M. Schmitt

Der Bundesverband Medizintechnologie (BVMed) trauert um seinen langjährigen Geschäftsführer und Vorstandsmitglied Joachim M. Schmitt. Er verstarb am Neujahrstag 2023 im Alter von 71 Jahren.

Schmitt kam 1985 zum BVMed und war von 1990 bis 2019 Geschäftsführer des deutschen Medizintechnik-Verbandes. Unter Führung von Schmitt wurde der Vertretungsbereich des Verbandes kontinuierlich ausgebaut, eine proaktive politische Arbeit etabliert und mit dem Umzug nach Berlin 2001 konsequent intensiviert. Weitere Meilensteine waren die Erarbeitung des Kodex Medizinprodukte in den 90er Jahren und der Aufbau der BVMed-Eventtochter MedInform (heute BVMed-Akademie) zu einem stetig wachsenden Informations- und Seminar-Service.

„Wir verlieren mit Joachim M. Schmitt eine prägende Gestalt des Verbandes und das jahrzehntelange Gesicht der deutschen MedTech-Branche. Wir verneigen uns vor einer großen Persönlichkeit und seiner unternehmerischen Leistung. Sein Wirken und sein menschliches Vorbild werden unvergessen bleiben“, so der BVMed-Vorstandsvorsitzende Dr. Meinrad Lugan sowie BVMed-Geschäftsführer und Schmitt-Nachfolger Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie (BVMed) trauert um seinen langjährigen Geschäftsführer und Vorstandsmitglied Joachim M. Schmitt. Er verstarb am Neujahrstag 2023 im Alter von 71 Jahren.

Schmitt kam 1985 zum BVMed und war von 1990 bis 2019 Geschäftsführer des deutschen Medizintechnik-Verbandes. Unter Führung von Schmitt wurde der Vertretungsbereich des Verbandes kontinuierlich ausgebaut, eine proaktive politische Arbeit etabliert und mit dem Umzug nach Berlin 2001 konsequent intensiviert. Weitere Meilensteine waren die Erarbeitung des Kodex Medizinprodukte in den 90er Jahren und der Aufbau der BVMed-Eventtochter MedInform (heute BVMed-Akademie) zu einem stetig wachsenden Informations- und Seminar-Service.

„Wir verlieren mit Joachim M. Schmitt eine prägende Gestalt des Verbandes und das jahrzehntelange Gesicht der deutschen MedTech-Branche. Wir verneigen uns vor einer großen Persönlichkeit und seiner unternehmerischen Leistung. Sein Wirken und sein menschliches Vorbild werden unvergessen bleiben“, so der BVMed-Vorstandsvorsitzende Dr. Meinrad Lugan sowie BVMed-Geschäftsführer und Schmitt-Nachfolger Dr. Marc-Pierre Möll.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

(c) INDA
MaryJo Lilly, Market Intelligence Leader
30.11.2022

INDA names MaryJo Lilly as Market Intelligence Leader

INDA, the Association of the Nonwoven Fabrics Industry, has named MaryJo Lilly as its new Market Intelligence Leader. Lilly brings more than 20 years of nonwovens & engineered materials expertise with a background in the disposable, medical and specialty materials industries.

Before starting a consulting firm two years ago, Lilly was Regional Commercial Director of North America for Tredegar Film Products and before that, spent more than a decade as Vice President of Sales at Berry Global in the Health, Hygiene, and Specialties Division growing the personal care and medical markets.

Additionally, Lilly’s leadership experience includes Global Business Director at Clopay Plastic Products and Director of Sales and Marketing for Absorbent Materials at Rayonier Performance Fibers. Lilly holds a Ph.D. from the University of Pittsburgh.

INDA, the Association of the Nonwoven Fabrics Industry, has named MaryJo Lilly as its new Market Intelligence Leader. Lilly brings more than 20 years of nonwovens & engineered materials expertise with a background in the disposable, medical and specialty materials industries.

Before starting a consulting firm two years ago, Lilly was Regional Commercial Director of North America for Tredegar Film Products and before that, spent more than a decade as Vice President of Sales at Berry Global in the Health, Hygiene, and Specialties Division growing the personal care and medical markets.

Additionally, Lilly’s leadership experience includes Global Business Director at Clopay Plastic Products and Director of Sales and Marketing for Absorbent Materials at Rayonier Performance Fibers. Lilly holds a Ph.D. from the University of Pittsburgh.

With her industry knowledge and extensive network, Lilly will develop, issue and present reports, presentations and data to support INDA, member decision-making and the industry. She will, through collaboration with market participants and subject matter experts, develop and maintain relevant industry statistics, reports and surveys on the North American and worldwide markets by major segments and processing technologies.

More information:
INDA nonwovens Marketing
Source:

INDA

04.10.2022

Carbios appoints new Director of Operations and Expertise Team

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Frédéric Alarcon, Licensing Manager, who joined Carbios on September 5. His role is to build and deploy the process licensing model that is at the heart of Carbios’ business model;
  • Arnaud Tillon, Group Marketing Director, who joined the firm on September 12. He will support the company’s development by defining and deploying the marketing strategy. He is also in charge of reinforcing the customer culture within the organization.

Martin Stephan will leave his position as Deputy CEO on October 15, 2022, after nearly six years at Carbios.

Emmanuel Ladent, Carbios’ Chief Executive Officer: "The appointment of Stéphane Ferreira as Director of Operations is excellent news for Carbios. His extensive experience in global markets will help Carbios reach a new level, by deploying the company’s proprietary technologies on a large scale. I am also very pleased with the recent arrivals of Frédéric Alarcon and Arnaud Tillon, whose respective expertise in licenses and mass-market offers will be invaluable. Lastly, on behalf of all Carbios’ teams, I want to salute and thank Martin Stephan for his continued commitment to the company’s development. His experience, expertise and skills have been key to developing partnerships which have enabled Carbios to be so close to industrial deployment and recognized as the future worldwide leader of plastics and fibers in the circular economy."

More information:
Carbios Managing Director
Source:

Carbios

04.10.2022

Carbios appoints Pascal Bricout as Chief Strategy and Financial Officer

Carbios announced the appointment of Pascal Bricout as Chief Strategy and Financial Officer and a member of the Company’s Executive Committee.

Mr. Bricout will oversee the management and organization of Carbios’ Finance division. He will also steer the Group’s Strategy, investor relations and the launch of the company’s Corporate Social Responsibility policy. He joins the company with over 30 years’ experience in finance, strategy and international mergers and acquisitions.
 
Prior to joining Carbios, Mr. Bricout served as Chief Financial Officer for Michelin in Asia, which is a major area of growth and development for the company. Over the past 10 years, he has focused primarily on major strategic mergers and acquisitions.

Mr. Bricout holds a Master Degree in Finance from Université Paris-Dauphine. He began his career at PwC, as a manager in the International Transactions Services teams in Paris and London.

Carbios announced the appointment of Pascal Bricout as Chief Strategy and Financial Officer and a member of the Company’s Executive Committee.

Mr. Bricout will oversee the management and organization of Carbios’ Finance division. He will also steer the Group’s Strategy, investor relations and the launch of the company’s Corporate Social Responsibility policy. He joins the company with over 30 years’ experience in finance, strategy and international mergers and acquisitions.
 
Prior to joining Carbios, Mr. Bricout served as Chief Financial Officer for Michelin in Asia, which is a major area of growth and development for the company. Over the past 10 years, he has focused primarily on major strategic mergers and acquisitions.

Mr. Bricout holds a Master Degree in Finance from Université Paris-Dauphine. He began his career at PwC, as a manager in the International Transactions Services teams in Paris and London.

Mr. Bricout, Carbios’ Chief Strategy & Financial Officer noted: “I am thrilled to be joining Carbios and proud to take part in this concrete, meaningful advance toward circular economy. Having developed unparalleled breakthrough technologies in plastic and textile biodegradation and biorecycling, Carbios now needs to execute a successful industrial and commercial phase. This is crucial for companies using PET to achieve, from 2025, their sustainable development goals. Within this dynamic context, Carbios and its subsidiary, Carbiolice, are poised to become global leaders in the development and industrialization of innovative bioprocesses to revolutionize the life cycles of plastics and textiles.”

More information:
Carbios green chemistry polymer
Source:

Carbios

(c) Fraunhofer UMSICHT/Mike Henning
Prof. Christian Doetsch (l.) and Prof. Manfred Renner (r.)
09.08.2022

Fraunhofer UMSICHT: New institute directors

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

Source:

Fraunhofer UMSICHT

19.07.2022

IVL: Corpus Christi Polymers plant in Texas resumes construction

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Construction of the plant is resuming following a period of pandemic-related disruptions. Through the pandemic, the partners firmly resolved to continue planning amid continued robust demand for PET packaging and the need for shorter supply chains. As the impact of the pandemic eased in 2022, the management team was strengthened in preparation for the resumption in activities.

CCP is expected to be the largest vertically integrated PTA-PET production plant in the Americas, and IVL’s biggest greenfields project in the U.S. since the development of the AlphaPet production facility at Decatur, Alabama in 2009. The new Texas facility is a significant addition to IVL’s leading global footprint, and will expand its coverage to customers across the U.S. The plant’s vertical integration optimizes PTA-PET production and, together with the availability of raw materials Paraxylene and Mono Ethylene Glycol in the U.S., ensures long-term competitive-cost supply for IVL’s locally integrated polyester value chain.

The facility will have nominal annual capacities of 1.1 million metric tons of PET and 1.3 million metric tons of PTA, shared between the partners. It will employ three state-of-the-art technologies: PTA: IntegRex®, PET melt: Invista, and PET solid state: Easy Up (HCIRR – Horizontal Continuous slightly Inclined Rotary Reactor).

CCP is adding to its leadership team to prepare for the new growth opportunities. Mr Russell Wilson will leave his role with IVL as Head of Manufacturing Americas, Combined PET, to take up a new role as Chief Executive Officer of CCP from 18 July. He brings 30 years of Aromatics and PET leadership experience including prior roles with Amoco and BP before joining IVL. Mr Todd Hogue, IVL’s Global Head of EH&S, replaces Mr Wilson as IVL’s representative on CCP’s Board. Mr Michael Day joined CCP as Project Director in June and brings 34 years of construction leadership experience including senior roles with Bilfinger, KBR, and CB&I.  Mr Jeff Shea will assume the role of Chief Operating Officer on 18 July.  Mr Shea has been in the PET industry for the last 22 years and has managed PET sites for the last 17. 

Source:

Indorama Ventures Public Company Limited