From the Sector

The full potential of advanced coating and finishing technologies for the production of technical textiles will be outlined by Monforts specialists which takes place in Atlanta, Georgia, in May.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the VDMA German Pavilion at the show, at stand 3231 within the Georgia World Congress Center.

A wide range of technical fabrics is now being successfully created with MontexCoat coating units in comination with Montex stenters, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables.

Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments can all be carried out with the extremely versatile system. Solvent coatings in explosion-proof conditions, knife coating, roller coating and screen printing are further options and the MontexCoat has been engineered to enable users to switch quickly from one fabric run to the next without compromising on the economical use of energy or raw materials.

“There has already been terrific interest in the MontexCoat and the range of different techniques it enables and we’re far from exhausting its potential uses,” says Achim Gesser, Monforts Area Sales Manager who will be at the show in Atlanta. “For companies who don’t need such flexibility, the economical coaTTex unit is exclusively dedicated to air knife and knife-over-roller coating.

“At our ATC in Mönchengladbach, Germany, however, a MontexCoat unit has been integrated into a full Montex technical textiles pilot line, on which our customers can run trials of new fabrics and finishing formulations in widths of up to 1.8 metres. This line has been engineered to provide the ultimate in precision coating and finishing in industrial-scale trials.”

To fully demonstrate what’s possible, the Montex line at the ATC is able to treat materials not only at temperatures of up to 320°C, but apply separate coatings on the two sides of certain materials at different temperatures, within a single pass through the machine. To achieve this, the first two chambers of the stenter are fitted with TwinTherm burners for individual top/bottom heating. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment parameters.

“There are many applications where employing two separate temperature treatments is beneficial, such as floorcoverings – where the textile face fabric is treated at one temperature and the rubber backing at another – as well as PVC flooring employing chemical foams, black-out roller blinds with heavy backings or PTFE-coated filter materials,” Gesser explains.

Another key feature of the technical textiles line at the ATC is the Montex stenter’s special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Monforts also offers the special T-max grease-free stenter chain for high temperature treatments up to 320°C, at machine speeds up to 100m/min and transverse tension up to 2,500 N/m with the benefits of no maintenance and no grease marks on fabric.

“Technical textiles are extremely diverse in their end-use applications but the needs of the manufacturers of very different materials are still uniform in many respects,” says Gesser. “European-built Montex stenters provide maximum finishing efficiency and many of our customers are operating them 24 hours a day over seamless shifts.”

Existing customers include manufacturers in the fields of home textiles, geotextiles and automotive fabrics, as well as functional materials and dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics.

“Techtextil North America is a very important show for us because technical textiles are a key pillar of our production programme,” Gesser concludes. “North America is one of our major markets and we are looking forward to reconnecting with existing and potentially new customers at this always-vibrant show.”

Klopman, a European leader in the production of fabrics for workwear, and TDV Industries, a France-based company specializing in textiles for technical and military clothing, completed an innovative project for the creation of an advanced tool to calculate the Life Cycle Assessment of their fabrics. The tool has obtained the well-recognized EPD (Environmental Product Declaration) certification from Environdec.

The EPD certification validates the methodology and results of a product's Life Cycle Assessment (LCA), a rigorous methodology that evaluates the environmental impact of a given product throughout all phases of its life cycle: from raw material extraction to production, usage, and disposal. This approach provides a comprehensive and accurate overview of environmental impacts, and the production processes involved. LCA allows for the measurement of parameters such as greenhouse gas emissions, energy consumption, water usage, and other environmental indicators, offering a scientific basis for improving efficiency and reducing the ecological footprint of products.

The Environmental Product Declaration (EPD) is a certified verification system that ensures a transparent and reliable assessment of a product's environmental impact. This certification follows international standards and enables companies to demonstrate their commitment to sustainability, improving transparency with customers and business partners.

Thanks to the new tool, Klopman and TDV Industries can now accurately calculate the environmental impact of each stage of their fabric production. This allows both companies to generate complete EPD certifications in compliance with international regulations, ensuring greater transparency and credibility for their products.

"Our Group has always been committed to sustainability projects, both within the company and regarding the products we bring to the market. Today, with this tool, we want to provide our customers with clear answers about the impact of our fabrics in terms of CO2 emissions, water, and land consumption, but also beyond that," says Amaury Sartorius, Group Commercial Director and Managing Director of Klopman. "The textile industry is undergoing a transition toward more sustainable production processes, and this project fits perfectly within this evolution. With this tool, we aim to produce fabrics with an increasingly lower environmental impact, thereby helping our customers in their sustainability and decarbonization journeys (such as SBTi).”

In September, Ontex reached a binding agreement to sell its Brazilian business activities to Softys SA for an enterprise value of approximately €110 million, enabling improved focus on retail brands and healthcare in Europe and North America. Net proceeds of approximately €82 million are due at closing, which is expected during the first half of 2025, subject to customary conditions.

In October, the social negotiations regarding the transformation of the operating footprint in Belgium were successfully concluded. This transformation fits in Ontex’s footprint optimization, allowing to further strengthen Ontex’s competitive position. The total one-time cost is estimated at €(66) million, of which €(37) million was already recorded in the second quarter.

Q3 2024 results

• Revenue was €468 million, up 1.7% like for like. Volumes, including mix effects, were up 4.4%, driven by contract gains and supportive demand in adult care, and by growth in baby care with new retail customers in North America. Sales prices were 2.6% lower, as expected, reflecting raw material index decreases and investments in increased competitiveness. Forex fluctuations were supportive, adding 0.7%, bringing total growth at 2.4%.
• Adjusted EBITDA was €56 million, up 29% year on year, thanks to volume and mix growth and the cost transformation program delivery, contributing €8 million and €14 million respectively. The operational efficiency improved further by 3.7%, driving stronger profitability and competitiveness. Index-driven lower raw material costs more than compensated for lower sales prices, leading to a €4 million positive net impact. The increase of other operating and SG&A costs had a €(12) million effect, mostly due to continued inflation. Forex fluctuations had an adverse effect of €(2) million. The adjusted EBITDA margin thereby rose to 12.0%, up 2.4pp year on year.
• Operating profit was €8 million, compared to €29 million in 2023. The decrease relates to the transformation of the Belgian operating footprint and reflects the additional one-time provisions taken following the recent successful conclusion of the social plan negotiations.
• Discontinued operations generated a €14 million operating profit, compared to €12 million in 2023. While revenue was 3.0% lower like for like and the adjusted EBITDA margin dropped to 7.6%, reflecting more challenging market conditions, this was compensated by a net gain on disposal, that was triggered by the agreement to divest the Brazilian business.
• Net financial debt for the Total Group dropped €9 million to €579 million over the quarter. Combined with the adjusted EBITDA improvement, the leverage ratio thereby fell from 2.5x at the end of June to 2.4x at the end of September.

2024 outlook

Ontex’s management confirms its guidance for adjusted EBITDA margin, free cash flow and leverage for the full year. While new customers are on-boarded in North America, the ramp-up is phased more gradually over the third quarter and the coming months, leading management to review its revenue growth guidance, now expecting:

• Revenue [1] to grow between 2% and 3% like for like;
• Adjusted EBITDA margin [1] of 12%;
• Free cash flow higher than €20 million;
• Leverage ratio below 2.5x at year end.

As of July 1, Marcel Perrevort has been appointed Chief Sales Officer (CSO) of the Reifenhäuser Group. He succeeds Ulrich Reifenhäuser, who had been in this position for more than 25 years. With this decision, the family-owned machinery and plant manufacturer is consistently continuing the already initiated generational transition in its management structure.

Perrevort has held various sales and management positions within the Reifenhäuser Group for over ten years - most recently as Managing Director of Reifenhäuser Blown Film. In his new role as CSO, he is primarily responsible for the Group's sales and service strategy and its alignment with the activities of the business units.

Ulrich Reifenhäuser will continue his work in associations and committees within the plastics industry and will remain at the disposal of the Reifenhäuser Group as a representative and consultant with adjusted work hours.

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Archroma is again partnering with ISPO Academy to inspire promising young design talents in a four-day Masterclass held alongside ISPO Munich 2023 to explore this year’s theme, “CIRCULARITY – Create | Adapt | Revive.”

ISPO Munich is a leading trade fair for the sports industry. It is expecting to welcome more than 50,000 visitors and over 2,000 exhibitors to the Trade Fair Center Messe München from 28-30 November.

Conceived as a bridge between education and industry, the ISPO Academy Masterclass gathers top students from design and fashion schools to collaborate on new sportswear concepts. The aim is to encourage multidisciplinary thinking and future-oriented approaches. The event includes support from industry innovators, including Archroma’s Color Management business, and culminates in a public presentation in which the Masterclass participants present the workshop results to the ISPO audience on November 29.

Sponsoring the Masterclass for the fifth time, Archroma will equip the teams with The Color Atlas by Archroma® to enable them to use a library of 5,760 colors for cotton and polyester fibers to develop their concepts in compliance with leading international eco-standards. The Color Atlas will help the students to both explore new perspectives at the design stage and prepare their presentations with colors that accurately communicate their vision.

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

Overview of the collection
The collection is divided into 4 themes.
Natural, biodegradable or recycled fibre blends intended for crepe and crinkled fabrics are characterized by substantial twist and a high level of performance. The selection of fibres is oriented towards sustainability, with wool and silk organze combined with LENZINGTM ECOVEROTM viscose and Q-NOVA® regenerated polyamide.

Fuji crepe X-compact Nm 40/1 Z 1050 (40% wool 21.2 μ, 60% FSC certified LENZINGTM viscose EV), new this season, features a smooth look and no pilling thanks to the use of X-compact spinning technology, which produces yarns with excellent performance and durability.

When it comes to light, natural blends, wool and linen or wool, linen and silk blends follow the trend for softly fluid structures, such as the new Peschici Nm 42/1 Z 600 (53% wool 18.4 μ, 23% linen, 24% silk), with a fresh, dry handle and very current dappled effect, which results from the skilful combination of different fibres.

Contributing to a more sustainable and traceable textile production also involves attention to all fibres used. Mohair used for luxury yarns in noble fibres is strictly RMS (Responsible Mohair Standard) certified, which traces its origin, guaranteeing animal welfare and production according to responsible standards, similar to the analogous RWS (Responsible Wool Standard) used for wool. Bosforo RWS RMS Nm 32/1 Z 950 (20% wool 20.8 μ RWS, 60% FSC certified LENZINGTM viscose EV, 20% RMS Kid Mohair) is a fresh, bright yarn that is soft on the skin, suitable for trans-seasonal products, an example of careful selection of raw materials.

Among the fancy yarns, delicately animated structures predominate for naturally elegant creations, represented by Niche Nm 34/2 S 460 (42% wool 21.2 μ, 58% bourette silk), a twisted yarn in wool and bourette silk, which adds dynamism with its characteristic rough, knotty surface.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO₂ emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

CELLIANT® with REPREVE®, introduced by Hologenix with global textile solutions provider UNIFI®, makers of REPREVE®, has been awarded a Top 5 Selection in the Accelerated Eco category of the Spring/Summer ISPO Textrends 2025 Awards.

Last fall CELLIANT with REPREVE was also awarded a Selection in the Fibers & Insulation Category of the ISPO Textrends Fall/Winter 2024/2025. In addition, in the spring the fiber was shortlisted in the Drapers Sustainable Fashion 2023 Awards in the Sustainable Textile Innovation category.

Twice a year, ISPO recognizes innovative fibers, fabrics and components that are used to manufacture sports apparel. Both companies are excited that this innovation, whereby CELLIANT infrared (IR) technology is embedded into REPREVE, a brand of recycled fiber, has achieved these honors. CELLIANT with REPREVE is a performance fiber made from recycled materials that have been enhanced with IR technology to provide wellness benefits to the consumer.  

CELLIANT is a natural blend of IR-generating bioceramic minerals, which, when embedded into textiles, allows them to convert body heat into infrared energy, returning it to the body and temporarily increasing local circulation and cellular oxygenation. This aids in muscle recovery, increases endurance, and improves overall performance in healthy individuals, among other benefits.
 
REPREVE recycled performance fiber consists of high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and pre-consumer waste. It is also certified and traceable with UNIFI’s U TRUST® verification and FiberPrint™ technology, which provide assurance that the product comes from recycled materials. Compared to virgin fiber, REPREVE helps to offset the use of petroleum, conserving water and energy and emitting fewer greenhouse gasses.

This award marks the third year in a row that Hologenix has had its CELLIANT technology recognized in the ISPO Textrends Awards. CELLIANT in pure white was a Top Ten Winner in 2022. The prior year, CELLIANT Viscose was a Selection Winner as well.