From the Sector

Reset
38 results
22.07.2021

Lenzing awarded platinum status for sustainability by EcoVadis

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group’s ambitious climate targets form an essential part of its strategy and responsibility to future generations. In 2019, Lenzing became one of the world’s first fiber manufacturers to commit to reducing CO2 emissions per ton of product by 50 percent by 2030, and even becoming climate-neutral by 2050. The Science Based Targets Initiative, a recognised organisation in the area of climate-relevant target-setting, has scientifically validated Lenzing’s climate targets.

This scientific validation also forms one of the essential criteria that EcoVadis highlights in its rating. In addition, the responsible procurement of raw materials – according to social and ecological aspects – was also highlighted as a further core element in the company’s sustainability strategy, as well as support for external environmental initiatives (Sustainable Apparel Coalition, Fashion Industry Charter for Climate Action) and initiatives on labour and human rights issues (Sustainable Apparel Coalition).

Aachen-Dresden-Denkendorf International Textile Conference 2021 (c) ITM/TU Dresden
Die ADD-ITC 2019 in Dresden
12.07.2021

Aachen-Dresden-Denkendorf International Textile Conference 2021

Die Aachen-Dresden-Denkendorf International Textile Conference wird in diesem Jahr vom 9. bis zum 10. November digital durchgeführt.

Programm und Themen:
 
Quo vadis Textilmaschinenkonzepte?

  • Flexibilisierung auf dem Weg zur Losgröße 1
  • Industrie 4.0
  • Neue Produkte durch Maschineninnovationen
  • Ressourcen- und Energieeffizienz

Chancen mit neuen Werkstoffen: Hochleistungsfasern und Faserverbundwerkstoffe

  • Carbonfasern, Keramikfasern, bio-basierte Fasern
  • Fasermodifizierung, Sekundärspinnen, Rezyklierstrategien, Prozesstechnologien
  • Formangepasste Faserverbünde, polymere Matrixmaterialien
  • Blick in neuartige Werkstoffe – Simulation und Prüfsysteme

Wettbewerbsvorteile und Nachhaltigkeit: Funktionalisierung, neue Ausrüstungen

  • Nachhaltige Beschichtungs- und Ausrüstungschemikalien
  • Beschichten, Laminieren
  • Umweltfreundliche Prozesse
  • Textildruck

Neue Herausforderungen: Medizintextilien / Medizintechnik

Die Aachen-Dresden-Denkendorf International Textile Conference wird in diesem Jahr vom 9. bis zum 10. November digital durchgeführt.

Programm und Themen:
 
Quo vadis Textilmaschinenkonzepte?

  • Flexibilisierung auf dem Weg zur Losgröße 1
  • Industrie 4.0
  • Neue Produkte durch Maschineninnovationen
  • Ressourcen- und Energieeffizienz

Chancen mit neuen Werkstoffen: Hochleistungsfasern und Faserverbundwerkstoffe

  • Carbonfasern, Keramikfasern, bio-basierte Fasern
  • Fasermodifizierung, Sekundärspinnen, Rezyklierstrategien, Prozesstechnologien
  • Formangepasste Faserverbünde, polymere Matrixmaterialien
  • Blick in neuartige Werkstoffe – Simulation und Prüfsysteme

Wettbewerbsvorteile und Nachhaltigkeit: Funktionalisierung, neue Ausrüstungen

  • Nachhaltige Beschichtungs- und Ausrüstungschemikalien
  • Beschichten, Laminieren
  • Umweltfreundliche Prozesse
  • Textildruck

Neue Herausforderungen: Medizintextilien / Medizintechnik

  • Sensorische und aktorische Medizinprodukte
  • Personalisierte Medizin
  • Neue Biomaterialien, drug delivery
  • Resorbierbare polymere Implantate zur Unterstützung regenerativer Prozesse

Neue Anwendungen, neue Märkte

  • Textiles Bauen, Architektur
  • Mobilität
  • Energie
  • Umwelt

Transfersession „Von der Idee bis zur Praxis“

  • Präsentation von Innovationen (z. B. Produkte, Technologien, Verfahren), die aus Forschungskooperationen, insbesondere über IGF/ZIM, erfolgreich in die Industrie transferiert werden
Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf

Lenzing is on the path to climate-neutral production (c) Lenzing AG
27.05.2021

Lenzing is on the path to climate-neutral production

  • New air purification and sulfur recovery plant up and running at the Lenzing facility
  • Another step closer to meeting sustainability and climate targets
  • Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

  • New air purification and sulfur recovery plant up and running at the Lenzing facility
  • Another step closer to meeting sustainability and climate targets
  • Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

“As a result of this investment, Lenzing has made further progress towards implementing its climate targets, while achieving much greater autonomy with regard to one of its core raw materials”, says Christian Skilich, Member of the Managing Board at Lenzing Group.

In 2019, Lenzing set the strategic target of halving its group-wide greenhouse gas emissions per ton of product by 2030. Its goal for 2050 is to achieve climate neutrality.

Source:

Lenzing AG

12.05.2021

Rieter updates Outlook for First Half Year 2021

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter Management AG

22.04.2021

Lenzing Group: Sustainability Report 2020

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes.

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

 

*See attached document for more information..

13.04.2021

Origin Materials and PrimaLoft develop Carbon-Negative Insulating Fiber

  • PrimaLoft and Origin Materials have launched a program to develop high-performance, carbon-negative insulating fibers for diverse apparel applications, including for leading outdoor, fashion, and lifestyle brands, as well as home goods applications such as hypoallergenic insulated bedding.
  • PrimaLoft, an advanced material technology company and a world leader in the development of high-performance insulations and fabrics, will develop the fibers with Origin Materials to address demand for sustainable, high-performance materials from its over 900 global brand partners. PrimaLoft iconic brand partners include Patagonia, Stone Island, L.L. Bean, Lululemon, adidas and Nike.
  • The program will focus on carbon-negative PET and next-generation polymers produced by the Origin Materials patented technology platform, which turns sustainable wood residue into cost-advantaged, carbon-negative materials that reduce the need for fossil resources.

Origin Materials, Inc.

  • PrimaLoft and Origin Materials have launched a program to develop high-performance, carbon-negative insulating fibers for diverse apparel applications, including for leading outdoor, fashion, and lifestyle brands, as well as home goods applications such as hypoallergenic insulated bedding.
  • PrimaLoft, an advanced material technology company and a world leader in the development of high-performance insulations and fabrics, will develop the fibers with Origin Materials to address demand for sustainable, high-performance materials from its over 900 global brand partners. PrimaLoft iconic brand partners include Patagonia, Stone Island, L.L. Bean, Lululemon, adidas and Nike.
  • The program will focus on carbon-negative PET and next-generation polymers produced by the Origin Materials patented technology platform, which turns sustainable wood residue into cost-advantaged, carbon-negative materials that reduce the need for fossil resources.

Origin Materials, Inc. (“Origin Materials”), a leading carbon negative materials company, and PrimaLoft, an advanced material technology company and a leader in the development of high-performance insulations and fabrics, announced a new program to develop carbon-negative, insulating, high-performance fibers. The fibers will be used across a diverse array of end products, including insulating fiber for leading outdoor, fashion, and lifestyle brands, as well as home goods applications such as hypoallergenic insulated bedding.

The companies will work to rapidly develop and commercialize new products derived from Origin Materials’ platform. The collaboration will leverage the leadership position of PrimaLoft as a specialty producer of insulating fibers and filaments with over 900 global brand partners, as well as a large global network of manufacturers that employ a wide array of textile processes to make its products, including extrusion, carding, spinning, finishing, weaving, knitting, dyeing, airlaid, meltblown, and other technologies.

The collaboration builds on PrimaLoft’s “Relentlessly Responsible™” mission to elevate both performance and sustainability, through innovation. The platform includes PrimaLoft® Bio™, which was developed and launched into the market in late 2018 as an effort to battle microplastics in the ocean; PrimaLoft® P.U.R.E.™, which provides materials manufactured with greater than 50% CO2 savings; and PrimaLoft’s post-consumer recycling initiative. The next frontier for the company is non-petroleum based raw materials, including products that biodegrade and other circular economy solutions.

Source:

crystal communications

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

19.01.2021

Lenzing plans Upper Austria's largest ground-mounted photovoltaic plant

With the industrial use of solar energy, Lenzing sets new standards regarding decarbonization in the fiber industry.

The Lenzing Group plans Upper Austria’s largest ground-mounted photovoltaic plant on an area of around 55,000 m². The groundbreaking ceremony is scheduled to take place in summer 2021. After the expected commissioning in the second half of 2021, the plant's output will amount to 5.5 MWpeak. With approximately 16,000 modules, the plant will generate nearly 5,500 megawatt hours per year. This corresponds to the average annual electricity demand of more than 1,700 households and is unique in Upper Austria on this scale.

The photovoltaic plant is an important symbolic milestone for Lenzing on its way to becoming a CO2-neutral manufacturing site. This project is part of Lenzing’s global energy concept, which aims to provide electricity from 100 percent renewable sources in order to reduce CO2 intensity by 50 percent already in 2030 and to be globally climate neutral in 2050.

With the industrial use of solar energy, Lenzing sets new standards regarding decarbonization in the fiber industry.

The Lenzing Group plans Upper Austria’s largest ground-mounted photovoltaic plant on an area of around 55,000 m². The groundbreaking ceremony is scheduled to take place in summer 2021. After the expected commissioning in the second half of 2021, the plant's output will amount to 5.5 MWpeak. With approximately 16,000 modules, the plant will generate nearly 5,500 megawatt hours per year. This corresponds to the average annual electricity demand of more than 1,700 households and is unique in Upper Austria on this scale.

The photovoltaic plant is an important symbolic milestone for Lenzing on its way to becoming a CO2-neutral manufacturing site. This project is part of Lenzing’s global energy concept, which aims to provide electricity from 100 percent renewable sources in order to reduce CO2 intensity by 50 percent already in 2030 and to be globally climate neutral in 2050.

"The great challenges of our time need answers. As a leading company in innovation and sustainability, we are proactively contributing to the achievement of climate targets and setting new standards for our industry," explains Stefan Doboczky, CEO of the Lenzing Group. “In addition to ongoing major investments in CO2 neutral sites such as Thailand and Brazil, innovative projects at existing sites are bringing us one step closer to climate neutrality.”

Source:

Lenzing AG

12.01.2021

Kelheim Fibres first viscose manufacturer worldwide with environmental management system validated to EMAS

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

Source:

Kelheim Fibres GmbH

04.12.2020

ANDRITZ to acquire Laroche

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling and decortication of bast fibers. The product portfolio further complements the ANDRITZ Nonwoven product range. ANDRITZ is now able to offer the complete supply and value chain, from the raw material, to opening and blending, web forming, bonding, finishing, drying, and converting. Laroche’s high-performance technologies for opening and blending enhance the ANDRITZ scope of supply for spunlace, needlepunch and wetlaid production lines. Moreover, both companies have agreed to further strengthen the development of their existing technologies for high-speed and high-capacity applications and also to continue pursuing the development of textile recycling processes in order to stay ahead of the changes the industry is facing.

Laroche SA has been developing fiber processing technologies for more than 100 years. With integrated manufacturing, the company supplies lines for a wide range of industries/products: spinning, bedding and furniture, automotive, acoustic and thermal insulation, geotextiles, filtration, wipes, and many more.

Robert Laroche, President of Laroche: “This acquisition is the logical conclusion in view of the successful long-term relationship between ANDRITZ and Laroche. We have been working in close cooperation for more than ten years and are very much looking forward to becoming a member of the ANDRITZ family.”

Andreas Lukas, Senior Vice President and Division Manager, ANDRITZ Nonwoven: “By adding Laroche’s state-of-the-art products and expertise to our existing capabilities, ANDRITZ Nonwoven will further strengthen its market and technology position.”

Source:

ANDRITZ AG

VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen © ITM/TU Dresden
Frau Dipl.-Ing. Philippa Ruth Christine Böhnke im Technikum Bio- und Medizintextilien des ITM
02.12.2020

VDMA-Kreativitätspreis für ITM Nachwuchswissenschaftlerin

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

In ihrer Arbeit entwickelte Frau Böhnke ein neuartiges Verbundmaterial mit einer bioaktiven Materialkomposition zur Reparatur und Regeneration von Knochendefekten, bestehend aus einer Faserverstärkung aus biokompatiblen Kieselgelfasern und einem Matrixmaterial auf Basis medizinischer Klebstoffe mit Calcium-, Natrium- und Phosphoranteilen. Die morphologische und mechanische Charakterisierung der gefertigten Strukturen zeigt im Vergleich zu handelsüblichen Knochenersatzmaterialen eine offenporige Struktur und um ein Vielfaches erhöhte Biegesteifigkeiten und Bruchdehnungen. Diese erzielten Materialeigenschaften entsprechen weitestgehend den realen Knochenstrukturen. Frau Böhnke hat mit ihrer herausragenden kreativen wissenschaftlichen Arbeit einen wichtigen maschinenbaulichen Beitrag in den Disziplinen Faserforschung, Additive Fertigung, Faserverbundtechnologien und Medizintechnik geleistet.

Source:

ITM/TU Dresden

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

Pump components made from zirconium oxide ceramic (c) Oerlikon
Pump components made from zirconium oxide ceramic
12.11.2020

Oerlikon: Robust pumps for sophisticated special fibers

At first glance, rowing boats, the Airbus 380, safety equipment and stadium roofing have very little on common. They receive their specific properties as a result of the use of special fibers, among other things: aramid fibers and carbon fibers are processed into special yarns that are frequently deployed as compound materials. These fibers are growing in demand as the world seeks to reduce its reliance on fossil fuels; new solutions are required to reduce weight and replace heavy metallic parts.

Aramid fibers are produced in a highly-chemical process that is extremely aggressive; the acrylic precursor used to manufacture carbon fibers is a different process, but again no less difficult. In these sophisticated processes, the gear metering pumps are not only responsible for the high-precision control of the melt transport; durability, resistance within aggressive environments and cost efficiency also play decisive roles.

At first glance, rowing boats, the Airbus 380, safety equipment and stadium roofing have very little on common. They receive their specific properties as a result of the use of special fibers, among other things: aramid fibers and carbon fibers are processed into special yarns that are frequently deployed as compound materials. These fibers are growing in demand as the world seeks to reduce its reliance on fossil fuels; new solutions are required to reduce weight and replace heavy metallic parts.

Aramid fibers are produced in a highly-chemical process that is extremely aggressive; the acrylic precursor used to manufacture carbon fibers is a different process, but again no less difficult. In these sophisticated processes, the gear metering pumps are not only responsible for the high-precision control of the melt transport; durability, resistance within aggressive environments and cost efficiency also play decisive roles.

Special materials for special tasks
The process, the expected pump lifespan and the maintenance frequency are the decisive factors for choosing the materials from which the pumps and their components are manufactured. For optimum results, Oerlikon Barmag offers solutions that intelligently combine the various materials and the latest technologies. Whether in the case of surfaces with ceramic coatings, gears and shafts featuring DLC coatings, pumps made from cobalt alloys (StelliteTM) or robust and durable Oerlikon Barmag hybrid constructions comprising zirconium oxide ceramic and duplex stainless steel – the high-precision ZP- and GM-series pumps are design-optimized depending on the intended use. Various seal systems and customized drive concepts round off the pump program.

Source:

Oerlikon

Lenzing reports improved results in the third quarter and remains strategically on course (c) Lenzing
Lenzing reports improved results in the third quarter and remains strategically on course
04.11.2020

Lenzing reports improved results in the third quarter and remains strategically on course

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand.

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs significantly as a result.

Please read the attached document for more information

Source:

Lenzing Aktiengesellschaft

Cetex (c) Cetex
v.l.n.r.: Falk Mehlhorn (Cetex), Florian Mitzscherlich (The FilamentFactory), Matthias Hess (The FilamentFactory), Yasar Kiray (The Filament Factory), Sebastian Iwan (thermoPre ENGINEERING), Sven P. Fritz (The FilamentFactory)
16.10.2020

Cetex: Langfristige Kooperation im Bereich von Hybridrovings

Das Cetex Institut, die thermoPre ENGINEERING GmbH und die The FilamentFactory GmbH kooperieren bei der Entwicklung, Herstellung und Vermarktung neuartiger Hybridmaterialien. Der am 2. Oktober 2020 in Chemnitz gemeinsam unterzeichnete Kooperationsvertrag hebt die Zusammenarbeit auf eine neue Stufe. „Wir freuen uns, dem Endanwender die Hybridrovings nicht nur anwendungsangepasst liefern zu können, sondern auch das Engineering für spätere Bauteilanwendungen inklusive dem Prototyping der FKV-Bauteile anzubieten“, so Sebastian Nendel, geschäftsführender Direktor des Cetex Institutes.

Das Cetex Institut, die thermoPre ENGINEERING GmbH und die The FilamentFactory GmbH kooperieren bei der Entwicklung, Herstellung und Vermarktung neuartiger Hybridmaterialien. Der am 2. Oktober 2020 in Chemnitz gemeinsam unterzeichnete Kooperationsvertrag hebt die Zusammenarbeit auf eine neue Stufe. „Wir freuen uns, dem Endanwender die Hybridrovings nicht nur anwendungsangepasst liefern zu können, sondern auch das Engineering für spätere Bauteilanwendungen inklusive dem Prototyping der FKV-Bauteile anzubieten“, so Sebastian Nendel, geschäftsführender Direktor des Cetex Institutes.

Patentiertes Verfahren zur Herstellung von Hybridrovings
Das Cetex Institut hat in den letzten 3 Jahren eine Anlagentechnologie zur Herstellung von Hybridrovings entwickelt. Durch das patentierte Verfahren können kundenspezifisch verschiedene Materialkombinationen hergestellt werden. Dabei können Materialkombinationen aus Verstärkungsfasern (Glas, Basalt, Carbon, Aramid oder hochfesten Polymerfasern) mit Matrixfasern (PP, PET, PA, PPS, PEEK) kombiniert werden, aber auch Spezialkombinationen aus unterschiedlichen Verstärkungsfasern oder der Kombination von Verstärkungsfasern mit Metallfasern. Vorteile des neuartigen Hybridrovings sind die drehungsfreie und vollständig gestreckte Faserlage und die damit verbundene optimale Eigenschaftsausnutzung der Verstärkungsfasern, wie auch eine sehr gute Homogenität, wodurch in späteren Prozessschritten eine hervorragende Verarbeitung erzielt werden kann.

Serienproduktion als nächsten Schritt
Das nächste Ziel ist klar gesetzt: Im Rahmen der Vereinbarung soll das Verfahren durch die Projektpartner gemeinsam weiterentwickelt und bis zur Serienproduktion überführt werden. Diese gemeinsamen Aktivitäten bilden die Basis für eine langjährige intensive Zusammenarbeit auf diesem neuen Gebiet.

Source:

Cetex Institut gGmbH

Hohenstein: Dr. Jasmin Jung (c) Hohenstein
Hohenstein: Dr. Jasmin Jung
08.10.2020

Hohenstein Forscherin mit Preis ausgezeichnet

Im Rahmen der Chemiefasertagung Dornbirn wurde der renommierte Paul Schlack/Wilhelm Albrecht Preis an die Hohenstein Forscherin Dr. Jasmin Jung für ihre Dissertation im Bereich Mikroplastikforschung verliehen. Betreut wurde die Arbeit von Prof. Dr. Jochen Gutmann vom Institut für Physikalische Chemie an der Universität Duisburg-Essen. Die Verleihung des Preises fand, wie auch alle Vorträge und Diskussionen des Kongresses, in diesem Jahr online und in Form von Webinaren statt. Die frischgebackene Preisträgerin bedankte sich ebenfalls online für die Ehrung und die Unterstützung, die sie bei der Forschung im Rahmen ihrer Dissertation erhielt.

Im Rahmen der Chemiefasertagung Dornbirn wurde der renommierte Paul Schlack/Wilhelm Albrecht Preis an die Hohenstein Forscherin Dr. Jasmin Jung für ihre Dissertation im Bereich Mikroplastikforschung verliehen. Betreut wurde die Arbeit von Prof. Dr. Jochen Gutmann vom Institut für Physikalische Chemie an der Universität Duisburg-Essen. Die Verleihung des Preises fand, wie auch alle Vorträge und Diskussionen des Kongresses, in diesem Jahr online und in Form von Webinaren statt. Die frischgebackene Preisträgerin bedankte sich ebenfalls online für die Ehrung und die Unterstützung, die sie bei der Forschung im Rahmen ihrer Dissertation erhielt.

Dr. Jung entwickelte im Rahmen ihrer Dissertation „Etablierung und Anwendung der dynamischen Bildanalyse zur Bestimmung von Fasern in Abwässern aus Textilwaschprozessen“ eine völlig neuartige Analysemethode zur Bestimmung von Fasern in Abwässern aus gewerblichen Wäschereien. Dabei sind synthetische Textilfasern eine häufig vorkommende Art von Mikroplastik, die über die Textilwäsche in aquatische Lebensräume eingetragen werden. Welche Faktoren die Faserfreisetzung während der (gewerblichen) Wäsche bedingen, ist nach aktuellem Stand noch unzureichend erforscht. Studien konzentrierten sich bislang hauptsächlich auf den Einfluss der Haushaltswäsche. Dr. Jung etablierte das neue Analyseverfahren für Synthesefasern wie z.B. Polyester und Baumwolle sowie deren Mischungen mithilfe von Waschverfahren und Bekleidungstextilien, so wie sie in der Praxis in gewerblichen Wäschereien aufbereitet werden. Mithilfe der entwickelten Methode können auch für Mischgewebe die Anteile an Polyester und Baumwolle bezogen auf den Gesamtabrieb differenziert werden. Wie sich bei Versuchen für zwei Mischgewebe aus 50/50 Prozent und 65/35 Prozent Polyester/Baumwolle zeigte, waren im Abwasser überwiegend Baumwollfasern nachweisbar (ca. 90 Prozent). Der Abrieb enthielt nur einen geringen Anteil an Polyesterfasern (ca. 10 Prozent).

Der Paul Schlack/Wilhelm Albrecht Preis wird im Rahmen der Dornbirn GFC Global Fiber Convention in Dornbirn (Österreich) zur Förderung der Chemiefaserforschung an Hochschulen und Forschungsinstituten für herausragende Arbeiten und Forschungsprojekte verliehen.

Source:

Hohenstein

Composites United stellt mit Roy Thyroff die Weichen für die Zukunft im Bau
Roy Thyroff
01.09.2020

Composites United stellt Roy Thyroff als Geschäftsführer vor

  • Gestärkt in die Zukunft der Faserverbundanwendungen im Bauwesen

Das Fachnetzwerk CU Bau des Composites United e.V. stellt für die Entwicklung zum internationalen Verband strategische Weichen. Für den Einsatz von faserverstärkten Werkstoffen im Bauwesen konnte der erfahrene und in der Branche gut vernetzte Textil-Beton-Visionär Roy Thyroff ab September 2020 als Geschäftsführer gewonnen werden.

Bis 2019 widmete sich der Technische Betriebswirt und Industriemeister Textil als Geschäftsführer dem Aufbau der V. Fraas Solutions in Textile GmbH, entwickelte u.a. Maschinen- und Anlagentechnologien für die Herstellung und Weiterverarbeitung von Technischen Textilien, Textilbewehrungen und Carbon-Bewehrungen. Seit Juni 2019 ist er mit der Firma rothycon entlang der gesamten textilen Wertschöpfungskette aktiv. Von 2012 bis 2019 war Roy Thyroff außerdem Verbandsgeschäftsführer des Tudalit e.V., bis er Ende Juni 2019 in den Vorstand gewählt wurde.

  • Gestärkt in die Zukunft der Faserverbundanwendungen im Bauwesen

Das Fachnetzwerk CU Bau des Composites United e.V. stellt für die Entwicklung zum internationalen Verband strategische Weichen. Für den Einsatz von faserverstärkten Werkstoffen im Bauwesen konnte der erfahrene und in der Branche gut vernetzte Textil-Beton-Visionär Roy Thyroff ab September 2020 als Geschäftsführer gewonnen werden.

Bis 2019 widmete sich der Technische Betriebswirt und Industriemeister Textil als Geschäftsführer dem Aufbau der V. Fraas Solutions in Textile GmbH, entwickelte u.a. Maschinen- und Anlagentechnologien für die Herstellung und Weiterverarbeitung von Technischen Textilien, Textilbewehrungen und Carbon-Bewehrungen. Seit Juni 2019 ist er mit der Firma rothycon entlang der gesamten textilen Wertschöpfungskette aktiv. Von 2012 bis 2019 war Roy Thyroff außerdem Verbandsgeschäftsführer des Tudalit e.V., bis er Ende Juni 2019 in den Vorstand gewählt wurde.

CU Bau agiert für das Ziel, die gesamte Bauwirtschaft – von Bauherren über Architekten und Planern bis hin zu Zulassungsstellen sowie Bauunternehmen – mit Informationen und gut aufbereitetem, praxisorientiertem Wissen zu Bauprodukten mit faserverstärkter Beton- und Polymermatrix zu versorgen. Damit diese optimal, materialgerecht und mit entsprechenden Zulassungen einsetzt werden können. Schon heute treibt der CU Bau als überregionales Fachnetzwerk des international vernetzten Composites United e.V. für die ca. 400 Mitglieder aus Industrie und Wissenschaft die Akzeptanz und den flächendeckenden Einsatz von faserverstärkten Werkstoffen im Bauwesen voran.

Source:

bm CONSULTING Communication & PR

 Lenzing investiert EUR 40 Mio. in weitere Verbesserung des ökologischen Fußabdrucks am Standort Lenzing (c) Lenzing AG
09.10.2019

Lenzing invests EUR 40 mn to further improve the ecological footprint of the Lenzing site

  • Construction of a new air purification and sulfur recovery plant
  • Further improvement of the exhaust emission values at the Lenzing site
  • Important step in achieving the CO2 targets of the Lenzing Group

Lenzing – The Lenzing Group is a global leader in the climate-friendly and sustainable production of wood-based textile fibers. Lenzing announced its climate targets in August of this year. By 2030, the company aims to reduce its specific CO2 emissions per ton of manufactured pulp and fibers by 50 percent. By the year 2050, the Lenzing Group will no longer generate any net CO2 emissions.

Lenzing‘s Management Board has now resolved to invest EUR 40 mn to expand the production of the raw material sulfuric acid at the Lenzing site. This comprises an important milestone on the path towards climate neutrality. In the future, a new air purification and sulfur recovery plant will not only optimize the company’s self-sufficiency for this raw material and enhance process reliability but improve environmental protection within the context of a clear forward-looking strategy.

  • Construction of a new air purification and sulfur recovery plant
  • Further improvement of the exhaust emission values at the Lenzing site
  • Important step in achieving the CO2 targets of the Lenzing Group

Lenzing – The Lenzing Group is a global leader in the climate-friendly and sustainable production of wood-based textile fibers. Lenzing announced its climate targets in August of this year. By 2030, the company aims to reduce its specific CO2 emissions per ton of manufactured pulp and fibers by 50 percent. By the year 2050, the Lenzing Group will no longer generate any net CO2 emissions.

Lenzing‘s Management Board has now resolved to invest EUR 40 mn to expand the production of the raw material sulfuric acid at the Lenzing site. This comprises an important milestone on the path towards climate neutrality. In the future, a new air purification and sulfur recovery plant will not only optimize the company’s self-sufficiency for this raw material and enhance process reliability but improve environmental protection within the context of a clear forward-looking strategy.

Improved exhaust emission performance

The new plant represents an important contribution towards implementing the sustainability strategy of the Lenzing Group, and also helps to ensure an even higher level of environmental compatibility of all production operations at the Lenzing site. The application of state-of-the-art technologies will further improve exhaust emission values. Furthermore, the new facility will help further reduce the use of fossil fuels by generating steam which will, in turn, be converted into electricity. In this way, it will also support the energy self-sufficiency of the company’s operations in Lenzing.

Improved CO2 scorecard

As a result, the production plant in Lenzing will reduce its annual CO2 emissions by 15,000 tons. This is an important step towards further advancing the company’s ambitious plans in the coming years and also strengthen Lenzing’s leadership role as a driver of ecologically sustainable industry. “On the basis of these investments, Lenzing is taking the next step in achieving its climate targets. At the same time, it will also reach a significantly higher level of autonomy with respect to a vital raw material”, states Stefan Doboczky, Chief Executive Officer of Lenzing.

More information:
Lenzing Group Nachhaltigkeit Fasern
Source:

Lenzing AG