From the Sector

Reset
390 results
Biella Yarn presents new Fall/Winter 24/25 collection (c) Südwolle Group
28.07.2023

Biella Yarn presents new Fall/Winter 24/25 collection

Biella Yarn’s new Fall/Winter 24/25 collection presents two collaborations. Both collaborations start with one common inspiration: with the clash of different cultures and the distant exotic markets. Rug making, fur-crafts and artisan hand work inspire patterns and textures which are translated into knitted fabrications and 3D designs.

MRC Knitwear Research Lab created these textures and patterns by using a small selection of very classic yarns and working them in special techniques to create rich textural fabrications. Each garment focuses on a special technique and combination of yarns and colours and show how versatile a single yarn can be.

Biella Yarn’s new Fall/Winter 24/25 collection presents two collaborations. Both collaborations start with one common inspiration: with the clash of different cultures and the distant exotic markets. Rug making, fur-crafts and artisan hand work inspire patterns and textures which are translated into knitted fabrications and 3D designs.

MRC Knitwear Research Lab created these textures and patterns by using a small selection of very classic yarns and working them in special techniques to create rich textural fabrications. Each garment focuses on a special technique and combination of yarns and colours and show how versatile a single yarn can be.

The garments were knitted mainly with Victoria Nm 2/30 (100% Merino wool extrafine, 19.5 μ, anti-shrinkage). Victoria Nm 2/30 was used in an array of different techniques and on different gauges - from 14gg ribs, that have a beautiful drape to more tactile fabrics such as 3-dimensional stitches on 12gg and heavily patterned inlay jacquards on the 14gg Shima Seiki SRY. Within these inlay jacquard’s BaltoroPro Nm 2/28 (70% Merino wool extrafine, 19.5 μ, anti-shrinkage 30% Polyester GRS High Bulk) was selected as an inlay yarn - a special wool blend which helps create bulky 3-dimensional fabrications that remain lightweight. The classic Brisbane Nm 2/60 (100% Merino wool Superfine, 17.5 μ, anti-shrinkage) and new boucle yarn Fluffy Nm 14 000 (81% Merino wool extrafine, 19.5 μ, anti-shrinkage, 19% Polyamide) were worked together in fine plush jacquards to give an effect of shaved patchwork furs.

The structures and patterns were transitioned into the world of 3D designs by Shima Seiki Italia. The design software APEXFiz®, developed by Shima Seiki, not only allows for shaping but also converts them into knitted patterns. By replacing physical samples, virtual samples reduce time costs, and materials that would otherwise be wasted. Yarnbank®, Shima Seiki's platform for yarn and spinning research, has been the primary source of Suedwolle Group's digitized yarns used in the 3D models.

Source:

Südwolle Group

28.07.2023

adidas: Further release of existing Yeezy products

adidas announced a further release of YEEZY inventory with a range of existing products being available in phases throughout the month of August across the world. As previously communicated, adidas will donate a significant amount to selected organizations working to combat discrimination and hate, including racism and antisemitism.

As with the release in May 2023, the second release will feature products which were initiated in 2022. The range available will include some of the most popular existing designs including the YEEZY BOOST 350 V2, 500 and 700 as well as the YEEZY SLIDE and FOAM RNR.

adidas will continue the support of partners combatting discrimination and hate with donations to existing and new partners. The company will continue to support the work of the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change. In addition, adidas is proud to partner with Robert Kraft’s Foundation to Combat Antisemitism (FCAS) to fight all forms of hate.

adidas announced a further release of YEEZY inventory with a range of existing products being available in phases throughout the month of August across the world. As previously communicated, adidas will donate a significant amount to selected organizations working to combat discrimination and hate, including racism and antisemitism.

As with the release in May 2023, the second release will feature products which were initiated in 2022. The range available will include some of the most popular existing designs including the YEEZY BOOST 350 V2, 500 and 700 as well as the YEEZY SLIDE and FOAM RNR.

adidas will continue the support of partners combatting discrimination and hate with donations to existing and new partners. The company will continue to support the work of the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change. In addition, adidas is proud to partner with Robert Kraft’s Foundation to Combat Antisemitism (FCAS) to fight all forms of hate.

To create further impact adidas will show support for the Foundation to Combat Antisemitism by including blue square pins with selected products sold directly by adidas in North America. These blue square pins were established by FCAS through their #StandUpToJewishHate campaign launched earlier this year, as the universal symbol for standing in solidarity and unity in the fight against antisemitism and all hate.

Since terminating the YEEZY partnership in October, adidas has been exploring multiple scenarios for the potential use of the existing YEEZY inventory. The process involved seeking feedback and listening to a diverse group of employees, organizations, communities, and consumers for how to responsibly manage the existing product.

More information:
adidas Sportswear
Source:

adidas AG

PrimaLoft expands Active Insulation Range (c) PrimaLoft, Inc.
28.07.2023

PrimaLoft expands Active Insulation Range

PrimaLoft, Inc., a leader in advanced material technology, is expanding its  Active Insulation Range by adding four new Active Evolve styles, reaffirming its commitment to providing cutting-edge solutions that meet the evolving needs of consumers.

Originally launched in 2018, PrimaLoft Active Evolve is a line of insulating fabrics that is designed to evolve performance, design, and sustainability. Combining the lightweight warmth of insulation with the breathability of fabric, this technology is developed to perform in a wide range of activities, regardless of intensity or season. From pushing yourself during a cross country ski tour, to working up a sweat hiking to the next peak, PrimaLoft Active Evolve keeps you in your comfort zone – even when you’re pushing yourself out of it.

PrimaLoft, Inc., a leader in advanced material technology, is expanding its  Active Insulation Range by adding four new Active Evolve styles, reaffirming its commitment to providing cutting-edge solutions that meet the evolving needs of consumers.

Originally launched in 2018, PrimaLoft Active Evolve is a line of insulating fabrics that is designed to evolve performance, design, and sustainability. Combining the lightweight warmth of insulation with the breathability of fabric, this technology is developed to perform in a wide range of activities, regardless of intensity or season. From pushing yourself during a cross country ski tour, to working up a sweat hiking to the next peak, PrimaLoft Active Evolve keeps you in your comfort zone – even when you’re pushing yourself out of it.

Several products in the Active Evolve line can be used as a next-to-skin fabric. This enables brands to forego liner fabrics, which means heat and moisture are more efficiently managed, breathability is supported, and user comfort is maintained. In addition to achieving optimal performance during aerobic activity, this yields a wider utility and year-round use, all while allowing brands to use less overall material when designing a garment, reducing footprint and waste.

PrimaLoft Active Evolve offers several advantages to designers. It enables them to utilize the full spectrum of color, incorporate unique patterns, and provides greater flexibility in fabric selection. Additionally, Active Evolve eliminates the need for quilting in the design process. Products within the Active Evolve line are made from up to 100% post-consumer recycled content, including three of the four new styles.

With more than a dozen brand adoptions thus far, PrimaLoft Active Evolve’s adaptability for the user, range of use across activities, and seasonal timing, is quickly making this one of the most versatile products in the PrimaLoft portfolio. For Fall/Winter 2023-2024, key partner brands beside Sitka and Löffler will include CP Company, Eddie Bauer, Endura, Martini Sportswear, OMM, Quiksilver, Ziener and more.

Source:

PrimaLoft, Inc.

(c) adidas AG
28.07.2023

adidas: Y-3 returns with Fall/Winter 2023 Chapter 3 collection

In Fall/Winter 2023, Y-3 (partnership between adidas and Yohji Yamamoto) returns to present the third chapter of its year long exploratory narrative – with the subversive label taking athletic iconography, silhouettes, and materials and recontextualising them through through the lens of Yohji Yamamoto’s renegade design vision.

Inspired by adidas’ inimitable sporting legacy, Chapter 3’s apparel collection sees Y-3 evolve the collegiate motifs of previous seasons, for an entirely new context. Drawing on vintage varsity style lettering, an array of graphics are applied to jackets, t-shirts, and hoodies, in kettle stitch embroidery, chenille patches, puff prints, and engineered knits. A curated offering of quilted pieces, with cutlines inspired by the adidas Originals Aloxe tracksuit, completes the apparel highlights with a selection of jackets, vests, skirts, and pants.  

The collection is then rounded out by a host of bold accessories including elevated totes, gym bags, backpacks, body bags, knit beanies, caps, and more.  

In Fall/Winter 2023, Y-3 (partnership between adidas and Yohji Yamamoto) returns to present the third chapter of its year long exploratory narrative – with the subversive label taking athletic iconography, silhouettes, and materials and recontextualising them through through the lens of Yohji Yamamoto’s renegade design vision.

Inspired by adidas’ inimitable sporting legacy, Chapter 3’s apparel collection sees Y-3 evolve the collegiate motifs of previous seasons, for an entirely new context. Drawing on vintage varsity style lettering, an array of graphics are applied to jackets, t-shirts, and hoodies, in kettle stitch embroidery, chenille patches, puff prints, and engineered knits. A curated offering of quilted pieces, with cutlines inspired by the adidas Originals Aloxe tracksuit, completes the apparel highlights with a selection of jackets, vests, skirts, and pants.  

The collection is then rounded out by a host of bold accessories including elevated totes, gym bags, backpacks, body bags, knit beanies, caps, and more.  

Having traversed Yohji Yamamoto’s homeland of Japan for the brand’s Spring/Summer 2023 campaigns, the seasonal story journeys to adidas’ mother country of Germany, to capture Berlin’s unique, energetic, and prolific creative community. Shot by local photographer, Lengua, and motion director Thyago Sainte, the stills, moving images, and short film spotlight an enigmatic cast of musical figures that call Berlin home in personally resonant locations.

More information:
adidas Sportswear
Source:

adidas AG

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS (c) Iluna Group
24.07.2023

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Corè
Luisa Amman, born in the late 19th century into a wealthy bourgeois family, married at a young age and became Marchesa Casati. "Corè" is the endearing nickname given to her by her lover Gabriele D'Annunzio, inspired by Kore, the Queen of the Underworld. She was a patron of the arts, an eccentric and transgressive collector. This theme celebrates opulence, from peacock feathers to Liberty-style designs in deep colours and warm metallic glimmers. An innovative proposal for the theme is the pleating technique, achieved directly in the weaving process of the Ultralight jacquardtronic laces.

Miss Viv
Vivienne Westwood, an extraordinary protagonist with an intense and irreverent life. Her insights have forever marked fashion and transformed the general standards of dressing. Rock and rebellious, she drew inspiration from street trends, anticipating avant-garde movements. In the 1990s, she brought back Tartan, mixing it with sensual roses in a maximalism that went against the prevailing trends, featuring vibrant colours. At the beginning of the third millennium, she grasped the importance of preserving the planet and left us with a motto that is more urgent and relevant than ever: "Buy Less, Choose Well, Make it Last." Within this theme, there is a new GRS-certified print that saves water, applied to ultra-fine Lurex nets, which are also certified.

Source:

Iluna Group

21.07.2023

Digital Textile Printing: Direct-to-Film Technology

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

Direct-to-film vs. Screen Printing
Direct-to-film printing is the process of digitally printing directly onto a special transfer film sheet. The printed film is subsequently sprinkled with a hot-melt powder and heated. Once the transfer sheet is cured and dried, it can be heat-pressed onto a variety of fabrics to create premium transferred designs for customised merchandising, sportswear, and an array of other promotional applications for the textile market. Compared with traditional screen printing, the plate creation required for that process is far too time-consuming. Not only this, but it does not match direct-to-film’s ability to produce vivid colours and quality details such as shapes, lettering, and motifs often sought after in the promotional and merchandising space for bespoke textiles.

The Mimaki TxF150-75
Mimaki’s first direct-to-film inkjet printer is the TxF150-75, a fitting extension to the 150 series, with a maximum printing width of 80cm. Offering a stable printing plotter, the model’s built-in ink circulation system and degassed ink pack are resolutions to common direct-to-film challenges such as poor ink ejection and white ink clogging. The new printer also includes core Mimaki features including NCU (Nozzle Check Unit) and NRS (Nozzle Recovery System) for stable, uninterrupted print production. Operating in harmony with the textile printer itself is Mimaki’s ECO PASSPORT by OEKO-TEX® certified water-based pigment textile inks, formulated especially for the TxF150-75. Coupled with Mimaki’s RasterLink7 RIP software, users are offered end-to-end oversight and efficiency from creative design to final product.

In addition, and in line with Mimaki’s collaborative approach to meeting customer needs, Adkins has developed an 80cm wide powder shaker cure unit to complete this ‘A brand’ direct-to-film printing solution. By offering the printer and post-processing unit at 80cm wide, customers can print larger garments with less waste and quicker production times, making the process much more cost effective.

Premium, Seek (c) Premium Exhibitions GmbH
13.07.2023

PREMIUM and SEEK: A new heartbeat

The PREMIUM and SEEK teams around Anita Tillmann and Jörg Arntz prove their skills with the success of the new Trend and Event Platform. The format, newly shortened to just two days, showed a total of 450 curated, international brands of the new generation, with 250 brands at PREMIUM and 200 brands at SEEK. The motto was quality over quantity. In addition to the brands, the focus was clearly on the know-how of experts from sustainability, tech, and business. If you didn't discover or learn anything new in the last two days you missed out. Visitors from all over the world came to Station Berlin to see what the Premium Group had come up with for this edition - and it did not disappoint.

PREMIUM reinvents itself
The newly curated brand portfolio with many international and unexposed brands were very well received by the community and invited buyers and visitors to explore a diverse, exciting, and coherent brand landscape. The atmosphere was characterised by lightness, lots of sunshine, and good conversations.

The PREMIUM and SEEK teams around Anita Tillmann and Jörg Arntz prove their skills with the success of the new Trend and Event Platform. The format, newly shortened to just two days, showed a total of 450 curated, international brands of the new generation, with 250 brands at PREMIUM and 200 brands at SEEK. The motto was quality over quantity. In addition to the brands, the focus was clearly on the know-how of experts from sustainability, tech, and business. If you didn't discover or learn anything new in the last two days you missed out. Visitors from all over the world came to Station Berlin to see what the Premium Group had come up with for this edition - and it did not disappoint.

PREMIUM reinvents itself
The newly curated brand portfolio with many international and unexposed brands were very well received by the community and invited buyers and visitors to explore a diverse, exciting, and coherent brand landscape. The atmosphere was characterised by lightness, lots of sunshine, and good conversations.

For the first time, PREMIUM and the Fashion Council Germany joined forces to present the showroom "CURATED by Fashion Council Germany" with avant-garde designers from Germany and Ukraine. The tech format Yonnaverse addressed the most important innovations for profitability and sustainable growth through digital progress. The event took place physically, digitally, and in the Metaverse.

Iranian artist and milliner Maryam Keyhani showed what surrealism marketing and tangible art can look like with her oversized hat, which floated happily over the grounds and caused surprised faces. The installation by the Italian designer Innerrraum from Berlin was dedicated to Anita Tillmann in gratitude for her international success. Artists such as Sophie Douala from France, Claudia Gillies from New Zealand, and Grycja Erde from Ukraine were a welcome addition in making the PREMIUM visit an experience.

The diverse portfolio also included a range of beauty brands and the beauty lounge offered much-loved make-up, hair and nail touch ups. There were also many new things to discover in the retail sphere. Vintage & Rags presented a new retail concept for second-hand fashion and SPSR showed how to take retail entertainment to the next level through unique live consumer engagement. On the Content Cube stage, Daniel Steindorf, the former owner of Überfahrt, spoke with Inga Klaassen from J'N'C about hospitality fusion, community, and retail, next to other speakers.

SEEK put a stronger focus on sustainability
As in previous editions, a relaxed and positive mood prevailed at SEEK. The community was happy to finally fall into each other's arms again. SEEK convinced with high-quality and original brands and an even stronger focus on sustainability. For the first time, SEEK's brand portfolio consisted of 50% sustainable brands, further strengthening the Conscious Club and allowing it to flourish. The Conscious Club was supported by the sustainability experts from studio MM04, whose 202030 - The Berlin Fashion Summit Denim Pop-up ensured a full Content Cube.

Decision-makers and fashion professionals discussed the learnings of the denim transformation, the new green claims of the EU textile strategy as well as pragmatic solutions on how to remain and act more sustainable and competitive as an industry and individual brand. As a counterpart to Black Friday, Cold Friday, initiated by Dojo Cares, was presented as the "biggest awareness campaign since sales days have existed". Fair fashion and fair working conditions were the focus of the final conference of the "Good Clothes Fair Pay" press conference by Fashion Revolution, which was also part of the Conscious Club. On top of a lot of sustainability inspiration, for the first time there was a space for D2C brands such as VGB and ADR Atelier Roupa, who were involved both as brands and as speakers in the content programme. For two days, two stages were filled with talks and panels with the most relevant themes from fashion, lifestyle, culture and business. Gen Z, Gen Y and Gen Alpha met for espresso martinis and club culture vibes at "Platte raves the Ground" to discover and stage the coolest styles of the scene.

More information:
PREMIUM SEEK
Source:

Premium Exhibitions GmbH

Wedding Dress Design with Stratasys’ 3DFashion Technology (c) Stav Peretz
12.07.2023

Wedding Dress Design with Stratasys’ 3DFashion Technology

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

The wedding dresses feature complex geometrical shapes, depicting the ‘Flower of Life’, a sacred geometry dating back to ancient Egypt. The intricate pattern is composed of overlapping circles that intersect to form flowers, which Ada Hefetz has combined with her design of a lily to symbolize the union between two individuals and the circle of life. The inspiring design uses Stratasys’ translucent VeroVivid™ resin material with Stratasys’ J850™ TechStyle™ 3D printer, which can be printed in over 500,000 unique colors with varying levels of flexibility, simulating different textures and finishes.

Ada Hefetz’s Flower of Life-themed 3D printed wedding dresses are currently on display at Milan’s D-House Urban Laboratory, which is owned and managed by Dyloan, the leading Italian manufacturer serving the high-end fashion sector.

More information:
Stratasys 3D printing materials
Source:

Stratasys

Archroma and swatchbook collaborate to deliver digital colors to fashion designers Photo: Archroma
07.07.2023

Archroma and swatchbook collaborate to deliver digital colors to fashion designers

Archroma is bringing the entire portfolio of 5,760 Archroma Color Atlas colors to swatchbook, a platform for material digitalization and sourcing.

The new partnership provides fashion, apparel and textile designers and manufacturers with an elevated standard for color accuracy that meets the needs of today’s increasingly technology-driven and integrated supply chain. This will help the textile and fashion community to improve sustainability, whilst lowering costs and shortening turnaround times.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Designers will use the 5,760 Archroma Color Atlas colors on swatchbook to rapidly develop accurate digital colorways and visualize their final product. They can then share these digital swatches with their manufacturing partners, providing access to the swatchbook metadata, which can include information such as the materials’ composition, weight and color.

Archroma is bringing the entire portfolio of 5,760 Archroma Color Atlas colors to swatchbook, a platform for material digitalization and sourcing.

The new partnership provides fashion, apparel and textile designers and manufacturers with an elevated standard for color accuracy that meets the needs of today’s increasingly technology-driven and integrated supply chain. This will help the textile and fashion community to improve sustainability, whilst lowering costs and shortening turnaround times.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Designers will use the 5,760 Archroma Color Atlas colors on swatchbook to rapidly develop accurate digital colorways and visualize their final product. They can then share these digital swatches with their manufacturing partners, providing access to the swatchbook metadata, which can include information such as the materials’ composition, weight and color.

This will streamline the overall design and production process for color-critical fashion and textile products, allowing for faster turnaround. Digital materials supported by trusted coloration technology also reduce the need for samples and eliminate physical swatchbooks, bringing environmental benefits and lower costs to brands and suppliers.

All 5,760 Color Atlas by Archroma® colors are now available free of charge to subscribers on the swatchbook platform.

(c) adidas AG
28.06.2023

adidas Originals and KSENIASCHNAIDER present Collaborative Collection

This season, adidas Originals and the progressive Ukrainian label KSENIASCHNAIDER have come together to present a collaborative collection featuring a host of unconventional garments, footwear, and accessories.

Founded in 2011 by Ksenia and Anton Schnaider, KSENIASCHNAIDER is a Kyiv-based independent fashion house centered on creating boundary pushing ready-to-wear, denim, and upcycled apparel and accessories. Drawing on Ksenia’s design language and Anton’s engineering logic, the partners’ eponymous label continues to challenge established conventions to boldly project a new vision of the future.

The collection is anchored by a host of garments which blend the Ukrainian house’s signature aesthetic with adidas’ instantly recognizable brand codes. First, an array of denim pieces – including jeans, jackets, and shirt dresses – are elevated with frayed edges, voluminous cuts, and idiosyncratic details. Second, fresh takes on a timeless adidas classic stand out as adiColor tracksuits, corsets, and dresses are reworked in a patchwork finish.

The adidas Originals x KSENIASCHNAIDER collection launches on July 1st.

This season, adidas Originals and the progressive Ukrainian label KSENIASCHNAIDER have come together to present a collaborative collection featuring a host of unconventional garments, footwear, and accessories.

Founded in 2011 by Ksenia and Anton Schnaider, KSENIASCHNAIDER is a Kyiv-based independent fashion house centered on creating boundary pushing ready-to-wear, denim, and upcycled apparel and accessories. Drawing on Ksenia’s design language and Anton’s engineering logic, the partners’ eponymous label continues to challenge established conventions to boldly project a new vision of the future.

The collection is anchored by a host of garments which blend the Ukrainian house’s signature aesthetic with adidas’ instantly recognizable brand codes. First, an array of denim pieces – including jeans, jackets, and shirt dresses – are elevated with frayed edges, voluminous cuts, and idiosyncratic details. Second, fresh takes on a timeless adidas classic stand out as adiColor tracksuits, corsets, and dresses are reworked in a patchwork finish.

The adidas Originals x KSENIASCHNAIDER collection launches on July 1st.

Source:

adidas AG

21.06.2023

IFCO to be held in Istanbul from 9-11 August 2023

From 9 to 11 August 2023, IFCO, Istanbul Fashion Connection will be held for the fourth time at the Istanbul Expo Center at 6 Halls. The fashion fair is organised by ITKIB Fairs, a subsidiary of Istanbul Apparel Exporter's Association, the umbrella organisation of the Turkish fashion and apparel industry.

IFCO has developed into a hub for fashion enthusiasts, designers, buyers and trendsetters and has established itself as an important international platform for the global fashion industry. IFCO brings together around 400 exhibitors from all product groups of the apparel and fashion industry under one roof in six clearly structured halls: womenswear, menswear, childrenswear, denim, sportswear, evening and occasion wear, bridal wear, lingerie, hosiery, leather and fur, shoes and accessories.

From high-end tailoring to streetwear and sustainable fashion, the fair will present a wide range of styles and trends. IFCO Brands present market leaders such as İpekyol, Climber, Damat, Kiğılı, B&G Store, Lufian, Jakamen, NaraMaxx, Giovane Gentile and Lee Cooper using IFCOto further expand their international network.

From 9 to 11 August 2023, IFCO, Istanbul Fashion Connection will be held for the fourth time at the Istanbul Expo Center at 6 Halls. The fashion fair is organised by ITKIB Fairs, a subsidiary of Istanbul Apparel Exporter's Association, the umbrella organisation of the Turkish fashion and apparel industry.

IFCO has developed into a hub for fashion enthusiasts, designers, buyers and trendsetters and has established itself as an important international platform for the global fashion industry. IFCO brings together around 400 exhibitors from all product groups of the apparel and fashion industry under one roof in six clearly structured halls: womenswear, menswear, childrenswear, denim, sportswear, evening and occasion wear, bridal wear, lingerie, hosiery, leather and fur, shoes and accessories.

From high-end tailoring to streetwear and sustainable fashion, the fair will present a wide range of styles and trends. IFCO Brands present market leaders such as İpekyol, Climber, Damat, Kiğılı, B&G Store, Lufian, Jakamen, NaraMaxx, Giovane Gentile and Lee Cooper using IFCOto further expand their international network.

THE CORE ISTANBUL, successfully launched at IFCO in February, once again features a fascinating mix of established and emerging important Turkish designerswith their creative and innovative creations.

One focus of the fair will be the topic of sustainability. Companies will show their innovations. Ekoteks, the association's sustainability laboratory, supports the development of sustainable production and will also have a stand at IFCO to present the latest developments in this area.

The extensive supporting program with fashion shows and trend zones inspires visitors with the latest fashion trends and styles, while the seminars and workshops address current topics in the fashion industry such as digital transformation, smart clothing, technical textiles and sustainability.

30,000 visitors from more than 100 countries are expected at the upcoming IFCO, mainly from the EU, UK, Eastern Europe, CIS, North Africa, Middle East and the USA. The show also offers networking events, such as B2B Speed Dating, which brings together fashion designers, brands, manufacturers, buyers and industry experts to exchange ideas and forge potential business relationships. This is an important aspect of the fair that has helped to position Istanbul Fashion Connection as a key meeting place for the fashion industry.

Source:

IFCO by ITKIB Fairs / JANDALI

(c) adidas AG
09.06.2023

adidas x Bogey Boys Collection reimagines Classic Golf Style

adidas and Bogey Boys are introducing the adidas x Bogey Boys collection featuring crisp designs and high-quality performance materials that combine vintage styles from golf and tennis with a modern feel, all for easy on- and off-course wear. The limited-edition capsule featuring apparel and footwear for men and women will be available at select locations beginning Wednesday, June 14.

The adidas x Bogey Boys capsule introduces classic, clean, and sporty designs that give golfers the chance to express their style.  In refined white, altered blue and collegiate green colorways, pieces from the collection include:

adidas and Bogey Boys are introducing the adidas x Bogey Boys collection featuring crisp designs and high-quality performance materials that combine vintage styles from golf and tennis with a modern feel, all for easy on- and off-course wear. The limited-edition capsule featuring apparel and footwear for men and women will be available at select locations beginning Wednesday, June 14.

The adidas x Bogey Boys capsule introduces classic, clean, and sporty designs that give golfers the chance to express their style.  In refined white, altered blue and collegiate green colorways, pieces from the collection include:

  • Two four-button placket polos with a higher collar stand
  • A striped silhouette as well as a solid pique option with piping at cuffs and chest pocket
  • Terry cloth track suit (jacket and pants) with white 3-Stripes detailing and adidas x Bogey Boys branding
  • V-neck sweater vest in collegiate green with checkered white and green contrasting across the shoulders and small contrast lines running through rib hem and armholes
  • Straight-leg trouser made with adidas’ WARPKNIT material featuring pintuck detail down front and back legs along with piping around pockets for a crisp finish
  • Terry cloth romper with zip-front pockets, elastic waistband with pin buckle, back-right welt pocket and contrast white binding at armhole and leg opening
  • High-waisted skirt that features a side-zip opening, front and back seams with kick pleats, triangle pocket inserts with piping detail, and zipper pocket back-center and adidas’ WARPKNIT material
  • Playful graphic tee that includes a 'Welcome to the Clubhouse' message on the back featuring characters dressed in pieces of the collection sketched by Macklemore and the adidas team.

There will be a handful of accessories to complement the range including a five-panel rope hat, leather golf glove, and leather travel bag featuring croc texture with metal feet and hardware.

More information:
adidas Sportswear collection
Source:

adidas AG

Photo: ISKO
01.06.2023

BDG [By Urban Outfitters] and ISKO Denim launch 10-piece collection

BDG [By Urban Outfitters] and ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of the experts at ISKO’s Creative Room London. The collection even features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

BDG [By Urban Outfitters] and ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of the experts at ISKO’s Creative Room London. The collection even features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

The collaboration incorporates the principles of circular design, including minimal wash processing, recycled cotton content, minimal metal trims and removable shank buttons. The styles are designed to last, and after many wears they will be readily recyclable for their next life. Urban Outfitters are also members of Better Cotton whose mission is to help cotton communities survive and thrive, while protecting and restoring the environment as part of the brand's wider sustainability initiatives.

The collection designs pay homage to workwear trends to deliver an all-encompassing gender free denim capsule. The finishing touch across the range comes from established British Artist, Dwayne Coleman, who has created an artwork made with upcycled denim and paint techniques which has become the inspiration for denim surface treatment. Elements of his mark-making have been applied to the design of the collection, including wildflower embroideries, patching and hanging threads.

 

Source:

ISKO

Photo: Munich Fabric Start
26.05.2023

20 YEARS OF BLUEZONE

The fully booked international denim trade show BLUEZONE will celebrate its anniversary. More than 100 denim and sportswear specialists will transform Munich's Zenith area into a blue hotspot on this summer's early July date, which has been repositioned for the first time. Parallel to MUNICH FABRIC START and THE SOURCE and with a supporting program that is as full to the brim as it is relevant, the area on Munich's Lilienthalallee will become the hub of the international fashion community.

2023 is not only BLUEZONE's anniversary year: this summer marks the 150th anniversary of the patenting of jeans, Orta celebrates its 70th birthday in 2023 and denim icon Ruedi Karrer celebrates the 50th of his "The Jeans Museum" in Zurich. Vicunha is celebrating its 55th birthday. BLUEZONE therefore pays tribute to denim in all its facets. CONNEXXION is the appropriate leitmotif of the upcoming event.

The fully booked international denim trade show BLUEZONE will celebrate its anniversary. More than 100 denim and sportswear specialists will transform Munich's Zenith area into a blue hotspot on this summer's early July date, which has been repositioned for the first time. Parallel to MUNICH FABRIC START and THE SOURCE and with a supporting program that is as full to the brim as it is relevant, the area on Munich's Lilienthalallee will become the hub of the international fashion community.

2023 is not only BLUEZONE's anniversary year: this summer marks the 150th anniversary of the patenting of jeans, Orta celebrates its 70th birthday in 2023 and denim icon Ruedi Karrer celebrates the 50th of his "The Jeans Museum" in Zurich. Vicunha is celebrating its 55th birthday. BLUEZONE therefore pays tribute to denim in all its facets. CONNEXXION is the appropriate leitmotif of the upcoming event.

"We have a line-up that will almost break the two days: in addition to internationally relevant and well-known exhibitors such as Calik, Denim Authority, Isko, Kurabo, Naveena Denim, NDL, Orta, Royo, Saitex and Sharabati among many others, we will have a 360° degree denim experience park in the completely booked Zenith Area", says Frank Junker, Creative Director & Partner, Munich Fabric Start Exhibitions GmbH. What visitors can expect here, among other things: two seminar sessions by the Transformers Foundation as well as panels and talks with Women in Denim, Mohsin Sajid and The 5 Denim Senses by AMD Düsseldorf, plus installations such as the photo exhibition "The World's best Denim Fades" by Bryan Szabo, founder of the Indigo Invitational, the exhibition by designer Ksenia Schnaider and a special presentation by "The Jeans Museum" Zurich, through which Ruedi Karrer himself will give guided tours.

For the first time, BLUEZONE will take place this summer on the new, earlier dates of July 18 and 19 and not at the end of August / beginning of September as in the past. With this step forward in terms of dates, MUNICH FABRIC START and BLUEZONE are reacting to changed order and collection rhythms and will position themselves in the future at the beginning of the purchasing and sourcing phase.

To this end, the exclusive VIEW Premium Selection, also organized by Munich Fabric Start Exhibitions GmbH, will move to the previous MFS date and on September 13 and 14 - then for the first time also on the Zenith grounds - will offer the market an additional, later ordering opportunity as RE:VIEW.

Source:

Munich Fabric Start

Capsule collection using recycled materials and kinder wash processes Photo ISKO
25.05.2023

By Urban Outfitters & ISKO Denim: Capsule collection using recycled materials and kinder wash processes

BDG [By Urban Outfitters] and the denim mill, ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of ISKO’s Creative Room London. The collection features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

BDG [By Urban Outfitters] and the denim mill, ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of ISKO’s Creative Room London. The collection features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

The collaboration incorporates the principles of circular design, including minimal wash processing, recycled cotton content, minimal metal trims and removable shank buttons. The styles are designed to last, and after many wears they will be readily recyclable for their next life. Urban Outfitters are members of Better Cotton whose mission is to help cotton communities survive and thrive, while protecting and restoring the environment as part of the brand's wider sustainability initiatives.

Source:

Menabo for ISKO

(c) Bangladesh Apparel Exchange
22.05.2023

2nd Denim Innovation Night held in Bangladesh

2nd Denim Innovation Night presented by Pacific Jeans was held during the 14th Bangladesh Denim Expo to showcase the innovation in the country’s denim industry.

The show displayed the very latest in sustainably produced and innovative denim products from Pacific Jeans to apparel brands and retailers, embassy representatives, development partners and to the representatives of the industry supply chain.

About 500 invited guests got the opportunity to witness the denim research, design and production innovation provided by the Bangladeshi denim Group highlighting the breadth and depth of denim innovation available in the country – from fibre, through to fabrics, design, manufacture and finishing.

Pacific Jeans Limited manufactures premium jeans in Bangladesh and exports to over 50 countries. With a continuous focus on quality improvement and value addition, adoption of updated denim processing technology, commitment towards safe and sustainable industry, the group has become one of the preferred suppliers to leading global fashion retailers.

2nd Denim Innovation Night presented by Pacific Jeans was held during the 14th Bangladesh Denim Expo to showcase the innovation in the country’s denim industry.

The show displayed the very latest in sustainably produced and innovative denim products from Pacific Jeans to apparel brands and retailers, embassy representatives, development partners and to the representatives of the industry supply chain.

About 500 invited guests got the opportunity to witness the denim research, design and production innovation provided by the Bangladeshi denim Group highlighting the breadth and depth of denim innovation available in the country – from fibre, through to fabrics, design, manufacture and finishing.

Pacific Jeans Limited manufactures premium jeans in Bangladesh and exports to over 50 countries. With a continuous focus on quality improvement and value addition, adoption of updated denim processing technology, commitment towards safe and sustainable industry, the group has become one of the preferred suppliers to leading global fashion retailers.

The program was inaugurated by Commerce Minister Tipu Munshi, MP; while the Head of the Delegation of the European Union in Bangladesh H.E. Charles Whiteley was the Guest of Honor; President of Bangladesh Garment Manufacturers and Exporters Association (BGMEA) Faruque Hassan and Country Representative of the Japan External Trade Organization (JETRO) in Bangladesh Yuji Ando were special guests at the program.

The 1st Denim Innovation Night was presented by Pacific Jeans during the 7th edition of Bangladesh Denim Expo in November 2017.

Source:

Bangladesh Apparel Exchange

22.05.2023

adidas to release existing YEEZY product

adidas announced it will begin selling some of the remaining inventory of adidas YEEZY products, with an initial release end of May 2023. A significant amount will be donated to selected organizations working to combat discrimination and hate, including racism and antisemitism. These include but are not limited to the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change.  

The release will mark the first time that products have been available to consumers since adidas terminated the YEEZY partnership in October 2022. The products will be existing designs and designs initiated in 2022 for sale in 2023.  Additional releases of existing inventory are currently under consideration, but timing is yet to be determined. Today’s announcement has no immediate impact on the company’s current financial guidance for 2023.

adidas announced it will begin selling some of the remaining inventory of adidas YEEZY products, with an initial release end of May 2023. A significant amount will be donated to selected organizations working to combat discrimination and hate, including racism and antisemitism. These include but are not limited to the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change.  

The release will mark the first time that products have been available to consumers since adidas terminated the YEEZY partnership in October 2022. The products will be existing designs and designs initiated in 2022 for sale in 2023.  Additional releases of existing inventory are currently under consideration, but timing is yet to be determined. Today’s announcement has no immediate impact on the company’s current financial guidance for 2023.

Since terminating the YEEZY partnership in October, adidas has been exploring multiple scenarios for the potential use of the existing YEEZY inventory. The process involved seeking feedback and listening to a diverse group of employees, organizations, communities, and consumers for how to responsibly manage the existing product. The company went ahead with already committed production orders after the partnership was terminated. This was done to help protect its supply chain partners from being negatively affected by cancellations.

More information:
adidas adidas AG Sportswear shoes
Source:

adidas AG

(c) Italdesign
Durch direkten 3D-Druck auf Materialien wie Wildleder kann man bei Anwendungen für Fahrzeuginnenräume besser unterschiedliche Farben und Texturen ausprobieren
18.05.2023

Stratasys zeigt 3D-Drucktechnologie auf ITMA 2023

Auf der ITMA in Mailand (Italien) zeigt Stratasys vom 8.-14. Juni erstmals seine moderne 3D-Drucktechnologie 3DFashion™ für direkten Textildruck. Die Lösung kombiniert fortschrittliche Materialien mit dem 3D-Drucker J850 TechStyle™. Textil- und Bekleidungshersteller können hierdurch neue Möglichkeiten ausloten und vollfarbige, durchscheinende, starre und flexible Materialien direkt an Textilien und Kleidungsstücken befestigen.

Die Technologie dient dazu, verschiedene neue Modeanwendungen zu erschließen und profitables Wachstum voranzutreiben. Textilhersteller, die im Auftrag von Luxusmodedesignern und Marken aus Sektoren wie der Automobilbranche und dem gehobenen Modesektor arbeiten, können ihr Serviceangebot differenzieren.

Die 3D-Druckmaterialien umfassen inzwischen auch die Kunstharze VeroEco™ Flex von Stratasys, die den strengen RSL-Industriestandards entsprechen.

Auf der ITMA in Mailand (Italien) zeigt Stratasys vom 8.-14. Juni erstmals seine moderne 3D-Drucktechnologie 3DFashion™ für direkten Textildruck. Die Lösung kombiniert fortschrittliche Materialien mit dem 3D-Drucker J850 TechStyle™. Textil- und Bekleidungshersteller können hierdurch neue Möglichkeiten ausloten und vollfarbige, durchscheinende, starre und flexible Materialien direkt an Textilien und Kleidungsstücken befestigen.

Die Technologie dient dazu, verschiedene neue Modeanwendungen zu erschließen und profitables Wachstum voranzutreiben. Textilhersteller, die im Auftrag von Luxusmodedesignern und Marken aus Sektoren wie der Automobilbranche und dem gehobenen Modesektor arbeiten, können ihr Serviceangebot differenzieren.

Die 3D-Druckmaterialien umfassen inzwischen auch die Kunstharze VeroEco™ Flex von Stratasys, die den strengen RSL-Industriestandards entsprechen.

Stratasys bietet auch eine Vorschau auf zwei Technologien, die sich zurzeit in der Entwicklungsphase befinden. Das konzeptionelle Instrument des Unternehmens für den direkten Druck auf Kleidungsstücke wurde entwickelt, um vorhandene Kleidungsstücke kreativer zu gestalten und langlebiger zu machen. Mit dieser zusätzlichen 3D-Druckfunktion der J850 TechStyle kann man ein bestimmtes Design direkt auf vorhandene Kleidungsstücke drucken, die an einem speziellen Instrument befestigt sind. Hierzu zählen etwa Hosen, Hemden und Jacken, denen man so ein „zweites Leben“ ermöglichen oder einen neuen, individuellen Stil verleihen kann.

Stratasys ermöglicht zudem einen ersten Blick auf ein Softwareinstrument für die Umwandlung von 2D in 3D. Nutzer des Druckers J850 TechStyle können damit mühelos Länge, Farben und Texturen von 2D-Bildern anpassen und in 3D-gedruckte Elemente umwandeln. Besucher können ein 2D-Logo einreichen, das Stratasys während der Messe in ein 3D-druckbares Bild auf Textilmustern umwandelt.

Zudem wird Ofer Libo, Senior Product Manager von Stratasys, auf der ITMA im Rahmen des offiziellen Informationsprogramms der Veranstaltung eine Präsentation halten. Sie trägt den Titel „Innovative Herstellung von Textilien und Kleidungsstücken mit der 3D-Drucktechnologie für direkten Textildruck von Stratasys”.

More information:
Stratasys ITMA ITMA 2023 3D-Druck
Source:

Stratasys

(c) Freudenberg Performance Materials Holding GmbH
Judith Marquant from fashion school Esmod in Paris during the presentation of her winning design
17.05.2023

Freudenberg Performance Materials Apparel: Winners of "Fashioning Sustainability"

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Source:

Freudenberg Performance Materials Holding GmbH

(c) adidas AG
21.04.2023

adidas TERREX and National Geographic launch hiking collection

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

  • A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
  • A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
  • The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
  • The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.
More information:
adidas Outdoor outdoor apparel
Source:

adidas AG