From the Sector

Reset
876 results
(c) EFI GmbH
30.12.2022

EFI Reggiani with textile printing solutions at India ITME 2022

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

  •  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
  • Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
  • One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
  • Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.
Source:

EFI GmbH

(c) adidas AG
21.12.2022

adidas Cultivate & B.L.O.O.M. Program elevates Black and Latinx Entrepreneurs

  • In Spring 2022, adidas announced its partnership with Impact Hub and Blavity.org to launch a new program called Cultivate & B.L.O.O.M. (Building Legacies Out of Movements), an accelerator program for social entrepreneurs of color.
  • Through knowledge sharing and funding, the program cultivates a thriving ecosystem for changemakers to accelerate impact and deliver initiatives at the intersection of sport, equity and creativity for Black and Latinx communities.

In Spring 2022, adidas announced its newest program, Cultivate & B.L.O.O.M., designed to equip entrepreneurs of color with tools and resources to enable them to accelerate growth and maximize impact. As part of adidas’ United Against Racism commitments and celebration of boundary-breaking Black women, Cultivate & B.L.O.O.M. is further closing the opportunity gap that exists for Black and Latinx social entrepreneurs by elevating, co-creating with and funding entrepreneurs creating change in their communities.

  • In Spring 2022, adidas announced its partnership with Impact Hub and Blavity.org to launch a new program called Cultivate & B.L.O.O.M. (Building Legacies Out of Movements), an accelerator program for social entrepreneurs of color.
  • Through knowledge sharing and funding, the program cultivates a thriving ecosystem for changemakers to accelerate impact and deliver initiatives at the intersection of sport, equity and creativity for Black and Latinx communities.

In Spring 2022, adidas announced its newest program, Cultivate & B.L.O.O.M., designed to equip entrepreneurs of color with tools and resources to enable them to accelerate growth and maximize impact. As part of adidas’ United Against Racism commitments and celebration of boundary-breaking Black women, Cultivate & B.L.O.O.M. is further closing the opportunity gap that exists for Black and Latinx social entrepreneurs by elevating, co-creating with and funding entrepreneurs creating change in their communities.

Through an intentional selection process, eight Black women social entrepreneurs were identified to participate in the first-ever Cultivate & B.L.O.O.M. cohort. The first cohort kicked off in July 2022 and will graduate in March 2023.

Throughout their nine months in the program, entrepreneurs have access to a tailored portfolio of resources and opportunities from within and outside of the adidas ecosystems that will serve to accelerate their impact. These resources include funding, access to industry experts, mentorship, workshops, fireside chats and visibility into adidas’ networks.

After graduating from the program, participants become a partner in the “Innovation Network”, a network of social impact partners that seek to drive forward change within their communities and organizations. This portfolio of partners will enable adidas to continue strengthening the diversity of our partnership network, increase our reach within key markets and deepen our relationships over time.

Source:

adidas AG

20.12.2022

Mey and Hologenix® launch first menswear collection with Celliant® Viscose

Mey GmbH & Co. KG, a global manufacturer of underwear, nightwear and lingerie based in Germany, is launching the world’s first men’s nightwear with CELLIANT® Viscose, which converts body heat into infrared energy.

Called mey Zzzleepwear - THE NEW SLEEP-LIFE BALANCE, the collection follows the successful debut of the similarly named women’s collection in 2021. It consists of four designs in Indigo available in T-shirts, short pants, long-sleeved shirts and long pants. CELLIANT works by recycling the heat emitted by the body into full-spectrum infrared energy and then returns it to the body. As a result, it increases the supply of oxygen to the cells and promotes a restful sleep.

Mey GmbH & Co. KG, a global manufacturer of underwear, nightwear and lingerie based in Germany, is launching the world’s first men’s nightwear with CELLIANT® Viscose, which converts body heat into infrared energy.

Called mey Zzzleepwear - THE NEW SLEEP-LIFE BALANCE, the collection follows the successful debut of the similarly named women’s collection in 2021. It consists of four designs in Indigo available in T-shirts, short pants, long-sleeved shirts and long pants. CELLIANT works by recycling the heat emitted by the body into full-spectrum infrared energy and then returns it to the body. As a result, it increases the supply of oxygen to the cells and promotes a restful sleep.

CELLIANT Viscose was developed by Hologenix®, creators of CELLIANT, a textile-based infrared ingredient brand, and Kelheim Fibres, a leading manufacturer of viscose specialty fibers. CELLIANT Viscose features natural minerals embedded into plant-based fibers and is biodegradable. It provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as the fiber enhancements from CELLIANT infrared technology. In addition, CELLIANT is durable and will not wash out.

Source:

Hologenix, LLC,

(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

Photo: Montex
15.12.2022

Monforts: 40 years of advanced manufacturing in Austria

Montex Maschinenfabrik – the key site for the manufacturing of Monforts finishing machines in Austria – has celebrated its 40th anniversary in 2022.

Located in St. Stefan, in the centre of Austria’s Lavant Valley in Carinthia, the advanced manufacturing hub was founded by Monforts in 1982.

“From the outset, we have specialised in all aspects of machine production, including high-precision sheet metal working, laser cutting and welding, and the pre-assembly of machines and components, , along with a well-organised quality management and spare parts service,” says Montex plant manager Gert Hanzl.

“We work very closely with the Monforts research and development team in Mönchengladbach, Germany, to take the latest new ideas through testing and prototyping, in readiness for future series production,” Hanzl says. “We are fully exploiting the many new possibilities in the continuous development of design and manufacturing methods. The respective electrical switch cabinets for the machines are delivered just-in-time from Monforts in Germany according to our production schedules.”

Montex Maschinenfabrik – the key site for the manufacturing of Monforts finishing machines in Austria – has celebrated its 40th anniversary in 2022.

Located in St. Stefan, in the centre of Austria’s Lavant Valley in Carinthia, the advanced manufacturing hub was founded by Monforts in 1982.

“From the outset, we have specialised in all aspects of machine production, including high-precision sheet metal working, laser cutting and welding, and the pre-assembly of machines and components, , along with a well-organised quality management and spare parts service,” says Montex plant manager Gert Hanzl.

“We work very closely with the Monforts research and development team in Mönchengladbach, Germany, to take the latest new ideas through testing and prototyping, in readiness for future series production,” Hanzl says. “We are fully exploiting the many new possibilities in the continuous development of design and manufacturing methods. The respective electrical switch cabinets for the machines are delivered just-in-time from Monforts in Germany according to our production schedules.”

While there is standardisation in series-produced Monforts machines, Montex is also increasingly called upon to construct bespoke machines with unique designs, according to the special needs of customers in technical textile or special textiles, he adds.

The core Monforts machine range, including the industry standard Montex stenters, along with relaxation dryers, Thermex dyeing ranges, Monfortex compressive shrinking ranges and Montex®Coat coating units is built at the Austrian site.

Source:

AWOL Media for Montex

Grafik Trevira CS
08.12.2022

Trevira CS at the Heimtextil Trade Fair 2023

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

The following Trevira CS customers and partners will be exhibiting:
Chamatex SAS, F.lli Baroni s.r.l., FIDIVI Tessitura Vergnano S.p.A., Hoftex Färberei GmbH, Ilcat by Lei Tsu s.r.l., Lodetex S.p.A., Lonfil S.r.l., Mattes & Ammann GmbH & Co. KG, Mottura S.p.A., Pozzi Arturo S.p.A., PUGI R.G. S.R.L., Tessitura Mario Ghioldi & C. s.r.l., Tintoria Sala s.r.l., Torcitura Fibre Sintetiche S.p.A., Torcitura Padana S.p.A., Vlnap a.s., Wagenfelder Spinnereien GmbH and Wintex S.r.l.

The presentations on the Trevira CS brand will focus on 2 topics. One revolves around information on sustainability: The Path of Sustainability presentation will give visitors detailed information about the various sustainability aspects of the Trevira CS brand. The information chain will deal with Trevira CS technology, particularly sustainable product variants, the longevity of the textiles, the Trevira CS eco brand for flame retardant fabrics with recycled content, and the take-back program for Trevira CS fabrics. At the end of the chain, a prototype of a new product development will be presented, giving insight into the brand’s future sustainable development opportunities.

Once again, there will also be a special exhibition. The focus here will be on showcasing the special additional functions and properties that Trevira CS fabrics offer in addition to their flame retardancy. Visitors can look forward to a special staging: It’s showtime for the TEXTILE TALENTS by Trevira CS!

For the design of the special exhibition, all Trevira CS customers were invited to submit their latest Trevira CS products, distinguished by additional functions and/or special features, to the annual Trevira CS Fabric Competition. 227 products from 50 customers were submitted, from which about 150 were selected for the special exhibition. Several thousand meters of yarn will also be used in this year's special show.

Source:

Trevira GmbH

Photo: Freudenberg Performance Apparel
24.11.2022

Freudenberg Performance Materials Apparel: Rooftop photovoltaic coverage at Nantong

Freudenberg recently completed the installation of 13,000m2 of photovoltaic cells on the roof of its new Nantong factory. With a total capacity of 1.6 MW, the new rooftop installation is projected to produce 1.5 million kWh of green electricity each year. In addition to reduced energy consumption from the grid, this new installation will lower CO2 emissions by approximately 1,200 tons/year.

Freudenberg recently completed the installation of 13,000m2 of photovoltaic cells on the roof of its new Nantong factory. With a total capacity of 1.6 MW, the new rooftop installation is projected to produce 1.5 million kWh of green electricity each year. In addition to reduced energy consumption from the grid, this new installation will lower CO2 emissions by approximately 1,200 tons/year.

Beyond the photovoltaic installation, Freudenberg has integrated sustainability into the Nantong factory’s design, with advances in energy conservation and emissions and loss reduction.
The factory uses valley voltage to cool water in its reservoir that is applied to A/C and machine temperature management during working hours. The new waste gas treatment technology enables hot water collected by heat exchangers to be directly reused in production, thereby reducing thermal energy waste. Furthermore, the factory applies a new multi-phase waste gas treatment technology to reduce volatile organic compounds (VOC) emissions. The factory has also incorporated new methods to improve the A-grade rates of bi-elastic interlinings and shirt interlinings, further reducing waste while improving garment quality.

As part of the Group’s sustainable development strategy, Freudenberg Apparel has also launched its House of Sustainability to minimize the impact of production processes on the environment and help customers achieve their sustainability goals, with responsible products across the seasons.

Source:

Freudenberg Performance Apparel

Photo HeiQ
24.11.2022

HeiQ Mint: No more smelly socks or shirts

HeiQ takes advantage of its presence at ISPO Munich 2022, 28th-30th of November, to launch HeiQ Mint, the new proprietary odor control technology. It is plant-based and designed to make textiles smell fresh even if we use them repeatedly, avoiding the need for frequent washes, thus enabling to save water and energy.

HeiQ Fresh MNT-01, under the HeiQ Mint product family, jointly developed with Patagonia, addresses body odors on textiles and regenerates at every wash, with superior efficiency and durability that meets most end-use performance requirements, while keeping all the fabric properties such as breathability, hand feel, or wicking. This textile technology is OEKO-TEX® suited, bluesign approved, and ZDHC compliant, with a USDA bio-preferred certification in progress.

HeiQ takes advantage of its presence at ISPO Munich 2022, 28th-30th of November, to launch HeiQ Mint, the new proprietary odor control technology. It is plant-based and designed to make textiles smell fresh even if we use them repeatedly, avoiding the need for frequent washes, thus enabling to save water and energy.

HeiQ Fresh MNT-01, under the HeiQ Mint product family, jointly developed with Patagonia, addresses body odors on textiles and regenerates at every wash, with superior efficiency and durability that meets most end-use performance requirements, while keeping all the fabric properties such as breathability, hand feel, or wicking. This textile technology is OEKO-TEX® suited, bluesign approved, and ZDHC compliant, with a USDA bio-preferred certification in progress.

The product development tests were highly demanding, with HeiQ Mint standing out in comparison to the other two tested solutions. According to Laura Hoch, Patagonia’s Materials Innovation Engineer, “out of all the anti-odor technologies we tested, HeiQ Mint provided the highest odor control performance, with the added benefit of being plant-based. This innovation enables Patagonia to deliver our customers high-performing products made with the best available chemistry.”

Another advantage of HeiQ Mint is the ability to be applied and marketed worldwide, without the need for biocidal declaration on product labels, since it is based on a blend of essential mint oils and naturally derived deodorizing ingredients. HeiQ Mint is just Fresh by Nature.

It is ideal for next-to-skin products like sports apparel, underwear, linings, casual and business wear but also home textiles such as bed linen, pillow fabrics, or mattress textiles, both on cellulosic and synthetic fibers.

More information:
HeiQ Mint odor control Sportswear
Source:

HeiQ

Foto: Messe Düsseldorf, Constanze Tillmann
24.11.2022

Trendbörse EuroShop 2023

  • Materials & Surfaces: was Design in schwierigen Zeiten bewirken kann
  • Nachhaltigkeit ist Leitgedanke
  • Natur und Harmonie als Rezept gegen Krisenmodus
  • Custom-made Design gewinnt

Aufgeschäumtes Aluminium, transluzente Betonflächen oder filigrane Gespinste, die das Gewicht massiver Steinbrocken zu balancieren scheinen – die Inszenierung von Shopping-Erlebnissen spielt gern mit dem visuellen Wow. Die Dimension Materials & Surfaces der EuroShop, the World’s No. 1 Retail Trade Fair, vom 26. Februar bis 02. März 2023 in Düsseldorf, ist Trendbörse und Inspiration für Store-Architekten, Ladenbauer und Kreative.

  • Materials & Surfaces: was Design in schwierigen Zeiten bewirken kann
  • Nachhaltigkeit ist Leitgedanke
  • Natur und Harmonie als Rezept gegen Krisenmodus
  • Custom-made Design gewinnt

Aufgeschäumtes Aluminium, transluzente Betonflächen oder filigrane Gespinste, die das Gewicht massiver Steinbrocken zu balancieren scheinen – die Inszenierung von Shopping-Erlebnissen spielt gern mit dem visuellen Wow. Die Dimension Materials & Surfaces der EuroShop, the World’s No. 1 Retail Trade Fair, vom 26. Februar bis 02. März 2023 in Düsseldorf, ist Trendbörse und Inspiration für Store-Architekten, Ladenbauer und Kreative.

Veränderte Vorzeichen, innere Werte
Der Rahmen für den klassischen Einkaufsbummel hat sich verschoben, der andauernde Krisenmodus stellt das stationäre Shopping vor neue Aufgaben – und damit auch die Hersteller von Ladenbau-Werkstoffen. „Im Vergleich zu der Zeit vor Corona ist es heute nicht mehr nur das Ziel der Planer, die Kunden durch eine angenehme Atmosphäre möglichst lange zum Verweilen im Shop zu bringen, sondern sie durch eine gewisse Leichtigkeit und Einfachheit von den vielen Alltagssorgen abzulenken“, analysiert Klaus Monhoff, Leiter Dekor- und Designmanagement bei Egger Holzwerkstoffe. Lebendige Feelgood-Szenarios sind gefragt und geprägt von „Überraschung, Individualisierung, Kreativität, Erlebnis, Innovation, Sinnlichkeit, Komfort“, so Eleonora Zappanico, Marketing Operation Manager beim italienischen High-Tech-Textilspezialisten S.I. Srl. Allen Details, die die Sinne berühren, kommt wachsende Beachtung zu, auch eine samtig-schmeichelnde Oberfläche ist haptische Willkommensgeste und erhöht die Aufenthaltsqualität in einem Store.

Die funktionalen Eigenschaften nehmen allgemein an Bedeutung zu, es werden performante Alleskönner für reibungsarme Prozessabläufe gesucht: Robustheit für eine erhöhte Langlebigkeit, gut desinfizierbare, leicht zu reinigende und Antifingerprint-Oberflächen. Dekore und Werkstoffe sollen vielseitig einsetzbar und super miteinander kombinierbar sein, alles flexibel, schnell verfügbar und in größtmöglicher Vielfalt.

Während die „inneren Werte“ an Relevanz zunehmen, tritt die plakative Optik etwas in den Hintergrund zugunsten gemäßigterer Oberflächen. Hölzer haben nicht mehr die ganz markante, rustikale Maserung, reines Weiß wird seit Corona von gebrochenen Tönen und warmer Farbigkeit abgelöst, eine gewisse Reduktion beim Design ist allseits erkennbar, Harmonie gewinnt.

Vom Charme der Natur
Warme Holzoptiken, Beton-Look, Stein- und Mauerwerk-Verkleidungen an Wänden, Böden und den Ladenmöbeln – naturnahe, authentische Oberflächen passen nach wie vor ins Bild. Auffällig ist, dass typische Outdoor-Texturen zunehmend in die Innen- und Ladenräume wandern und die Grenzen zwischen Außen und Innen aufheben. „Farben und Materialien aus der Natur, die das Einkaufserlebnis bereichern, sind ein Trend, der im biophilen Design seinen maximalen Ausdruck findet“, so Francesco Maffei vom italienischen Fliesenhersteller Ceramiche Keope. Ein „Raw Earth Effect“ wurde bei Keope der Bodenfliesen-Serie ‚Geo‘ zugrunde gelegt: Fliesen mit Toneffekt, die die optische Unvollkommenheit von Erde in ihr – dabei sehr elegantes – Design übersetzen.

Bei imi surface design, Spezialist für originalgetreue Oberflächen wie z.B. Beton-, Rost-, Altholz- und Steinoptik für unterschiedliche Trägermaterialien, ist eine schöne helle Kalkstein-Optik als biegbare und versiegelte Variante neu im Programm. Mit herkömmlichem Tischlerwerkzeug zu verarbeiten, lassen sich damit Wände, Böden und selbst Möbelstücke in der eigentlich spröden, porösen Textur von Kalkstein gestalten, die dann aber eben nicht bröseln und bröckeln, sondern die im Ladenbau erforderliche Festigkeit und Strapazierfähigkeit aufweisen.

Neue Hölzer
Diversifizierung kennzeichnet die Holzoptiken. Bisher dominierten im Ladenbau die Klassiker Nuss und Eiche, nun sei die Zeit reif für neue Akzente, so David Lahnsteiner aus der Dekorentwicklung bei Kaindl, Hersteller von Dekor- und Schichtstoffverbundplatten und -Böden. „Schön, ausgewogen und elegant setzen die Nadelhölzer Abies, Polar Pine und Fichte neue Trends im Interior-Design.“ Beim Bestseller Eiche wird die Hell-Dunkel-Skala ausgebaut. „Die Dekorfamilie der Eiche Evoke zeigt schier grenzenlose Möglichkeiten im Bereich „Dark & Light“. Die fast schwarze "Infinity" greift den aktuellen Trend nach dunklen homogenen Holztönen auf, die helle jugendliche "Light“ mit ausgeprägten Farbkontrasten ist die perfekte Kombination zu vielen Uni-Farbtönen“, so Lahnsteiner.

Besonders authentisch wirken Naturoptiken auf Trägermaterialien durch eine dekorgleiche dreidimensionale Strukturprägung – die sog. Synchronprägung oder Synchronpore, die die Textur von Stein und Beton oder die charakteristische Maserung von Hölzern auch haptisch hervorhebt. Bei Egger Holzwerkstoffe hat man noch einen draufgesetzt und unter dem Namen ‚PerfectSense Feelwood‘ die Synchronporen-Oberflächen mit einem matten Lackfinish und Anti-Fingerprint-Eigenschaft veredelt – auf einem emissionsarmen Holzwerkstoffträger mit Recyclinganteil.

Design 4.0
Helles Holz an Betonoptik, Marmoreffekte neben hochglänzendem Farblack, derber Bruchstein kombiniert mit changierendem Acrylglas oder auch Spiegelrelief – in unüblichen Materialkontrasten, die die Sehgewohnheiten überraschen, liegt Innovationspotenzial. „Dass die Designs Aufmerksamkeit erregen, jedoch nicht vom Produkt ablenken, und etwas Besonderes sind, das man nicht überall sieht, das sind die Herausforderungen für Store-Architekten“, so Julian Theisen, Geschäftsführer bei Sibu Design, österreichischer Spezialist für Design-Paneele. Lebendige Oberflächen der Design-Panels, Reliefs und Strukturen, samtig-matte Oberflächen sind bei Sibu Design im Fokus. Auch „Spiegeloberflächen in den verschiedensten Farben, glatt bis grob strukturiert, sind nach wie vor sehr gefragt. Besonders oft stellen wir die genauen Farben des Corporate Designs nach; von der Spiegel- bis zur Stoffoberfläche. Auch der Anteil an gedruckten und gestanzten Logos steigt an“, ergänzt Theisen. – Customizing, einzigartige Details, die sich abheben, individuell konfektionierte Elemente gewinnen an Bedeutung.

Fundstücke aus der Manufaktur
Store-Design im gehobenen Level greift verstärkt auf (kunst)handwerklich Gefertigtes aus Manufaktur-Betrieben zu, um sich gegenüber Wettbewerbern, Mainstream und Discount zu profilieren. Auch diesbezüglich wird man auf der EuroShop 2023 reichlich fündig. Etwa bei der Glashütte Lamberts aus Waldsassen. Die Faszination mundgeblasener farbiger Flachgläser, die zunächst in der hochwertigen Architektur, internationalen Hotels und bei Luxusmarken Anwendung fanden, haben inzwischen auch die Gastro-Szene, Bäckereien und Handelshäuser für sich entdeckt. Sie kommen für Vitrinen, Glasgestaltung für Trennwände und hinterleuchtete Wandverkleidungen, Deckenverglasungen (Kuppelverglasungen, etc.) und Design-Leuchten, Tresen, Möbel, Tische, Fassaden und Fenster zum Einsatz.

Auch die Zahna-Fliesen GmbH ist so ein Manufaktur-Betrieb, der in Handarbeit mehrfarbige unglasierte Fliesen nach historischem Vorbild in Kleinserien herstellt. Oder auch das portugiesische Pendant Viúva Lamego, das neben industrieller Stückzahl-Fertigung auch die portugiesische Tradition der handbemalten Taylor-made-Fliesen lebendig hält. Durch Kollaborationen mit internationalen Künstlern und Architekten werden neue Einsatzgebiete ausgelotet und z.B. Wandfreskos aus Fliesen – modern bis retro – für Gasträume realisiert.

Auch die filigranen High-Tech-Vorhänge und Raumteiler aus Textil oder Kettengliedern von Herstellern wie i-mesh oder Kriskadecor seien hier erwähnt. Deren semitransparente Szenografie dient in Store-Konzepten hochkarätiger Marken wie Dior, Natuzzi und den niederländischen Luxus-Warenhäusern von de Bijenkorf als Struktur- und Design-Element.

Flexibel, digital und crossmedial
Flexibilität ist auch bei Material-Anbietern zum zentralen Stichwort geworden. Digitalisierung und Technologie-Einsatz erfordern von Läden flexiblere, wandelbare Einrichtungskonzepte und mehr Eventcharakter, Ladenräume werden häufig als dynamische, multifunktionale und vielseitig nutzbare Umgebungen konzipiert. Daher sind Lösungen gefragt, die einen schnellen Umbau erlauben. Sibu Design etwa bietet Dekorplatten mit Magnetrücken, die perfekt geeignet sind, um mit wenigen Handgriffen umzudekorieren und ein frisches Ambiente zu erzeugen.

Auch ein Fotoboden – fotorealistisch bedruckbarer Vinyboden von visuals united – wird nicht mehr nur als „Kundenstopper“ und temporäre Werbefläche am POS eingesetzt, berichtet Silke Hüsgen von der visuals united AG. „Mutige Kunden nutzen ein kreatives Design auf einem Fotoboden in Kombination von Augmented-Reality-Content, um die analoge Welt am POS mit der digitalen zu kombinieren“, so Silke Hüsgen von der visuals united AG. Denn: „Die letzten Jahre haben die Welt auf den Kopf gestellt. Nicht nur die Pandemie, auch die Auswirkungen des Ukraine-Kriegs erfordern neue bzw. andere Produktions-, Kommunikations- und Vertriebswege. Vom Retail fordert diese Situation zukunftsweisende Lösungen in den Bereichen ‚Nachhaltigkeit‘ und einen ‚crossmedialen POS‘.“

Recycling-Design auf grünen Wegen
Ausnahmslos alle Hersteller von Fliesen, Holz- und Verbundwerkstoffen, Dekorpaneelen und Sonderprodukten für den Ladenbau haben es auf dem Schirm: Die aktuell größte Herausforderung ist, ressourcenschonende Prozesse und nachhaltige Produkte und mittelfristig den Umbau zu geschlossenen Material- und Produktionskreisläufen anzustoßen und damit tragfähige Zukunftsperspektiven für den Ladenbau zu entwickeln, der von Wechsel und Veränderung lebt und damit nicht ganz optimal zu Nachhaltigkeit und Zirkulärwirtschaft passt. Sollte man meinen. „Würden wir ganz anders betrachten, denn unter dem Nachhaltigkeits-Aspekt müsste die beschichtete Spanplatte eigentlich einen Umwelt-Nobelpreis bekommen“, räumt Klaus Monhoff von Egger Holzwerkstoffe ein. „Begonnen bei der Herstellung, bei der schon ein hoher Anteil Recyclingholz eingesetzt wird, kann die Platte nach der Verwendung zum Ende des Lebenszyklus auch wieder zu 100 Prozent recycelt werden und bleibt also komplett im eigenen Umweltkreislauf.“

Eine Reihe marktfähiger ‚Win-win-Lösungen‘, die die Anforderungen an Umweltverträglichkeit mit den qualitativen Anforderungen von Store-Architekten zusammenbringen, präsentiert Bencore, italienischer Hersteller von Verbundplatten und Mitglied des Green Buiding Councils Italia, dem dortigen Verband für nachhaltiges Bauen. Darunter ‚Wasbottle‘, ein Kunststoff aus recycelten Kunststoffflocken, der gemeinsam mit Autogrill entwickelt wurde, um den anfallenden Abfall des Travelfood-Unternehmens wiederzuverwerten. Das Schmelzen und Verpressen der bunten Flocken kreiert eine ganz eigene Recycling-Ästhetik in fröhlich bunter Terrazzo-ähnlicher Anmutung, die sich sehen lassen kann. Kommentar Bencore: „Wir sind der festen Überzeugung, dass die Herstellung von recycelten und recycelbaren Produkten ein Muss für Marken und Lieferanten sein sollte.“

Source:

EuroShop Messe Düsseldorf

Grafik Groz-Beckert
22.11.2022

Groz-Beckert at India ITME 2022

The 11th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

The 11th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.

More information:
India ITME Groz-Beckert
Source:

Groz-Beckert KG

Photo munichfabricstart
21.11.2022

300 Pre-Collections at VIEW Premium Selection

First insights, first new materials and trend highlights: On 29 and 30 November 2022, the European premium fabric sector will meet for an important exchange with international producers at VIEW in Munich to find out about the first colour and material trends for spring/summer 2024 at the earliest possible time. A selected range of around 300 pre-collections will be on show at the MVG Museum. This means that VIEW will once again be strong and business-relevant this season.

First insights, first new materials and trend highlights: On 29 and 30 November 2022, the European premium fabric sector will meet for an important exchange with international producers at VIEW in Munich to find out about the first colour and material trends for spring/summer 2024 at the earliest possible time. A selected range of around 300 pre-collections will be on show at the MVG Museum. This means that VIEW will once again be strong and business-relevant this season.

The past VIEW Premium Selection in June 2022 was a great success. Completely booked out and more international than ever, the Preview Textile Show of Munich Fabric Start Exhibitions GmbH was an important contact point for the buying and design teams of companies such as Akris, Baldessarini, Bogner, Calvin Klein, Cinque, Comma, Drykorn, Escada, Hugo Boss, Lala Berlin, Lagerfeld, Laurél, MAC, Marc Cain, Marc O'Polo, Riani, Schumacher or Strellson. The trend towards an increasingly international range continues in November. Numerous buyers, designers and product managers from European ready-to-wear manufacturers are expected in Munich the week after next, looking for new material innovations and trends at VIEW and the parallel ISPO.

International exhibitor portfolio with many new names
Material influences from Europe to Asia bring a highly exciting mix for the trend research of the new collections. Exhibitors from Bulgaria, China, Denmark, Germany, France, Great Britain, Greece, Hong Kong, Italy, Japan, Korea, Spain and Turkey are among the participants.

The newcomers and returnees include, in addition to others:
AGNSTR / ALA CAMPOLMI / BAIRD MC NUTT / BELL & THUNDER / CB STILE / COLORA / EKOTEN / FABRIC LAB / GUARISCO / JECA LIMITED / KING BUTTON / LANIFICIO CAVERNI / LIMONATA EAST / M.T.T. MANIFATTURA / MANTERO / MILIOR / MTP PIEROZZI / PADROCASAS / PIZVAL / RIBBONTEX / SITIP / TEKSTINA SINCE 1828 / TEXMODA / VIVOLO und WAY.

More information:
VIEW Premium Selection F/S 2024
Source:

munichfabricstart

(c) ECOSENSOR™ by Asahi Kasei
18.11.2022

Asahi Kasei Group celebrates 100 years at ISPO Munich 2022

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

New this season is the application of the RespiGard™ by Polypore unique membrane designed for outdoor apparel. Its innovative pore structure is too small for water droplets to penetrate but features high porosity that allows for airflow and moisture evaporation.

In order to show at best the performances and possible applications of the fabrics made with RespiGard™, ECOSENSOR™ will feature at its ISPO space an ad hoc created outfit by the outerwear brand.

Furthermore, the majority of ECOSENSOR™ fabrics are made with sustainable ingredients which are certified by international certifications such as GRS and RCS through a traceable and transparent production process and supply chain.  100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials. Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Source:

ECOSENSOR™ by Asahi Kasei / C.L.A.S.S..

(c) POLARYSE
18.11.2022

Grand Largue Composites and Sicomin enable flax-fibre-built Racing Yacht

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Crosscall's cockpit was designed to be effectively non-structural, with the mainsheet, which can generate huge shock loads, supported separately. This would allow the cockpit to be made from a hybrid biaxial fabric comprising 50% flax fibres. Other parts of the boat that incorporate flax fibre include the tunnel, the engine cover, the ballast tanks and the cap. The rest of the boat is reinforced with 100% glass-fibre fabrics.

To help it realise this ambitious design, GLC, an infusion specialist, turned to its long-time material supplier, Sicomin. The hull was moulded and infused in one piece and the deck – including the hybrid flax-fibre cockpit – was also infused as a single part. The internal structure was then laminated into the hull by hand before the hull and deck were finally bonded together.

The infusion resin selected was Sicomin’s SR 1710, a high-modulus structural epoxy. Designed specifically for use in infusion and injection processes, it has exceptionally low viscosity and its low-reactivity hardener makes it suitable for the production of large parts. Composites components made from SR 1710 possess high interlaminar shear-strength and the resin retains its mechanical properties in wet environments.

Sicomin’s low-toxicity SR 8200 was used to laminate the internal structures onto the skin of the hull. Ideal for hand laminating, this system includes a choice of hardeners with a wide range of reactivities, which makes it equally suitable for making large or small parts. The hull and deck were joined together with Sicomin’s Isobond SR 7100, which demonstrates high fatigue strength and is very resistant to microcracking.

An epoxy bonding primer – called Undercoat EP 215 HB+ and supplied by Sicomin’s sister company, Map Yachting – was applied to the moulds first to make demoulding easier. It also serves as an undercoat in the polyurethane exterior paint system that is used instead of gelcoat to protect the epoxy hull from UV damage.

Since the launch of Crosscall, GLC has started building a second Lift V2 Class40 and a third one is now planned, both for which Sicomin will supply the materials.

Source:

Sicomin / 100% Marketing

18.11.2022

BOGNER aligns management and corporate structure

  • Successful repositioning: BOGNER achieves its best financial year since 2015 following the completion of the two-year performance program.
  • Continuity in management: Gerrit Schneider takes over as sole CEO. Heinz Hackl, present Co-CEO, leaves the company by mutual agreement. With former CEO Andreas Baumgaertner and Andreas Gall two experienced advisors move closer to the management.
  • Streamlined governance and corporate structure: Arndt Geiwitz hands the company back into the hands of the family after the successful completion of the performance program and takes over the chairmanship of the newly created advisory board. BOGNER operates with GmbH as legal form in the future.

With the financial results in 2021/22, BOGNER has achieved the most successful financial year since 2015. A key contribution to this was provided by the performance program developed with the management consultancy EY Parthenon in July 2020. Since then, it was implemented as planned and successfully promoted profitability and sustainable global growth.

  • Successful repositioning: BOGNER achieves its best financial year since 2015 following the completion of the two-year performance program.
  • Continuity in management: Gerrit Schneider takes over as sole CEO. Heinz Hackl, present Co-CEO, leaves the company by mutual agreement. With former CEO Andreas Baumgaertner and Andreas Gall two experienced advisors move closer to the management.
  • Streamlined governance and corporate structure: Arndt Geiwitz hands the company back into the hands of the family after the successful completion of the performance program and takes over the chairmanship of the newly created advisory board. BOGNER operates with GmbH as legal form in the future.

With the financial results in 2021/22, BOGNER has achieved the most successful financial year since 2015. A key contribution to this was provided by the performance program developed with the management consultancy EY Parthenon in July 2020. Since then, it was implemented as planned and successfully promoted profitability and sustainable global growth. In order to create the ideal framework conditions for further success, BOGNER is now simplifying its management, governance and corporate structures.

Gerrit Schneider takes over as sole CEO
Gerrit Schneider, Co-CEO of BOGNER since April 2020 and responsible for Finance, Legal, IT, Operations and HR, will take over the sole CEO role of BOGNER with immediate effect. Heinz Hackl, present Co-CEO of BOGNER and currently responsible for Sales, Design, Marketing and Licensing, will leave BOGNER by mutual agreement.

The former BOGNER CEO Andreas Baumgaertner (2017-2020) will move closer to the management for all product- and design-specific topics and will intensify his advisory role. He has already advised the company in the background in recent years and will now accompany and help to shape the future direction of the brand even more closely. As for the external media presence, BOGNER secures further know-how and experience with Andreas Gall, the former founding CEO and Chief Innovation Officer (CINO) of Red Bull Media House.

Streamlined structures with end of trusteeship and new active advisory board
In addition to the management, BOGNER is also refining its governance structures: With the successful completion of the performance programm, trustee Arndt Geiwitz has achieved the goal he has set together with management and family to bring BOGNER in a strong position. Now he returns the company back to the family. Arndt Geiwitz will remain closely associated with BOGNER and will accompany the company in its further development as Chairman of the newly created advisory board.

Furthermore, BOGNER changes the legal form of the company to a GmbH (limited liability company) and merges individual group companies as part of this step. This simplifies the corporate structures and reduces complexity. As part of this adjustment, BOGNER is setting up an advisory board with supervisory function. The advisory board, staffed with experienced personalities, will advise the management comprehensively on the strategic direction, function as a sparring partner and serve as a supervisory body. In addition to Arndt Geiwitz as Chairman, Christian Laus, a long-standing advisor of the Bogner family and Managing Director of BOGNER Film GmbH, will become a member of the advisory board. Furthermore, Dr. Daniel Heine, Managing Director of Patrimonium Asset Management AG, will join the advisory board. A private debt fund of Patrimonium Asset Management AG as strategic financing partner and BOGNER have signed financial agreements to replace the loan agreement concluded with various banks as part of the performance program.

Source:

Willy BOGNER GmbH

(c) Hologenix, LLC
18.11.2022

Hologenix® celebrates 20-year anniversary

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

The first partnership Hologenix secured was with the Ireland-based fiber company Wellman International Limited, a fully owned subsidiary of Indorama Ventures and a pioneer in recycling technologies. Hologenix still works with them today, a tribute to the company’s ability to form long-term partnerships with like-minded organizations, and their joint project of pure white CELLIANT rPET fiber was shortlisted for a prestigious Drapers Sustainable Fashion Award earlier in the year.

On the brand side, many of the first brands to incorporate CELLIANT were in the sportwear industry, including Adidas, Reebok, Saucony, Eastern Mountain Sports, Sierra Designs sleeping bags and Superfeet insoles.

In 20 years, Hologenix has achieved many scientific milestones, and CELLIANT has been and continues to be rigorously tested by a Science Advisory Board composed of experts in photobiology, nanotechnology, sleep medicine, and diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that demonstrate CELLIANT’s effectiveness and the benefits of infrared energy.

Looking ahead, Hologenix is continuing to research applications for CELLIANT in the agriculture industry and wound healing and diabetes. Expansion into the FemTech market with both product applications and scientific research about the benefits of infrared for women’s health issues is also on the horizon.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

comfortemp® nature Lyocell HO 60x Bild Freudenberg
comfortemp® nature Lyocell HO 60x
16.11.2022

Freudenberg presents sustainable product innovations at ISPO 2022

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

The independent jury has nominated the 100 percent biodegradable thermal insulation comfortemp® nature Lyocell HO 60x, made from Lyocell regenerated fibers, for the Textrends Award fall/winter 2024/25 season. The award is given exclusively to innovative products that are groundbreaking for the development of the textile industry. comfortemp® nature Lyocell HO 60x has a variety of extraordinary performance characteristics as a high warmth retention, bacteria inhibiting and fast drying, furthermore water repellent. High wearing comfort and the assurance of a perfect moisture balance characterize the volume fleece as ideal for the application in sportswear.

Freudenberg is presenting its entire European and global product portfolio from its "House of Sustainability" at ISPO. The "House of Sustainability" supports Freudenberg in minimizing its ecological footprint and maximizing its ecological handprint. For this purpose, the company's own manufacturing processes are designed to minimize the impact on the environment. In addition, products are developed to help customers produce more sustainably.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Photo: LYCRA® naturalFX™ technology powered by HeiQ
LYCRA® naturalFX™ technology powered by HeiQ
15.11.2022

HeiQ and The LYCRA Company: Added-value technology for cotton knitwear

  • LYCRA® naturalFX™ technology offers durable comfort stretch and fit for 100% cotton knitwear.

HeiQ and The LYCRA Company created a new and durable solution for 100% cotton fabric, adding stretch and recovery properties while keeping it fully recyclable.

HeiQ, a leader in performance finish technologies, and The LYCRA Company, a leader in developing innovative and sustainable fiber and technology solutions for the apparel and personal care industries, announced the launch of LYCRA® naturalFX™ technology, a proprietary textile finishing process for 100% cotton knit garments designed for mass market applications.

LYCRA® naturalFX™ technology, powered by HeiQ, enhances cotton knitwear, addressing critical consumer pain points, and improving the consumer’s overall wearing experience. This technology provides durable comfort stretch, fit, and soft hand-feel to 100% cotton knitwear compared to conventional finishes. Even after repeated washing and wearing, LYCRA® naturalFX™ technology helps knitwear retain its shape, which helps extend the garment’s lifespan and potentially reduce its environmental impact.

Source:

HeiQ

(c) Hologenix, LLC
15.11.2022

Medline and Hologenix launch new orthopedic infrared products

Medline, a medical product distributor and manufacturer, together with Hologenix® launched a new line of CURAD® Performance Series® orthopedic products powered by CELLIANT® infrared technology.

CELLIANT, the flagship innovation of Hologenix, is a proprietary blend of natural minerals that allows textiles to convert body heat into infrared energy, returning it to the body and temporarily increasing local blood flow and cellular oxygenation. This has been clinically demonstrated to support recovery from physical activity and fatigue, increase endurance and stamina, and boost overall performance in healthy individuals, among other benefits.  

Trusted by athletes, CURAD is the Official Medical Supplier of the IRONMAN® U.S. Series. The new orthopedic products powered by CELLIANT infrared technology are the latest additions to the CURAD Performance Series collection and including different infrared supports designed for the ankle, knee, back, shoulder, as well as multipurpose use.

Medline, a medical product distributor and manufacturer, together with Hologenix® launched a new line of CURAD® Performance Series® orthopedic products powered by CELLIANT® infrared technology.

CELLIANT, the flagship innovation of Hologenix, is a proprietary blend of natural minerals that allows textiles to convert body heat into infrared energy, returning it to the body and temporarily increasing local blood flow and cellular oxygenation. This has been clinically demonstrated to support recovery from physical activity and fatigue, increase endurance and stamina, and boost overall performance in healthy individuals, among other benefits.  

Trusted by athletes, CURAD is the Official Medical Supplier of the IRONMAN® U.S. Series. The new orthopedic products powered by CELLIANT infrared technology are the latest additions to the CURAD Performance Series collection and including different infrared supports designed for the ankle, knee, back, shoulder, as well as multipurpose use.

“This new CURAD Performance Series offering represents a major expansion of CELLIANT infrared (IR) bio-responsive textiles into the sports medicine field,” said Seth Casden, Hologenix Co-Founder and CEO. “We are honored to partner with Medline and look forward to future introductions.”

In addition to the inclusion of CELLIANT infrared technology, Medline has engineered the elastic supports to provide targeted compression for enhanced local circulation that helps reduce swelling, with a contoured fit that won’t slip or shift during normal activities with silicone grips that keep the product in place.

The removable hot/cold therapy supports provide adjustable compression and a gel compress that can be cooled or heated to further reduce swelling and discomfort.

Source:

Hologenix, LLC /  Sarah Fletcher Communication

(c) adidas AG
RIMOWA x adidas NMD S1
14.11.2022

adidas Originals and RIMOWA announce collaborative partnership

adidas and RIMOWA have come together to announce their inaugural capsule collection that seeks to offer explorers of the world the perfect tools to navigate and escape the cities of today.

Exclusively made in Germany, the cross-category collection features two contemporary designs: RIMOWA’s first-ever aluminium backpack and the ADIDAS NMD_S1 sneaker.

The RIMOWA x ADIDAS NMD_BACKPACK boasts new technical solutions that makes it suitable for outdoor needs and overnight trips. Made from RIMOWA’s signature grooved aluminium, it features a number of thoughtful functionalities, from padded utility shoulder straps fitted with a carabin and thumb loops to rope weight-bearing straps and grab handle. The piece also features foam ridges inspired by ADIDAS Boost foam overlaying the backpack’s grooved surface to ensure comfort, as well as an elasticated webbing running through its middle to secure the backpack onto the suitcase’s telescopic tubes. To allow for flat packing, a detachable gusset opens the backpack to reveal two deep zipped pockets, as well as a 16-inch laptop pocket inscribed with both brands’ logos.

adidas and RIMOWA have come together to announce their inaugural capsule collection that seeks to offer explorers of the world the perfect tools to navigate and escape the cities of today.

Exclusively made in Germany, the cross-category collection features two contemporary designs: RIMOWA’s first-ever aluminium backpack and the ADIDAS NMD_S1 sneaker.

The RIMOWA x ADIDAS NMD_BACKPACK boasts new technical solutions that makes it suitable for outdoor needs and overnight trips. Made from RIMOWA’s signature grooved aluminium, it features a number of thoughtful functionalities, from padded utility shoulder straps fitted with a carabin and thumb loops to rope weight-bearing straps and grab handle. The piece also features foam ridges inspired by ADIDAS Boost foam overlaying the backpack’s grooved surface to ensure comfort, as well as an elasticated webbing running through its middle to secure the backpack onto the suitcase’s telescopic tubes. To allow for flat packing, a detachable gusset opens the backpack to reveal two deep zipped pockets, as well as a 16-inch laptop pocket inscribed with both brands’ logos.

The RIMOWA x ADIDAS NMD_S1 iteration features the futuristic sneaker’s signature Primeknit uppers in a titanium-inspired colourway, with the flexible ADIDAS Boost midsole in a light, almost translucent base colour.

More information:
adidas rimowa Sportswear
Source:

adidas AG

(c) Robin Inizan – Lucas Pavy Production
Tearing line by ANDRITZ in operation at the Renaissance Textile plant
11.11.2022

Renaissance Textile starts up the first textile recycling line by ANDRITZ in France

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

The new clothing produced based on this type of circular economy model thus reflects the social and sustainability commitments of Renaissance Textile in terms of decarbonizing the textile industry, the fight against global warming, autonomy in raw material sourcing, and promotion of local staffing, particularly for people who have been unemployed for a long time or are seeking to enter the labor market for the first time. By 2025, for example, Renaissance Textile plans to create no less than 110 direct jobs.