From the Sector

Reset
130 results
Das Team des FTB der Hochschule Niederrhein zu Besuch bei der Firma Bache Innovative, mit der es im Rahmen von „KnitCycle“ Recycling-Versuche durchführt. Dazu wurden erste textile Produktionsabfälle klassifiziert und sortiert. Foto Hochschule Niederrhein
Das Team des FTB der Hochschule Niederrhein zu Besuch bei der Firma Bache Innovative, mit der es im Rahmen von „KnitCycle“ Recycling-Versuche durchführt. Dazu wurden erste textile Produktionsabfälle klassifiziert und sortiert.
19.03.2024

KnitCycle: Forschungsprojekt für kreislaufgerechte Flachstrick-Textilien

87 Prozent des weltweiten Textilabfalls in der Bekleidungsindustrie landen auf Deponien oder werden verbrannt. Von den 13 Prozent, die noch mechanisch weiterverarbeitet werden, enden die meisten Alttextilien als Dämmmaterial (Downcycling). Nicht einmal ein Prozent werden zu hochwertigen Fasern aufbereitet, aus denen wieder neue Kleidung entsteht.
 
Gemeinsam mit Bache Innovative als Antragstellerin hat die Hochschule Niederrhein (HSNR) ein großes Forschungsprojekt gestartet: „KnitCycle – kreislaufgerechte Produktentwicklung für Flachstricktextilien“. Die Deutsche Bundesstiftung Umwelt (DBU) fördert das Vorhaben für zwei Jahre mit insgesamt rund 290.000 Euro, davon fließen 225.000 Euro an die HSNR.
 
Wo Textilabfall recycelt und damit in den Kreislauf zurückgeführt werden kann, muss auch weniger entsorgt werden. Werden Produktionsabfälle und -überhänge vernichtet, ist das nicht nur teuer für die Unternehmen. Für die Herstellung neuer Kleidung müssen auch wieder neue Fasern erzeugt werden. Je nach Faserstoff kommt es dabei zu großem Wasserverbrauch, starkem Pestizid- und Düngemitteleinsatz sowie langen Transportwegen mit hohen CO2-Emissionen.  

87 Prozent des weltweiten Textilabfalls in der Bekleidungsindustrie landen auf Deponien oder werden verbrannt. Von den 13 Prozent, die noch mechanisch weiterverarbeitet werden, enden die meisten Alttextilien als Dämmmaterial (Downcycling). Nicht einmal ein Prozent werden zu hochwertigen Fasern aufbereitet, aus denen wieder neue Kleidung entsteht.
 
Gemeinsam mit Bache Innovative als Antragstellerin hat die Hochschule Niederrhein (HSNR) ein großes Forschungsprojekt gestartet: „KnitCycle – kreislaufgerechte Produktentwicklung für Flachstricktextilien“. Die Deutsche Bundesstiftung Umwelt (DBU) fördert das Vorhaben für zwei Jahre mit insgesamt rund 290.000 Euro, davon fließen 225.000 Euro an die HSNR.
 
Wo Textilabfall recycelt und damit in den Kreislauf zurückgeführt werden kann, muss auch weniger entsorgt werden. Werden Produktionsabfälle und -überhänge vernichtet, ist das nicht nur teuer für die Unternehmen. Für die Herstellung neuer Kleidung müssen auch wieder neue Fasern erzeugt werden. Je nach Faserstoff kommt es dabei zu großem Wasserverbrauch, starkem Pestizid- und Düngemitteleinsatz sowie langen Transportwegen mit hohen CO2-Emissionen.  
 
Die Projektpartner erarbeiten ein Konzept, mit dem gestrickte Produkte so entwickelt werden können, dass sie sich am Produktlebensende durch ein Faser-zu-Faser-Recycling zu hochwertigen Fasern neu aufbereiten lassen. Aus diesen Fasern kann anschließend neues, industriell verarbeitbares Garn für Bekleidung hergestellt werden, das im Idealfall später abermals recycelt werden kann.
 
Unter dem Motto „Design for Recycling“ analysieren die Partner, welche Faktoren und Verfahren am besten geeignet sind, Textilien schon bei ihrer Entstehung so zu planen, dass sie am Produktlebensende optimal recyclingfähig sind. Gleichzeitig dürfen sich Ästhetik, Qualität und Langlebigkeit der Produkte nicht verschlechtern. Die Frage ist also: Welche Parameter im mechanischen Recycling werden benötigt und welche Produkteigenschaften erzielen das beste kreislauffähige Ergebnis?
 
„KnitCycle“ konzentriert sich auf Pulloverwaren und Produkte, die auf Flachstrickmaschinen endformgerecht in Deutschland produziert werden. Dafür liefert und produziert die auf 3D-Strickwaren spezialisierte Firma Bache Innovative eigenes Abfall- und Forschungsmaterial.
 
Unterstützung mit Experten-Knowhow gibt es auch von TURNS Faserkreisläufe. Dieses Unternehmen stellt recycelte Garne aus verschiedenen gebrauchten, ausrangierten Alttextilien her.
 
Die Faser-zu-Faser-Recycling-Versuche finden am hochschuleigenen Forschungsinstitut für Textil und Bekleidung (FTB) statt. Dazu schafft die HSNR von dem Fördergeld eine Reißmaschine für das Textilrecycling an. Hiermit werden vor Ort die optimalen Prozessparameter für das Recycling der jeweiligen Produkttypen ermittelt. Die in diesem Prozess gewonnenen Reißfasern werden dann u.a. mit Unterstützung der Firma Textechno H. Stein GmbH & Co. KG aus Mönchengladbach analysiert und bewertet.

Mittels unterschiedlicher Aufbereitungs- und Spinnverfahren werden aus den Reißfasern anschließend neue Garne hergestellt. Die Forschenden testen, wie sich die Fasern wiederverspinnen lassen – auch in Kombination mit anderen Naturfasern, um mit möglichst hochwertigen neuen Produkten den Produktkreislauf zu schließen.

An Labor-Strickmaschinen erzeugt das FTB-Team erste 2D-Strickproben. Die finalen Strickprodukte aus den recycelten Garnen stellt der Kooperationspartner Bache Innovative her. 

Source:

Hochschule Niederrhein

08.03.2024

Rieter: Partnership with Shanghai's DIW

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

Rieter and DIW signed a first order in the amount of around CHF 62 million for combers and draw frames that will provide the basis to transform DIW’s spinning mills into state-of-the-art industrial textile operations. DIW, a fast-growing company specializing in intelligent manufacturing and industrial operation services, selected Rieter following a competition in which the company’s machines achieved better stability and higher production than competitors. The strategic partnership of DIW and Rieter is designed to further enhance the overall operational efficiency of DIW’s mills by providing highly efficient machines, automation and digitization technology. This will also minimize conversion cost and consolidate the sustainable growth of both companies, while contributing to the high-quality development of the Chinese textile industry.

Source:

Rieter Management AG

06.03.2024

SHIMA SEIKI at FIMEC 2024 in Brazil

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

More information:
Shima Seiki FIMEC shoes Brazil
Source:

SHIMA SEIKI MFG., LTD

26.02.2024

SHIMA SEIKI at Knit-Tech 2024

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

Design is demonstrated on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Source:

SHIMA SEIKI MFG., LTD

07.02.2024

Rieter wins Patent Dispute in China

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

The culpable competitor then appealed the decision of the Shanghai court to the Supreme People’s Court of the People’s Republic of China.

In December 2023, the Supreme Court of China in Beijing upheld the Shanghai decision, confirming that the patent had been infringed. As a result, Rieter’s competitor is prohibited from selling the infringing machine types and is required to pay the damages determined by the court.

This Supreme Court decision represents a major success for Rieter in defending its proprietary technologies in China. It is further proof that foreign companies can effectively defend their intellectual property in China.

As the technology leader in spinning machinery manufacturing, Rieter invests around 5% of its turnover annually in research and development. Rieter protects its innovative products with patents and registered designs and takes consistent action against infringements of industrial property rights.

More information:
legal dispute patent China
Source:

Rieter AG

AMPI illustration AMPI illustration
30.01.2024

FET: £50,000 for spinneret research

Fibre Extrusion Technology Limited (FET) has been awarded £50,000 of grant funding to collaborate with the University of Manchester on complex spin pack and spinneret designs. This funding will provide FET with access to the expertise of four universities and the National Physical Laboratory to develop the next generation of machinery.

The grant is awarded by a consortium led by AMPI (The Advanced Machinery and Productivity Institute) and NPL (The National Physical Laboratory). AMPI’s Innovation for Machinery (I4M) programme supports businesses in West Yorkshire and Greater Manchester as part of an overall initiative to drive innovation for the UK’s advanced machinery manufacturers to meet the challenges of developing new technology and entering emerging markets.

Fibre Extrusion Technology Limited (FET) has been awarded £50,000 of grant funding to collaborate with the University of Manchester on complex spin pack and spinneret designs. This funding will provide FET with access to the expertise of four universities and the National Physical Laboratory to develop the next generation of machinery.

The grant is awarded by a consortium led by AMPI (The Advanced Machinery and Productivity Institute) and NPL (The National Physical Laboratory). AMPI’s Innovation for Machinery (I4M) programme supports businesses in West Yorkshire and Greater Manchester as part of an overall initiative to drive innovation for the UK’s advanced machinery manufacturers to meet the challenges of developing new technology and entering emerging markets.

In this project, FET will be working with the University of Manchester to conduct computational fluid dynamics (CFD) studies on a number of complex spin pack and spinneret designs. The aim of this work is to identify areas of improvement for FET’s spin packs and spinnerets and to use computer aided designs to develop significantly more efficient versions. The goal is that the research will improve the throughput of FET extrusion systems, thus reducing the amount of polymer lost through inefficient flow paths. This development, in turn, will reduce the environmental impact of synthetic polymer processing.

FET designs, develops, and manufactures extrusion equipment for a range of high value textile material applications worldwide. Established in 1998, FET’s major strength has always been to collaborate with customers in testing, evaluating and developing high value materials with diverse, functional properties. Efficiency and sustainability are key, so enhanced development of spinneret technology will contribute significantly to these objectives.

MACH2®XS Photo SHIMA SEIKI MFG., LTD.
MACH2®XS
28.01.2024

SHIMA SEIKI at Dhaka International Textile & Garment Machinery Exhibition 2024

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

The company is showing its MACH2®XS153 WHOLEGARMENT® knitting machine in 15L gauge, as well as its SWG®091N2 "Mini" WHOLEGARMENT® knitting machine in 15 gauge. MACH2®XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® knitwear in all needles. SWG®091N2 provides opportunities in WHOLEGARMENT® knitting across a wide range of items in a compact, economical package. A different approach to WHOLEGARMENT knitting is also shown in the form of the N.SVR®183 machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. Shown in 18 gauge at DTG, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

Demonstrations are performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides comprehensive support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Source:

SHIMA SEIKI MFG., LTD.

KARL MAYER: Launch of new tricot machine TM 4 EL (c) KARL MAYER GROUP
24.01.2024

KARL MAYER: Launch of new tricot machine TM 4 EL

At the end of last year, KARL MAYER launched the TM 4 EL – a new, highly flexible machine for the mid-range segment in the four-bar tricot machine sector. The machine produces fabrics for upholstery, automotive interiors and outerwear, as well as sportswear items and home textiles.

Featuring KARL MAYER’s proven CFRP technology, the TM 4 EL is up to 30% faster than the previous four-bar tricot machine designed for the commodity sector.

The new TM 4 EL is offered in gauges E 28 and E 32. The available working widths are 210” and 280”, with a working width extension also available. Further width varieties are also planned. Equipment highlights include an integrated Laser Stop to detect yarn breakages early, and functional LED lighting, which illuminates the warp knitting area for easy handling and signals unplanned machine stops using the corresponding colour. The machine can be networked with KM.ON’s secure cloud via the k.ey device to utilise the KARL MAYER GROUP’s digital solutions. This includes, for example, the web-based lapping editor CORE LITE.

At the end of last year, KARL MAYER launched the TM 4 EL – a new, highly flexible machine for the mid-range segment in the four-bar tricot machine sector. The machine produces fabrics for upholstery, automotive interiors and outerwear, as well as sportswear items and home textiles.

Featuring KARL MAYER’s proven CFRP technology, the TM 4 EL is up to 30% faster than the previous four-bar tricot machine designed for the commodity sector.

The new TM 4 EL is offered in gauges E 28 and E 32. The available working widths are 210” and 280”, with a working width extension also available. Further width varieties are also planned. Equipment highlights include an integrated Laser Stop to detect yarn breakages early, and functional LED lighting, which illuminates the warp knitting area for easy handling and signals unplanned machine stops using the corresponding colour. The machine can be networked with KM.ON’s secure cloud via the k.ey device to utilise the KARL MAYER GROUP’s digital solutions. This includes, for example, the web-based lapping editor CORE LITE.

Source:

KARL MAYER GROUP

22.01.2024

SHIMA SEIKI at Pitti Filati 94

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 94th edition of the Pitti Immagine Filati exhibition in Florence, Italy (24th-26th January 2024). It will exhibit as part of the CustomEasy section, which involves the concept of Fashion at Work and explores customization in the presence of textile machinery and design software, represented in part by SHIMA SEIKI's lineup of WHOLEGARMENT® knitting machines and APEXFiz® design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 94th edition of the Pitti Immagine Filati exhibition in Florence, Italy (24th-26th January 2024). It will exhibit as part of the CustomEasy section, which involves the concept of Fashion at Work and explores customization in the presence of textile machinery and design software, represented in part by SHIMA SEIKI's lineup of WHOLEGARMENT® knitting machines and APEXFiz® design software.

The new SWG-XR® flagship machine features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle™, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at Pitti Filati will be shown in 15L and 18L as well as a prototype machine in 22L.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes. By replacing physical samples, virtual samples reduce time, cost and material that otherwise go to waste.

The product planning capability of APEXFiz® is enhanced by several web services featured as part of the SHIMA SEIKI Online Services (SHIMA online) web platform. These include SHIMA Datamall™ digital content web service that allows users to search, browse and purchase a variety of useful data for streamlining the planning and production of fashion items, as well as the recently renewed yarnbank® digital yarn sourcing web service that offers digitized yarn data by yarn companies from around the world for download and use in virtual sampling. SHIMANAVI® e-learning system is also part of the online platform.

Source:

SHIMA SEIKI

Teams from Lonati, Lubrogamma and Vickers during a recent meeting at the Vickers HQ in Leeds, UK. Photo: AWOL
Teams from Lonati, Lubrogamma and Vickers during a recent meeting at the Vickers HQ in Leeds, UK.
15.01.2024

Vickers Oils: Reliable running for Lonati’s knitting machines

BTMA member Vickers Oils has marked an important milestone in its partnership with knitting machinery leader Lonati by earning Original Equipment Manufacturer (OEM) approval for its VICKERLUBE SOCK 46 needle oil.

VICKERLUBE SOCK 46 is a mineral-based needle lubricant designed to meet the criteria for modern knitting machine technology. It provides a high standard of lubrication as well as holding very good stability properties and having a high resistance to oxidation. The product is readily scourable and holds a well-balanced additive system meaning that it is fully compatible with all machine components. It can also be used with machines producing any yarn type – including tricky elastanes – to produce the highest quality end product.

Lonati, headquartered in Brescia, Italy, has been a prominent name in knitting machines for over 70 years, designing and manufacturing an impressive average of 8,000 annually. It places a strong emphasis on delivering the highest quality textile machinery, underpinned by a commitment to research and development that ensures the use of cutting-edge products, technologies and processes in its machines.

BTMA member Vickers Oils has marked an important milestone in its partnership with knitting machinery leader Lonati by earning Original Equipment Manufacturer (OEM) approval for its VICKERLUBE SOCK 46 needle oil.

VICKERLUBE SOCK 46 is a mineral-based needle lubricant designed to meet the criteria for modern knitting machine technology. It provides a high standard of lubrication as well as holding very good stability properties and having a high resistance to oxidation. The product is readily scourable and holds a well-balanced additive system meaning that it is fully compatible with all machine components. It can also be used with machines producing any yarn type – including tricky elastanes – to produce the highest quality end product.

Lonati, headquartered in Brescia, Italy, has been a prominent name in knitting machines for over 70 years, designing and manufacturing an impressive average of 8,000 annually. It places a strong emphasis on delivering the highest quality textile machinery, underpinned by a commitment to research and development that ensures the use of cutting-edge products, technologies and processes in its machines.

Vickers Oils, based in Leeds, West Yorkshire, shares these values, leading the industry in quality and assurance through its continuous focus on research and development, technological leadership, quality control and customer service. As it has done for almost two centuries – the company will mark its 200th anniversary in 2028.

Lonati is now officially recommending VICKERLUBE SOCK 46 for use in its single-cylinder GOAL series of knitting machines, marking a successful collaboration that required dedicated efforts from the teams of Lonati, Vickers Oils and its Italian representative Lubrogamma. Vickers Oils is committed to sustainable product development and VICKERLUBE SOCK 46 meets the clearly defined criteria set out by the Global Organic Textile Standard (GOTS) and conforms to ZDHC MRSL Level 1 certification.

Source:

AWOL Media

flat knitting machine © Knitwear Lab
09.01.2024

Knitwear Lab relies on CREATE PLUS patterning software by STOLL

The Dutch company Knitwear Lab helps visions become reality. The creative think tank offers capacities in the areas of R&D, design, knitwear development and production of prototypes and small quantities and has thus implemented a wide range of projects in recent years. The objects range from medical products and high-tech sportswear to smart textiles with integrated sensors. Sustainability activities are also part of the repertoire, such as the production of yarns from recycled waste.

The Dutch company Knitwear Lab helps visions become reality. The creative think tank offers capacities in the areas of R&D, design, knitwear development and production of prototypes and small quantities and has thus implemented a wide range of projects in recent years. The objects range from medical products and high-tech sportswear to smart textiles with integrated sensors. Sustainability activities are also part of the repertoire, such as the production of yarns from recycled waste.

Knitwear Lab operates at two locations for its diverse tasks: Almere in the Netherlandsis available for development work. In Istanbul, there is a branch for production. Both Knitwear Lab sites each have five STOLL flat knitting machines, including models from the modern ADF range. Prototypes are produced in Almere and there is small-scale production. The production plant in Istanbul specializes in the manufacture of high-quality knitwear in small quantities. STOLL is also involved in the creative processes. For the industrial development of knitwear, Knitwear Lab offers Virtual Knitting, a revolutionary method that combines virtual and physical elements of pattern development and knitwear production to reduce waste and pre-production steps. Customers can use Virtual Knitting to create realistic, producible collections, simplify their design iteration processes and take advantage of the wide range of real-life colorways. The basis for this is comprehensive knitwear expertise, the latest 3D software and the CREATE PLUS patterning software, which was developed by STOLL together with KM.ON.

"The 3D visualization of CREATE simplifies communication with the customer considerably. We use this function every day," says Annika Klaas, Senior Knitwear Programmer. She personally appreciates the uncomplicated grading and exchange of stitch dimensions and the much faster and more efficient work with Dimensioned Shapes that this makes possible. This helps her in her day-to-day work. "We often have requests to realize the same product in different yarns, which now works much faster," says the programmer. Further simplifications would include minor optimizations in terms of the efficiency and user-friendliness of programming and additional import and export options for shapes. Discussions on implementation are already underway.

Source:

KARL MAYER GROUP

(c) A. Monforts Textilmaschinen GmbH & Co. KG
05.01.2024

Monforts: New Stenter line installed at Curt Bauer

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Sunrise Image by Mohamed Hassan, Pixabay

Happy Birthday 2024

Happy New Year 2024! Here's to a year full of innovation and success in the textile and apparel industry.

The Textination team sincerely wishes you a great start: may 2024 be full of health, joy and energy for you.

There are undoubtedly 365 days of exciting encounters, developments, innovations and new trends ahead in our shared world of the textile and apparel industry. We would like to join you on this journey and document the many facets of our industry.

We are convinced that the new year will be just as fascinating and inspiring for our users as the best textile products and designs that our industry has to offer. We look forward to accompanying you through the coming 12 months with the latest news, in-depth analyses and exclusive insights.

Thank you for your continued support and interest in Textination.

Together we will tell textile tomorrow!

Ines Chucholowius
- Managing Director -

Happy New Year 2024! Here's to a year full of innovation and success in the textile and apparel industry.

The Textination team sincerely wishes you a great start: may 2024 be full of health, joy and energy for you.

There are undoubtedly 365 days of exciting encounters, developments, innovations and new trends ahead in our shared world of the textile and apparel industry. We would like to join you on this journey and document the many facets of our industry.

We are convinced that the new year will be just as fascinating and inspiring for our users as the best textile products and designs that our industry has to offer. We look forward to accompanying you through the coming 12 months with the latest news, in-depth analyses and exclusive insights.

Thank you for your continued support and interest in Textination.

Together we will tell textile tomorrow!

Ines Chucholowius
- Managing Director -

More information:
Textination FUTURE
Source:

Textination

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

Complete ANDRITZ textile recycling line for Italian recycling specialist Photo: ANDRITZ
08.12.2023

Complete ANDRITZ textile recycling line for Italian recycling specialist

ANDRITZ recently started up a new textile recycling line at Sfilacciatura Negro’s plant in Biella, Italy. Designed for processing post-consumer textile waste with automatic removal of hard parts, the tearing line supports the company’s expansion into new recycling segments.

In view of the growing demand for sustainable fibers in the re-spinning and nonwoven industries, Sfilacciatura Negro Biella decided to expand its recycling capabilities. The company has extensive experience in recycling industrial textile waste and already operates two tearing lines. Based on its long-term collaboration with ANDRITZ, it is now stepping into the recycling of post-consumer clothing waste.

ANDRITZ recently started up a new textile recycling line at Sfilacciatura Negro’s plant in Biella, Italy. Designed for processing post-consumer textile waste with automatic removal of hard parts, the tearing line supports the company’s expansion into new recycling segments.

In view of the growing demand for sustainable fibers in the re-spinning and nonwoven industries, Sfilacciatura Negro Biella decided to expand its recycling capabilities. The company has extensive experience in recycling industrial textile waste and already operates two tearing lines. Based on its long-term collaboration with ANDRITZ, it is now stepping into the recycling of post-consumer clothing waste.

The new generation recycling line ANDRITZ supplied to Sfilacciatura Negro is the result of ten years of close cooperation, trials in its technical center, and visits to customer lines in Spain and Portugal. ANDRITZ has tailored a complete line from feeding of sorted waste bales to baling of the recycled fibers. It is designed for highly efficient, energy-saving operation and features automated separation of hard points while maintaining a good material yield. An automated filtration unit is provided for airflow and dust management. Only one operator is needed to manage the entire line up to the recycled fiber baler. The baler can produce film-wrapped and tied bales with a weight of up to 350 kg.

Source:

ANDRITZ AG

Easy Cut Studio: Cutting software with Nesting Feature (c) EasyCut
22.11.2023

Easy Cut Studio: Cutting software with Nesting Feature

EasyCut Studio, a developer of sign-making software solutions, has launched a new enhancement to its vinyl cutting software, Easy Cut Studio, which now includes true shape nesting.

This new feature enables all users to reduce their material waste in average by 40%. The option improves the arrangement of multiple objects per job by rearranging the objects based on their actual shape.

In addition to the new nesting feature, this update also includes more than 10 new cutter drivers, the official support of macOS Sonoma, several bug fixes, compatible with several new vinyl cutters and improvements to the stability and performance of the software, enabling users to design, print and cut more efficiently.

EasyCut Studio, a developer of sign-making software solutions, has launched a new enhancement to its vinyl cutting software, Easy Cut Studio, which now includes true shape nesting.

This new feature enables all users to reduce their material waste in average by 40%. The option improves the arrangement of multiple objects per job by rearranging the objects based on their actual shape.

In addition to the new nesting feature, this update also includes more than 10 new cutter drivers, the official support of macOS Sonoma, several bug fixes, compatible with several new vinyl cutters and improvements to the stability and performance of the software, enabling users to design, print and cut more efficiently.

Source:

EasyCut

Santoni finalizes Acquisition of Terrot (c) Santoni / Terrot
22.11.2023

Santoni finalizes Acquisition of Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Seeking to meet rising demand for high-end circular knitting products, Santoni has pursued an Ecosystem Strategy in recent years, aiming to unify a highly fragmented industry and enhance innovation, sustainability and digitalization to more effectively meet market needs. The deployment of both parties' latest innovation practices, textile automation offerings, integrated enterprise services, C2M solutions, and a platform for designers "Materialliance", will allow Santoni Shanghai and Terrot to connect and bridge demand and offer of circular knitted products.

By incorporating Terrot's offerings, particularly in the double jersey and jacquard sector, Santoni stands to gain a competitive edge in offering machines known for their performance, low maintenance, and cost-effectiveness. Highlighting this shift is Terrot's UCC 572-T, a transfer jacquard machine for sports and leisurewear.

Following the acquisition, Terrot will continue to operate under the leadership of managing directors Robert W. Czajkowski and Dirk Lange. Santoni plans to maintain Terrot’s headquarters in Chemnitz, Germany, along with its facilities, brands, and practices.

Source:

Terrot GmbH

18.10.2023

SHIMA SEIKI at A+A 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI's original SPG®, developed in 1979 as the world’s first automatic glove knitting machine to produce seamless pile-knitted gloves, is now reborn as a next-generation model. Pile gloves feature special traits that include cushioning, shock-reduction and thermal insulation and cold protection, making them popular especially in the field of industrial safety. Now, SPG® is redesigned from the ground up and re-introduced as the SPG®-R. The new SPG®-R features a new moveable sinker system with selectable loop presser function. Combined with a new belt-driven carriage it allows SPG® to provide efficient and reliable production of fashionable, high-quality pile gloves. Shown in 7 gauge at A+A, SPG®-R surpasses the previous generation with pioneering technology, improved capability and reliable productivity.

SHIMA SEIKI's original product on which the company was founded was the fully automated seamless glove knitting machine. While the original model evolved to become the current SFG® series, SFG®-R exhibited at A+A is its spiritual successor. With a new sinker system, a belt-driven 2-cam carriage and auto yarn carriers SFG®-R is a completely new machine for knitting gloves that conform better to the shape of the hand for improved fit. Furthermore its greater design potential offers users the opportunity to break out of the work glove market and into the fashion market. SFG®-R is shown as a prototype next-generation model in 12 gauge at A+A.

Also demonstrated will be SHIMA SEIKI's APEXFiz® design software. The importance of design software is made even more significant by the new patterning capabilities of SPG®-R and SFG®-R. Both machines now feature increased design potential that allow each of their products—pile gloves and work gloves, respectively—to expand their market into fashion. APEXFiz® is available for developing these designs. Furthermore virtual sampling on APEXFiz® is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation, thereby minimizing the time, cost and resources normally required with sample-making, supporting smart, speedy and sustainable production.

Source:

SHIMA SEIKI MFG., LTD.

FET: Benefits of new polymer development (c) FET
FET’s Fibre Development Centre
06.10.2023

FET: Benefits of new polymer development

Fibre Extrusion Technology Ltd (FET) of Leeds, UK is celebrating a year of achievements since its new Fibre Development Centre was first opened. This period has shown a marked acceleration in the number of client technical trials conducted, involving the ever-increasing development of new polymers.

FET designs, develops and manufactures extrusion equipment for a range of high value textile material applications worldwide, offering melt spinning, wet spinning and spunbond/meltblown options. Since its inception in 1997, a major part of FET’s service portfolio has always been to collaborate with industrial and research establishments in testing, evaluating and developing high value materials with diverse, functional properties. FET’s previous Process Development Laboratory presided over the development of about 60 new polymer types in multifilament, monofilament and nonwoven formats.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK is celebrating a year of achievements since its new Fibre Development Centre was first opened. This period has shown a marked acceleration in the number of client technical trials conducted, involving the ever-increasing development of new polymers.

FET designs, develops and manufactures extrusion equipment for a range of high value textile material applications worldwide, offering melt spinning, wet spinning and spunbond/meltblown options. Since its inception in 1997, a major part of FET’s service portfolio has always been to collaborate with industrial and research establishments in testing, evaluating and developing high value materials with diverse, functional properties. FET’s previous Process Development Laboratory presided over the development of about 60 new polymer types in multifilament, monofilament and nonwoven formats.

Since the new Fibre Development Centre came on stream, this process has accelerated and the number of new polymers has now increased to over 70, with considerably enhanced facilities more than doubling capacity and increasing efficiency. Clients frequently spend several days on site participating in development trials and technical sales meetings, so the new Centre is designed to make their stay even more efficient and comfortable.

With more new trials booked for the rest of the year and well into 2024, it is expected that many more new polymers will be developed, with sustainable fibres leading the way.

Source:

Fibre Extrusion Technology Ltd (FET)

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line (c) Reifenhäuser GmbH & Co. KG Maschinenfabrik
06.10.2023

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik